def testOutputRate(self):
self.fdm.load_script(self.script_path)
# Check that the output is enabled by default
self.assertEqual(self.fdm.get_property_value("simulation/output/enabled"), 1.0)
# Check that the rate is consistent with the values extracted from the
# script and the aircraft definition
self.assertAlmostEqual(self.fdm.get_property_value("simulation/output/log_rate_hz"), self.rateHz, delta=1e-5)
self.fdm.run_ic()
for i in xrange(self.rate):
self.fdm.run()
output = Table()
output.ReadCSV(self.output_file)
# According to the settings, the output file must contain 2 lines in
# addition to the headers :
# 1. The initial conditions
# 2. The output after 'rate' iterations
self.assertEqual(output.get_column(0)[1], 0.0)
self.assertEqual(output.get_column(0)[2], self.rate * self.dt)
self.assertEqual(output.get_column(0)[2], self.fdm.get_property_value("simulation/sim-time-sec"))
def testDebugLvl(self):
fdm = CreateFDM(self.sandbox)
fdm.load_script(
self.sandbox.path_to_jsbsim_file('scripts', 'ball_orbit.xml'))
fdm.run_ic()
ExecuteUntil(fdm, 1000.)
ref, current = Table(), Table()
ref.ReadCSV(self.sandbox('BallOut.csv'))
del fdm
os.environ["JSBSIM_DEBUG"] = str(0)
fdm = CreateFDM(self.sandbox)
fdm.load_script(
self.sandbox.path_to_jsbsim_file('scripts', 'ball_orbit.xml'))
fdm.run_ic()
ExecuteUntil(fdm, 1000.)
current.ReadCSV(self.sandbox('BallOut.csv'))
diff = ref.compare(current)
self.longMessage = True
self.assertTrue(diff.empty(), msg='\n' + repr(diff))
def testTrimRestoresOutputSettings(self):
self.fdm.load_script(self.script_path)
# Disables the output during the initialization
self.fdm.set_property_value("simulation/output/enabled", 0.0)
self.fdm.run_ic()
# Check that the output remains disabled even after the trim is
# executed
while self.fdm.get_property_value("simulation/sim-time-sec") < self.trim_date + 2.0 * self.dt:
self.fdm.run()
self.assertEqual(self.fdm.get_property_value("simulation/output/enabled"), 0.0)
# Re-enable the output and check that the output rate is unaffected by
# the previous operations
self.fdm.set_property_value("simulation/output/enabled", 1.0)
frame = int(self.fdm.get_property_value("simulation/frame"))
for i in xrange(self.rate):
self.fdm.run()
output = Table()
output.ReadCSV(self.output_file)
# The frame at which the data is logged must be the next multiple of
# the output rate
self.assertEqual(int(output.get_column(0)[1] / self.dt), (1 + frame / self.rate) * self.rate)
def test_model_loading(self):
self.longMessage = True
self.BuildReference('c1724.xml')
output_ref = Table()
output_ref.ReadCSV(self.sandbox('JSBout172B.csv'))
self.ProcessAndCompare('aerodynamics')
self.ProcessAndCompare('autopilot')
self.ProcessAndCompare('flight_control')
self.ProcessAndCompare('ground_reactions')
self.ProcessAndCompare('mass_balance')
self.ProcessAndCompare('metrics')
self.ProcessAndCompare('propulsion')
self.ProcessAndCompare('system')
# The <output> section needs special handling. In addition to the check
# conducted by ProcessAndCompare with a directive file, we need to
# verify that the <output> tag has been correctly executed by JSBSim.
# In the case of the script c1724.xml, this means that the data output
# in JSBout172B.csv is the same between the reference 'output_ref' and
# the result 'mod' below where the <output> tag was moved in a separate
# file.
self.ProcessAndCompare('output')
mod = Table()
mod.ReadCSV(self.sandbox('JSBout172B.csv'))
diff = output_ref.compare(mod, 0.0)
self.assertTrue(diff.empty(),
msg='\nTesting section "output"\n'+repr(diff))
self.BuildReference('weather-balloon.xml')
self.ProcessAndCompare('buoyant_forces')
self.BuildReference('Concorde_runway_test.xml')
self.ProcessAndCompare('external_reactions')
def Compare(self, section):
# Rerun the script with the modified aircraft definition
self.sandbox.delete_csv_files()
fdm = CreateFDM(self.sandbox)
# We need to tell JSBSim that the aircraft definition is located in the
# directory build/.../aircraft
fdm.set_aircraft_path('aircraft')
fdm.set_output_directive(
self.sandbox.path_to_jsbsim_file('tests', 'output.xml'))
fdm.load_script(self.script)
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.run_ic()
ExecuteUntil(fdm, 50.0)
mod = Table()
mod.ReadCSV(self.sandbox('output.csv'))
# Whether the data is read from the aircraft definition file or from an
# external file, the results shall be exactly identical. Hence the
# precision set to 0.0.
diff = self.ref.compare(mod, 0.0)
self.assertTrue(diff.empty(),
msg='\nTesting section "' + section + '"\n' +
repr(diff))
def testOrbitCheckCase(self):
os.environ['JSBSIM_DEBUG'] = str(0)
fdm = CreateFDM(self.sandbox)
fdm.load_script(self.sandbox.path_to_jsbsim_file('scripts', 'ball_orbit.xml'))
fdm.run_ic()
while fdm.run():
pass
ref, current = Table(), Table()
ref.ReadCSV(self.sandbox.elude(self.sandbox.path_to_jsbsim_file('logged_data', 'BallOut.csv')))
current.ReadCSV(self.sandbox('BallOut.csv'))
diff = ref.compare(current)
self.longMessage = True
self.assertTrue(diff.empty(), msg='\n'+repr(diff))
def test_model_loading(self):
self.longMessage = True
self.BuildReference('c1724.xml')
output_ref = Table()
output_ref.ReadCSV(self.sandbox('JSBout172B.csv'))
self.ProcessAndCompare('aerodynamics')
self.ProcessAndCompare('autopilot')
self.ProcessAndCompare('flight_control')
self.ProcessAndCompare('ground_reactions')
self.ProcessAndCompare('mass_balance')
self.ProcessAndCompare('metrics')
self.ProcessAndCompare('propulsion')
self.ProcessAndCompare('system')
# The <output> section needs special handling. In addition to the check
# conducted by ProcessAndCompare with a directive file, we need to
# verify that the <output> tag has been correctly executed by JSBSim.
# In the case of the script c1724.xml, this means that the data output
# in JSBout172B.csv is the same between the reference 'output_ref' and
# the result 'mod' below where the <output> tag was moved in a separate
# file.
self.ProcessAndCompare('output')
mod = Table()
mod.ReadCSV(self.sandbox('JSBout172B.csv'))
diff = output_ref.compare(mod, 0.0)
self.assertTrue(diff.empty(),
msg='\nTesting section "output"\n' + repr(diff))
self.BuildReference('weather-balloon.xml')
self.ProcessAndCompare('buoyant_forces')
self.BuildReference('Concorde_runway_test.xml')
self.ProcessAndCompare('external_reactions')
def testDisablingOutput(self):
self.fdm.load_script(self.script_path)
# Disables the output during the initialization
self.fdm.set_property_value("simulation/output/enabled", 0.0)
self.fdm.run_ic()
self.fdm.set_property_value("simulation/output/enabled", 1.0)
for i in xrange(self.rate):
self.fdm.run()
output = Table()
output.ReadCSV(self.output_file)
# According to the settings, the output file must contain 1 line in
# addition to the headers :
# 1. The output after 'rate' iterations
self.assertEqual(output.get_column(0)[1], self.fdm.get_property_value("simulation/sim-time-sec"))
def test_moments_update(self):
script_path = self.sandbox.path_to_jsbsim_file('scripts', 'weather-balloon.xml')
self.fdm = CreateFDM(self.sandbox)
self.fdm.load_script(script_path)
self.fdm.set_output_directive(self.sandbox.path_to_jsbsim_file('tests', 'output.xml'))
self.fdm.run_ic()
self.CheckCGPosition()
dt = self.fdm.get_property_value('simulation/dt')
ExecuteUntil(self.fdm, 1.0-2.0*dt)
self.CheckCGPosition()
# Moves the radio sonde to modify the CG location
self.fdm.set_property_value('inertia/pointmass-location-X-inches', 5.0)
# Check that the moment is immediately updated accordingly
self.fdm.run()
self.CheckCGPosition()
Fbx = self.fdm.get_property_value('forces/fbx-buoyancy-lbs')
Fbz = self.fdm.get_property_value('forces/fbz-buoyancy-lbs')
CGx = self.fdm.get_property_value('inertia/cg-x-in') / 12.0 # Converts from in to ft
CGz = self.fdm.get_property_value('inertia/cg-z-in') / 12.0
Mby = self.fdm.get_property_value('moments/m-buoyancy-lbsft')
self.assertAlmostEqual(Fbx * CGz - Fbz * CGx, Mby, delta=1E-7,
msg="Fbx*CGz-Fbz*CGx = %f and Mby = %f do not match" % (Fbx*CGz-Fbz*CGx, Mby))
# One further step to log the same results in the output file
self.fdm.run()
self.CheckCGPosition()
csv = Table()
csv.ReadCSV(self.sandbox('output.csv'))
Mby = csv.get_column('M_{Buoyant} (ft-lbs)')[-1]
Fbx = csv.get_column('F_{Buoyant x} (lbs)')[-1]
Fbz = csv.get_column('F_{Buoyant z} (lbs)')[-1]
self.assertAlmostEqual(Fbx * CGz - Fbz * CGx, Mby, delta=1E-7,
msg="Fbx*CGz-Fbz*CGx = %f and Mby = %f do not match" % (Fbx*CGz-Fbz*CGx, Mby))
def test_gust_reset(self):
fdm = CreateFDM(self.sandbox)
fdm.load_script(self.sandbox.path_to_jsbsim_file('scripts', 'c172_cruise_8K.xml'))
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.set_output_directive(self.sandbox.path_to_jsbsim_file('tests', 'output.xml'))
fdm.run_ic()
ExecuteUntil(fdm, 15.5)
ref, current = Table(), Table()
ref.ReadCSV(self.sandbox('output.csv'))
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.reset_to_initial_conditions(1)
ExecuteUntil(fdm, 15.5)
current.ReadCSV(self.sandbox('output_0.csv'))
diff = ref.compare(current)
self.longMessage = True
self.assertTrue(diff.empty(), msg='\n'+repr(diff))
def test_gust_reset(self):
fdm = CreateFDM(self.sandbox)
fdm.load_script(
self.sandbox.path_to_jsbsim_file('scripts', 'c172_cruise_8K.xml'))
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.set_output_directive(
self.sandbox.path_to_jsbsim_file('tests', 'output.xml'))
fdm.run_ic()
ExecuteUntil(fdm, 15.5)
ref, current = Table(), Table()
ref.ReadCSV(self.sandbox('output.csv'))
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.reset_to_initial_conditions(1)
ExecuteUntil(fdm, 15.5)
current.ReadCSV(self.sandbox('output_0.csv'))
diff = ref.compare(current)
self.longMessage = True
self.assertTrue(diff.empty(), msg='\n' + repr(diff))
def testDebugLvl(self):
fdm = CreateFDM(self.sandbox)
fdm.load_script(self.sandbox.path_to_jsbsim_file('scripts', 'ball_orbit.xml'))
fdm.run_ic()
ExecuteUntil(fdm, 1000.)
ref, current = Table(), Table()
ref.ReadCSV(self.sandbox('BallOut.csv'))
del fdm
os.environ["JSBSIM_DEBUG"]=str(0)
fdm = CreateFDM(self.sandbox)
fdm.load_script(self.sandbox.path_to_jsbsim_file('scripts', 'ball_orbit.xml'))
fdm.run_ic()
ExecuteUntil(fdm, 1000.)
current.ReadCSV(self.sandbox('BallOut.csv'))
diff = ref.compare(current)
self.longMessage = True
self.assertTrue(diff.empty(), msg='\n'+repr(diff))
def BuildReference(self, script_name):
# Run the script
self.script = self.sandbox.path_to_jsbsim_file(
os.path.join('scripts', script_name))
self.sandbox.delete_csv_files()
fdm = CreateFDM(self.sandbox)
fdm.set_output_directive(
self.sandbox.path_to_jsbsim_file('tests', 'output.xml'))
fdm.load_script(self.script)
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.run_ic()
ExecuteUntil(fdm, 50.0)
self.ref = Table()
self.ref.ReadCSV(self.sandbox("output.csv"))
# Since the script will work with modified versions of the aircraft XML
# definition file, we need to make a copy of the directory that contains
# all the input data of that aircraft
tree, self.aircraft_name, self.path_to_jsbsim_aircrafts = CopyAircraftDef(
self.script, self.sandbox)
self.aircraft_path = self.sandbox('aircraft', self.aircraft_name)
def testDisablingOutputInScript(self):
property = et.SubElement(self.run_tag, "property")
property.text = "simulation/output/enabled"
property.attrib["value"] = "0.0"
self.tree.write(self.sandbox("c1722_0.xml"))
self.fdm.load_script("c1722_0.xml")
# Check that the output is disabled
self.assertEqual(self.fdm.get_property_value("simulation/output/enabled"), 0.0)
self.fdm.run_ic()
self.fdm.set_property_value("simulation/output/enabled", 1.0)
for i in xrange(self.rate):
self.fdm.run()
output = Table()
output.ReadCSV(self.output_file)
# According to the settings, the output file must contain 1 line in
# addition to the headers :
# 1. The output after 'rate' iterations
self.assertEqual(output.get_column(0)[1], self.fdm.get_property_value("simulation/sim-time-sec"))
def BuildReference(self, script_name):
# Run the script
self.script = self.sandbox.path_to_jsbsim_file(os.path.join('scripts',
script_name))
self.sandbox.delete_csv_files()
fdm = CreateFDM(self.sandbox)
fdm.set_output_directive(self.sandbox.path_to_jsbsim_file('tests',
'output.xml'))
fdm.load_script(self.script)
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.run_ic()
ExecuteUntil(fdm, 50.0)
self.ref = Table()
self.ref.ReadCSV(self.sandbox("output.csv"))
# Since the script will work with modified versions of the aircraft XML
# definition file, we need to make a copy of the directory that contains
# all the input data of that aircraft
tree, self.aircraft_name, self.path_to_jsbsim_aircrafts = CopyAircraftDef(self.script, self.sandbox)
self.aircraft_path = self.sandbox('aircraft', self.aircraft_name)
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, see <http://www.gnu.org/licenses/>
#
import sys
from JSBSim_utils import CreateFDM, Table, SandBox
sandbox = SandBox("check_cases", "orbit")
fdm = CreateFDM(sandbox)
fdm.load_script(sandbox.path_to_jsbsim_file("scripts", "ball_orbit.xml"))
fdm.run_ic()
while fdm.run():
pass
ref, current = Table(), Table()
ref.ReadCSV(sandbox.elude(sandbox.path_to_jsbsim_file("logged_data", "BallOut.csv")))
current.ReadCSV(sandbox("BallOut.csv"))
diff = ref.compare(current)
if not diff.empty():
print diff
sys.exit(-1) # Needed for 'make test' to report the test passed.
sandbox.erase()
class TestModelLoading(unittest.TestCase):
def setUp(self):
self.sandbox = SandBox()
def tearDown(self):
self.sandbox.erase()
def BuildReference(self, script_name):
# Run the script
self.script = self.sandbox.path_to_jsbsim_file(
os.path.join('scripts', script_name))
self.sandbox.delete_csv_files()
fdm = CreateFDM(self.sandbox)
fdm.set_output_directive(
self.sandbox.path_to_jsbsim_file('tests', 'output.xml'))
fdm.load_script(self.script)
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.run_ic()
ExecuteUntil(fdm, 50.0)
self.ref = Table()
self.ref.ReadCSV(self.sandbox("output.csv"))
# Since the script will work with modified versions of the aircraft XML
# definition file, we need to make a copy of the directory that contains
# all the input data of that aircraft
tree, self.aircraft_name, self.path_to_jsbsim_aircrafts = CopyAircraftDef(
self.script, self.sandbox)
self.aircraft_path = self.sandbox('aircraft', self.aircraft_name)
def ProcessAndCompare(self, section):
# Here we determine if the original aircraft definition <section> is
# inline or read from an external file.
tree = et.parse(
os.path.join(self.path_to_jsbsim_aircrafts,
self.aircraft_name + '.xml'))
root = tree.getroot()
# Iterate over all the tags named <section>
for section_element in root.findall(section):
if 'file' in section_element.keys():
self.InsertAndCompare(section_element, tree)
else:
self.DetachAndCompare(section_element, tree)
def DetachAndCompare(self, section_element, tree):
# Extract <section> from the original aircraft definition file and copy
# it in a separate XML file 'section.xml'
section_tree = et.ElementTree(element=section_element)
if 'name' in section_element.keys():
section = section_element.attrib['name']
else:
section = section_element.tag
section_tree.write(os.path.join(self.aircraft_path, section + '.xml'),
xml_declaration=True)
# Now, we need to clean up the aircraft definition file from all
# references to <section>. We just need a single <section> tag that
# points to the file 'section.xml'
for element in list(section_element):
section_element.remove(element)
section_element.attrib = {'file': section + '.xml'}
tree.write(os.path.join(self.aircraft_path,
self.aircraft_name + '.xml'),
xml_declaration=True)
self.Compare(section)
def InsertAndCompare(self, section_element, tree):
file_name = append_xml(section_element.attrib['file'])
section_file = os.path.join(self.path_to_jsbsim_aircrafts, file_name)
# If <section> is actually <system>, we need to iterate over all the
# directories in which the file is allowed to be stored until the file
# is located.
if not os.path.exists(
section_file) and section_element.tag == 'system':
section_file = os.path.join(self.path_to_jsbsim_aircrafts,
"systems", file_name)
if not os.path.exists(section_file):
section_file = self.sandbox.elude(
self.sandbox.path_to_jsbsim_file("systems", file_name))
# The original <section> tag is dropped and replaced by the content of
# the file.
section_root = et.parse(section_file).getroot()
del section_element.attrib['file']
section_element.attrib.update(section_root.attrib)
section_element.extend(section_root)
tree.write(
os.path.join(self.aircraft_path, self.aircraft_name + '.xml'))
self.Compare(section_element.tag + " file:" + section_file)
def Compare(self, section):
# Rerun the script with the modified aircraft definition
self.sandbox.delete_csv_files()
fdm = CreateFDM(self.sandbox)
# We need to tell JSBSim that the aircraft definition is located in the
# directory build/.../aircraft
fdm.set_aircraft_path('aircraft')
fdm.set_output_directive(
self.sandbox.path_to_jsbsim_file('tests', 'output.xml'))
fdm.load_script(self.script)
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.run_ic()
ExecuteUntil(fdm, 50.0)
mod = Table()
mod.ReadCSV(self.sandbox('output.csv'))
# Whether the data is read from the aircraft definition file or from an
# external file, the results shall be exactly identical. Hence the
# precision set to 0.0.
diff = self.ref.compare(mod, 0.0)
self.assertTrue(diff.empty(),
msg='\nTesting section "' + section + '"\n' +
repr(diff))
def test_model_loading(self):
self.longMessage = True
self.BuildReference('c1724.xml')
output_ref = Table()
output_ref.ReadCSV(self.sandbox('JSBout172B.csv'))
self.ProcessAndCompare('aerodynamics')
self.ProcessAndCompare('autopilot')
self.ProcessAndCompare('flight_control')
self.ProcessAndCompare('ground_reactions')
self.ProcessAndCompare('mass_balance')
self.ProcessAndCompare('metrics')
self.ProcessAndCompare('propulsion')
self.ProcessAndCompare('system')
# The <output> section needs special handling. In addition to the check
# conducted by ProcessAndCompare with a directive file, we need to
# verify that the <output> tag has been correctly executed by JSBSim.
# In the case of the script c1724.xml, this means that the data output
# in JSBout172B.csv is the same between the reference 'output_ref' and
# the result 'mod' below where the <output> tag was moved in a separate
# file.
self.ProcessAndCompare('output')
mod = Table()
mod.ReadCSV(self.sandbox('JSBout172B.csv'))
diff = output_ref.compare(mod, 0.0)
self.assertTrue(diff.empty(),
msg='\nTesting section "output"\n' + repr(diff))
self.BuildReference('weather-balloon.xml')
self.ProcessAndCompare('buoyant_forces')
self.BuildReference('Concorde_runway_test.xml')
self.ProcessAndCompare('external_reactions')
class TestModelLoading(unittest.TestCase):
def setUp(self):
self.sandbox = SandBox()
def tearDown(self):
self.sandbox.erase()
def BuildReference(self, script_name):
# Run the script
self.script = self.sandbox.path_to_jsbsim_file(os.path.join('scripts',
script_name))
self.sandbox.delete_csv_files()
fdm = CreateFDM(self.sandbox)
fdm.set_output_directive(self.sandbox.path_to_jsbsim_file('tests',
'output.xml'))
fdm.load_script(self.script)
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.run_ic()
ExecuteUntil(fdm, 50.0)
self.ref = Table()
self.ref.ReadCSV(self.sandbox("output.csv"))
# Since the script will work with modified versions of the aircraft XML
# definition file, we need to make a copy of the directory that contains
# all the input data of that aircraft
tree, self.aircraft_name, self.path_to_jsbsim_aircrafts = CopyAircraftDef(self.script, self.sandbox)
self.aircraft_path = self.sandbox('aircraft', self.aircraft_name)
def ProcessAndCompare(self, section):
# Here we determine if the original aircraft definition <section> is
# inline or read from an external file.
tree = et.parse(os.path.join(self.path_to_jsbsim_aircrafts,
self.aircraft_name + '.xml'))
root = tree.getroot()
# Iterate over all the tags named <section>
for section_element in root.findall(section):
if 'file' in section_element.keys():
self.InsertAndCompare(section_element, tree)
else:
self.DetachAndCompare(section_element, tree)
def DetachAndCompare(self, section_element, tree):
# Extract <section> from the original aircraft definition file and copy
# it in a separate XML file 'section.xml'
section_tree = et.ElementTree(element=section_element)
if 'name' in section_element.keys():
section = section_element.attrib['name']
else:
section = section_element.tag
section_tree.write(os.path.join(self.aircraft_path, section+'.xml'),
xml_declaration=True)
# Now, we need to clean up the aircraft definition file from all
# references to <section>. We just need a single <section> tag that
# points to the file 'section.xml'
for element in list(section_element):
section_element.remove(element)
section_element.attrib = {'file': section+'.xml'}
tree.write(os.path.join(self.aircraft_path, self.aircraft_name+'.xml'),
xml_declaration=True)
self.Compare(section)
def InsertAndCompare(self, section_element, tree):
file_name = append_xml(section_element.attrib['file'])
section_file = os.path.join(self.path_to_jsbsim_aircrafts, file_name)
# If <section> is actually <system>, we need to iterate over all the
# directories in which the file is allowed to be stored until the file
# is located.
if not os.path.exists(section_file) and section_element.tag == 'system':
section_file = os.path.join(self.path_to_jsbsim_aircrafts, "systems", file_name)
if not os.path.exists(section_file):
section_file = self.sandbox.elude(self.sandbox.path_to_jsbsim_file("systems", file_name))
# The original <section> tag is dropped and replaced by the content of
# the file.
section_root = et.parse(section_file).getroot()
del section_element.attrib['file']
section_element.attrib.update(section_root.attrib)
section_element.extend(section_root)
tree.write(os.path.join(self.aircraft_path, self.aircraft_name+'.xml'))
self.Compare(section_element.tag+" file:"+section_file)
def Compare(self, section):
# Rerun the script with the modified aircraft definition
self.sandbox.delete_csv_files()
fdm = CreateFDM(self.sandbox)
# We need to tell JSBSim that the aircraft definition is located in the
# directory build/.../aircraft
fdm.set_aircraft_path('aircraft')
fdm.set_output_directive(self.sandbox.path_to_jsbsim_file('tests', 'output.xml'))
fdm.load_script(self.script)
fdm.set_property_value('simulation/randomseed', 0.0)
fdm.run_ic()
ExecuteUntil(fdm, 50.0)
mod = Table()
mod.ReadCSV(self.sandbox('output.csv'))
# Whether the data is read from the aircraft definition file or from an
# external file, the results shall be exactly identical. Hence the
# precision set to 0.0.
diff = self.ref.compare(mod, 0.0)
self.assertTrue(diff.empty(),
msg='\nTesting section "'+section+'"\n'+repr(diff))
def test_model_loading(self):
self.longMessage = True
self.BuildReference('c1724.xml')
output_ref = Table()
output_ref.ReadCSV(self.sandbox('JSBout172B.csv'))
self.ProcessAndCompare('aerodynamics')
self.ProcessAndCompare('autopilot')
self.ProcessAndCompare('flight_control')
self.ProcessAndCompare('ground_reactions')
self.ProcessAndCompare('mass_balance')
self.ProcessAndCompare('metrics')
self.ProcessAndCompare('propulsion')
self.ProcessAndCompare('system')
# The <output> section needs special handling. In addition to the check
# conducted by ProcessAndCompare with a directive file, we need to
# verify that the <output> tag has been correctly executed by JSBSim.
# In the case of the script c1724.xml, this means that the data output
# in JSBout172B.csv is the same between the reference 'output_ref' and
# the result 'mod' below where the <output> tag was moved in a separate
# file.
self.ProcessAndCompare('output')
mod = Table()
mod.ReadCSV(self.sandbox('JSBout172B.csv'))
diff = output_ref.compare(mod, 0.0)
self.assertTrue(diff.empty(),
msg='\nTesting section "output"\n'+repr(diff))
self.BuildReference('weather-balloon.xml')
self.ProcessAndCompare('buoyant_forces')
self.BuildReference('Concorde_runway_test.xml')
self.ProcessAndCompare('external_reactions')
def test_point_mass_inertia(self):
script_path = self.sandbox.path_to_jsbsim_file('scripts', 'J2460.xml')
fdm = CreateFDM(self.sandbox)
fdm.set_output_directive(self.sandbox.path_to_jsbsim_file('tests',
'output.xml'))
fdm.load_script(script_path)
fdm.run_ic()
ExecuteUntil(fdm, 50.0)
ref = Table()
ref.ReadCSV(self.sandbox("output.csv"))
tree, aircraft_name, path_to_jsbsim_aircrafts = CopyAircraftDef(script_path, self.sandbox)
pointmass_element = tree.getroot().find('mass_balance/pointmass//form/..')
weight_element = pointmass_element.find('weight')
weight = float(weight_element.text)
form_element = pointmass_element.find('form')
radius_element = form_element.find('radius')
radius, length = (0.0, 0.0)
if radius_element is not None:
radius = float(radius_element.text)
length_element = form_element.find('length')
if length_element is not None:
length = float(length_element.text)
shape = form_element.attrib['shape']
pointmass_element.remove(form_element)
inertia = numpy.zeros((3,3))
if string.strip(shape) == 'tube':
inertia[0,0] = radius * radius
inertia[1,1] = (6.0 * inertia[0,0] + length * length) / 12.0
inertia[2,2] = inertia[1,1]
inertia = inertia * weight / 32.174049 # conversion between slug and lb
ixx_element = et.SubElement(pointmass_element, 'ixx')
ixx_element.text = str(inertia[0,0])
iyy_element = et.SubElement(pointmass_element, 'iyy')
iyy_element.text = str(inertia[1,1])
izz_element = et.SubElement(pointmass_element, 'izz')
izz_element.text = str(inertia[2,2])
tree.write(self.sandbox('aircraft', aircraft_name, aircraft_name+'.xml'))
fdm = CreateFDM(self.sandbox)
fdm.set_aircraft_path('aircraft')
fdm.set_output_directive(self.sandbox.path_to_jsbsim_file('tests',
'output.xml'))
fdm.load_script(script_path)
fdm.run_ic()
ExecuteUntil(fdm, 50.0)
mod = Table()
mod.ReadCSV(self.sandbox("output.csv"))
diff = ref.compare(mod)
self.assertTrue(diff.empty(),
msg='\n'+repr(diff))
def test_IC_override(self):
# Run the script c1724.xml
script_path = self.sandbox.path_to_jsbsim_file('scripts', 'c1724.xml')
fdm = CreateFDM(self.sandbox)
fdm.load_script(script_path)
vt0 = fdm.get_property_value('ic/vt-kts')
fdm.run_ic()
self.assertEqual(fdm.get_property_value('simulation/sim-time-sec'), 0.0)
self.assertAlmostEqual(fdm.get_property_value('velocities/vt-fps'),
vt0 / fpstokts, delta=1E-7)
ExecuteUntil(fdm, 1.0)
# Check that the total velocity exported in the output file matches the
# IC defined in the initialization file
ref = Table()
ref.ReadCSV(self.sandbox('JSBout172B.csv'))
self.assertEqual(ref.get_column('Time')[1], 0.0)
self.assertAlmostEqual(ref.get_column('V_{Total} (ft/s)')[1],
vt0 / fpstokts, delta=1E-7)
# Now, we will re-run the same test but the IC will be overridden in the
# script. The initial total velocity is increased by 1 ft/s
vt0 += 1.0
# The script c1724.xml is loaded and the following line is added in it:
# <property value="..."> ic/vt-kts </property>
# The modified script is then saved with the named 'c1724_0.xml'
tree = et.parse(self.sandbox.elude(script_path))
run_tag = tree.getroot().find("./run")
property = et.SubElement(run_tag, 'property')
property.text = 'ic/vt-kts'
property.attrib['value'] = str(vt0)
tree.write(self.sandbox('c1724_0.xml'))
# Re-run the same check than above. This time we are making sure than
# the total initial velocity is increased by 1 ft/s
self.sandbox.delete_csv_files()
# Because JSBSim internals use static pointers, we cannot rely on Python
# garbage collector to decide when the FDM is destroyed otherwise we can
# get dangling pointers.
del fdm
fdm = CreateFDM(self.sandbox)
fdm.load_script('c1724_0.xml')
self.assertAlmostEqual(fdm.get_property_value('ic/vt-kts'), vt0,
delta=1E-6)
fdm.run_ic()
self.assertEqual(fdm.get_property_value('simulation/sim-time-sec'), 0.0)
self.assertAlmostEqual(fdm.get_property_value('velocities/vt-fps'),
vt0 / fpstokts, delta=1E-6)
ExecuteUntil(fdm, 1.0)
mod = Table()
mod.ReadCSV(self.sandbox('JSBout172B.csv'))
self.assertAlmostEqual(mod.get_column('V_{Total} (ft/s)')[1],
vt0 / fpstokts, delta=1E-6)
def test_IC_override(self):
# Run the script c1724.xml
script_path = self.sandbox.path_to_jsbsim_file('scripts', 'c1724.xml')
fdm = CreateFDM(self.sandbox)
fdm.load_script(script_path)
vt0 = fdm.get_property_value('ic/vt-kts')
fdm.run_ic()
ExecuteUntil(fdm, 1.0)
# Check that the total velocity exported in the output file matches the IC
# defined in the initialization file
ref = Table()
ref.ReadCSV(self.sandbox('JSBout172B.csv'))
for col, title in enumerate(ref._lines[0]):
if title == 'V_{Total} (ft/s)':
self.assertTrue(
abs(ref._lines[1][col] - (vt0 / fpstokts)) < 1E-5,
msg=
"Original script %s\nThe total velocity is %f. The value %f was expected"
% (script_path, ref._lines[1][col], vt0 / fpstokts))
break
else:
self.fail("The total velocity is not exported in %s" %
(script_path, ))
# Now, we will re-run the same test but the IC will be overridden in the scripts
# The initial total velocity is increased by 1 ft/s
vt0 += 1.0
# The script c1724.xml is loaded and the following line is added in it:
# <property value="..."> ic/vt-kts </property>
# The modified script is then saved with the named 'c1724_0.xml'
tree = et.parse(self.sandbox.elude(script_path))
run_tag = tree.getroot().find("./run")
property = et.SubElement(run_tag, 'property')
property.text = 'ic/vt-kts'
property.attrib['value'] = str(vt0)
tree.write(self.sandbox('c1724_0.xml'))
# Re-run the same check than above. This time we are making sure than the total
# initial velocity is increased by 1 ft/s
self.sandbox.delete_csv_files()
# Because JSBSim internals use static pointers, we cannot rely on Python
# garbage collector to decide when the FDM is destroyed otherwise we can
# get dangling pointers.
del fdm
fdm = CreateFDM(self.sandbox)
fdm.load_script('c1724_0.xml')
self.assertTrue(
abs(fdm.get_property_value('ic/vt-kts') - vt0) < 1E-5,
msg=
"Modified script %s\nThe total velocity in the IC (%f) is different from %f"
% (self.sandbox('JSBout172B.csv'),
fdm.get_property_value('ic/vt-kts'), vt0))
fdm.run_ic()
ExecuteUntil(fdm, 1.0)
mod = Table()
mod.ReadCSV(self.sandbox('JSBout172B.csv'))
for col, title in enumerate(mod._lines[0]):
if title == 'V_{Total} (ft/s)':
self.assertTrue(
abs(mod._lines[1][col] - (vt0 / fpstokts)) < 1E-5,
msg=
"Modified script %s\nThe total velocity is %f. The value %f was expected"
% (self.sandbox('JSBout172B.csv'), mod._lines[1][col],
vt0 / fpstokts))
break
else:
self.fail("The total velocity is not exported in %s" %
(sandbox('JSBout172B.csv'), ))
