def testMirror(self):
"""
perform a mirror operation of all the entity
"""
#Arc mirror
newDoc=self.__pyCadApplication.ActiveDocument
centerPoint=Point(100, 100)
arg={"ARC_0":centerPoint, "ARC_1":50, "ARC_2":0.78539816339500002,"ARC_3":1.5707963267948966}
arc=Arc(arg)
entArc=newDoc.saveEntity(arc)
sArg={"SEGMENT_0":Point(-100, 0), "SEGMENT_1":Point(0, 100)}
_s=Segment(sArg)
mirrorSeg=newDoc.saveEntity(_s)
arc.mirror(_s)
entArc=newDoc.saveEntity(arc)
#Point
centerPoint=Point(100, 0)
dbPointEnt=newDoc.saveEntity(centerPoint)
newcenterPoint=centerPoint.clone()
newcenterPoint.mirror(_s)
dbPointEnt=newDoc.saveEntity(newcenterPoint)
#Segment
sArg={"SEGMENT_0":Point(100, 100), "SEGMENT_1":Point(150, 150)}
_st=Segment(sArg)
newSeg=newDoc.saveEntity(_st)
_st.mirror(_s)
newDoc.saveEntity(_st)
#Ellipse
eArg={"ELLIPSE_0":Point(100, 0), "ELLIPSE_1":100, "ELLIPSE_2":50}
_e=Ellipse(eArg)
newE=newDoc.saveEntity(_e)
_e.mirror(_s)
newDoc.saveEntity(_e)
def _adjust_endpoint(arc, pt, objdict, cx, cy, ra):
_layer = arc.getParent()
if pt.getParent() is not _layer:
raise RuntimeError, "Arc/Endpoint parent object conflict!"
_pid = id(pt)
_users = []
for _user in pt.getUsers():
_users.append(_user)
_np = None
_x, _y = _calc_coords(pt, cx, cy, ra)
if len(_users) == 1 and _users[0] is arc:
if _can_move(pt, objdict) and objdict.get(_pid) is not False:
pt.setCoords(_x, _y)
else:
_pts = _layer.find('point', _x, _y)
if len(_pts) == 0:
_np = Point(_x, _y)
_layer.addObject(_np)
else:
_np = _most_used(_pts)
else:
pt.freeUser(arc)
_pts = _layer.find('point', _x, _y)
if len(_pts) == 0:
_np = Point(_x, _y)
_layer.addObject(_np)
else:
_np = _most_used(_pts)
if _np is not None:
_np.storeUser(arc)
if _adjust_dimensions(pt, _np):
_layer.delObject(pt)
if objdict.get(_pid) is not False:
objdict[_pid] = False
def testMove(self):
"""
perform a move operation
"""
#Arc
newDoc=self.__pyCadApplication.ActiveDocument
centerPoint=Point(100, 100)
arg={"ARC_0":centerPoint, "ARC_1":50, "ARC_2":0.78539816339500002,"ARC_3":1.5707963267948966}
arc=Arc(arg)
entArc=newDoc.saveEntity(arc)
sp=Point(0, 0)
ep=Point(100, 100)
arc.move(sp, ep)
entArc=newDoc.saveEntity(arc)
#Point
centerPoint=Point(100, 0)
dbPointEnt=newDoc.saveEntity(centerPoint)
centerPoint.move(sp, ep)
dbPointEnt=newDoc.saveEntity(centerPoint)
#Segment
sArg={"SEGMENT_0":Point(100, 100), "SEGMENT_1":Point(150, 150)}
_st=Segment(sArg)
newSeg=newDoc.saveEntity(_st)
_st.move(sp, ep)
newDoc.saveEntity(_st)
#Ellipse
eArg={"ELLIPSE_0":Point(100, 0), "ELLIPSE_1":100, "ELLIPSE_2":50}
_e=Ellipse(eArg)
newE=newDoc.saveEntity(_e)
_e.move(sp, ep)
newDoc.saveEntity(_e)
def getEntityEntity(sympyEntity):
"""
convert sympy object into PyCAD object
"""
if isinstance(sympyEntity, geoSympy.Circle):
arg={"ARC_0":Point(0.0, 0.0),
"ARC_1":1,
"ARC_2":None,
"ARC_3":None
}
arc=Arc(arg)
arc.setFromSympy(sympyEntity)
return arc
elif isinstance(sympyEntity, geoSympy.Point):
p=Point(0.0, 0.0)
p.setFromSympy(sympyEntity)
return p
elif isinstance(sympyEntity, geoSympy.Segment):
segArg={"SEGMENT_0":Point(0.0, 0.0), "SEGMENT_1":Point(1.0, 1.0)}
seg=Segment(segArg)
seg.setFromSympy(sympyEntity)
return seg
elif isinstance(sympyEntity, geoSympy.Ellipse):
arg={"ELLIPSE_0":Point(0.0, 0.0), "ELLIPSE_1":1.0, "ELLIPSE_2":2.0}
e=Ellipse(arg)
e.setFromSympy(sympyEntity)
return e
else:
raise "not supported entity"
def getIntersection(self, entity, point):
"""
this function compute the snap intersection point
"""
returnVal=None
distance=None
if entity!=None:
geoEntityFrom=entity.geoItem
entityList=self._scene.collidingItems(entity)
for ent in entityList:
if not isinstance(ent,BaseEntity):
continue
if isinstance(ent, BaseEntity):
intPoint=find_intersections(ent.geoItem,geoEntityFrom)
for tp in intPoint:
iPoint=Point(tp[0], tp[1])
if distance==None:
distance=iPoint.dist(point)
returnVal=iPoint
else:
spoolDist=iPoint.dist(point)
if distance>spoolDist:
distance=spoolDist
returnVal=iPoint
return returnVal
def GetRadiusPointFromExt(self,x,y):
"""
get The intersecrion point from the line(x,y,cx,cy) and the circle
"""
_cx, _cy = self.center.getCoords()
_r = self.radius
centerPoint=Point(_cx,_cy)
outPoint=Point(x,y)
vector=Vector(outPoint,centerPoint)
vNorm=vector.norm()
newNorm=abs(vNorm-_r)
magVector=vector.mag()
magVector.mult(newNorm)
newPoint=magVector.point()
intPoint=Point(outPoint+newPoint)
return intPoint.getCoords()
def GetTangentPoint(self,x,y,outx,outy):
"""
Get the tangent from an axternal point
args:
x,y is a point near the circle
xout,yout is a point far from the circle
return:
a tuple(x,y,x1,xy) that define the tangent line
"""
firstPoint=Point(x,y)
fromPoint=Point(outx,outy)
twoPointDistance=self.center.Dist(fromPoint)
if(twoPointDistance<self.radius):
return None,None
originPoint=Point(0.0,0.0)
tanMod=math.sqrt(pow(twoPointDistance,2)-pow(self.radius,2))
tgAngle=math.asin(self.radius/twoPointDistance)
#Compute the x versor
xPoint=point.Point(1.0,0.0)
xVector=Vector(originPoint,xPoint)
twoPointVector=Vector(fromPoint,self.center)
rightAngle=twoPointVector.Ang(xVector)
cx,cy=self.center.getCoords()
if(outy>cy): #stupid situation
rightAngle=-rightAngle
posAngle=rightAngle+tgAngle
negAngle=rightAngle-tgAngle
#Compute the Positive Tangent
xCord=math.cos(posAngle)
yCord=math.sin(posAngle)
dirPoint=Point(xCord,yCord)#Versor that point at the tangentPoint
ver=Vector(originPoint,dirPoint)
ver.Mult(tanMod)
tangVectorPoint=ver.Point()
posPoint=Point(tangVectorPoint+(outx,outy))
#Compute the Negative Tangent
xCord=math.cos(negAngle)
yCord=math.sin(negAngle)
dirPoint=Point(xCord,yCord)#Versor that point at the tangentPoint
ver=Vector(originPoint,dirPoint)
ver.Mult(tanMod)
tangVectorPoint=ver.Point()
negPoint=Point(tangVectorPoint+(outx,outy))
if firstPoint.Dist(posPoint)<firstPoint.Dist(negPoint):
return posPoint.getCoords()
else:
return negPoint.getCoords()
def testChamferCommand(self):
"""
this function is usefoul for short test
as soon it works copy the code into featureTest
"""
newDoc = self.__pyCadApplication.newDocument()
intPoint = Point(0.0, 0.0)
s1 = Segment(intPoint, Point(10.0, 0.0))
s2 = Segment(intPoint, Point(0.0, 10.0))
ent1 = newDoc.saveEntity(s1)
ent2 = newDoc.saveEntity(s2)
cObject = self.__pyCadApplication.getCommand("CHAMFER")
keys = list(cObject.keys())
cObject[keys[0]] = ent1
cObject[keys[1]] = ent2
cObject[keys[2]] = 2
cObject[keys[3]] = 2
cObject[keys[4]] = None
cObject[keys[5]] = None
cObject.applyCommand()
def MassiveDelete(self):
try:
import time
startTime = time.clock()
newDoc = self.__pyCadApplication.ActiveDocument
newDoc.startMassiveCreation()
for i in range(1000):
intPoint = Point(i, i)
args = {"SEGMENT_0": intPoint, "SEGMENT_1": Point(10.0, 0.0)}
s1 = Segment(args)
newDoc.saveEntity(s1)
else:
newDoc.performCommit()
newDoc.stopMassiveCreation()
endTime = time.clock() - startTime
print("Create 1000 entity in %s" % str(endTime))
finally:
ents = newDoc.getAllDrawingEntity()
ids = [ent.getId() for ent in ents]
startTime = time.clock()
newDoc.massiveDelete(ids)
endTime = time.clock() - startTime
print("Delete 1000 entity in %s" % str(endTime))
def createArc(self, x, y, r, color=None, sa=None, ea=None):
"""
Create a Arc entitys into the current drawing
"""
_center = Point(x, y)
if sa is None or ea is None:
sa = ea = 0 #This is the case of circle
else:
sa = (sa * math.pi) / 180
ea = (ea * math.pi) / 180
ea = ea - sa
args = {"ARC_0": _center, "ARC_1": r, "ARC_2": sa, "ARC_3": ea}
_arc = Arc(args)
self.__kernel.saveEntity(_arc)
def createPolyline(self, points, c):
"""
Crate poliline into Pythoncad
"""
pass #TODO: must be implemented
dPrint("Exec createPolyline")
i = 0
args = {}
for _x, _y in points:
_p = Point(_x, _y)
args["POLYLINE_%s" % str(i, 'ASCII')] = _p
i += 1
pline = Polyline(args)
self.__kernel.saveEntity(pline)
def _xfrm_point(pt, objdict, cx, cy, ra):
_layer = pt.getParent()
_pid = id(pt)
_np = None
_x, _y = _calc_coords(pt, cx, cy, ra)
if _can_move(pt, objdict) and objdict.get(_pid) is not False:
pt.setCoords(_x, _y)
else:
_pts = _layer.find('point', _x, _y)
if len(_pts) == 0:
_np = Point(_x, _y)
_layer.addObject(_np)
else:
_np = _most_used(_pts)
return _np
def createText(self, x, y, h, t):
"""
Create a Text entitys into the current drawing
"""
try:
_text = t.replace('\x00', '').decode('utf8',
'ignore').encode('utf8')
except:
self.writeError("createText",
"Debug Error Converting in unicode [%s]" % t)
_text = 'Unable to convert in unicode'
_p = Point(x, y)
args = {"TEXT_0": _p, "TEXT_1": _text, "TEXT_2": 0.0, "TEXT_3": ""}
_tb = Text(args)
self.__kernel.saveEntity(_tb)
def toGeometricalEntity(self):
"""
Convert an entity into a geometrical entity
"""
from Kernel.initsetting import DRAWIN_ENTITY
geoEnt = None
cObjecs = self.getConstructionElements()
cType = self.getEntityType()
for key in DRAWIN_ENTITY:
if DRAWIN_ENTITY[key] == cType:
if cType == "POINT":
geoEnt = Point(cObjecs["POINT_0"], cObjecs["POINT_1"])
else:
geoEnt = key(cObjecs)
break
return geoEnt
def testFillet2(self):
newDoc = self.__pyCadApplication.ActiveDocument
intPoint = Point(0, 0)
args = {"SEGMENT_0": intPoint, "SEGMENT_1": Point(1000, 1000)}
s1 = Segment(args)
args = {"SEGMENT_0": intPoint, "SEGMENT_1": Point(1000, 0)}
s2 = Segment(args)
ent1 = newDoc.saveEntity(s1)
ent2 = newDoc.saveEntity(s2)
cObject = self.__pyCadApplication.getCommand("FILLET")
keys = list(cObject.keys())
cObject[keys[0]] = ent1
cObject[keys[1]] = ent2
cObject[keys[2]] = Point(101, 0)
cObject[keys[3]] = Point(0, 103)
cObject[keys[4]] = "NO_TRIM"
cObject[keys[5]] = 20
cObject.applyCommand()
cObject = self.__pyCadApplication.getCommand("FILLET")
keys = list(cObject.keys())
cObject[keys[0]] = ent1
cObject[keys[1]] = ent2
cObject[keys[2]] = Point(101, 0)
cObject[keys[3]] = Point(0, 103)
cObject[keys[4]] = "NO_TRIM"
cObject[keys[5]] = 100
cObject.applyCommand()
cObject = self.__pyCadApplication.getCommand("BISECTOR")
keys = list(cObject.keys())
cObject[keys[0]] = ent1
cObject[keys[1]] = ent2
cObject[keys[2]] = Point(101, 0)
cObject[keys[3]] = Point(0, 103)
cObject[keys[4]] = 1000
cObject.applyCommand()
def correctPositionForcedDirection(self, point, force):
"""
correct the point cords
"""
if point == None or force == None:
return None
x, y = point.getCoords()
lastSnap = None
lastSnap = self.getActiveSnapClick()
if force and lastSnap != None:
if abs(x - lastSnap.x) > abs(y - lastSnap.y):
y = lastSnap.y
else:
x = lastSnap.x
#elif self.forceDirection.find("F")>=0:
# angle=convertAngle(self.forceDirection.split("F")[1])
# if angle:
# x=self.lastSnap.x+x
# y=self.lastSnap.y+math.cos(angle)*x
return Point(x, y)
def getMiddlePoint(self):
"""
Return the middle point of the segment
"""
_p1, _p2 = self.getEndpoints()
_x1 = get_float(_p1.x)
_x2 = get_float(_p2.x)
_y1 = get_float(_p1.y)
_y2 = get_float(_p2.y)
_deltax = abs(_x1 - _x2) / 2.0
_deltay = abs(_y1 - _y2) / 2.0
if (_x1 < _x2):
retX = _x1 + _deltax
else:
retX = _x2 + _deltax
if (_y1 < _y2):
retY = _y1 + _deltay
else:
retY = _y2 + _deltay
return Point(retX, retY)
def mouseMoveEvent(self, event):
scenePos = event.scenePos()
mouseOnSceneX = scenePos.x()
mouseOnSceneY = scenePos.y() * -1.0
self.geoMousePointOnScene = Point(mouseOnSceneX, mouseOnSceneY)
#
# This event manages middle mouse button PAN
#
if self.isInPan:
self.firePan(None, event.scenePos())
#
#This event manages the status bar coordinates display (relative or absolute depending on self.fromPoint)
#
else:
if self.fromPoint == None:
self.fireCoords(mouseOnSceneX, mouseOnSceneY, "abs")
else:
x = mouseOnSceneX - self.fromPoint.getx()
y = mouseOnSceneY - self.fromPoint.gety()
self.fireCoords(x, y, "rel")
#
#This seems needed to preview commands
#
ps = self.geoMousePointOnScene
if self.activeICommand:
#SNAP PREVIEW
if self.activeKernelCommand.activeException(
) == ExcPoint or self.activeKernelCommand.activeException(
) == ExcLenght:
item = self.activeICommand.getEntity(ps)
if item:
ps = self.snappingPoint.getSnapPoint(
self.geoMousePointOnScene, item)
if ps != self.geoMousePointOnScene:
self.endMark.move(ps.getx(), ps.gety() * -1.0)
else:
self.hideSnapMarks()
qtItem = [self.itemAt(scenePos)]
self.activeICommand.updateMauseEvent(ps, qtItem)
super(CadScene, self).mouseMoveEvent(event)
return
def mouseReleaseEvent(self, event):
if event.button() == QtCore.Qt.MidButton:
self.isInPan = False
self.firePan(False, None)
if not self.isInPan:
self.updateSelected()
qtItems = [item for item in self.selectedItems() if isinstance(item, BaseEntity)]
if self.activeICommand:
if event.button() == QtCore.Qt.RightButton:
try:
self.activeICommand.applyCommand()
except PyCadWrongImputData:
self.fireWarning("Wrong input value")
super(CadScene, self).mouseReleaseEvent(event)
return
if event.button() == QtCore.Qt.LeftButton:
point = None
if self.showHandler:
if self.posHandler == None:
self.posHandler = PositionHandler(event.scenePos())
self.addItem(self.posHandler)
return
else:
self.posHandler.show()
return
if point == None:
point = Point(event.scenePos().x(), event.scenePos().y() * -1.0)
# fire the mouse to the ICommand class
self.activeICommand.addMauseEvent(point=point, entity=qtItems, force=self.forceDirection)
else:
self.hideHandler()
if self._cmdZoomWindow:
self.zoomWindows(self.selectionArea().boundingRect())
self._cmdZoomWindow = None
self.clearSelection() # clear the selection after the window zoom, why? because zoom windows select entities_>that's bad
super(CadScene, self).mouseReleaseEvent(event)
return
def mouseMoveEvent(self, event):
scenePos = event.scenePos()
self.mouseOnSceneX = scenePos.x()
self.mouseOnSceneY = scenePos.y() * -1.0
#
#This event manages middle mouse button PAN
#
if self.isInPan:
self.firePan(None, event.scenePos())
#
#This event manages the status bar coordinates display (relative or absolute depending on self.fromPoint)
#
else:
if self.fromPoint == None:
self.fireCoords(scenePos.x(), (scenePos.y() * -1.0), "abs")
else:
x = scenePos.x() - self.fromPoint.getx()
y = scenePos.y() * -1.0 - self.fromPoint.gety()
self.fireCoords(x, y, "rel")
#
#This seems needed to preview commands
#
if self.activeICommand:
# scenePos = event.scenePos()
distance = None
point = Point(scenePos.x(), scenePos.y() * -1.0)
qtItem = [self.itemAt(scenePos, QtGui.QTransform())]
if self.__oldClickPoint:
distance = self.getDistance(event)
self.activeICommand.updateMauseEvent(point, distance, qtItem)
# self.updatePreview(self,point, distance)
#
# path=QtGui.QPainterPath()
# path.addRect(scenePos.x()-self.__grapWithd/2, scenePos.y()+self.__grapWithd/2, self.__grapWithd, self.__grapWithd)
# self.setSelectionArea(path)
#
super(CadScene, self).mouseMoveEvent(event)
return
def nearestSnapPoint(self,
qtPointEvent,
snapForceType=None,
fromEntity=None):
"""
compute the nearest point and return a qtPoint
"""
pClick = Point(qtPointEvent.x(), qtPointEvent.y() * -1.0)
ePoint = None
for p in self.geoItem.getUpdatedSnapPoints(snapForceType, pClick,
fromEntity):
distance = p.dist(pClick)
if ePoint == None:
oldDistance = distance
ePoint = p
else:
if oldDistance > distance:
oldDistance = distance
ePoint = p
if ePoint == None:
return qtPointEvent
return QtCore.QPointF(ePoint.x, ePoint.y * -1.0)
def trim(self):
"""
test the trim command
"""
newDoc = self.__pyCadApplication.ActiveDocument
sArg1 = {"SEGMENT_0": Point(0, 0), "SEGMENT_1": Point(150, 0)}
_st1 = Segment(sArg1)
newSeg1 = newDoc.saveEntity(_st1)
sArg2 = {"SEGMENT_0": Point(200, 0), "SEGMENT_1": Point(200, 150)}
_st2 = Segment(sArg2)
newSeg2 = newDoc.saveEntity(_st2)
trimCmd = self.__pyCadApplication.getCommand('TRIM')
keys = list(trimCmd.keys())
trimCmd[keys[0]] = newSeg1.getId()
trimCmd[keys[1]] = newSeg2.getId()
trimCmd[keys[2]] = Point(140, 1)
trimCmd[keys[3]] = Point(210, 1)
trimCmd[keys[4]] = "B"
trimCmd.applyCommand()
def testMove(self):
"""
perform a move operation
"""
#Arc
newDoc = self.__pyCadApplication.ActiveDocument
centerPoint = Point(100, 100)
arg = {
"ARC_0": centerPoint,
"ARC_1": 50,
"ARC_2": 0.78539816339500002,
"ARC_3": 1.5707963267948966
}
arc = Arc(arg)
entArc = newDoc.saveEntity(arc)
sp = Point(0, 0)
ep = Point(100, 100)
arc.move(sp, ep)
entArc = newDoc.saveEntity(arc)
#Point
centerPoint = Point(100, 0)
dbPointEnt = newDoc.saveEntity(centerPoint)
centerPoint.move(sp, ep)
dbPointEnt = newDoc.saveEntity(centerPoint)
#Segment
sArg = {"SEGMENT_0": Point(100, 100), "SEGMENT_1": Point(150, 150)}
_st = Segment(sArg)
newSeg = newDoc.saveEntity(_st)
_st.move(sp, ep)
newDoc.saveEntity(_st)
#Ellipse
eArg = {"ELLIPSE_0": Point(100, 0), "ELLIPSE_1": 100, "ELLIPSE_2": 50}
_e = Ellipse(eArg)
newE = newDoc.saveEntity(_e)
_e.move(sp, ep)
newDoc.saveEntity(_e)
def point(self):
"""
Return The Point
"""
return Point(self.X, self.Y)
def GetTangentPoint(self, x, y, outx, outy):
"""
Get the tangent from an axternal point
args:
x,y is a point near the circle
xout,yout is a point far from the circle
return:
a tuple(x,y,x1,xy) that define the tangent line
"""
firstPoint = Point(x, y)
fromPoint = Point(outx, outy)
twoPointDistance = self.center.Dist(fromPoint)
if (twoPointDistance < self.radius):
return None, None
originPoint = Point(0.0, 0.0)
tanMod = math.sqrt(pow(twoPointDistance, 2) - pow(self.radius, 2))
tgAngle = math.asin(self.radius / twoPointDistance)
#Compute the x versor
xPoint = point.Point(1.0, 0.0)
xVector = Vector(originPoint, xPoint)
twoPointVector = Vector(fromPoint, self.center)
rightAngle = twoPointVector.Ang(xVector)
cx, cy = self.center.getCoords()
if (outy > cy): #stupid situation
rightAngle = -rightAngle
posAngle = rightAngle + tgAngle
negAngle = rightAngle - tgAngle
#Compute the Positive Tangent
xCord = math.cos(posAngle)
yCord = math.sin(posAngle)
dirPoint = Point(xCord, yCord) #Versor that point at the tangentPoint
ver = Vector(originPoint, dirPoint)
ver.Mult(tanMod)
tangVectorPoint = ver.Point()
posPoint = Point(tangVectorPoint + (outx, outy))
#Compute the Negative Tangent
xCord = math.cos(negAngle)
yCord = math.sin(negAngle)
dirPoint = Point(xCord, yCord) #Versor that point at the tangentPoint
ver = Vector(originPoint, dirPoint)
ver.Mult(tanMod)
tangVectorPoint = ver.Point()
negPoint = Point(tangVectorPoint + (outx, outy))
if firstPoint.Dist(posPoint) < firstPoint.Dist(negPoint):
return posPoint.getCoords()
else:
return negPoint.getCoords()
def clone(self):
"""
Create an identical copy of a Point.
"""
return Point(self.__x, self.__y)
def decodeText(self, value):
"""
encode the text given from the user
"""
point = None
distance = None
entitys = None
text = None
angle = None
try:
try:
raise self.kernelCommand.activeException()(None)
except ExcPoint:
if value.find(',') > -1: # ABSOLUTE CARTESIAN INPUT
x, y = value.split(',')
point = Point(float(x), float(y))
elif value.find('*') > -1: # RELATIVE CARTESIAN INPUT
x, y = value.split('*')
x = self.scene.fromPoint.getx() + float(x)
y = self.scene.fromPoint.gety() + float(y)
point = Point(x, y)
# implement here relative coordinates
elif value.find('<') > -1:
pass
# implement here polar coordinates
else: # DISTANCE+ANGLE FROM SCENE set coordinate based on distance input and angle from mouse position on the scene
d = float(value)
pX = self.scene.mouseOnSceneX
pY = self.scene.mouseOnSceneY
if self.scene.forceDirection is not None:
pc = Point(pX, pY)
pc = self.correctPositionForcedDirection(pc, self.scene.forceDirection)
pX, pY = pc.getCoords()
# if frompoint is not none else exception
dx = pX - self.scene.fromPoint.getx()
dy = pY - self.scene.fromPoint.gety()
a = math.atan2(dy, dx)
x = self.scene.fromPoint.getx() + d * math.cos(a)
y = self.scene.fromPoint.gety() + d * math.sin(a)
point = Point(x, y)
except (ExcEntity, ExcMultiEntity):
entitys = self.getIdsString(value)
except ExcEntityPoint:
#(4@10,20)
id, p = value.split('@')
x, y = p.split(',')
point = Point(float(x), float(y))
entitys = self.getIdsString(id)
return
except (ExcLenght, ExcInt, ExcBool):
distance = value
except(ExcAngle):
angle = value
except(ExcText):
text = value
except:
raise PyCadWrongImputData("BaseCommand : Wrong imput parameter for the command")
return (point,entitys, distance,angle, text)
def getClickedPoint(self, point, entity, force=None):
"""
Get segment snapPoints
Remarks:
force: [initsetting.SNAP_POINT_ARRAY element]
fromPoint: [Geoent.Pointfloat]
fromEnt: [GeoEnt.*]
"""
snapPoint = point
point = self.correctPositionForcedDirection(point, force)
if point != None:
snapPoint = point
lastSnapType = self.getLastForceSnap()
if SNAP_POINT_ARRAY["MID"] == self.activeSnap:
snapPoint = self.getSnapMiddlePoint(entity)
if lastSnapType: # Calculete in case of before constraint
if lastSnapType == SNAP_POINT_ARRAY["ORTO"]:
snapPoint = self.getSnapOrtoPoint(snapPoint)
elif lastSnapType == SNAP_POINT_ARRAY["TANGENT"]:
snapPoint = self.getSnapTangentPoint(snapPoint)
elif SNAP_POINT_ARRAY["END"] == self.activeSnap:
snapPoint = self.getSnapEndPoint(entity, point)
if lastSnapType: # Calculete in case of before constraint
if lastSnapType == SNAP_POINT_ARRAY["ORTO"]:
snapPoint = self.getSnapOrtoPoint(snapPoint)
elif lastSnapType == SNAP_POINT_ARRAY["TANGENT"]:
snapPoint = self.getSnapTangentPoint(snapPoint)
elif SNAP_POINT_ARRAY["ORTO"] == self.activeSnap:
if lastSnapType:
if lastSnapType == SNAP_POINT_ARRAY["TANGENT"]:
snapPoint = self.getTangentOrtoSnap(entity)
else:
snapPoint = self.getPointOrtoSnap(entity)
elif SNAP_POINT_ARRAY["CENTER"] == self.activeSnap:
snapPoint = self.getSnapCenterPoint(entity)
if lastSnapType: # Calculete in case of before constraint
if lastSnapType == SNAP_POINT_ARRAY["ORTO"]:
snapPoint = self.getSnapOrtoPoint(snapPoint)
elif lastSnapType == SNAP_POINT_ARRAY["TANGENT"]:
snapPoint = self.getSnapTangentPoint(snapPoint)
elif SNAP_POINT_ARRAY["QUADRANT"] == self.activeSnap:
snapPoint = self.getSnapQuadrantPoint(entity, snapPoint)
if lastSnapType: #Calculete in case of before constraint
if lastSnapType == SNAP_POINT_ARRAY["ORTO"]:
snapPoint = self.getSnapOrtoPoint(snapPoint)
elif lastSnapType == SNAP_POINT_ARRAY["TANGENT"]:
snapPoint = self.getSnapTangentPoint(snapPoint)
elif SNAP_POINT_ARRAY["ORIG"] == self.activeSnap:
snapPoint = Point(0.0, 0.0)
elif SNAP_POINT_ARRAY["INTERSECTION"] == self.activeSnap:
snapPoint = self.getIntersection(entity, snapPoint)
elif SNAP_POINT_ARRAY["ALL"] == self.activeSnap:
snapPoints = []
pnt = self.getSnapMiddlePoint(entity)
if pnt != None:
snapPoints.append(pnt)
pnt = self.getSnapEndPoint(entity, snapPoint)
if pnt != None:
snapPoints.append(pnt)
outPoint = (None, None)
for p in snapPoints:
if p != None:
distance = p.dist(snapPoint)
if outPoint[0] == None:
outPoint = (p, distance)
else:
if outPoint[1] > distance:
outPoint = (p, distance)
else:
if outPoint[0] != None:
snapPoint = outPoint[0]
#
# Reset to snap all
#
self.activeSnap = SNAP_POINT_ARRAY["ALL"]
#
if snapPoint == None:
self.__scene.fromPoint = point
return point
self.__scene.fromPoint = snapPoint
return snapPoint
def getSnapPoint(self, point, entity):
"""
Get snapPoints
Remarks:
force: [initsetting.SNAP_POINT_ARRAY element]
fromPoint: [Geoent.Pointfloat]
fromEnt: [GeoEnt.*]
"""
def pointReturn(pointCalculated, realPoint):
if pointCalculated == None:
return realPoint
return pointCalculated
if self.activeSnap == SNAP_POINT_ARRAY["NONE"]:
return point
else:
snapPoint = point
if SNAP_POINT_ARRAY["MID"] == self.activeSnap:
return pointReturn(self.getSnapMiddlePoint(entity), point)
elif SNAP_POINT_ARRAY["END"] == self.activeSnap:
return pointReturn(self.getSnapEndPoint(entity, point), point)
elif SNAP_POINT_ARRAY["ORTHO"] == self.activeSnap:
return pointReturn(self.getSnapOrtoPoint(entity, point), point)
elif SNAP_POINT_ARRAY["CENTER"] == self.activeSnap:
return pointReturn(self.getSnapCenterPoint(entity), point)
elif SNAP_POINT_ARRAY["QUADRANT"] == self.activeSnap:
return pointReturn(
self.getSnapQuadrantPoint(entity, snapPoint), point)
elif SNAP_POINT_ARRAY["ORIG"] == self.activeSnap:
return Point(0.0, 0.0)
elif SNAP_POINT_ARRAY["INTERSECTION"] == self.activeSnap:
return pointReturn(self.getIntersection(entity, snapPoint),
point)
elif SNAP_POINT_ARRAY["LIST"] == self.activeSnap:
#TODO: this should be used when checklist of snap will be enabled
snapPoints = []
if ACTIVE_SNAP_LIST.count(SNAP_POINT_ARRAY["MID"]) > 0:
pnt = self.getSnapMiddlePoint(entity)
if pnt != None:
snapPoints.append(pnt)
if ACTIVE_SNAP_LIST.count(SNAP_POINT_ARRAY["END"]) > 0:
pnt = self.getSnapEndPoint(entity, snapPoint)
if pnt != None:
snapPoints.append(pnt)
if ACTIVE_SNAP_LIST.count(SNAP_POINT_ARRAY["QUADRANT"]) > 0:
pnt = self.getSnapQuadrantPoint(entity, snapPoint)
if pnt != None:
snapPoints.append(pnt)
if ACTIVE_SNAP_LIST.count(SNAP_POINT_ARRAY["ORTHO"]) > 0:
pnt = self.getSnapOrtoPoint(entity, snapPoint)
if pnt != None:
snapPoints.append(pnt)
if ACTIVE_SNAP_LIST.count(
SNAP_POINT_ARRAY["INTERSECTION"]) > 0:
pnt = self.getIntersection(entity, snapPoint)
if pnt != None:
snapPoints.append(pnt)
outPoint = (None, None)
for p in snapPoints:
if p != None:
distance = p.dist(snapPoint)
if outPoint[0] == None:
outPoint = (p, distance)
else:
if outPoint[1] > distance:
outPoint = (p, distance)
else:
if outPoint[0] != None:
snapPoint = outPoint[0]
return pointReturn(snapPoint, point)
def decodeText(self, value):
"""
encode the text given from the user
"""
point = None
distance = None
entitys = None
text = None
angle = None
try:
try:
raise self.kernelCommand.activeException()(None)
except ExcPoint:
if value.find(',') > -1: # ABSOLUTE CARTESIAN INPUT
x, y = value.split(',')
point = Point(float(x), float(y))
elif value.find('*') > -1: # RELATIVE CARTESIAN INPUT
x, y = value.split('*')
x = self.scene.fromPoint.getx() + float(x)
y = self.scene.fromPoint.gety() + float(y)
point = Point(x, y)
# implement here relative coordinates
elif value.find('<') > -1:
pass
# implement here polar coordinates
else: # DISTANCE+ANGLE FROM SCENE set coordinate based on distance input and angle from mouse position on the scene
d = float(value)
pX = self.scene.mouseOnSceneX
pY = self.scene.mouseOnSceneY
if self.scene.forceDirection is not None:
pc = Point(pX, pY)
pc = self.correctPositionForcedDirection(
pc, self.scene.forceDirection)
pX, pY = pc.getCoords()
# if frompoint is not none else exception
dx = pX - self.scene.fromPoint.getx()
dy = pY - self.scene.fromPoint.gety()
a = math.atan2(dy, dx)
x = self.scene.fromPoint.getx() + d * math.cos(a)
y = self.scene.fromPoint.gety() + d * math.sin(a)
point = Point(x, y)
except (ExcEntity, ExcMultiEntity):
entitys = self.getIdsString(value)
except ExcEntityPoint:
#(4@10,20)
id, p = value.split('@')
x, y = p.split(',')
point = Point(float(x), float(y))
entitys = self.getIdsString(id)
return
except (ExcLenght, ExcInt, ExcBool):
distance = value
except (ExcAngle):
angle = value
except (ExcText):
text = value
except:
raise PyCadWrongImputData(
"BaseCommand : Wrong imput parameter for the command")
return (point, entitys, distance, angle, text)
def applyCommand(self):
if len(self.value)!=1:
raise PyCadWrongImputData("Wrong number of input parameter")
point=Point(self.value[0])
self.document.saveEntity(point)
def multitest(self):
p1 = Point(0, 0)
p2 = Point(10, 0)
p3 = Point(0, 10)
pp1 = Point(1, 0)
pp2 = Point(0, 3)
self.testBisector(p1, p2, p3, pp1, pp2)
self.testFillet(p1, p2, p3, pp1, pp2)
p1 = Point(0, 0)
p2 = Point(-10, 0)
p3 = Point(0, 10)
pp1 = Point(-1, 0)
pp2 = Point(0, 3)
self.testBisector(p1, p2, p3, pp1, pp2)
self.testFillet(p1, p2, p3, pp1, pp2)
p1 = Point(0, 0)
p2 = Point(-10, 0)
p3 = Point(0, -10)
pp1 = Point(-1, 0)
pp2 = Point(0, -3)
self.testBisector(p1, p2, p3, pp1, pp2)
self.testFillet(p1, p2, p3, pp1, pp2)
p1 = Point(0, 0)
p2 = Point(10, 0)
p3 = Point(0, -10)
pp1 = Point(1, 0)
pp2 = Point(0, -3)
self.testBisector(p1, p2, p3, pp1, pp2)
self.testFillet(p1, p2, p3, pp1, pp2)
p1 = Point(100, 0)
p2 = Point(200, 0)
p3 = Point(200, 100)
pp1 = Point(110, -1)
pp2 = Point(112, 30)
self.testBisector(p1, p2, p3, pp1, pp2)
self.testFillet(p1, p2, p3, pp1, pp2)
p1 = Point(100, 100)
p2 = Point(200, 0)
p3 = Point(200, 100)
pp1 = Point(110, -1)
pp2 = Point(112, 30)
self.testBisector(p1, p2, p3, pp1, pp2, 30)
self.testFillet(p1, p2, p3, pp1, pp2, 30)