def _contact_geometry_GCS(self, q):
"""
Function evaluates contact geometry in GCS
Function evaluates:
self._n_GCS: normal of contact in GCS:
self._t_GCS: tangent of contact in GCS
self.node_GCS: contact point in GCS (on body i and on body j - unverified)
:param q:
:return delta:
:return distance:
"""
# print "_contact_geometry_GCS()"
# evaluate coordinates in GCS of mid frame section and pin center
pin_CP_GCS, slot_CP_GCS, slot_frame_nodes_GCS, slot_frame_normals_GCS, slot_frame_tangents_GCS = self._contact_geometry_CP_GCS(q)
# center points in GCS
self.u_CP_GCS_list = [pin_CP_GCS, slot_CP_GCS[0], slot_CP_GCS[1]]
# print "self.u_CP_GCS_list =", self.u_CP_GCS_list
# time.sleep(100)
# evaluate position of pin in slot:
# section jP
# section jPjR
# section jR
self.pin_in_section_jP, self.pin_in_section_jPjR, self.pin_in_section_jR = self._check_pin_position(slot_frame_nodes_GCS, pin_CP_GCS)
# evaluate contact distance and penetration depth based on in what part of the slot is the pin
if self.pin_in_section_jPjR:
# define empty list to store 2 distance object
# distance of pin CP to edge AB
# distance of pin CP to edge CD
distance_obj_list = []
# print "--------------------"
for i, (_n, _t) in enumerate(zip(slot_frame_normals_GCS, slot_frame_tangents_GCS)):
_distance_obj = DistanceLineNode(u_iP=slot_frame_nodes_GCS[2*i, :], u_jP=pin_CP_GCS, normal=_n, u_iR=slot_frame_nodes_GCS[2*i+1, :], tangent=_t)
distance_obj_list.append(_distance_obj)
# print "i =", i, "_distance =", _distance_obj._distance
# get distance object with min distance attribute value
self._distance_obj = min(distance_obj_list, key=attrgetter('_distance'))
# add edge id to object to have info with which edge of flat slot surface is contact with a pin
self._distance_obj.edge_id = distance_obj_list.index(self._distance_obj)
# get distance attribute from distance object
_distance = self._distance_obj._distance
# evaluated penetration depth
_delta = self._evaluate_delta_flat_section(_distance)
# print "_delta =", _delta
# tangent in GCS
# pprint(vars(self._distance_obj))
# time.sleep(100)
else:
if self.pin_in_section_jP:
# calculate distance between axis of both bodies in half revolute clearance joint at point Pj
_slot_CP_GCS = slot_CP_GCS[0]
elif self.pin_in_section_jR:
# calculate distance between axis of both bodies in half revolute clearance joint at point Rj
_slot_CP_GCS = slot_CP_GCS[1]
else:
raise ValueError, "Contact point not in section!"
# print "pin_CP_GCS =", pin_CP_GCS
# print "_slot_CP_GCS =", _slot_CP_GCS
self._distance_obj = DistanceRevoluteClearanceJoint(_slot_CP_GCS, pin_CP_GCS, parent=self)
# penetration depth is difference between nominal radial clearance and actual calculated clearance at time t
_distance = self._distance_obj._distance
# print "_distance =", _distance
_delta = self._evaluate_delta_cylindrical_section(_distance)
# print "_delta =", _delta
# if penetration depth is below small value, contact is present and contact geometry parameters are evaluated
# if _delta <= self._delta0 and not self._contact_point_found:
# if self.pin_in_section_jPjR:
# # contact normal in GCS
# self._n_GCS = self._distance_obj.normal
return _distance, _delta
class PinSlotClearanceJointLinear(Contact):
"""
classdocs
"""
__id = itertools.count(0)
def __init__(self, _type, body_id_i, body_id_j, u_iP, u_jP, u_jR, R0_i, h0_jP, L=None, h0_jR=None, properties_dict=[], parent=None):
"""
:param _type:
:param body_id_i: id of a body - pin
:param body_id_j: id of a body - slot
:param u_iP: point vector to center of a pin on body i (in body CAD CS)
:param u_jP: point vector to start point center of the slot on body j (in body CAD CS)
:param u_jR: point vector to end point center of the slot on body j (in body CAD CS)
:param R0_i: radius of a pin on body i
:param h0_jP: width of a slot at start point center on body i
:param h0_jR: width of a slot at end point center on body j
:return:
"""
# number
self.contact_id = self.__id.next()
self._name = "Pin_Slot_Clearance_Joint_"+str(self.contact_id)
super(PinSlotClearanceJointLinear, self).__init__(_type, body_id_i, body_id_j, name=self._name, properties_dict=properties_dict, parent=parent)
# parent
self._parent = parent
# type of contact
self._type = "pin-slot clearance joint linear"
# contact model
# add all to list of CP - center points
# 1 - body i (pin) center
# 2 - body j (slot) center uP
# 3 - body j (slot) center uR
self.u_CP_LCS_list = []
# body i
# body i (pin) geometry parameters
if self._parent is not None:
if hasattr(self._parent._parent.bodies[body_id_i], "CM_CAD_LCS"):
self.u_iP = cad2cm_lcs(u_iP, self._parent._parent.bodies[body_id_i].CM_CAD_LCS, 0)
else:
self.u_iP = u_iP
self.u_CP_LCS_list.append(self.u_iP)
# radius of a pin
self.R0_i = R0_i
# list of radii of pin and of slot
self.R0_list = [self.R0_i, h0_jP / 2.]
# body j
# body j (slot) geometry data
# predefine empty list of slot centers
self.u_CP_slot_LCS = []
if self._parent is not None:
if hasattr(self._parent._parent.bodies[body_id_j], "CM_CAD_LCS"):
self.u_jP = cad2cm_lcs(u_jP, self._parent._parent.bodies[body_id_j].CM_CAD_LCS, 0)
self.u_jR = cad2cm_lcs(u_jR, self._parent._parent.bodies[body_id_j].CM_CAD_LCS, 0)
else:
# vector to first point of center of a slot in
self.u_jP = u_jP
# vector to second point of center of a slot
self.u_jR = u_jR
# append to centers list of a slot
self.u_CP_slot_LCS.append(self.u_jP)
self.u_CP_slot_LCS.append(self.u_jR)
# append to centers list
self.u_CP_LCS_list.append(self.u_jP)
self.u_CP_LCS_list.append(self.u_jR)
# in GCS
self.u_CP_GCS_list = [np.zeros(2), np.zeros(2), np.zeros(2)]
# body ids for three point (1 point pin, 2 points slot)
self.body_id_extended_list = [self.body_id_i, self.body_id_j, self.body_id_j]
# width of a slot at first point of center of a slot
self.h0_jP = h0_jP
# width of a slot at second point of center of a slot
if h0_jR is None:
self.h0_jR = h0_jP
else:
self.h0_jR = h0_jR
# clearance
self._radial_clearance = (self.h0_jR / 2.) - self.R0_i
# tangent of slot edge
self.t_LCS = self.u_jR - self.u_jP
# length of flat edge of slot
self.L = np.linalg.norm(self.t_LCS, ord=2)
# unit vector of direction of edge
self.t_LCS_unit_vector = self.t_LCS / self.L
# list of tangents in LCS or edge vectors
self.t_edge_slot_LCS = []
self.t_edge_slot_LCS.append(self.t_LCS_unit_vector)
self.t_edge_slot_LCS.append(-self.t_LCS_unit_vector)
# normal unit vector
self.n_LCS_unit_vector = t2n(self.t_LCS_unit_vector)
# list of normals in LCS of flat edges in slot- section jPjR
self.n_edge_slot_LCS = []
self.n_edge_slot_LCS.append(self.n_LCS_unit_vector)
self.n_edge_slot_LCS.append(-self.n_LCS_unit_vector)
# create slot frame geometry for flat surface
self.frame_nodes_LCS = self._create_slot_frame_flat_surface(self.u_jP, self.u_jR, self.n_LCS_unit_vector, self.t_LCS_unit_vector, self.h0_jP)
# list of markers
self.markers = self._create_markers()
# reset additional parameters before simulation
self.reset()
def _create_markers(self):
"""
Function creates markers
:return:
"""
markers = []
# create markers for joint centers
for i, u_P in enumerate(self.u_CP_LCS_list):
# node coordinates
_node = np.array(np.append(u_P, self.z_dim), dtype="float32")
# get correct body object
if i == 0:
body = self.body_list[0]
if i == 1 or i == 2:
body = self.body_list[1]
# create marker object
_marker = Marker(_node, visible=True, parent=body)
# append marker to list of body markers
body.markers.append(_marker)
# append marker to list of contact markers
markers.append(_marker)
return markers
def reset(self):
"""
Function is used to reset simulation parameters before new simulation run
:return:
"""
# contact status
# left half cylinder
self.pin_in_section_jP = False
# flat section
self.pin_in_section_jPjR = False
# right half cylinder
self.pin_in_section_jR = False
# predefined list of contact point on each body (one contact point on a body)
self.u_P_list_LCS = np.array([np.zeros(2), np.zeros(2)])
def check_for_contact(self, q):
"""
Check for contact
:param q:
:return:
"""
# print "check_for_contact()"
self._distance, self._delta = self._contact_geometry_GCS(q)
# print "self._delta =", self._delta
# print "self._delta@check_for_contact() =", self._delta
# add distance value to container
# self._distance_solution_container = np.append(self._distance_solution_container, self._delta)
# check sign
self._sign_check = np.sign(self._delta * self._distance_solution_container[-1])
# contact has happened, but time step has to be reduced as initial penetration depth is too large
# if (np.sign(self._dqn_solution_container[-1]) == +1) or (self._dqn_solution_container[-1] == 0) and (self._sign_check == -1) and (self._distance >= self._radial_clearance):
# print "(self._sign_check == -1) and (self._delta <= 0) =", (self._sign_check == -1) and (self._delta <= 0)
if (self._sign_check == -1) and (self._delta <= 0):
# print "sign and delta"
# beginning of contact detected, all parameters are within limits
if abs(self._delta) <= self.distance_TOL:
# else:
self._delta0 = self._delta
self.contact_detected = True
self.contact_distance_inside_tolerance = True
self.status = 1
# print "---------------------------------------------"
# print "contact detected", "L =", self.L
# print "self._delta =", self._delta
# print "DA =", self._pin_distance_to_DA_obj._distance
# print "BC =", self._pin_distance_to_BC_obj._distance
# print "section jPjR =", self._pin_distance_to_DA_obj._distance < self.L, self._pin_distance_to_BC_obj._distance < self.L
# print "section jP =", self._pin_distance_to_DA_obj._distance < self.L, self._pin_distance_to_BC_obj._distance >= self.L
# print "section jR =", self._pin_distance_to_DA_obj._distance >= self.L, self._pin_distance_to_BC_obj._distance < self.L
# print "t =", self.t, "step =", self._step, "pin in: ",
# if self.pin_in_section_jPjR:
# print "flat section"
# if self.pin_in_section_jP:
# print "section jP"
# if self.pin_in_section_jR:
# print "section jR"
# print "contact point =",
# print int(self._step_num_solution_container[-1]), self.status, t, self._distance,
return 1
# step back
if abs(self._delta) > self.distance_TOL:
self.contact_detected = True
self.status = -1
# self._distance_solution_container = np.delete(self._distance_solution_container, -1)
return -1
# all calculated distances are greater than tolerance and bodies are not in contact
self.status = 0
# self._status_container = np.append(self._status_container, self.status)
self.no_contact()
return 0
def contact_update(self, step, t, q):
"""
:param step:
:param t:
:param q:
:return:
"""
# print "contact_update ="
# update time step
self._step = step
# current contact velocity at time t
self._dq_n, self._dq_t = self._contact_velocity(q)
# calculate distance between joint centers and delta (penetration)
self._distance, self._delta = self._contact_geometry_GCS(q)
# print "self._delta@ =", self._delta,
# print "self._delta0 =", self._delta0
# print self._delta <= self._delta0
# print "self._contact_point_found =", self._contact_point_found
# time.sleep(1)
if self._delta <= self._delta0:#(self._distance >= self._radial_clearance) and (abs(self._delta) >= self.distance_TOL):
# print "exe??"
self.status = 1
else:
self.status = 0
self.contact_detected = False
self.contact_distance_inside_tolerance = False
# self.list_of_contact_force_objects_constructed = False
self._contact_point_found = False
self.initial_contact_velocity_calculated = False
self.no_contact()
return self.status
def _get_contact_geometry_data(self, q):
"""
Function locates and creates contact point vector in GCS based on position of both bodies in contact
:param q:
:return:
"""
# print "_get_contact_geometry_data()"
if self.pin_in_section_jPjR:
# contact point on body j - slot
# GCS
self.u_P_GCS_list[1] = self.u_jP_GCS = self._distance_obj.contact_point_on_line_GCS()
# LCS
self.u_jP_LCS = u_P_gcs2lcs(self.u_jP_GCS, q, self.body_id_j)
# print "self.u_jP_LCS =", self.u_jP_LCS
# get normal in GCS
self._n_GCS = self._distance_obj.normal
# print "self._n_GCS =", self._n_GCS
elif self.pin_in_section_jP or self.pin_in_section_jR:
# get normal in GCS
self._n_GCS = self._distance_obj._distance_vector / self._distance_obj._distance
else:
raise ValueError, "Contact in slot section not detected!"
# get tangent in CS
self._t_GCS = n2t(self._n_GCS)
self._contact_point_found = True
def _contact_geometry_GCS(self, q):
"""
Function evaluates contact geometry in GCS
Function evaluates:
self._n_GCS: normal of contact in GCS:
self._t_GCS: tangent of contact in GCS
self.node_GCS: contact point in GCS (on body i and on body j - unverified)
:param q:
:return delta:
:return distance:
"""
# print "_contact_geometry_GCS()"
# evaluate coordinates in GCS of mid frame section and pin center
pin_CP_GCS, slot_CP_GCS, slot_frame_nodes_GCS, slot_frame_normals_GCS, slot_frame_tangents_GCS = self._contact_geometry_CP_GCS(q)
# center points in GCS
self.u_CP_GCS_list = [pin_CP_GCS, slot_CP_GCS[0], slot_CP_GCS[1]]
# print "self.u_CP_GCS_list =", self.u_CP_GCS_list
# time.sleep(100)
# evaluate position of pin in slot:
# section jP
# section jPjR
# section jR
self.pin_in_section_jP, self.pin_in_section_jPjR, self.pin_in_section_jR = self._check_pin_position(slot_frame_nodes_GCS, pin_CP_GCS)
# evaluate contact distance and penetration depth based on in what part of the slot is the pin
if self.pin_in_section_jPjR:
# define empty list to store 2 distance object
# distance of pin CP to edge AB
# distance of pin CP to edge CD
distance_obj_list = []
# print "--------------------"
for i, (_n, _t) in enumerate(zip(slot_frame_normals_GCS, slot_frame_tangents_GCS)):
_distance_obj = DistanceLineNode(u_iP=slot_frame_nodes_GCS[2*i, :], u_jP=pin_CP_GCS, normal=_n, u_iR=slot_frame_nodes_GCS[2*i+1, :], tangent=_t)
distance_obj_list.append(_distance_obj)
# print "i =", i, "_distance =", _distance_obj._distance
# get distance object with min distance attribute value
self._distance_obj = min(distance_obj_list, key=attrgetter('_distance'))
# add edge id to object to have info with which edge of flat slot surface is contact with a pin
self._distance_obj.edge_id = distance_obj_list.index(self._distance_obj)
# get distance attribute from distance object
_distance = self._distance_obj._distance
# evaluated penetration depth
_delta = self._evaluate_delta_flat_section(_distance)
# print "_delta =", _delta
# tangent in GCS
# pprint(vars(self._distance_obj))
# time.sleep(100)
else:
if self.pin_in_section_jP:
# calculate distance between axis of both bodies in half revolute clearance joint at point Pj
_slot_CP_GCS = slot_CP_GCS[0]
elif self.pin_in_section_jR:
# calculate distance between axis of both bodies in half revolute clearance joint at point Rj
_slot_CP_GCS = slot_CP_GCS[1]
else:
raise ValueError, "Contact point not in section!"
# print "pin_CP_GCS =", pin_CP_GCS
# print "_slot_CP_GCS =", _slot_CP_GCS
self._distance_obj = DistanceRevoluteClearanceJoint(_slot_CP_GCS, pin_CP_GCS, parent=self)
# penetration depth is difference between nominal radial clearance and actual calculated clearance at time t
_distance = self._distance_obj._distance
# print "_distance =", _distance
_delta = self._evaluate_delta_cylindrical_section(_distance)
# print "_delta =", _delta
# if penetration depth is below small value, contact is present and contact geometry parameters are evaluated
# if _delta <= self._delta0 and not self._contact_point_found:
# if self.pin_in_section_jPjR:
# # contact normal in GCS
# self._n_GCS = self._distance_obj.normal
return _distance, _delta
def _contact_geometry_LCS(self, q):
"""
Function evaluates contact geometry parameters in body LCS based on contact geometry in GCS
Function evaluates:
self._n_LCS_list: normal of contact in body LCS:
self._t_LCS_list: tangent of contact in body LCS
self.u_P_LCS_list: contact point in body LCS
"""
# print "_contact_geometry_LCS()"
if self.pin_in_section_jPjR:
# contact point on body i - pin
# in LCS
self.u_P_LCS_list[0] = self.u_iP_LCS = Ai_ui_P_vector(-self._n_GCS * self.R0_i, q2theta_i(q, self.body_id_i))
# in GCS
self.u_P_GCS_list[0] = self.u_iP_GCS = q2R_i(q, self.body_id_i) + self.u_iP_LCS
# contact point on body j in GCS
self.u_P_GCS = self.u_P_GCS_list[1] = self.u_jP_GCS = self._distance_obj.contact_point_on_line_GCS()
# time.sleep(10)
# contact point on body j in LCS
self.u_P_LCS_list[1] = self.u_jP_LCS = gcs2cm_lcs(self.u_P_GCS, q2R_i(q, self.body_id_j), q2theta_i(q, self.body_id_j))
# in GCS
# self.u_iP_GCS = u_P_lcs2gcs(self.u_iP_LCS, q, self.body_id_i) + (-self._n_GCS) * self.R0_i
# print "self.u_iP_GCS =", self.u_iP_GCS
# get normal and tangent of each body
for i, (sign, body_id) in enumerate(zip([-1, +1], self.body_id_list)):
theta = q2theta_i(q, body_id)
# evaluate body normal in body LCS
self._n_LCS_list[i] = gcs2cm_lcs(sign * self._n_GCS, theta=theta)
# evaluate body tangent in body LCS
self._t_LCS_list[i] = gcs2cm_lcs(sign * self._t_GCS, theta=theta)
elif self.pin_in_section_jP or self.pin_in_section_jR:
# create normal list in LCS
self._n_GCS_list = [self._n_GCS, -self._n_GCS]
for i, (body_id, _normal) in enumerate(zip(self.body_id_list, self._n_GCS_list)):
# normal in LCS
_theta = q2theta_i(q, body_id)
# _normal_LCS = Ai_ui_P_vector(_normal, _theta)
_normal_LCS = uP_gcs2lcs(_normal, _theta)
# append normal to list
self._n_LCS_list[i] = _normal_LCS
if self.pin_in_section_jP:
_u_CP_LCS_list = [self.u_CP_LCS_list[0], self.u_CP_LCS_list[1]]
_u_CP_GCS_list = [self.u_CP_GCS_list[0], self.u_CP_GCS_list[1]]
if self.pin_in_section_jR:
_u_CP_LCS_list = [self.u_CP_LCS_list[0], self.u_CP_LCS_list[2]]
_u_CP_GCS_list = [self.u_CP_GCS_list[0], self.u_CP_GCS_list[2]]
# evaluate actual contact point in LCS of each body and in GCS
for i, (body_id, _u_CP_LCS, _R0) in enumerate(zip(self.body_id_list, _u_CP_LCS_list, self.R0_list)):
# R of body
R = q2R_i(q, body_id)
# theta of body
theta = q2theta_i(q, body_id)
# contact point in body LCS
_u_P_LCS = _u_CP_LCS
self.u_P_LCS_list[i] = _u_P_LCS# + _R0 * self._n_GCS
# contact point in GCS
self.u_P_GCS_list[i] = R + Ai_ui_P_vector(_u_CP_LCS, theta) + _R0 * self._n_GCS
# print "self.u_P_GCS_list =", self.u_P_GCS_list
def _evaluate_delta_flat_section(self, distance):
"""
Evaluate penetration depth - delta for contact between pin and flat surface of the slot
:param distamce:
:return:
"""
delta = distance - self.R0_i#((self.h0_jP - 2 * ) / 2.) -
return delta
def _evaluate_delta_cylindrical_section(self, distance):
"""
Evaluate penetration depth - delta for contact between pin and cylindrical surface of the slot
:param distamce:
:return:
"""
# print "_evaluate_delta_cylindrical_section()"
# print "distance =", distance
# print "self._radial_clearance =", self._radial_clearance
delta = self._radial_clearance - distance
return delta
def _check_pin_position(self, frame_nodes_GCS, pin_CP_GCS):
"""
Function eveluates where in slot is pin located to use correct equation for evaluation of penetration depth
:param frame_nodes_GCS: position of slot frame nodes in GCS
:param pin_CP_GCS: position of pin center in GCS
:return:
"""
# print "_check_pin_position()"
# set default values
pin_in_section_jP = pin_in_section_jPjR = pin_in_section_jR = False
# distance of pin center to line DA and BC
# node A
u_Aj = frame_nodes_GCS[0, :]
# node B
u_Bj = frame_nodes_GCS[1, :]
# node C
u_Cj = frame_nodes_GCS[2, :]
# node D
u_Dj = frame_nodes_GCS[3, :]
# DA
self._pin_distance_to_DA_obj = DistanceLineNode(u_Aj, pin_CP_GCS, u_iR=u_Dj, parent=self)
# print "_pin_distance_to_DA_obj =", _pin_distance_to_DA_obj._distance
# BC
self._pin_distance_to_BC_obj = DistanceLineNode(u_Cj, pin_CP_GCS, u_iR=u_Bj, parent=self)
# print "_pin_distance_to_BC_obj =", _pin_distance_to_BC_obj._distance
if self._pin_distance_to_DA_obj._distance < self.L and self._pin_distance_to_BC_obj._distance < self.L:
pin_in_section_jPjR = True
# print "pin in jPjR"
if self._pin_distance_to_DA_obj._distance < self.L and self._pin_distance_to_BC_obj._distance >= self.L:
pin_in_section_jP = True
# print "pin in jP"
if self._pin_distance_to_DA_obj._distance >= self.L and self._pin_distance_to_BC_obj._distance < self.L:
pin_in_section_jR = True
# print "pin in jR"
# section from (u_)jP to (u_)jR
# if (frame_nodes_GCS[0, 0] < pin_CP_GCS[0] < frame_nodes_GCS[1, 0]) and (frame_nodes_GCS[0, 1] < pin_CP_GCS[1] < frame_nodes_GCS[2, 1]):
# pin_in_section_jPjR = True
# # print "pin in jPjR"
#
# # half-circlurar section at (u_)jP
# if (pin_CP_GCS[0] <= max(frame_nodes_GCS[0, 0], frame_nodes_GCS[3, 0])) and (pin_CP_GCS[1] <= max(frame_nodes_GCS[0, 1], frame_nodes_GCS[3, 1])):
# # print "pin_CP_GCS[0] =", pin_CP_GCS[0]
# # print "max x =", max(frame_nodes_GCS[0, 0], frame_nodes_GCS[3, 0])
# # print "pin_CP_GCS[1] =", pin_CP_GCS[1]
# # print "max y =", max(frame_nodes_GCS[0, 1], frame_nodes_GCS[3, 1])
# pin_in_section_jP = True
# # print "pin in jP"
#
# # half-circlurar section at (u_)jR
# if (pin_CP_GCS[0] >= min(frame_nodes_GCS[1, 0], frame_nodes_GCS[2, 0])) and (pin_CP_GCS[1] >= min(frame_nodes_GCS[1, 1], frame_nodes_GCS[2, 1])):
# pin_in_section_jR = True
# # print "pin in jR"
return pin_in_section_jP, pin_in_section_jPjR, pin_in_section_jR
def _contact_geometry_CP_GCS(self, q):
"""
:param q:
:return:
"""
# print "_contact_geometry_CP_GCS()"
# calculate position of pin/hole centers of each body in GCS
# this is a list of CP - center points
# 1 -
u_CP_list_GCS = []
# center points in GCS
# for uP, id in zip(self.u_CP_LCS_list, self.body_id_extended_list):
# uP_gcs = q2R_i(q, id) + Ai_ui_P_vector(uP, q2theta_i(q, id))
# print "uP_gcs =", uP_gcs
# print "_update_slot_frame_flat_surface"
# slot frame nodes in GCS
frame_nodes_GCS, frame_normals_GCS, frame_tangents_GCS = self._slot_frame_flat_surface_GCS(q)
# print "frame_nodes_GCS =", frame_nodes_GCS
# pin center in GCS
pin_CP_GCS = self._pin_GCS(q)
# print "pin_CP_GCS =", pin_CP_GCS
# slot center points in GCS
slot_CP_GCS = self._slot_GCS(q)
return pin_CP_GCS, slot_CP_GCS, frame_nodes_GCS, frame_normals_GCS, frame_tangents_GCS
def _pin_GCS(self, q):
"""
Function updates and calculates position of a pin center in global coordinates - GCS
:param q:
:return:
"""
# CP_GCS = q2R_i(q, self.body_id_i) + Ai_ui_P_vector(self.u_iP, q2theta_i(q, self.body_id_i))
CP_GCS = u_P_lcs2gcs(self.u_iP, q, self.body_id_i)
return CP_GCS
def _slot_GCS(self, q):
"""
:param q:
:return:
"""
slot_CP_GCS = []
for CP in self.u_CP_slot_LCS:
_uP_gcs = u_P_lcs2gcs(CP, q, self.body_id_j)
slot_CP_GCS.append(_uP_gcs)
return slot_CP_GCS
def _create_slot_frame_flat_surface(self, uPj, uRj, n, t, hPj, hRj=None):
"""
Direction of tangent uPj->hRj
Direction of normal uPj->T1
Frame shape:
A------------------>B
| |
uPj uRj
| |
D<------------------C
:param q: a vector (numpy array) of positions
:return frame_nodes_LCS: a matrix (numpy array) of frame nodes
"""
# 4 frame nodes in a matrix
frame_nodes_LCS = np.array([uPj - n*hPj*.5, #0 A
uRj - n*hPj*.5, #1 B
uRj + n*hPj*.5, #2 C
uPj + n*hPj*.5], #3 D
dtype='float32')
return frame_nodes_LCS
def _slot_frame_flat_surface_GCS(self, q):
"""
Function updates and calculates position of slot frame in global coordinates - GCS
:param q:
:return:
"""
# nodes in GCS
frame_nodes_GCS = q2R_i(q, self.body_id_j) + Ai_ui_P_vector(self.frame_nodes_LCS, q2theta_i(q, self.body_id_j))
# normals in GCS
frame_normals_GCS = Ai_ui_P_vector(np.array(self.n_edge_slot_LCS), q2theta_i(q, self.body_id_j))
# tangents in GCS
frame_tangents_GCS = Ai_ui_P_vector(np.array(self.t_edge_slot_LCS), q2theta_i(q, self.body_id_j))
return frame_nodes_GCS, frame_normals_GCS, frame_tangents_GCS
