def __init__(s,
MapperPRTL,
src_msgs,
sink_msgs,
src_delay,
sink_delay,
dump_vcd=False,
test_verilog=False):
# Instantiate Models
s.src = TestSource(MapperReqMsg(), src_msgs, src_delay)
s.mapper = MapperPRTL()
s.sink = TestSink(MapperRespMsg(), sink_msgs, sink_delay)
# Dump VCD
if dump_vcd:
s.mapper.vcd_file = dump_vcd
# Translation
if test_verilog:
s.mapper = TranslationTool(s.mapper)
# Connect
s.connect(s.src.out, s.mapper.req)
s.connect(s.mapper.resp, s.sink.in_)
def __init__(s, nbits=8, mbits=1):
# Interface
s.req = InValRdyBundle(MapperReqMsg())
s.resp = OutValRdyBundle(MapperRespMsg())
# Instantiate datapath and control
s.dpath = MapperDpathRTL(nbits, mbits)
s.ctrl = MapperCtrlRTL(mbits)
# connect input interface to dpath/ctrl
s.connect(s.req.msg.data, s.dpath.req_msg_data)
s.connect(s.req.msg.type_, s.ctrl.req_msg_type)
s.connect(s.req.val, s.ctrl.req_val)
s.connect(s.resp.rdy, s.ctrl.resp_rdy)
# connect dpath/ctrl to output interface
s.connect(s.dpath.resp_msg_data, s.resp.msg.data)
s.connect(s.ctrl.resp_msg_type, s.resp.msg.type_)
s.connect(s.ctrl.req_rdy, s.req.rdy)
s.connect(s.ctrl.resp_val, s.resp.val)
# connect dpath/ctrl
s.connect(s.ctrl.result_reg_en, s.dpath.result_reg_en)
s.connect(s.ctrl.reference_reg_en, s.dpath.reference_reg_en)
def __init__(s):
s.req = InValRdyBundle(MapperReqMsg())
s.resp = OutValRdyBundle(MapperRespMsg())
s.dpath = MapperDpath()
s.ctrl = MapperCtrl()
s.connect(s.req.msg.data, s.dpath.req_msg_data)
s.connect(s.req.msg.digit, s.dpath.req_msg_digit)
s.connect(s.req.msg.type_, s.dpath.req_msg_type)
s.connect(s.req.msg.type_, s.ctrl.req_msg_type)
s.connect(s.req.val, s.ctrl.req_val)
s.connect(s.req.rdy, s.ctrl.req_rdy)
s.connect(s.dpath.resp_msg_data, s.resp.msg.data)
s.connect(s.dpath.resp_msg_digit, s.resp.msg.digit)
s.connect(s.dpath.resp_msg_type, s.resp.msg.type_)
s.connect(s.ctrl.resp_val, s.resp.val)
s.connect(s.ctrl.resp_rdy, s.resp.rdy)
s.connect_auto(s.dpath, s.ctrl)
def mk_resp_msg(data, type, digit):
msg = MapperRespMsg()
msg.data = data
msg.type_ = type
msg.digit = digit
return msg
def __init__(s, mapper_num=2, reducer_num=1):
# Top Level Interface
s.in_ = InValRdyBundle(WordcountReqMsg())
s.out = OutValRdyBundle(WordcountRespMsg())
s.reference = InPort(32)
s.base = InPort(32)
s.size = InPort(32)
# Global Memory Interface
s.gmem_req = OutValRdyBundle(MemReqMsg(8, 32, 32))
s.gmem_resp = InValRdyBundle(MemRespMsg(8, 32))
# Local Memory Interface
s.lmem_req = OutValRdyBundle(MemReqMsg(8, 32, 32))
s.lmem_resp = InValRdyBundle(MemRespMsg(8, 32))
# Mapper Interface
s.map_req = OutValRdyBundle[mapper_num](MapperReqMsg())
s.map_resp = InValRdyBundle[mapper_num](MapperRespMsg())
# Reducer Interface
s.red_req = OutValRdyBundle[reducer_num](ReducerReqMsg())
s.red_resp = InValRdyBundle[reducer_num](ReducerRespMsg())
# Task Queue
s.task_queue = NormalQueue(2, Bits(32))
# Idle Queue storing mapper ID
s.idle_queue = NormalQueue(2, Bits(2))
# States
s.STATE_IDLE = 0 # Idle state, scheduler waiting for top level to start
s.STATE_SOURCE = 1 # Source state, handling with Test Source, getting base, size, ref info
s.STATE_INIT = 2 # Init state, scheduler assigns input info to each Mapper
s.STATE_START = 3 # Start state, scheduler starts scheduling
s.STATE_END = 4 # End state, shceduler loads all task from global memory and it is done
s.state = RegRst(4, reset_value=s.STATE_IDLE)
# Counters
s.init_count = Wire(2)
s.input_count = Wire(32)
@s.tick
def counter():
if (s.idle_queue.enq.val and s.init):
s.init_count.next = s.init_count + 1
if (s.gmem_req.val):
s.input_count.next = s.input_count + 1
# Signals
s.go = Wire(1) # go signal tells scheduler to start scheduling
s.mapper_done = Wire(1) # if one or more mapper is done and send resp
s.init = Wire(1) # init signal indicates scheduler at initial state
s.end = Wire(1) # end signal indicates all task are loaded
s.done = Wire(1) # done signal indicates everything is done
s.num_task_queue = Wire(2)
s.connect(s.task_queue.num_free_entries, s.num_task_queue)
@s.combinational
def logic():
s.mapper_done.value = s.map_resp[0].val | s.map_resp[1].val
#---------------------------------------------------------------------
# Assign Task to Mapper Combinational Logic
#---------------------------------------------------------------------
@s.combinational
def mapper():
# initialize mapper req and resp handshake signals
for i in xrange(mapper_num):
s.map_req[i].val.value = 0
s.task_queue.deq.rdy.value = 0
s.idle_queue.deq.rdy.value = 0
if s.init:
s.map_req[s.init_count].msg.data.value = s.reference
s.map_req[s.init_count].msg.type_.value = 1
s.map_req[s.init_count].val.value = 1
s.idle_queue.enq.msg.value = s.init_count
s.idle_queue.enq.val.value = 1
else:
# assign task to mapper if task queue is ready to dequeue
# idle queue is ready to dequeue and mapper is ready to take request
if (s.task_queue.deq.val and s.idle_queue.deq.val
and s.map_req[s.idle_queue.deq.msg].rdy):
s.map_req[s.idle_queue.deq.
msg].msg.data.value = s.task_queue.deq.msg[0:8]
s.map_req[s.idle_queue.deq.msg].msg.type_.value = 0
s.map_req[s.idle_queue.deq.msg].val.value = 1
s.task_queue.deq.rdy.value = 1
s.idle_queue.deq.rdy.value = 1
#---------------------------------------------------------------------
# Send Mapper Resp to Reducer Combinational Logic
#---------------------------------------------------------------------
@s.combinational
def reducer():
# initialize mapper and reducer handshake signals
for i in xrange(mapper_num):
s.map_resp[i].rdy.value = 0
for i in xrange(reducer_num):
s.red_req[i].val.value = 0
#s.idle_queue.enq.val.value = 0
# get the mapper response, assign the response to reducer
if (s.mapper_done):
# Check each mapper response, add it to idle queue, send its response
# to Reducer, mark its response ready
for i in xrange(mapper_num):
if (s.map_resp[i].val):
if ~s.init:
if s.idle_queue.enq.rdy:
s.idle_queue.enq.msg.value = i
s.idle_queue.enq.val.value = 1
if s.red_req[0].rdy:
if s.end and s.num_task_queue == 2:
s.red_req[0].msg.data.value = s.map_resp[
i].msg.data
s.red_req[0].msg.type_.value = 1
s.red_req[0].val.value = 1
s.done.value = 1
else:
s.red_req[0].msg.data.value = s.map_resp[
i].msg.data
s.red_req[0].msg.type_.value = 0
s.red_req[0].val.value = 1
s.map_resp[i].rdy.value = 1
break
#---------------------------------------------------------------------
# Task State Transition Logic
#---------------------------------------------------------------------
@s.combinational
def state_transitions():
curr_state = s.state.out
next_state = s.state.out
if (curr_state == s.STATE_IDLE):
if (s.in_.val):
next_state = s.STATE_SOURCE
if (curr_state == s.STATE_SOURCE):
if (s.go):
next_state = s.STATE_INIT
elif (s.done and s.red_resp[0].val):
next_state = s.STATE_IDLE
if (curr_state == s.STATE_INIT):
if (s.init_count == mapper_num - 1):
next_state = s.STATE_START
if (curr_state == s.STATE_START):
if (s.input_count == s.size - 1):
next_state = s.STATE_END
if (curr_state == s.STATE_END):
if (s.done):
next_state = s.STATE_SOURCE
s.state.in_.value = next_state
#---------------------------------------------------------------------
# Task State Output Logic
#---------------------------------------------------------------------
@s.combinational
def state_outputs():
current_state = s.state.out
s.gmem_req.val.value = 0
s.gmem_resp.rdy.value = 0
s.in_.rdy.value = 0
s.out.val.value = 0
s.task_queue.enq.val.value = 0
# In IDLE state
if (current_state == s.STATE_IDLE):
s.init_count.value = 0
s.input_count.value = 0
s.end.value = 0
s.go.value = 0
s.init.value = 0
s.done.value = 0
if s.in_.val:
if (s.in_.msg.addr == 1):
s.base.value = s.in_.msg.data
s.in_.rdy.value = 1
s.out.msg.type_.value = WordcountReqMsg.TYPE_WRITE
s.out.msg.data.value = 0
s.out.val.value = 1
#In SOURCE state
if (current_state == s.STATE_SOURCE):
if (s.in_.val and s.out.rdy):
if (s.in_.msg.type_ == WordcountReqMsg.TYPE_WRITE):
if (s.in_.msg.addr == 0):
s.go.value = 1
elif (s.in_.msg.addr == 2):
s.size.value = s.in_.msg.data
elif (s.in_.msg.addr == 3):
s.reference.value = s.in_.msg.data
# Send xcel response message
s.in_.rdy.value = 1
s.out.msg.type_.value = WordcountReqMsg.TYPE_WRITE
s.out.msg.data.value = 0
s.out.val.value = 1
elif (s.in_.msg.type_ == WordcountReqMsg.TYPE_READ):
if (s.done and s.red_resp[0].val):
s.out.msg.type_.value = WordcountReqMsg.TYPE_READ
s.out.msg.data.value = s.red_resp[0].msg.data
s.red_resp[0].rdy.value = 1
s.in_.rdy.value = 1
s.out.val.value = 1
# In INIT state
if (current_state == s.STATE_INIT):
s.init.value = 1
s.go.value = 0
# at the last 2 cycle of init, send read req to global memory
if s.init_count == mapper_num - 2:
if s.gmem_req.rdy:
s.gmem_req.msg.addr.value = s.base + (4 *
s.input_count)
s.gmem_req.msg.type_.value = TYPE_READ
s.gmem_req.val.value = 1
# at the last cycle of init, receive read resp to global memory, put it in task queue
# send another read req to global memory
if s.init_count == mapper_num - 1:
if s.gmem_resp.val and s.gmem_req.rdy:
s.task_queue.enq.msg.value = s.gmem_resp.msg
s.task_queue.enq.val.value = 1
s.gmem_resp.rdy.value = 1
s.gmem_req.msg.addr.value = s.base + (4 *
s.input_count)
s.gmem_req.msg.type_.value = TYPE_READ
s.gmem_req.val.value = 1
# In START state
if (current_state == s.STATE_START):
s.init.value = 0
if s.gmem_resp.val and s.gmem_req.rdy:
s.task_queue.enq.msg.value = s.gmem_resp.msg
s.task_queue.enq.val.value = 1
s.gmem_resp.rdy.value = 1
s.gmem_req.msg.addr.value = s.base + (4 * s.input_count)
s.gmem_req.msg.type_.value = TYPE_READ
s.gmem_req.val.value = 1
# In END state
if (current_state == s.STATE_END):
if s.gmem_resp.val:
s.task_queue.enq.msg.value = s.gmem_resp.msg
s.task_queue.enq.val.value = 1
s.gmem_resp.rdy.value = 1
s.end.value = 1
def mk_resp_msg(data, type):
msg = MapperRespMsg()
msg.data = data
msg.type_ = type
return msg
def mk_resp_msg(data, type):
msg = MapperRespMsg()
msg.data = data
msg.type_ = type
return msg
def mk_resp_msg( data, type, digit ): msg = MapperRespMsg() msg.data = data msg.type_ = type msg.digit = digit return msg