def OnSaveProfile(self, e):
dlg=wx.FileDialog(self, _("Select profile file to save"), os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_SAVE)
dlg.SetWildcard("ini files (*.ini)|*.ini")
if dlg.ShowModal() == wx.ID_OK:
profileFile = dlg.GetPath()
profile.saveProfile(profileFile)
dlg.Destroy()
def OnLoadProfile(self, e):
dlg=wx.FileDialog(self, _("Select profile file to load"), os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
dlg.SetWildcard("ini files (*.ini)|*.ini")
if dlg.ShowModal() == wx.ID_OK:
profileFile = dlg.GetPath()
profile.loadProfile(profileFile)
self.updateProfileToAllControls()
# Update the Profile MRU
self.addToProfileMRU(profileFile)
dlg.Destroy()
def OnSaveProfile(self, e):
dlg = wx.FileDialog(self,
_("Select profile file to save"),
os.path.split(
profile.getPreference('lastFile'))[0],
style=wx.FD_SAVE)
dlg.SetWildcard("ini files (*.ini)|*.ini")
if dlg.ShowModal() == wx.ID_OK:
profileFile = dlg.GetPath()
profile.saveProfile(profileFile)
dlg.Destroy()
def ShowLoadDialog(self, button):
dlg=wx.FileDialog(self, _("Open 3D model"), os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST|wx.FD_MULTIPLE)
dlg.SetWildcard("2D file (*.dxf;*.svg)|*.dxf;*.svg")
if dlg.ShowModal() != wx.ID_OK:
dlg.Destroy()
return
filenames = dlg.GetPaths()
dlg.Destroy()
if len(filenames) < 1:
return False
profile.putPreference('lastFile', filenames[0])
self.loadFiles(filenames)
def OnLoadProfile(self, e):
dlg = wx.FileDialog(self,
_("Select profile file to load"),
os.path.split(
profile.getPreference('lastFile'))[0],
style=wx.FD_OPEN | wx.FD_FILE_MUST_EXIST)
dlg.SetWildcard("ini files (*.ini)|*.ini")
if dlg.ShowModal() == wx.ID_OK:
profileFile = dlg.GetPath()
profile.loadProfile(profileFile)
self.updateProfileToAllControls()
# Update the Profile MRU
self.addToProfileMRU(profileFile)
dlg.Destroy()
def ShowSaveDialog(self, button):
if len(self._scene.engine._gcode) < 1:
return
dlg=wx.FileDialog(self, _("Save GCode"), os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_SAVE|wx.FD_OVERWRITE_PROMPT)
dlg.SetWildcard("GCode (*.gcode)|*.gcode|*.g|*.G")
if dlg.ShowModal() != wx.ID_OK:
dlg.Destroy()
return
filename = dlg.GetPath()
dlg.Destroy()
f = open(filename, "w")
for line in self._scene.engine._gcode:
f.write(line)
f.write('\n')
f.close()
def afterSplashCallback(self):
#These imports take most of the time and thus should be done after showing the splashscreen
from NK.gui import mainWindow
from NK.util import profile
from NK.util import resources
resources.setupLocalization(profile.getPreference('language')) # it's important to set up localization at very beginning to install _
self.mainWindow = mainWindow.mainWindow()
if self.splash is not None:
self.splash.Show(False)
self.mainWindow.Show()
self.mainWindow.OnDropFiles(self.loadFiles)
setFullScreenCapable(self.mainWindow)
def OnLoadProfileFromGcode(self, e):
dlg=wx.FileDialog(self, _("Select gcode file to load profile from"), os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
dlg.SetWildcard("gcode files (*.gcode)|*.gcode;*.g")
if dlg.ShowModal() == wx.ID_OK:
gcodeFile = dlg.GetPath()
f = open(gcodeFile, 'r')
hasProfile = False
for line in f:
if line.startswith(';CURA_PROFILE_STRING:'):
profile.setProfileFromString(line[line.find(':')+1:].strip())
hasProfile = True
if hasProfile:
self.updateProfileToAllControls()
else:
wx.MessageBox(_("No profile found in GCode file.\nThis feature only works with GCode files made by Cura 12.07 or newer."), _("Profile load error"), wx.OK | wx.ICON_INFORMATION)
dlg.Destroy()
def afterSplashCallback(self):
#These imports take most of the time and thus should be done after showing the splashscreen
from NK.gui import mainWindow
from NK.util import profile
from NK.util import resources
resources.setupLocalization(
profile.getPreference('language')
) # it's important to set up localization at very beginning to install _
self.mainWindow = mainWindow.mainWindow()
if self.splash is not None:
self.splash.Show(False)
self.mainWindow.Show()
self.mainWindow.OnDropFiles(self.loadFiles)
setFullScreenCapable(self.mainWindow)
def OnLoadProfileFromGcode(self, e):
dlg = wx.FileDialog(self,
_("Select gcode file to load profile from"),
os.path.split(
profile.getPreference('lastFile'))[0],
style=wx.FD_OPEN | wx.FD_FILE_MUST_EXIST)
dlg.SetWildcard("gcode files (*.gcode)|*.gcode;*.g")
if dlg.ShowModal() == wx.ID_OK:
gcodeFile = dlg.GetPath()
f = open(gcodeFile, 'r')
hasProfile = False
for line in f:
if line.startswith(';CURA_PROFILE_STRING:'):
profile.setProfileFromString(line[line.find(':') +
1:].strip())
hasProfile = True
if hasProfile:
self.updateProfileToAllControls()
else:
wx.MessageBox(
_("No profile found in GCode file.\nThis feature only works with GCode files made by Cura 12.07 or newer."
), _("Profile load error"), wx.OK | wx.ICON_INFORMATION)
dlg.Destroy()
def OnTrotecLaser(self, e):
import numpy
if len(self.scene._scene.engine.resultPoints) < 1:
return
dlg=wx.FileDialog(self, "Save Trotec laser file", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_SAVE|wx.FD_OVERWRITE_PROMPT)
dlg.SetWildcard("Trotec (*.tsf)|*.tsf")
if dlg.ShowModal() != wx.ID_OK:
dlg.Destroy()
return
filename = dlg.GetPath()
dlg.Destroy()
cutPolygons = []
engravePolygons = []
cutZ = -profile.getProfileSettingFloat('cut_depth')
engraveZ = -profile.getProfileSettingFloat('engrave_depth')
curPath = None
for p in self.scene._scene.engine.resultPoints:
if abs(p[2] - cutZ) < 0.01:
if curPath is None:
curPath = [p]
cutPolygons.append(curPath)
else:
curPath.append(p)
elif abs(p[2] - engraveZ) < 0.01:
if curPath is None:
curPath = [p]
engravePolygons.append(curPath)
else:
curPath.append(p)
else:
curPath = None
minX = 1000000
maxX =-1000000
minY = 1000000
maxY =-1000000
for poly in cutPolygons:
for p in poly:
if p[0] < minX:
minX = p[0]
if p[1] < minY:
minY = p[1]
if p[0] > maxX:
maxX = p[0]
if p[1] > maxY:
maxY = p[1]
for poly in engravePolygons:
for p in poly:
if p[0] < minX:
minX = p[0]
if p[1] < minY:
minY = p[1]
if p[0] > maxX:
maxX = p[0]
if p[1] > maxY:
maxY = p[1]
dpi = 500.0
f = open(filename, "wb")
f.write('<!-- Version: 9.4.2.1034>\r\n')
f.write('<!-- PrintingApplication: ps2tsf.exe>\r\n')
f.write('<BegGroup: Header>\r\n')
f.write('<ProcessMode: Standard>\r\n')
f.write('<Size: %.2f;%.2f>\r\n' % (maxX - minX+1.0, maxY - minY+1.0))
f.write('<MaterialGroup: Rubber>\r\n')
f.write('<MaterialName: 2.3 mm>\r\n')
name = os.path.basename(filename)
name = os.path.splitext(name)[0]
f.write('<JobName: %s.eps>\r\n' % (name))
f.write('<JobNumber: 1>\r\n')
f.write('<Resolution: %i>\r\n' % (dpi))
f.write('<Cutline: none>\r\n')
f.write('<EndGroup: Header>\r\n')
f.write('<BegGroup: Bitmap>\r\n')
bmpMagic = """eJztyTEKwkAURdFvJzbBHVimTG3CIAMpg4UuwiaQFWTlwjgDVu5AOOdxqzc9nnndrpdhHFJe9tc5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="""
import base64
import zlib
f.write(zlib.decompress(base64.decodestring(bmpMagic)))
f.write('<EndGroup: Bitmap>\r\n')
f.write('<BegGroup: DrawCommands>\r\n')
for poly in engravePolygons:
f.write('<DrawPolygon: %i;0;0;255' % (len(poly)))
for p in poly:
f.write(';%i;%i' % (p[0]/25.4*dpi, p[1]/25.4*dpi))
f.write('>\r\n')
for poly in cutPolygons:
f.write('<DrawPolygon: %i;255;0;0' % (len(poly)))
for p in poly:
f.write(';%i;%i' % (p[0]/25.4*dpi, p[1]/25.4*dpi))
f.write('>\r\n')
f.write('<EndGroup: DrawCommands>\r\n')
f.close()
def __init__(self):
super(mainWindow, self).__init__(None, title='NinjaKittens')
wx.EVT_CLOSE(self, self.OnClose)
# allow dropping any file, restrict later
self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles))
self.normalModeOnlyItems = []
mruFile = os.path.join(profile.getBasePath(), 'mru_filelist.ini')
self.config = wx.FileConfig(appName="NinjaKittens",
localFilename=mruFile,
style=wx.CONFIG_USE_LOCAL_FILE)
self.ID_MRU_MODEL1, self.ID_MRU_MODEL2, self.ID_MRU_MODEL3, self.ID_MRU_MODEL4, self.ID_MRU_MODEL5, self.ID_MRU_MODEL6, self.ID_MRU_MODEL7, self.ID_MRU_MODEL8, self.ID_MRU_MODEL9, self.ID_MRU_MODEL10 = [wx.NewId() for line in xrange(10)]
self.modelFileHistory = wx.FileHistory(10, self.ID_MRU_MODEL1)
self.config.SetPath("/ModelMRU")
self.modelFileHistory.Load(self.config)
self.ID_MRU_PROFILE1, self.ID_MRU_PROFILE2, self.ID_MRU_PROFILE3, self.ID_MRU_PROFILE4, self.ID_MRU_PROFILE5, self.ID_MRU_PROFILE6, self.ID_MRU_PROFILE7, self.ID_MRU_PROFILE8, self.ID_MRU_PROFILE9, self.ID_MRU_PROFILE10 = [wx.NewId() for line in xrange(10)]
self.profileFileHistory = wx.FileHistory(10, self.ID_MRU_PROFILE1)
self.config.SetPath("/ProfileMRU")
self.profileFileHistory.Load(self.config)
self.menubar = wx.MenuBar()
self.fileMenu = wx.Menu()
i = self.fileMenu.Append(-1, _("Load model file...\tCTRL+L"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showLoadModel(), i)
i = self.fileMenu.Append(-1, _("Save model...\tCTRL+S"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveModel(), i)
i = self.fileMenu.Append(-1, _("Clear platform"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnDeleteAll(e), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Print...\tCTRL+P"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showPrintWindow(), i)
i = self.fileMenu.Append(-1, _("Save GCode..."))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveGCode(), i)
i = self.fileMenu.Append(-1, _("Save Trotec laser file (*.tsf)..."))
self.Bind(wx.EVT_MENU, self.OnTrotecLaser, i)
i = self.fileMenu.Append(-1, _("Show slice engine log..."))
self.Bind(wx.EVT_MENU, lambda e: self.scene._showSliceLog(), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Open Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
i = self.fileMenu.Append(-1, _("Save Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
i = self.fileMenu.Append(-1, _("Load Profile from GCode..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Reset Profile to default"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnResetProfile, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Preferences...\tCTRL+,"))
self.Bind(wx.EVT_MENU, self.OnPreferences, i)
i = self.fileMenu.Append(-1, _("Machine settings..."))
self.Bind(wx.EVT_MENU, self.OnMachineSettings, i)
self.fileMenu.AppendSeparator()
# Model MRU list
modelHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), '&' + _("Recent Model Files"), modelHistoryMenu)
self.modelFileHistory.UseMenu(modelHistoryMenu)
self.modelFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE, self.OnModelMRU, id=self.ID_MRU_MODEL1, id2=self.ID_MRU_MODEL10)
# Profle MRU list
profileHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), _("Recent Profile Files"), profileHistoryMenu)
self.profileFileHistory.UseMenu(profileHistoryMenu)
self.profileFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE, self.OnProfileMRU, id=self.ID_MRU_PROFILE1, id2=self.ID_MRU_PROFILE10)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(wx.ID_EXIT, _("Quit"))
self.Bind(wx.EVT_MENU, self.OnQuit, i)
self.menubar.Append(self.fileMenu, '&' + _("File"))
toolsMenu = wx.Menu()
i = toolsMenu.Append(-1, _("Copy profile to clipboard"))
self.Bind(wx.EVT_MENU, self.onCopyProfileClipboard,i)
self.menubar.Append(toolsMenu, _("Tools"))
#Machine menu for machine configuration/tooling
self.machineMenu = wx.Menu()
self.updateMachineMenu()
self.menubar.Append(self.machineMenu, _("Machine"))
#Preset menu for quickly switching pre-made profiles
self.presetMenu = wx.Menu()
self.updatePresetMenu()
self.menubar.Append(self.presetMenu, _("Presets"))
expertMenu = wx.Menu()
i = expertMenu.Append(-1, _("Open expert settings...\tCTRL+E"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
self.menubar.Append(expertMenu, _("Expert"))
helpMenu = wx.Menu()
i = helpMenu.Append(-1, _("Online documentation..."))
self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('http://daid.github.com/NinjaKittens'), i)
i = helpMenu.Append(-1, _("Report a problem..."))
self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://github.com/daid/NinjaKittens/issues'), i)
i = helpMenu.Append(-1, _("About NinjaKittens..."))
self.Bind(wx.EVT_MENU, self.OnAbout, i)
self.menubar.Append(helpMenu, _("Help"))
self.SetMenuBar(self.menubar)
self.splitter = wx.SplitterWindow(self, style = wx.SP_3D | wx.SP_LIVE_UPDATE)
self.leftPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.rightPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.splitter.Bind(wx.EVT_SPLITTER_DCLICK, lambda evt: evt.Veto())
##Gui components##
self.normalSettingsPanel = normalSettingsPanel(self.leftPane, lambda : self.scene.sceneUpdated())
self.leftSizer = wx.BoxSizer(wx.VERTICAL)
self.leftSizer.Add(self.normalSettingsPanel, 1, wx.EXPAND)
self.leftPane.SetSizer(self.leftSizer)
#Preview window
self.scene = sceneView.SceneView(self.rightPane)
#Main sizer, to position the preview window, buttons and tab control
sizer = wx.BoxSizer()
self.rightPane.SetSizer(sizer)
sizer.Add(self.scene, 1, flag=wx.EXPAND)
# Main window sizer
sizer = wx.BoxSizer(wx.VERTICAL)
self.SetSizer(sizer)
sizer.Add(self.splitter, 1, wx.EXPAND)
sizer.Layout()
self.sizer = sizer
self.updateProfileToAllControls()
self.SetBackgroundColour(self.normalSettingsPanel.GetBackgroundColour())
# Set default window size & position
self.SetSize((wx.Display().GetClientArea().GetWidth()/2,wx.Display().GetClientArea().GetHeight()/2))
self.Centre()
#Timer set; used to check if profile is on the clipboard
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.onTimer)
self.timer.Start(1000)
self.lastTriedClipboard = profile.getProfileString()
# Restore the window position, size & state from the preferences file
try:
if profile.getPreference('window_maximized') == 'True':
self.Maximize(True)
else:
posx = int(profile.getPreference('window_pos_x'))
posy = int(profile.getPreference('window_pos_y'))
width = int(profile.getPreference('window_width'))
height = int(profile.getPreference('window_height'))
if posx > 0 or posy > 0:
self.SetPosition((posx,posy))
if width > 0 and height > 0:
self.SetSize((width,height))
self.normalSashPos = int(profile.getPreference('window_normal_sash'))
except:
self.normalSashPos = 0
self.Maximize(True)
if self.normalSashPos < self.normalSettingsPanel.printPanel.GetBestSize()[0] + 5:
self.normalSashPos = self.normalSettingsPanel.printPanel.GetBestSize()[0] + 5
self.splitter.SplitVertically(self.leftPane, self.rightPane, self.normalSashPos)
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.Centre()
if wx.Display.GetFromPoint((self.GetPositionTuple()[0] + self.GetSizeTuple()[1], self.GetPositionTuple()[1] + self.GetSizeTuple()[1])) < 0:
self.Centre()
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.SetSize((800,600))
self.Centre()
self.scene.SetFocus()
def OnTrotecLaser(self, e):
import numpy
if len(self.scene._scene.engine.resultPoints) < 1:
return
dlg = wx.FileDialog(self,
"Save Trotec laser file",
os.path.split(
profile.getPreference('lastFile'))[0],
style=wx.FD_SAVE | wx.FD_OVERWRITE_PROMPT)
dlg.SetWildcard("Trotec (*.tsf)|*.tsf")
if dlg.ShowModal() != wx.ID_OK:
dlg.Destroy()
return
filename = dlg.GetPath()
dlg.Destroy()
cutPolygons = []
engravePolygons = []
cutZ = -profile.getProfileSettingFloat('cut_depth')
engraveZ = -profile.getProfileSettingFloat('engrave_depth')
curPath = None
for p in self.scene._scene.engine.resultPoints:
if abs(p[2] - cutZ) < 0.01:
if curPath is None:
curPath = [p]
cutPolygons.append(curPath)
else:
curPath.append(p)
elif abs(p[2] - engraveZ) < 0.01:
if curPath is None:
curPath = [p]
engravePolygons.append(curPath)
else:
curPath.append(p)
else:
curPath = None
minX = 1000000
maxX = -1000000
minY = 1000000
maxY = -1000000
for poly in cutPolygons:
for p in poly:
if p[0] < minX:
minX = p[0]
if p[1] < minY:
minY = p[1]
if p[0] > maxX:
maxX = p[0]
if p[1] > maxY:
maxY = p[1]
for poly in engravePolygons:
for p in poly:
if p[0] < minX:
minX = p[0]
if p[1] < minY:
minY = p[1]
if p[0] > maxX:
maxX = p[0]
if p[1] > maxY:
maxY = p[1]
dpi = 500.0
f = open(filename, "wb")
f.write('<!-- Version: 9.4.2.1034>\r\n')
f.write('<!-- PrintingApplication: ps2tsf.exe>\r\n')
f.write('<BegGroup: Header>\r\n')
f.write('<ProcessMode: Standard>\r\n')
f.write('<Size: %.2f;%.2f>\r\n' %
(maxX - minX + 1.0, maxY - minY + 1.0))
f.write('<MaterialGroup: Rubber>\r\n')
f.write('<MaterialName: 2.3 mm>\r\n')
name = os.path.basename(filename)
name = os.path.splitext(name)[0]
f.write('<JobName: %s.eps>\r\n' % (name))
f.write('<JobNumber: 1>\r\n')
f.write('<Resolution: %i>\r\n' % (dpi))
f.write('<Cutline: none>\r\n')
f.write('<EndGroup: Header>\r\n')
f.write('<BegGroup: Bitmap>\r\n')
bmpMagic = """eJztyTEKwkAURdFvJzbBHVimTG3CIAMpg4UuwiaQFWTlwjgDVu5AOOdxqzc9nnndrpdhHFJe9tc5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="""
import base64
import zlib
f.write(zlib.decompress(base64.decodestring(bmpMagic)))
f.write('<EndGroup: Bitmap>\r\n')
f.write('<BegGroup: DrawCommands>\r\n')
for poly in engravePolygons:
f.write('<DrawPolygon: %i;0;0;255' % (len(poly)))
for p in poly:
f.write(';%i;%i' % (p[0] / 25.4 * dpi, p[1] / 25.4 * dpi))
f.write('>\r\n')
for poly in cutPolygons:
f.write('<DrawPolygon: %i;255;0;0' % (len(poly)))
for p in poly:
f.write(';%i;%i' % (p[0] / 25.4 * dpi, p[1] / 25.4 * dpi))
f.write('>\r\n')
f.write('<EndGroup: DrawCommands>\r\n')
f.close()
def __init__(self):
super(mainWindow, self).__init__(None, title='NinjaKittens')
wx.EVT_CLOSE(self, self.OnClose)
# allow dropping any file, restrict later
self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles))
self.normalModeOnlyItems = []
mruFile = os.path.join(profile.getBasePath(), 'mru_filelist.ini')
self.config = wx.FileConfig(appName="NinjaKittens",
localFilename=mruFile,
style=wx.CONFIG_USE_LOCAL_FILE)
self.ID_MRU_MODEL1, self.ID_MRU_MODEL2, self.ID_MRU_MODEL3, self.ID_MRU_MODEL4, self.ID_MRU_MODEL5, self.ID_MRU_MODEL6, self.ID_MRU_MODEL7, self.ID_MRU_MODEL8, self.ID_MRU_MODEL9, self.ID_MRU_MODEL10 = [
wx.NewId() for line in xrange(10)
]
self.modelFileHistory = wx.FileHistory(10, self.ID_MRU_MODEL1)
self.config.SetPath("/ModelMRU")
self.modelFileHistory.Load(self.config)
self.ID_MRU_PROFILE1, self.ID_MRU_PROFILE2, self.ID_MRU_PROFILE3, self.ID_MRU_PROFILE4, self.ID_MRU_PROFILE5, self.ID_MRU_PROFILE6, self.ID_MRU_PROFILE7, self.ID_MRU_PROFILE8, self.ID_MRU_PROFILE9, self.ID_MRU_PROFILE10 = [
wx.NewId() for line in xrange(10)
]
self.profileFileHistory = wx.FileHistory(10, self.ID_MRU_PROFILE1)
self.config.SetPath("/ProfileMRU")
self.profileFileHistory.Load(self.config)
self.menubar = wx.MenuBar()
self.fileMenu = wx.Menu()
i = self.fileMenu.Append(-1, _("Load model file...\tCTRL+L"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showLoadModel(), i)
i = self.fileMenu.Append(-1, _("Save model...\tCTRL+S"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveModel(), i)
i = self.fileMenu.Append(-1, _("Clear platform"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnDeleteAll(e), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Print...\tCTRL+P"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showPrintWindow(), i)
i = self.fileMenu.Append(-1, _("Save GCode..."))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveGCode(), i)
i = self.fileMenu.Append(-1, _("Save Trotec laser file (*.tsf)..."))
self.Bind(wx.EVT_MENU, self.OnTrotecLaser, i)
i = self.fileMenu.Append(-1, _("Show slice engine log..."))
self.Bind(wx.EVT_MENU, lambda e: self.scene._showSliceLog(), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Open Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
i = self.fileMenu.Append(-1, _("Save Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
i = self.fileMenu.Append(-1, _("Load Profile from GCode..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Reset Profile to default"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnResetProfile, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Preferences...\tCTRL+,"))
self.Bind(wx.EVT_MENU, self.OnPreferences, i)
i = self.fileMenu.Append(-1, _("Machine settings..."))
self.Bind(wx.EVT_MENU, self.OnMachineSettings, i)
self.fileMenu.AppendSeparator()
# Model MRU list
modelHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), '&' + _("Recent Model Files"),
modelHistoryMenu)
self.modelFileHistory.UseMenu(modelHistoryMenu)
self.modelFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE,
self.OnModelMRU,
id=self.ID_MRU_MODEL1,
id2=self.ID_MRU_MODEL10)
# Profle MRU list
profileHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), _("Recent Profile Files"),
profileHistoryMenu)
self.profileFileHistory.UseMenu(profileHistoryMenu)
self.profileFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE,
self.OnProfileMRU,
id=self.ID_MRU_PROFILE1,
id2=self.ID_MRU_PROFILE10)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(wx.ID_EXIT, _("Quit"))
self.Bind(wx.EVT_MENU, self.OnQuit, i)
self.menubar.Append(self.fileMenu, '&' + _("File"))
toolsMenu = wx.Menu()
i = toolsMenu.Append(-1, _("Copy profile to clipboard"))
self.Bind(wx.EVT_MENU, self.onCopyProfileClipboard, i)
self.menubar.Append(toolsMenu, _("Tools"))
#Machine menu for machine configuration/tooling
self.machineMenu = wx.Menu()
self.updateMachineMenu()
self.menubar.Append(self.machineMenu, _("Machine"))
#Preset menu for quickly switching pre-made profiles
self.presetMenu = wx.Menu()
self.updatePresetMenu()
self.menubar.Append(self.presetMenu, _("Presets"))
expertMenu = wx.Menu()
i = expertMenu.Append(-1, _("Open expert settings...\tCTRL+E"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
self.menubar.Append(expertMenu, _("Expert"))
helpMenu = wx.Menu()
i = helpMenu.Append(-1, _("Online documentation..."))
self.Bind(
wx.EVT_MENU,
lambda e: webbrowser.open('http://daid.github.com/NinjaKittens'),
i)
i = helpMenu.Append(-1, _("Report a problem..."))
self.Bind(
wx.EVT_MENU, lambda e: webbrowser.open(
'https://github.com/daid/NinjaKittens/issues'), i)
i = helpMenu.Append(-1, _("About NinjaKittens..."))
self.Bind(wx.EVT_MENU, self.OnAbout, i)
self.menubar.Append(helpMenu, _("Help"))
self.SetMenuBar(self.menubar)
self.splitter = wx.SplitterWindow(self,
style=wx.SP_3D | wx.SP_LIVE_UPDATE)
self.leftPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.rightPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.splitter.Bind(wx.EVT_SPLITTER_DCLICK, lambda evt: evt.Veto())
##Gui components##
self.normalSettingsPanel = normalSettingsPanel(
self.leftPane, lambda: self.scene.sceneUpdated())
self.leftSizer = wx.BoxSizer(wx.VERTICAL)
self.leftSizer.Add(self.normalSettingsPanel, 1, wx.EXPAND)
self.leftPane.SetSizer(self.leftSizer)
#Preview window
self.scene = sceneView.SceneView(self.rightPane)
#Main sizer, to position the preview window, buttons and tab control
sizer = wx.BoxSizer()
self.rightPane.SetSizer(sizer)
sizer.Add(self.scene, 1, flag=wx.EXPAND)
# Main window sizer
sizer = wx.BoxSizer(wx.VERTICAL)
self.SetSizer(sizer)
sizer.Add(self.splitter, 1, wx.EXPAND)
sizer.Layout()
self.sizer = sizer
self.updateProfileToAllControls()
self.SetBackgroundColour(
self.normalSettingsPanel.GetBackgroundColour())
# Set default window size & position
self.SetSize((wx.Display().GetClientArea().GetWidth() / 2,
wx.Display().GetClientArea().GetHeight() / 2))
self.Centre()
#Timer set; used to check if profile is on the clipboard
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.onTimer)
self.timer.Start(1000)
self.lastTriedClipboard = profile.getProfileString()
# Restore the window position, size & state from the preferences file
try:
if profile.getPreference('window_maximized') == 'True':
self.Maximize(True)
else:
posx = int(profile.getPreference('window_pos_x'))
posy = int(profile.getPreference('window_pos_y'))
width = int(profile.getPreference('window_width'))
height = int(profile.getPreference('window_height'))
if posx > 0 or posy > 0:
self.SetPosition((posx, posy))
if width > 0 and height > 0:
self.SetSize((width, height))
self.normalSashPos = int(
profile.getPreference('window_normal_sash'))
except:
self.normalSashPos = 0
self.Maximize(True)
if self.normalSashPos < self.normalSettingsPanel.printPanel.GetBestSize(
)[0] + 5:
self.normalSashPos = self.normalSettingsPanel.printPanel.GetBestSize(
)[0] + 5
self.splitter.SplitVertically(self.leftPane, self.rightPane,
self.normalSashPos)
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.Centre()
if wx.Display.GetFromPoint(
(self.GetPositionTuple()[0] + self.GetSizeTuple()[1],
self.GetPositionTuple()[1] + self.GetSizeTuple()[1])) < 0:
self.Centre()
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.SetSize((800, 600))
self.Centre()
self.scene.SetFocus()