def write_edge(points_edge, topo_edge):
"""
Method to recreate an Edge associated to a geometric curve
after the modification of its points.
:param points_edge: the deformed points array.
:param topo_edge: the Edge to be modified
:return: Edge (Shape)
:rtype: TopoDS_Edge
"""
# convert Edge to Geom B-spline Curve
nurbs_converter = BRepBuilderAPI_NurbsConvert(topo_edge)
nurbs_converter.Perform(topo_edge)
nurbs_curve = nurbs_converter.Shape()
topo_curve = topods_Edge(nurbs_curve)
h_geomcurve = BRep_Tool.Curve(topo_curve)[0]
h_bcurve = geomconvert_CurveToBSplineCurve(h_geomcurve)
bspline_edge_curve = h_bcurve
# Edge geometric properties
nb_cpt = bspline_edge_curve.NbPoles()
# check consistency
if points_edge.shape[0] != nb_cpt:
raise ValueError("Input control points do not have not have the "
"same number as the geometric edge!")
else:
for i in range(1, nb_cpt + 1):
cpt = points_edge[i - 1]
bspline_edge_curve.SetPole(i, gp_Pnt(cpt[0], cpt[1], cpt[2]))
new_edge = BRepBuilderAPI_MakeEdge(bspline_edge_curve)
return new_edge.Edge()
class OccNURBSFromShape:
def __init__(self, shape: TopoDS_Shape):
self.mknurbs = BRepBuilderAPI_NurbsConvert(shape)
self.shape = shape
#self.mknurbs.Perform(shape) # Perform the conversion of the shape to a NURBS rep (curve or surface?)
def Shape(self):
return self.mknurbs.Shape()
def IsDone(self) -> bool:
return self.mknurbs.IsDone()
def _bspline_curve_from_wire(self, wire):
"""
Private method that takes a TopoDS_Wire and transforms it into a
Bspline_Curve.
:param TopoDS_Wire wire: the TopoDS_Face to be converted
:rtype: Geom_BSplineSurface
"""
if not isinstance(wire, TopoDS_Wire):
raise TypeError("wire must be a TopoDS_Wire")
# joining all the wire edges in a single curve here
# composite curve builder (can only join Bspline curves)
composite_curve_builder = GeomConvert_CompCurveToBSplineCurve()
# iterator to edges in the TopoDS_Wire
edge_explorer = TopExp_Explorer(wire, TopAbs_EDGE)
while edge_explorer.More():
# getting the edge from the iterator
edge = topods_Edge(edge_explorer.Current())
# edge can be joined only if it is not degenerated (zero length)
if BRep_Tool.Degenerated(edge):
edge_explorer.Next()
continue
# the edge must be converted to Nurbs edge
nurbs_converter = BRepBuilderAPI_NurbsConvert(edge)
nurbs_converter.Perform(edge)
nurbs_edge = topods_Edge(nurbs_converter.Shape())
# here we extract the underlying curve from the Nurbs edge
nurbs_curve = BRep_Tool_Curve(nurbs_edge)[0]
# we convert the Nurbs curve to Bspline curve
bspline_curve = geomconvert_CurveToBSplineCurve(nurbs_curve)
# we can now add the Bspline curve to the composite wire curve
composite_curve_builder.Add(bspline_curve, self.tolerance)
edge_explorer.Next()
# GeomCurve obtained by the builder after edges are joined
comp_curve = composite_curve_builder.BSplineCurve()
return comp_curve
def to_meshes(self, u=16, v=16):
"""Convert the faces of the BRep shape to meshes.
Parameters
----------
u : int, optional
The number of mesh faces in the U direction of the underlying surface geometry of every face of the BRep.
v : int, optional
The number of mesh faces in the V direction of the underlying surface geometry of every face of the BRep.
Returns
-------
list[:class:`~compas.datastructures.Mesh`]
"""
converter = BRepBuilderAPI_NurbsConvert(self.shape, False)
brep = BRep()
brep.shape = converter.Shape()
meshes = []
for face in brep.faces:
srf = OCCNurbsSurface.from_face(face.face)
mesh = srf.to_vizmesh(u, v)
meshes.append(mesh)
return meshes
def _bspline_surface_from_face(self, face):
"""
Private method that takes a TopoDS_Face and transforms it into a
Bspline_Surface.
:param TopoDS_Face face: the TopoDS_Face to be converted
:rtype: Geom_BSplineSurface
"""
if not isinstance(face, TopoDS_Face):
raise TypeError("face must be a TopoDS_Face")
# TopoDS_Face converted to Nurbs
nurbs_face = topods_Face(BRepBuilderAPI_NurbsConvert(face).Shape())
# GeomSurface obtained from Nurbs face
surface = BRep_Tool.Surface(nurbs_face)
# surface is now further converted to a bspline surface
bspline_surface = geomconvert_SurfaceToBSplineSurface(surface)
return bspline_surface
<head>
<meta name='generator' content='pythonocc-7.4.1-dev X3D exporter (www.pythonocc.org)'/>
<meta name='creator' content='pythonocc-7.4.1-dev generator'/>
<meta name='identifier' content='http://www.pythonocc.org'/>
<meta name='description' content='pythonocc-7.4.1-dev x3dom based shape rendering'/>
</head>
<Scene>
%s
</Scene>
</X3D>
"""
base_shape = BRepPrimAPI_MakeTorus(3, 1).Shape()
# conversion to a nurbs representation
nurbs_converter = BRepBuilderAPI_NurbsConvert(base_shape, True)
# nurbs_converter.Perform()
converted_shape = nurbs_converter.Shape()
# now, all edges should be BSpline curves and surfaces BSpline surfaces
# https://castle-engine.io/x3d_implementation_nurbs.php#section_homogeneous_coordinates
expl = TopologyExplorer(converted_shape)
nurbs_node_str = ""
face_idx = 1
for face in expl.faces():
surf = BRepAdaptor_Surface(face, True)
surf_type = surf.GetType()
def mesh_model(model, res_path, convert=True, all_edges=True):
fil = model.split("/")[-1][:-5]
folder = "/".join(model.split("/")[:-1])
with fileinput.FileInput(model, inplace=True) as fi:
for line in fi:
print(line.replace(
"UNCERTAINTY_MEASURE_WITH_UNIT( LENGTH_MEASURE( 1.00000000000000E-06 )",
"UNCERTAINTY_MEASURE_WITH_UNIT( LENGTH_MEASURE( 1.00000000000000E-17 )"
),
end='')
occ_steps = read_step_file(model)
bt = BRep_Tool()
for occ_cnt in range(len(occ_steps)):
if convert:
try:
nurbs_converter = BRepBuilderAPI_NurbsConvert(
occ_steps[occ_cnt])
nurbs_converter.Perform(occ_steps[occ_cnt])
nurbs = nurbs_converter.Shape()
except:
print("Conversion failed")
continue
else:
nurbs = occ_steps[occ_cnt]
mesh = BRepMesh_IncrementalMesh(occ_steps[occ_cnt], 0.9, False, 0.5,
True)
mesh.Perform()
if not mesh.IsDone():
print("Mesh is not done.")
continue
occ_topo = TopologyExplorer(nurbs)
occ_top = Topo(nurbs)
occ_topo1 = TopologyExplorer(occ_steps[occ_cnt])
occ_top1 = Topo(occ_steps[occ_cnt])
d1_feats = []
d2_feats = []
t_curves = []
tr_curves = []
stats = {}
stats["model"] = model
total_edges = 0
total_surfs = 0
stats["curves"] = []
stats["surfs"] = []
c_cnt = 0
t_cnt = 0
# Iterate over edges
for edge in occ_topo.edges():
curve = BRepAdaptor_Curve(edge)
stats["curves"].append(edge_map[curve.GetType()])
d1_feat = convert_curve(curve)
if edge_map[curve.GetType()] == "Other":
continue
for f in occ_top.faces_from_edge(edge):
if f == None:
print("Broken face")
continue
su = BRepAdaptor_Surface(f)
c = BRepAdaptor_Curve2d(edge, f)
t_curve = {
"surface": f,
"3dcurve": edge,
"3dcurve_id": c_cnt,
"2dcurve_id": t_cnt
}
t_curves.append(t_curve)
tr_curves.append(convert_2dcurve(c))
t_cnt += 1
d1_feats.append(d1_feat)
c_cnt += 1
total_edges += 1
patches = []
faces1 = list(occ_topo1.faces())
# Iterate over faces
for fci, face in enumerate(occ_topo.faces()):
surf = BRepAdaptor_Surface(face)
stats["surfs"].append(surf_map[surf.GetType()])
d2_feat = convert_surface(surf)
if surf_map[surf.GetType()] == "Other":
continue
for tc in t_curves:
if tc["surface"] == face:
patch = {
"3dcurves": [],
"2dcurves": [],
"orientations": [],
"surf_orientation": face.Orientation(),
"wire_ids": [],
"wire_orientations": []
}
for wc, fw in enumerate(occ_top.wires_from_face(face)):
patch["wire_orientations"].append(fw.Orientation())
if all_edges:
edges = [
i for i in WireExplorer(fw).ordered_edges()
]
else:
edges = list(occ_top.edges_from_wire(fw))
for fe in edges:
for ttc in t_curves:
if ttc["3dcurve"].IsSame(fe) and tc[
"surface"] == ttc["surface"]:
patch["3dcurves"].append(ttc["3dcurve_id"])
patch["2dcurves"].append(ttc["2dcurve_id"])
patch["wire_ids"].append(wc)
orientation = fe.Orientation()
patch["orientations"].append(orientation)
patches.append(patch)
break
location = TopLoc_Location()
facing = (bt.Triangulation(faces1[fci], location))
if facing != None:
tab = facing.Nodes()
tri = facing.Triangles()
verts = []
for i in range(1, facing.NbNodes() + 1):
verts.append(list(tab.Value(i).Coord()))
faces = []
for i in range(1, facing.NbTriangles() + 1):
index1, index2, index3 = tri.Value(i).Get()
faces.append([index1 - 1, index2 - 1, index3 - 1])
os.makedirs(res_path, exist_ok=True)
igl.write_triangle_mesh(
"%s/%s_%03i_mesh_%04i.obj" % (res_path, fil, occ_cnt, fci),
np.array(verts), np.array(faces))
d2_feat["faces"] = faces
d2_feat["verts"] = verts
else:
print("Missing triangulation")
continue
d2_feats.append(d2_feat)
total_surfs += 1
bbox = get_boundingbox(occ_steps[occ_cnt], use_mesh=False)
xmin, ymin, zmin, xmax, ymax, zmax = bbox[:6]
bbox1 = [
"%.2f" % xmin,
"%.2f" % ymin,
"%.2f" % zmin,
"%.2f" % xmax,
"%.2f" % ymax,
"%.2f" % zmax,
"%.2f" % (xmax - xmin),
"%.2f" % (ymax - ymin),
"%.2f" % (zmax - zmin)
]
stats["#edges"] = total_edges
stats["#surfs"] = total_surfs
# Fix possible orientation problems
if convert:
for p in patches:
# Check orientation of first curve
if len(p["2dcurves"]) >= 2:
cur = tr_curves[p["2dcurves"][0]]
nxt = tr_curves[p["2dcurves"][1]]
c_ori = p["orientations"][0]
n_ori = p["orientations"][1]
if c_ori == 0:
pole0 = np.array(cur["poles"][0])
pole1 = np.array(cur["poles"][-1])
else:
pole0 = np.array(cur["poles"][-1])
pole1 = np.array(cur["poles"][0])
if n_ori == 0:
pole2 = np.array(nxt["poles"][0])
pole3 = np.array(nxt["poles"][-1])
else:
pole2 = np.array(nxt["poles"][-1])
pole3 = np.array(nxt["poles"][0])
d02 = np.abs(pole0 - pole2)
d12 = np.abs(pole1 - pole2)
d03 = np.abs(pole0 - pole3)
d13 = np.abs(pole1 - pole3)
amin = np.argmin([d02, d12, d03, d13])
if amin == 0 or amin == 2: # Orientation of first curve incorrect, fix
p["orientations"][0] = abs(c_ori - 1)
# Fix all orientations
for i in range(len(p["2dcurves"]) - 1):
cur = tr_curves[p["2dcurves"][i]]
nxt = tr_curves[p["2dcurves"][i + 1]]
c_ori = p["orientations"][i]
n_ori = p["orientations"][i + 1]
if c_ori == 0:
pole1 = np.array(cur["poles"][-1])
else:
pole1 = np.array(cur["poles"][0])
if n_ori == 0:
pole2 = np.array(nxt["poles"][0])
pole3 = np.array(nxt["poles"][-1])
else:
pole2 = np.array(nxt["poles"][-1])
pole3 = np.array(nxt["poles"][0])
d12 = np.abs(pole1 - pole2)
d13 = np.abs(pole1 - pole3)
amin = np.min([d12, d13])
if amin == 1: # Incorrect orientation, flip
p["orientations"][i + 1] = abs(n_ori - 1)
features = {
"curves": d1_feats,
"surfaces": d2_feats,
"trim": tr_curves,
"topo": patches,
"bbox": bbox1
}
os.makedirs(res_path, exist_ok=True)
fip = fil + "_features2"
with open("%s/%s_%03i.yml" % (res_path, fip, occ_cnt), "w") as fili:
yaml.dump(features, fili, indent=2)
fip = fil + "_features"
with open("%s/%s_%03i.yml" % (res_path, fip, occ_cnt), "w") as fili:
features2 = copy.deepcopy(features)
for sf in features2["surfaces"]:
del sf["faces"]
del sf["verts"]
yaml.dump(features2, fili, indent=2)
# res_path = folder.replace("/step/", "/stat/")
# fip = fil + "_stats"
# with open("%s/%s_%03i.yml"%(res_path, fip, occ_cnt), "w") as fili:
# yaml.dump(stats, fili, indent=2)
print("Writing results for %s with %i parts." % (model, len(occ_steps)))
def parse(self, filename):
"""
Method to parse the file `filename`. It returns a matrix with all
the coordinates.
:param string filename: name of the input file.
:return: mesh_points: it is a `n_points`-by-3 matrix containing
the coordinates of the points of the mesh
:rtype: numpy.ndarray
"""
self.infile = filename
self.shape = self.load_shape_from_file(filename)
# cycle on the faces to get the control points
# init some quantities
n_faces = 0
control_point_position = [0]
faces_explorer = TopExp_Explorer(self.shape, TopAbs_FACE)
mesh_points = np.zeros(shape=(0, 3))
while faces_explorer.More():
# performing some conversions to get the right format (BSplineSurface)
face = topods_Face(faces_explorer.Current())
nurbs_converter = BRepBuilderAPI_NurbsConvert(face)
nurbs_converter.Perform(face)
nurbs_face = nurbs_converter.Shape()
brep_face = BRep_Tool.Surface(topods_Face(nurbs_face))
bspline_face = geomconvert_SurfaceToBSplineSurface(brep_face)
# openCascade object
occ_face = bspline_face
# extract the Control Points of each face
n_poles_u = occ_face.NbUPoles()
n_poles_v = occ_face.NbVPoles()
control_polygon_coordinates = np.zeros(shape=(n_poles_u *
n_poles_v, 3))
# cycle over the poles to get their coordinates
i = 0
for pole_u_direction in range(n_poles_u):
for pole_v_direction in range(n_poles_v):
control_point_coordinates = occ_face.Pole(
pole_u_direction + 1, pole_v_direction + 1)
control_polygon_coordinates[i, :] = [
control_point_coordinates.X(),
control_point_coordinates.Y(),
control_point_coordinates.Z()
]
i += 1
# pushing the control points coordinates to the mesh_points array
# (used for FFD)
mesh_points = np.append(mesh_points,
control_polygon_coordinates,
axis=0)
control_point_position.append(control_point_position[-1] +
n_poles_u * n_poles_v)
n_faces += 1
faces_explorer.Next()
self._control_point_position = control_point_position
return mesh_points
def write_face(self, points_face, list_points_edge, topo_face, toledge):
"""
Method to recreate a Face associated to a geometric surface
after the modification of Face points. It returns a TopoDS_Face.
:param points_face: the new face points array.
:param list_points_edge: new edge points
:param topo_face: the face to be modified
:param toledge: tolerance on the surface creation after modification
:return: TopoDS_Face (Shape)
:rtype: TopoDS_Shape
"""
# convert Face to Geom B-spline Surface
nurbs_converter = BRepBuilderAPI_NurbsConvert(topo_face)
nurbs_converter.Perform(topo_face)
nurbs_face = nurbs_converter.Shape()
topo_nurbsface = topods.Face(nurbs_face)
h_geomsurface = BRep_Tool.Surface(topo_nurbsface)
h_bsurface = geomconvert_SurfaceToBSplineSurface(h_geomsurface)
bsurface = h_bsurface
nb_u = bsurface.NbUPoles()
nb_v = bsurface.NbVPoles()
# check consistency
if points_face.shape[0] != nb_u * nb_v:
raise ValueError("Input control points do not have not have the "
"same number as the geometric face!")
# cycle on the face points
indice_cpt = 0
for iu in range(1, nb_u + 1):
for iv in range(1, nb_v + 1):
cpt = points_face[indice_cpt]
bsurface.SetPole(iu, iv, gp_Pnt(cpt[0], cpt[1], cpt[2]))
indice_cpt += 1
# create modified new face
new_bspline_tface = BRepBuilderAPI_MakeFace()
toler = precision_Confusion()
new_bspline_tface.Init(bsurface, False, toler)
# cycle on the wires
face_wires_explorer = TopExp_Explorer(
topo_nurbsface.Oriented(TopAbs_FORWARD), TopAbs_WIRE)
ind_edge_total = 0
while face_wires_explorer.More():
# get old wire
twire = topods_Wire(face_wires_explorer.Current())
# cycle on the edges
ind_edge = 0
wire_explorer_edge = TopExp_Explorer(
twire.Oriented(TopAbs_FORWARD), TopAbs_EDGE)
# check edges order on the wire
mode3d = True
tolerance_edges = toledge
wire_order = ShapeAnalysis_WireOrder(mode3d, tolerance_edges)
# an edge list
deformed_edges = []
# cycle on the edges
while wire_explorer_edge.More():
tedge = topods_Edge(wire_explorer_edge.Current())
new_bspline_tedge = self.write_edge(
list_points_edge[ind_edge_total], tedge)
deformed_edges.append(new_bspline_tedge)
analyzer = topexp()
vfirst = analyzer.FirstVertex(new_bspline_tedge)
vlast = analyzer.LastVertex(new_bspline_tedge)
pt1 = BRep_Tool.Pnt(vfirst)
pt2 = BRep_Tool.Pnt(vlast)
wire_order.Add(pt1.XYZ(), pt2.XYZ())
ind_edge += 1
ind_edge_total += 1
wire_explorer_edge.Next()
# grouping the edges in a wire, then in the face
# check edges order and connectivity within the wire
wire_order.Perform()
# new wire to be created
stol = ShapeFix_ShapeTolerance()
new_bspline_twire = BRepBuilderAPI_MakeWire()
for order_i in range(1, wire_order.NbEdges() + 1):
deformed_edge_i = wire_order.Ordered(order_i)
if deformed_edge_i > 0:
# insert the deformed edge to the new wire
new_edge_toadd = deformed_edges[deformed_edge_i - 1]
stol.SetTolerance(new_edge_toadd, toledge)
new_bspline_twire.Add(new_edge_toadd)
if new_bspline_twire.Error() != 0:
stol.SetTolerance(new_edge_toadd, toledge * 10.0)
new_bspline_twire.Add(new_edge_toadd)
else:
deformed_edge_revers = deformed_edges[
np.abs(deformed_edge_i) - 1]
stol.SetTolerance(deformed_edge_revers, toledge)
new_bspline_twire.Add(deformed_edge_revers)
if new_bspline_twire.Error() != 0:
stol.SetTolerance(deformed_edge_revers, toledge * 10.0)
new_bspline_twire.Add(deformed_edge_revers)
# add new wire to the Face
new_bspline_tface.Add(new_bspline_twire.Wire())
face_wires_explorer.Next()
return topods.Face(new_bspline_tface.Face())
def parse_face(topo_face):
"""
Method to parse a single `Face` (a single patch nurbs surface).
It returns a matrix with all the coordinates of control points of the
`Face` and a second list with all the control points related to the
`Edges` of the `Face.`
:param Face topo_face: the input Face.
:return: control points of the `Face`, control points related to
`Edges`.
:rtype: tuple(numpy.ndarray, list)
"""
# get some Face - Edge - Vertex data map information
mesh_points_edge = []
face_exp_wire = TopExp_Explorer(topo_face, TopAbs_WIRE)
# loop on wires per face
while face_exp_wire.More():
twire = topods_Wire(face_exp_wire.Current())
wire_exp_edge = TopExp_Explorer(twire, TopAbs_EDGE)
# loop on edges per wire
while wire_exp_edge.More():
edge = topods_Edge(wire_exp_edge.Current())
bspline_converter = BRepBuilderAPI_NurbsConvert(edge)
bspline_converter.Perform(edge)
bspline_tshape_edge = bspline_converter.Shape()
h_geom_edge = BRep_Tool_Curve(
topods_Edge(bspline_tshape_edge))[0]
h_bspline_edge = geomconvert_CurveToBSplineCurve(h_geom_edge)
bspline_geom_edge = h_bspline_edge
nb_poles = bspline_geom_edge.NbPoles()
# Edge geometric properties
edge_ctrlpts = TColgp_Array1OfPnt(1, nb_poles)
bspline_geom_edge.Poles(edge_ctrlpts)
points_single_edge = np.zeros((0, 3))
for i in range(1, nb_poles + 1):
ctrlpt = edge_ctrlpts.Value(i)
ctrlpt_position = np.array(
[[ctrlpt.Coord(1),
ctrlpt.Coord(2),
ctrlpt.Coord(3)]])
points_single_edge = np.append(points_single_edge,
ctrlpt_position,
axis=0)
mesh_points_edge.append(points_single_edge)
wire_exp_edge.Next()
face_exp_wire.Next()
# extract mesh points (control points) on Face
mesh_points_face = np.zeros((0, 3))
# convert Face to Geom B-spline Face
nurbs_converter = BRepBuilderAPI_NurbsConvert(topo_face)
nurbs_converter.Perform(topo_face)
nurbs_face = nurbs_converter.Shape()
h_geomsurface = BRep_Tool.Surface(topods.Face(nurbs_face))
h_bsurface = geomconvert_SurfaceToBSplineSurface(h_geomsurface)
bsurface = h_bsurface
# get access to control points (poles)
nb_u = bsurface.NbUPoles()
nb_v = bsurface.NbVPoles()
ctrlpts = TColgp_Array2OfPnt(1, nb_u, 1, nb_v)
bsurface.Poles(ctrlpts)
for indice_u_direction in range(1, nb_u + 1):
for indice_v_direction in range(1, nb_v + 1):
ctrlpt = ctrlpts.Value(indice_u_direction, indice_v_direction)
ctrlpt_position = np.array(
[[ctrlpt.Coord(1),
ctrlpt.Coord(2),
ctrlpt.Coord(3)]])
mesh_points_face = np.append(mesh_points_face,
ctrlpt_position,
axis=0)
return mesh_points_face, mesh_points_edge
def write(self, mesh_points, filename, tolerance=None):
"""
Writes a output file, called `filename`, copying all the structures
from self.filename but the coordinates. `mesh_points` is a matrix
that contains the new coordinates to write in the output file.
:param numpy.ndarray mesh_points: it is a *n_points*-by-3 matrix
containing the coordinates of the points of the mesh.
:param str filename: name of the output file.
:param float tolerance: tolerance for the construction of the faces
and wires in the write function. If not given it uses
`self.tolerance`.
"""
self._check_filename_type(filename)
self._check_extension(filename)
self._check_infile_instantiation()
self.outfile = filename
if tolerance is not None:
self.tolerance = tolerance
# cycle on the faces to update the control points position
# init some quantities
faces_explorer = TopExp_Explorer(self.shape, TopAbs_FACE)
n_faces = 0
control_point_position = self._control_point_position
compound_builder = BRep_Builder()
compound = TopoDS_Compound()
compound_builder.MakeCompound(compound)
while faces_explorer.More():
# similar to the parser method
face = topods_Face(faces_explorer.Current())
nurbs_converter = BRepBuilderAPI_NurbsConvert(face)
nurbs_converter.Perform(face)
nurbs_face = nurbs_converter.Shape()
face_aux = topods_Face(nurbs_face)
brep_face = BRep_Tool.Surface(topods_Face(nurbs_face))
bspline_face = geomconvert_SurfaceToBSplineSurface(brep_face)
occ_face = bspline_face
n_poles_u = occ_face.NbUPoles()
n_poles_v = occ_face.NbVPoles()
i = 0
for pole_u_direction in range(n_poles_u):
for pole_v_direction in range(n_poles_v):
control_point_coordinates = mesh_points[
i + control_point_position[n_faces], :]
point_xyz = gp_XYZ(*control_point_coordinates)
gp_point = gp_Pnt(point_xyz)
occ_face.SetPole(pole_u_direction + 1,
pole_v_direction + 1, gp_point)
i += 1
# construct the deformed wire for the trimmed surfaces
wire_maker = BRepBuilderAPI_MakeWire()
tol = ShapeFix_ShapeTolerance()
brep = BRepBuilderAPI_MakeFace(occ_face, self.tolerance).Face()
brep_face = BRep_Tool.Surface(brep)
# cycle on the edges
edge_explorer = TopExp_Explorer(nurbs_face, TopAbs_EDGE)
while edge_explorer.More():
edge = topods_Edge(edge_explorer.Current())
# edge in the (u,v) coordinates
edge_uv_coordinates = BRep_Tool.CurveOnSurface(edge, face_aux)
# evaluating the new edge: same (u,v) coordinates, but
# different (x,y,x) ones
edge_phis_coordinates_aux = BRepBuilderAPI_MakeEdge(
edge_uv_coordinates[0], brep_face)
edge_phis_coordinates = edge_phis_coordinates_aux.Edge()
tol.SetTolerance(edge_phis_coordinates, self.tolerance)
wire_maker.Add(edge_phis_coordinates)
edge_explorer.Next()
# grouping the edges in a wire
wire = wire_maker.Wire()
# trimming the surfaces
brep_surf = BRepBuilderAPI_MakeFace(occ_face, wire).Shape()
compound_builder.Add(compound, brep_surf)
n_faces += 1
faces_explorer.Next()
self.write_shape_to_file(compound, self.outfile)
def __init__(self, shape: TopoDS_Shape):
self.mknurbs = BRepBuilderAPI_NurbsConvert(shape)
self.shape = shape
