def vertices(self) -> List[BRepVertex]:
vertices = []
explorer = BRepTools_WireExplorer(self.loop)
while explorer.More():
vertex = explorer.CurrentVertex()
vertices.append(BRepVertex(vertex))
explorer.Next()
return vertices
class WireExplorer(object):
'''
Wire traversal
'''
def __init__(self, wire):
assert isinstance(wire, TopoDS_Wire), 'not a TopoDS_Wire'
self.wire = wire
self.wire_explorer = BRepTools_WireExplorer(self.wire)
self.done = False
def _reinitialize(self):
self.wire_explorer = BRepTools_WireExplorer(self.wire)
self.done = False
def _loop_topo(self, edges=True):
if self.done:
self._reinitialize()
topologyType = topods_Edge if edges else topods_Vertex
seq = []
hashes = [] # list that stores hashes to avoid redundancy
occ_seq = TopTools_ListOfShape()
while self.wire_explorer.More():
# loop edges
if edges:
current_item = self.wire_explorer.Current()
# loop vertices
else:
current_item = self.wire_explorer.CurrentVertex()
current_item_hash = current_item.__hash__()
if not current_item_hash in hashes:
hashes.append(current_item_hash)
occ_seq.Append(current_item)
self.wire_explorer.Next()
# Convert occ_seq to python list
occ_iterator = TopTools_ListIteratorOfListOfShape(occ_seq)
while occ_iterator.More():
topo_to_add = topologyType(occ_iterator.Value())
seq.append(topo_to_add)
occ_iterator.Next()
self.done = True
return iter(seq)
def ordered_edges(self):
return self._loop_topo(edges=True)
def ordered_vertices(self):
return self._loop_topo(edges=False)
def __init__(self, wire, face=None):
if face is None:
explorer = BRepTools_WireExplorer(wire.object)
else:
explorer = BRepTools_WireExplorer(wire.object, face.object)
edges = []
current_verts = []
while explorer.More():
ei = Edge(explorer.Current())
vi = Vertex(explorer.CurrentVertex())
edges.append(ei)
current_verts.append(vi)
explorer.Next()
# CurrentVertex doesn't get the last vertex. Try to get it.
ordered_verts = list(current_verts)
if edges:
vi = Vertex(explorer.CurrentVertex())
ordered_verts.append(vi)
self._edges = edges
self._current_verts = current_verts
self._ordered_verts = ordered_verts
class WireExplorer:
'''
Wire traversal
'''
def __init__(self, wire):
if not isinstance(wire, TopoDS_Wire):
raise AsssertionError('not a TopoDS_Wire')
self.wire = wire
self.wire_explorer = BRepTools_WireExplorer(self.wire)
self.done = False
def _reinitialize(self):
self.wire_explorer = BRepTools_WireExplorer(self.wire)
self.done = False
def _loop_topo(self, edges=True):
if self.done:
self._reinitialize()
topologyType = topods_Edge if edges else topods_Vertex
seq = []
occ_seq = []
while self.wire_explorer.More():
# loop edges
if edges:
current_item = self.wire_explorer.Current()
# loop vertices
else:
current_item = self.wire_explorer.CurrentVertex()
occ_seq.append(current_item)
self.wire_explorer.Next()
# Convert occ_seq to python list
for elem in occ_seq:
topo_to_add = topologyType(elem)
seq.append(topo_to_add)
self.done = True
return iter(seq)
def ordered_edges(self):
return self._loop_topo(edges=True)
def ordered_vertices(self):
return self._loop_topo(edges=False)
class WireExplorer:
"""
Wire traversal
"""
def __init__(self, wire: TopoDS_Wire) -> None:
if not isinstance(wire, TopoDS_Wire):
raise AssertionError("not a TopoDS_Wire")
self.wire = wire
self.wire_explorer = BRepTools_WireExplorer(self.wire)
self.done = False
def _reinitialize(self) -> None:
self.wire_explorer = BRepTools_WireExplorer(self.wire)
self.done = False
def _loop_topo(self, edges: Optional[bool] = True) -> Iterator[Any]:
if self.done:
self._reinitialize()
topology_type = topods_Edge if edges else topods_Vertex
seq = []
while self.wire_explorer.More():
# loop edges
if edges:
current_item = self.wire_explorer.Current()
# loop vertices
else:
current_item = self.wire_explorer.CurrentVertex()
seq.append(topology_type(current_item))
self.wire_explorer.Next()
self.done = True
return iter(seq)
def ordered_edges(self) -> Iterator[TopoDS_Edge]:
return self._loop_topo(edges=True)
def ordered_vertices(self) -> Iterator[TopoDS_Vertex]:
return self._loop_topo(edges=False)
def getWireStartPointAndTangentDir(aWire):
ex = BRepTools_WireExplorer(aWire)
edge = ex.Current()
vertex = ex.CurrentVertex()
v = getVectorTangentToCurveAtPoint(edge, 0)
return BRep_Tool.Pnt(vertex), gp_Dir(v)
def cut_out(base):
outer = gp_Circ2d(gp_OX2d(), top_radius - 1.75 * roller_diameter)
inner = gp_Circ2d(gp_OX2d(), center_radius + 0.75 * roller_diameter)
geom_outer = GCE2d_MakeCircle(outer).Value()
geom_inner = GCE2d_MakeCircle(inner).Value()
geom_inner.Reverse()
base_angle = (2. * M_PI) / mounting_hole_count
hole_angle = atan(hole_radius / mounting_radius)
correction_angle = 3 * hole_angle
left = gp_Lin2d(gp_Origin2d(), gp_DX2d())
right = gp_Lin2d(gp_Origin2d(), gp_DX2d())
left.Rotate(gp_Origin2d(), correction_angle)
right.Rotate(gp_Origin2d(), base_angle - correction_angle)
geom_left = GCE2d_MakeLine(left).Value()
geom_right = GCE2d_MakeLine(right).Value()
inter_1 = Geom2dAPI_InterCurveCurve(geom_outer, geom_left)
inter_2 = Geom2dAPI_InterCurveCurve(geom_outer, geom_right)
inter_3 = Geom2dAPI_InterCurveCurve(geom_inner, geom_right)
inter_4 = Geom2dAPI_InterCurveCurve(geom_inner, geom_left)
if inter_1.Point(1).X() > 0:
p1 = inter_1.Point(1)
else:
p1 = inter_1.Point(2)
if inter_2.Point(1).X() > 0:
p2 = inter_2.Point(1)
else:
p2 = inter_2.Point(2)
if inter_3.Point(1).X() > 0:
p3 = inter_3.Point(1)
else:
p3 = inter_3.Point(2)
if inter_4.Point(1).X() > 0:
p4 = inter_4.Point(1)
else:
p4 = inter_4.Point(2)
trimmed_outer = GCE2d_MakeArcOfCircle(outer, p1, p2).Value()
trimmed_inner = GCE2d_MakeArcOfCircle(inner, p4, p3).Value()
plane = gp_Pln(gp_Origin(), gp_DZ())
arc1 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_outer, plane)).Edge()
lin1 = BRepBuilderAPI_MakeEdge(gp_Pnt(p2.X(), p2.Y(), 0),
gp_Pnt(p3.X(), p3.Y(), 0)).Edge()
arc2 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_inner, plane)).Edge()
lin2 = BRepBuilderAPI_MakeEdge(gp_Pnt(p4.X(), p4.Y(), 0),
gp_Pnt(p1.X(), p1.Y(), 0)).Edge()
cutout_wire = BRepBuilderAPI_MakeWire(arc1)
cutout_wire.Add(lin1)
cutout_wire.Add(arc2)
cutout_wire.Add(lin2)
# Turn the wire into a face
cutout_face = BRepBuilderAPI_MakeFace(cutout_wire.Wire())
filleted_face = BRepFilletAPI_MakeFillet2d(cutout_face.Face())
explorer = BRepTools_WireExplorer(cutout_wire.Wire())
while explorer.More():
vertex = explorer.CurrentVertex()
filleted_face.AddFillet(vertex, roller_radius)
explorer.Next()
cutout = BRepPrimAPI_MakePrism(filleted_face.Shape(),
gp_Vec(0.0, 0.0, thickness)).Shape()
result = base
rotate = gp_Trsf()
for i in range(0, mounting_hole_count):
rotate.SetRotation(gp_OZ(), i * 2. * M_PI / mounting_hole_count)
rotated_cutout = BRepBuilderAPI_Transform(cutout, rotate, True)
result = BRepAlgoAPI_Cut(result,
rotated_cutout.Shape()).Shape()
return result