def project_point_on_curve():
'''
'''
point_to_project = gp_Pnt(1., 2., 3.)
radius = 5.
# create a circle, centered at origin with a given radius
circle = Geom_Circle(gp_XOY(), radius)
display.DisplayShape(circle)
display.DisplayShape(point_to_project, update=True)
display.DisplayMessage(point_to_project, "P")
# project the point P on the circle
projection = GeomAPI_ProjectPointOnCurve(point_to_project,
circle.GetHandle())
# get the results of the projection
# the point
projected_point = projection.NearestPoint()
# the number of possible results
nb_results = projection.NbPoints()
print("NbResults : %i" % nb_results)
pstring = "N : at Distance : %f" % projection.LowerDistance()
display.DisplayMessage(projected_point, pstring)
# thre maybe many different possible solutions
if nb_results > 0:
for i in range(1, nb_results + 1):
Q = projection.Point(i)
distance = projection.Distance(i)
pstring = "Q%i: at Distance :%f" % (i, distance)
display.DisplayShape(Q)
display.DisplayMessage(Q, pstring)
def __init__(self):
super(Sketch_CommandArc3P, self).__init__("Arc3P.")
self.myArc3PAction = Arc3PAction.Nothing
self.tempGeom_Circle = Geom_Circle(self.curCoordinateSystem.Ax2(), SKETCH_RADIUS)
self.myRubberCircle = AIS_Circle(self.tempGeom_Circle)
self.myRubberCircle.SetColor(Quantity_Color(Quantity_NOC_LIGHTPINK1))
self.temp2d_Circ = gp_Circ2d()
self.temp_Circ = gp_Circ(self.curCoordinateSystem.Ax2(), SKETCH_RADIUS)
self.temp2dAdaptor_Curve = Geom2dAdaptor_Curve()
self.mySecondgp_Pnt2d = gp.Origin2d()
self.third_Pnt = gp.Origin()
self.midpoint2d = gp.Origin2d()
self.tempu1_pnt2d = gp.Origin2d()
self.tempu2_pnt2d = gp.Origin2d()
self.tempGeom2d_Line = Geom2d_Line(self.tempu1_pnt2d, gp.DX2d())
self.tempGeom2d_Circle = Geom2d_Circle(self.temp2d_Circ)
self.FirstGeom2d_Point = Geom2d_CartesianPoint(self.tempu1_pnt2d)
self.TempGeom2d_Point = Geom2d_CartesianPoint(self.tempu2_pnt2d)
self.u1 =0
self.u2 = 0
self.temp_u1=0
self.temp_u2 = 0
self.dist1=0
self.dist2 = 0
def convert_circ_to_geomCirc(self, circ):
"""Convert 2d circle ((cx, cy), r) to type <Geom_Circle>"""
(cx, cy), rad = circ
cntrPt = gp_Pnt(cx, cy, 0)
ax2 = gp_Ax2(cntrPt, gp_Dir(0, 0, 1))
geomCirc = Geom_Circle(ax2, rad)
geomCirc.Transform(self.Trsf)
return geomCirc
def __init__(self):
super(Sketch_CommandCircleCenterRadius, self).__init__("CircleCR.")
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Nothing
self.radius = 0.0
self.tempGeom_Circle = Geom_Circle(self.curCoordinateSystem.Ax2(),
SKETCH_RADIUS)
self.myRubberCircle = AIS_Circle(self.tempGeom_Circle)
self.myCircleAx2d = gp_Ax2d()
def __init__(self):
super(Sketch_CommandNurbCircle, self).__init__("NURBS Circle.")
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Nothing
self.radius = 0.0
self.tempGeom_Circle = Geom_Circle(self.curCoordinateSystem.Ax2(), SKETCH_RADIUS)
self.myRubberCircle = AIS_Circle(self.tempGeom_Circle)
self.myRubberCircle.SetColor(Quantity_Color(Quantity_NOC_LIGHTPINK1))
self.myCircleAx2d = gp_Ax2d()
def circ(self, cntr, rad, constr=False):
"""Create a construction circle """
cx, cy = cntr
cntrPt = gp_Pnt(cx, cy, 0)
ax2 = gp_Ax2(cntrPt, gp_Dir(0, 0, 1))
geomCirc = Geom_Circle(ax2, rad)
geomCirc.Transform(self.Trsf)
if constr:
self.ccircList.append(geomCirc)
else:
edge = BRepBuilderAPI_MakeEdge(Geom_Curve(geomCirc))
self.wire = BRepBuilderAPI_MakeWire(edge.Edge()).Wire()
self.wireList.append(self.wire)
def test_project_point_on_curve(self):
'''Test: project point on curve'''
P = gp_Pnt(1., 2., 3.)
radius = 5.
C = Geom_Circle(gp_XOY(), radius)
PPC = GeomAPI_ProjectPointOnCurve(P, C)
N = PPC.NearestPoint()
self.assertIsInstance(N, gp_Pnt)
NbResults = PPC.NbPoints()
edg = make_edge(C)
self.assertFalse(edg.IsNull())
if NbResults > 0:
for i in range(1, NbResults + 1):
Q = PPC.Point(i)
self.assertIsInstance(Q, gp_Pnt)
distance = PPC.Distance(i)
# in any case, it should be > 1
self.assertGreater(distance, 1.)
pstring = "N : at Distance : " + repr(PPC.LowerDistance())
for i in range(1, NbResults + 1):
Q = PPC.Point(i)
self.assertIsInstance(Q, gp_Pnt)
distance = PPC.Distance(i)
# in any case, it should be > 1
self.assertGreater(distance, 1.)
pstring = "Q" + repr(i) + ": at Distance :" + repr(PPC.Distance(i))
print(pstring)
def __init__(self):
plotocc.__init__(self)
self.axs = gp_Ax3()
self.circle = Geom_Circle(gp_Circ(self.axs.Ax2(), 100))
p0, v1, v2 = gp_Pnt(), gp_Vec(), gp_Vec()
GeomLProp_CurveTool.D2(self.circle, 0, p0, v1, v2)
self.poly_axs = gp_Ax3(p0, vec_to_dir(v1))
for num in range(4, 9):
self.poly = self.make_PolyWire(
num=num, radi=20.0, axs=self.poly_axs)
self.base = self.make_Thru(50)
self.display.DisplayShape(
self.base, transparency=0.7, color="BLUE")
write_step_file(self.base, self.tmpdir +
"ThruSurf_{:d}.stp".format(num))
def FindGeometry(self, object: AIS_InteractiveObject):
if object.Type() == AIS_KOI_Shape:
shape = self.myContext.SelectedShape()
if shape.ShapeType() == TopAbs_VERTEX:
pass
elif shape.ShapeType() == TopAbs_EDGE:
curve = BRepAdaptor_Curve(shape)
curve_type = curve.GetType()
if curve_type == GeomAbs_BezierCurve:
return curve.Bezier()
elif curve_type == GeomAbs_BSplineCurve:
return curve.BSpline()
elif curve_type == GeomAbs_Circle:
return Geom_Circle(curve.Circle())
elif curve_type == GeomAbs_Line:
return Geom_Line(curve.Line())
elif shape.ShapeType() == TopAbs_FACE:
pass
def MouseInputEvent(self, thePnt2d: gp_Pnt2d, buttons, modifier):
if self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Nothing:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_CenterPoint:
self.curPnt2d = self.myAnalyserSnap.MouseInput(thePnt2d)
self.myFirstgp_Pnt2d = gp_Pnt2d(self.curPnt2d.X(),
self.curPnt2d.Y())
self.myFirstPoint.SetPnt(
elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.myCircleAx2d.SetLocation(self.myFirstgp_Pnt2d)
self.tempGeom_Circle.SetLocation(self.myFirstPoint.Pnt())
self.tempGeom_Circle.SetRadius(SKETCH_RADIUS)
self.myRubberCircle.SetCircle(self.tempGeom_Circle)
self.myContext.Display(self.myRubberCircle, True)
self.myRubberLine.SetPoints(self.myFirstPoint, self.myFirstPoint)
self.myContext.Display(self.myRubberLine, True)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Input_RadiusPoint
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_RadiusPoint:
self.curPnt2d = self.myAnalyserSnap.MouseInputException(
self.myFirstgp_Pnt2d, thePnt2d, TangentType.Circle_CenterPnt,
True)
self.radius = self.myFirstgp_Pnt2d.Distance(self.curPnt2d)
myGeom2d_Circle = Geom2d_Circle(self.myCircleAx2d, self.radius)
Geom_Circle1 = Geom_Circle(
elclib.To3d(self.curCoordinateSystem.Ax2(),
myGeom2d_Circle.Circ2d()))
myAIS_Circle = AIS_Circle(Geom_Circle1)
self.AddObject(myGeom2d_Circle, myAIS_Circle,
Sketch_GeometryType.CircleSketchObject)
self.myContext.Remove(self.myRubberCircle, True)
self.myContext.Remove(self.myRubberLine, True)
self.myContext.Display(myAIS_Circle, True)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Input_CenterPoint
return False
def recognize_edge(self, a_edge):
""" Takes a TopoDS shape and tries to identify its nature
whether it is a plane a cylinder a torus etc.
if a plane, returns the normal
if a cylinder, returns the radius
"""
curve = BRepAdaptor_Curve(a_edge)
curve_type = curve.GetType()
if curve_type == GeomAbs_BezierCurve:
print("--> Bezier")
self._selectedShape = curve.Bezier()
elif curve_type == GeomAbs_BSplineCurve:
print("--> BSpline")
self._selectedShape = curve.BSpline()
elif curve_type == GeomAbs_Circle:
print("--> Circle")
self._selectedShape = Geom_Circle(curve.Circle())
else:
# TODO there are plenty other type that can be checked
# see documentation for the BRepAdaptor class
# https://www.opencascade.com/doc/occt-6.9.1/refman/html/class_b_rep_adaptor___surface.html
print("not implemented")
def face_rotate(self, face=TopoDS_Face(), axs=gp_Ax1()):
plan = self.pln_on_face(face)
plan_axs = plan.Position()
self.display.DisplayShape(plan_axs.Location())
v0 = dir_to_vec(self.tmp_axis.Direction())
v1 = dir_to_vec(plan_axs.Direction())
print(v0.Dot(v1))
lin_vec = gp_Vec(axs.Location(), plan_axs.Location())
edg_circl = Geom_Circle(
gp_Circ(
gp_Ax2(axs.Location(), axs.Direction(), vec_to_dir(lin_vec)),
5))
rim_u0, rim_u1 = edg_circl.FirstParameter(), edg_circl.LastParameter()
rim_p0 = edg_circl.Value(rim_u0)
pln_angle = self.tmp_axis.Angle(plan_axs)
ref_angle = self.tmp_axis.Direction().AngleWithRef(
plan_axs.Direction(), axs.Direction())
print(np.rad2deg(pln_angle), np.rad2deg(ref_angle))
rim_u2 = -ref_angle
rim_p2 = edg_circl.Value(rim_u2)
rim_angle = Geom_TrimmedCurve(edg_circl, rim_u0, rim_u2)
trf = gp_Trsf()
#trf.SetRotation(axs, 2*np.pi - ref_angle)
if np.abs(ref_angle) >= np.pi / 2:
trf.SetRotation(axs, -ref_angle)
elif 0 < ref_angle < np.pi / 2:
trf.SetRotation(axs, np.pi - ref_angle)
elif -np.pi / 2 < ref_angle < 0:
trf.SetRotation(axs, -ref_angle - np.pi)
else:
trf.SetRotation(axs, -ref_angle)
#trf.SetTransformation(axs3.Rotated(axs, angle), axs3)
loc_face = TopLoc_Location(trf)
new_face = face.Moved(loc_face)
self.display.DisplayShape(new_face, transparency=0.5)
self.display.DisplayShape(rim_angle)
self.display.DisplayShape(rim_p0)
self.display.DisplayShape(rim_p2)
return new_face
def MakeCircleFace(self, Radius: float) -> TopoDS_Face:
circle = Geom_Circle( gp_XOY(), Radius )
ed = make_edge( circle )
wire = make_wire( ed )
return make_face( wire )
class Sketch_CommandNurbCircleTriangle(Sketch_Command):
def __init__(self):
super(Sketch_CommandNurbCircleTriangle, self).__init__("NURBS Circle.")
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Nothing
self.radius = 0.0
self.tempGeom_Circle = Geom_Circle(self.curCoordinateSystem.Ax2(), SKETCH_RADIUS)
self.myRubberCircle = AIS_Circle(self.tempGeom_Circle)
self.myRubberCircle.SetColor(Quantity_Color(Quantity_NOC_BLUE1))
self.myCircleAx2d = gp_Ax2d()
def Action(self):
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Input_CenterPoint
self.tempGeom_Circle.SetAxis(self.curCoordinateSystem.Axis())
# if self.curCoordinateSystem.XDirection():
# self.myCircleAx2d.SetDirection(gp_Dir2d(self.curCoordinateSystem.XDirection().X(), self.curCoordinateSystem.XDirection().Y()))
def MouseInputEvent(self, thePnt2d: gp_Pnt2d, buttons, modifier):
if self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Nothing:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_CenterPoint:
self.curPnt2d = self.myAnalyserSnap.MouseInput(thePnt2d)
self.myFirstgp_Pnt2d = gp_Pnt2d(self.curPnt2d.X(), self.curPnt2d.Y())
self.myFirstPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.myCircleAx2d.SetLocation(self.myFirstgp_Pnt2d)
self.tempGeom_Circle.SetLocation(self.myFirstPoint.Pnt())
self.tempGeom_Circle.SetRadius(SKETCH_RADIUS)
self.myRubberCircle.SetCircle(self.tempGeom_Circle)
self.myContext.Display(self.myRubberCircle, True)
# self.myRubberLine.SetPoints(self.myFirstPoint, self.myFirstPoint)
# self.myContext.Display(self.myRubberLine, True)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Input_RadiusPoint
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_RadiusPoint:
self.curPnt2d = self.myAnalyserSnap.MouseInputException(self.myFirstgp_Pnt2d, thePnt2d,
TangentType.Circle_CenterPnt, True)
self.radius = self.myFirstgp_Pnt2d.Distance(self.curPnt2d)
self.tempGeom2d_Circle = Geom2d_Circle.DownCast(
geomapi_To2d(self.tempGeom_Circle, gp_Pln(self.curCoordinateSystem)))
self.myContext.Remove(self.myRubberCircle, True)
nurbs = self.ToNurbs_Triangle()
self.bspline_node = BsplineNode(nurbs.GetName(), self.rootNode)
self.bspline_node.setSketchObject(nurbs)
self.AddObject(self.tempGeom2d_Circle, nurbs.GetAIS_Object(), Sketch_GeometryType.CircleSketchObject)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Nothing
return False
def MouseMoveEvent(self, thePnt2d: gp_Pnt2d, buttons, modifiers):
if self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Nothing:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_CenterPoint:
self.curPnt2d = self.myAnalyserSnap.MouseMove(thePnt2d)
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_RadiusPoint:
self.curPnt2d = self.myAnalyserSnap.MouseMoveException(self.myFirstgp_Pnt2d, thePnt2d,
TangentType.Circle_CenterPnt, True)
self.radius = self.myFirstgp_Pnt2d.Distance(self.curPnt2d)
if self.radius == 0.0:
self.radius = 1.0
self.tempGeom_Circle.SetRadius(self.radius)
self.myContext.Redisplay(self.myRubberCircle, True)
self.mySecondPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
# self.myRubberLine.SetPoints(self.myFirstPoint, self.mySecondPoint)
# self.myContext.Redisplay(self.myRubberLine, True)
def CancelEvent(self):
if self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Nothing:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_CenterPoint:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_RadiusPoint:
self.myContext.Remove(self.myRubberCircle, True)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Nothing
def GetTypeOfMethod(self):
return Sketch_ObjectTypeOfMethod.NurbsCircleTriangle_Method
def ToNurbs_Triangle(self):
nurbsCircle = Sketch_Bspline(self.myContext, self.curCoordinateSystem)
convert: Geom_BSplineCurve = geomconvert_CurveToBSplineCurve(self.tempGeom_Circle)
poles = TColgp_Array1OfPnt2d_to_point_list(convert.Poles())
weights = convert.Weights()
knots = convert.Knots()
multiplicity = convert.Multiplicities()
for pole in poles:
x, y = pole.X(), pole.Y()
nurbsCircle.AddPoles(gp_Pnt2d(x, y))
nurbsCircle.AddPoles(gp_Pnt2d(poles[0].X(), poles[0].Y()))
nurbsCircle.SetWeights([1.0, 0.5000000000000001, 1.0, 0.5000000000000001, 1.0, 0.5000000000000001, 1.0])
nurbsCircle.SetKnots(TColStd_Array1OfNumber_to_list(knots))
nurbsCircle.SetMultiplicities([3, 2, 2, 3])
nurbsCircle.SetDegree(convert.Degree())
nurbsCircle.Compute()
return nurbsCircle
class Sketch_CommandCircleCenterRadius(Sketch_Command):
"""
@attention: This command is not used in the program.
"""
def __init__(self):
super(Sketch_CommandCircleCenterRadius, self).__init__("CircleCR.")
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Nothing
self.radius = 0.0
self.tempGeom_Circle = Geom_Circle(self.curCoordinateSystem.Ax2(),
SKETCH_RADIUS)
self.myRubberCircle = AIS_Circle(self.tempGeom_Circle)
self.myCircleAx2d = gp_Ax2d()
def Action(self):
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Input_CenterPoint
self.tempGeom_Circle.SetAxis(self.curCoordinateSystem.Axis())
self.myCircleAx2d.SetDirection(
gp_Dir2d(self.curCoordinateSystem.XDirection().X(),
self.curCoordinateSystem.XDirection().Y()))
def MouseInputEvent(self, thePnt2d: gp_Pnt2d, buttons, modifier):
if self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Nothing:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_CenterPoint:
self.curPnt2d = self.myAnalyserSnap.MouseInput(thePnt2d)
self.myFirstgp_Pnt2d = gp_Pnt2d(self.curPnt2d.X(),
self.curPnt2d.Y())
self.myFirstPoint.SetPnt(
elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.myCircleAx2d.SetLocation(self.myFirstgp_Pnt2d)
self.tempGeom_Circle.SetLocation(self.myFirstPoint.Pnt())
self.tempGeom_Circle.SetRadius(SKETCH_RADIUS)
self.myRubberCircle.SetCircle(self.tempGeom_Circle)
self.myContext.Display(self.myRubberCircle, True)
self.myRubberLine.SetPoints(self.myFirstPoint, self.myFirstPoint)
self.myContext.Display(self.myRubberLine, True)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Input_RadiusPoint
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_RadiusPoint:
self.curPnt2d = self.myAnalyserSnap.MouseInputException(
self.myFirstgp_Pnt2d, thePnt2d, TangentType.Circle_CenterPnt,
True)
self.radius = self.myFirstgp_Pnt2d.Distance(self.curPnt2d)
myGeom2d_Circle = Geom2d_Circle(self.myCircleAx2d, self.radius)
Geom_Circle1 = Geom_Circle(
elclib.To3d(self.curCoordinateSystem.Ax2(),
myGeom2d_Circle.Circ2d()))
myAIS_Circle = AIS_Circle(Geom_Circle1)
self.AddObject(myGeom2d_Circle, myAIS_Circle,
Sketch_GeometryType.CircleSketchObject)
self.myContext.Remove(self.myRubberCircle, True)
self.myContext.Remove(self.myRubberLine, True)
self.myContext.Display(myAIS_Circle, True)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Input_CenterPoint
return False
def MouseMoveEvent(self, thePnt2d: gp_Pnt2d, buttons, modifiers):
if self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Nothing:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_CenterPoint:
self.curPnt2d = self.myAnalyserSnap.MouseMove(thePnt2d)
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_RadiusPoint:
self.curPnt2d = self.myAnalyserSnap.MouseMoveException(
self.myFirstgp_Pnt2d, thePnt2d, TangentType.Circle_CenterPnt,
True)
self.radius = self.myFirstgp_Pnt2d.Distance(self.curPnt2d)
self.tempGeom_Circle.SetRadius(self.radius)
self.myContext.Redisplay(self.myRubberCircle, True)
self.mySecondPoint.SetPnt(
elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.myRubberLine.SetPoints(self.myFirstPoint, self.mySecondPoint)
self.myContext.Redisplay(self.myRubberLine, True)
def CancelEvent(self):
if self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Nothing:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_CenterPoint:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_RadiusPoint:
self.myContext.Remove(self.myRubberCircle, True)
self.myContext.Remove(self.myRubberLine, True)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Nothing
def GetTypeOfMethod(self):
return Sketch_ObjectTypeOfMethod.CircleCenterRadius_Method
##Copyright 2009-2014 Jelle Feringa ([email protected]) ## ##This file is part of pythonOCC. ## ##pythonOCC is free software: you can redistribute it and/or modify ##it under the terms of the GNU Lesser General Public License as published by ##the Free Software Foundation, either version 3 of the License, or ##(at your option) any later version. ## ##pythonOCC is distributed in the hope that it will be useful, ##but WITHOUT ANY WARRANTY; without even the implied warranty of ##MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ##GNU Lesser General Public License for more details. ## ##You should have received a copy of the GNU Lesser General Public License ##along with pythonOCC. If not, see <http://www.gnu.org/licenses/>. from __future__ import print_function from OCC.Core.gp import gp_Pnt2d, gp_Pnt, gp_Circ2d, gp_Ax2d from OCC.Core.Geom import Geom_Circle from OCC.Core.TColgp import TColgp_Array1OfPnt from OCC.Display.SimpleGui import init_display from OCC.Core.Convert import Convert_CircleToBSplineCurve, Convert_TgtThetaOver2 display, start_display, add_menu, add_function_to_menu = init_display() circle = Geom_Circle(gp_Circ2d(gp_Ax2d(), 1.0)) display.DisplayShape(circle, update=True, color='RED') start_display()
obj.display.DisplayShape(rim_v, color="BLUE")
print(api.GaussianCurvature())
print(api.MinCurvature(), api.MeanCurvature(), api.MaxCurvature())
print(dir_to_vec(api.Normal()))
du, dv = gp_Dir(), gp_Dir()
api.TangentU(du)
api.TangentV(dv)
print(dir_to_vec(du))
print(dir_to_vec(dv))
dx, dy = gp_Dir(), gp_Dir()
api.CurvatureDirections(dx, dy)
print(dir_to_vec(dx))
print(dir_to_vec(dy))
axs_x = gp_Ax3(pnt, dx, api.Normal())
axs_x = obj.prop_axs(axs_x, -np.abs(1 / api.MaxCurvature()), xyz="x")
rim_x = Geom_TrimmedCurve(Geom_Circle(axs_x.Ax2(), np.abs(1 / api.MaxCurvature())),
-np.pi / 2 / 10, np.pi / 2 / 10)
# obj.display.DisplayShape(rim_x)
axs_y = gp_Ax3(pnt, dy, api.Normal())
axs_y = obj.prop_axs(axs_y, -np.abs(1 / api.MinCurvature()), xyz="x")
rim_y = Geom_TrimmedCurve(Geom_Circle(axs_y.Ax2(), np.abs(1 / api.MinCurvature())),
-np.pi / 2 / 10, np.pi / 2 / 10)
# obj.display.DisplayShape(rim_y)
obj.show_axs_pln(ax0, scale=100, name="axis-0")
obj.show_axs_pln(ax1, scale=100, name="axis-1")
obj.show_axs_pln(ax2, scale=25, name="axis-2")
obj.display.DisplayShape(surf, color="BLUE", transparency=0.9)
obj.show_axs_pln(scale=100)
obj.show()
def _circle(radius) -> Curve:
return Curve(Geom_Circle(gp.XOY(), radius))
class Sketch_CommandNurbCircleSquare(Sketch_Command):
def __init__(self):
super(Sketch_CommandNurbCircleSquare, self).__init__("NURBS Circle.")
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Nothing
self.radius = 0.0
self.tempGeom_Circle = Geom_Circle(self.curCoordinateSystem.Ax2(),
SKETCH_RADIUS)
self.myRubberCircle = AIS_Circle(self.tempGeom_Circle)
self.myRubberCircle.SetColor(Quantity_Color(Quantity_NOC_BLUE1))
self.myCircleAx2d = gp_Ax2d()
def Action(self):
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Input_CenterPoint
self.tempGeom_Circle.SetAxis(self.curCoordinateSystem.Axis())
# if self.curCoordinateSystem.XDirection():
# self.myCircleAx2d.SetDirection(gp_Dir2d(self.curCoordinateSystem.XDirection().X(), self.curCoordinateSystem.XDirection().Y()))
def MouseInputEvent(self, thePnt2d: gp_Pnt2d, buttons, modifier):
if self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Nothing:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_CenterPoint:
self.curPnt2d = self.myAnalyserSnap.MouseInput(thePnt2d)
self.myFirstgp_Pnt2d = gp_Pnt2d(self.curPnt2d.X(),
self.curPnt2d.Y())
self.myFirstPoint.SetPnt(
elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.myCircleAx2d.SetLocation(self.myFirstgp_Pnt2d)
self.tempGeom_Circle.SetLocation(self.myFirstPoint.Pnt())
self.tempGeom_Circle.SetRadius(SKETCH_RADIUS)
self.myRubberCircle.SetCircle(self.tempGeom_Circle)
self.myContext.Display(self.myRubberCircle, True)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Input_RadiusPoint
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_RadiusPoint:
self.curPnt2d = self.myAnalyserSnap.MouseInputException(
self.myFirstgp_Pnt2d, thePnt2d, TangentType.Circle_CenterPnt,
True)
self.radius = self.myFirstgp_Pnt2d.Distance(self.curPnt2d)
self.tempGeom2d_Circle = Geom2d_Circle.DownCast(
geomapi_To2d(self.tempGeom_Circle,
gp_Pln(self.curCoordinateSystem)))
self.myContext.Remove(self.myRubberCircle, True)
nurbs = self.ToNurbs_Square(self.myFirstgp_Pnt2d, self.radius)
self.bspline_node = BsplineNode(nurbs.GetName(), self.rootNode)
self.bspline_node.setSketchObject(nurbs)
self.AddObject(self.tempGeom2d_Circle, nurbs.GetAIS_Object(),
Sketch_GeometryType.CircleSketchObject)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Nothing
return False
def MouseMoveEvent(self, thePnt2d: gp_Pnt2d, buttons, modifiers):
if self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Nothing:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_CenterPoint:
self.curPnt2d = self.myAnalyserSnap.MouseMove(thePnt2d)
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_RadiusPoint:
self.curPnt2d = self.myAnalyserSnap.MouseMoveException(
self.myFirstgp_Pnt2d, thePnt2d, TangentType.Circle_CenterPnt,
True)
self.radius = self.myFirstgp_Pnt2d.Distance(self.curPnt2d)
if self.radius == 0.0:
self.radius = 1.0
self.tempGeom_Circle.SetRadius(self.radius)
self.myContext.Redisplay(self.myRubberCircle, True)
self.mySecondPoint.SetPnt(
elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
# self.myRubberLine.SetPoints(self.myFirstPoint, self.mySecondPoint)
# self.myContext.Redisplay(self.myRubberLine, True)
def CancelEvent(self):
if self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Nothing:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_CenterPoint:
pass
elif self.myCircleCenterRadiusAction == CircleCenterRadiusAction.Input_RadiusPoint:
self.myContext.Remove(self.myRubberCircle, True)
self.myCircleCenterRadiusAction = CircleCenterRadiusAction.Nothing
def GetTypeOfMethod(self):
return Sketch_ObjectTypeOfMethod.NurbsCircleSquare_Method
def ToNurbs_Square(self, center: gp_Pnt2d, radius: float):
nurbsCircle = Sketch_Bspline(self.myContext, self.curCoordinateSystem)
# calculate the 9 vertices of square that can enclose circle
# top
nurbsCircle.AddPoles(gp_Pnt2d(center.X(), center.Y() + radius))
# right top
nurbsCircle.AddPoles(gp_Pnt2d(center.X() + radius,
center.Y() + radius))
# right
nurbsCircle.AddPoles(gp_Pnt2d(center.X() + radius, center.Y()))
# right bottom
nurbsCircle.AddPoles(gp_Pnt2d(center.X() + radius,
center.Y() - radius))
# bottom
nurbsCircle.AddPoles(gp_Pnt2d(center.X(), center.Y() - radius))
# left bottom
nurbsCircle.AddPoles(gp_Pnt2d(center.X() - radius,
center.Y() - radius))
# left
nurbsCircle.AddPoles(gp_Pnt2d(center.X() - radius, center.Y()))
# left top
nurbsCircle.AddPoles(gp_Pnt2d(center.X() - radius,
center.Y() + radius))
# top
nurbsCircle.AddPoles(gp_Pnt2d(center.X(), center.Y() + radius))
weights = [
1, 2**0.5 / 2, 1, 2**0.5 / 2, 1, 2**0.5 / 2, 1, 2**0.5 / 2, 1
]
knots = [0, 1, 2, 3, 4]
multiplicity = [3, 2, 2, 2, 3]
nurbsCircle.SetWeights(weights)
nurbsCircle.SetKnots(knots)
nurbsCircle.SetMultiplicities(multiplicity)
nurbsCircle.SetDegree(2)
nurbsCircle.Compute()
return nurbsCircle
class Sketch_CommandArc3P(Sketch_Command):
def __init__(self):
super(Sketch_CommandArc3P, self).__init__("Arc3P.")
self.myArc3PAction = Arc3PAction.Nothing
self.tempGeom_Circle = Geom_Circle(self.curCoordinateSystem.Ax2(), SKETCH_RADIUS)
self.myRubberCircle = AIS_Circle(self.tempGeom_Circle)
self.myRubberCircle.SetColor(Quantity_Color(Quantity_NOC_LIGHTPINK1))
self.temp2d_Circ = gp_Circ2d()
self.temp_Circ = gp_Circ(self.curCoordinateSystem.Ax2(), SKETCH_RADIUS)
self.temp2dAdaptor_Curve = Geom2dAdaptor_Curve()
self.mySecondgp_Pnt2d = gp.Origin2d()
self.third_Pnt = gp.Origin()
self.midpoint2d = gp.Origin2d()
self.tempu1_pnt2d = gp.Origin2d()
self.tempu2_pnt2d = gp.Origin2d()
self.tempGeom2d_Line = Geom2d_Line(self.tempu1_pnt2d, gp.DX2d())
self.tempGeom2d_Circle = Geom2d_Circle(self.temp2d_Circ)
self.FirstGeom2d_Point = Geom2d_CartesianPoint(self.tempu1_pnt2d)
self.TempGeom2d_Point = Geom2d_CartesianPoint(self.tempu2_pnt2d)
self.u1 =0
self.u2 = 0
self.temp_u1=0
self.temp_u2 = 0
self.dist1=0
self.dist2 = 0
def Action(self):
self.myArc3PAction = Arc3PAction.Input_1ArcPoint
self.temp_Circ.SetPosition(self.curCoordinateSystem.Ax2())
def MouseInputEvent(self, thePnt2d: gp_Pnt2d, buttons, modifier):
self.curPnt2d = self.myAnalyserSnap.MouseInput(thePnt2d)
if self.myArc3PAction == Arc3PAction.Nothing:
pass
elif self.myArc3PAction == Arc3PAction.Input_1ArcPoint:
self.myFirstgp_Pnt2d = gp_Pnt2d(self.curPnt2d.X(),self.curPnt2d.Y())
self.myFirstPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
if not self.myPolylineMode:
self.myRubberLine.SetPoints(self.myFirstPoint, self.myFirstPoint)
self.myContext.Display(self.myRubberLine, True)
self.myArc3PAction = Arc3PAction.Input_2ArcPoint
else:
self.findlastSObject()
self.myContext.Display(self.myRubberCircle, True)
elif self.myArc3PAction == Arc3PAction.Input_2ArcPoint:
self.mySecondgp_Pnt2d = gp_Pnt2d(self.curPnt2d.X(),self.curPnt2d.Y())
self.mySecondPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.temp_Circ.SetLocation(self.myFirstPoint.Pnt().Scaled(self.mySecondPoint.Pnt(), 0.5))
self.temp_Circ.SetRadius(self.myFirstgp_Pnt2d.Distance(self.curPnt2d) / 2)
self.tempGeom_Circle.SetCirc(self.temp_Circ)
self.myRubberCircle.SetCircle(self.tempGeom_Circle)
self.u1 = elclib.Parameter(self.temp_Circ, self.myFirstPoint.Pnt())
self.u2 = elclib.Parameter(self.temp_Circ, self.mySecondPoint.Pnt())
if self.u1 > self.u2:
self.myRubberCircle.SetFirstParam(self.u2)
self.myRubberCircle.SetLastParam(self.u1)
else:
self.myRubberCircle.SetFirstParam(self.u1)
self.myRubberCircle.SetLastParam(self.u2)
self.myContext.Remove(self.myRubberLine, True)
self.myContext.Display(self.myRubberCircle, True)
self.myContext.Redisplay(self.myRubberCircle, True)
self.myArc3PAction = Arc3PAction.Input_3ArcPoint
elif self.myArc3PAction == Arc3PAction.Input_3ArcPoint:
Geom2d_Point1 = Geom2d_CartesianPoint(self.myFirstgp_Pnt2d)
Geom2d_Point2 = Geom2d_CartesianPoint(self.mySecondgp_Pnt2d)
Geom2d_Point3 = Geom2d_CartesianPoint(self.curPnt2d)
tempGcc_Circ2d3Tan = Geom2dGcc_Circ2d3Tan(Geom2d_Point1, Geom2d_Point2, Geom2d_Point3, 1.0e-10)
if tempGcc_Circ2d3Tan.IsDone() and tempGcc_Circ2d3Tan.NbSolutions() > 0:
myGeom2d_Arc = Geom2d_Arc(tempGcc_Circ2d3Tan.ThisSolution(1))
myGeom2d_Arc.SetParam(self.myFirstgp_Pnt2d, self.mySecondgp_Pnt2d, self.curPnt2d)
Geom_Circle1 = Geom_Circle(elclib.To3d(self.curCoordinateSystem.Ax2(), myGeom2d_Arc.Circ2d()))
myAIS_Circle = AIS_Circle(Geom_Circle1)
myAIS_Circle.SetFirstParam(myGeom2d_Arc.FirstParameter())
myAIS_Circle.SetLastParam(myGeom2d_Arc.LastParameter())
self.AddObject(myGeom2d_Arc, myAIS_Circle, Sketch_GeometryType.ArcSketchObject)
self.myContext.Remove(self.myRubberCircle, True)
self.myContext.Display(myAIS_Circle, True)
self.myArc3PAction = Arc3PAction.Input_1ArcPoint
# self.third_Pnt = elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d)
# tempMakeCirc = gce_MakeCirc(self.myFirstPoint.Pnt(), self.mySecondPoint.Pnt(), self.third_Pnt)
# if tempMakeCirc.Status() == gce_Done:
#
# Geom_Circle1 = Geom_Circle(tempMakeCirc.Value())
# myAIS_Circle = AIS_Circle(Geom_Circle1)
#
# myAIS_Circle.SetFirstParam(
# elclib.Parameter(Geom_Circle1.Circ(), self.myFirstPoint.Pnt()))
# myAIS_Circle.SetLastParam(elclib.Parameter(Geom_Circle1.Circ(), self.third_Pnt))
#
# self.AddObject(Geom_Circle, myAIS_Circle, Sketch_ObjectTypeOfMethod.Arc3P_Method)
# self.myContext.Remove(self.myRubberCircle, True)
# self.myContext.Display(myAIS_Circle, True)
# self.myArc3PAction = Arc3PAction.Input_1ArcPoint
elif self.myArc3PAction == Arc3PAction.Input_PolylineArc:
self.TempGeom2d_Point.SetPnt2d(self.curPnt2d)
temp2d_QualifiedCurve = Geom2dGcc_QualifiedCurve(self.temp2dAdaptor_Curve, gccent_Unqualified)
tempGcc_Circ2d3Tan = Geom2dGcc_Circ2d3Tan(temp2d_QualifiedCurve, self.FirstGeom2d_Point,
self.TempGeom2d_Point, 1.0e-6, 0)
if (tempGcc_Circ2d3Tan.IsDone() and tempGcc_Circ2d3Tan.NbSolutions() > 0):
self.temp2d_Circ = tempGcc_Circ2d3Tan.ThisSolution(1)
self.u1 = elclib.Parameter(self.temp2d_Circ, self.myFirstgp_Pnt2d)
self.u2 = elclib.Parameter(self.temp2d_Circ, self.curPnt2d)
self.temp_u1 = self.u1 + (self.u2 - self.u1) / 100
self.temp_u2 = self.u1 - (self.u2 - self.u1) / 100
self.tempu1_pnt2d = elclib.Value(self.temp_u1, self.temp2d_Circ)
self.tempu2_pnt2d = elclib.Value(self.temp_u2, self.temp2d_Circ)
self.dist1 = self.tempu1_pnt2d.Distance(self.midpoint2d)
self.dist2 = self.tempu2_pnt2d.Distance(self.midpoint2d)
if self.dist1 < self.dist2:
self.tempu1_pnt2d = self.tempu2_pnt2d
myGeom2d_Arc = Geom2d_Arc(self.temp2d_Circ)
myGeom2d_Arc.SetParam(self.myFirstgp_Pnt2d, self.tempu1_pnt2d, self.curPnt2d)
Geom_Circle1 = Geom_Circle(elclib.To3d(self.curCoordinateSystem.Ax2(), myGeom2d_Arc.Circ2d()))
myAIS_Circle = AIS_Circle(Geom_Circle1)
myAIS_Circle.SetFirstParam(myGeom2d_Arc.FirstParameter())
myAIS_Circle.SetLastParam(myGeom2d_Arc.LastParameter())
self.myContext.Display(myAIS_Circle, True)
self.AddObject(myGeom2d_Arc, myAIS_Circle, Sketch_GeometryType.ArcSketchObject)
self.midpoint2d = myGeom2d_Arc.MiddlePnt()
self.tempGeom2d_Circle.SetCirc2d(myGeom2d_Arc.Circ2d())
self.temp2dAdaptor_Curve.Load(self.tempGeom2d_Circle)
self.myFirstgp_Pnt2d = self.curPnt2d
self.FirstGeom2d_Point.SetPnt2d(self.myFirstgp_Pnt2d)
self.myFirstPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.tempGeom_Circle.SetRadius(0)
self.myRubberCircle.SetCircle(self.tempGeom_Circle)
self.myContext.Redisplay(self.myRubberCircle, True)
return False
def MouseMoveEvent(self, thePnt2d: gp_Pnt2d, buttons, modifiers):
self.curPnt2d = self.myAnalyserSnap.MouseMove(thePnt2d)
if self.myArc3PAction == Arc3PAction.Nothing:
pass
elif self.myArc3PAction == Arc3PAction.Input_1ArcPoint:
self.curPnt2d = self.myAnalyserSnap.MouseMove(thePnt2d)
elif self.myArc3PAction == Arc3PAction.Input_2ArcPoint:
self.mySecondPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.myRubberLine.SetPoints(self.myFirstPoint, self.mySecondPoint)
self.myContext.Redisplay(self.myRubberLine, True)
elif self.myArc3PAction == Arc3PAction.Input_3ArcPoint:
self.third_Pnt = elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d)
tempMakeCirc = gce_MakeCirc(self.myFirstPoint.Pnt(), self.mySecondPoint.Pnt(), self.third_Pnt)
if tempMakeCirc.Status() == gce_Done:
self.tempGeom_Circle.SetCirc(tempMakeCirc.Value())
self.myRubberCircle.SetCircle(self.tempGeom_Circle)
self.myRubberCircle.SetFirstParam(
elclib.Parameter(self.tempGeom_Circle.Circ(), self.myFirstPoint.Pnt()))
self.myRubberCircle.SetLastParam(elclib.Parameter(self.tempGeom_Circle.Circ(), self.third_Pnt))
self.myContext.Redisplay(self.myRubberCircle, True)
elif self.myArc3PAction == Arc3PAction.Input_PolylineArc:
self.third_Pnt = elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d)
self.TempGeom2d_Point.SetPnt2d(self.curPnt2d)
temp2d_QualifiedCurve = Geom2dGcc_QualifiedCurve(self.temp2dAdaptor_Curve, gccent_Unqualified)
tempGcc_Circ2d3Tan = Geom2dGcc_Circ2d3Tan(temp2d_QualifiedCurve, self.FirstGeom2d_Point,
self.TempGeom2d_Point, 1.0e-6, 0)
if (tempGcc_Circ2d3Tan.IsDone() and tempGcc_Circ2d3Tan.NbSolutions() > 0):
self.temp2d_Circ = tempGcc_Circ2d3Tan.ThisSolution(1)
self.u1 = elclib.Parameter(self.temp2d_Circ, self.myFirstgp_Pnt2d)
self.u2 = elclib.Parameter(self.temp2d_Circ, self.mySecondgp_Pnt2d)
self.temp_u1 = self.u1 + (self.u2 - self.u1) / 100
self.temp_u2 = self.u1 - (self.u2 - self.u1) / 100
self.tempu1_pnt2d = elclib.Value(self.temp_u1, self.temp2d_Circ)
self.tempu2_pnt2d = elclib.Value(self.temp_u2, self.temp2d_Circ)
self.dist1 = self.tempu1_pnt2d.Distance(self.midpoint2d)
self.dist2 = self.tempu2_pnt2d.Distance(self.midpoint2d)
if self.dist1 < self.dist2:
self.tempu1_pnt2d = self.tempu2_pnt2d
tempMakeCirc = gce_MakeCirc(self.myFirstPoint.Pnt(),
elclib.To3d(self.curCoordinateSystem.Ax2(), self.tempu1_pnt2d),
self.third_Pnt)
if tempMakeCirc.Status() == gce_Done:
self.tempGeom_Circle.SetCirc(tempMakeCirc.Value())
self.myRubberCircle.SetFirstParam(
elclib.Parameter(self.tempGeom_Circle.Circ(), self.myFirstPoint.Pnt()))
self.myRubberCircle.SetLastParam(elclib.Parameter(self.tempGeom_Circle.Circ(), self.third_Pnt))
self.myContext.Redisplay(self.myRubberCircle, True)
def CancelEvent(self):
if self.myArc3PAction == Arc3PAction.Nothing:
pass
elif self.myArc3PAction == Arc3PAction.Input_1ArcPoint:
pass
elif self.myArc3PAction == Arc3PAction.Input_2ArcPoint:
self.myContext.Remove(self.myRubberLine, True)
elif self.myArc3PAction == Arc3PAction.Input_3ArcPoint:
self.myContext.Remove(self.myRubberCircle, True)
elif self.myArc3PAction == Arc3PAction.Input_PolylineArc:
self.myContext.Remove(self.myRubberCircle, True)
self.myArc3PAction = Arc3PAction.Nothing
def findlastSObject(self):
self.midpoint2d = gp.Origin2d()
if len(self.data) > 0:
lastSObject: Sketch_Object = self.data[-1]
if lastSObject.GetGeometryType() == Sketch_GeometryType.LineSketchObject:
last2d_Edge: Geom2d_Edge = lastSObject.GetGeometry()
if last2d_Edge.GetStart_Pnt().IsEqual(self.myFirstgp_Pnt2d, 1.0e-6) or last2d_Edge.GetEnd_Pnt().IsEqual(
self.myFirstgp_Pnt2d, 1.0e-6):
self.midpoint2d = last2d_Edge.MiddlePnt()
self.tempGeom2d_Line.SetLin2d(last2d_Edge.Lin2d())
self.temp2dAdaptor_Curve.Load(self.tempGeom2d_Line)
else:
self.setTempLine()
elif lastSObject.GetGeometryType() == Sketch_GeometryType.ArcSketchObject:
last2d_Arc: Geom2d_Arc = lastSObject.GetGeometry()
if last2d_Arc.FirstPnt().IsEqual(self.myFirstgp_Pnt2d, 1.0e-6) or last2d_Arc.LastPnt().IsEqual(
self.myFirstgp_Pnt2d, 1.0e-6):
self.midpoint2d = last2d_Arc.MiddlePnt()
self.tempGeom2d_Circle.SetCirc2d(last2d_Arc.Circ2d())
self.temp2dAdaptor_Curve.Load(self.tempGeom2d_Circle)
else:
self.setTempLine()
else:
self.setTempLine()
else:
self.setTempLine()
self.FirstGeom2d_Point.SetPnt2d(self.myFirstgp_Pnt2d)
self.tempGeom_Circle.SetRadius(0.0)
self.myRubberCircle.SetCircle(self.tempGeom_Circle)
self.myArc3PAction = Arc3PAction.Input_PolylineArc
def SetPolylineFirstPnt(self, p1):
self.myFirstgp_Pnt2d = p1
self.myFirstPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), p1))
self.findlastSObject()
self.myContext.Display(self.myRubberCircle, True)
def GetPolylineFirstPnt(self, p1):
if self.myArc3PAction == Arc3PAction.Input_PolylineArc and self.myPolylineMode == True:
p1 = self.myFirstgp_Pnt2d
return True
else:
return False
def SetPolylineMode(self, mode):
self.myPolylineMode = mode
if self.myArc3PAction == Arc3PAction.Nothing:
pass
elif self.myArc3PAction == Arc3PAction.Input_1ArcPoint:
pass
elif self.myArc3PAction == Arc3PAction.Input_2ArcPoint:
self.findlastSObject()
self.myContext.Remove(self.myRubberLine, True)
self.myContext.Display(self.myRubberCircle, True)
elif self.myArc3PAction == Arc3PAction.Input_3ArcPoint:
self.findlastSObject()
self.myContext.Redisplay(self.myRubberCircle, True)
elif self.myArc3PAction == Arc3PAction.Input_PolylineArc:
self.mySecondPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.myContext.Remove(self.myRubberCircle, True)
self.myContext.Display(self.myRubberLine, True)
self.myArc3PAction = Arc3PAction.Input_2ArcPoint
def setTempLine(self):
self.tempGeom2d_Line.SetLocation(self.myFirstgp_Pnt2d)
self.tempGeom2d_Line.SetDirection(gp.DX2d())
self.temp2dAdaptor_Curve.Load(self.tempGeom2d_Line)
def GetTypeOfMethod(self):
return Sketch_ObjectTypeOfMethod.Arc3P_Method
def MouseInputEvent(self, thePnt2d: gp_Pnt2d, buttons, modifier):
self.curPnt2d = self.myAnalyserSnap.MouseInput(thePnt2d)
if self.myArc3PAction == Arc3PAction.Nothing:
pass
elif self.myArc3PAction == Arc3PAction.Input_1ArcPoint:
self.myFirstgp_Pnt2d = gp_Pnt2d(self.curPnt2d.X(),self.curPnt2d.Y())
self.myFirstPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
if not self.myPolylineMode:
self.myRubberLine.SetPoints(self.myFirstPoint, self.myFirstPoint)
self.myContext.Display(self.myRubberLine, True)
self.myArc3PAction = Arc3PAction.Input_2ArcPoint
else:
self.findlastSObject()
self.myContext.Display(self.myRubberCircle, True)
elif self.myArc3PAction == Arc3PAction.Input_2ArcPoint:
self.mySecondgp_Pnt2d = gp_Pnt2d(self.curPnt2d.X(),self.curPnt2d.Y())
self.mySecondPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.temp_Circ.SetLocation(self.myFirstPoint.Pnt().Scaled(self.mySecondPoint.Pnt(), 0.5))
self.temp_Circ.SetRadius(self.myFirstgp_Pnt2d.Distance(self.curPnt2d) / 2)
self.tempGeom_Circle.SetCirc(self.temp_Circ)
self.myRubberCircle.SetCircle(self.tempGeom_Circle)
self.u1 = elclib.Parameter(self.temp_Circ, self.myFirstPoint.Pnt())
self.u2 = elclib.Parameter(self.temp_Circ, self.mySecondPoint.Pnt())
if self.u1 > self.u2:
self.myRubberCircle.SetFirstParam(self.u2)
self.myRubberCircle.SetLastParam(self.u1)
else:
self.myRubberCircle.SetFirstParam(self.u1)
self.myRubberCircle.SetLastParam(self.u2)
self.myContext.Remove(self.myRubberLine, True)
self.myContext.Display(self.myRubberCircle, True)
self.myContext.Redisplay(self.myRubberCircle, True)
self.myArc3PAction = Arc3PAction.Input_3ArcPoint
elif self.myArc3PAction == Arc3PAction.Input_3ArcPoint:
Geom2d_Point1 = Geom2d_CartesianPoint(self.myFirstgp_Pnt2d)
Geom2d_Point2 = Geom2d_CartesianPoint(self.mySecondgp_Pnt2d)
Geom2d_Point3 = Geom2d_CartesianPoint(self.curPnt2d)
tempGcc_Circ2d3Tan = Geom2dGcc_Circ2d3Tan(Geom2d_Point1, Geom2d_Point2, Geom2d_Point3, 1.0e-10)
if tempGcc_Circ2d3Tan.IsDone() and tempGcc_Circ2d3Tan.NbSolutions() > 0:
myGeom2d_Arc = Geom2d_Arc(tempGcc_Circ2d3Tan.ThisSolution(1))
myGeom2d_Arc.SetParam(self.myFirstgp_Pnt2d, self.mySecondgp_Pnt2d, self.curPnt2d)
Geom_Circle1 = Geom_Circle(elclib.To3d(self.curCoordinateSystem.Ax2(), myGeom2d_Arc.Circ2d()))
myAIS_Circle = AIS_Circle(Geom_Circle1)
myAIS_Circle.SetFirstParam(myGeom2d_Arc.FirstParameter())
myAIS_Circle.SetLastParam(myGeom2d_Arc.LastParameter())
self.AddObject(myGeom2d_Arc, myAIS_Circle, Sketch_GeometryType.ArcSketchObject)
self.myContext.Remove(self.myRubberCircle, True)
self.myContext.Display(myAIS_Circle, True)
self.myArc3PAction = Arc3PAction.Input_1ArcPoint
# self.third_Pnt = elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d)
# tempMakeCirc = gce_MakeCirc(self.myFirstPoint.Pnt(), self.mySecondPoint.Pnt(), self.third_Pnt)
# if tempMakeCirc.Status() == gce_Done:
#
# Geom_Circle1 = Geom_Circle(tempMakeCirc.Value())
# myAIS_Circle = AIS_Circle(Geom_Circle1)
#
# myAIS_Circle.SetFirstParam(
# elclib.Parameter(Geom_Circle1.Circ(), self.myFirstPoint.Pnt()))
# myAIS_Circle.SetLastParam(elclib.Parameter(Geom_Circle1.Circ(), self.third_Pnt))
#
# self.AddObject(Geom_Circle, myAIS_Circle, Sketch_ObjectTypeOfMethod.Arc3P_Method)
# self.myContext.Remove(self.myRubberCircle, True)
# self.myContext.Display(myAIS_Circle, True)
# self.myArc3PAction = Arc3PAction.Input_1ArcPoint
elif self.myArc3PAction == Arc3PAction.Input_PolylineArc:
self.TempGeom2d_Point.SetPnt2d(self.curPnt2d)
temp2d_QualifiedCurve = Geom2dGcc_QualifiedCurve(self.temp2dAdaptor_Curve, gccent_Unqualified)
tempGcc_Circ2d3Tan = Geom2dGcc_Circ2d3Tan(temp2d_QualifiedCurve, self.FirstGeom2d_Point,
self.TempGeom2d_Point, 1.0e-6, 0)
if (tempGcc_Circ2d3Tan.IsDone() and tempGcc_Circ2d3Tan.NbSolutions() > 0):
self.temp2d_Circ = tempGcc_Circ2d3Tan.ThisSolution(1)
self.u1 = elclib.Parameter(self.temp2d_Circ, self.myFirstgp_Pnt2d)
self.u2 = elclib.Parameter(self.temp2d_Circ, self.curPnt2d)
self.temp_u1 = self.u1 + (self.u2 - self.u1) / 100
self.temp_u2 = self.u1 - (self.u2 - self.u1) / 100
self.tempu1_pnt2d = elclib.Value(self.temp_u1, self.temp2d_Circ)
self.tempu2_pnt2d = elclib.Value(self.temp_u2, self.temp2d_Circ)
self.dist1 = self.tempu1_pnt2d.Distance(self.midpoint2d)
self.dist2 = self.tempu2_pnt2d.Distance(self.midpoint2d)
if self.dist1 < self.dist2:
self.tempu1_pnt2d = self.tempu2_pnt2d
myGeom2d_Arc = Geom2d_Arc(self.temp2d_Circ)
myGeom2d_Arc.SetParam(self.myFirstgp_Pnt2d, self.tempu1_pnt2d, self.curPnt2d)
Geom_Circle1 = Geom_Circle(elclib.To3d(self.curCoordinateSystem.Ax2(), myGeom2d_Arc.Circ2d()))
myAIS_Circle = AIS_Circle(Geom_Circle1)
myAIS_Circle.SetFirstParam(myGeom2d_Arc.FirstParameter())
myAIS_Circle.SetLastParam(myGeom2d_Arc.LastParameter())
self.myContext.Display(myAIS_Circle, True)
self.AddObject(myGeom2d_Arc, myAIS_Circle, Sketch_GeometryType.ArcSketchObject)
self.midpoint2d = myGeom2d_Arc.MiddlePnt()
self.tempGeom2d_Circle.SetCirc2d(myGeom2d_Arc.Circ2d())
self.temp2dAdaptor_Curve.Load(self.tempGeom2d_Circle)
self.myFirstgp_Pnt2d = self.curPnt2d
self.FirstGeom2d_Point.SetPnt2d(self.myFirstgp_Pnt2d)
self.myFirstPoint.SetPnt(elclib.To3d(self.curCoordinateSystem.Ax2(), self.curPnt2d))
self.tempGeom_Circle.SetRadius(0)
self.myRubberCircle.SetCircle(self.tempGeom_Circle)
self.myContext.Redisplay(self.myRubberCircle, True)
return False