class oldtestZigbeeThread(threading.Thread):
def __init__(self, t, channel, whitelist, endtime, zigbeefile, thread_num=0, timeout=0.01):
super(oldtestZigbeeThread, self).__init__()
self.thread_num = thread_num
self.channel = channel
self.whitelist = whitelist
self.endtime = endtime
self.zigbeefile = zigbeefile
self.t = t
self.stopped = False
self.timeout = timeout
def run(self):
global q
self.zigbee = OldTestFunction(self.t, self.whitelist)
self.zigbee.end_time = self.endtime
self.zigbee.id_gen()
subthread = threading.Thread(target=self.zigbee.com_read, args=(q, self.channel, self.zigbeefile))
subthread.setDaemon(True)
subthread.start()
while not self.stopped:
subthread.join(self.timeout)
print ("Thread stopped")
def stop(self):
self.stopped = True
def isStopped(self):
return self.stopped
def start_test(self):
# open com
print self.com, self.channelID, self.timeout
self.oldui.startTest.setEnabled(False)
try:
check_result = self.check_config()
if check_result == False:
return
self.t = serial.Serial(str(self.com), 38400)
self.oldtest = OldTestFunction(self.t, self.device_list)
self.oldtest.init_Signal.connect(self.display_init)
self.oldtest.statusChange_Signal.connect(self.display_change)
self.oldtest.id_gen()
self.zigbee_thread = oldtestZigbeeThread(
self.t, self.channelID, self.device_list, self.end_time, self.zigbeefile
)
self.oldtest.ot_okSignal.connect(self.start_control)
self.oldtest.ot_terminalSignal.connect(self.terminal_test)
self.oldtest.ot_controltimesSignal.connect(self.lcd1_change)
self.oldtest.ot_endtimeSignal.connect(self.lcd2_change)
self.oldtest.ot_errSignal.connect(self.err_handle)
self.oldtest.control_times = self.control_times
self.oldtest.end_time = self.end_time
self.oldtest.timeout = self.timeout
self.wait_for_access()
self.zigbee_thread.start()
self.back_thread_start()
print "zfile:", self.zigbeefile
except Exception as e:
self.err_handle(u"测试出现异常，请检查相关配置")
self.terminal_test()
print e
def run(self):
global q
self.zigbee = OldTestFunction(self.t, self.whitelist)
self.zigbee.end_time = self.endtime
self.zigbee.id_gen()
subthread = threading.Thread(target=self.zigbee.com_read, args=(q, self.channel, self.zigbeefile))
subthread.setDaemon(True)
subthread.start()
while not self.stopped:
subthread.join(self.timeout)
print ("Thread stopped")
class OldTest(QtGui.QMainWindow):
def __init__(self, parent=None):
super(OldTest, self).__init__(parent)
self.oldui = Old_ui()
self.oldui.setupUi(self)
self.lcd1 = self.oldui.currentTimes
self.lcd2 = self.oldui.remainTime
self.tableWidget = self.oldui.tableWidget
self.old_settings = OldSettings()
self.oldui.oldSettings.clicked.connect(self.settings_show)
self.oldui.startTest.clicked.connect(self.start_test)
self.oldui.endTest.clicked.connect(self.terminal_test)
self.oldui.anaData.clicked.connect(self.save_anadata)
self.old_settings.old_signal.connect(self.change_settings)
self.timeout = 300
self.loseconnect = 300
self.com = "com1"
self.channelID = "17"
self.env_init()
def env_init(self):
self.control_times = ""
self.end_time = ""
self.device_list = ""
self.t = ""
fol = os.getcwd() + "/Log/"
if not os.path.exists(fol):
os.mkdir(fol)
self.reporttime = str(time.strftime("%Y%m%d%H%M%S", time.localtime()))
self.report_folder = os.getcwd() + "\\Report\\"
if not os.path.exists(self.report_folder):
os.makedirs(self.report_folder)
self.report_folder = self.report_folder + self.reporttime
if not os.path.exists(self.report_folder):
os.makedirs(self.report_folder)
self.zigbeefile = fol + "Zigbeelog" + time.strftime("%Y%m%d%H%M%S", time.localtime()) + ".txt"
def ana_zigbeefile(self):
try:
ofolder = self.report_folder + "\\oldtest\\"
readfile = self.zigbeefile
print "ana_file:", readfile
zipname = ofolder + "oldtest_" + str(time.strftime("%Y%m%d%H%M%S", time.localtime())) + ".zip"
cfg = ConfigAnalysis(readfile, ofolder)
get_content = cfg.GetDate(2)
result = cfg.GetAllErrByType(time_range=self.loseconnect)
cfg.WriteToExcel(result)
zip_folder(ofolder, zipname)
return zipname
except Exception as e:
print "ana_zigbeefile:", e
return False
def save_anadata(self):
tstr = u"是否分析本次老化测试结果"
close = QtGui.QMessageBox.question(self, "Message", tstr, QtGui.QMessageBox.Yes, QtGui.QMessageBox.No)
zipfile = self.ana_zigbeefile()
if close == QtGui.QMessageBox.Yes:
if zipfile == None:
tstr = u"无法分析结果，请检查是否成功开始测试！"
self.err_handle(tstr)
elif zipfile == False:
tstr = u"后台数据为空，请等待测试完成后进行分析！"
self.err_handle(tstr)
return
else:
s = QtGui.QFileDialog.getExistingDirectory()
save_folder = unicode(QtCore.QString(s)) + "\\oldtest" + self.reporttime
if not os.path.exists(save_folder):
os.makedirs(save_folder)
shutil.copy(zipfile, save_folder)
def change_settings(self, content):
self.control_times = content["control_times"]
self.end_time = content["end_time"]
self.device_list = content["device_list"]
print "aaa", self.control_times, self.end_time, list(self.device_list)
def settings_show(self):
self.old_settings.show()
def start_test(self):
# open com
print self.com, self.channelID, self.timeout
self.oldui.startTest.setEnabled(False)
try:
check_result = self.check_config()
if check_result == False:
return
self.t = serial.Serial(str(self.com), 38400)
self.oldtest = OldTestFunction(self.t, self.device_list)
self.oldtest.init_Signal.connect(self.display_init)
self.oldtest.statusChange_Signal.connect(self.display_change)
self.oldtest.id_gen()
self.zigbee_thread = oldtestZigbeeThread(
self.t, self.channelID, self.device_list, self.end_time, self.zigbeefile
)
self.oldtest.ot_okSignal.connect(self.start_control)
self.oldtest.ot_terminalSignal.connect(self.terminal_test)
self.oldtest.ot_controltimesSignal.connect(self.lcd1_change)
self.oldtest.ot_endtimeSignal.connect(self.lcd2_change)
self.oldtest.ot_errSignal.connect(self.err_handle)
self.oldtest.control_times = self.control_times
self.oldtest.end_time = self.end_time
self.oldtest.timeout = self.timeout
self.wait_for_access()
self.zigbee_thread.start()
self.back_thread_start()
print "zfile:", self.zigbeefile
except Exception as e:
self.err_handle(u"测试出现异常，请检查相关配置")
self.terminal_test()
print e
# start control
def back_thread_start(self):
global q
self.judge_loseconnect = threading.Thread(target=self.oldtest.judge_loseconnect, args=())
self.judge_loseconnect.start()
self.ana_data = threading.Thread(target=self.oldtest.ana_data, args=(q,))
self.ana_data.start()
def display_init(self, statusdict):
for i, j in statusdict.items():
for k in range(len(j) - 1):
item = self.tableWidget.item(int(j[0]), int(k))
item.setText(_translate("Form", str(j[k + 1]), None))
def display_change(self, statuslist):
for i in range(len(statuslist) - 1):
item = self.tableWidget.item(int(statuslist[0]), i)
item.setText(_translate("Form", str(statuslist[i + 1]), None))
def check_config(self):
if self.device_list == "" or (self.control_times == "" and self.end_time == ""):
self.err_handle(u"配置信息不正确，请正确填写配置信息后重新点击开始测试！")
return False
return True
def err_handle(self, tstr):
warning = QtGui.QMessageBox.warning(self, "Warning", tstr, QtGui.QMessageBox.Yes)
self.terminal_test()
def lcd1_change(self, tstr):
self.lcd1.display(tstr)
def lcd2_change(self, tstr):
self.lcd2.display(tstr)
def start_control(self, signal):
if signal == "ok":
tstr = u"设备已全部入网，是否开始控制测试"
confirm = QtGui.QMessageBox.question(self, "Message", tstr, QtGui.QMessageBox.Yes, QtGui.QMessageBox.No)
if confirm == QtGui.QMessageBox.Yes:
self.oldtest.start()
else:
# self.terminal_test()
pass
elif signal == "fail":
tstr = u"设备并未全部入网，是否开始控制测试"
confirm = QtGui.QMessageBox.question(self, "Message", tstr, QtGui.QMessageBox.Yes, QtGui.QMessageBox.No)
if confirm == QtGui.QMessageBox.Yes:
self.oldtest.start()
else:
# self.terminal_test()
pass
else:
pass
def wait_for_access(self):
global q
self.wait_thread = threading.Thread(target=self.oldtest.login_test, args=(q,))
self.wait_thread.start()
def terminal_test(self):
try:
print "endtest"
self.oldui.startTest.setEnabled(True)
self.t.close()
self.oldtest.stopflag = True
time.sleep(0.1)
self.zigbee_thread.stop()
self.zigbee_thread.join()
except Exception as e:
print e
def closeEvent(self, event):
try:
self.terminal_test()
except Exception as e:
print e
finally:
event.accept()