def main():
voltageRatioInput0 = VoltageRatioInput()
voltageRatioInput0.setIsHubPortDevice(True)
voltageRatioInput0.setHubPort(0)
print(*[x for x in voltageRatioInput0.__dir__() if "DataInterval" in x],
sep="\n")
voltageRatioInput0.setOnVoltageRatioChangeHandler(onVoltageRatioChange)
voltageRatioInput0.openWaitForAttachment(5000)
print(voltageRatioInput0.getMinDataInterval(),
voltageRatioInput0.getMaxDataInterval())
voltageRatioInput0.setDataInterval(100)
voltageRatioInput0.setSensorValueChangeTrigger(0.01)
try:
input("Press Enter to Stop\n")
except (Exception, KeyboardInterrupt):
pass
voltageRatioInput0.close()
class PneumaticFrame2:
def __init__(self, master, initial_name, top_name, color, sol, reg_pwr,
reg_set, reg_get, PSI):
self.frame = Frame(master, borderwidth=2, relief=SUNKEN, bg=color)
self.frame.pack()
self.master = master
self.frame_name = StringVar()
self.frame_name.set(initial_name)
self.state = 0
self.fontType = "Comic Sans"
self.activeColor = 'SpringGreen4'
self.frameColor = color
self.pressure = IntVar()
self.lock_flag = IntVar()
self.pressure.set("")
self.power = Button(self.frame,
text="PWR",
activebackground=self.activeColor,
command=lambda: self.toggle_pwr())
self.set_label = Button(self.frame,
text="SET LABEL",
font=(self.fontType, 7),
command=lambda: self.get_label_input())
self.observed_pressure = Entry(self.frame,
width=5,
state="readonly",
textvariable=self.pressure)
if self.frame_name.get() == "Hydro":
self.set_pressure_scale = Scale(self.frame,
orient=HORIZONTAL,
from_=0,
to=92,
resolution=0.5,
bg=color,
label="Set Pressure (PSI)",
highlightthickness=0,
command=self.set_pressure)
else:
self.set_pressure_scale = Scale(self.frame,
orient=HORIZONTAL,
from_=0,
to=50,
resolution=0.5,
bg=color,
label="Set Pressure (PSI)",
highlightthickness=0,
command=self.set_pressure)
self.custom_label = Label(self.frame,
textvariable=self.frame_name,
font=(self.fontType, 14),
bg=color)
self.label = Label(self.frame, text=initial_name, bg=color)
self.lock = Checkbutton(self.frame,
text="LOCK",
bg=color,
variable=self.lock_flag,
command=self.lock)
self.frame_name.set(top_name)
# Init the pressure scale to the default value.
self.set_pressure_scale.set(PSI)
# Lock hydo at startup
if initial_name == "Hydro":
self.lock.select()
self.set_pressure_scale.config(state="disabled")
self.power.config(state="disable")
self.frame.rowconfigure(0, minsize=30)
self.custom_label.grid(row=0, column=0, columnspan=2, sticky=S)
self.set_label.grid(column=0, row=1, columnspan=2)
self.frame.rowconfigure(2, minsize=50)
self.power.grid(column=0, row=2)
self.observed_pressure.grid(column=1, row=2)
self.set_pressure_scale.grid(column=0, row=3, columnspan=2, padx=20)
self.frame.rowconfigure(4, minsize=5)
self.label.grid(column=0, row=5)
self.lock.grid(column=1, row=5)
# Connect to Phidget Solid State Relay for solinoid control
if self.frame_name.get() == "Hydro":
self.solenoid_switch = DigitalOutput()
self.solenoid_switch.setDeviceSerialNumber(sol[0])
self.solenoid_switch.setIsHubPortDevice(False)
self.solenoid_switch.setHubPort(sol[1])
self.solenoid_switch.setChannel(sol[2])
self.solenoid_switch.openWaitForAttachment(5000)
#Connect to Phidget Solid State Relay for regulator power control
self.reg_switch = DigitalOutput()
self.reg_switch.setDeviceSerialNumber(reg_pwr[0])
self.reg_switch.setIsHubPortDevice(False)
self.reg_switch.setHubPort(reg_pwr[1])
self.reg_switch.setChannel(reg_pwr[2])
self.reg_switch.openWaitForAttachment(5000)
#Connect to Phidget Voltage Ouptut for pressure control
self.pressure_ctrl = VoltageOutput()
self.pressure_ctrl.setDeviceSerialNumber(reg_set[0])
self.pressure_ctrl.setIsHubPortDevice(False)
self.pressure_ctrl.setHubPort(reg_set[1])
self.pressure_ctrl.setChannel(reg_set[2])
self.pressure_ctrl.openWaitForAttachment(5000)
#Connect to Phidget Analog Input for pressure reading
self.pressure_reading = VoltageRatioInput()
self.pressure_reading.setDeviceSerialNumber(reg_get[0])
#One of the VINT Hubs on the SBC is used and needs special configuration
if reg_get[0] == SBCH:
self.pressure_reading.setIsHubPortDevice(True)
self.pressure_reading.setHubPort(0)
self.pressure_reading.setChannel(reg_get[1])
self.pressure_reading.openWaitForAttachment(5000)
def toggle_pwr(self):
#Turn on air channel
if self.state == 0:
#Turn on power to regulator and show active button color
self.power.config(bg=self.activeColor)
self.reg_switch.setState(True)
if self.frame_name.get() == "Hydro":
self.solenoid_switch.setState(True)
#Start monitoring air pressure
self.update_pressure()
#Change state of air channel
self.state = 1
#Turn off air channel
elif self.state == 1:
remember_state = self.set_pressure_scale.get()
if self.frame_name.get() != "Hydro":
messagebox.showinfo(
self.frame_name.get() + " Warning",
"Pressure will be set to zero. Acknowledge that " +
self.frame_name.get() + " is in a safe configuration")
# Change pressure to zero
self.set_pressure_scale.set(0)
self.set_pressure(0)
time.sleep(0.5)
self.frame.update()
self.reg_switch.setState(False)
time.sleep(0.5)
self.set_pressure_scale.set(remember_state)
if self.frame_name.get() == "Hydro":
self.solenoid_switch.setState(False)
self.lock.select()
self.set_pressure_scale.config(state="disabled")
self.power.config(state="disable")
#Turn off power to reguluator and remove active button color
self.power.config(bg="SystemButtonFace")
#Update air channel state
self.state = 0
def get_label_input(self):
self.window = popupWindow(self.master)
self.set_label.config(state=DISABLED)
self.master.wait_window(self.window.top)
self.set_label.config(state=NORMAL)
#If the user does not enter a value exception will be produced
try:
if len(self.window.value) > 12:
self.frame_name.set("SET ERROR")
else:
self.frame_name.set(self.window.value)
except:
self.frame_name.set("SET ERROR")
def set_pressure(self, val):
# Pressure Range
range = MAXPR - MINPR
# Calculate volts/PSI
ratio = 5 / range
self.pressure_ctrl.setVoltage(float(val) * ratio)
def update_pressure(self):
if self.reg_switch.getState():
try:
val = float(self.pressure_reading.getSensorValue())
PSI = val * 165.63 - 30.855
PSI = round(PSI, 2)
self.pressure.set(PSI)
#Low pressure check
if PSI < (self.set_pressure_scale.get() - 3):
if self.frame.cget('bg') == "Red":
self.frame.config(bg=self.frameColor)
self.set_pressure_scale.config(bg=self.frameColor)
self.custom_label.config(bg=self.frameColor)
self.label.config(bg=self.frameColor)
self.lock.config(bg=self.frameColor)
else:
self.frame.config(bg='Red')
self.set_pressure_scale.config(bg="Red")
self.custom_label.config(bg="Red")
self.label.config(bg="Red")
self.lock.config(bg="Red")
if PSI > (self.set_pressure_scale.get() - 3):
if self.frame.cget('bg') == "Red":
self.frame.config(bg=self.frameColor)
self.set_pressure_scale.config(bg=self.frameColor)
self.custom_label.config(bg=self.frameColor)
self.label.config(bg=self.frameColor)
self.lock.config(bg=self.frameColor)
except:
print("Init Air Pressure")
root.after(200, self.update_pressure)
else:
self.pressure.set("")
def lock(self):
if self.lock_flag.get() == True:
self.set_pressure_scale.config(state="disabled")
self.power.config(state="disable")
elif self.lock_flag.get() == False:
self.set_pressure_scale.config(state="normal")
self.power.config(state="normal")
def main():
"""
* Define how long the program runs for
"""
runtime = int(input("Measure for long long: ")) # seconds
"""
* Allocate a new Phidget Channel object
"""
ch = VoltageRatioInput()
ch2 = VoltageRatioInput()
ch3 = VoltageRatioInput()
ch4 = VoltageRatioInput()
"""
* Set matching parameters to specify which channel to open
"""
ch.setDeviceSerialNumber(533379)
ch.setIsHubPortDevice(False)
ch.setChannel(0)
ch2.setDeviceSerialNumber(533379)
ch2.setIsHubPortDevice(False)
ch2.setChannel(1)
ch3.setDeviceSerialNumber(533379)
ch3.setIsHubPortDevice(False)
ch3.setChannel(2)
ch4.setDeviceSerialNumber(533379)
ch4.setIsHubPortDevice(False)
ch4.setChannel(3)
"""
* Add event handlers before calling open so that no events are missed.
"""
print("\n--------------------------------------")
ch.setOnAttachHandler(onAttachHandler)
ch2.setOnAttachHandler(onAttachHandler)
ch3.setOnAttachHandler(onAttachHandler)
ch4.setOnAttachHandler(onAttachHandler)
ch.setOnDetachHandler(onDetachHandler)
ch2.setOnDetachHandler(onDetachHandler)
ch3.setOnDetachHandler(onDetachHandler)
ch4.setOnDetachHandler(onDetachHandler)
ch.setOnErrorHandler(onErrorHandler)
ch2.setOnErrorHandler(onErrorHandler)
ch3.setOnErrorHandler(onErrorHandler)
ch4.setOnErrorHandler(onErrorHandler)
ch.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
ch2.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler2)
ch3.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler3)
ch4.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler4)
"""
* Open the channel with a timeout
"""
print("\nOpening and Waiting for Attachment...")
ch.openWaitForAttachment(5000)
ch2.openWaitForAttachment(5000)
ch3.openWaitForAttachment(5000)
ch4.openWaitForAttachment(5000)
time.sleep(runtime)
"""
* Perform clean up and exit
"""
#clear the VoltageRatioChange event handler
ch.setOnVoltageRatioChangeHandler(None)
ch2.setOnVoltageRatioChangeHandler(None)
ch3.setOnVoltageRatioChangeHandler(None)
ch4.setOnVoltageRatioChangeHandler(None)
print("Cleaning up...")
ch.close()
ch2.close()
ch3.close()
ch4.close()
f1.close()
f2.close()
f3.close()
f4.close()
print("\nExiting...")
return 0
def main():
try:
"""
* Allocate a new Phidget Channel object
"""
ch = VoltageRatioInput()
"""
* Set matching parameters to specify which channel to open
"""
#You may remove this line and hard-code the addressing parameters to fit your application
channelInfo = AskForDeviceParameters(ch)
ch.setDeviceSerialNumber(channelInfo.deviceSerialNumber)
ch.setHubPort(channelInfo.hubPort)
ch.setIsHubPortDevice(channelInfo.isHubPortDevice)
ch.setChannel(channelInfo.channel)
if (channelInfo.netInfo.isRemote):
ch.setIsRemote(channelInfo.netInfo.isRemote)
if (channelInfo.netInfo.serverDiscovery):
try:
Net.enableServerDiscovery(
PhidgetServerType.PHIDGETSERVER_DEVICEREMOTE)
except PhidgetException as e:
PrintEnableServerDiscoveryErrorMessage(e)
raise EndProgramSignal(
"Program Terminated: EnableServerDiscovery Failed")
else:
Net.addServer("Server", channelInfo.netInfo.hostname,
channelInfo.netInfo.port,
channelInfo.netInfo.password, 0)
"""
* Add event handlers before calling open so that no events are missed.
"""
print("\n--------------------------------------")
print("\nSetting OnAttachHandler...")
ch.setOnAttachHandler(onAttachHandler)
print("Setting OnDetachHandler...")
ch.setOnDetachHandler(onDetachHandler)
print("Setting OnErrorHandler...")
ch.setOnErrorHandler(onErrorHandler)
#This call may be harmlessly removed
PrintEventDescriptions()
print("\nSetting OnVoltageRatioChangeHandler...")
ch.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
print("\nSetting OnSensorChangeHandler...")
ch.setOnSensorChangeHandler(onSensorChangeHandler)
"""
* Open the channel with a timeout
"""
print("\nOpening and Waiting for Attachment...")
try:
ch.openWaitForAttachment(5000)
except PhidgetException as e:
PrintOpenErrorMessage(e, ch)
raise EndProgramSignal("Program Terminated: Open Failed")
print("Sampling data for 10 seconds...")
print(
"You can do stuff with your Phidgets here and/or in the event handlers."
)
time.sleep(10)
"""
* Perform clean up and exit
"""
print("\nDone Sampling...")
print("Cleaning up...")
ch.close()
print("\nExiting...")
return 0
except PhidgetException as e:
sys.stderr.write("\nExiting with error(s)...")
DisplayError(e)
traceback.print_exc()
print("Cleaning up...")
ch.close()
return 1
except EndProgramSignal as e:
print(e)
print("Cleaning up...")
ch.close()
return 1
except RuntimeError as e:
sys.stderr.write("Runtime Error: \n\t" + e)
traceback.print_exc()
return 1
finally:
print("Press ENTER to end program.")
readin = sys.stdin.readline()
# New channel object
ch = VoltageRatioInput()
# Make directory and open file for writting
if not os.path.exists(LOG_FOLDER_NAME):
os.makedirs(LOG_FOLDER_NAME)
f = open(FILE_LOG_SESSION, "w+") # Overwrite
# Write CSV file header
f.write("Time, Time Since Begin, V/V Raw Data, Force \n")
ch.file = f
# Setup Phidget device parameters
ch.setDeviceSerialNumber(-1)
ch.setHubPort(-1)
ch.setIsHubPortDevice(False)
ch.setChannel(0)
print("\n--------------------------------------")
# Setup call back functions that is raised when voltage is changed
ch.setOnAttachHandler(onAttachHandler)
ch.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
# Open Phidget connection
ch.openWaitForAttachment(5000)
# Wait for user to press Enter to stop
print("Press Enter to stop recording")
readin = sys.stdin.readline(1)
ch.close()
def main():
global current, voltage, app, serverUpdateThread, hadPhidgetException, sessionFile
hadPhidgetException = False
voltage_sensor = None
current_sensor = None
serverUpdateThread = StoppableThread()
sessionNum = 0
with open("numSessions.txt", "r+") as numSessionsFile:
sessionNum = int(numSessionsFile.read()) + 1
print(sessionNum)
numSessionsFile.seek(0)
numSessionsFile.write(str(sessionNum))
numSessionsFile.truncate()
numSessionsFile.close()
timestamp = datetime.now()
sessionFile = open(
"Sessions/session" + str(sessionNum) + "_" + str(timestamp.month) +
"-" + str(timestamp.day) + "_" + str(timestamp.hour) + "-" +
str(timestamp.minute) + "-" + str(timestamp.second) + ".txt", "w+")
print("Session File created")
try:
voltage_sensor = VoltageInput()
current_sensor = VoltageRatioInput()
voltage_sensor.setHubPort(0)
voltage_sensor.setIsHubPortDevice(False)
voltage_sensor.setOnVoltageChangeHandler(on_new_voltage_reading)
current_sensor.setHubPort(1)
current_sensor.setIsHubPortDevice(True)
current_sensor.setOnVoltageRatioChangeHandler(on_new_current_reading)
voltage_sensor.openWaitForAttachment(1000)
current_sensor.openWaitForAttachment(1000)
serverUpdateThread.start()
atexit.register(exit_handler)
app.run(host='0.0.0.0')
voltage_sensor.close()
current_sensor.close()
except PhidgetException as e:
print(e)
hadPhidgetException = True
exit_handler(voltage_sensor, current_sensor)
except KeyboardInterrupt as key:
print(key)
exit_handler(voltage_sensor, current_sensor)
except IOError as e:
print(e)
exit_handler(voltage_sensor, current_sensor)
pan = DCMotor() pan.setDeviceSerialNumber(469502) pan.openWaitForAttachment(1000) pan.setAcceleration(ACCEL) #Setup Pnematics pressure_ctrl = VoltageOutput() pressure_ctrl.setDeviceSerialNumber(540047) pressure_ctrl.setIsHubPortDevice(False) pressure_ctrl.setHubPort(3) pressure_ctrl.setChannel(0) pressure_ctrl.openWaitForAttachment(5000) pressure_reading = VoltageRatioInput() pressure_reading.setDeviceSerialNumber(540047) pressure_reading.setIsHubPortDevice(False) pressure_reading.setHubPort(0) pressure_reading.setChannel(0) pressure_reading.openWaitForAttachment(5000) solenoid = DigitalOutput() solenoid.setDeviceSerialNumber(540047) solenoid.setIsHubPortDevice(False) solenoid.setHubPort(4) solenoid.setChannel(3) solenoid.openWaitForAttachment(5000) root = Tk() pressure = IntVar()
b=-CS/S
# Setting a and b global variables so that they can be used in other sections.
def VoltageRatioChangeHandlerA(e, voltageRatio):
global a
a = voltageRatio
#
def VoltageRatioChangeHandlerB(e, voltageRatio):
global b
b = voltageRatio
#
start = time.time()
# Bridge (DAQ1500) is enabled by default so no need to enable it.
# Some functions are Boolean. 1 means enabled. Unit of time is ms.
ch.setOnVoltageRatioChangeHandler(VoltageRatioChangeHandlerA)
ch.setHubPort(1)
ch.setIsHubPortDevice(1)
ch.openWaitForAttachment(5000)
ch.setDataInterval(500) #minimum 1
#
ch2.setOnVoltageRatioChangeHandler(VoltageRatioChangeHandlerB)
ch2.setHubPort(0)
ch2.setChannel(0)
ch2.openWaitForAttachment(5000)
ch2.setDataInterval(500) # minimum 20
################################
X=[]
Y=[]
################################
while 1:
F= b*S+CS # Force # "b" is signal from load cell
D= a*L+CL #Displacement or position. "a" comes from lvdt
def main():
try:
"""
* Allocate a new Phidget Channel object
"""
try:
ch0 = VoltageRatioInput()
ch1 = VoltageRatioInput()
ch2 = VoltageRatioInput()
ch3 = VoltageRatioInput()
ch4 = VoltageRatioInput()
ch5 = VoltageRatioInput()
ch6 = VoltageRatioInput()
ch7 = VoltageRatioInput()
ch8 = VoltageRatioInput()
ch9 = VoltageRatioInput()
digi = DigitalInput()
except PhidgetException as e:
sys.stderr.write(
"Runtime Error -> Creating VoltageRatioInput: \n\t")
DisplayError(e)
raise
except RuntimeError as e:
sys.stderr.write(
"Runtime Error -> Creating VoltageRatioInput: \n\t" + e)
raise
"""
* Set matching parameters to specify which channel to open
"""
#You may remove this line and hard-code the addressing parameters to fit your application
#channelInfo = AskForDeviceParameters(ch)
ch0.setDeviceSerialNumber(474147)
ch0.setHubPort(0)
ch0.setIsHubPortDevice(0)
ch0.setChannel(0)
ch1.setDeviceSerialNumber(474147)
ch1.setHubPort(0)
ch1.setIsHubPortDevice(0)
ch1.setChannel(1)
ch2.setDeviceSerialNumber(474147)
ch2.setHubPort(0)
ch2.setIsHubPortDevice(0)
ch2.setChannel(2)
ch3.setDeviceSerialNumber(474147)
ch3.setHubPort(0)
ch3.setIsHubPortDevice(0)
ch3.setChannel(3)
ch4.setDeviceSerialNumber(474147)
ch4.setHubPort(0)
ch4.setIsHubPortDevice(0)
ch4.setChannel(0)
ch5.setDeviceSerialNumber(000000)
ch5.setHubPort(0)
ch5.setIsHubPortDevice(0)
ch5.setChannel(1)
ch6.setDeviceSerialNumber(000000)
ch6.setHubPort(0)
ch6.setIsHubPortDevice(0)
ch6.setChannel(2)
ch7.setDeviceSerialNumber(000000)
ch7.setHubPort(0)
ch7.setIsHubPortDevice(0)
ch7.setChannel(3)
ch8.setDeviceSerialNumber(000000)
ch8.setHubPort(0)
ch8.setIsHubPortDevice(0)
ch8.setChannel(0)
ch9.setDeviceSerialNumber(000000)
ch9.setHubPort(0)
ch9.setIsHubPortDevice(0)
ch9.setChannel(1)
digi.setDeviceSerialNumber(000000)
digi.setHubPort(0)
digisetIsHubPortDevice(0)
digi.setChannel(0)
"""
* Add event handlers before calling open so that no events are missed.
"""
print("\n--------------------------------------")
print("\nSetting OnAttachHandler...")
ch0.setOnAttachHandler(onAttachHandler)
ch1.setOnAttachHandler(onAttachHandler)
ch2.setOnAttachHandler(onAttachHandler)
ch3.setOnAttachHandler(onAttachHandler)
ch4.setOnAttachHandler(onAttachHandler)
ch5.setOnAttachHandler(onAttachHandler)
ch6.setOnAttachHandler(onAttachHandler)
ch7.setOnAttachHandler(onAttachHandler)
ch8.setOnAttachHandler(onAttachHandler)
ch9.setOnAttachHandler(onAttachHandler)
print("Setting OnDetachHandler...")
ch0.setOnDetachHandler(onDetachHandler)
ch1.setOnDetachHandler(onDetachHandler)
ch2.setOnDetachHandler(onDetachHandler)
ch3.setOnDetachHandler(onDetachHandler)
ch4.setOnDetachHandler(onDetachHandler)
ch5.setOnDetachHandler(onDetachHandler)
ch6.setOnDetachHandler(onDetachHandler)
ch7.setOnDetachHandler(onDetachHandler)
ch8.setOnDetachHandler(onDetachHandler)
ch9.setOnDetachHandler(onDetachHandler)
print("Setting OnErrorHandler...")
ch0.setOnErrorHandler(onErrorHandler)
ch1.setOnErrorHandler(onErrorHandler)
ch2.setOnErrorHandler(onErrorHandler)
ch3.setOnErrorHandler(onErrorHandler)
ch4.setOnErrorHandler(onErrorHandler)
ch5.setOnErrorHandler(onErrorHandler)
ch6.setOnErrorHandler(onErrorHandler)
ch7.setOnErrorHandler(onErrorHandler)
ch8.setOnErrorHandler(onErrorHandler)
ch9.setOnErrorHandler(onErrorHandler)
"""
* Open the channel with a timeout
"""
print("\nOpening and Waiting for Attachment...")
try:
ch0.openWaitForAttachment(5000)
ch1.openWaitForAttachment(5000)
ch2.openWaitForAttachment(5000)
ch3.openWaitForAttachment(5000)
ch4.openWaitForAttachment(5000)
ch5.openWaitForAttachment(5000)
ch6.openWaitForAttachment(5000)
ch7.openWaitForAttachment(5000)
ch8.openWaitForAttachment(5000)
ch9.openWaitForAttachment(5000)
digi.openWaitForAttachment(5000)
except PhidgetException as e:
PrintOpenErrorMessage(e, ch0)
PrintOpenErrorMessage(e, ch1)
PrintOpenErrorMessage(e, ch2)
PrintOpenErrorMessage(e, ch3)
PrintOpenErrorMessage(e, ch4)
PrintOpenErrorMessage(e, ch5)
PrintOpenErrorMessage(e, ch6)
PrintOpenErrorMessage(e, ch7)
PrintOpenErrorMessage(e, ch8)
PrintOpenErrorMessage(e, ch9)
raise EndProgramSignal("Program Terminated: Open Failed")
print("Sampling data for 10 seconds...")
print(
"You can do stuff with your Phidgets here and/or in the event handlers."
)
time.sleep(5)
#Create csv file to write data to
file_path = os.path.join('C:', 'Users', 'Jacob Bennedsen', 'Desktop',
'Python Files', 'Learning',
'Fatigue_Test.csv')
csvfile = open(file_path, 'w')
filewriter = csv.writer(csvfile,
delimiter=',',
lineterminator='\n',
quotechar='|',
quoting=csv.QUOTE_MINIMAL)
#Write header row to csv
filewriter.writerow([
'Signal Iteration', 'Time (s)', 'ch0 (V/V)', 'ch1 (V/V)',
'ch2 (V/V)', 'ch3 (V/V)', 'ch4 (V/V)', 'ch5 (V/V)', 'ch6 (V/V)',
'ch7 (V/V)', 'ch8 (V/V)', 'ch9 (V/V)'
])
delay = 1 #seconds
#Initialize lists to be used for data plotting
logged_time = list()
w0 = list()
w1 = list()
w2 = list()
w3 = list()
w4 = list()
w5 = list()
w6 - list()
w7 = list()
w8 = list()
w9 = list()
d = deque([0, 0]) #Deque to check for change in state
d.maxlen(2) #Set max length of deque to 2
sig_count = 0 #Count of changes in state
i = 0 #Iteration of loop
start_time = time.monotonic() #Start time betweeen state change timer
elapsed_time = 0 #Initialize the elapsed time
while elapsed_time < 30: #Loop while the time between state changes is less than 30 sec
elapsed_time = time.monotonic() - start_time #Update elapsed time
d.append(digi.getState()) #Get the latest PLC signal value
if d[0] != d[1]: #Check if the latest and previous values changed
start_time = time.monotonic(
) #If yes then reset time between state changes
sig_count += 1 #Increment signal count
t = i * delay #Timestamp based upon loop iterations and data collection delay
#Store latest voltage ratio from each channel in a variable
v0 = ch0.getVoltageRatio()
v1 = ch1.getVoltageRatio()
v2 = ch2.getVoltageRatio()
v3 = ch3.getVoltageRatio()
v4 = ch4.getVoltageRatio()
v5 = ch5.getVoltageRatio()
v6 = ch6.getVoltageRatio()
v7 = ch7.getVoltageRatio()
v8 = ch8.getVoltageRatio()
v9 = ch9.getVoltageRatio()
logged_time.append(t) #Add latest time to list
w0.append(v0) #Add latest voltage ratio to list
w1.append(v1)
w2.append(v2)
w3.append(v3)
w4.append(v4)
w5.append(v5)
w6.append(v6)
w7.append(v7)
w8.append(v8)
w9.append(v9)
#Write the collected data to a csv
filewriter.writerow(
[sig_count, t, v0, v1, v2, v3, v4, v5, v6, v7, v8, v9])
i += 1 #Increment iterations
time.sleep(
delay) #Wait for the specified time before looping again
csvfile.close()
#Plot data
plt.plot(logged_time, w0, label='ch0')
plt.plot(logged_time, w1, label='ch1')
plt.plot(logged_time, w2, label='ch2')
plt.plot(logged_time, w3, label='ch3')
plt.plot(logged_time, w4, label='ch4')
plt.plot(logged_time, w5, label='ch5')
plt.plot(logged_time, w6, label='ch6')
plt.plot(logged_time, w7, label='ch7')
plt.plot(logged_time, w8, label='ch8')
plt.plot(logged_time, w9, label='ch9')
plt.legend()
plt.show()
"""
* Perform clean up and exit
"""
#clear the VoltageRatioChange event handler
ch0.setOnVoltageRatioChangeHandler(None)
ch1.setOnVoltageRatioChangeHandler(None)
ch2.setOnVoltageRatioChangeHandler(None)
ch3.setOnVoltageRatioChangeHandler(None)
ch4.setOnVoltageRatioChangeHandler(None)
ch5.setOnVoltageRatioChangeHandler(None)
ch6.setOnVoltageRatioChangeHandler(None)
ch7.setOnVoltageRatioChangeHandler(None)
ch8.setOnVoltageRatioChangeHandler(None)
ch9.setOnVoltageRatioChangeHandler(None)
print("\nDone Sampling...")
print("Cleaning up...")
ch0.close()
ch1.close()
ch2.close()
ch3.close()
ch4.close()
ch5.close()
ch6.close()
ch7.close()
ch8.close()
ch9.close()
print("\nExiting...")
return 0
except PhidgetException as e:
sys.stderr.write("\nExiting with error(s)...")
DisplayError(e)
traceback.print_exc()
print("Cleaning up...")
ch0.setOnVoltageRatioChangeHandler(None)
ch1.setOnVoltageRatioChangeHandler(None)
ch2.setOnVoltageRatioChangeHandler(None)
ch3.setOnVoltageRatioChangeHandler(None)
ch0.close()
ch1.close()
ch2.close()
ch3.close()
ch4.close()
ch5.close()
ch6.close()
ch7.close()
ch8.close()
ch9.close()
return 1
except EndProgramSignal as e:
print(e)
print("Cleaning up...")
ch0.setOnVoltageRatioChangeHandler(None)
ch1.setOnVoltageRatioChangeHandler(None)
ch2.setOnVoltageRatioChangeHandler(None)
ch3.setOnVoltageRatioChangeHandler(None)
ch0.close()
ch1.close()
ch2.close()
ch3.close()
ch4.close()
ch5.close()
ch6.close()
ch7.close()
ch8.close()
ch9.close()
return 1
finally:
print("Press ENTER to end program.")
readin = sys.stdin.readline()
def main():
global w1
global w2
global w3
global w4
global c1
global c2
global c3
global c4
mvalue = []
"""
* Define how long the program runs for
"""
runtime = 10 # seconds
"""
* Allocate a new Phidget Channel object
"""
ch = VoltageRatioInput()
ch2 = VoltageRatioInput()
ch3 = VoltageRatioInput()
ch4 = VoltageRatioInput()
"""
* Set matching parameters to specify which channel to open
"""
ch.setDeviceSerialNumber(533379)
ch.setIsHubPortDevice(False)
ch.setChannel(0)
ch2.setDeviceSerialNumber(533379)
ch2.setIsHubPortDevice(False)
ch2.setChannel(1)
ch3.setDeviceSerialNumber(533379)
ch3.setIsHubPortDevice(False)
ch3.setChannel(2)
ch4.setDeviceSerialNumber(533379)
ch4.setIsHubPortDevice(False)
ch4.setChannel(3)
"""
* Add event handlers before calling open so that no events are missed.
"""
print("\n--------------------------------------")
ch.setOnAttachHandler(onAttachHandler)
ch2.setOnAttachHandler(onAttachHandler)
ch3.setOnAttachHandler(onAttachHandler)
ch4.setOnAttachHandler(onAttachHandler)
ch.setOnDetachHandler(onDetachHandler)
ch2.setOnDetachHandler(onDetachHandler)
ch3.setOnDetachHandler(onDetachHandler)
ch4.setOnDetachHandler(onDetachHandler)
ch.setOnErrorHandler(onErrorHandler)
ch2.setOnErrorHandler(onErrorHandler)
ch3.setOnErrorHandler(onErrorHandler)
ch4.setOnErrorHandler(onErrorHandler)
ch.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
ch2.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler2)
ch3.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler3)
ch4.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler4)
"""
* Open the channel with a timeout
"""
print "motor 1 - w1"
ch.openWaitForAttachment(5000)
time.sleep(runtime)
ch.setOnVoltageRatioChangeHandler(None)
mvalue.append(w1 / c1)
w1 = 0
c1 = 0
x = raw_input("motor 1 - w2")
ch.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
ch.openWaitForAttachment(5000)
time.sleep(runtime)
ch.setOnVoltageRatioChangeHandler(None)
mvalue.append(w1 / c1)
w1 = 0
c1 = 0
x = raw_input("motor 2 - w1")
ch2.openWaitForAttachment(5000)
time.sleep(runtime)
ch2.setOnVoltageRatioChangeHandler(None)
mvalue.append(w2 / c2)
w2 = 0
c2 = 0
x = raw_input("motor 2 - w2")
ch2.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler2)
ch2.openWaitForAttachment(5000)
time.sleep(runtime)
ch2.setOnVoltageRatioChangeHandler(None)
mvalue.append(w2 / c2)
w2 = 0
c2 = 0
x = raw_input("motor 3 - w1")
ch3.openWaitForAttachment(5000)
time.sleep(runtime)
ch3.setOnVoltageRatioChangeHandler(None)
mvalue.append(w3 / c3)
w3 = 0
c3 = 0
x = raw_input("motor 3 - w2")
ch3.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler3)
ch3.openWaitForAttachment(5000)
time.sleep(runtime)
ch3.setOnVoltageRatioChangeHandler(None)
mvalue.append(w3 / c3)
w3 = 0
c3 = 0
x = raw_input("motor 4 - w1")
ch4.openWaitForAttachment(5000)
time.sleep(runtime)
ch4.setOnVoltageRatioChangeHandler(None)
mvalue.append(w4 / c4)
w4 = 0
c4 = 0
x = raw_input("motor 4 - w2")
ch4.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler4)
ch4.openWaitForAttachment(5000)
time.sleep(runtime)
ch4.setOnVoltageRatioChangeHandler(None)
mvalue.append(w4 / c4)
w4 = 0
c4 = 0
# calibration
cali.run_calibration(mvalue)
print("calibration file saved...")
ch.close()
ch2.close()
ch3.close()
ch4.close()
print("\nExiting...")
return 0
def main():
try:
"""
* Allocate a new Phidget Channel object
"""
try:
ch0 = VoltageRatioInput()
ch1 = VoltageRatioInput()
ch2 = VoltageRatioInput()
ch3 = VoltageRatioInput()
ch4 = VoltageRatioInput()
ch5 = VoltageRatioInput()
ch6 = VoltageRatioInput()
ch7 = VoltageRatioInput()
ch8 = VoltageRatioInput()
ch9 = VoltageRatioInput()
except PhidgetException as e:
sys.stderr.write(
"Runtime Error -> Creating VoltageRatioInput: \n\t")
DisplayError(e)
raise
except RuntimeError as e:
sys.stderr.write(
"Runtime Error -> Creating VoltageRatioInput: \n\t" + e)
raise
"""
* Set matching parameters to specify which channel to open
"""
#You may remove this line and hard-code the addressing parameters to fit your application
#channelInfo = AskForDeviceParameters(ch)
ch0.setDeviceSerialNumber(474147)
ch0.setHubPort(0)
ch0.setIsHubPortDevice(0)
ch0.setChannel(0)
ch1.setDeviceSerialNumber(474147)
ch1.setHubPort(0)
ch1.setIsHubPortDevice(0)
ch1.setChannel(1)
ch2.setDeviceSerialNumber(474147)
ch2.setHubPort(0)
ch2.setIsHubPortDevice(0)
ch2.setChannel(2)
ch3.setDeviceSerialNumber(474147)
ch3.setHubPort(0)
ch3.setIsHubPortDevice(0)
ch3.setChannel(3)
ch4.setDeviceSerialNumber(000000)
ch4.setHubPort(0)
ch4.setIsHubPortDevice(0)
ch4.setChannel(0)
ch5.setDeviceSerialNumber(000000)
ch5.setHubPort(0)
ch5.setIsHubPortDevice(0)
ch5.setChannel(1)
ch6.setDeviceSerialNumber(000000)
ch6.setHubPort(0)
ch6.setIsHubPortDevice(0)
ch6.setChannel(2)
ch7.setDeviceSerialNumber(000000)
ch7.setHubPort(0)
ch7.setIsHubPortDevice(0)
ch7.setChannel(3)
ch8.setDeviceSerialNumber(000000)
ch8.setHubPort(0)
ch8.setIsHubPortDevice(0)
ch8.setChannel(0)
ch9.setDeviceSerialNumber(000000)
ch9.setHubPort(0)
ch9.setIsHubPortDevice(0)
ch9.setChannel(1)
"""
* Add event handlers before calling open so that no events are missed.
"""
print("\n--------------------------------------")
print("\nSetting OnAttachHandler...")
ch0.setOnAttachHandler(onAttachHandler)
ch1.setOnAttachHandler(onAttachHandler)
ch2.setOnAttachHandler(onAttachHandler)
ch3.setOnAttachHandler(onAttachHandler)
ch4.setOnAttachHandler(onAttachHandler)
ch5.setOnAttachHandler(onAttachHandler)
ch6.setOnAttachHandler(onAttachHandler)
ch7.setOnAttachHandler(onAttachHandler)
ch8.setOnAttachHandler(onAttachHandler)
ch9.setOnAttachHandler(onAttachHandler)
print("Setting OnDetachHandler...")
ch0.setOnDetachHandler(onDetachHandler)
ch1.setOnDetachHandler(onDetachHandler)
ch2.setOnDetachHandler(onDetachHandler)
ch3.setOnDetachHandler(onDetachHandler)
ch4.setOnDetachHandler(onDetachHandler)
ch5.setOnDetachHandler(onDetachHandler)
ch6.setOnDetachHandler(onDetachHandler)
ch7.setOnDetachHandler(onDetachHandler)
ch8.setOnDetachHandler(onDetachHandler)
ch9.setOnDetachHandler(onDetachHandler)
print("Setting OnErrorHandler...")
ch0.setOnErrorHandler(onErrorHandler)
ch1.setOnErrorHandler(onErrorHandler)
ch2.setOnErrorHandler(onErrorHandler)
ch3.setOnErrorHandler(onErrorHandler)
ch4.setOnErrorHandler(onErrorHandler)
ch5.setOnErrorHandler(onErrorHandler)
ch6.setOnErrorHandler(onErrorHandler)
ch7.setOnErrorHandler(onErrorHandler)
ch8.setOnErrorHandler(onErrorHandler)
ch9.setOnErrorHandler(onErrorHandler)
"""
* Open the channel with a timeout
"""
print("\nOpening and Waiting for Attachment...")
try:
ch0.openWaitForAttachment(5000)
ch1.openWaitForAttachment(5000)
ch2.openWaitForAttachment(5000)
ch3.openWaitForAttachment(5000)
ch4.openWaitForAttachment(5000)
ch5.openWaitForAttachment(5000)
ch6.openWaitForAttachment(5000)
ch7.openWaitForAttachment(5000)
ch8.openWaitForAttachment(5000)
ch9.openWaitForAttachment(5000)
except PhidgetException as e:
PrintOpenErrorMessage(e, ch0)
PrintOpenErrorMessage(e, ch1)
PrintOpenErrorMessage(e, ch2)
PrintOpenErrorMessage(e, ch3)
PrintOpenErrorMessage(e, ch4)
PrintOpenErrorMessage(e, ch5)
PrintOpenErrorMessage(e, ch6)
PrintOpenErrorMessage(e, ch7)
PrintOpenErrorMessage(e, ch8)
PrintOpenErrorMessage(e, ch9)
raise EndProgramSignal("Program Terminated: Open Failed")
print("Sampling data...")
print(
"You can do stuff with your Phidgets here and/or in the event handlers."
)
time.sleep(5)
#Create csv file to write data to
file_path = os.path.join('C:', 'Users', 'Jacob Bennedsen', 'Desktop',
'Python Files', 'Learning', 'Creep_Test.csv')
csvfile = open(file_path, 'w')
filewriter = csv.writer(csvfile,
delimiter=',',
lineterminator='\n',
quotechar='|',
quoting=csv.QUOTE_MINIMAL)
#Write header row to csv
filewriter.writerow([
'Time (s)', 'ch0 (V/V)', 'ch1 (V/V)', 'ch2 (V/V)', 'ch3 (V/V)',
'ch4 (V/V)', 'ch5 (V/V)', 'ch6 (V/V)', 'ch7 (V/V)', 'ch8 (V/V)',
'ch9 (V/V)'
])
delay = 1 #seconds
#Initialize lists to be used for data plotting
logged_time = list()
w0 = list()
w1 = list()
w2 = list()
w3 = list()
w4 = list()
w5 = list()
w6 - list()
w7 = list()
w8 = list()
w9 = list()
tms = list(1, 3600, delay)
for i in tms:
v0 = ch0.getVoltageRatio()
v1 = ch1.getVoltageRatio()
v2 = ch2.getVoltageRatio()
v3 = ch3.getVoltageRatio()
v4 = ch4.getVoltageRatio()
v5 = ch5.getVoltageRatio()
v6 = ch6.getVoltageRatio()
v7 = ch7.getVoltageRatio()
v8 = ch8.getVoltageRatio()
v9 = ch9.getVoltageRatio()
w0.append(v0) #Add latest voltage ratio to list
w1.append(v1)
w2.append(v2)
w3.append(v3)
w4.append(v4)
w5.append(v5)
w6.append(v6)
w7.append(v7)
w8.append(v8)
w9.append(v9)
#Write the collected data to a csv
filewriter.writerow(
[tms[i], v0, v1, v2, v3, v4, v5, v6, v7, v8, v9])
time.sleep(
delay) #Wait for the specified time before looping again
csvfile.close()
#Plot data
plt.plot(logged_time, w0, label='ch0')
plt.plot(logged_time, w1, label='ch1')
plt.plot(logged_time, w2, label='ch2')
plt.plot(logged_time, w3, label='ch3')
plt.plot(logged_time, w4, label='ch4')
plt.plot(logged_time, w5, label='ch5')
plt.plot(logged_time, w6, label='ch6')
plt.plot(logged_time, w7, label='ch7')
plt.plot(logged_time, w8, label='ch8')
plt.plot(logged_time, w9, label='ch9')
plt.legend()
plt.show()
"""
* Perform clean up and exit
"""
#clear the VoltageRatioChange event handler
ch0.setOnVoltageRatioChangeHandler(None)
ch1.setOnVoltageRatioChangeHandler(None)
ch2.setOnVoltageRatioChangeHandler(None)
ch3.setOnVoltageRatioChangeHandler(None)
ch4.setOnVoltageRatioChangeHandler(None)
ch5.setOnVoltageRatioChangeHandler(None)
ch6.setOnVoltageRatioChangeHandler(None)
ch7.setOnVoltageRatioChangeHandler(None)
ch8.setOnVoltageRatioChangeHandler(None)
ch9.setOnVoltageRatioChangeHandler(None)
print("\nDone Sampling...")
print("Cleaning up...")
ch0.close()
ch1.close()
ch2.close()
ch3.close()
ch4.close()
ch5.close()
ch6.close()
ch7.close()
ch8.close()
ch9.close()
print("\nExiting...")
return 0
except PhidgetException as e:
sys.stderr.write("\nExiting with error(s)...")
DisplayError(e)
traceback.print_exc()
print("Cleaning up...")
ch0.setOnVoltageRatioChangeHandler(None)
ch1.setOnVoltageRatioChangeHandler(None)
ch2.setOnVoltageRatioChangeHandler(None)
ch3.setOnVoltageRatioChangeHandler(None)
ch0.close()
ch1.close()
ch2.close()
ch3.close()
ch4.close()
ch5.close()
ch6.close()
ch7.close()
ch8.close()
ch9.close()
return 1
except EndProgramSignal as e:
print(e)
print("Cleaning up...")
ch0.setOnVoltageRatioChangeHandler(None)
ch1.setOnVoltageRatioChangeHandler(None)
ch2.setOnVoltageRatioChangeHandler(None)
ch3.setOnVoltageRatioChangeHandler(None)
ch0.close()
ch1.close()
ch2.close()
ch3.close()
ch4.close()
ch5.close()
ch6.close()
ch7.close()
ch8.close()
ch9.close()
return 1
finally:
print("Press ENTER to end program.")
readin = sys.stdin.readline()