def test_motion():
# bvhFilePath = '../samples/walk_left_90degree.bvh'
# bvhFilePath = '../samples/wd2_cross_walk_0d_01.bvh'
# bvhFilePath = '../samples/wd2_cross_walk_0d_fast_21.bvh'
# bvhFilePath = '../samples/wd2_WalkAzuma01.bvh'
# bvhFilePath = '../samples/wd2_WalkBackward00.bvh'
# bvhFilePath = '../samples/wd2_WalkForwardNormal00.bvh'
# bvhFilePath = '../samples/wd2_WalkForwardSlow01.bvh'
# bvhFilePath = '../samples/wd2_WalkForwardVFast00.bvh'
# bvhFilePath = '../samples/wd2_WalkHandWav00.bvh'
bvhFilePath = '../samples/wd2_WalkSukiko00.bvh'
# bvhFilePath = '../samples/wd2_WalkSameSame01.bvh'
# bvhFilePath = '../samples/wd2_WalkSoldier00.bvh'
motion0 = yf.readBvhFile(bvhFilePath)
viewer = ysv.SimpleViewer(rect=(0, 0, 1280, 900))
viewer.record(False)
viewer.doc.addRenderer(
'motion0',
yr.JointMotionRenderer(motion0, (0, 0, 255), yr.LINK_LINE))
viewer.doc.addObject('motion0', motion0)
viewer.startTimer(1 / 30.)
viewer.show()
Fl.run()
pass
def test_blend_motion():
# bvhFilePath = '../samples/wd2_WalkForwardVFast00.bvh'
bvhFilePath = '../samples/wd2_WalkSameSame00.bvh'
motion0 = yf.readBvhFile(bvhFilePath, 0.01)
bvhFilePath = '../samples/wd2_WalkSukiko00.bvh'
motion1 = yf.readBvhFile(bvhFilePath, 0.01)
# VFast to Sukiko
# align_motion(motion1, motion0[54], 121)
# temp_motion = blend_motion(motion0, motion1, 54, 82, 121, 180)
# SameSame to Sukiko
# align_motion(motion1, motion0[76], 121)
# temp_motion = blend_motion(motion0, motion1, 76, 116, 121, 180)
# Sukiko to SameSame
align_motion(motion0, motion1[121], 76)
temp_motion = blend_motion(motion1, motion0, 121, 180, 76, 116)
viewer = ysv.SimpleViewer(rect=(0, 0, 1280, 900))
viewer.record(False)
viewer.doc.addRenderer(
'motion0',
yr.JointMotionRenderer(motion0, (0, 0, 255), yr.LINK_LINE))
viewer.doc.addObject('motion0', motion0)
# viewer.doc.setRendererVisible('motion0', False)
viewer.doc.addRenderer(
'motion1',
yr.JointMotionRenderer(motion1, (0, 255, 0), yr.LINK_LINE))
viewer.doc.addObject('motion1', motion1)
# viewer.doc.setRendererVisible('motion1', False)
viewer.doc.addRenderer(
'stitched_motion',
yr.JointMotionRenderer(temp_motion, (255, 255, 0), yr.LINK_LINE))
viewer.doc.addObject('stitched_motion', temp_motion)
# viewer.doc.setRendererVisible('stitched_motion', True)
def pre_callback(frame):
# VFast to Sukiko
# motion0.goToFrame(54)
# motion1.goToFrame(180)
# SameSame to Sukiko
# motion0.goToFrame(76)
# motion1.goToFrame(180)
# Sukiko to SameSame
motion0.goToFrame(116)
motion1.goToFrame(121)
motion0.goToFrame(116)
motion1.goToFrame(121)
viewer.setPreFrameCallback_Always(pre_callback)
viewer.startTimer(1 / 30.)
viewer.show()
Fl.run()
def test_blend_posture():
bvhFilePath = '../samples/walk_left_90degree.bvh'
motion0 = yf.readBvhFile(bvhFilePath)[104:]
bvhFilePath = '../samples/walk_left_90degree.bvh'
motion1 = yf.readBvhFile(bvhFilePath)[0:]
align_motion(motion1, motion0[0], 0)
temp_motion = deepcopy(motion1)
for i in range(21):
temp_motion[i] = blend_posture(
motion0[0], motion1[0], .5 - .5 * math.cos(i / 20. * math.pi))
# temp_motion[i] = blend_posture(motion0[0], motion1[0], i/20.)
for i in range(21, len(temp_motion)):
temp_motion[i] = temp_motion[20]
viewer = ysv.SimpleViewer(rect=(0, 0, 1280, 900))
viewer.record(False)
viewer.doc.addRenderer(
'motion0',
yr.JointMotionRenderer(motion0, (0, 0, 255), yr.LINK_LINE))
viewer.doc.addObject('motion0', motion0)
viewer.doc.addRenderer(
'motion1',
yr.JointMotionRenderer(motion1, (0, 255, 0), yr.LINK_LINE))
viewer.doc.addObject('motion1', motion1)
viewer.doc.addRenderer(
'stitched_motion',
yr.JointMotionRenderer(temp_motion, (255, 255, 0), yr.LINK_LINE))
viewer.doc.addObject('stitched_motion', temp_motion)
def pre_callback(frame):
motion0.goToFrame(0)
motion1.goToFrame(0)
viewer.setPreFrameCallback_Always(pre_callback)
viewer.startTimer(1 / 30.)
viewer.show()
Fl.run()
def main():
np.set_printoptions(precision=4, linewidth=200)
# motion, mcfg, wcfg, stepsPerFrame, config = mit.create_vchain_5()
motion, mcfg, wcfg, stepsPerFrame, config = mit.create_biped()
vpWorld = cvw.VpWorld(wcfg)
motionModel = cvm.VpMotionModel(vpWorld, motion[0], mcfg)
controlModel = cvm.VpControlModel(vpWorld, motion[0], mcfg)
vpWorld.initialize()
controlModel.initializeHybridDynamics()
ModelOffset = (1.5, -0.02, 0)
#ModelOffset = (1.5, 1.02, 0)
#ModelOffset = (1.5, 0.02, 0)
controlModel.translateByOffset(ModelOffset)
#controlModel.translateByOffset((1.5,-0.0328,0))#(1.5,-0.02,0))
totalDOF = controlModel.getTotalDOF()
DOFs = controlModel.getDOFs()
# parameter
Kt = config['Kt']
Dt = config['Dt'] # tracking gain
Kl = config['Kl']
Dl = config['Dl'] # linear balance gain
Kh = config['Kh']
Dh = config['Dh'] # angular balance gain
Ks = config['Ks']
Ds = config['Ds'] # penalty force spring gain
Bt = config['Bt']
Bl = config['Bl']
Bh = config['Bh']
w = mot.getTrackingWeight(DOFs, motion[0].skeleton, config['weightMap'])
w_IK = mot.getTrackingWeight(DOFs, motion[0].skeleton,
config['IKweightMap'])
supL = motion[0].skeleton.getJointIndex(config['supLink'])
supR = motion[0].skeleton.getJointIndex(config['supLink2'])
#controlModel.SetGround(supL, True)
#controlModel.SetGround(supR, True)
selectedBody = motion[0].skeleton.getJointIndex(config['end'])
#constBody = motion[0].skeleton.getJointIndex('LeftForeArm')
constBody = motion[0].skeleton.getJointIndex('Hips')
# jacobian
JsupL = yjc.makeEmptyJacobian(DOFs, 1)
dJsupL = JsupL.copy()
JsupPreL = JsupL.copy()
JsupR = yjc.makeEmptyJacobian(DOFs, 1)
dJsupR = JsupR.copy()
JsupPreR = JsupR.copy()
Jsup = yjc.makeEmptyJacobian(DOFs, 1)
dJsup = Jsup.copy()
JsupPre = Jsup.copy()
Jsys = yjc.makeEmptyJacobian(DOFs, controlModel.getBodyNum())
dJsys = Jsys.copy()
JsysPre = Jsys.copy()
Jconst = yjc.makeEmptyJacobian(DOFs, 1)
dJconst = Jconst.copy()
supLJointMasks = [yjc.getLinkJointMask(motion[0].skeleton, supL)]
supRJointMasks = [yjc.getLinkJointMask(motion[0].skeleton, supR)]
constJointMasks = [yjc.getLinkJointMask(motion[0].skeleton, constBody)]
allLinkJointMasks = yjc.getAllLinkJointMasks(motion[0].skeleton)
# momentum matrix
linkMasses = controlModel.getBodyMasses()
totalMass = controlModel.getTotalMass()
TO = ymt.make_TO(linkMasses)
dTO = ymt.make_dTO(len(linkMasses))
# optimization
problem = yac.LSE(totalDOF, 6)
a_sup = (0, 0, 0, 0, 0, 0) #L
#a_sup2 = (0,0,0, 0,0,0)#R
a_sup2 = [0, 0, 0, 0, 0, 0] #R
a_sup_2 = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
CP_old = [mm.v3(0., 0., 0.)]
# penalty method
bodyIDsToCheck = range(vpWorld.getBodyNum())
mus = [1.] * len(bodyIDsToCheck)
# flat data structure
ddth_des_flat = ype.makeFlatList(totalDOF)
dth_flat = ype.makeFlatList(totalDOF)
ddth_sol = ype.makeNestedList(DOFs)
d_th_IK = ype.makeNestedList(DOFs)
d_th_IK_L = ype.makeNestedList(DOFs)
d_th_IK_R = ype.makeNestedList(DOFs)
dd_th_IK = ype.makeNestedList(DOFs)
dd_th_IK_flat = ype.makeFlatList(totalDOF)
d_th_IK_flat = ype.makeFlatList(totalDOF)
ddth_c_flat = ype.makeFlatList(totalDOF)
# viewer
rd_footCenter = [None]
rd_footCenter_ref = [None]
rd_footCenterL = [None]
rd_footCenterR = [None]
rd_CM_plane = [None]
rd_CM_plane_ref = [None]
rd_CM = [None]
rd_CP = [None]
rd_CP_des = [None]
rd_dL_des_plane = [None]
rd_dH_des = [None]
rd_grf_des = [None]
rd_exf_des = [None]
rd_root_des = [None]
rd_soft_const_vec = [None]
rd_CMP = [None]
rd_DesPosL = [None]
rd_DesPosR = [None]
rootPos = [None]
selectedBodyId = [selectedBody]
extraForce = [None]
applyedExtraForce = [None]
applyedExtraForce[0] = [0, 0, 0]
viewer = ysv.SimpleViewer(rect=(0, 0, 1000, 800))
# viewer.record(False)
# viewer.doc.addRenderer('motion', yr.JointMotionRenderer(motion, (0,255,255), yr.LINK_BONE))
viewer.doc.addObject('motion', motion)
viewer.doc.addRenderer(
'motionModel',
cvr.VpModelRenderer(motionModel, (150, 150, 255), yr.POLYGON_FILL))
viewer.doc.addRenderer(
'controlModel',
cvr.VpModelRenderer(controlModel, (255, 240, 255), yr.POLYGON_FILL))
viewer.doc.addRenderer('rd_footCenter', yr.PointsRenderer(rd_footCenter))
#viewer.doc.addRenderer('rd_footCenterL', yr.PointsRenderer(rd_footCenterL))
#viewer.doc.addRenderer('rd_footCenterR', yr.PointsRenderer(rd_footCenterR))
viewer.doc.addRenderer('rd_CM_plane',
yr.PointsRenderer(rd_CM_plane, (255, 255, 0)))
viewer.doc.addRenderer('rd_CP', yr.PointsRenderer(rd_CP, (0, 255, 0)))
#viewer.doc.addRenderer('rd_CP_des', yr.PointsRenderer(rd_CP_des, (255,0,255)))
# viewer.doc.addRenderer('rd_dL_des_plane', yr.VectorsRenderer(rd_dL_des_plane, rd_CM, (255,255,0)))
# viewer.doc.addRenderer('rd_dH_des', yr.VectorsRenderer(rd_dH_des, rd_CM, (0,255,0)))
viewer.doc.addRenderer(
'rd_grf_des',
yr.ForcesRenderer(rd_grf_des, rd_CP_des, (0, 255, 255), .001))
viewer.doc.addRenderer(
'rd_exf_des',
yr.ForcesRenderer(rd_exf_des, rd_root_des, (0, 255, 0), .009, 0.05))
#viewer.doc.addRenderer('rd_CMP', yr.PointsRenderer(rd_CMP, (0,0,255)))
viewer.doc.addRenderer('rd_DesPosL',
yr.PointsRenderer(rd_DesPosL, (0, 0, 255)))
viewer.doc.addRenderer('rd_DesPosR',
yr.PointsRenderer(rd_DesPosR, (0, 100, 255)))
#viewer.doc.addRenderer('softConstraint', yr.VectorsRenderer(rd_soft_const_vec, rd_CMP, (255,0,0), 3))
viewer.doc.addRenderer('rd_footCenter_ref',
yr.PointsRenderer(rd_footCenter_ref))
viewer.doc.addRenderer('rd_CM_plane_ref',
yr.PointsRenderer(rd_CM_plane_ref, (255, 255, 0)))
stage = 0
def preCallback(frame):
motionModel.update(motion[frame])
def simulateCallback(frame):
global g_initFlag
global preFootCenterL, preFootCenterR
global preFootOrientationL, preFootOrientationR
global forceShowFrame
global forceApplyFrame
global JsysPre
global JsupPreL
global JsupPreR
global JsupPre
global softConstPoint
global stage
motionModel.update(motion[frame])
Kt, Kk, Kl, Kh, Ksc, Bt, Bl, Bh, Bsc = viewer.GetParam()
if stage == 3:
Bsc = 0
#Kl *= 1.5
Dt = 2 * (Kt**.5)
Dk = 2 * (Kk**.5)
Dl = 2 * (Kl**.5)
Dh = 2 * (Kh**.5)
Dsc = 2 * (Ksc**.5)
if Bsc == 0.0:
viewer.doc.showRenderer('softConstraint', False)
viewer.motionViewWnd.update(1, viewer.doc)
else:
viewer.doc.showRenderer('softConstraint', True)
renderer1 = viewer.doc.getRenderer('softConstraint')
renderer1.rc.setLineWidth(0.1 + Bsc * 3)
viewer.motionViewWnd.update(1, viewer.doc)
# tracking
th_r = motion.getDOFPositions(frame)
th = controlModel.getDOFPositions()
dth_r = motion.getDOFVelocities(frame)
dth = controlModel.getDOFVelocities()
ddth_r = motion.getDOFAccelerations(frame)
ddth_des = yct.getDesiredDOFAccelerations(th_r, th, dth_r, dth, ddth_r,
Kt, Dt)
ddth_c = controlModel.getDOFAccelerations()
ype.flatten(ddth_des, ddth_des_flat)
ype.flatten(dth, dth_flat)
ype.flatten(ddth_c, ddth_c_flat)
# jacobian
footCenterL = controlModel.getBodyPositionGlobal(supL)
footCenterR = controlModel.getBodyPositionGlobal(supR)
refFootL = motionModel.getBodyPositionGlobal(supL)
refFootR = motionModel.getBodyPositionGlobal(supR)
footCenter = footCenterL + (footCenterR - footCenterL) / 2.0
footCenter[1] = 0.
footCenter_ref = refFootL + (refFootR - refFootL) / 2.0
footCenter_ref[1] = 0.
linkPositions = controlModel.getBodyPositionsGlobal()
linkVelocities = controlModel.getBodyVelocitiesGlobal()
linkAngVelocities = controlModel.getBodyAngVelocitiesGlobal()
linkInertias = controlModel.getBodyInertiasGlobal()
jointPositions = controlModel.getJointPositionsGlobal()
jointAxeses = controlModel.getDOFAxeses()
CM = yrp.getCM(linkPositions, linkMasses, totalMass)
dCM = yrp.getCM(linkVelocities, linkMasses, totalMass)
CM_plane = copy.copy(CM)
CM_plane[1] = 0.
dCM_plane = copy.copy(dCM)
dCM_plane[1] = 0.
linkPositions_ref = motionModel.getBodyPositionsGlobal()
CM_plane_ref = yrp.getCM(linkPositions_ref, linkMasses, totalMass)
CM_plane_ref[1] = 0.
P = ymt.getPureInertiaMatrix(TO, linkMasses, linkPositions, CM,
linkInertias)
dP = ymt.getPureInertiaMatrixDerivative(dTO, linkMasses,
linkVelocities, dCM,
linkAngVelocities,
linkInertias)
yjc.computeJacobian2(Jsys, DOFs, jointPositions, jointAxeses,
linkPositions, allLinkJointMasks)
dJsys = (Jsys - JsysPre) / (1 / 30.)
JsysPre = Jsys
#yjc.computeJacobianDerivative2(dJsys, DOFs, jointPositions, jointAxeses, linkAngVelocities, linkPositions, allLinkJointMasks)
if g_initFlag == 0:
preFootCenterL = footCenterL
preFootCenterR = footCenterR
preFootCenterL[1] -= 0.02
preFootCenterR[1] -= 0.02
preFootOrientationL = controlModel.getBodyOrientationGlobal(supL)
preFootOrientationR = controlModel.getBodyOrientationGlobal(supR)
softConstPoint = controlModel.getBodyPositionGlobal(constBody)
#softConstPoint[2] += 0.3
#softConstPoint[1] -= 1.1
#softConstPoint[0] += 0.1
softConstPoint[1] -= .3
#softConstPoint[0] -= .1
#softConstPoint[1] -= 1.
#softConstPoint[0] -= .5
g_initFlag = 1
yjc.computeJacobian2(JsupL, DOFs, jointPositions, jointAxeses,
[footCenterL], supLJointMasks)
dJsupL = (JsupL - JsupPreL) / (1 / 30.)
JsupPreL = JsupL
#yjc.computeJacobianDerivative2(dJsupL, DOFs, jointPositions, jointAxeses, linkAngVelocities, [footCenterL], supLJointMasks, False)
yjc.computeJacobian2(JsupR, DOFs, jointPositions, jointAxeses,
[footCenterR], supRJointMasks)
dJsupR = (JsupR - JsupPreR) / (1 / 30.)
JsupPreR = JsupR
#yjc.computeJacobianDerivative2(dJsupR, DOFs, jointPositions, jointAxeses, linkAngVelocities, [footCenterR], supRJointMasks, False)
preFootCenter = preFootCenterL + (preFootCenterR -
preFootCenterL) / 2.0
preFootCenter[1] = 0
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(
bodyIDsToCheck, mus, Ks, Ds)
CP = yrp.getCP(contactPositions, contactForces)
# linear momentum
CM_ref_plane = footCenter
#CM_ref_plane = preFootCenter
dL_des_plane = Kl * totalMass * (CM_ref_plane -
CM_plane) - Dl * totalMass * dCM_plane
#print("dL_des_plane ", dL_des_plane )
#dL_des_plane[1] = 0.
# angular momentum
CP_ref = footCenter
timeStep = 30.
if CP_old[0] == None or CP == None:
dCP = None
else:
dCP = (CP - CP_old[0]) / (1 / timeStep)
CP_old[0] = CP
if CP != None and dCP != None:
ddCP_des = Kh * (CP_ref - CP) - Dh * (dCP)
CP_des = CP + dCP * (1 / timeStep) + .5 * ddCP_des * (
(1 / timeStep)**2)
dH_des = np.cross(
(CP_des - CM),
(dL_des_plane + totalMass * mm.s2v(wcfg.gravity)))
#dH_des = np.cross((CP_des - CM_plane), (dL_des_plane + totalMass*mm.s2v(wcfg.gravity)))
#dH_des = [0, 0, 0]
else:
dH_des = None
CMP = yrp.getCMP(contactForces, CM)
r = [0, 0, 0]
if CP != None and np.any(np.isnan(CMP)) != True:
r = CP - CMP
#print("r.l", mm.length(r))
#Bba = Bh*(mm.length(r))
Bba = Bh
# momentum matrix
RS = np.dot(P, Jsys)
R, S = np.vsplit(RS, 2)
rs = np.dot((np.dot(dP, Jsys) + np.dot(P, dJsys)), dth_flat)
r_bias, s_bias = np.hsplit(rs, 2)
##############################
# soft point constraint
'''
cmDiff = footCenter - CM_plane
print("cmDiff", cmDiff)
if stage == 3:
softConstPoint +=
'''
P_des = softConstPoint
P_cur = controlModel.getBodyPositionGlobal(constBody)
dP_des = [0, 0, 0]
dP_cur = controlModel.getBodyVelocityGlobal(constBody)
ddP_des1 = Ksc * (P_des - P_cur) - Dsc * (dP_cur - dP_des)
r = P_des - P_cur
I = np.vstack(([1, 0, 0], [0, 1, 0], [0, 0, 1]))
Z = np.hstack((I, mm.getCrossMatrixForm(-r)))
yjc.computeJacobian2(Jconst, DOFs, jointPositions, jointAxeses,
[softConstPoint], constJointMasks)
JL, JA = np.vsplit(Jconst, 2)
Q1 = np.dot(Z, Jconst)
q1 = np.dot(JA, dth_flat)
q2 = np.dot(mm.getCrossMatrixForm(q1),
np.dot(mm.getCrossMatrixForm(q1), r))
yjc.computeJacobianDerivative2(dJconst, DOFs, jointPositions,
jointAxeses, linkAngVelocities,
[softConstPoint], constJointMasks,
False)
q_bias1 = np.dot(np.dot(Z, dJconst), dth_flat) + q2
'''
P_des = preFootCenterR
P_cur = controlModel.getBodyPositionGlobal(supR)
P_cur[1] = 0
dP_des = [0, 0, 0]
dP_cur = controlModel.getBodyVelocityGlobal(supR)
ddP_des2 = Kp*(P_des - P_cur) - Dp*(dP_cur - dP_des)
r = P_des - P_cur
#print("r2", r)
I = np.vstack(([1,0,0],[0,1,0],[0,0,1]))
Z = np.hstack((I, mm.getCrossMatrixForm(-r)))
JL, JA = np.vsplit(JsupR, 2)
Q2 = np.dot(Z, JsupR)
q1 = np.dot(JA, dth_flat)
q2 = np.dot(mm.getCrossMatrixForm(q1), np.dot(mm.getCrossMatrixForm(q1), r))
q_bias2 = np.dot(np.dot(Z, dJsupR), dth_flat) + q2
'''
#print("Q1", Q1)
'''
print("ddP_des1", ddP_des1)
q_ddth1 = np.dot(Q1, ddth_c_flat)
print("q_ddth1", q_ddth1)
print("q_bias1", q_bias1)
ddp1 = q_ddth1+q_bias1
print("ddp1", ddp1)
print("diff1", ddP_des1-ddp1)
'''
'''
print("ddP_des2", ddP_des2)
q_ddth2 = np.dot(Q2, ddth_c_flat)
print("q_ddth2", q_ddth2)
print("q_bias2", q_bias2)
ddp2 = q_ddth2+q_bias2
print("ddp2", ddp2)
print("diff2", ddP_des2-ddp2)
'''
##############################
############################
# IK
'''
P_des = preFootCenterL
P_cur = controlModel.getJointPositionGlobal(supL)
r = P_des - P_cur
Q_des = preFootOrientationL
Q_cur = controlModel.getJointOrientationGlobal(supL)
rv = mm.logSO3(np.dot(Q_cur.transpose(), Q_des))
#print("rv", rv)
des_v_sup = (r[0],r[1],r[2], rv[0], rv[1], rv[2])
A_large = np.dot(JsupL.T, JsupL)
b_large = np.dot(JsupL.T, des_v_sup)
des_d_th = npl.lstsq(A_large, b_large)
ype.nested(des_d_th[0], d_th_IK_L)
P_des2 = preFootCenterR
P_cur2 = controlModel.getJointPositionGlobal(supR)
r2 = P_des2 - P_cur2
Q_des2 = preFootOrientationR
Q_cur2 = controlModel.getJointOrientationGlobal(supR)
rv2 = mm.logSO3(np.dot(Q_cur2.transpose(), Q_des2))
#print("Q_des2", Q_des2)
#print("Q_cur2", Q_cur2)
#print("rv2", rv2)
des_v_sup2 = (r2[0],r2[1],r2[2], rv2[0], rv2[1], rv[2])
A_large = np.dot(JsupR.T, JsupR)
b_large = np.dot(JsupR.T, des_v_sup2)
des_d_th = npl.lstsq(A_large, b_large)
ype.nested(des_d_th[0], d_th_IK_R)
for i in range(len(d_th_IK_L)):
for j in range(len(d_th_IK_L[i])):
d_th_IK[i][j] = d_th_IK_L[i][j] + d_th_IK_R[i][j]
th_IK = yct.getIntegralDOF(th, d_th_IK, 1/timeStep)
dd_th_IK = yct.getDesiredDOFAccelerations(th_IK, th, d_th_IK, dth, ddth_r, Kk, Dk)
ype.flatten(d_th_IK, d_th_IK_flat)
ype.flatten(dd_th_IK, dd_th_IK_flat)
'''
############################
flagContact = True
if dH_des == None or np.any(np.isnan(dH_des)) == True:
flagContact = False
'''
0 : initial
1 : contact
2 : fly
3 : landing
'''
if flagContact == False:
if stage == 1:
stage = 2
print("fly")
else:
if stage == 0:
stage = 1
print("contact")
elif stage == 2:
stage = 3
print("landing")
if stage == 3:
Bt = Bt * 0.8
Bl = Bl * 1
# optimization
mot.addTrackingTerms(problem, totalDOF, Bt, w, ddth_des_flat)
#mot.addTrackingTerms(problem, totalDOF, Bk, w_IK, dd_th_IK_flat)
mot.addSoftPointConstraintTerms(problem, totalDOF, Bsc, ddP_des1, Q1,
q_bias1)
#mot.addSoftPointConstraintTerms(problem, totalDOF, Bp, ddP_des2, Q2, q_bias2)
#mot.addConstraint(problem, totalDOF, JsupL, dJsupL, dth_flat, a_sup)
#mot.addConstraint(problem, totalDOF, JsupR, dJsupR, dth_flat, a_sup2)
desLinearAccL = [0, 0, 0]
desAngularAccL = [0, 0, 0]
desLinearAccR = [0, 0, 0]
desAngularAccR = [0, 0, 0]
refPos = motionModel.getBodyPositionGlobal(supL)
refPos[0] += ModelOffset[0]
refPos[1] = 0
refVel = motionModel.getBodyVelocityGlobal(supL)
curPos = controlModel.getBodyPositionGlobal(supL)
#curPos[1] = 0
curVel = controlModel.getBodyVelocityGlobal(supL)
refAcc = (0, 0, 0)
if stage == 3:
refPos = curPos
refPos[1] = 0
if curPos[1] < 0.0:
curPos[1] = 0
else:
curPos[1] = 0
rd_DesPosL[0] = refPos
#(p_r, p, v_r, v, a_r, Kt, Dt)
desLinearAccL = yct.getDesiredAcceleration(refPos, curPos, refVel,
curVel, refAcc, Kk, Dk)
#desLinearAccL[1] = 0
refPos = motionModel.getBodyPositionGlobal(supR)
refPos[0] += ModelOffset[0]
refPos[1] = 0
refVel = motionModel.getBodyVelocityGlobal(supR)
curPos = controlModel.getBodyPositionGlobal(supR)
#curPos[1] = 0
curVel = controlModel.getBodyVelocityGlobal(supR)
if stage == 3:
refPos = curPos
refPos[1] = 0
if curPos[1] < 0.0:
curPos[1] = 0
else:
curPos[1] = 0
rd_DesPosR[0] = refPos
desLinearAccR = yct.getDesiredAcceleration(refPos, curPos, refVel,
curVel, refAcc, Kk, Dk)
#desLinearAccR[1] = 0
#(th_r, th, dth_r, dth, ddth_r, Kt, Dt)
refAng = [preFootOrientationL]
curAng = [controlModel.getBodyOrientationGlobal(supL)]
refAngVel = motionModel.getBodyAngVelocityGlobal(supL)
curAngVel = controlModel.getBodyAngVelocityGlobal(supL)
refAngAcc = (0, 0, 0)
#desAngularAccL = yct.getDesiredAngAccelerations(refAng, curAng, refAngVel, curAngVel, refAngAcc, Kk, Dk)
curAngY = np.dot(curAng, np.array([0, 1, 0]))
aL = mm.logSO3(mm.getSO3FromVectors(curAngY[0], np.array([0, 1, 0])))
print("curAngYL=", curAngY, "aL=", aL)
desAngularAccL = [Kk * aL + Dk * (refAngVel - curAngVel)]
refAng = [preFootOrientationR]
curAng = [controlModel.getBodyOrientationGlobal(supR)]
refAngVel = motionModel.getBodyAngVelocityGlobal(supR)
curAngVel = controlModel.getBodyAngVelocityGlobal(supR)
refAngAcc = (0, 0, 0)
#desAngularAccR = yct.getDesiredAngAccelerations(refAng, curAng, refAngVel, curAngVel, refAngAcc, Kk, Dk)
curAngY = np.dot(curAng, np.array([0, 1, 0]))
aL = mm.logSO3(mm.getSO3FromVectors(curAngY[0], np.array([0, 1, 0])))
desAngularAccR = [Kk * aL + Dk * (refAngVel - curAngVel)]
print("curAngYR=", curAngY, "aL=", aL)
a_sup_2 = [
desLinearAccL[0], desLinearAccL[1], desLinearAccL[2],
desAngularAccL[0][0], desAngularAccL[0][1], desAngularAccL[0][2],
desLinearAccR[0], desLinearAccR[1], desLinearAccR[2],
desAngularAccR[0][0], desAngularAccR[0][1], desAngularAccR[0][2]
]
if stage == 2: #or stage == 3:
refAccL = motionModel.getBodyAccelerationGlobal(supL)
refAndAccL = motionModel.getBodyAngAccelerationGlobal(supL)
refAccR = motionModel.getBodyAccelerationGlobal(supR)
refAndAccR = motionModel.getBodyAngAccelerationGlobal(supR)
a_sup_2 = [
refAccL[0], refAccL[1], refAccL[2], refAndAccL[0],
refAndAccL[1], refAndAccL[2], refAccR[0], refAccR[1],
refAccR[2], refAndAccR[0], refAndAccR[1], refAndAccR[2]
]
'''
a_sup_2 = [0,0,0, desAngularAccL[0][0], desAngularAccL[0][1], desAngularAccL[0][2],
0,0,0, desAngularAccR[0][0], desAngularAccR[0][1], desAngularAccR[0][2]]
'''
Jsup_2 = np.vstack((JsupL, JsupR))
dJsup_2 = np.vstack((dJsupL, dJsupR))
if flagContact == True:
mot.addLinearTerms(problem, totalDOF, Bl, dL_des_plane, R, r_bias)
mot.addAngularTerms(problem, totalDOF, Bh, dH_des, S, s_bias)
mot.setConstraint(problem, totalDOF, Jsup_2, dJsup_2, dth_flat,
a_sup_2)
#mot.setConstraint(problem, totalDOF, JsupR, dJsupR, dth_flat, a_sup2)
#mot.setConstraint(problem, totalDOF, Jsup_2, dJsup_2, dth_flat, a_sup_2)
#mot.addConstraint(problem, totalDOF, Jsup_2, dJsup_2, d_th_IK_flat, a_sup_2)
'''
jZ = np.dot(dJsup_2.T, dJsup_2)
lamda = 0.001
for i in range(len(jZ)):
for j in range(len(jZ[0])):
if i == j :
jZ[i][j] += lamda
jZInv = npl.pinv(jZ)
jA = np.dot(Jsup_2, np.dot(jZInv, np.dot(dJsup_2.T, -Jsup_2)))
mot.addConstraint2(problem, totalDOF, jA, a_sup_2)
'''
r = problem.solve()
problem.clear()
ype.nested(r['x'], ddth_sol)
rootPos[0] = controlModel.getBodyPositionGlobal(selectedBody)
localPos = [[0, 0, 0]]
for i in range(stepsPerFrame):
# apply penalty force
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(
bodyIDsToCheck, mus, Ks, Ds)
vpWorld.applyPenaltyForce(bodyIDs, contactPositionLocals,
contactForces)
controlModel.setDOFAccelerations(ddth_sol)
controlModel.solveHybridDynamics()
extraForce[0] = viewer.GetForce()
if (extraForce[0][0] != 0 or extraForce[0][1] != 0
or extraForce[0][2] != 0):
forceApplyFrame += 1
vpWorld.applyPenaltyForce(selectedBodyId, localPos, extraForce)
applyedExtraForce[0] = extraForce[0]
if forceApplyFrame * wcfg.timeStep > 0.1:
viewer.ResetForce()
forceApplyFrame = 0
vpWorld.step()
# rendering
rd_footCenter[0] = footCenter
rd_footCenterL[0] = preFootCenterL
rd_footCenterR[0] = preFootCenterR
rd_CM[0] = CM
rd_CM_plane[0] = CM_plane.copy()
rd_footCenter_ref[0] = footCenter_ref
rd_CM_plane_ref[0] = CM_plane_ref.copy()
#rd_CM_plane[0][1] = 0.
if CP != None and dCP != None:
rd_CP[0] = CP
rd_CP_des[0] = CP_des
rd_dL_des_plane[0] = dL_des_plane
rd_dH_des[0] = dH_des
rd_grf_des[0] = dL_des_plane - totalMass * mm.s2v(wcfg.gravity)
rd_exf_des[0] = applyedExtraForce[0]
#print("rd_exf_des", rd_exf_des[0])
rd_root_des[0] = rootPos[0]
rd_CMP[0] = softConstPoint
rd_soft_const_vec[0] = controlModel.getBodyPositionGlobal(
constBody) - softConstPoint
#if (applyedExtraForce[0][0] != 0 or applyedExtraForce[0][1] != 0 or applyedExtraForce[0][2] != 0) :
if (forceApplyFrame == 0):
applyedExtraForce[0] = [0, 0, 0]
viewer.setPreFrameCallback_Always(preCallback)
viewer.setSimulateCallback(simulateCallback)
viewer.startTimer(1 / 60.)
viewer.show()
Fl.run()
def main():
np.set_printoptions(precision=4, linewidth=200)
# motion, mcfg, wcfg, stepsPerFrame, config = mit.create_vchain_5()
motion, mcfg, wcfg, stepsPerFrame, config = mit.create_biped()
mcfg_motion = mit.normal_mcfg()
vpWorld = cvw.VpWorld(wcfg)
motionModel = cvm.VpMotionModel(vpWorld, motion[0], mcfg)
motionModel.recordVelByFiniteDiff()
controlModel = cvm.VpControlModel(vpWorld, motion[0], mcfg)
footPartNum = config['FootPartNum']
if footPartNum > 1:
elasticity = 2000
damping = 2 * (elasticity**.5)
springBody1 = 5
springBody2 = 6
springBody1Pos = motionModel.getBodyPositionGlobal(
motion[0].skeleton.getJointIndex(config['FootLPart'][springBody1]))
springBody2Pos = motionModel.getBodyPositionGlobal(
motion[0].skeleton.getJointIndex(config['FootLPart'][springBody2]))
initialDist = mm.length(springBody1Pos - springBody2Pos) * 1.
node = mcfg.getNode(mit.LEFT_PHALANGE_1)
initialDist -= node.width #0.084
v1 = (-node.width * 0.5, 0.0, node.length * 0.4)
v2 = (node.width * 0.5, 0.0, node.length * 0.4)
controlModel.setSpring(
motion[0].skeleton.getJointIndex(config['FootLPart'][springBody1]),
motion[0].skeleton.getJointIndex(config['FootLPart'][springBody2]),
elasticity, damping, v2, v1, initialDist)
controlModel.setSpring(
motion[0].skeleton.getJointIndex(config['FootRPart'][springBody1]),
motion[0].skeleton.getJointIndex(config['FootRPart'][springBody2]),
elasticity, damping, v1, v2, initialDist)
#elasticity = 10
#damping = 2*(elasticity**.5)
#springBody1 = 3
#springBody2 = 4
#node = mcfg.getNode(mit.LEFT_PHALANGE_1)
#springBody1Pos = motionModel.getBodyPositionGlobal(motion[0].skeleton.getJointIndex(config['FootLPart'][springBody1]))
#springBody2Pos = motionModel.getBodyPositionGlobal(motion[0].skeleton.getJointIndex(config['FootLPart'][springBody2]))
#initialDist = mm.length(springBody1Pos - springBody2Pos)*1.
#initialDist -= node.width#0.084
#v1 = (-node.width*0.5,0.0,-node.length*0.4)
#v2 = (node.width*0.5,0.0,-node.length*0.4)
##controlModel.setSpring(motion[0].skeleton.getJointIndex(config['FootLPart'][springBody1]), motion[0].skeleton.getJointIndex(config['FootLPart'][springBody2]), elasticity, damping, v2, v1, initialDist)
##controlModel.setSpring(motion[0].skeleton.getJointIndex(config['FootRPart'][springBody1]), motion[0].skeleton.getJointIndex(config['FootRPart'][springBody2]), elasticity, damping, v1, v2, initialDist)
vpWorld.initialize()
controlModel.initializeHybridDynamics()
#ModelOffset = (1.5, -0.01, 0)
ModelOffset = (1.5, 0.4, 0)
controlModel.translateByOffset(ModelOffset)
totalDOF = controlModel.getTotalDOF()
DOFs = controlModel.getDOFs()
# parameter
Kt = config['Kt']
Dt = config['Dt'] # tracking gain
Kl = config['Kl']
Dl = config['Dl'] # linear balance gain
Kh = config['Kh']
Dh = config['Dh'] # angular balance gain
Ks = config['Ks']
Ds = config['Ds'] # penalty force spring gain
Bt = config['Bt']
Bl = config['Bl']
Bh = config['Bh']
w = mot.getTrackingWeight(DOFs, motion[0].skeleton, config['weightMap'])
w2 = mot.getTrackingWeight(DOFs, motion[0].skeleton, config['weightMap2'])
#w_IK = mot.getTrackingWeight(DOFs, motion[0].skeleton, config['IKweightMap'])
supL = motion[0].skeleton.getJointIndex(config['supLink'])
supR = motion[0].skeleton.getJointIndex(config['supLink2'])
rootB = motion[0].skeleton.getJointIndex(config['root'])
selectedBody = motion[0].skeleton.getJointIndex(config['end'])
#constBody = motion[0].skeleton.getJointIndex('LeftForeArm')
constBody = motion[0].skeleton.getJointIndex(config['const'])
# jacobian
Jsup = yjc.makeEmptyJacobian(DOFs, 1)
dJsup = Jsup.copy()
JsupPre = Jsup.copy()
Jsys = yjc.makeEmptyJacobian(DOFs, controlModel.getBodyNum())
dJsys = Jsys.copy()
JsysPre = Jsys.copy()
Jconst = yjc.makeEmptyJacobian(DOFs, 1)
dJconst = Jconst.copy()
Jcom = yjc.makeEmptyJacobian(DOFs, 1, False)
dJcom = Jcom.copy()
JcomAng = yjc.makeEmptyJacobian(DOFs, 1, False)
dJcomAng = JcomAng.copy()
###############
indexFootL = [None] * footPartNum
indexFootR = [None] * footPartNum
jFootL = [None] * footPartNum
dJFootL = [None] * footPartNum
jFootR = [None] * footPartNum
dJFootR = [None] * footPartNum
jointMasksFootL = [None] * footPartNum
jointMasksFootR = [None] * footPartNum
for i in range(footPartNum):
jFootL[i] = yjc.makeEmptyJacobian(DOFs, 1)
dJFootL[i] = jFootL[i].copy()
jFootR[i] = yjc.makeEmptyJacobian(DOFs, 1)
dJFootR[i] = jFootR[i].copy()
indexFootL[i] = motion[0].skeleton.getJointIndex(
config['FootLPart'][i])
indexFootR[i] = motion[0].skeleton.getJointIndex(
config['FootRPart'][i])
jointMasksFootL[i] = [
yjc.getLinkJointMask(motion[0].skeleton, indexFootL[i])
]
jointMasksFootR[i] = [
yjc.getLinkJointMask(motion[0].skeleton, indexFootR[i])
]
constJointMasks = [
yjc.getLinksJointMask(motion[0].skeleton,
[indexFootL[0], indexFootR[0]])
]
#constJointMasks = [yjc.getLinksJointMask(motion[0].skeleton, [indexFootL[0]])]
#constJointMasks = [yjc.getLinkJointMask(motion[0].skeleton, constBody)]
allLinkJointMasks = yjc.getAllLinkJointMasks(motion[0].skeleton)
#comLowerJointMasks = [yjc.getLinksJointMask(motion[0].skeleton, [motion[0].skeleton.getJointIndex('LeftLeg'), motion[0].skeleton.getJointIndex('RightLeg')])]
comUpperJointMasks = [
yjc.getLinkJointMask(motion[0].skeleton, selectedBody)
]
#comLowerJointMasks = [yjc.getLinksJointMask(motion[0].skeleton, [motion[0].skeleton.getJointIndex('LeftLeg'), motion[0].skeleton.getJointIndex('RightLeg')])]
comUpperJointMasks[0][0] = 0
#comUpperJointMasks[0][1] = 1
#comUpperJointMasks[0][10] = 1
comUpperJointMasks[0][2] = 1
comUpperJointMasks[0][11] = 1
#print(comUpperJointMasks)
comLowerJointMasks = [
yjc.getLinksJointMask(motion[0].skeleton, [
motion[0].skeleton.getJointIndex('LeftLeg'),
motion[0].skeleton.getJointIndex('RightLeg')
])
]
'''
maskArray = [foreSupLJointMasks, foreSupRJointMasks, rearSupLJointMasks, rearSupRJointMasks]
parentArray = [supL, supR, supL, supR]
effectorArray = [foreSupL, foreSupR, rearSupL, rearSupR]
for j in range(4) :
for i in range(len(foreSupLJointMasks)) :
if i == parentArray[j] or i == effectorArray[j] :
maskArray[j][0][i] = 1
else :
maskArray[j][0][i] = 0
'''
# momentum matrix
linkMasses = controlModel.getBodyMasses()
totalMass = controlModel.getTotalMass()
TO = ymt.make_TO(linkMasses)
dTO = ymt.make_dTO(len(linkMasses))
# optimization
problem = yac.LSE(totalDOF, 6)
a_sup = (0, 0, 0, 0, 0, 0) #L
#a_sup2 = (0,0,0, 0,0,0)#R
a_sup2 = [0, 0, 0, 0, 0, 0] #R
a_sup_2 = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
CP_old = [mm.v3(0., 0., 0.)]
# penalty method
bodyIDsToCheck = range(vpWorld.getBodyNum())
mus = [1.] * len(bodyIDsToCheck)
# flat data structure
ddth_des_flat = ype.makeFlatList(totalDOF)
dth_flat = ype.makeFlatList(totalDOF)
ddth_sol = ype.makeNestedList(DOFs)
d_th_IK = ype.makeNestedList(DOFs)
d_th_IK_L = ype.makeNestedList(DOFs)
d_th_IK_R = ype.makeNestedList(DOFs)
dd_th_IK = ype.makeNestedList(DOFs)
dd_th_IK_flat = ype.makeFlatList(totalDOF)
d_th_IK_flat = ype.makeFlatList(totalDOF)
ddth_c_flat = ype.makeFlatList(totalDOF)
# viewer
rd_footCenter = [None]
rd_footCenter_ref = [None]
rd_footCenterL = [None]
rd_footCenterR = [None]
rd_CM_plane = [None]
rd_CM_plane_ref = [None]
rd_CM_ref = [None]
rd_CM_des = [None]
rd_CM = [None]
rd_CM_vec = [None]
rd_CM_ref_vec = [None]
rd_CP = [None]
rd_CP_des = [None]
rd_dL_des_plane = [None]
rd_dH_des = [None]
rd_grf_des = [None]
rd_footCenter_des = [None]
rd_exf_des = [None]
rd_root_des = [None]
rd_soft_const_vec = [None]
rd_root = [None]
rd_footL_vec = [None]
rd_footR_vec = [None]
rd_CMP = [None]
rd_DesPosL = [None]
rd_DesPosR = [None]
rd_DesForePosL = [None]
rd_DesForePosR = [None]
rd_DesRearPosL = [None]
rd_DesRearPosR = [None]
rd_Joint = [None]
rd_Joint2 = [None]
rd_Joint3 = [None]
rd_Joint4 = [None]
rd_desPoints = [None]
#rd_contactForces = [None]*10000
#rd_contactPositions = [None]*10000
rd_virtualForce = [None]
rootPos = [None]
selectedBodyId = [selectedBody]
extraForce = [None]
applyedExtraForce = [None]
applyedExtraForce[0] = [0, 0, 0]
normalVector = [[0, 2, 0]]
if MULTI_VIEWER:
viewer = ymv.MultiViewer(800, 655)
#viewer = ymv.MultiViewer(1600, 1255)
viewer.setRenderers1([
cvr.VpModelRenderer(motionModel, CHARACTER_COLOR, yr.POLYGON_FILL)
])
viewer.setRenderers2([
cvr.VpModelRenderer(controlModel, CHARACTER_COLOR, yr.POLYGON_FILL)
])
else:
viewer = ysv.SimpleViewer()
# viewer.record(False)
# viewer.doc.addRenderer('motion', yr.JointMotionRenderer(motion, (0,255,255), yr.LINK_BONE))
viewer.doc.addObject('motion', motion)
viewer.doc.addRenderer(
'motionModel',
cvr.VpModelRenderer(motionModel, (100, 100, 100),
yr.POLYGON_FILL)) #(150,150,255)
viewer.doc.addRenderer(
'controlModel',
cvr.VpModelRenderer(controlModel, CHARACTER_COLOR,
yr.POLYGON_FILL))
#viewer.doc.addRenderer('controlModel', cvr.VpModelRenderer(controlModel, CHARACTER_COLOR, yr.POLYGON_LINE))
#viewer.doc.addRenderer('rd_footCenter', yr.PointsRenderer(rd_footCenter))
#viewer.doc.addRenderer('rd_footCenter_des', yr.PointsRenderer(rd_footCenter_des, (150,0,150)) )
#viewer.doc.addRenderer('rd_footCenterL', yr.PointsRenderer(rd_footCenterL))
#viewer.doc.addRenderer('rd_footCenterR', yr.PointsRenderer(rd_footCenterR))
viewer.doc.addRenderer('rd_CM_plane',
yr.PointsRenderer(rd_CM_plane, (255, 255, 0)))
viewer.doc.addRenderer('rd_CM',
yr.PointsRenderer(rd_CM, (255, 0, 255)))
viewer.doc.addRenderer('rd_CM_des',
yr.PointsRenderer(rd_CM_des, (64, 64, 255)))
viewer.doc.addRenderer(
'rd_CM_vec',
yr.VectorsRenderer(rd_CM_vec, rd_CM_plane, (255, 0, 0), 3))
#viewer.doc.addRenderer('rd_CP_des', yr.PointsRenderer(rd_CP_des, (0,255,0)))
viewer.doc.addRenderer('rd_CP_des',
yr.PointsRenderer(rd_CP_des, (255, 0, 128)))
# viewer.doc.addRenderer('rd_dL_des_plane', yr.VectorsRenderer(rd_dL_des_plane, rd_CM, (255,255,0)))
# viewer.doc.addRenderer('rd_dH_des', yr.VectorsRenderer(rd_dH_des, rd_CM, (0,255,0)))
#viewer.doc.addRenderer('rd_grf_des', yr.ForcesRenderer(rd_grf_des, rd_CP, (0,255,255), .001))
viewer.doc.addRenderer(
'rd_exf_des',
yr.ForcesRenderer(rd_exf_des, rd_root_des, (0, 255, 0), .009,
0.04))
#viewer.doc.addRenderer('rd_CMP', yr.PointsRenderer(rd_CMP, (0,0,255)))
#viewer.doc.addRenderer('rd_DesPosL', yr.PointsRenderer(rd_DesPosL, (0,0,255)))
#viewer.doc.addRenderer('rd_DesPosR', yr.PointsRenderer(rd_DesPosR, (0,100,255)))
#viewer.doc.addRenderer('rd_DesForePosL', yr.PointsRenderer(rd_DesForePosL, (150,0,200)))
#viewer.doc.addRenderer('rd_DesForePosR', yr.PointsRenderer(rd_DesForePosR, (150,0,250)))
#viewer.doc.addRenderer('rd_DesRearPosL', yr.PointsRenderer(rd_DesRearPosL, (0,150,200)))
#viewer.doc.addRenderer('rd_DesRearPosR', yr.PointsRenderer(rd_DesRearPosR, (0,150,250)))
#viewer.doc.addRenderer('softConstraint', yr.VectorsRenderer(rd_soft_const_vec, rd_CMP, (150,100,100), 3))
#viewer.doc.addRenderer('rd_footLVec', yr.VectorsRenderer(rd_footL_vec, rd_footCenterL, (255,0,0), 3))
#viewer.doc.addRenderer('rd_footRVec', yr.VectorsRenderer(rd_footR_vec, rd_footCenterR, (255,255,0), 3))
#viewer.doc.addRenderer('rd_footCenter_ref', yr.PointsRenderer(rd_footCenter_ref))
#viewer.doc.addRenderer('rd_CM_plane_ref', yr.PointsRenderer(rd_CM_plane_ref, (255,255,0)))
#viewer.doc.addRenderer('rd_refNormalVec', yr.VectorsRenderer(normalVector, rd_footCenter_ref, (255,0,0), 3))
#viewer.doc.addRenderer('rd_refCMVec', yr.VectorsRenderer(rd_CM_ref_vec, rd_footCenter_ref, (255,0,255), 3))
#viewer.doc.addRenderer('rd_curNormalVec', yr.VectorsRenderer(normalVector, rd_footCenter, (255,0,0), 3))
#viewer.doc.addRenderer('rd_CMVec', yr.VectorsRenderer(rd_CM_vec, rd_footCenter, (255,0,255), 3))
#viewer.doc.addRenderer('rd_contactForces', yr.ForcesRenderer(rd_contactForces, rd_contactPositions, (0,255,0), .009, 0.009))
#viewer.doc.addRenderer('rd_virtualForce', yr.ForcesRenderer(rd_virtualForce, rd_CM, (50,255,0), 0.5, 0.02))
#viewer.doc.addRenderer('rd_Joint', yr.PointsRenderer(rd_Joint, (255,0,0)))
#viewer.doc.addRenderer('rd_Joint2', yr.PointsRenderer(rd_Joint2, (0,255,0)))
#viewer.doc.addRenderer('rd_Joint3', yr.PointsRenderer(rd_Joint3, (0,0,255)))
#viewer.doc.addRenderer('rd_Joint4', yr.PointsRenderer(rd_Joint4, (255,255,0)))
viewer.doc.addRenderer('rd_desPoints',
yr.PointsRenderer(rd_desPoints, (255, 0, 0)))
stage = STATIC_BALANCING
contactRendererName = []
for i in range(motion[0].skeleton.getJointNum()):
print(i, motion[0].skeleton.getJointName(i))
desCOMOffset = 0.0
pt = [0.]
timeReport = [0.] * 7
viewer.objectInfoWnd.comOffsetY.value(-0.05)
viewer.objectInfoWnd.comOffsetZ.value(0.00)
viewer.objectInfoWnd.begin()
viewer.objectInfoWnd.Bc = Fl_Value_Input(100, 450, 40, 10, 'Bc')
viewer.objectInfoWnd.Bc.value(0.1)
viewer.objectInfoWnd.end()
viewer.objectInfoWnd.labelKt.value(50)
viewer.objectInfoWnd.labelKk.value(17)
def simulateCallback(frame):
curTime = time.time()
if frame % 30 == 1: pt[0] = time.time()
global g_initFlag
global forceShowFrame
global forceApplyFrame
global JsysPre
global JsupPreL
global JsupPreR
global JsupPre
global softConstPoint
global stage
global contactRendererName
global desCOMOffset
motionModel.update(motion[0])
Kt, Kk, Kl, Kh, Ksc, Bt, Bl, Bh, B_CM, B_CMSd, B_Toe = viewer.GetParam(
)
Dt = 2 * (Kt**.5)
Dk = 2 * (Kk**.5)
Dl = 2 * (Kl**.5)
Dh = 2 * (Kh**.5)
Dsc = 2 * (Ksc**.5)
# tracking
th_r_ori = motion.getDOFPositions(frame)
th_r = copy.copy(th_r_ori)
############################
#Reference motion modulation
dCM_k = 10.
linkVelocities = controlModel.getBodyVelocitiesGlobal()
dCM = yrp.getCM(linkVelocities, linkMasses, totalMass)
dCM_plane = copy.copy(dCM)
dCM_plane[1] = 0.
global leftHipTimer
if viewer.objectInfoWnd.onLeftHip:
leftHipTimer = 60
viewer.objectInfoWnd.onLeftHip = False
if leftHipTimer > 0:
viewer.objectInfoWnd.comOffsetX.value(
0.08 * np.sin(2 * 3.14 * leftHipTimer / 60.))
#viewer.objectInfoWnd.comOffsetZ.value(0.04*np.cos(2*3.14*leftHipTimer/90.))
#B_Hipd = viewer.objectInfoWnd.labelLeftHip.value()
#newR1 = mm.exp(mm.v3(0.0,1.0,0.0), 3.14*0.5*B_Hipd/100.)
#idx = motion[0].skeleton.getJointIndex('LeftUpLeg')
#th_r[idx] = np.dot(th_r[idx], newR1)
#idx = motion[0].skeleton.getJointIndex('RightUpLeg')
#th_r[idx] = np.dot(th_r[idx], newR1)
leftHipTimer -= 1
timeReport[0] += time.time() - curTime
curTime = time.time()
th = controlModel.getDOFPositions()
dth_r = motion.getDOFVelocities(frame)
dth = controlModel.getDOFVelocities()
ddth_r = motion.getDOFAccelerations(frame)
ddth_des = yct.getDesiredDOFAccelerations(th_r, th, dth_r, dth, ddth_r,
Kt, Dt)
ddth_c = controlModel.getDOFAccelerations()
ype.flatten(ddth_des, ddth_des_flat)
ype.flatten(dth, dth_flat)
ype.flatten(ddth_c, ddth_c_flat)
# jacobian
refFootL = motionModel.getBodyPositionGlobal(supL)
refFootR = motionModel.getBodyPositionGlobal(supR)
positionFootL = [None] * footPartNum
positionFootR = [None] * footPartNum
for i in range(footPartNum):
positionFootL[i] = controlModel.getBodyPositionGlobal(
indexFootL[i])
positionFootR[i] = controlModel.getBodyPositionGlobal(
indexFootR[i])
linkPositions = controlModel.getBodyPositionsGlobal()
linkVelocities = controlModel.getBodyVelocitiesGlobal()
linkAngVelocities = controlModel.getBodyAngVelocitiesGlobal()
linkInertias = controlModel.getBodyInertiasGlobal()
jointPositions = controlModel.getJointPositionsGlobal()
jointAxeses = controlModel.getDOFAxeses()
CM = yrp.getCM(linkPositions, linkMasses, totalMass)
dCM = yrp.getCM(linkVelocities, linkMasses, totalMass)
CM_plane = copy.copy(CM)
CM_plane[1] = 0.
dCM_plane = copy.copy(dCM)
dCM_plane[1] = 0.
linkPositions_ref = motionModel.getBodyPositionsGlobal()
linkVelocities_ref = motionModel.getBodyVelocitiesGlobal()
linkAngVelocities_ref = motionModel.getBodyAngVelocitiesGlobal()
linkInertias_ref = motionModel.getBodyInertiasGlobal()
CM_ref = yrp.getCM(linkPositions_ref, linkMasses, totalMass)
CM_plane_ref = copy.copy(CM_ref)
CM_plane_ref[1] = 0.
P = ymt.getPureInertiaMatrix(TO, linkMasses, linkPositions, CM,
linkInertias)
dP = ymt.getPureInertiaMatrixDerivative(dTO, linkMasses,
linkVelocities, dCM,
linkAngVelocities,
linkInertias)
timeReport[1] += time.time() - curTime
curTime = time.time()
yjc.computeJacobian2(Jsys, DOFs, jointPositions, jointAxeses,
linkPositions, allLinkJointMasks)
timeReport[2] += time.time() - curTime
curTime = time.time()
# yjc.computeJacobianDerivative2(dJsys, DOFs, jointPositions, jointAxeses, linkAngVelocities, linkPositions, allLinkJointMasks)
if frame > 0:
dJsys = (Jsys - JsysPre) * 30.
else:
dJsys = (Jsys - Jsys)
JsysPre = Jsys.copy()
timeReport[3] += time.time() - curTime
curTime = time.time()
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(
bodyIDsToCheck, mus, Ks, Ds)
CP = yrp.getCP(contactPositions, contactForces)
if CP != None:
CP[1] = 0.
for i in range(len(bodyIDsToCheck)):
controlModel.SetBodyColor(bodyIDsToCheck[i], 0, 0, 0, 255)
contactFlagFootL = [0] * footPartNum
contactFlagFootR = [0] * footPartNum
for i in range(len(bodyIDs)):
controlModel.SetBodyColor(bodyIDs[i], 255, 105, 105, 200)
index = controlModel.id2index(bodyIDs[i])
for j in range(len(indexFootL)):
if index == indexFootL[j]:
contactFlagFootL[j] = 1
for j in range(len(indexFootR)):
if index == indexFootR[j]:
contactFlagFootR[j] = 1
for j in range(0, footPartNum):
jFootR[j] = Jsys[6 * indexFootR[j]:6 * indexFootR[j] + 6] #.copy()
jFootL[j] = Jsys[6 * indexFootL[j]:6 * indexFootL[j] + 6] #.copy()
dJFootR[j] = dJsys[6 * indexFootR[j]:6 * indexFootR[j] +
6] #.copy()
dJFootL[j] = dJsys[6 * indexFootL[j]:6 * indexFootL[j] +
6] #.copy()
if footPartNum == 1:
desFCL = (controlModel.getBodyPositionGlobal(supL))
desFCR = (controlModel.getBodyPositionGlobal(supR))
else:
r = .5 + desCOMOffset
desFCL = (controlModel.getBodyPositionGlobal(indexFootL[0]) * r +
controlModel.getBodyPositionGlobal(indexFootL[1]) *
(1.0 - r)
) #controlModel.getBodyPositionGlobal(indexFootL[1])
desFCR = (controlModel.getBodyPositionGlobal(indexFootR[0]) * r +
controlModel.getBodyPositionGlobal(indexFootR[1]) *
(1.0 - r)
) #controlModel.getBodyPositionGlobal(indexFootR[1])
desFC = desFCL + (desFCR - desFCL) / 2.0
desFC[1] = 0
rd_footCenter_des[0] = desFC.copy()
curRelCMVec = CM_plane - desFC
vecRatio = mm.length(curRelCMVec) * 0.
#print(frame, vecRatio)
footCenter = desFC - curRelCMVec * (vecRatio) #/10.0
footCenter = (
getBodyGlobalPos(controlModel, motion, 'LeftCalcaneus_1') +
getBodyGlobalPos(controlModel, motion, 'LeftPhalange_1') +
getBodyGlobalPos(controlModel, motion, 'RightCalcaneus_1') +
getBodyGlobalPos(controlModel, motion, 'RightPhalange_1')) / 4.
#footCenter = (getBodyGlobalPos(controlModel, motion, 'LeftCalcaneus_1') + getBodyGlobalPos(controlModel, motion, 'LeftTalus_1') + getBodyGlobalPos(controlModel, motion, 'RightCalcaneus_1') + getBodyGlobalPos(controlModel, motion, 'RightTalus_1'))/4.
footCenter_ref = refFootL + (refFootR - refFootL) / 2.0
#footCenter_ref[1] = 0.
footCenter[1] = 0.
footCenterOffset = np.array([
viewer.objectInfoWnd.comOffsetX.value(), 0,
viewer.objectInfoWnd.comOffsetZ.value()
])
#footCenter += footCenterOffset
vecRatio = mm.length(curRelCMVec) * 0.
softConstPointOffset = -curRelCMVec * (vecRatio) #/10.0
#print(frame, vecRatio, softConstPointOffset)
desForeSupLAcc = [0, 0, 0]
desForeSupRAcc = [0, 0, 0]
totalNormalForce = [0, 0, 0]
for i in range(len(contactForces)):
totalNormalForce[0] += contactForces[i][0]
totalNormalForce[1] += contactForces[i][1]
totalNormalForce[2] += contactForces[i][2]
#print((totalMass*mm.s2v(wcfg.gravity))[1])
footCenterOffset = np.array([
viewer.objectInfoWnd.comOffsetX.value(),
viewer.objectInfoWnd.comOffsetY.value(),
viewer.objectInfoWnd.comOffsetZ.value()
])
######################
# optimization terms
######################
# linear momentum
CM_ref_plane = footCenter + footCenterOffset
dL_des_plane = Kl * totalMass * (CM_ref_plane -
CM_plane) - Dl * totalMass * dCM_plane
dL_des_plane[1] = Kl * totalMass * (CM_ref[1] + footCenterOffset[1] -
CM[1]) - Dl * totalMass * dCM[1]
#dL_des_plane[1] = 0.
#print 'dL_des_plane', dL_des_plane
# angular momentum
CP_ref = footCenter + footCenterOffset
CP_ref[1] = 0.
timeStep = 30.
if CP_old[0] == None or CP == None:
dCP = None
else:
dCP = (CP - CP_old[0]) * timeStep
CP_old[0] = CP
if CP != None and dCP != None:
ddCP_des = Kh * (CP_ref - CP) - Dh * (dCP)
CP_des = CP + dCP * (1 / timeStep) + .5 * ddCP_des * (
(1 / timeStep)**2)
#print 'dCP: ', dCP
#print 'ddCP_des: ', ddCP_des
#print 'CP_des: ', CP_des
#dH_des = np.cross((CP_des - CM), (dL_des_plane + totalMass*mm.s2v(wcfg.gravity)))
dH_des = np.cross(
(CP_des - CM_plane),
(dL_des_plane + totalMass * mm.s2v(wcfg.gravity)))
else:
dH_des = None
# momentum matrix
RS = np.dot(P, Jsys)
R, S = np.vsplit(RS, 2)
rs = np.dot((np.dot(dP, Jsys) + np.dot(P, dJsys)), dth_flat)
r_bias, s_bias = np.hsplit(rs, 2)
flagContact = True
if dH_des == None or np.any(np.isnan(dH_des)) == True:
flagContact = False
#viewer.doc.showRenderer('rd_grf_des', False)
#viewer.motionViewWnd.update(1, viewer.doc)
#else:
#viewer.doc.showRenderer('rd_grf_des', True)
#viewer.motionViewWnd.update(1, viewer.doc)
'''
0 : initial
1 : contact
2 : fly
3 : landing
'''
#MOTION = FORWARD_JUMP
if mit.MOTION == mit.FORWARD_JUMP:
frame_index = [136, 100]
#frame_index = [100000, 100000]
elif mit.MOTION == mit.TAEKWONDO:
frame_index = [130, 100]
#frame_index = [100000, 100000]
elif mit.MOTION == mit.TAEKWONDO2:
frame_index = [130 + 40, 100]
elif mit.MOTION == mit.WALK:
frame_index = [10000, 60]
elif mit.MOTION == mit.TIPTOE:
frame_index = [1000000, 1000000]
#frame_index = [10000, 165]
else:
frame_index = [1000000, 1000000]
#MOTION = TAEKWONDO
#frame_index = [135, 100]
if frame > frame_index[0]:
if stage != POWERFUL_BALANCING:
print("#", frame, "-POWERFUL_BALANCING")
stage = POWERFUL_BALANCING
Kk = Kk * 2
Dk = 2 * (Kk**.5)
elif frame > frame_index[1]:
if stage != MOTION_TRACKING:
print("#", frame, "-MOTION_TRACKING")
stage = MOTION_TRACKING
trackingW = w
#if checkAll(contactFlagFootR, 0) != 1 :
if 0: #stage == MOTION_TRACKING:
trackingW = w2
#stage = POWERFUL_BALANCING
Bt = Bt * 2
# optimization
mot.addTrackingTerms(problem, totalDOF, Bt, trackingW, ddth_des_flat)
#mot.addSoftPointConstraintTerms(problem, totalDOF, Bsc, ddP_des1, Q1, q_bias1)
if flagContact == True:
if stage != MOTION_TRACKING + 10:
mot.addLinearTerms(problem, totalDOF, Bl, dL_des_plane, R,
r_bias)
#mot.addAngularTerms(problem, totalDOF, Bh, dH_des, S, s_bias)
# using || dH ||^2 instead
mot.addAnotherTerms(problem, totalDOF, Bh, S,
-(s_bias + Kh * np.dot(S, dth_flat)))
a_sup_2 = None
Jsup_2 = None
dJsup_2 = None
##############################
# Hard constraint
Kk2 = Kk * 4.0
Dk2 = 2 * (Kk2**.5)
ankleW = 0
ankleOffset = ankleW * curRelCMVec[2]
metatarW = 0
metatarOffset = metatarW * curRelCMVec[2]
##############################
##############################
# Additional constraint
if stage != MOTION_TRACKING and frame > 5:
# ankle strategy
idx = 0 #LEFT/RIGHT_TOES
if mit.FOOT_PART_NUM == 1:
yOffset = 0.03
else:
yOffset = 0.069
#yOffset = 0.06
# ankleOffset = (footCenter - CM_plane)*4.
ankleOffset = footCenterOffset * 10.
ankleOffset[1] = 0.
#ankleOffset[2] = 0.
ankleOffset[2] = ankleOffset[2] * 20.
ankleOffsetL = ankleOffset.copy()
ankleOffsetR = ankleOffset.copy()
#ankleOffset= np.array((0,0,0))
if footCenterOffset[0] > 0.0:
ankleOffsetL[0] = 0.
else:
ankleOffsetR[0] = 0.
# print 'ankleOffset=', ankleOffset
desLinearAccL, desPosL = getDesFootLinearAcc(
motionModel, controlModel, indexFootL[idx], ModelOffset,
CM_ref, CM, Kk, Dk, yOffset) #0.076) #0.14)
desLinearAccR, desPosR = getDesFootLinearAcc(
motionModel, controlModel, indexFootR[idx], ModelOffset,
CM_ref, CM, Kk, Dk, yOffset)
ax = [0, 0, -1]
aaa = getBodyGlobalOri(controlModel, motion, 'RightFoot')
#print np.dot(aaa, ax)
if mit.FOOT_PART_NUM == 1:
ax = [0, 1, 0]
desAngularAccL = getDesFootAngularAcc(
motionModel, controlModel, indexFootL[idx], Kk, Dk, ax,
mm.normalize([0, 1, 0] + ankleOffsetL))
desAngularAccR = getDesFootAngularAcc(
motionModel, controlModel, indexFootR[idx], Kk, Dk, ax,
mm.normalize([0, 1, 0] + ankleOffsetR))
a_sup_2 = np.hstack((np.hstack((desLinearAccL, desAngularAccL)),
np.hstack((desLinearAccR, desAngularAccR))))
Jsup_2 = np.vstack((jFootL[idx], jFootR[idx]))
dJsup_2 = np.vstack((dJFootL[idx], dJFootR[idx]))
#mot.addConstraint(problem, totalDOF, Jsup_2, dJsup_2, dth_flat, a_sup_2)
#mot.addConstraint(problem, totalDOF, Jsup_2[:1], dJsup_2[:1], dth_flat, a_sup_2[:1])
#mot.addConstraint(problem, totalDOF, Jsup_2[2:], dJsup_2[2:], dth_flat, a_sup_2[2:])
#mot.addConstraint(problem, totalDOF, Jsup_2[3:], dJsup_2[3:], dth_flat, a_sup_2[3:])
mot.addAnotherTerms(problem, totalDOF,
viewer.objectInfoWnd.Bc.value(), Jsup_2[3:],
a_sup_2[3:] - np.dot(dJsup_2[3:], dth_flat))
#mot.addAnotherTerms(problem, totalDOF, viewer.objectInfoWnd.Bc.value(), Jsup_2, a_sup_2 - np.dot(dJsup_2, dth_flat))
#mot.addAnotherTerms(problem, totalDOF, 1.*viewer.objectInfoWnd.Bc.value(), Jsup_2[0:1], a_sup_2[0:1] - np.dot(dJsup_2[0:1] , dth_flat))
#mot.addAnotherTerms(problem, totalDOF, 1.*viewer.objectInfoWnd.Bc.value(), Jsup_2[2:], a_sup_2[2:] - np.dot(dJsup_2[2:] , dth_flat))
desCOMOffset = 0.0
rd_DesPosL[0] = desPosL.copy()
rd_DesPosR[0] = desPosR.copy()
if stage == STATIC_BALANCING and frame > 10: # and False:
del rd_desPoints[:]
# foot strategy
#Kk2 = Kk * 2.5
#Kk2 = Kk * .2
#Dk2 = 2*(Kk2**.5)
desForePosL = [0, 0, 0]
desForePosR = [0, 0, 0]
desRearPosL = [0, 0, 0]
desRearPosR = [0, 0, 0]
footPartPos = []
footPartPos.append(
controlModel.getBodyPositionGlobal(
motion[0].skeleton.getJointIndex('LeftCalcaneus_1')))
footPartPos.append(
controlModel.getBodyPositionGlobal(
motion[0].skeleton.getJointIndex('LeftPhalange_1')))
footPartPos.append(
controlModel.getBodyPositionGlobal(
motion[0].skeleton.getJointIndex('RightCalcaneus_1')))
footPartPos.append(
controlModel.getBodyPositionGlobal(
motion[0].skeleton.getJointIndex('RightPhalange_1')))
for i in range(1, footPartNum):
contactFlagFootL[i] = 1
contactFlagFootR[i] = 1
SupPts = np.vstack(
(np.array((footPartPos[0][0], footPartPos[1][0],
footPartPos[2][0], footPartPos[3][0])),
np.array(
(footPartPos[0][2], footPartPos[1][2], footPartPos[2][2],
footPartPos[3][2])), np.array((1., 1., 1., 1.))))
coordWidthLen = 2.
coordLengthLen = 1.5
SupUV = np.vstack(
(np.array((-coordWidthLen, -coordWidthLen, coordWidthLen,
coordWidthLen)),
np.array((-coordLengthLen, coordLengthLen, -coordLengthLen,
coordLengthLen)), np.array((1., 1., 1., 1.))))
SupMap = np.dot(np.dot(SupUV, SupUV.T),
np.linalg.inv(np.dot(SupPts, SupUV.T)))
#print SupMap
desFootCenter = footCenter + footCenterOffset
footCenterPts = np.array((desFootCenter[0], desFootCenter[2], 1))
#print np.dot(SupMap, footCenterPts)
#print np.dot(getBodyGlobalOri(controlModel, motion, 'LeftMetatarsal_1'), np.array((0,1,0)))
CM_plane_2D = np.array((CM[0], CM[2], 1))
# CM_plane_UV = np.dot(SupMap, CM_plane_2D)
CM_plane_UV = np.dot(SupMap, footCenterPts)
# print CM_plane_UV
# for i in range(1, footPartNum):
if CM_plane_UV[1] > .5:
# com is in front
for i in range(1, 5):
contactFlagFootL[i] = 0
contactFlagFootR[i] = 0
elif CM_plane_UV[1] < -.5:
# com is back
for i in range(3, footPartNum):
contactFlagFootL[i] = 0
contactFlagFootR[i] = 0
else:
# com is in middle position
for i in range(3, 5):
contactFlagFootL[i] = 0
contactFlagFootR[i] = 0
contactFlagFoot = contactFlagFootL
if CM_plane_UV[0] < 0.:
contactFlagFoot = contactFlagFootR
# CM_plane_UV[0] = -CM_plane_UV[0]
if abs(CM_plane_UV[0]) > 1.:
for j in range(0, 3):
contactFlagFoot[2 * j + 2] = 0
# print 'footL : ',contactFlagFootL
# print 'footR : ',contactFlagFootR
for i in range(1, footPartNum):
axis = [0, 0, 1]
if i == 1 or i == 2:
axis = [0, 0, -1]
desAng = [0, 0, 1]
if i == 1 or i == 2:
desAng = [0, 0, -1]
desY = 0.029
if contactFlagFootL[i] == 1:
desLinearAccL, desForePosL = getDesFootLinearAcc(
motionModel, controlModel, indexFootL[i], ModelOffset,
CM_ref, CM, Kk2, Dk2, desY)
desAngularAccL = getDesFootAngularAcc(
motionModel, controlModel, indexFootL[i], Kk2, Dk2,
axis, desAng)
a_sup_2 = np.hstack((desLinearAccL, desAngularAccL))
Jsup_2 = jFootL[i].copy()
dJsup_2 = dJFootL[i].copy()
mot.addConstraint(problem, totalDOF, Jsup_2, dJsup_2,
dth_flat, a_sup_2)
#mot.addAnotherTerms(problem, totalDOF, viewer.objectInfoWnd.Bc.value(), Jsup_2, a_sup_2 - np.dot(dJsup_2, dth_flat))
#mot.addAnotherTerms(problem, totalDOF, viewer.objectInfoWnd.Bc.value(), Jsup_2[3:], a_sup_2[3:] - np.dot(dJsup_2[3:] , dth_flat))
rd_desPoints.append(desForePosL.copy())
if contactFlagFootR[i] == 1:
desLinearAccR, desForePosR = getDesFootLinearAcc(
motionModel, controlModel, indexFootR[i], ModelOffset,
CM_ref, CM, Kk2, Dk2, desY)
desAngularAccR = getDesFootAngularAcc(
motionModel, controlModel, indexFootR[i], Kk2, Dk2,
axis, desAng)
a_sup_2 = np.hstack((desLinearAccR, desAngularAccR))
Jsup_2 = jFootR[i].copy()
dJsup_2 = dJFootR[i].copy()
mot.addConstraint(problem, totalDOF, Jsup_2, dJsup_2,
dth_flat, a_sup_2)
#mot.addAnotherTerms(problem, totalDOF, viewer.objectInfoWnd.Bc.value(), Jsup_2, a_sup_2 - np.dot(dJsup_2, dth_flat))
#mot.addAnotherTerms(problem, totalDOF, viewer.objectInfoWnd.Bc.value(), Jsup_2[3:], a_sup_2[3:] - np.dot(dJsup_2[3:], dth_flat))
rd_desPoints.append(desForePosR.copy())
rd_DesForePosL[0] = desForePosL
rd_DesForePosR[0] = desForePosR
rd_DesRearPosL[0] = desRearPosL
rd_DesRearPosR[0] = desRearPosR
##############################
#if Jsup_2 != None:
# mot.addConstraint(problem, totalDOF, Jsup_2, dJsup_2, dth_flat, a_sup_2)
timeReport[4] += time.time() - curTime
curTime = time.time()
#print np.NAN
r = problem.solve()
#print frame
#Ashape = np.shape(problem.A)
#if len(Ashape) >0 :
# for i in range(0, Ashape[0]):
# print problem.A[i]
#print problem.A[]
#print problem.b
#print r
problem.clear()
#print r['x']
ype.nested(r['x'], ddth_sol)
#print ddth_sol
rootPos[0] = controlModel.getBodyPositionGlobal(selectedBody)
localPos = [[0, 0, 0]]
###########################################
##Jacobian Transpose control
# COM Position control
#fCom = Wcp*(pHatComDes - pHatCom) + Wcv*(vComDes - vCom) + Wcm*(footCenter_plane - CM_plane)
w1 = 10 #10.1
w2 = 1 #1#2*(w1**.5)
if frame > 100:
w1 = 10.1 #10.1
w2 = 1
footToCMVec = CM - footCenter
desCMPos = [footCenter[0], mm.length(footToCMVec), footCenter[2]]
#print("desCMPos", desCMPos)
#print("CM", CM)
fCom = w1 * (desCMPos - CM) + w2 * (-dCM)
#print("fCom", fCom)
#fCom[0] = 0.
#fCom[1] = 0
#fCom[2] = 0
rd_virtualForce[0] = fCom.copy()
#hipPos = controlModel.getBodyPositionGlobal(rootB)
headPos = controlModel.getBodyPositionGlobal(selectedBody)
hipPos = controlModel.getBodyPositionGlobal(rootB)
yjc.computeJacobian2(Jcom, DOFs, jointPositions, jointAxeses,
[headPos], comUpperJointMasks)
#yjc.computeJacobianDerivative2(dJcom, DOFs, jointPositions, jointAxeses, linkAngVelocities, [CM], comUpperJointMasks, False)
JcomT = Jcom.T
TauJT = np.dot(JcomT, fCom)
# Angular Momentum
Hc = ymt.getAngularMomentum(CM, linkInertias, linkAngVelocities,
linkPositions, linkMasses, linkVelocities)
Href = ymt.getAngularMomentum(CM_ref, linkInertias_ref,
linkAngVelocities_ref, linkPositions_ref,
linkMasses, linkVelocities_ref)
Wam = .05
Tam = Wam * (Href - Hc)
#print("Tam", Tam)
yjc.computeAngJacobian2(JcomAng, DOFs, jointPositions, jointAxeses,
[headPos], comUpperJointMasks)
TauAM = np.dot(JcomAng.T, Tam)
timeReport[5] += time.time() - curTime
curTime = time.time()
for i in range(stepsPerFrame):
# apply penalty force
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(
bodyIDsToCheck, mus, Ks, Ds)
#print frame, bodyIDs, contactPositions, contactPositionLocals, contactForces
vpWorld.applyPenaltyForce(bodyIDs, contactPositionLocals,
contactForces)
extraForce[0] = viewer.GetForce()
if (extraForce[0][0] != 0 or extraForce[0][1] != 0
or extraForce[0][2] != 0):
forceApplyFrame += 1
#vpWorld.applyPenaltyForce(selectedBodyId, localPos, extraForce)
controlModel.applyBodyForceGlobal(selectedBody, extraForce[0])
applyedExtraForce[0] = extraForce[0]
if forceApplyFrame * wcfg.timeStep > 0.1:
viewer.ResetForce()
forceApplyFrame = 0
#print ddth_sol
controlModel.setDOFAccelerations(ddth_sol)
controlModel.solveHybridDynamics()
'''
if (frame > 5):
tau = controlModel.getJointTorqueLocal(indexFootL[3])
tau2 = controlModel.getJointTorqueLocal(indexFootL[4])
tau3 = controlModel.getJointTorqueLocal(indexFootR[3])
tau4 = controlModel.getJointTorqueLocal(indexFootR[4])
torques = controlModel.getInternalJointTorquesLocal()
if (frame > 100 and frame < 110) or (frame > 165 and frame < 190):
Wcal1 = 0.05
Wcal2 = 0.05
dC = fCom[2]*Wcal1-dCM[2]*Wcal2
print("dC", dC)
torques[indexFootL[5]-1]+= (dC, 0.0, 0.0)
torques[indexFootR[5]-1]+= (dC, 0.0, 0.0)
if (frame > 50 and frame < 75) or (frame > 110 and frame <140) or (frame > 185 and frame < 220):
metatarR = [controlModel.getBodyOrientationGlobal(indexFootL[1])]
phalangeR = [controlModel.getBodyOrientationGlobal(indexFootL[3])]
metatarR2 = np.dot(metatarR, np.array([0,0,1]))
phalangeR2 = np.dot(phalangeR, np.array([0,0,1]))
metatarRZ = mm.normalize(metatarR2[0])
phalangeRZ = mm.normalize(phalangeR2[0])
lean = np.dot(metatarRZ, phalangeRZ)
Wlean = 2
dt = -0.02*(lean)*Wlean
torques[indexFootL[3]-1]+= (dt, 0.0, 0.0)
torques[indexFootL[4]-1]+= (dt, 0.0, 0.0)
torques[indexFootR[3]-1]+= (dt, 0.0, 0.0)
torques[indexFootR[4]-1]+= (dt, 0.0, 0.0)
i = 0
t = 6
while t < len(TauJT) :
torques[i] += (TauJT[t]+TauAM[t], TauJT[t+1]+TauAM[t+1], TauJT[t+2]+TauAM[t+2])
i+=1
t+=3
#totalTorques = [a + b for a, b in zip(torques, TauJT)]
#print("torques2", torques)
#print("TauJT", TauJT[16], TauJT[17], TauJT[18])
#print("torques", torques[16])
#print("totalTorques", totalTorques[16])
controlModel.setInternalJointTorquesLocal(torques)
'''
'''
extraForce[0] = viewer.GetForce()
if (extraForce[0][0] != 0 or extraForce[0][1] != 0 or extraForce[0][2] != 0) :
forceApplyFrame += 1
vpWorld.applyPenaltyForce(selectedBodyId, localPos, extraForce)
applyedExtraForce[0] = extraForce[0]
if forceApplyFrame*wcfg.timeStep > 0.1:
viewer.ResetForce()
forceApplyFrame = 0
'''
vpWorld.step()
if frame % 30 == 0:
print 'elapsed time for 30 frames:', time.time() - pt[0]
# rendering
rd_footCenter[0] = footCenter
rd_CM[0] = CM.copy()
rd_CM_plane[0] = CM_plane.copy()
rd_footCenter_ref[0] = footCenter_ref
rd_CM_plane_ref[0] = CM_ref.copy()
rd_CM_ref[0] = CM_ref.copy()
rd_CM_ref_vec[0] = (CM_ref - footCenter_ref) * 3.
rd_CM_vec[0] = (CM - CM_plane)
rd_CM_des[0] = CM_ref_plane.copy()
rd_CM_des[0][1] = .01
#rd_CM_plane[0][1] = 0.
if CP != None and dCP != None:
rd_CP[0] = CP
rd_CP_des[0] = CP_des
rd_dL_des_plane[0] = dL_des_plane
rd_dH_des[0] = dH_des
rd_grf_des[
0] = totalNormalForce # - totalMass*mm.s2v(wcfg.gravity)#dL_des_plane - totalMass*mm.s2v(wcfg.gravity)
rd_exf_des[0] = applyedExtraForce[0]
rd_root_des[0] = rootPos[0]
rd_CMP[0] = softConstPoint
rd_soft_const_vec[0] = controlModel.getBodyPositionGlobal(
constBody) - softConstPoint
#indexL = motion[0].skeleton.getJointIndex('Hips')
#indexR = motion[0].skeleton.getJointIndex('Spine1')
indexL = indexFootL[0]
indexR = indexFootR[0]
curAng = [controlModel.getBodyOrientationGlobal(indexL)]
curAngY = np.dot(curAng, np.array([0, 0, 1]))
rd_footL_vec[0] = np.copy(curAngY[0])
rd_footCenterL[0] = controlModel.getBodyPositionGlobal(indexL)
curAng = [controlModel.getBodyOrientationGlobal(indexR)]
curAngY = np.dot(curAng, np.array([0, 0, 1]))
rd_footR_vec[0] = np.copy(curAngY[0])
rd_footCenterR[0] = controlModel.getBodyPositionGlobal(indexR)
if (forceApplyFrame == 0):
applyedExtraForce[0] = [0, 0, 0]
timeReport[6] += time.time() - curTime
# print timeReport
viewer.setSimulateCallback(simulateCallback)
viewer.startTimer(1 / 30.)
viewer.show()
Fl.run()
def simulation_test():
Kt = 20.
Dt = 2 * (Kt**.5)
Ks = 2000.
Ds = 2 * (Ks**.5)
mu = 1.
dir = './icmotion_last/'
filename = 'stop_left_normal.temp'
# filename = 'left_left_normal.temp'
# filename = 'right_left_fast.temp'
motion_ori = yf.readBvhFile(dir + filename)
frameTime = 1 / motion_ori.fps
motion_ori[0:0] = [motion_ori[0]] * 20
mcfgfile = open(dir + 'mcfg', 'rb')
mcfg = pickle.load(mcfgfile)
mcfgfile.close()
wcfg = ypc.WorldConfig()
wcfg.planeHeight = 0.
wcfg.useDefaultContactModel = False
# wcfg.lockingVel = c_locking_vel
stepsPerFrame = 30
wcfg.timeStep = (frameTime) / stepsPerFrame
vpWorld = cvw.VpWorld(wcfg)
motionModel = cvm.VpMotionModel(vpWorld, motion_ori[0], mcfg)
controlModel = cvm.VpControlModel(vpWorld, motion_ori[0], mcfg)
vpWorld.initialize()
print(controlModel)
controlModel.initializeHybridDynamics()
bodyIDsToCheck = range(vpWorld.getBodyNum())
mus = [mu] * len(bodyIDsToCheck)
viewer = ysv.SimpleViewer()
# viewer.record(False)
# viewer.doc.addRenderer('motion_ori', yr.JointMotionRenderer(motion_ori, (0,100,255), yr.LINK_BONE))
viewer.doc.addObject('motion_ori', motion_ori)
viewer.doc.addRenderer(
'motionModel',
cvr.VpModelRenderer(motionModel, (0, 150, 255), yr.POLYGON_LINE))
viewer.doc.addRenderer(
'controlModel',
cvr.VpModelRenderer(controlModel, (200, 200, 200), yr.POLYGON_LINE))
def simulateCallback(frame):
th_r = motion_ori.getDOFPositions(frame)
th = controlModel.getDOFPositions()
dth_r = motion_ori.getDOFVelocities(frame)
dth = controlModel.getDOFVelocities()
ddth_r = motion_ori.getDOFAccelerations(frame)
ddth_des = yct.getDesiredDOFAccelerations(th_r, th, dth_r, dth, ddth_r,
Kt, Dt)
for i in range(stepsPerFrame):
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(
bodyIDsToCheck, mus, Ks, Ds)
vpWorld.applyPenaltyForce(bodyIDs, contactPositionLocals,
contactForces)
controlModel.setDOFAccelerations(ddth_des)
controlModel.solveHybridDynamics()
vpWorld.step()
motionModel.update(motion_ori[frame])
viewer.setSimulateCallback(simulateCallback)
viewer.startTimer(frameTime / 1.4)
viewer.show()
Fl.run()
def preprocess(SEGMENT_FOOT=False):
tasks = []
outputDir = './ppmotion/'
dir = '../Data/woody2/Motion/Physics2/'
config = None
if SEGMENT_FOOT:
# segmented foot
config = {
'repeat': True,
'footRot': mm.rotX(.07),
'yOffset': 0.,
'halfFootHeight': 0.0944444444444,
'scale': .01,
'type': 'woody2'
}
else:
# box foot
config = {
'repeat': True,
'footRot': mm.rotX(-.4),
'yOffset': 0.,
'halfFootHeight': 0.0444444444444,
'scale': .01,
'type': 'woody2'
}
paths = []
paths.append(dir + 'wd2_WalkSameSame01.bvh')
paths.append(dir + 'wd2_WalkForwardSlow01.bvh')
paths.append(dir + 'wd2_WalkForwardNormal00.bvh')
paths.append(dir + 'wd2_WalkHandWav00.bvh')
paths.append(dir + 'wd2_WalkForwardFast00.bvh')
paths.append(dir + 'wd2_WalkForwardVFast00.bvh')
paths.append(dir + 'wd2_WalkLean00.bvh')
paths.append(dir + 'wd2_WalkAzuma01.bvh')
paths.append(dir + 'wd2_WalkSoldier00.bvh')
paths.append(dir + 'wd2_WalkSukiko00.bvh')
# paths.append(dir+'wd2_WalkBackward00.bvh')
paths.append(dir + 'wd2_WalkTongTong00.bvh')
tasks.append({'config': config, 'paths': paths})
##
# dir = '../Data/woody2/Motion/Balancing/'
# config = {'footRot': mm.exp(mm.v3(1,-.5,0), -.6), 'yOffset': .0, 'halfFootHeight': 0.0444444444444, 'scale':.01, 'type':'woody2'}
# paths = []
# paths.append(dir+'wd2_2foot_walk_turn.bvh')
# paths.append(dir+'wd2_2foot_walk_turn2.bvh')
# paths.append(dir+'wd2_slow_2foot_hop.bvh')
# paths.append(dir+'wd2_short_broad_jump.bvh')
# paths.append(dir+'wd2_long_broad_jump.bvh')
# paths.append(dir+'wd2_ffast_cancan_run.bvh')
# paths.append(dir+'wd2_fast_cancan_run.bvh')
# paths.append(dir+'wd2_fast_2foot_hop.bvh')
# paths.append(dir+'wd2_1foot_contact_run.bvh')
# paths.append(dir+'wd2_1foot_contact_run2.bvh')
## tasks.append({'config':config, 'paths':paths})
#
## dir = '../Data/woody2/Motion/Samsung/'
## config = {'footRot': mm.rotX(-.46), 'yOffset': .0, 'halfFootHeight': 0.0444444444444, 'scale':.01*2.54, 'type':'woody2amc'}
## paths = []
## paths.append(dir+'wd2_left_turn.bvh')
## paths.append(dir+'wd2_right_turn.bvh')
## paths.append(dir+'wd2_pose_inner1.bvh')
## paths.append(dir+'wd2_pose_inner2.bvh')
## tasks.append({'config':config, 'paths':paths})
#
# dir = '../Data/woody2/Motion/Picking/'
# config = {'footRot': mm.rotX(-.5), 'yOffset': .0, 'halfFootHeight': 0.0444444444444, 'scale':.01, 'type':'woody2'}
# paths = []
# paths.append(dir+'wd2_pick_walk_1.bvh')
## tasks.append({'config':config, 'paths':paths})
#
# dir = '../Data/woody2/Motion/VideoMotion/'
# config = {'footRot': mm.rotX(-.48), 'yOffset': .0, 'halfFootHeight': 0.0444444444444, 'scale':.01*2.54, 'type':'woody2amc'}
## paths = glob.glob(dir+'*.bvh')
# paths = []
# paths.append(dir+'wd2_cross_walk_90d_fast_27.bvh')
## tasks.append({'config':config, 'paths':paths})
#
# dir = '../Data/woody2/Motion/Walking/'
# config = {'footRot': mm.rotX(-.40), 'yOffset': .0, 'halfFootHeight': 0.0444444444444, 'scale':.01*2.54, 'type':'woody2amc'}
# paths = glob.glob(dir+'*.bvh')
## tasks.append({'config':config, 'paths':paths})
#
## dir = '../Data/woody2/Motion/samsung_boxing/round/'
## config = {'footRot': mm.rotX(-.65), 'yOffset': .0, 'halfFootHeight': 0.0444444444444, 'scale':.01*2.54, 'type':'woody2amc'}
## paths = glob.glob(dir+'*.bvh')
## tasks.append({'config':config, 'paths':paths})
#
## dir = '../Data/woody2/Motion/samsung_boxing/boxman/'
## config = {'footRot': mm.rotX(-.5), 'yOffset': .0, 'halfFootHeight': 0.0444444444444, 'scale':.01*2.54, 'type':'woody2amc'}
## paths = glob.glob(dir+'*.bvh')
## tasks.append({'config':config, 'paths':paths})
#
# dir = '../Data/woody2/Motion/motion_edit/'
# config = {'footRot': mm.rotX(-.5), 'yOffset': .0, 'halfFootHeight': 0.0444444444444, 'scale':.01*2.54, 'type':'woody2amc'}
# paths = glob.glob(dir+'*.bvh')
## tasks.append({'config':config, 'paths':paths})
#
## outputDir = './icmotion_test/'
## dir = './rawmotion/'
## config = {'footRot': mm.rotX(-.5), 'yOffset': .0, 'halfFootHeight': 0.0444444444444, 'scale':1., 'type':'woody2_new'}
## paths = glob.glob(dir+'*.temp')
## tasks.append({'config':config, 'paths':paths})
#
# outputDir = './icmotion_last/'
# dir = './lastmotion/add/'
## config = {'rootRot':mm.rotZ(.05), 'footRot': mm.rotX(-.5), 'leftFootR':mm.rotZ(-.1), \
# config = {'rootRot':mm.rotZ(.0), 'footRot': np.dot(mm.rotX(-.5), mm.rotZ(.04)), 'leftFootR':mm.rotZ(-.2), \
# 'halfFootHeight': 0.0444444444444, 'scale':1., 'type':'woody2_new'}
# paths = glob.glob(dir+'*.temp')
# tasks.append({'config':config, 'paths':paths})
# outputDir = './ppmotion_slope/'
# dir = './rawmotion_slope_extracted/'
# config = {'rootRot':mm.rotZ(.0), 'footRot': np.dot(mm.rotX(-.55), mm.rotZ(.04)), 'leftFootR':mm.rotZ(-.2), \
# 'halfFootHeight': 0.0444444444444, 'scale':1., 'type':'woody2_new'}
# paths = glob.glob(dir+'*.bvh')
# tasks.append({'config':config, 'paths':paths})
VISUALIZE = False
for task in tasks:
config = task['config']
paths = task['paths']
for path in paths:
motion = yf.readBvhFile(path)
normalizeSkeleton(motion, config)
adjustHeight(motion, config['halfFootHeight'])
additionalEdit(motion, path)
outputPath = outputDir + os.path.basename(path)
if SEGMENT_FOOT:
outputPath = outputDir + "segfoot_" + os.path.basename(path)
yf.writeBvhFile(outputPath, motion)
print(outputPath, 'done')
if 'repeat' in config and config['repeat']:
hRef = .1
vRef = .3
lc = yma.getElementContactStates(motion, 'LeftFoot', hRef,
vRef)
interval = yba.getWalkingCycle2(motion, lc)
transitionLength = 20 if 'wd2_WalkAzuma01.bvh' in path else 10
motion = ymt.repeatCycle(motion, interval, 50,
transitionLength)
outputName = os.path.splitext(
os.path.basename(path))[0] + '_REPEATED.bvh'
outputPath = outputDir + outputName
if SEGMENT_FOOT:
outputPath = outputDir + 'segfoot_' + outputName
yf.writeBvhFile(outputPath, motion)
print(outputPath, 'done')
if VISUALIZE:
viewer = ysv.SimpleViewer()
viewer.record(False)
viewer.doc.addRenderer(
'motion',
yr.JointMotionRenderer(motion, (0, 100, 255),
yr.LINK_LINE))
viewer.doc.addObject('motion', motion)
viewer.startTimer(1 / 30.)
viewer.show()
Fl.run()
print('FINISHED')
def preprocess(SEGMENT_FOOT=False):
tasks = []
outputDir = './ppmotion/'
if SEGMENT_FOOT:
outputDir = './ppmotion_segfoot/'
dir = './ori_motion/'
config = None
if SEGMENT_FOOT:
# segmented foot
# config = {'repeat':False, 'footRot': mm.rotX(.07), 'yOffset':0., 'halfFootHeight': 0.0944444444444, 'scale':.01, 'type':'woody2'}
config = {
'repeat': False,
'footRot': mm.rotX(-.07),
'yOffset': 0.,
'halfFootHeight': 0.0944444444444,
'scale': .01,
'type': 'woody2'
}
else:
# box foot
config = {
'repeat': False,
'footRot': mm.rotX(-.4),
'yOffset': 0.,
'halfFootHeight': 0.0444444444444,
'scale': .01,
'type': 'woody2'
}
paths = []
# rotX = -0.07
paths.append(dir + 'wd2_1foot_contact_run2_edit.bvh')
paths.append(dir + 'wd2_fast_2foot_hop_edit.bvh')
paths.append(dir + 'wd2_long_broad_jump_edit.bvh')
paths.append(dir + 'wd2_n_kick_edit.bvh')
paths.append(dir + 'wd2_short_broad_jump_edit.bvh')
paths.append(dir + 'wd2_slow_2foot_hop_edit.bvh')
# rotX = 0.07
# paths.append(dir+'wd2_boxing_round_round_girl1_edit.bvh')
# paths.append(dir+'wd2_u-turn_edit.bvh')
tasks.append({'config': config, 'paths': paths})
VISUALIZE = False
for task in tasks:
config = task['config']
paths = task['paths']
for path in paths:
motion = yf.readBvhFile(path)
normalizeSkeleton(motion, config)
adjustHeight(motion, config['halfFootHeight'])
additionalEdit(motion, path)
outputPath = outputDir + os.path.basename(path)
if SEGMENT_FOOT:
outputPath = outputDir + "segfoot_" + os.path.basename(path)
yf.writeBvhFile(outputPath, motion)
print(outputPath, 'done')
if 'repeat' in config and config['repeat']:
hRef = .1
vRef = .3
lc = yma.getElementContactStates(motion, 'LeftFoot', hRef,
vRef)
interval = yba.getWalkingCycle2(motion, lc)
transitionLength = 20 if 'wd2_WalkAzuma01.bvh' in path else 10
motion = ymt.repeatCycle(motion, interval, 50,
transitionLength)
outputName = os.path.splitext(
os.path.basename(path))[0] + '_REPEATED.bvh'
outputPath = outputDir + outputName
if SEGMENT_FOOT:
outputPath = outputDir + 'segfoot_' + outputName
yf.writeBvhFile(outputPath, motion)
print(outputPath, 'done')
if VISUALIZE:
viewer = ysv.SimpleViewer()
viewer.record(False)
viewer.doc.addRenderer(
'motion',
yr.JointMotionRenderer(motion, (0, 100, 255),
yr.LINK_LINE))
viewer.doc.addObject('motion', motion)
viewer.startTimer(1 / 30.)
viewer.show()
Fl.run()
print('FINISHED')