def main():
"""Main function"""
chiller_port = '/dev/serial/by-id/'
chiller_port += 'usb-1a86_USB2.0-Ser_-if00-port0'
LOG.info('Using chiller port %s', chiller_port)
reader = ChillerReader(chiller_port)
reader.start()
LOG.info('ChillerReader started')
codenames = [
'uhv_sputterchamber_chiller_temperature',
'uhv_sputterchamber_chiller_flow',
'uhv_sputterchamber_chiller_temperature_ambient',
'uhv_sputterchamber_chiller_pressure',
'uhv_sputterchamber_chiller_temperature_setpoint'
]
LOG.debug('Using codenames %s', codenames)
loggers = {}
for i in range(0, len(codenames)):
loggers[codenames[i]] = ValueLogger(reader, comp_val=0.11, channel=i)
loggers[codenames[i]].start()
live_socket_name = 'uhv_sputterchamber'
live_socket = LiveSocket(live_socket_name, codenames)
live_socket.start()
LOG.info('Live socket init and started with name "%s"', live_socket_name)
db_table = 'dateplots_uhv_sputterchamber'
db_logger = ContinuousDataSaver(continuous_data_table=db_table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
LOG.info('ContinuousLogger init and started on table "%s"', db_table)
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
if not math.isnan(value):
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
LOG.debug('Log value %s for codename "%s"', value, name)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
"""Main function"""
chiller_port = '/dev/serial/by-id/'
chiller_port += 'usb-1a86_USB2.0-Ser_-if00-port0'
LOG.info('Using chiller port %s', chiller_port)
reader = ChillerReader(chiller_port)
reader.start()
LOG.info('ChillerReader started')
codenames = ['uhv_sputterchamber_chiller_temperature',
'uhv_sputterchamber_chiller_flow',
'uhv_sputterchamber_chiller_temperature_ambient',
'uhv_sputterchamber_chiller_pressure',
'uhv_sputterchamber_chiller_temperature_setpoint']
LOG.debug('Using codenames %s', codenames)
loggers = {}
for i in range(0, len(codenames)):
loggers[codenames[i]] = ValueLogger(reader, comp_val=0.11, channel=i)
loggers[codenames[i]].start()
live_socket_name = 'uhv_sputterchamber'
live_socket = LiveSocket(live_socket_name, codenames)
live_socket.start()
LOG.info('Live socket init and started with name "%s"', live_socket_name)
db_table = 'dateplots_uhv_sputterchamber'
db_logger = ContinuousDataSaver(continuous_data_table=db_table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
LOG.info('ContinuousLogger init and started on table "%s"', db_table)
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
if not math.isnan(value):
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
LOG.debug('Log value %s for codename "%s"', value, name)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
"""Main function"""
chiller_port = '/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0'
LOG.info('Using chiller port %s', chiller_port)
new_chiller_port = '/dev/serial/by-id/'
new_chiller_port += 'usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0'
LOG.info('Using chiller port %s', new_chiller_port)
#Names without new-prefix refers to the old xrd, names including new
#refers to the new xrd
reader = ChillerReader(chiller_port)
reader.start()
LOG.info('ChillerReader started')
new_reader = ChillerReader(new_chiller_port)
new_reader.start()
LOG.info('NewChillerReader started')
codenames = [
'xrd_chiller_temperature', 'xrd_chiller_flow',
'xrd_chiller_temperature_ambient', 'xrd_chiller_pressure',
'xrd_chiller_temperature_setpoint'
]
new_codenames = [
'new_xrd_chiller_temperature', 'new_xrd_chiller_flow',
'new_xrd_chiller_temperature_ambient', 'new_xrd_chiller_pressure',
'new_xrd_chiller_temperature_setpoint'
]
LOG.debug('Using codenames %s', codenames)
LOG.debug('Using codenames %s', new_codenames)
loggers = {}
for i in range(0, len(codenames)):
loggers[codenames[i]] = ValueLogger(reader, comp_val=0.1, channel=i)
loggers[codenames[i]].start()
for i in range(0, len(new_codenames)):
loggers[new_codenames[i]] = ValueLogger(new_reader,
comp_val=0.1,
channel=i)
loggers[new_codenames[i]].start()
live_socket_name = 'XRD chiller'
live_socket = LiveSocket(live_socket_name, codenames + new_codenames)
live_socket.start()
LOG.info('Live socket init and started with name "%s"', live_socket_name)
db_table = 'dateplots_xrd'
db_logger = ContinuousDataSaver(continuous_data_table=db_table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
LOG.info('ContinuousLogger init and started on table "%s"', db_table)
new_db_table = 'dateplots_new_xrd'
new_db_logger = ContinuousDataSaver(continuous_data_table=new_db_table,
username=credentials.new_user,
password=credentials.new_passwd,
measurement_codenames=new_codenames)
new_db_logger.start()
LOG.info('ContinuousLogger init and started on table "%s"', new_db_table)
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
if not math.isnan(value):
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
LOG.debug('Log value %s for codename "%s"', value, name)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
for name in new_codenames:
value = loggers[name].read_value()
if not math.isnan(value):
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
LOG.debug('Log value %s for codename "%s"', value, name)
new_db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
"""Main function"""
chiller_port = '/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0'
LOG.info('Using chiller port %s', chiller_port)
new_chiller_port = '/dev/serial/by-id/'
new_chiller_port += 'usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0'
LOG.info('Using chiller port %s', new_chiller_port)
#Names without new-prefix refers to the old xrd, names including new
#refers to the new xrd
reader = ChillerReader(chiller_port)
reader.start()
LOG.info('ChillerReader started')
new_reader = ChillerReader(new_chiller_port)
new_reader.start()
LOG.info('NewChillerReader started')
codenames = ['xrd_chiller_temperature',
'xrd_chiller_flow',
'xrd_chiller_temperature_ambient',
'xrd_chiller_pressure',
'xrd_chiller_temperature_setpoint']
new_codenames = ['new_xrd_chiller_temperature',
'new_xrd_chiller_flow',
'new_xrd_chiller_temperature_ambient',
'new_xrd_chiller_pressure',
'new_xrd_chiller_temperature_setpoint']
LOG.debug('Using codenames %s', codenames)
LOG.debug('Using codenames %s', new_codenames)
loggers = {}
for i in range(0, len(codenames)):
loggers[codenames[i]] = ValueLogger(reader, comp_val=0.1, channel=i)
loggers[codenames[i]].start()
for i in range(0, len(new_codenames)):
loggers[new_codenames[i]] = ValueLogger(new_reader, comp_val=0.1, channel=i)
loggers[new_codenames[i]].start()
live_socket_name = 'XRD chiller'
live_socket = LiveSocket(live_socket_name, codenames)
live_socket.start()
LOG.info('Live socket init and started with name "%s"', live_socket_name)
db_table = 'dateplots_xrd'
db_logger = ContinuousDataSaver(continuous_data_table=db_table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
LOG.info('ContinuousLogger init and started on table "%s"', db_table)
new_db_table = 'dateplots_new_xrd'
new_db_logger = ContinuousDataSaver(continuous_data_table=new_db_table,
username=credentials.new_user,
password=credentials.new_passwd,
measurement_codenames=new_codenames)
new_db_logger.start()
LOG.info('ContinuousLogger init and started on table "%s"', new_db_table)
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
if not math.isnan(value):
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
LOG.debug('Log value %s for codename "%s"', value, name)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
for name in new_codenames:
value = loggers[name].read_value()
if not math.isnan(value):
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
LOG.debug('Log value %s for codename "%s"', value, name)
new_db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
