def __init__(self, factory):
QWidget.__init__(self)
self.factory = factory
self.damping = QLineEdit(
str(
self.factory.getHillClimberAcceptOption(
"simulated-annealing.damping")))
self.damping.setAlignment(Qt.AlignRight)
self.damping.setValidator(QDoubleValidator(0.0, 1.0, 4))
self.temp = QLineEdit(
str(
self.factory.getHillClimberAcceptOption(
"simulated-annealing.temp")))
self.temp.setAlignment(Qt.AlignRight)
self.temp.setValidator(QDoubleValidator(0.0, 100000000.0, 4))
layout = QVBoxLayout()
layout.addWidget(QLabel("Damping:"))
layout.addWidget(self.damping)
layout.addWidget(QLabel("Temperature:"))
layout.addWidget(self.temp)
self.setLayout(layout)
self.damping.textChanged.connect(self.setDamping)
self.temp.textChanged.connect(self.setTemp)
def setup_buttons(self):
# self.le_P.setValidator(QDoubleValidator())
# self.le_D.setValidator(QDoubleValidator())
# self.le_I.setValidator(QDoubleValidator())
self.le_min.setValidator(QDoubleValidator())
self.le_max.setValidator(QDoubleValidator())
self.le_nbOfPoints.setValidator(QIntValidator())
self.le_P.setMaxLength(5)
self.le_I.setMaxLength(5)
self.le_D.setMaxLength(5)
def _set_validators(self):
"""
This methods sets validation rules for the input fields. It should be called only once when the
PreferencesDialog is instantiated.
:return: Has no return values.
"""
self.ui.contentWeightInput.setValidator(QDoubleValidator(self))
self.ui.styleWeightInput.setValidator(QDoubleValidator(self))
self.ui.tvWeightInput.setValidator(QDoubleValidator(self))
self.ui.temporalWeightInput.setValidator(QDoubleValidator(self))
self.ui.learningRateInput.setValidator(QDoubleValidator(self))
self.ui.iterationsInput.setValidator(QIntValidator(0, 5000, self))
def __init__(self, parent=None):
"""Constructor."""
super(CoordinatorDockWidget, self).__init__(parent)
# Set up the user interface from Designer.
# After setupUI you can access any designer object by doing
# self.<objectname>, and you can use autoconnect slots - see
# http://qt-project.org/doc/qt-4.8/designer-using-a-ui-file.html
# #widgets-and-dialogs-with-auto-connect
self.decDegreeValidator = QDoubleValidator(0.0, 180.0, 8, parent=self)
self.decDegreeValidator.setNotation(QDoubleValidator.StandardNotation)
self.projectedValidator = QDoubleValidator(-999999999.0,
999999999.0,
4,
parent=self)
self._eastingLeftNorthingRight = True
self._eastingInverted = False
self._northingInverted = False
self.sectionIsGeographic = {
CoordinatorDockWidget.SectionInput: True,
CoordinatorDockWidget.SectionOutput: True
}
self.setupUi(self)
# setup some lists of the input for easier access later
self._widgetlistInputDms = [
self.inLeft, self.inRight, self.inLeftSec, self.inRightSec,
self.inLeftMin, self.inRightMin
]
self._widgetlistInput = self._widgetlistInputDms + [
self.inLeftDec, self.inRightDec
]
self.resetInterface()
self.setupInternal()
# need to init that after setupUi because of message icon label size
messageIconWidgetSize = self.messageIcon.size()
messageIconSize = QSize(messageIconWidgetSize.width() - 2,
messageIconWidgetSize.height() - 2)
self.warningPixmap = QIcon(
':/plugins/coordinator/icons/warning.svg').pixmap(messageIconSize)
self.messageHideTimer = QTimer(parent=self)
self.messageHideTimer.setSingleShot(True)
self.messageHideTimer.timeout.connect(self.hideMessages)
def __init__(self):
QDialog.__init__(self)
self.setupUi(self)
self.validator = QDoubleValidator()
self.txtRestricciones.setClearButtonEnabled(True)
self.txtVariables.setClearButtonEnabled(True)
self.txtRestricciones.setValidator(QIntValidator())
self.txtVariables.setValidator(QIntValidator())
self.scrollContent.setLayout(self.gridData)
self.scrollAreaWidgetContents.setLayout(self.func_object)
self.btnClose.clicked.connect(self.close)
self.txtRestricciones.textChanged['QString'].connect(
self.generateInputs)
self.txtVariables.textChanged['QString'].connect(self.generateInputs)
self.label_3.setVisible(False)
self.label_4.setVisible(False)
self.btnSolve.clicked.connect(self.solve)
self.btnLimpiar.clicked.connect(lambda: self.clearLayout(True))
def __init__(self):
super(MyWindow, self).__init__()
self.resize(347, 347)
self.setFixedSize(self.width(), self.height())
self.setWindowTitle(u'KR1 Steam版 V2.2 跳波修改器')
self.showMSG = QLabel(self)
self.showMSG.setGeometry(QRect(30, 10, 300, 15))
self.showChange = QLabel(self)
self.showChange.setGeometry(QRect(200, 10, 147, 15))
self.moneyGroup = QGroupBox(self)
self.moneyGroup.setGeometry(QRect(23, 40, 300, 80))
self.moneyGroup.setTitle(u'修改金钱 ')
self.moneyLineEdit = QLineEdit(self)
self.moneyLineEdit.setValidator(QIntValidator())
self.moneyLineEdit.setGeometry(QRect(40, 65, 180, 35))
self.moneyLineEdit.setText('10000')
self.moneyLineEdit.setStyleSheet('color:#4F4F4F;')
self.moneyLineEdit.setFont(QFont('Arial', 15))
self.moneyButton = QPushButton(self)
self.moneyButton.setGeometry(QRect(238, 64, 65, 37))
self.moneyButton.setText(u'修改')
self.moneyButton.clicked.connect(self.moneyModify)
self.enemyHealthGroup = QGroupBox(self)
self.enemyHealthGroup.setGeometry(QRect(23, 140, 300, 80))
self.enemyHealthGroup.setTitle(u'修改Hard难度敌人血量倍数')
self.enemyHealthLineEdit = QLineEdit(self)
self.enemyHealthLineEdit.setValidator(QDoubleValidator())
self.enemyHealthLineEdit.setGeometry(QRect(40, 165, 180, 35))
self.enemyHealthLineEdit.setText('2.5')
self.enemyHealthLineEdit.setStyleSheet('color:#4F4F4F;')
self.enemyHealthLineEdit.setFont(QFont('Arial', 15))
self.enemyHealthButton = QPushButton(self)
self.enemyHealthButton.setGeometry(QRect(238, 164, 65, 37))
self.enemyHealthButton.setText(u'修改')
self.enemyHealthButton.setEnabled(False)
self.enemyHealthLineEdit.setEnabled(False)
# self.enemyHealthButton.clicked.connect(self.enemyHealthModify)
self.enemyWaveGroup = QGroupBox(self)
self.enemyWaveGroup.setGeometry(QRect(23, 240, 300, 80))
self.enemyWaveGroup.setTitle(u'跳波功能 这关共有 0 波敌人')
self.enemyWaveLineEdit = QLineEdit(self)
self.enemyWaveLineEdit.setValidator(QIntValidator())
self.enemyWaveLineEdit.setGeometry(QRect(40, 265, 180, 35))
self.enemyWaveLineEdit.setText('0')
self.enemyWaveLineEdit.setStyleSheet('color:#4F4F4F;')
self.enemyWaveLineEdit.setFont(QFont('Arial', 15))
self.enemyWaveButton = QPushButton(self)
self.enemyWaveButton.setGeometry(QRect(238, 264, 65, 37))
self.enemyWaveButton.setText(u'修改')
self.enemyWaveButton.clicked.connect(self.skipWave)
self.checkTotalWave = None
# self.widgetList = [self.moneyLineEdit, self.moneyButton, self.enemyHealthLineEdit, self.enemyHealthButton, self.enemyWaveLineEdit, self.enemyWaveButton]
self.widgetList = [self.moneyLineEdit, self.moneyButton, self.enemyWaveLineEdit, self.enemyWaveButton]
self.checkKRHD = checkKRHD()
self.checkKRHD.KRHDID.connect(self.KRModify)
self.checkKRHD.start()
def __init__(self, *args):
QWidget.__init__(self, *args)
lo = QHBoxLayout(self)
lo.setContentsMargins(0, 0, 0, 0)
lo.setSpacing(5)
# type selector
self.wtypesel = QComboBox(self)
for i, tp in enumerate(self.ValueTypes):
self.wtypesel.addItem(tp.__name__)
self.wtypesel.activated[int].connect(self._selectTypeNum)
typesel_lab = QLabel("&Type:", self)
typesel_lab.setBuddy(self.wtypesel)
lo.addWidget(typesel_lab, 0)
lo.addWidget(self.wtypesel, 0)
self.wvalue = QLineEdit(self)
self.wvalue_lab = QLabel("&Value:", self)
self.wvalue_lab.setBuddy(self.wvalue)
self.wbool = QComboBox(self)
self.wbool.addItems(["false", "true"])
self.wbool.setCurrentIndex(1)
lo.addWidget(self.wvalue_lab, 0)
lo.addWidget(self.wvalue, 1)
lo.addWidget(self.wbool, 1)
self.wvalue.hide()
# make input validators
self._validators = {int: QIntValidator(self), float: QDoubleValidator(self)}
# select bool type initially
self._selectTypeNum(0)
def createEditor(self, parent, option, index):
"""
Set double validator to default editor.
"""
editor = QStyledItemDelegate.createEditor(self, parent, option,
index)
validator = QDoubleValidator(editor)
editor.setValidator(validator)
return editor
def __init__(self, window, grid, name, plugin_id, address):
# Save the window data.
self.address = address
self.name = name
self.plugin_id = plugin_id
# Initialize this class.
super(PluginLog, self).__init__()
# Initialize a UDP socket for this plugin.
self.udp_socket = socket(AF_INET, SOCK_DGRAM)
# Set socket options.
self.udp_socket.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
self.udp_socket.settimeout(WV_REQ_TIMEOUT)
# Initialize a timer to query data for this plugin.
self.timer = QTimer()
self.timer.timeout.connect(self.refresh)
# Initialize update thread.
self.refresh_thread = LogRefreshThread(self.plugin_id, self.address,
self.udp_socket)
self.refresh_thread.start()
# Connect the data signal.
self.refresh_thread.data_signal.connect(self.do_update)
# Initialize UI for this plugin.
self.PluginName = QtWidgets.QLabel(window)
self.PluginName.setText(name)
grid.addWidget(self.PluginName, grid.rowCount(), 0)
RefreshSpacer = QtWidgets.QSpacerItem(65535, 20,
QtWidgets.QSizePolicy.Maximum,
QtWidgets.QSizePolicy.Minimum)
grid.addItem(RefreshSpacer, (grid.rowCount() - 1), 1)
self.RefreshLable = QtWidgets.QLabel(window)
self.RefreshLable.setText("Refresh Time (ms) :")
grid.addWidget(self.RefreshLable, (grid.rowCount() - 1), 2)
self.Refresh = QtWidgets.QLineEdit(window)
self.Refresh.setValidator(QDoubleValidator(0, 999999, 2))
self.Refresh.setMinimumWidth(50)
self.Refresh.textChanged.connect(self.refersh_time_updated)
self.Refresh.setText('1000')
grid.addWidget(self.Refresh, (grid.rowCount() - 1), 3)
self.PluginData = QtWidgets.QTextBrowser(window)
font = QtGui.QFont()
font.setFamily("Consolas")
self.PluginData.setFont(font)
grid.addWidget(self.PluginData, grid.rowCount(), 0, 1,
grid.columnCount())
def __init__(self, degField, minField, secField, maxDegrees):
super(DmsHandler, self).__init__()
# init validators:
self.intDegValidator = QIntValidator(0, maxDegrees, parent=self)
self.minValidator = QIntValidator(0, 59, parent=self)
self.secValidator = QDoubleValidator(0.0, 59.999, 3, parent=self)
self.secValidator.setNotation(QDoubleValidator.StandardNotation)
self._degField = degField
self._minField = minField
self._secField = secField
self._maxDegrees = maxDegrees
self._degFieldIncrementor = ValueIncrementor(self._degField,
maxDegrees,
doOverflow=False)
self._degFieldIncrementor.fieldDidOverflow.connect(
self.fieldDidOverflow)
self._degField.setValidator(self.intDegValidator)
self._degField.textEdited.connect(self.inputDidChange.emit)
self._minFieldIncrementor = ValueIncrementor(
self._minField, 59, wrapCallback=self.isWrapAllowedFor)
self._minFieldIncrementor.fieldDidOverflow.connect(
self.fieldDidOverflow)
self._minField.setValidator(self.minValidator)
self._minField.textChanged.connect(
partial(self.minorFieldDidChange, self._minField))
self._secFieldIncrementor = ValueIncrementor(
self._secField, 59, wrapCallback=self.isWrapAllowedFor)
self._secFieldIncrementor.fieldDidOverflow.connect(
self.fieldDidOverflow)
self._secField.setValidator(self.secValidator)
self._secField.textChanged.connect(
partial(self.minorFieldDidChange, self._secField))
def __init__(self, parent=None):
super(TeamPokerUIControllerClass, self).__init__(parent)
self.setupUi(self)
self.setStyleSheet(WINDOW_STYLE)
self.stackedWidget.setCurrentIndex(PAGE_MAIN)
self.buttonHostAGame.clicked.connect(lambda f: self.stackedWidget.setCurrentIndex(PAGE_HOST_A_GAME))
self.buttonJoinAGame.clicked.connect(lambda f: self.stackedWidget.setCurrentIndex(PAGE_JOIN_A_GAME))
self.button_test_play_arena.clicked.connect(lambda f: self.stackedWidget.setCurrentIndex(PAGE_PLAYING_ARENA))
self.button_client_to_main_page.clicked.connect(lambda f: self.stackedWidget.setCurrentIndex(PAGE_MAIN))
self.button_host_to_main_page.clicked.connect(lambda f: self.stackedWidget.setCurrentIndex(PAGE_MAIN))
self.button_dev_play_arena_to_main_page.clicked.connect(lambda f: self.stackedWidget.setCurrentIndex(PAGE_MAIN))
self.line_starting_ammount.setValidator(QDoubleValidator(0.0, 100.0, 2))
self.line_host_game_ip.setText(self.get_ip())
self.line_host_game_port.setText(str(5555))
def __init__(self, parent=None):
super(TeamPokerUIControllerClass, self).__init__(parent)
self.setupUi(self)
self.setStyleSheet(WINDOW_STYLE)
self.line_starting_ammount.setValidator(QDoubleValidator(
0.0, 100.0, 2))
self.line_raise_amount.setValidator(QDoubleValidator(0.0, 100.0, 2))
self.stackedWidget.setCurrentIndex(PAGE_MAIN)
self.tabWidget_client_window.setCurrentIndex(0)
self.line_host_game_ip.setText(get_ip()) # TODO: remove
self.line_host_game_port.setText(str(5555)) # TODO: remove
self.table_money_stats.setSelectionBehavior(
QAbstractItemView.SelectRows)
self.table_player_server_statuses.setSelectionBehavior(
QAbstractItemView.SelectRows)
self.listView.setModel(QStandardItemModel())
self.setServerControls(False)
self.init_connects()
self.player_action_array = [
False, False, False, True
] # will hold which of the 3 actions player has selected (CALL, RAISE, FOLD, UNDECIDED)
self.history_rows = -1 # in order to put first row at index 0
def __init__(self, parent, modal=True, flags=Qt.WindowFlags()):
QDialog.__init__(self, parent, flags)
self.model = None
self._model_dir = None
self.setModal(modal)
self.setWindowTitle("Add FITS brick")
lo = QVBoxLayout(self)
lo.setContentsMargins(10, 10, 10, 10)
lo.setSpacing(5)
# file selector
self.wfile = FileSelector(self,
label="FITS filename:",
dialog_label="FITS file",
default_suffix="fits",
file_types="FITS files (*.fits *.FITS)",
file_mode=QFileDialog.ExistingFile)
lo.addWidget(self.wfile)
# overwrite or add mode
lo1 = QGridLayout()
lo.addLayout(lo1)
lo1.setContentsMargins(0, 0, 0, 0)
lo1.addWidget(QLabel("Padding factor:", self), 0, 0)
self.wpad = QLineEdit("2", self)
self.wpad.setValidator(QDoubleValidator(self))
lo1.addWidget(self.wpad, 0, 1)
lo1.addWidget(QLabel("Assign source name:", self), 1, 0)
self.wname = QLineEdit(self)
lo1.addWidget(self.wname, 1, 1)
# OK/cancel buttons
lo.addSpacing(10)
lo2 = QHBoxLayout()
lo.addLayout(lo2)
lo2.setContentsMargins(0, 0, 0, 0)
lo2.setContentsMargins(5, 5, 5, 5)
self.wokbtn = QPushButton("OK", self)
self.wokbtn.setMinimumWidth(128)
self.wokbtn.clicked.connect(self.accept)
self.wokbtn.setEnabled(False)
cancelbtn = QPushButton("Cancel", self)
cancelbtn.setMinimumWidth(128)
cancelbtn.clicked.connect(self.reject)
lo2.addWidget(self.wokbtn)
lo2.addStretch(1)
lo2.addWidget(cancelbtn)
self.setMinimumWidth(384)
# signals
self.wfile.filenameSelected.connect(self._fileSelected)
# internal state
self.qerrmsg = QErrorMessage(self)
def __init__(self) -> None:
"""Inicialize."""
super(NumberEdit, self).__init__()
self.line_edit = QLineEdit(self)
self.label_line_edit = QLabel(self)
self.label_line_edit.setMinimumWidth(150)
lay = QHBoxLayout(self)
lay.addWidget(self.label_line_edit)
lay.addWidget(self.line_edit)
lay.setContentsMargins(0, 0, 0, 0)
self.setLayout(lay)
self.validator = QDoubleValidator()
self.line_edit.setValidator(self.validator)
class AttributeEntryCell (QLineEdit):
selected = pyqtSignal([int, int])
edited = pyqtSignal([int, int])
edited_key = pyqtSignal([object, object]) # will be [list, self.type_]
validators = {
int: QIntValidator(),
float: QDoubleValidator(),
str: None,
}
def __init__(self, row, column, type_, key=None):
super().__init__()
self.row_ = row
self.column_ = column
self.type_ = type_
self.key = key
self.setValidator(self.validators[type_])
self.setFrame(False)
self.setAlignment(Qt.AlignCenter)
self.editingFinished.connect(self.emit_edited)
self.setAcceptDrops(True)
def mousePressEvent(self, ev):
self.select_all()
def focusInEvent(self, ev):
self.select_all()
def select_all(self):
self.selectAll()
self.selected.emit(self.row_, self.column_)
def emit_edited(self):
self.edited.emit(self.row_, self.column_)
self.edited_key.emit(self.key, self.type_(self.text()))
def dragEnterEvent(self, event):
if event.mimeData().hasText() and not event.mimeData().hasUrls():
event.accept()
else:
event.ignore()
def dropEvent(self, event):
self.selectAll()
self.insert(event.mimeData().text().strip())
self.deselect()
self.emit_edited()
def __init__(self):
QDialog.__init__(self)
self.setupUi(self)
self.btnClose.clicked.connect(self.close)
self.validator = QDoubleValidator()
self.txtDestinos.setClearButtonEnabled(True)
self.txtOrigenes.setClearButtonEnabled(True)
self.txtDestinos.setValidator(QIntValidator())
self.txtOrigenes.setValidator(QIntValidator())
self.scrollContent.setLayout(self.gridData)
self.txtOrigenes.textChanged['QString'].connect(self.generate_inputs)
self.txtDestinos.textChanged['QString'].connect(self.generate_inputs)
self.resize(720, 480)
def create_widgets(self):
'''create widgets on main window'''
self.main_listview = TableWidgetDragRows(self)
self.main_listview.move(10, 60)
self.main_listview.setFixedSize(200, 500)
self.main_listview.setColumnCount(2)
self.main_listview.setHorizontalHeaderLabels(
['file name', 'file path'])
self.main_listview.setEditTriggers(QTableWidget.NoEditTriggers)
self.main_listview.setColumnWidth(0, 140)
self.main_listview.setColumnWidth(1, 400)
self.main_listview.hideColumn(1)
self.label_drop_here = QLabel('File Drop Here', self)
self.label_drop_here.move(25, 30)
self.pbutton_remove_row = QPushButton('remove', self)
self.pbutton_remove_row.move(15, 570)
self.pbutton_remove_row.clicked.connect(self.remove_row)
self.pbutton_remove_row = QPushButton('remove all', self)
self.pbutton_remove_row.move(15, 590)
self.pbutton_remove_row.clicked.connect(self.remove_row_all)
self.label_legend = QLabel('Graph Legend', self)
self.label_legend.move(235, 30)
self.textedit_legend = QTextEdit(self)
self.textedit_legend.setFixedSize(200, 480)
self.textedit_legend.move(220, 80)
self.label_legend_unit = QLabel('Legend unit', self)
self.label_legend_unit.move(220, 570)
self.textbox_legend_unit = QLineEdit(self)
self.textbox_legend_unit.move(220, 590)
self.label_xlabel = QLabel('xlabel', self)
self.label_xlabel.move(465, 30)
self.textbox_xlabel = QLineEdit(self)
self.textbox_xlabel.move(465, 50)
self.textbox_xlabel.setFixedWidth(300)
self.label_ylabel = QLabel('ylabel', self)
self.label_ylabel.move(465, 80)
self.textbox_ylabel = QLineEdit(self)
self.textbox_ylabel.move(465, 100)
self.textbox_ylabel.setFixedWidth(300)
self.checkbox_xlog = QCheckBox('x logscale', self)
self.checkbox_xlog.move(465, 130)
self.checkbox_ylog = QCheckBox('y logscale', self)
self.checkbox_ylog.move(465, 150)
self.checkbox_xtick_label = QCheckBox('without xtick label', self)
self.checkbox_xtick_label.move(630, 130)
self.checkbox_ytick_label = QCheckBox('without ytick label', self)
self.checkbox_ytick_label.move(630, 150)
self.checkbox_wline_plot = QCheckBox('without line plot', self)
self.checkbox_wline_plot.move(465, 180)
self.checkbox_normarize_plot = QCheckBox('normarized plot', self)
self.checkbox_normarize_plot.move(465, 200)
self.checkbox_legend_plot = QCheckBox('with legend', self)
self.checkbox_legend_plot.move(630, 180)
self.combobox_legend_position = QComboBox(self)
self.combobox_legend_position.move(630, 195)
self.combobox_legend_position.addItems(
['upper right', 'upper left', 'lower right', 'lower left'])
self.combobox_legend_position.setFixedWidth(140)
self.checkbox_xrange = QCheckBox('set x range', self)
self.checkbox_xrange.move(465, 240)
self.textbox_xmin = QLineEdit(self)
self.textbox_xmin.move(470, 260)
self.textbox_xmin.setValidator(QDoubleValidator())
self.label_x_to = QLabel('to', self)
self.label_x_to.move(600, 260)
self.textbox_xmax = QLineEdit(self)
self.textbox_xmax.move(620, 260)
self.textbox_xmax.setValidator(QDoubleValidator())
self.checkbox_yrange = QCheckBox('set y range', self)
self.checkbox_yrange.move(465, 290)
self.textbox_ymin = QLineEdit(self)
self.textbox_ymin.move(470, 310)
self.textbox_ymin.setValidator(QDoubleValidator())
self.label_y_to = QLabel('to', self)
self.label_y_to.move(600, 310)
self.textbox_ymax = QLineEdit(self)
self.textbox_ymax.move(620, 310)
self.textbox_ymax.setValidator(QDoubleValidator())
self.label_plot_style = QLabel('Plot Style', self)
self.label_plot_style.move(465, 535)
self.combobox_plot_style = QComboBox(self)
self.combobox_plot_style.move(550, 530)
self.combobox_plot_style.addItems([PLOTMODE_1, PLOTMODE_2])
self.combobox_plot_style.setFixedWidth(200)
self.pbutton_save = QPushButton('Plot and Save', self)
self.pbutton_save.move(465, 570)
self.pbutton_save.clicked.connect(self.graph_save)
def BuildWindowLayout(self):
self.rootGridLayout = QtGui.QGridLayout()
self.rootGridLayout.setContentsMargins(0, 0, 0, 0)
self.mainGridLayout1 = QtGui.QGridLayout()
self.mainGridLayout1.setContentsMargins(0, 0, 0, 0)
self.mainGridLayout2 = QtGui.QGridLayout()
self.mainGridLayout2.setContentsMargins(0, 0, 0, 0)
self.setLayout(self.rootGridLayout)
self.rootGridLayout.addLayout(self.mainGridLayout1, 1, 1)
self.rootGridLayout.addLayout(self.mainGridLayout2, 3, 1)
self.mainGridLayout1.setColumnStretch(0, 2)
self.mainGridLayout1.setColumnStretch(1, 1)
self.mainGridLayout2.setColumnStretch(0, 2)
self.mainGridLayout2.setColumnStretch(1, 1)
rowNumber = 0
# Root left and right
self.rootLeftBlock = QtGui.QWidget()
self.rootLeftBlock.setStyleSheet(self.STR_BORDER_BLOCK_STYLESHEET)
self.rootLeftBlock.setFixedWidth(20)
self.rootRightBlock = QtGui.QWidget()
self.rootRightBlock.setStyleSheet(self.STR_BORDER_BLOCK_STYLESHEET)
self.rootRightBlock.setFixedWidth(20)
self.rootGridLayout.addWidget(self.rootLeftBlock, 0, 0, 5, 1)
self.rootGridLayout.addWidget(self.rootRightBlock, 0, 3, 5, 1)
# Root top and bottom
self.rootTopBlock = QtGui.QWidget()
self.rootTopBlock.setStyleSheet(self.STR_BORDER_BLOCK_STYLESHEET)
self.rootTopBlock.setFixedHeight(20)
self.rootBottomBlock = QtGui.QWidget()
self.rootBottomBlock.setStyleSheet(self.STR_BORDER_BLOCK_STYLESHEET)
self.rootBottomBlock.setFixedHeight(60)
self.rootGridLayout.addWidget(self.rootTopBlock, 0, 0, 1, 4)
self.rootGridLayout.addWidget(self.rootBottomBlock, 4, 0, 1, 4)
# Reuse ============================================================================
self.SeparatorLine = QtGui.QWidget()
self.SeparatorLine.setStyleSheet(self.STR_BORDER_BLOCK_STYLESHEET)
self.SeparatorLine.setFixedHeight(15)
self.SeparatorLine2 = QtGui.QWidget()
self.SeparatorLine2.setStyleSheet(self.STR_BORDER_BLOCK_STYLESHEET)
self.SeparatorLine2.setFixedHeight(15)
# Trading Account layout ===========================================================
self.lblTitleTradingAccount = QtGui.QLabel("Coinbase Pro Connexion parameters")
self.lblTitleTradingAccount.setStyleSheet(self.STR_QLABEL_TITLE_STYLESHEET);
self.mainGridLayout1.addWidget(self.lblTitleTradingAccount, rowNumber, 0)
rowNumber += 1
# API Key
self.lblAPIKey = QtGui.QLabel("API Key:")
self.lblAPIKey.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblAPIKey.setFixedHeight(30)
self.lblAPIKey.setContentsMargins(20,0,0,0)
self.mainGridLayout1.addWidget(self.lblAPIKey, rowNumber, 0)
self.txtAPIKey = QtGui.QLineEdit()
self.txtAPIKey.setStyleSheet(self.STR_QTEXTEDIT_STYLESHEET)
self.mainGridLayout1.addWidget(self.txtAPIKey, rowNumber, 1)
rowNumber += 1
# Secret Key
self.lblSecretKey = QtGui.QLabel("Secret Key:")
self.lblSecretKey.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblSecretKey.setFixedHeight(30)
self.lblSecretKey.setContentsMargins(20,0,0,0)
self.mainGridLayout1.addWidget(self.lblSecretKey, rowNumber, 0)
self.txtSecretKey = QtGui.QLineEdit()
self.txtSecretKey.setStyleSheet(self.STR_QTEXTEDIT_STYLESHEET)
self.txtSecretKey.setEchoMode(QtGui.QLineEdit.Password)
self.mainGridLayout1.addWidget(self.txtSecretKey, rowNumber, 1)
rowNumber += 1
# Passphrase
self.lblPassPhrase = QtGui.QLabel("Passphrase:")
self.lblPassPhrase.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblPassPhrase.setFixedHeight(30)
self.lblPassPhrase.setContentsMargins(20,0,0,0)
self.mainGridLayout1.addWidget(self.lblPassPhrase, rowNumber, 0)
self.txtPassPhrase = QtGui.QLineEdit()
self.txtPassPhrase.setStyleSheet(self.STR_QTEXTEDIT_STYLESHEET)
self.txtPassPhrase.setEchoMode(QtGui.QLineEdit.Password)
self.mainGridLayout1.addWidget(self.txtPassPhrase, rowNumber, 1)
rowNumber += 1
# Authorization checkbox
self.lblPermissions = QtGui.QLabel("Note: Make sure you enabled the <b>View</b> and <b>Trade</b> permissions when creating your API keys on your Coinbase Pro profile. These permissions are required for Astibot to operate.")
self.lblPermissions.setWordWrap(True)
self.lblPermissions.setStyleSheet(self.STR_QLABEL_NOTE_STYLESHEET);
self.lblAuthorization = QtGui.QLabel(self.STR_CHECKBOX_AUTHORIZATION_TEXT)
self.lblAuthorization.setStyleSheet(self.STR_QCHECKBOX_LABEL_STYLESHEET)
self.lblAuthorization.setWordWrap(True)
self.mainGridLayout1.addWidget(self.lblPermissions, rowNumber, 0, 1, 2)
rowNumber += 1
self.mainGridLayout1.addWidget(self.lblAuthorization, rowNumber, 0, 1, 2)
rowNumber += 1
# Separator
self.rootGridLayout.addWidget(self.SeparatorLine, 2, 0, 1, 4)
rowNumber = 0
# Trading Parameters layout ========================================================
self.lblTitleTradingParameters = QtGui.QLabel("Trading parameters")
self.lblTitleTradingParameters.setStyleSheet(self.STR_QLABEL_TITLE_STYLESHEET);
self.mainGridLayout2.addWidget(self.lblTitleTradingParameters, rowNumber, 0)
rowNumber += 1
# Trading pair
self.lblTradingPair = QtGui.QLabel("Trading pair:")
self.lblTradingPair.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblTradingPair.setFixedHeight(30)
self.lblTradingPair.setContentsMargins(20,0,0,0)
self.mainGridLayout2.addWidget(self.lblTradingPair, rowNumber, 0)
self.comboTradingPair = QtGui.QComboBox()
self.comboTradingPair.setView(QtGui.QListView()) # Necessary to allow height change
for pair in self.pairs:
self.comboTradingPair.addItem(pair)
self.comboTradingPair.currentIndexChanged.connect(self.EventComboTradingPairChanged)
self.comboTradingPair.setStyleSheet(self.STR_COMBO_STYLESHEET)
self.mainGridLayout2.addWidget(self.comboTradingPair, rowNumber, 1)
rowNumber += 1
# Fiat amount to invest
self.lblFiatPercentageToInvest = QtGui.QLabel("Percentage of " + self.theSettings.SETT_GetSettings()["strFiatType"] + " account balance to invest in trades:")
self.lblFiatPercentageToInvest.setStyleSheet(self.STR_QLABEL_STYLESHEET)
self.lblFiatPercentageToInvest.setFixedHeight(30)
self.lblFiatPercentageToInvest.setContentsMargins(20,0,0,0)
self.mainGridLayout2.addWidget(self.lblFiatPercentageToInvest, rowNumber, 0)
self.hBoxFiatAmount = QtGui.QHBoxLayout()
self.sliderFiatAmount = QtGui.QSlider(QtCore.Qt.Horizontal)
self.sliderFiatAmount.setMinimum(1)
self.sliderFiatAmount.setMaximum(99)
self.sliderFiatAmount.setValue(50)
self.sliderFiatAmount.setStyleSheet(self.STR_QSLIDER_STYLESHEET)
self.sliderFiatAmount.valueChanged.connect(self.EventMovedSliderFiatAmountInvest)
self.lblFiatAmountValue = QtGui.QLabel("90 %")
self.lblFiatAmountValue.setStyleSheet(self.STR_QLABEL_STYLESHEET)
self.lblFiatAmountValue.setFixedWidth(self.RIGHT_LABELS_WIDTH_IN_PX)
self.hBoxFiatAmount.addWidget(self.sliderFiatAmount)
self.hBoxFiatAmount.addWidget(self.lblFiatAmountValue)
self.mainGridLayout2.addLayout(self.hBoxFiatAmount, rowNumber, 1)
rowNumber += 1
# Coinbase Pro Taker fee
self.lblTakerFee = QtGui.QLabel("Coinbase Pro Taker and Maker order fee:")
self.lblTakerFee.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblTakerFee.setFixedHeight(30)
self.lblTakerFee.setContentsMargins(20,0,0,0)
self.mainGridLayout2.addWidget(self.lblTakerFee, rowNumber, 0)
self.sliderTakerFee = QtGui.QSlider(QtCore.Qt.Horizontal)
self.sliderTakerFee.setMinimum(theConfig.CONFIG_PLATFORM_TAKER_FEE_MIN_ON_SLIDER)
self.sliderTakerFee.setMaximum(theConfig.CONFIG_PLATFORM_TAKER_FEE_MAX_ON_SLIDER)
self.sliderTakerFee.setSingleStep(1)
self.sliderTakerFee.setValue(theConfig.CONFIG_PLATFORM_TAKER_FEE_DEFAULT_VALUE)
self.sliderTakerFee.setStyleSheet(self.STR_QSLIDER_STYLESHEET)
self.sliderTakerFee.valueChanged.connect(self.EventMovedSliderTakerFee)
self.lblTakerFeePercent = QtGui.QLabel("%")
self.lblTakerFeePercent.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblTakerFeePercent.setFixedWidth(self.RIGHT_LABELS_WIDTH_IN_PX)
self.hBoxTakerFee = QtGui.QHBoxLayout()
self.hBoxTakerFee.addWidget(self.sliderTakerFee)
self.hBoxTakerFee.addWidget(self.lblTakerFeePercent)
self.mainGridLayout2.addLayout(self.hBoxTakerFee, rowNumber, 1)
rowNumber += 1
# Sell trigger
self.lblSellTrigger = QtGui.QLabel("Auto-Sell trigger (% above buy price, set 0 to disable):")
self.lblSellTrigger.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblSellTrigger.setFixedHeight(30)
self.lblSellTrigger.setContentsMargins(20,0,0,0)
self.mainGridLayout2.addWidget(self.lblSellTrigger, rowNumber, 0)
self.sliderSellTrigger = QtGui.QSlider(QtCore.Qt.Horizontal)
self.sliderSellTrigger.setMinimum(theConfig.CONFIG_SELL_TRIGGER_PERCENTAGE_MIN_ON_SLIDER)
self.sliderSellTrigger.setMaximum(theConfig.CONFIG_SELL_TRIGGER_PERCENTAGE_MAX_ON_SLIDER)
self.sliderSellTrigger.setSingleStep(1)
self.sliderSellTrigger.setValue(theConfig.CONFIG_SELL_TRIGGER_PERCENTAGE_DEFAULT_VALUE)
self.sliderSellTrigger.setStyleSheet(self.STR_QSLIDER_STYLESHEET)
self.sliderSellTrigger.valueChanged.connect(self.EventMovedSliderSellTrigger)
self.lblSellTriggerPercent = QtGui.QLabel("%")
self.lblSellTriggerPercent.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblSellTriggerPercent.setFixedWidth(self.RIGHT_LABELS_WIDTH_IN_PX)
self.hBoxSellTrigger = QtGui.QHBoxLayout()
self.hBoxSellTrigger.addWidget(self.sliderSellTrigger)
self.hBoxSellTrigger.addWidget(self.lblSellTriggerPercent)
self.mainGridLayout2.addLayout(self.hBoxSellTrigger, rowNumber, 1)
rowNumber += 1
# Auto-sell by percentage threshold
self.lblAutoSellThreshold = QtGui.QLabel("Stop-loss trigger (% below buy price, set 0 to disable):")
self.lblAutoSellThreshold.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblAutoSellThreshold.setFixedHeight(30)
self.lblAutoSellThreshold.setContentsMargins(20,0,0,0)
self.mainGridLayout2.addWidget(self.lblAutoSellThreshold, rowNumber, 0)
self.sliderAutoSellThreshold = QtGui.QSlider(QtCore.Qt.Horizontal)
self.sliderAutoSellThreshold.setMinimum(theConfig.CONFIG_PLATFORM_AUTO_SELL_THRESHOLD_MIN_ON_SLIDER)
self.sliderAutoSellThreshold.setMaximum(theConfig.CONFIG_PLATFORM_AUTO_SELL_THRESHOLD_MAX_ON_SLIDER)
self.sliderAutoSellThreshold.setSingleStep(1)
self.sliderAutoSellThreshold.setValue(theConfig.CONFIG_PLATFORM_AUTO_SELL_THRESHOLD_DEFAULT_VALUE)
self.sliderAutoSellThreshold.setStyleSheet(self.STR_QSLIDER_STYLESHEET)
self.sliderAutoSellThreshold.valueChanged.connect(self.EventMovedSliderAutoSell)
self.lblAutoSellPercent = QtGui.QLabel("%")
self.lblAutoSellPercent.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblAutoSellPercent.setFixedWidth(self.RIGHT_LABELS_WIDTH_IN_PX)
self.hBoxAutoSell = QtGui.QHBoxLayout()
self.hBoxAutoSell.addWidget(self.sliderAutoSellThreshold)
self.hBoxAutoSell.addWidget(self.lblAutoSellPercent)
self.mainGridLayout2.addLayout(self.hBoxAutoSell, rowNumber, 1)
rowNumber += 1
# Simulated fiat account balance
self.lblSimulatedFiatBalance = QtGui.QLabel("Simulated fiat account balance (simulation mode only):")
self.lblSimulatedFiatBalance.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblSimulatedFiatBalance.setFixedHeight(30)
self.lblSimulatedFiatBalance.setContentsMargins(20,0,0,0)
self.mainGridLayout2.addWidget(self.lblSimulatedFiatBalance, rowNumber, 0)
self.txtSimulatedFiatBalance = QtGui.QLineEdit()
self.txtSimulatedFiatBalance.setStyleSheet(self.STR_QTEXTEDIT_STYLESHEET)
self.txtSimulatedFiatBalance.setFixedWidth(80)
self.txtSimulatedFiatBalance.setValidator(QDoubleValidator())
self.lblSimulatedFiatBalance = QtGui.QLabel(self.theSettings.SETT_GetSettings()["strFiatType"])
self.lblSimulatedFiatBalance.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblSimulatedFiatBalance.setFixedWidth(self.RIGHT_LABELS_WIDTH_IN_PX)
self.hBoxSimulatedFiatBalance = QtGui.QHBoxLayout()
self.hBoxSimulatedFiatBalance.addWidget(self.txtSimulatedFiatBalance, QtCore.Qt.AlignLeft)
self.hBoxSimulatedFiatBalance.addWidget(self.lblSimulatedFiatBalance, QtCore.Qt.AlignLeft)
self.mainGridLayout2.addLayout(self.hBoxSimulatedFiatBalance, rowNumber, 1, QtCore.Qt.AlignLeft)
rowNumber += 1
# Simulation speed
self.lblSimulationSpeed = QtGui.QLabel("Simulation speed (simulation mode only):")
self.lblSimulationSpeed.setStyleSheet(self.STR_QLABEL_STYLESHEET)
self.lblSimulationSpeed.setFixedHeight(30)
self.lblSimulationSpeed.setContentsMargins(20, 0, 0, 0)
self.mainGridLayout2.addWidget(self.lblSimulationSpeed, rowNumber, 0)
self.sliderSimulationSpeed = QtGui.QSlider(QtCore.Qt.Horizontal)
self.sliderSimulationSpeed.setMinimum(0)
self.sliderSimulationSpeed.setMaximum(100)
self.sliderSimulationSpeed.setValue(50)
self.sliderSimulationSpeed.setStyleSheet(self.STR_QSLIDER_STYLESHEET)
self.sliderSimulationSpeed.valueChanged.connect(self.EventMovedSliderSimulationSpeed)
self.lblSlow = QtGui.QLabel("Slow")
self.lblSlow.setStyleSheet(self.STR_QLABEL_STYLESHEET)
self.lblFast = QtGui.QLabel("Fast")
self.lblFast.setStyleSheet(self.STR_QLABEL_STYLESHEET)
self.lblFast.setFixedWidth(self.RIGHT_LABELS_WIDTH_IN_PX)
self.hBoxSimulationSpeed = QtGui.QHBoxLayout()
self.hBoxSimulationSpeed.addWidget(self.lblSlow)
self.hBoxSimulationSpeed.addWidget(self.sliderSimulationSpeed)
self.hBoxSimulationSpeed.addWidget(self.lblFast, QtCore.Qt.AlignLeft)
self.mainGridLayout2.addLayout(self.hBoxSimulationSpeed, rowNumber, 1)
rowNumber += 1
# Simulation time range
self.lblSimulationTimeRange = QtGui.QLabel("Simulation time range (simulation mode only):")
self.lblSimulationTimeRange.setFixedHeight(30)
self.lblSimulationTimeRange.setStyleSheet(self.STR_QLABEL_STYLESHEET);
self.lblSimulationTimeRange.setContentsMargins(20, 0, 0, 0)
self.mainGridLayout2.addWidget(self.lblSimulationTimeRange, rowNumber, 0)
self.comboSimulationTimeRange = QtGui.QComboBox()
self.comboSimulationTimeRange.setView(QtGui.QListView()) # Necessary to allow height change
self.comboSimulationTimeRange.addItem("Last 24h")
self.comboSimulationTimeRange.addItem("Last 48h")
self.comboSimulationTimeRange.addItem("Last 72h")
self.comboSimulationTimeRange.addItem("Last Week")
self.comboSimulationTimeRange.setStyleSheet(self.STR_COMBO_STYLESHEET)
self.comboSimulationTimeRange.currentIndexChanged.connect(self.EventComboSimulationTimeRange)
self.mainGridLayout2.addWidget(self.comboSimulationTimeRange, rowNumber, 1)
rowNumber += 1
# Bottom buttons
self.btnCancel = QtGui.QPushButton("Cancel")
self.btnCancel.setStyleSheet(self.STR_QBUTTON_CANCEL_STYLESHEET)
self.btnCancel.setFixedWidth(120)
self.btnCancel.setFixedHeight(38)
self.btnCancel.clicked.connect(self.EventCancelButtonClick)
self.btnCancel.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor))
self.btnApply = QtGui.QPushButton("Apply and Close")
self.btnApply.setStyleSheet(self.STR_QBUTTON_APPLY_STYLESHEET)
self.btnApply.setFixedWidth(140)
self.btnApply.setFixedHeight(38)
self.btnApply.clicked.connect(self.EventApplylButtonClick)
self.btnApply.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor))
self.hBoxBottomButtons = QtGui.QHBoxLayout()
self.hBoxBottomButtons.addWidget(self.btnCancel, QtCore.Qt.AlignRight)
self.hBoxBottomButtons.addWidget(self.btnApply, QtCore.Qt.AlignRight)
self.rootBottomBlock.setLayout(self.hBoxBottomButtons)
rowNumber += 1
def __init__(self, settings_dictionary):
"""
Settings user interface (UI) constructor.
Returns:
QDialog (`obj`): Settings ui object
"""
super(SettingsDialog, self).__init__()
uic.loadUi(resource_path(os.path.join('ui', 'setting_dialog.ui')),
self)
self.setWindowTitle('pyIMD :: Settings')
self.settingsIcon = QIcon()
self.settingsIcon.addPixmap(
self.style().standardPixmap(QStyle.SP_FileDialogDetailedView),
QIcon.Disabled, QIcon.Off)
self.setWindowIcon(self.settingsIcon)
self.frequency_offset_spin.setMinimum(1)
self.frequency_offset_spin.setMaximum(10**9)
self.settings_dictionary = settings_dictionary
# Establish connections
self.defaultBtn.clicked.connect(self.set_defaults)
self.commitBtn.clicked.connect(self.commit_parameters)
self.cancelBtn.clicked.connect(self.close_settings_dialog)
self.do_offset_corr_chkbox.clicked.connect(
self.on_toggle_frequency_offset)
self.offsetGroupBox.setEnabled(False)
self.frequency_offset_edit.setEnabled(False)
self.frequency_offset_mode_auto.setChecked(True)
self.frequency_offset_mode_auto.toggled.connect(
self.on_frequency_offset_mode_auto)
self.frequency_offset_mode_manual.toggled.connect(
self.on_frequency_offset_mode_manual)
double_validator = QDoubleValidator()
self.figure_width_edit.setValidator(double_validator)
self.figure_width_edit.textChanged.connect(self.check_state)
self.figure_height_edit.setValidator(double_validator)
self.figure_height_edit.textChanged.connect(self.check_state)
self.figure_resolution_edit.setValidator(double_validator)
self.figure_resolution_edit.textChanged.connect(self.check_state)
self.conversion_factor_hz_edit.setValidator(double_validator)
self.conversion_factor_hz_edit.textChanged.connect(self.check_state)
self.conversion_factor_deg_edit.setValidator(double_validator)
self.conversion_factor_deg_edit.textChanged.connect(self.check_state)
self.spring_constant_edit.setValidator(double_validator)
self.spring_constant_edit.textChanged.connect(self.check_state)
self.cantilever_length_edit.setValidator(double_validator)
self.cantilever_length_edit.textChanged.connect(self.check_state)
self.cell_position_edit.setValidator(double_validator)
self.cell_position_edit.textChanged.connect(self.check_state)
self.read_text_data_from_line_edit.setValidator(double_validator)
self.read_text_data_from_line_edit.textChanged.connect(
self.check_state)
self.figure_plot_every_nth_point_edit.setValidator(double_validator)
self.figure_plot_every_nth_point_edit.textChanged.connect(
self.check_state)
self.rolling_window_size_edit.setValidator(double_validator)
self.rolling_window_size_edit.textChanged.connect(self.check_state)
self.frequency_offset_edit.setValidator(double_validator)
self.frequency_offset_edit.textChanged.connect(self.check_state)
reg_ex = QRegExp("[0-9-a-z-A-Z_]+")
self.figure_name_wo_cell_edit.setValidator(
QRegExpValidator(reg_ex, self.figure_name_wo_cell_edit))
self.figure_name_wo_cell_edit.textChanged.connect(self.check_state)
self.figure_name_w_cell_edit.setValidator(
QRegExpValidator(reg_ex, self.figure_name_w_cell_edit))
self.figure_name_w_cell_edit.textChanged.connect(self.check_state)
self.figure_name_data_edit.setValidator(
QRegExpValidator(reg_ex, self.figure_name_data_edit))
self.figure_name_data_edit.textChanged.connect(self.check_state)
self.figure_unit_edit.setValidator(
QRegExpValidator(QRegExp("[a-z-A-Z_]+"),
self.figure_name_wo_cell_edit))
self.figure_unit_edit.textChanged.connect(self.check_state)
self.figure_format_edit.setValidator(
QRegExpValidator(QRegExp(".+[a-z-A-Z_]"),
self.figure_name_wo_cell_edit))
self.figure_format_edit.textChanged.connect(self.check_state)
self.text_data_delimiter_edit.setValidator(
QRegExpValidator(QRegExp("(?:\\\{1}\w*)"),
self.text_data_delimiter_edit))
self.text_data_delimiter_edit.textChanged.connect(self.check_state)
self.intial_param_guess_edit.setValidator(
QRegExpValidator(QRegExp("(?:\\[\d+.+,\s*)+\d+.+\\]{1}"),
self.intial_param_guess_edit))
self.intial_param_guess_edit.textChanged.connect(self.check_state)
self.lower_param_bound_edit.setValidator(
QRegExpValidator(QRegExp("(?:\\[\d+.+,\s*)+\d+.+\\]{1}"),
self.lower_param_bound_edit))
self.lower_param_bound_edit.textChanged.connect(self.check_state)
self.upper_param_bound_edit.setValidator(
QRegExpValidator(QRegExp("(?:\\[\d+.+,\s*)+\d+.+\\]{1}"),
self.upper_param_bound_edit))
self.upper_param_bound_edit.textChanged.connect(self.check_state)
def __init__(self, parent, modal=True, flags=Qt.WindowFlags()):
QDialog.__init__(self, parent, flags)
self.model = None
self._model_dir = None
self.setModal(modal)
self.setWindowTitle("Convert sources to FITS brick")
lo = QVBoxLayout(self)
lo.setContentsMargins(10, 10, 10, 10)
lo.setSpacing(5)
# file selector
self.wfile = FileSelector(self,
label="FITS filename:",
dialog_label="Output FITS file",
default_suffix="fits",
file_types="FITS files (*.fits *.FITS)",
file_mode=QFileDialog.ExistingFile)
lo.addWidget(self.wfile)
# reference frequency
lo1 = QHBoxLayout()
lo.addLayout(lo1)
lo1.setContentsMargins(0, 0, 0, 0)
label = QLabel("Frequency, MHz:", self)
lo1.addWidget(label)
tip = """<P>If your sky model contains spectral information (such as spectral indices), then a brick may be generated
for a specific frequency. If a frequency is not specified here, the reference frequency of the model sources will be assumed.</P>"""
self.wfreq = QLineEdit(self)
self.wfreq.setValidator(QDoubleValidator(self))
label.setToolTip(tip)
self.wfreq.setToolTip(tip)
lo1.addWidget(self.wfreq)
# beam gain
lo1 = QHBoxLayout()
lo.addLayout(lo1)
lo1.setContentsMargins(0, 0, 0, 0)
self.wpb_apply = QCheckBox("Apply primary beam expression:", self)
self.wpb_apply.setChecked(True)
lo1.addWidget(self.wpb_apply)
tip = """<P>If this option is specified, a primary power beam gain will be applied to the sources before inserting
them into the brick. This can be any valid Python expression making use of the variables 'r' (corresponding
to distance from field centre, in radians) and 'fq' (corresponding to frequency.)</P>"""
self.wpb_exp = QLineEdit(self)
self.wpb_apply.setToolTip(tip)
self.wpb_exp.setToolTip(tip)
lo1.addWidget(self.wpb_exp)
# overwrite or add mode
lo1 = QHBoxLayout()
lo.addLayout(lo1)
lo1.setContentsMargins(0, 0, 0, 0)
self.woverwrite = QRadioButton("overwrite image", self)
self.woverwrite.setChecked(True)
lo1.addWidget(self.woverwrite)
self.waddinto = QRadioButton("add into image", self)
lo1.addWidget(self.waddinto)
# add to model
self.wadd = QCheckBox(
"Add resulting brick to sky model as a FITS image component", self)
lo.addWidget(self.wadd)
lo1 = QHBoxLayout()
lo.addLayout(lo1)
lo1.setContentsMargins(0, 0, 0, 0)
self.wpad = QLineEdit(self)
self.wpad.setValidator(QDoubleValidator(self))
self.wpad.setText("1.1")
lab = QLabel("...with padding factor:", self)
lab.setToolTip(
"""<P>The padding factor determines the amount of null padding inserted around the image during
the prediction stage. Padding alleviates the effects of tapering and detapering in the uv-brick, which can show
up towards the edges of the image. For a factor of N, the image will be padded out to N times its original size.
This increases memory use, so if you have no flux at the edges of the image anyway, then a pad factor of 1 is
perfectly fine.</P>""")
self.wpad.setToolTip(lab.toolTip())
self.wadd.toggled[bool].connect(self.wpad.setEnabled)
self.wadd.toggled[bool].connect(lab.setEnabled)
self.wpad.setEnabled(False)
lab.setEnabled(False)
lo1.addStretch(1)
lo1.addWidget(lab, 0)
lo1.addWidget(self.wpad, 1)
self.wdel = QCheckBox(
"Remove from the sky model sources that go into the brick", self)
lo.addWidget(self.wdel)
# OK/cancel buttons
lo.addSpacing(10)
lo2 = QHBoxLayout()
lo.addLayout(lo2)
lo2.setContentsMargins(5, 5, 5, 5)
self.wokbtn = QPushButton("OK", self)
self.wokbtn.setMinimumWidth(128)
self.wokbtn.clicked.connect(self.accept)
self.wokbtn.setEnabled(False)
cancelbtn = QPushButton("Cancel", self)
cancelbtn.setMinimumWidth(128)
cancelbtn.clicked.connect(self.reject)
lo2.addWidget(self.wokbtn)
lo2.addStretch(1)
lo2.addWidget(cancelbtn)
self.setMinimumWidth(384)
# signals
self.wfile.filenameSelected.connect(self._fileSelected)
# internal state
self.qerrmsg = QErrorMessage(self)
def initUI(self):
self.container = QToolBox()
self.setWidget(self.container)
self.b_save_edit = QPushButton("Save current edit")
self.b_save_edit.clicked.connect(self._applySaveEdit)
self.container.addItem(OptionBox([self.b_save_edit]), "Save")
self.tf_importance_point_count = QLineEdit()
self.tf_importance_point_count.setPlaceholderText(
"Number of Points to Sample")
self.tf_importance_point_count.setValidator(
QIntValidator(1, 1000000, self))
self.b_importance_apply = QPushButton("Apply Sampling")
self.b_importance_apply.clicked.connect(
self._applyFaceImportanceSampling)
self.container.addItem(
OptionBox(
[self.tf_importance_point_count, self.b_importance_apply]),
"Importance Sampling (Mesh)")
self.tf_poisson_point_count = QLineEdit()
self.tf_poisson_point_count.setPlaceholderText(
"Number of Points to Sample")
self.tf_poisson_point_count.setValidator(
QIntValidator(1, 1000000, self))
self.tf_poisson_radius = QLineEdit()
self.tf_poisson_radius.setPlaceholderText(
"Radius of the poisson disks")
self.tf_poisson_radius.setValidator(QDoubleValidator(
0.0, 2.0, 5, self))
self.b_poisson_apply = QPushButton("Apply Sampling")
self.b_poisson_apply.clicked.connect(self._applyPoissonDiskSampling)
self.container.addItem(
OptionBox([
self.tf_poisson_point_count, self.tf_poisson_radius,
self.b_poisson_apply
]), "Poisson Sampling (Mesh)")
self.tf_montecarlo_point_count = QLineEdit()
self.tf_montecarlo_point_count.setPlaceholderText(
"Number of Points to Sample")
self.tf_montecarlo_point_count.setValidator(
QIntValidator(1, 1000000, self))
self.b_montecarlo_apply = QPushButton("Apply Sampling")
self.b_montecarlo_apply.clicked.connect(self._applyMontecarloSampling)
self.container.addItem(
OptionBox(
[self.tf_montecarlo_point_count, self.b_montecarlo_apply]),
"Montecarlo Sampling (Mesh)")
self.tf_centroid_count = QLineEdit()
self.tf_centroid_count.setPlaceholderText("Centroid Count")
self.tf_centroid_count.setValidator(QIntValidator(1, 1000000, self))
self.b_show_centroids = QPushButton("Apply FPS")
self.b_show_centroids.clicked.connect(self._applyFPS)
self.container.addItem(
OptionBox([self.tf_centroid_count, self.b_show_centroids]),
"FPS Sampling (Point)")
self.tf_show_pp2_centroids = QLineEdit()
self.tf_show_pp2_centroids.setPlaceholderText("Number of Centroids")
self.tf_show_pp2_centroids.setValidator(QIntValidator(
1, 1000000, self))
self.tf_show_pp2_centroids_with_ball = QLineEdit()
self.tf_show_pp2_centroids_with_ball.setPlaceholderText(
"Number of Centroids with plotted radius")
self.tf_show_pp2_centroids_with_ball.setValidator(
QIntValidator(1, 1000000, self))
self.tf_show_pp2_radius = QLineEdit()
self.tf_show_pp2_radius.setPlaceholderText(
"Radius of the neighbour area")
self.tf_show_pp2_radius.setValidator(
QDoubleValidator(0.0, 2.0, 5, self))
self.b_show_pp2_step = QPushButton("Apply Sampling")
self.b_show_pp2_step.clicked.connect(self._show_pp2_step)
self.container.addItem(
OptionBox([
self.tf_show_pp2_centroids,
self.tf_show_pp2_centroids_with_ball, self.tf_show_pp2_radius,
self.b_show_pp2_step
]), "Show PointNet2 sampling")
def __init__(self, parent):
LineEdit.__init__(self, parent)
self.setValidator(QDoubleValidator())
self.editComplete.connect(self._set_value)
self.valueChanged.connect(self._set_text)
def __init__(self, window, grid, name, plugin_id, address):
# Save the window data.
self.address = address
self.name = name
self.plugin_id = plugin_id
# Initialize this class.
super(PluginSwitch, self).__init__()
# Initialize a UDP socket for this plugin.
self.udp_socket = socket(AF_INET, SOCK_DGRAM)
# Set socket options.
self.udp_socket.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
self.udp_socket.settimeout(WV_REQ_TIMEOUT)
# Initialize a timer to query data for this plugin.
self.timer = QTimer()
self.timer.timeout.connect(self.refresh)
# Initialize update thread.
self.refresh_thread = SwitchRefreshThread(self.plugin_id, self.address,
self.udp_socket)
self.refresh_thread.start()
# Connect the data signal.
self.refresh_thread.data_signal.connect(self.do_update)
# Initialize UI for this plugin.
self.PluginName = QtWidgets.QLabel(window)
self.PluginName.setText(name)
grid.addWidget(self.PluginName, grid.rowCount(), 0)
RefreshSpacer = QtWidgets.QSpacerItem(65535, 20,
QtWidgets.QSizePolicy.Maximum,
QtWidgets.QSizePolicy.Minimum)
grid.addItem(RefreshSpacer, (grid.rowCount() - 1), 1)
self.RefreshLable = QtWidgets.QLabel(window)
self.RefreshLable.setText("Refresh Time (ms) :")
grid.addWidget(self.RefreshLable, (grid.rowCount() - 1), 2)
self.Refresh = QtWidgets.QLineEdit(window)
self.Refresh.setValidator(QDoubleValidator(0, 999999, 2))
self.Refresh.setMinimumWidth(50)
self.Refresh.textChanged.connect(self.refersh_time_updated)
self.Refresh.setText('500')
grid.addWidget(self.Refresh, (grid.rowCount() - 1), 3)
self.StateLable = QtWidgets.QLabel(window)
self.StateLable.setText("Current State :")
grid.addWidget(self.StateLable, grid.rowCount(), 0)
self.State = QtWidgets.QLabel(window)
self.State.setText("?")
grid.addWidget(self.State, (grid.rowCount() - 1), 1)
self.StateOn = QtWidgets.QPushButton(window)
self.StateOn.setText("On")
self.StateOn.clicked.connect(self.set_on)
grid.addWidget(self.StateOn, (grid.rowCount() - 1), 2)
self.StateOff = QtWidgets.QPushButton(window)
self.StateOff.setText("Off")
self.StateOff.clicked.connect(self.set_off)
grid.addWidget(self.StateOff, (grid.rowCount() - 1), 3)
def __init__(self, window, grid, name, plugin_id, address):
# Save the window data.
self.address = address
self.name = name
self.plugin_id = plugin_id
# Initialize this class.
super(PluginAnalog, self).__init__()
# Initialize a UDP socket for this plugin.
self.udp_socket = socket(AF_INET, SOCK_DGRAM)
# Set socket options.
self.udp_socket.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
self.udp_socket.settimeout(WV_REQ_TIMEOUT)
# Initialize a timer to query data for this plugin.
self.timer = QTimer()
self.timer.timeout.connect(self.refresh)
# Initialize update thread.
self.refresh_thread = AnalogRefreshThread(self.plugin_id, self.address,
self.udp_socket)
self.refresh_thread.start()
# Connect the data signal.
self.refresh_thread.data_signal.connect(self.do_update)
# Initialize UI for this plugin.
self.PluginName = QtWidgets.QLabel(window)
self.PluginName.setText(name)
grid.addWidget(self.PluginName, grid.rowCount(), 0)
RefreshSpacer = QtWidgets.QSpacerItem(65535, 20,
QtWidgets.QSizePolicy.Maximum,
QtWidgets.QSizePolicy.Minimum)
grid.addItem(RefreshSpacer, (grid.rowCount() - 1), 1)
self.RefreshLable = QtWidgets.QLabel(window)
self.RefreshLable.setText("Refresh Time (ms) :")
grid.addWidget(self.RefreshLable, (grid.rowCount() - 1), 2)
self.Refresh = QtWidgets.QLineEdit(window)
self.Refresh.setValidator(QDoubleValidator(0, 999999, 2))
self.Refresh.setMinimumWidth(50)
self.Refresh.textChanged.connect(self.refersh_time_updated)
self.Refresh.setText('500')
grid.addWidget(self.Refresh, (grid.rowCount() - 1), 3)
self.AnalogDial = QtWidgets.QDial(window)
self.AnalogDial.setNotchesVisible(True)
self.AnalogDial.setEnabled(False)
grid.addWidget(self.AnalogDial, grid.rowCount(), 2, 5, 1)
self.AnalogMaxLable = QtWidgets.QLabel(window)
self.AnalogMaxLable.setText("Max Value :")
grid.addWidget(self.AnalogMaxLable, (grid.rowCount() - 2), 0)
self.AnalogMax = QtWidgets.QLabel(window)
self.AnalogMax.setText("?")
grid.addWidget(self.AnalogMax, (grid.rowCount() - 2), 1)
self.AnalogCurrentLable = QtWidgets.QLabel(window)
self.AnalogCurrentLable.setText("Current Value :")
grid.addWidget(self.AnalogCurrentLable, (grid.rowCount() - 1), 0)
self.AnalogCurrent = QtWidgets.QLabel(window)
self.AnalogCurrent.setText("?")
grid.addWidget(self.AnalogCurrent, (grid.rowCount() - 1), 1)
class CoordinatorDockWidget(QtWidgets.QDockWidget, FORM_CLASS):
SectionInput = 1
SectionOutput = 2
SectionBoth = 3
SideRight = 1
SideLeft = 2
SideBoth = 3
closingPlugin = pyqtSignal()
inputChanged = pyqtSignal()
mapConnectionChanged = pyqtSignal(int, bool)
def __init__(self, parent=None):
"""Constructor."""
super(CoordinatorDockWidget, self).__init__(parent)
# Set up the user interface from Designer.
# After setupUI you can access any designer object by doing
# self.<objectname>, and you can use autoconnect slots - see
# http://qt-project.org/doc/qt-4.8/designer-using-a-ui-file.html
# #widgets-and-dialogs-with-auto-connect
self.decDegreeValidator = QDoubleValidator(0.0, 180.0, 8, parent=self)
self.decDegreeValidator.setNotation(QDoubleValidator.StandardNotation)
self.projectedValidator = QDoubleValidator(-999999999.0,
999999999.0,
4,
parent=self)
self._eastingLeftNorthingRight = True
self._eastingInverted = False
self._northingInverted = False
self.sectionIsGeographic = {
CoordinatorDockWidget.SectionInput: True,
CoordinatorDockWidget.SectionOutput: True
}
self.setupUi(self)
# setup some lists of the input for easier access later
self._widgetlistInputDms = [
self.inLeft, self.inRight, self.inLeftSec, self.inRightSec,
self.inLeftMin, self.inRightMin
]
self._widgetlistInput = self._widgetlistInputDms + [
self.inLeftDec, self.inRightDec
]
self.resetInterface()
self.setupInternal()
# need to init that after setupUi because of message icon label size
messageIconWidgetSize = self.messageIcon.size()
messageIconSize = QSize(messageIconWidgetSize.width() - 2,
messageIconWidgetSize.height() - 2)
self.warningPixmap = QIcon(
':/plugins/coordinator/icons/warning.svg').pixmap(messageIconSize)
self.messageHideTimer = QTimer(parent=self)
self.messageHideTimer.setSingleShot(True)
self.messageHideTimer.timeout.connect(self.hideMessages)
def setupInternal(self):
self.leftDecimal.hide()
self.rightDecimal.hide()
self.leftDmsDisplay = DmsHandler(self.inLeft, self.inLeftMin,
self.inLeftSec, 180)
self.leftDmsDisplay.inputDidChange.connect(
self.__inputFieldsChangedInternal)
self.rightDmsDisplay = DmsHandler(self.inRight, self.inRightMin,
self.inRightSec, 90)
self.rightDmsDisplay.inputDidChange.connect(
self.__inputFieldsChangedInternal)
for dirButton in [self.leftDirButton, self.rightDirButton]:
# see https://stackoverflow.com/questions/4578861/connecting-slots-and-signals-in-pyqt4-in-a-loop
dirButton.clicked.connect(
partial(self.toggleCardinalDirectionButton, dirButton))
for inputField in self._widgetlistInputDms:
inputField.installEventFilter(self)
for inputField in [self.inLeftDec, self.inRightDec]:
inputField.textEdited.connect(self.__inputFieldsChangedInternal)
inputField.setValidator(self.decDegreeValidator)
inputField.installEventFilter(self)
self.leftDecIncrementor = ValueIncrementor(self.inLeftDec, 180, -180)
self.rightDecIncrementor = ValueIncrementor(self.inLeftDec, 90, -90)
self.outputCrsConn.clicked.connect(
partial(self.toggledMapConnection,
CoordinatorDockWidget.SectionOutput))
self.copyLeft.clicked.connect(
partial(self.copyResultToClipBoard,
CoordinatorDockWidget.SideLeft))
self.copyRight.clicked.connect(
partial(self.copyResultToClipBoard,
CoordinatorDockWidget.SideRight))
self.copyResultComplete.clicked.connect(
partial(self.copyResultToClipBoard,
CoordinatorDockWidget.SideBoth))
self.clearInput.clicked.connect(
partial(self.resetInterface, self.SectionBoth))
self.showHelp.clicked.connect(self.showHelpButtonClicked)
def _setToolsEnabled(self, enabled, section=None):
if (section == None): section = self.SectionBoth
if (section & self.SectionInput):
self.moveCanvas.setEnabled(enabled)
if (section & self.SectionOutput):
for widget in [
self.copyResultComplete, self.copyLeft, self.copyRight
]:
widget.setEnabled(enabled)
def resetInterface(self, section=None):
if section == None: section = self.SectionBoth
self.clearSection(section)
self._setToolsEnabled(False, section)
def eventFilter(self, obj, event):
if (type(event) == QKeyEvent and event.type() == QEvent.KeyRelease):
key = event.key()
if (self.sectionIsGeographic[self.SectionInput]
and event.text() == "-"):
# maybe we should switch the hemisphere?
if (obj in [
self.inLeft, self.inLeftDec, self.inLeftMin,
self.inLeftSec
]):
self.toggleCardinalDirectionButton(self.leftDirButton)
else:
self.toggleCardinalDirectionButton(self.rightDirButton)
elif (key in [Qt.Key_Return, Qt.Key_Enter]):
if (self.addFeatureButton.isEnabled()):
#coordinatorLog("Clicking add Feature Button")
self.addFeatureButton.click()
#coordinatorLog("Yakub Key Event (Filter): %s (%s)" % (event.key(), event.text()) )
return super(CoordinatorDockWidget, self).eventFilter(obj, event)
def __styleInputStyleSelectorForGeographicCrs(self, isGeographic):
for widget in [self.geoLabel, self.inputAsDMS, self.inputAsDec]:
widget.setEnabled(isGeographic)
def setSectionIsGeographic(self, section, isGeographic):
if (section & self.SectionInput):
# switch validators for the decimal field, as we may support different ranges
# switch to DMS view accordingly
if isGeographic:
self.inLeftDec.setValidator(self.decDegreeValidator)
self.inRightDec.setValidator(self.decDegreeValidator)
# switch to DMS view if it is selected
self.setInputToDMS(self.inputAsDMS.isChecked())
else:
self.inLeftDec.setValidator(self.projectedValidator)
self.inRightDec.setValidator(self.projectedValidator)
self.setInputToDMS(False)
for widget in [
self.labelDecDegreeLeft, self.labelDecDegreeRight,
self.leftDirButton, self.rightDirButton
]:
widget.show() if isGeographic else widget.hide()
self.__styleInputStyleSelectorForGeographicCrs(isGeographic)
if (section & self.SectionOutput):
for widget in [self.resultAsDMS, self.resultAsDec]:
widget.setEnabled(isGeographic)
self.sectionIsGeographic[section] = isGeographic
def setSectionCrs(self, section, crs):
#QgsMessageLog.logMessage("set SectionCrs, is Geographic: %s" % crs.isGeographic(), "Coordinator")
self.setSectionIsGeographic(section, crs.isGeographic())
if (section == self.SectionInput):
self.selectCrsButton.setText(crs.authid())
elif (section == self.SectionOutput):
self.outputCrs.setText(crs.authid())
def setInputToDMS(self, isDms):
if isDms:
self.leftDMS.show()
self.rightDMS.show()
self.leftDecimal.hide()
self.rightDecimal.hide()
else:
self.leftDMS.hide()
self.rightDMS.hide()
self.leftDecimal.show()
self.rightDecimal.show()
def setInputPoint(self, point):
#QgsMessageLog.logMessage("%s/%s" % (point.x(), point.y()))
if self.sectionIsGeographic[self.SectionInput]:
precision = 9
# remove leading minus when setting decimal fields. The correct state for
# the hemisphere buttons is applied in setDmsInputFromDecimal() later.
xDec = abs(point.x())
yDec = abs(point.y())
else:
precision = 3
xDec = point.x()
yDec = point.y()
self.inLeftDec.setText(QLocale().toString(
xDec if self._eastingLeftNorthingRight else yDec, "f", precision))
self.inRightDec.setText(QLocale().toString(
yDec if self._eastingLeftNorthingRight else xDec, "f", precision))
self.setDmsInputFromDecimal(point.x(), point.y())
self.__inputFieldsChangedInternal()
def setDmsInputFromDecimal(self, x, y, setEastingNorthingInversion=True):
xDMS = coordinatorDecimalToDms(x)
yDMS = coordinatorDecimalToDms(y)
#QgsMessageLog.logMessage(str(xDMS))
if (setEastingNorthingInversion):
self.setEastingInverted(xDMS[0])
self.setNorthingInverted(yDMS[0])
leftDMS = xDMS if self._eastingLeftNorthingRight else yDMS
rightDMS = yDMS if self._eastingLeftNorthingRight else xDMS
self.inLeft.setText(QLocale().toString(leftDMS[1]))
self.inLeftMin.setText(QLocale().toString(leftDMS[2]))
self.inLeftSec.setText(QLocale().toString(leftDMS[3], "f", 2))
self.inRight.setText(QLocale().toString(rightDMS[1]))
self.inRightMin.setText(QLocale().toString(rightDMS[2]))
self.inRightSec.setText(QLocale().toString(rightDMS[3], "f", 2))
def setResultPoint(self, point):
if self.sectionIsGeographic[CoordinatorDockWidget.SectionOutput]:
if (self.resultAsDec.isChecked()):
f = QgsCoordinateFormatter.FormatDecimalDegrees
precision = 9
else:
f = QgsCoordinateFormatter.FormatDegreesMinutesSeconds
precision = 3
transformedX = QgsCoordinateFormatter.formatX(
point.x(), f, precision)
transformedY = QgsCoordinateFormatter.formatY(
point.y(), f, precision)
# if we use FormatDecimalDegrees QgsCoordinateFormatter produces
# a string just with a QString::number(). Therefore the string is NOT
# localized. But QgsCoordinateFormatter provides coordinate wrapping already
# so we just hack the correct decimal sign into the string and should be
# fine... juuust fine!
decPoint = QLocale().decimalPoint()
#coordinatorLog("Decimal Point: %s" % decPoint)
if (decPoint != "."):
#coordinatorLog("replace!!")
transformedX = transformedX.replace(".", decPoint)
transformedY = transformedY.replace(".", decPoint)
else:
#self.log(" -> using decimal output")
transformedX = QLocale().toString(point.x(), 'f', 2)
transformedY = QLocale().toString(point.y(), 'f', 2)
self.setResult(transformedX, transformedY)
def setResult(self, x, y):
if (self._eastingLeftNorthingRight):
self.resultLeft.setText(x)
self.resultRight.setText(y)
else:
self.resultLeft.setText(y)
self.resultRight.setText(x)
def setWarningMessage(self, message):
if (message and len(message) > 0):
self.messageIcon.setPixmap(self.warningPixmap)
self.messageIcon.show()
self.messageText.setText(message)
else:
self.hideMessages()
def showInfoMessage(self, message, hideAfterMilliseconds=None):
self.messageIcon.clear()
self.messageText.setText(message)
if (hideAfterMilliseconds):
self.messageHideTimer.setInterval(hideAfterMilliseconds)
self.messageHideTimer.start()
def hideMessages(self):
self.messageIcon.clear()
self.messageIcon.hide()
self.messageText.clear()
def clearFieldsInSection(self, section):
if (section & self.SectionInput):
for inputField in self._widgetlistInput:
inputField.setText("")
if (section & self.SectionOutput):
for inputField in [
self.resultRight,
self.resultLeft,
]:
inputField.setText("")
def clearSection(self, section):
self.clearFieldsInSection(section)
# the following code will also reset
# the buttons designating the hemisphere:
#if (section & self.SectionInput ) :
# self.setEastingInverted(False)
# self.setNorthingInverted(False)
self.addFeatureButton.setEnabled(False)
self.inputChanged.emit()
def calculateDecimalDegreesFromDMS(self):
#QgsMessageLog.logMessage("calc DMS", "Coordinator")
valueLeft = coordinatorDmsStringsToDecimal(self.inLeft.text(),
self.inLeftMin.text(),
self.inLeftSec.text())
valueRight = coordinatorDmsStringsToDecimal(self.inRight.text(),
self.inRightMin.text(),
self.inRightSec.text())
return (valueLeft, valueRight)
def hasInput(self):
if self.leftDMS.isVisible():
hasInput = False
for field in self._widgetlistInputDms:
if len(field.text()) > 0:
hasInput = True
break
else:
hasInput = (len(self.inLeftDec.text()) > 0
or len(self.inRightDec.text()) > 0)
return hasInput
def __rawInputCoordinates(self):
if (self.leftDMS.isVisible()):
return (self.calculateDecimalDegreesFromDMS())
else:
valueLeft = 0.0
valueRight = 0.0
if (len(self.inLeftDec.text())):
valueLeft = QLocale().toFloat(self.inLeftDec.text())[0]
if (len(self.inRightDec.text())):
valueRight = QLocale().toFloat(self.inRightDec.text())[0]
return (valueLeft, valueRight)
def inputCoordinates(self):
(valueLeft, valueRight) = self.__rawInputCoordinates()
if (self._eastingLeftNorthingRight):
inX = valueLeft
inY = valueRight
else:
inX = valueRight
inY = valueLeft
if (self.sectionIsGeographic[self.SectionInput]
and self._eastingInverted):
inX *= -1
if (self.sectionIsGeographic[self.SectionInput]
and self._northingInverted):
inY *= -1
return (inX, inY)
def setNorthingInverted(self, northingInverted):
self._northingInverted = northingInverted
label = self.tr("S", "lblSouth") if northingInverted else self.tr(
"N", "lblNorth")
if (self._eastingLeftNorthingRight):
self.rightDirButton.setText(label)
else:
self.leftDirButton.setText(label)
def setEastingInverted(self, eastingInverted):
self._eastingInverted = eastingInverted
label = self.tr("W", "lblWest") if eastingInverted else self.tr(
"E", "lblEast")
if (self._eastingLeftNorthingRight):
self.leftDirButton.setText(label)
else:
self.rightDirButton.setText(label)
def toggleCardinalDirectionButton(self, button):
if (self._eastingLeftNorthingRight):
toggleEasting = (button == self.leftDirButton)
else:
toggleEasting = (button == self.rightDirButton)
if (toggleEasting):
self.setEastingInverted(not self._eastingInverted)
else:
self.setNorthingInverted(not self._northingInverted)
self.inputChanged.emit()
def toggledMapConnection(self, section, isConnected):
if section == CoordinatorDockWidget.SectionOutput:
self.outputCrs.setEnabled(not isConnected)
self.mapConnectionChanged.emit(section, isConnected)
def __inputFieldsChangedInternal(self):
#coordinatorLog("fields changed internal triggered")
self._setToolsEnabled(self.hasInput())
if (self.hasInput()):
if (self.leftDMS.isVisible()):
(leftValue, rightValue) = self.calculateDecimalDegreesFromDMS()
self.inLeftDec.setText(QLocale().toString(leftValue, "f", 9))
self.inRightDec.setText(QLocale().toString(rightValue, "f", 9))
else:
# calculate DMS Values
leftValue = QLocale().toFloat(self.inLeftDec.text())[0]
rightValue = QLocale().toFloat(self.inRightDec.text())[0]
x = leftValue if self._eastingLeftNorthingRight else rightValue
y = rightValue if self._eastingLeftNorthingRight else leftValue
self.setDmsInputFromDecimal(x, y, False)
else:
if (self.leftDMS.isVisible()):
self.inLeftDec.setText(None)
self.inRightDec.setText(None)
else:
for f in self._widgetlistInputDms:
f.setText(None)
self.inputChanged.emit()
def copyResultToClipBoard(self, which):
cb = QApplication.clipboard()
cb.clear(mode=cb.Clipboard)
if which == CoordinatorDockWidget.SideLeft:
content = self.resultLeft.text()
elif which == CoordinatorDockWidget.SideRight:
content = self.resultRight.text()
else:
content = "%s\t%s" % (self.resultLeft.text(),
self.resultRight.text())
cb.setText(content, mode=cb.Clipboard)
def showHelpButtonClicked(self):
if not hasattr(self, "helpview"):
helpBasepath = "%s/help" % os.path.normpath(
os.path.dirname(__file__))
helpUrl = QUrl(
pathlib.Path("%s/index.html" % helpBasepath).as_uri())
cssUrl = QUrl(pathlib.Path("%s/help.css" % helpBasepath).as_uri())
self.helpview = QWebView()
self.helpview.settings().setUserStyleSheetUrl(cssUrl)
self.helpview.load(helpUrl)
self.helpview.show()
def closeEvent(self, event):
self.closingPlugin.emit()
event.accept()
def generate_inputs(self):
if self.txtOrigenes.text() == '' or self.txtDestinos.text() == '':
self.n_destinos = 0
self.n_origenes = 0
else:
self.n_origenes = int(self.txtOrigenes.text()) + 2
self.n_destinos = int(self.txtDestinos.text()) + 2
i = 1
for origen in range(self.n_origenes):
for destino in range(self.n_destinos):
if origen == 0 and destino == 0:
label = QLabel("Origen\\Destino")
self.gridData.addWidget(label, origen, destino)
elif origen == 0 and destino != self.n_destinos - 1:
input_ = QLineEdit()
input_.setPlaceholderText("Destino " + str(destino))
self.gridData.addWidget(input_, origen, destino)
elif origen == 0 and destino == self.n_destinos - 1:
label = QLabel("Oferta")
self.gridData.addWidget(label, origen, destino)
elif origen != self.n_origenes - 1 and destino == 0:
input_ = QLineEdit()
input_.setPlaceholderText("Origen " + str(origen))
self.gridData.addWidget(input_, origen, destino)
elif origen == self.n_origenes - 1 and destino == 0:
label = QLabel("Demanda")
self.gridData.addWidget(label, origen, destino)
elif origen == self.n_origenes - 1 and destino < self.n_destinos - 1:
input_ = QLineEdit()
input_.setValidator(QDoubleValidator())
input_.setPlaceholderText("Demanda " + str(destino))
self.gridData.addWidget(input_, origen, destino)
elif origen > 0 and origen < self.n_origenes - 1 and destino == self.n_destinos - 1:
input_ = QLineEdit()
input_.setValidator(QDoubleValidator())
input_.setPlaceholderText("Oferta " + str(origen))
self.gridData.addWidget(input_, origen, destino)
elif origen > 0 and origen < self.n_origenes - 1 and destino > 0 and destino < self.n_destinos - 1:
input_ = QLineEdit()
input_.setValidator(QDoubleValidator())
input_.setPlaceholderText("costo " + str(i))
self.gridData.addWidget(input_, origen, destino)
i += 1
class DmsHandler(QObject):
inputDidChange = pyqtSignal()
def __init__(self, degField, minField, secField, maxDegrees):
super(DmsHandler, self).__init__()
# init validators:
self.intDegValidator = QIntValidator(0, maxDegrees, parent=self)
self.minValidator = QIntValidator(0, 59, parent=self)
self.secValidator = QDoubleValidator(0.0, 59.999, 3, parent=self)
self.secValidator.setNotation(QDoubleValidator.StandardNotation)
self._degField = degField
self._minField = minField
self._secField = secField
self._maxDegrees = maxDegrees
self._degFieldIncrementor = ValueIncrementor(self._degField,
maxDegrees,
doOverflow=False)
self._degFieldIncrementor.fieldDidOverflow.connect(
self.fieldDidOverflow)
self._degField.setValidator(self.intDegValidator)
self._degField.textEdited.connect(self.inputDidChange.emit)
self._minFieldIncrementor = ValueIncrementor(
self._minField, 59, wrapCallback=self.isWrapAllowedFor)
self._minFieldIncrementor.fieldDidOverflow.connect(
self.fieldDidOverflow)
self._minField.setValidator(self.minValidator)
self._minField.textChanged.connect(
partial(self.minorFieldDidChange, self._minField))
self._secFieldIncrementor = ValueIncrementor(
self._secField, 59, wrapCallback=self.isWrapAllowedFor)
self._secFieldIncrementor.fieldDidOverflow.connect(
self.fieldDidOverflow)
self._secField.setValidator(self.secValidator)
self._secField.textChanged.connect(
partial(self.minorFieldDidChange, self._secField))
def fieldDidOverflow(self, field, overflow):
if field == self._minField:
self._degFieldIncrementor.doStepwiseIncrement(overflow)
elif field == self._secField:
self._minFieldIncrementor.doStepwiseIncrement(overflow)
def minorFieldDidChange(self, field):
degrees = QLocale().toInt(self._degField.text())[0]
if degrees == self._maxDegrees:
field.setText("0")
self.inputDidChange.emit()
def isWrapAllowedFor(self, field, direction):
if (field == self._minField):
degrees = QLocale().toInt(self._degField.text())[0]
res = degrees + direction
return 0 <= res <= self._maxDegrees
elif (field == self._secField):
minutes = QLocale().toInt(self._minField.text())[0]
res = minutes + direction
if not (0 <= res < 60):
return self.isWrapAllowedFor(self._minField, direction)
else:
return True
elif (field == self._degField):
degrees = QLocale().toInt(self._degField.text())[0]
res = degrees + direction
return 0 <= res <= self._maxDegrees
return True
def __init__(self, parent, modal=True, flags=Qt.WindowFlags()):
QDialog.__init__(self, parent, flags)
self.model = None
self.setModal(modal)
self.setWindowTitle("Restore model into image")
lo = QVBoxLayout(self)
lo.setContentsMargins(10, 10, 10, 10)
lo.setSpacing(5)
# file selector
self.wfile_in = FileSelector(self,
label="Input FITS file:",
dialog_label="Input FITS file",
default_suffix="fits",
file_types="FITS files (*.fits *.FITS)",
file_mode=QFileDialog.ExistingFile)
lo.addWidget(self.wfile_in)
self.wfile_out = FileSelector(self,
label="Output FITS file:",
dialog_label="Output FITS file",
default_suffix="fits",
file_types="FITS files (*.fits *.FITS)",
file_mode=QFileDialog.AnyFile)
lo.addWidget(self.wfile_out)
# beam size
lo1 = QHBoxLayout()
lo.addLayout(lo1)
lo1.setContentsMargins(0, 0, 0, 0)
lo1.addWidget(QLabel("Restoring beam FWHM, major axis:", self))
self.wbmaj = QLineEdit(self)
lo1.addWidget(self.wbmaj)
lo1.addWidget(QLabel("\" minor axis:", self))
self.wbmin = QLineEdit(self)
lo1.addWidget(self.wbmin)
lo1.addWidget(QLabel("\" P.A.:", self))
self.wbpa = QLineEdit(self)
lo1.addWidget(self.wbpa)
lo1.addWidget(QLabel("\u00B0", self))
for w in self.wbmaj, self.wbmin, self.wbpa:
w.setValidator(QDoubleValidator(self))
lo1 = QHBoxLayout()
lo.addLayout(lo1)
lo1.setContentsMargins(0, 0, 0, 0)
self.wfile_psf = FileSelector(
self,
label="Set restoring beam by fitting PSF image:",
dialog_label="PSF FITS file",
default_suffix="fits",
file_types="FITS files (*.fits *.FITS)",
file_mode=QFileDialog.ExistingFile)
lo1.addSpacing(32)
lo1.addWidget(self.wfile_psf)
# selection only
self.wselonly = QCheckBox("restore selected model sources only", self)
lo.addWidget(self.wselonly)
# OK/cancel buttons
lo.addSpacing(10)
lo2 = QHBoxLayout()
lo.addLayout(lo2)
lo2.setContentsMargins(0, 0, 0, 0)
lo2.setContentsMargins(5, 5, 5, 5)
self.wokbtn = QPushButton("OK", self)
self.wokbtn.setMinimumWidth(128)
self.wokbtn.clicked.connect(self.accept)
self.wokbtn.setEnabled(False)
cancelbtn = QPushButton("Cancel", self)
cancelbtn.setMinimumWidth(128)
cancelbtn.clicked.connect(self.reject)
lo2.addWidget(self.wokbtn)
lo2.addStretch(1)
lo2.addWidget(cancelbtn)
self.setMinimumWidth(384)
# signals
self.wfile_in.filenameSelected.connect(self._fileSelected)
self.wfile_in.filenameSelected.connect(self._inputFileSelected)
self.wfile_out.filenameSelected.connect(self._fileSelected)
self.wfile_psf.filenameSelected.connect(self._psfFileSelected)
# internal state
self.qerrmsg = QErrorMessage(self)
def __init__(self):
super().__init__()
self.setAlignment(Qt.AlignRight)
self.setValidator(QDoubleValidator())
def __init__(self):
QWidget.__init__(self)
self.main_layout = QVBoxLayout()
self.l = QFormLayout()
self.l2 = QHBoxLayout()
self.l3 = QHBoxLayout()
self.group_box = QGroupBox('Ustawienia ogólne')
self.group_box2 = QGroupBox('Pobieraj metadane')
self.group_box3 = QGroupBox(
'Pobieraj dodatkowe metadane i dołącz je do komentarza')
# general settings
self.max_results_label = QLabel('Maksymalna liczba wyników')
self.max_results_label.setToolTip(
'Maksymalna liczba pobieranych metadanych. Dla książek o nieunikalnych tytułach \
pierwszy wynik może być niepoprawny')
self.max_results = QLineEdit(self)
self.max_results.setValidator(QIntValidator())
self.max_results.setText(str(PREFS['max_results']))
self.max_results_label.setBuddy(self.max_results)
self.l.addRow(self.max_results_label, self.max_results)
self.authors_search_label = QLabel('Używaj autorów do wyszukiwań')
self.authors_search_label.setToolTip(
'Wyszukuj uwzględniając autorów. Może poprawić trafność wyników, ale błędni autorzy spowodują brak wyników'
)
self.authors_search = QCheckBox()
self.authors_search.setChecked(PREFS['authors_search'])
self.authors_search_label.setBuddy(self.authors_search)
self.l.addRow(self.authors_search_label, self.authors_search)
self.only_first_author_label = QLabel(
'Używaj tylko pierwszego autora do wyszukiwania')
self.only_first_author_label.setToolTip(
'Używaj tylko pierwszego autora do wyszukiwań, obowiązuje tylko gdy wyszukiwanie z autorami jest aktywowane'
)
self.only_first_author = QCheckBox()
self.only_first_author.setChecked(PREFS['only_first_author'])
self.only_first_author_label.setBuddy(self.only_first_author)
self.l.addRow(self.only_first_author_label, self.only_first_author)
self.covers_label = QLabel('Pobieraj okładki')
self.covers = QCheckBox()
self.covers.setChecked(PREFS['covers'])
self.covers_label.setBuddy(self.covers)
self.l.addRow(self.covers_label, self.covers)
self.max_covers_label = QLabel('Maksymalna liczba okładek')
self.max_covers_label.setToolTip(
'Maksymalna liczba pobieranych okładek')
self.max_covers = QLineEdit(self)
self.max_covers.setValidator(QIntValidator())
self.max_covers.setText(str(PREFS['max_covers']))
self.max_covers_label.setBuddy(self.max_covers)
self.l.addRow(self.max_covers_label, self.max_covers)
self.threads_label = QLabel('Wielowątkowe przetwarzanie')
self.threads_label.setToolTip(
'Przyśpiesza pracę używając wielu wątków')
self.threads = QCheckBox()
self.threads.setChecked(PREFS['threads'])
self.threads_label.setBuddy(self.threads)
self.l.addRow(self.threads_label, self.threads)
self.max_threads_label = QLabel('Maksymalna liczba wątków')
self.max_threads = QLineEdit(self)
self.max_threads.setValidator(QIntValidator())
self.max_threads.setText(str(PREFS['max_threads']))
self.max_threads_label.setBuddy(self.max_threads)
self.l.addRow(self.max_threads_label, self.max_threads)
self.thread_delay_label = QLabel('Opóźnienie wątku')
self.thread_delay_label.setToolTip(
'Czas oczekiwania na uruchomienie kolejnego wątku')
self.thread_delay = QLineEdit(self)
self.thread_delay.setValidator(QDoubleValidator())
self.thread_delay.setText(str(PREFS['thread_delay']))
self.thread_delay_label.setBuddy(self.thread_delay)
self.l.addRow(self.thread_delay_label, self.thread_delay)
# metadata settings
if 'title' in PREFS.defaults:
self.title = QCheckBox('Tytuł')
self.title.setChecked(PREFS['title'])
self.l2.addWidget(self.title)
if 'authors' in PREFS.defaults:
self.authors = QCheckBox('Autorzy')
self.authors.setChecked(PREFS['authors'])
self.l2.addWidget(self.authors)
if 'pubdate' in PREFS.defaults:
self.pubdate = QCheckBox('Data wydania')
self.pubdate.setChecked(PREFS['pubdate'])
self.l2.addWidget(self.pubdate)
if 'publisher' in PREFS.defaults:
self.publisher = QCheckBox('Wydawca')
self.publisher.setChecked(PREFS['publisher'])
self.l2.addWidget(self.publisher)
if 'isbn' in PREFS.defaults:
self.isbn = QCheckBox('ISBN')
self.isbn.setChecked(PREFS['isbn'])
self.l2.addWidget(self.isbn)
if 'comments' in PREFS.defaults:
self.comments = QCheckBox('Opis')
self.comments.setChecked(PREFS['comments'])
self.l2.addWidget(self.comments)
if 'languages' in PREFS.defaults:
self.languages = QCheckBox('Języki')
self.languages.setChecked(PREFS['languages'])
self.l2.addWidget(self.languages)
if 'rating' in PREFS.defaults:
self.rating = QCheckBox('Ocena')
self.rating.setChecked(PREFS['rating'])
self.l2.addWidget(self.rating)
if 'tags' in PREFS.defaults:
self.tags = QCheckBox('Etykiety (tagi)')
self.tags.setChecked(PREFS['tags'])
self.l2.addWidget(self.tags)
if 'series' in PREFS.defaults:
self.series = QCheckBox('Cykle')
self.series.setChecked(PREFS['series'])
self.l2.addWidget(self.series)
if 'identifier' in PREFS.defaults:
self.identifier = QCheckBox('Identyfikator')
self.identifier.setChecked(PREFS['identifier'])
self.l2.addWidget(self.identifier)
# custom metadata
if 'translators' in PREFS.defaults:
self.translators = QCheckBox('Tłumaczenie')
self.translators.setChecked(PREFS['translators'])
self.l3.addWidget(self.translators)
if 'original_title' in PREFS.defaults:
self.original_title = QCheckBox('Tytuł oryginału')
self.original_title.setChecked(PREFS['original_title'])
self.l3.addWidget(self.original_title)
if 'categories' in PREFS.defaults:
self.categories = QCheckBox('Kategorie')
self.categories.setChecked(PREFS['categories'])
self.l3.addWidget(self.categories)
if 'genres' in PREFS.defaults:
self.genres = QCheckBox('Gatunki')
self.genres.setChecked(PREFS['genres'])
self.l3.addWidget(self.genres)
self.group_box.setLayout(self.l)
self.group_box2.setLayout(self.l2)
self.group_box3.setLayout(self.l3)
self.main_layout.addWidget(self.group_box)
self.main_layout.addWidget(self.group_box2)
self.main_layout.addWidget(self.group_box3)
self.main_layout.setAlignment(Qt.AlignTop)
self.setLayout(self.main_layout)
