def jobTask(self):
linkState = 0
if exists("/sys/class/net/wlan0/operstate"):
linkState = fileReadLine("/sys/class/net/wlan0/operstate")
if linkState != "down":
linkState = fileReadLine("/sys/class/net/wlan0/carrier")
elif exists("/sys/class/net/eth0/operstate"):
linkState = fileReadLine("/sys/class/net/eth0/operstate")
if linkState != "down":
linkState = fileReadLine("/sys/class/net/eth0/carrier")
linkState = linkState[:1]
if exists("/proc/stb/lcd/symbol_network"
) and config.lcd.mode.value == "1":
fileWriteLine("/proc/stb/lcd/symbol_network", linkState)
elif exists("/proc/stb/lcd/symbol_network"
) and config.lcd.mode.value == "0":
fileWriteLine("/proc/stb/lcd/symbol_network", "0")
USBState = 0
for bus in busses():
devices = bus.devices
for dev in devices:
if dev.deviceClass != 9 and dev.deviceClass != 2 and dev.idVendor != 3034 and dev.idVendor > 0:
USBState = 1
if exists("/proc/stb/lcd/symbol_usb"):
fileWriteLine("/proc/stb/lcd/symbol_usb", USBState)
self.timer.startLongTimer(30)
def getHWSerial():
if isfile("/proc/stb/info/sn"):
hwserial = fileReadLine("/proc/stb/info/sn", "unknown", source=MODULE_NAME)
elif isfile("/proc/stb/info/serial"):
hwserial = fileReadLine("/proc/stb/info/serial", "unknown", source=MODULE_NAME)
elif isfile("/proc/stb/info/serial_number"):
hwserial = fileReadLine("/proc/stb/info/serial_number", "unknown", source=MODULE_NAME)
else:
hwserial = fileReadLine("/sys/class/dmi/id/product_serial", "unknown", source=MODULE_NAME)
return hwserial.strip()
def model(self):
if self.device[:2] == "hd":
return fileReadLine(pathjoin("/proc/ide", self.device, "model"),
_("Unknown"))
elif self.device[:2] == "sd":
vendor = fileReadLine(self.sysfsPath("device/vendor"),
_("Unknown"))
model = fileReadLine(self.sysfsPath("device/model"), _("Unknown"))
return "%s (%s)" % (vendor, model)
elif self.device.startswith("mmcblk"):
return fileReadLine(self.sysfsPath("device/name"), _("Unknown"))
print("[Harddisk] Error: Failed to get model: No hdX or sdX or mmcX!")
return "-?-"
def getSystemTemperature():
temperature = ""
if isfile("/proc/stb/sensors/temp0/value"):
temperature = fileReadLine("/proc/stb/sensors/temp0/value",
source=MODULE_NAME)
elif isfile("/proc/stb/sensors/temp/value"):
temperature = fileReadLine("/proc/stb/sensors/temp/value",
source=MODULE_NAME)
elif isfile("/proc/stb/fp/temp_sensor"):
temperature = fileReadLine("/proc/stb/fp/temp_sensor",
source=MODULE_NAME)
if temperature:
return "%s%s C" % (temperature, u"\u00B0")
return temperature
def getUserfriendlyDeviceName(self, dev, phys):
dev, part = self.splitDeviceName(dev)
description = _("External Storage %s") % dev
if exists(pathjoin("/sys", phys, "model")):
description = fileReadLine(pathjoin("/sys", phys, "model"),
_("Unknown"))
elif exists(pathjoin("/sys", phys, "name")):
description = fileReadLine(pathjoin("/sys", phys, "name"),
_("Unknown"))
else:
print("[Harddisk] Error: Couldn't read model!")
# not wholedisk and not partition 1
if part and part != 1:
description += _(" (Partition %d)") % part
return description
def getFPWasTimerWakeup(check=False):
global wasTimerWakeup
isError = False
if wasTimerWakeup is not None:
if check:
return wasTimerWakeup, isError
return wasTimerWakeup
wasTimerWakeup = fileReadLine("/proc/stb/fp/was_timer_wakeup",
source=MODULE_NAME)
if wasTimerWakeup is not None:
wasTimerWakeup = int(wasTimerWakeup) and True or False
if not fileWriteLine("/tmp/was_timer_wakeup.txt",
str(wasTimerWakeup),
source=MODULE_NAME):
try:
with open("/dev/dbox/fp0") as fd:
wasTimerWakeup = unpack('B', ioctl(
fd.fileno(), 9, ' '))[0] and True or False
except (IOError, OSError) as err:
isError = True
print(
"[StbHardware] Error %d: Unable to read '/dev/dbox/fp0', getFPWasTimerWakeup failed! (%s)"
% (err.errno, err.strerror))
else:
wasTimerWakeup = False
if wasTimerWakeup:
clearFPWasTimerWakeup() # Clear hardware status.
if check:
return wasTimerWakeup, isError
return wasTimerWakeup
def __init__(self):
print("[MultiBoot] MultiBoot is initializing.")
self.bootArgs = fileReadLine(
"/sys/firmware/devicetree/base/chosen/bootargs",
default="",
source=MODULE_NAME)
self.loadMultiBoot()
def getFPVersion():
if isfile("/proc/stb/info/micomver"):
version = fileReadLine("/proc/stb/info/micomver", "unknown", source=MODULE_NAME)
elif isfile("/proc/stb/fp/version"):
if BoxInfo.getItem("platform") == "dm4kgen" or BoxInfo.getItem("model") in ("dm520", "dm7080", "dm820"):
version = fileReadLine("/proc/stb/fp/version", "unknown", source=MODULE_NAME)
else:
version = int(fileReadLine("/proc/stb/fp/version", "0", source=MODULE_NAME))
elif isfile("/sys/firmware/devicetree/base/bolt/tag"):
version = fileReadLine("/sys/firmware/devicetree/base/bolt/tag", "unknown", source=MODULE_NAME).rstrip("\0")
else:
try:
with open("/dev/dbox/fp0") as fd:
version = ioctl(fd.fileno(), 0)
except (IOError, OSError) as err:
version = "unknown"
print("[StbHardware] Error %d: Unable to access '/dev/dbox/fp0', getFPVersion failed! (%s)" % (err.errno, err.strerror))
return version
def __init__(self, device, removable=False):
self.device = device
self.card = False
self.max_idle_time = 0
self.idle_running = False
self.last_access = time()
self.last_stat = 0
self.timer = None
self.is_sleeping = False
self.dev_path = ""
self.disk_path = ""
self.mount_path = None
self.mount_device = None
self.phys_path = realpath(self.sysfsPath("device"))
self.removable = removable
self.internal = "ide" in self.phys_path or "pci" in self.phys_path or "ahci" in self.phys_path or "sata" in self.phys_path
data = fileReadLine(pathjoin("/sys/block", device, "queue/rotational"),
"1")
self.rotational = int(data)
if BoxInfo.getItem("Udev"):
self.dev_path = "/dev/" + self.device
self.disk_path = self.dev_path
self.card = "sdhci" in self.phys_path or "mmc" in self.device
else:
tmp = fileReadLine(self.sysfsPath("dev")).split(":")
s_major = int(tmp[0])
s_minor = int(tmp[1])
for disc in listdir("/dev/discs"):
dev_path = realpath("/dev/discs/" + disc)
disk_path = dev_path + "/disc"
try:
rdev = stat(disk_path).st_rdev
except (IOError, OSError):
continue
if s_major == major(rdev) and s_minor == minor(rdev):
self.dev_path = dev_path
self.disk_path = disk_path
break
self.card = self.device[:2] == "hd" and "host0" not in self.dev_path
print("[Harddisk] New device '%s' -> '%s' -> '%s'." %
(self.device, self.dev_path, self.disk_path))
if (self.internal or not removable) and not self.card:
self.startIdle()
def getFPWakeuptime():
wakeup = fileReadLine("/proc/stb/fp/wakeup_time", source=MODULE_NAME)
if wakeup is None:
try:
with open("/dev/dbox/fp0") as fd:
wakeup = unpack('L', ioctl(fd.fileno(), 5, ' '))[0] # Get wakeup time.
except (IOError, OSError) as err:
wakeup = 0
print("[StbHardware] Error %d: Unable to read '/dev/dbox/fp0', getFPWakeuptime failed! (%s)" % (err.errno, err.strerror))
return wakeup
def __init__(self):
global hw_info
if hw_info:
return
hw_info = self
self.device_version = fileReadLine("/proc/stb/info/version", "", source=MODULE_NAME).strip()
self.device_revision = fileReadLine("/proc/stb/info/board_revision", "", source=MODULE_NAME).strip()
self.device_name = BoxInfo.getItem("model")
self.device_brandname = BoxInfo.getItem("brand")
self.device_model = BoxInfo.getItem("model")
self.device_model = self.device_model or self.device_name
self.device_hw = self.device_model
self.machine_name = self.device_model
if self.device_revision:
self.device_string = "%s (%s-%s)" % (self.device_hw, self.device_revision, self.device_version)
elif self.device_version:
self.device_string = "%s (%s)" % (self.device_hw, self.device_version)
else:
self.device_string = self.device_hw
self.device_hdmi = BoxInfo.getItem("hdmi") # Only some early DMM boxes do not have HDMI hardware.
print("[HardwareInfo] Detected: '%s'." % self.get_device_string())
def diskSize(self):
line = fileReadLine(self.sysfsPath("size"))
if line is None:
dev = self.findMount()
if dev:
try:
stat = statvfs(dev)
cap = int(stat.f_blocks * stat.f_bsize)
return cap / 1000 / 1000
except (IOError, OSError):
return 0
cap = int(line)
return cap / 1000 * 512 / 1000
def getBoxProc():
if isfile("/proc/stb/info/hwmodel"):
procmodel = fileReadLine("/proc/stb/info/hwmodel", "unknown", source=MODULE_NAME)
elif isfile("/proc/stb/info/azmodel"):
procmodel = fileReadLine("/proc/stb/info/model", "unknown", source=MODULE_NAME)
elif isfile("/proc/stb/info/gbmodel"):
procmodel = fileReadLine("/proc/stb/info/gbmodel", "unknown", source=MODULE_NAME)
elif isfile("/proc/stb/info/vumodel") and not isfile("/proc/stb/info/boxtype"):
procmodel = fileReadLine("/proc/stb/info/vumodel", "unknown", source=MODULE_NAME)
elif isfile("/proc/stb/info/boxtype") and not isfile("/proc/stb/info/vumodel"):
procmodel = fileReadLine("/proc/stb/info/boxtype", "unknown", source=MODULE_NAME)
elif isfile("/proc/boxtype"):
procmodel = fileReadLine("/proc/boxtype", "unknown", source=MODULE_NAME)
elif isfile("/proc/device-tree/model"):
procmodel = fileReadLine("/proc/device-tree/model", "unknown", source=MODULE_NAME).strip()[0:12]
elif isfile("/sys/firmware/devicetree/base/model"):
procmodel = fileReadLine("/sys/firmware/devicetree/base/model", "unknown", source=MODULE_NAME)
else:
procmodel = fileReadLine("/proc/stb/info/model", "unknown", source=MODULE_NAME)
return procmodel.strip().lower()
def getBoxUptime():
upTime = fileReadLine("/proc/uptime", source=MODULE_NAME)
if upTime is None:
return "-"
secs = int(upTime.split(".")[0])
times = []
if secs > 86400:
days = secs // 86400
secs = secs % 86400
times.append(ngettext("%d day", "%d days", days) % days)
h = secs // 3600
m = (secs % 3600) // 60
times.append(ngettext("%d hour", "%d hours", h) % h)
times.append(ngettext("%d minute", "%d minutes", m) % m)
return " ".join(times)
def getFPVersion():
version = None
try:
if getBrandOEM() == "blackbox" and isfile("/proc/stb/info/micomver"):
version = fileReadLine("/proc/stb/info/micomver", source=MODULE_NAME)
elif getBoxType() in ('dm7080', 'dm820', 'dm520', 'dm525', 'dm900', 'dm920'):
version = open("/proc/stb/fp/version", "r").read()
else:
version = int(open("/proc/stb/fp/version", "r").read())
except IOError:
try:
with open("/dev/dbox/fp0") as fd:
version = ioctl(fd.fileno(), 0)
except (IOError, OSError) as err:
print("[StbHardware] Error %d: Unable to access '/dev/dbox/fp0', getFPVersion failed! (%s)" % (err.errno, err.strerror))
return version
def getChipSetString():
if getMachineBuild() in ('dm7080', 'dm820'):
return "7435"
elif getMachineBuild() in ('dm520', 'dm525'):
return "73625"
elif getMachineBuild() in ('dm900', 'dm920', 'et13000', 'sf5008'):
return "7252S"
elif getMachineBuild() in ('hd51', 'vs1500', 'h7'):
return "7251S"
elif getMachineBuild() in ('alien5', ):
return "S905D"
else:
chipset = fileReadLine("/proc/stb/info/chipset", source=MODULE_NAME)
if chipset is None:
return _("Undefined")
return str(chipset.lower().replace('\n',
'').replace('bcm', '').replace(
'brcm', '').replace('sti', ''))
def InitLcd():
if not BoxInfo.getItem("dboxlcd"):
detected = False
else:
detected = eDBoxLCD.getInstance().detected()
BoxInfo.setItem("Display", detected)
config.lcd = ConfigSubsection()
if exists("/proc/stb/lcd/mode"):
can_lcdmodechecking = fileReadLine("/proc/stb/lcd/mode")
else:
can_lcdmodechecking = False
BoxInfo.setItem("LCDMiniTV", can_lcdmodechecking)
if detected:
ilcd = LCD()
if can_lcdmodechecking:
def setLCDModeMinitTV(configElement):
print("[Lcd] setLCDModeMinitTV='%s'." % configElement.value)
fileWriteLine("/proc/stb/lcd/mode", configElement.value)
def setMiniTVFPS(configElement):
print("[Lcd] setMiniTVFPS='%s'." % configElement.value)
fileWriteLine("/proc/stb/lcd/fps", configElement.value)
def setLCDModePiP(configElement):
pass # DEBUG: Should this be doing something?
def setLCDScreenshot(configElement):
ilcd.setScreenShot(configElement.value)
config.lcd.modepip = ConfigSelection(choices={
"0": _("Off"),
"5": _("PIP"),
"7": _("PIP with OSD")
},
default="0")
config.lcd.modepip.addNotifier(setLCDModePiP)
config.lcd.screenshot = ConfigYesNo(default=False)
config.lcd.screenshot.addNotifier(setLCDScreenshot)
config.lcd.modeminitv = ConfigSelection(choices={
"0": _("Normal"),
"1": _("MiniTV"),
"2": _("OSD"),
"3": _("MiniTV with OSD")
},
default="0")
config.lcd.fpsminitv = ConfigSlider(default=30, limits=(0, 30))
config.lcd.modeminitv.addNotifier(setLCDModeMinitTV)
config.lcd.fpsminitv.addNotifier(setMiniTVFPS)
else:
config.lcd.modeminitv = ConfigNothing()
config.lcd.screenshot = ConfigNothing()
config.lcd.fpsminitv = ConfigNothing()
config.lcd.scroll_speed = ConfigSelection(choices=[("500", _("Slow")),
("300",
_("Normal")),
("100", _("Fast"))],
default="300")
config.lcd.scroll_delay = ConfigSelection(choices=[
("10000", "10 %s" % _("seconds")), ("20000",
"20 %s" % _("seconds")),
("30000", "30 %s" % _("seconds")), ("60000", "1 %s" % _("minute")),
("300000", "5 %s" % _("minutes")), ("noscrolling", _("Off"))
],
default="10000")
def setLCDbright(configElement):
ilcd.setBright(configElement.value)
def setLCDstandbybright(configElement):
ilcd.setStandbyBright(configElement.value)
def setLCDdimbright(configElement):
ilcd.setDimBright(configElement.value)
def setLCDdimdelay(configElement):
ilcd.setDimDelay(configElement.value)
def setLCDcontrast(configElement):
ilcd.setContrast(configElement.value)
def setLCDinverted(configElement):
ilcd.setInverted(configElement.value)
def setLCDflipped(configElement):
ilcd.setFlipped(configElement.value)
def setLCDmode(configElement):
ilcd.setMode(configElement.value)
def setLCDpower(configElement):
ilcd.setPower(configElement.value)
def setfblcddisplay(configElement):
ilcd.setfblcddisplay(configElement.value)
def setLCDshowoutputresolution(configElement):
ilcd.setShowoutputresolution(configElement.value)
def setLCDminitvmode(configElement):
ilcd.setLCDMiniTVMode(configElement.value)
def setLCDminitvpipmode(configElement):
ilcd.setLCDMiniTVPIPMode(configElement.value)
def setLCDminitvfps(configElement):
ilcd.setLCDMiniTVFPS(configElement.value)
def setLEDnormalstate(configElement):
ilcd.setLEDNormalState(configElement.value)
def setLEDdeepstandby(configElement):
ilcd.setLEDDeepStandbyState(configElement.value)
def setLEDblinkingtime(configElement):
ilcd.setLEDBlinkingTime(configElement.value)
def setPowerLEDstate(configElement):
if exists("/proc/stb/power/powerled"):
fileWriteLine("/proc/stb/power/powerled", configElement.value)
def setPowerLEDstate2(configElement):
if exists("/proc/stb/power/powerled2"):
fileWriteLine("/proc/stb/power/powerled2", configElement.value)
def setPowerLEDstanbystate(configElement):
if exists("/proc/stb/power/standbyled"):
fileWriteLine("/proc/stb/power/standbyled",
configElement.value)
def setPowerLEDdeepstanbystate(configElement):
if exists("/proc/stb/power/suspendled"):
fileWriteLine("/proc/stb/power/suspendled",
configElement.value)
def setLedPowerColor(configElement):
if exists("/proc/stb/fp/ledpowercolor"):
fileWriteLine("/proc/stb/fp/ledpowercolor",
configElement.value)
def setLedStandbyColor(configElement):
if exists("/proc/stb/fp/ledstandbycolor"):
fileWriteLine("/proc/stb/fp/ledstandbycolor",
configElement.value)
def setLedSuspendColor(configElement):
if exists("/proc/stb/fp/ledsuspendledcolor"):
fileWriteLine("/proc/stb/fp/ledsuspendledcolor",
configElement.value)
def setLedBlinkControlColor(configElement):
if exists("/proc/stb/fp/led_blink"):
fileWriteLine("/proc/stb/fp/led_blink", configElement.value)
def setLedBrightnessControl(configElement):
if exists("/proc/stb/fp/led_brightness"):
fileWriteLine("/proc/stb/fp/led_brightness",
configElement.value)
def setLedColorControlColor(configElement):
if exists("/proc/stb/fp/led_color"):
fileWriteLine("/proc/stb/fp/led_color", configElement.value)
def setLedFadeControlColor(configElement):
if exists("/proc/stb/fp/led_fade"):
fileWriteLine("/proc/stb/fp/led_fade", configElement.value)
def setPower4x7On(configElement):
if exists("/proc/stb/fp/power4x7on"):
fileWriteLine("/proc/stb/fp/power4x7on", configElement.value)
def setPower4x7Standby(configElement):
if exists("/proc/stb/fp/power4x7standby"):
fileWriteLine("/proc/stb/fp/power4x7standby",
configElement.value)
def setPower4x7Suspend(configElement):
if exists("/proc/stb/fp/power4x7suspend"):
fileWriteLine("/proc/stb/fp/power4x7suspend",
configElement.value)
def setXcoreVFD(configElement):
if exists("/sys/module/brcmstb_osmega/parameters/pt6302_cgram"):
fileWriteLine(
"/sys/module/brcmstb_osmega/parameters/pt6302_cgram",
configElement.value)
config.usage.vfd_xcorevfd = ConfigSelection(choices=[
("0", _("12 character")), ("1", _("8 character"))
],
default="0")
config.usage.vfd_xcorevfd.addNotifier(setXcoreVFD)
config.usage.lcd_powerled = ConfigSelection(choices=[("off", _("Off")),
("on", _("On"))],
default="on")
config.usage.lcd_powerled.addNotifier(setPowerLEDstate)
config.usage.lcd_powerled2 = ConfigSelection(choices=[("off",
_("Off")),
("on", _("On"))],
default="on")
config.usage.lcd_powerled2.addNotifier(setPowerLEDstate2)
config.usage.lcd_standbypowerled = ConfigSelection(choices=[
("off", _("Off")), ("on", _("On"))
],
default="on")
config.usage.lcd_standbypowerled.addNotifier(setPowerLEDstanbystate)
config.usage.lcd_deepstandbypowerled = ConfigSelection(choices=[
("off", _("Off")), ("on", _("On"))
],
default="on")
config.usage.lcd_deepstandbypowerled.addNotifier(
setPowerLEDdeepstanbystate)
config.lcd.ledpowercolor = ConfigSelection(choices=[("0", _("Off")),
("1", _("Blue")),
("2", _("Red")),
("3", _("Violet"))
],
default="1")
config.lcd.ledpowercolor.addNotifier(setLedPowerColor)
config.lcd.ledstandbycolor = ConfigSelection(choices=[("0", _("Off")),
("1", _("Blue")),
("2", _("Red")),
("3",
_("Violet"))],
default="3")
config.lcd.ledstandbycolor.addNotifier(setLedStandbyColor)
config.lcd.ledsuspendcolor = ConfigSelection(choices=[("0", _("Off")),
("1", _("Blue")),
("2", _("Red")),
("3",
_("Violet"))],
default="2")
config.lcd.ledsuspendcolor.addNotifier(setLedSuspendColor)
colorsList = [
("0xff0000", _("Red")),
("0xff3333", _("Rose")),
("0xff5500", _("Orange")),
("0xdd9900", _("Yellow")),
("0x99dd00", _("Lime")),
("0x00ff00", _("Green")),
("0x00ff99", _("Aqua")),
("0x00bbff", _("Olympic blue")),
("0x0000ff", _("Blue")),
("0x6666ff", _("Azure")),
("0x9900ff", _("Purple")),
("0xff0066", _("Pink")),
("0xffffff", _("White")),
]
config.lcd.ledblinkcontrolcolor = ConfigSelection(choices=colorsList,
default="0xffffff")
config.lcd.ledblinkcontrolcolor.addNotifier(setLedBlinkControlColor)
config.lcd.ledbrightnesscontrol = ConfigSlider(default=0xff,
increment=25,
limits=(0, 0xff))
config.lcd.ledbrightnesscontrol.addNotifier(setLedBrightnessControl)
config.lcd.ledcolorcontrolcolor = ConfigSelection(choices=colorsList,
default="0xffffff")
config.lcd.ledcolorcontrolcolor.addNotifier(setLedColorControlColor)
config.lcd.ledfadecontrolcolor = ConfigSelection(choices=colorsList,
default="0xffffff")
config.lcd.ledfadecontrolcolor.addNotifier(setLedFadeControlColor)
config.lcd.power4x7on = ConfigSelection(choices=[("off", _("Off")),
("on", _("On"))],
default="on")
config.lcd.power4x7on.addNotifier(setPower4x7On)
config.lcd.power4x7standby = ConfigSelection(choices=[("off",
_("Off")),
("on", _("On"))],
default="on")
config.lcd.power4x7standby.addNotifier(setPower4x7Standby)
config.lcd.power4x7suspend = ConfigSelection(choices=[("off",
_("Off")),
("on", _("On"))],
default="on")
config.lcd.power4x7suspend.addNotifier(setPower4x7Suspend)
if platform in ("dm4kgen", "8100s"):
standby_default = 4
elif model == "osmega":
standby_default = 10
else:
standby_default = 1
if not ilcd.isOled():
config.lcd.contrast = ConfigSlider(default=5, limits=(0, 20))
config.lcd.contrast.addNotifier(setLCDcontrast)
else:
config.lcd.contrast = ConfigNothing()
if model in ("h3", "ebox5000", "ebox5100", "sh1", "spycat",
"novacombo", "novatwin"):
config.lcd.standby = ConfigSlider(default=standby_default,
limits=(0, 4))
config.lcd.dimbright = ConfigSlider(default=standby_default,
limits=(0, 4))
config.lcd.bright = ConfigSlider(default=4, limits=(0, 4))
elif model == "osmega":
config.lcd.standby = ConfigSlider(default=standby_default,
limits=(0, 10))
config.lcd.dimbright = ConfigSlider(default=standby_default,
limits=(0, 10))
config.lcd.bright = ConfigSlider(default=10, limits=(0, 10))
else:
config.lcd.standby = ConfigSlider(default=standby_default,
limits=(0, 10))
config.lcd.dimbright = ConfigSlider(default=standby_default,
limits=(0, 10))
config.lcd.bright = ConfigSlider(
default=BoxInfo.getItem("DefaultDisplayBrightness"),
limits=(0, 10))
config.lcd.dimbright.addNotifier(setLCDdimbright)
config.lcd.dimbright.apply = lambda: setLCDdimbright(config.lcd.
dimbright)
config.lcd.dimdelay = ConfigSelection(choices=[
("5", "5 %s" % _("seconds")), ("10", "10 %s" % _("seconds")),
("15", "15 %s" % _("seconds")), ("20", "20 %s" % _("seconds")),
("30", "30 %s" % _("seconds")), ("60", "1 %s" % _("minute")),
("120", "2 %s" % _("minutes")), ("300", "5 %s" % _("minutes")),
("0", _("Off"))
],
default="0")
config.lcd.dimdelay.addNotifier(setLCDdimdelay)
config.lcd.standby.addNotifier(setLCDstandbybright)
config.lcd.standby.apply = lambda: setLCDstandbybright(config.lcd.
standby)
config.lcd.bright.addNotifier(setLCDbright)
config.lcd.bright.apply = lambda: setLCDbright(config.lcd.bright)
config.lcd.bright.callNotifiersOnSaveAndCancel = True
config.lcd.invert = ConfigYesNo(default=False)
config.lcd.invert.addNotifier(setLCDinverted)
def PiconPackChanged(configElement):
configElement.save()
config.lcd.picon_pack = ConfigYesNo(default=False)
config.lcd.picon_pack.addNotifier(PiconPackChanged)
config.lcd.flip = ConfigYesNo(default=False)
config.lcd.flip.addNotifier(setLCDflipped)
if BoxInfo.getItem("LcdLiveTV"):
def lcdLiveTvChanged(configElement):
if "live_enable" in BoxInfo.getItem("LcdLiveTV"):
fileWriteLine(
BoxInfo.getItem("LcdLiveTV"),
configElement.value and "enable" or "disable")
else:
fileWriteLine(BoxInfo.getItem("LcdLiveTV"),
configElement.value and "0" or "1")
try:
InfoBarInstance = InfoBar.instance
InfoBarInstance and InfoBarInstance.session.open(
dummyScreen)
except:
pass
config.lcd.showTv = ConfigYesNo(default=False)
config.lcd.showTv.addNotifier(lcdLiveTvChanged)
if BoxInfo.getItem("LCDMiniTV") and platform not in ("gb7356",
"gb7252",
"gb72604"):
config.lcd.minitvmode = ConfigSelection(choices=[
("0", _("Normal")), ("1", _("MiniTV")), ("2", _("OSD")),
("3", _("MiniTV with OSD"))
],
default="0")
config.lcd.minitvmode.addNotifier(setLCDminitvmode)
config.lcd.minitvpipmode = ConfigSelection(choices=[
("0", _("Off")), ("5", _("PIP")), ("7", _("PIP with OSD"))
],
default="0")
config.lcd.minitvpipmode.addNotifier(setLCDminitvpipmode)
config.lcd.minitvfps = ConfigSlider(default=30, limits=(0, 30))
config.lcd.minitvfps.addNotifier(setLCDminitvfps)
if BoxInfo.getItem("VFD_scroll_repeats") and BoxInfo.getItem(
"VFDRepeats"):
def scroll_repeats(configElement):
fileWriteLine(BoxInfo.getItem("VFD_scroll_repeats"),
configElement.value)
config.usage.vfd_scroll_repeats = ConfigSelection(choices=[
("0", _("None")), ("1", _("1X")), ("2", _("2X")),
("3", _("3X")), ("4", _("4X")), ("500", _("Continuous"))
],
default="3")
config.usage.vfd_scroll_repeats.addNotifier(
scroll_repeats, immediate_feedback=False)
else:
config.usage.vfd_scroll_repeats = ConfigNothing()
if BoxInfo.getItem("VFD_scroll_delay") and BoxInfo.getItem(
"VFDRepeats"):
def scroll_delay(configElement):
if BoxInfo.getItem("VFDDelay"):
fileWriteLine(BoxInfo.getItem("VFD_scroll_delay"),
hex(int(configElement.value)))
else:
fileWriteLine(BoxInfo.getItem("VFD_scroll_delay"),
configElement.value)
config.usage.vfd_scroll_delay = ConfigSlider(default=150,
increment=10,
limits=(0, 500))
config.usage.vfd_scroll_delay.addNotifier(scroll_delay,
immediate_feedback=False)
config.lcd.hdd = ConfigYesNo(default=True)
else:
config.lcd.hdd = ConfigNothing()
config.usage.vfd_scroll_delay = ConfigNothing()
if BoxInfo.getItem("VFD_initial_scroll_delay") and BoxInfo.getItem(
"VFDRepeats"):
def initial_scroll_delay(configElement):
if BoxInfo.getItem("VFDDelay"):
fileWriteLine(BoxInfo.getItem("VFD_initial_scroll_delay"),
hex(int(configElement.value)))
else:
fileWriteLine(BoxInfo.getItem("VFD_initial_scroll_delay"),
configElement.value)
config.usage.vfd_initial_scroll_delay = ConfigSelection(
choices=[("3000", "3 %s" % _("seconds")),
("5000", "5 %s" % _("seconds")),
("10000", "10 %s" % _("seconds")),
("20000", "20 %s" % _("seconds")),
("30000", "30 %s" % _("seconds")),
("0", _("No delay"))],
default="10000")
config.usage.vfd_initial_scroll_delay.addNotifier(
initial_scroll_delay, immediate_feedback=False)
else:
config.usage.vfd_initial_scroll_delay = ConfigNothing()
if BoxInfo.getItem("VFD_final_scroll_delay") and BoxInfo.getItem(
"VFDRepeats"):
def final_scroll_delay(configElement):
if BoxInfo.getItem("VFDDelay"):
fileWriteLine(BoxInfo.getItem("VFD_final_scroll_delay"),
hex(int(configElement.value)))
else:
fileWriteLine(BoxInfo.getItem("VFD_final_scroll_delay"),
configElement.value)
config.usage.vfd_final_scroll_delay = ConfigSelection(
choices=[("3000", "3 %s" % _("seconds")),
("5000", "5 %s" % _("seconds")),
("10000", "10 %s" % _("seconds")),
("20000", "20 %s" % _("seconds")),
("30000", "30 %s" % _("seconds")),
("0", _("No delay"))],
default="10000")
config.usage.vfd_final_scroll_delay.addNotifier(
final_scroll_delay, immediate_feedback=False)
else:
config.usage.vfd_final_scroll_delay = ConfigNothing()
if exists("/proc/stb/lcd/show_symbols"):
config.lcd.mode = ConfigSelection(choices=[("0", _("No")),
("1", _("Yes"))],
default="1")
config.lcd.mode.addNotifier(setLCDmode)
else:
config.lcd.mode = ConfigNothing()
if exists("/proc/stb/power/vfd") or exists("/proc/stb/lcd/vfd"):
config.lcd.power = ConfigSelection(choices=[("0", _("No")),
("1", _("Yes"))],
default="1")
config.lcd.power.addNotifier(setLCDpower)
else:
config.lcd.power = ConfigNothing()
if exists("/proc/stb/fb/sd_detach"):
config.lcd.fblcddisplay = ConfigSelection(choices=[("1", _("No")),
("0", _("Yes"))
],
default="1")
config.lcd.fblcddisplay.addNotifier(setfblcddisplay)
else:
config.lcd.fblcddisplay = ConfigNothing()
if exists("/proc/stb/lcd/show_outputresolution"):
config.lcd.showoutputresolution = ConfigSelection(choices=[
("0", _("No")), ("1", _("Yes"))
],
default="1")
config.lcd.showoutputresolution.addNotifier(
setLCDshowoutputresolution)
else:
config.lcd.showoutputresolution = ConfigNothing()
if model == "vuultimo":
config.lcd.ledblinkingtime = ConfigSlider(default=5,
increment=1,
limits=(0, 15))
config.lcd.ledblinkingtime.addNotifier(setLEDblinkingtime)
config.lcd.ledbrightnessdeepstandby = ConfigSlider(default=1,
increment=1,
limits=(0, 15))
config.lcd.ledbrightnessdeepstandby.addNotifier(setLEDnormalstate)
config.lcd.ledbrightnessdeepstandby.addNotifier(setLEDdeepstandby)
config.lcd.ledbrightnessdeepstandby.apply = lambda: setLEDdeepstandby(
config.lcd.ledbrightnessdeepstandby)
config.lcd.ledbrightnessstandby = ConfigSlider(default=1,
increment=1,
limits=(0, 15))
config.lcd.ledbrightnessstandby.addNotifier(setLEDnormalstate)
config.lcd.ledbrightnessstandby.apply = lambda: setLEDnormalstate(
config.lcd.ledbrightnessstandby)
config.lcd.ledbrightness = ConfigSlider(default=3,
increment=1,
limits=(0, 15))
config.lcd.ledbrightness.addNotifier(setLEDnormalstate)
config.lcd.ledbrightness.apply = lambda: setLEDnormalstate(
config.lcd.ledbrightness)
config.lcd.ledbrightness.callNotifiersOnSaveAndCancel = True
else:
def doNothing():
pass
config.lcd.ledbrightness = ConfigNothing()
config.lcd.ledbrightness.apply = lambda: doNothing()
config.lcd.ledbrightnessstandby = ConfigNothing()
config.lcd.ledbrightnessstandby.apply = lambda: doNothing()
config.lcd.ledbrightnessdeepstandby = ConfigNothing()
config.lcd.ledbrightnessdeepstandby.apply = lambda: doNothing()
config.lcd.ledblinkingtime = ConfigNothing()
else:
def doNothing():
pass
config.lcd.contrast = ConfigNothing()
config.lcd.bright = ConfigNothing()
config.lcd.standby = ConfigNothing()
config.lcd.bright.apply = lambda: doNothing()
config.lcd.standby.apply = lambda: doNothing()
config.lcd.power = ConfigNothing()
config.lcd.fblcddisplay = ConfigNothing()
config.lcd.mode = ConfigNothing()
config.lcd.hdd = ConfigNothing()
config.lcd.scroll_speed = ConfigSelection(choices=[("500", _("Slow")),
("300",
_("Normal")),
("100", _("Fast"))],
default="300")
config.lcd.scroll_delay = ConfigSelection(choices=[
("10000", "10 %s" % _("seconds")), ("20000",
"20 %s" % _("seconds")),
("30000", "30 %s" % _("seconds")), ("60000", "1 %s" % _("minute")),
("300000", "5 %s" % _("minutes")), ("noscrolling", _("Off"))
],
default="10000")
config.lcd.showoutputresolution = ConfigNothing()
config.lcd.ledbrightness = ConfigNothing()
config.lcd.ledbrightness.apply = lambda: doNothing()
config.lcd.ledbrightnessstandby = ConfigNothing()
config.lcd.ledbrightnessstandby.apply = lambda: doNothing()
config.lcd.ledbrightnessdeepstandby = ConfigNothing()
config.lcd.ledbrightnessdeepstandby.apply = lambda: doNothing()
config.lcd.ledblinkingtime = ConfigNothing()
config.lcd.picon_pack = ConfigNothing()
config.misc.standbyCounter.addNotifier(standbyCounterChanged,
initial_call=False)
def getCPUInfoString():
cpuCount = 0
cpuSpeedStr = "-"
cpuSpeedMhz = _getCPUSpeedMhz()
processor = ""
lines = fileReadLines("/proc/cpuinfo", source=MODULE_NAME)
if lines:
for line in lines:
line = [x.strip() for x in line.strip().split(":", 1)]
if not processor and line[0] in ("system type", "model name",
"Processor"):
processor = line[1].split()[0]
elif not cpuSpeedMhz and line[0] == "cpu MHz":
cpuSpeedMhz = float(line[1])
elif line[0] == "processor":
cpuCount += 1
if processor.startswith("ARM") and isfile("/proc/stb/info/chipset"):
processor = "%s (%s)" % (fileReadLine(
"/proc/stb/info/chipset", "",
source=MODULE_NAME).upper(), processor)
if not cpuSpeedMhz:
cpuSpeed = fileReadLine(
"/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq",
source=MODULE_NAME)
if cpuSpeed:
cpuSpeedMhz = int(cpuSpeed) / 1000
temperature = None
if isfile("/proc/stb/fp/temp_sensor_avs"):
temperature = fileReadLine("/proc/stb/fp/temp_sensor_avs",
source=MODULE_NAME)
elif isfile("/proc/stb/power/avs"):
temperature = fileReadLine("/proc/stb/power/avs",
source=MODULE_NAME)
# elif isfile("/proc/stb/fp/temp_sensor"):
# temperature = fileReadLine("/proc/stb/fp/temp_sensor", source=MODULE_NAME)
# elif isfile("/proc/stb/sensors/temp0/value"):
# temperature = fileReadLine("/proc/stb/sensors/temp0/value", source=MODULE_NAME)
# elif isfile("/proc/stb/sensors/temp/value"):
# temperature = fileReadLine("/proc/stb/sensors/temp/value", source=MODULE_NAME)
elif isfile("/sys/devices/virtual/thermal/thermal_zone0/temp"):
temperature = fileReadLine(
"/sys/devices/virtual/thermal/thermal_zone0/temp",
source=MODULE_NAME)
if temperature:
temperature = int(temperature) / 1000
elif isfile("/sys/class/thermal/thermal_zone0/temp"):
temperature = fileReadLine("/sys/class/thermal/thermal_zone0/temp",
source=MODULE_NAME)
if temperature:
temperature = int(temperature) / 1000
elif isfile("/proc/hisi/msp/pm_cpu"):
lines = fileReadLines("/proc/hisi/msp/pm_cpu", source=MODULE_NAME)
if lines:
for line in lines:
if "temperature = " in line:
temperature = int(
line.split("temperature = ")[1].split()[0])
if cpuSpeedMhz and cpuSpeedMhz >= 1000:
cpuSpeedStr = _("%s GHz") % format_string("%.1f",
cpuSpeedMhz / 1000)
else:
cpuSpeedStr = _("%d MHz") % int(cpuSpeedMhz)
if temperature:
degree = u"\u00B0"
if not isinstance(degree, str):
degree = degree.encode("UTF-8", errors="ignore")
if isinstance(temperature, float):
temperature = format_string("%.1f", temperature)
else:
temperature = str(temperature)
return (processor, cpuSpeedStr,
ngettext("%d core", "%d cores", cpuCount) % cpuCount,
"%s%s C" % (temperature, degree))
#return ("%s %s MHz (%s) %s%sC") % (processor, cpuSpeed, ngettext("%d core", "%d cores", cpuCount) % cpuCount, temperature, degree)
return (processor, cpuSpeedStr,
ngettext("%d core", "%d cores", cpuCount) % cpuCount, "")
def getBoxRCType():
return fileReadLine("/proc/stb/ir/rc/type", "unknown", source=MODULE_NAME).strip()
def getBoxProcType():
return fileReadLine("/proc/stb/info/type", "unknown", source=MODULE_NAME).strip().lower()
def getBuildDateString():
version = fileReadLine("/etc/version", source=MODULE_NAME)
if version is None:
return _("Unknown")
return "%s-%s-%s" % (version[:4], version[4:6], version[6:8])
def createInitializeJob(self):
print("[Harddisk] Initializing storage device...")
job = Task.Job(_("Initializing storage device..."))
size = self.diskSize()
print("[Harddisk] Disk size: %s MB." % size)
task = UnmountTask(job, self)
task = Task.PythonTask(job, _("Removing partition table."))
task.work = self.killPartitionTable
task.weighting = 1
task = Task.LoggingTask(job, _("Rereading partition table."))
task.weighting = 1
task.setTool("hdparm")
task.args.append("-z")
task.args.append(self.disk_path)
task = Task.ConditionTask(job,
_("Waiting for partition."),
timeoutCount=20)
task.check = lambda: not exists(self.partitionPath("1"))
task.weighting = 1
if exists("/usr/sbin/parted"):
use_parted = True
else:
if size > 2097151:
addInstallTask(job, "parted")
use_parted = True
else:
use_parted = False
print("[Harddisk] Creating partition.")
task = Task.LoggingTask(job, _("Creating partition."))
task.weighting = 5
if use_parted:
task.setTool("parted")
if size < 1024:
alignment = "min" # On very small devices, align to block only.
else:
alignment = "opt" # Prefer optimal alignment for performance.
if size > 2097151:
parttype = "gpt"
else:
parttype = "msdos"
task.args += [
"-a", alignment, "-s", self.disk_path, "mklabel", parttype,
"mkpart", "primary", "0%", "100%"
]
else:
task.setTool("sfdisk")
task.args.append("-f")
task.args.append("-uS")
task.args.append(self.disk_path)
if size > 128000:
# Start at sector 8 to better support 4k aligned disks
print("[Harddisk] Detected >128GB disk, using 4k alignment.")
task.initial_input = "8,,L\n;0,0\n;0,0\n;0,0\ny\n"
else:
# Smaller disks (CF cards, sticks etc) don't need that
task.initial_input = ",,L\n;\n;\n;\ny\n"
task = Task.ConditionTask(job, _("Waiting for partition"))
task.check = lambda: exists(self.partitionPath("1"))
task.weighting = 1
task = MkfsTask(job, _("Creating filesystem"))
big_o_options = ["dir_index"]
if isFileSystemSupported("ext4"):
task.setTool("mkfs.ext4")
if size > 20000:
try:
version = map(
int,
fileReadLine("/proc/version").split(" ", 4)[2].split(
".", 2)[:2])
if (version[0] > 3) or (version[0] > 2
and version[1] >= 2):
# Linux version 3.2 supports bigalloc and -C option, use 256k blocks
task.args += ["-C", "262144"]
big_o_options.append("bigalloc")
except Exception as err:
print(
"[Harddisk] Error: Failed to detect Linux version - '%s'!"
% str(err))
else:
task.setTool("mkfs.ext3")
if size > 250000:
# No more than 256k i-nodes (prevent problems with fsck memory requirements)
task.args += ["-T", "largefile", "-N", "262144"]
big_o_options.append("sparse_super")
elif size > 16384:
# between 16GB and 250GB: 1 i-node per megabyte
task.args += ["-T", "largefile"]
big_o_options.append("sparse_super")
elif size > 2048:
# Over 2GB: 32 i-nodes per megabyte
task.args += ["-T", "largefile", "-N", str(size * 32)]
task.args += [
"-F", "-F", "-m0", "-O", ",".join(big_o_options),
self.partitionPath("1")
]
task = MountTask(job, self)
task.weighting = 3
task = Task.ConditionTask(job, _("Waiting for mount"), timeoutCount=20)
task.check = self.mountDevice
task.weighting = 1
task = Task.PythonTask(job, _("Create directory") + ": movie")
task.work = self.createMovieDir
task.weighting = 1
return job
def readStats(self):
line = fileReadLine(pathjoin("/sys/block", self.device, "stat"))
if line is None:
return -1, -1
data = line.split(None, 5)
return (int(data[0]), int(data[4]))
def getBlockDevInfo(self, blockdev):
devpath = "/sys/block/" + blockdev
error = False
removable = False
BLACKLIST = []
if BoxInfo.getItem("HasMMC"):
BLACKLIST = ["%s" % (BoxInfo.getItem("mtdrootfs")[0:7])]
if BoxInfo.getItem("HasMMC") and "root=/dev/mmcblk0p1" in fileReadLine(
"/proc/cmdline", ""):
BLACKLIST = ["mmcblk0p1"]
blacklisted = False
if blockdev[:7] in BLACKLIST:
blacklisted = True
if blockdev.startswith("mmcblk") and (search(r"mmcblk\dboot", blockdev)
or search(
r"mmcblk\drpmb", blockdev)):
blacklisted = True
is_cdrom = False
is_mmc = False
partitions = []
try:
if exists(devpath + "/removable"):
removable = bool(
int(fileReadLine(pathjoin(devpath, "/removable"), "0")))
if exists(devpath + "/dev"):
dev = fileReadLine(pathjoin(devpath, "dev"))
subdev = False if int(dev.split(":")[1]) % 32 == 0 else True
dev = int(dev.split(":")[0])
else:
dev = None
subdev = False
# blacklist ram, loop, mtdblock, romblock, ramzswap
blacklisted = dev in [1, 7, 31, 253, 254]
# blacklist non-root eMMC devices
if not blacklisted and dev == 179:
is_mmc = True
if (BoxInfo.getItem("BootDevice") and blockdev.startswith(
BoxInfo.getItem("BootDevice"))) or subdev:
blacklisted = True
if blockdev[0:2] == "sr":
is_cdrom = True
if blockdev[0:2] == "hd":
try:
if "cdrom" in fileReadLine(
pathjoin("/proc/ide", blockdev, "media"), ""):
is_cdrom = True
except (IOError, OSError):
error = True
# check for partitions
if not is_cdrom and not is_mmc and exists(devpath):
for partition in listdir(devpath):
if partition[0:len(blockdev)] != blockdev:
continue
if dev == 179 and not search(r"mmcblk\dp\d+", partition):
continue
partitions.append(partition)
else:
self.cd = blockdev
except (IOError, OSError):
error = True
# check for medium
medium_found = True
try:
if exists(pathjoin("/dev", blockdev)):
open(pathjoin("/dev", blockdev)).close()
except (IOError, OSError) as err:
if err.errno == 159: # no medium present
medium_found = False
return error, blacklisted, removable, is_cdrom, partitions, medium_found
if item in self.immutableListor or item in self.procList:
print(
"[BoxInfo] Error: Item '%s' is immutable and can not be deleted!"
% item)
elif item in self.boxInfo:
del self.boxInfo[item]
return True
return False
BoxInfo = BoxInformation()
from Tools.Multiboot import getMBbootdevice, getMultibootslots # This import needs to be here to avoid a SystemInfo load loop!
# Parse the boot commandline.
cmdline = fileReadLine("/proc/cmdline", source=MODULE_NAME)
cmdline = {k: v.strip('"') for k, v in findall(r'(\S+)=(".*?"|\S+)', cmdline)}
def getNumVideoDecoders():
numVideoDecoders = 0
while fileExists("/dev/dvb/adapter0/video%d" % numVideoDecoders, "f"):
numVideoDecoders += 1
return numVideoDecoders
def countFrontpanelLEDs():
numLeds = fileExists("/proc/stb/fp/led_set_pattern") and 1 or 0
while fileExists("/proc/stb/fp/led%d_pattern" % numLeds):
numLeds += 1
return numLeds
def getKernelVersionString():
version = fileReadLine("/proc/version", source=MODULE_NAME)
if version is None:
return _("Unknown")
return version.split(" ", 4)[2].split("-", 2)[0]
def InitLcd():
# FIXME remove getBoxType
if getBoxType() in ('gbx34k', 'force4', 'alien5', 'viperslim', 'lunix',
'lunix4k', 'purehdse', 'vipert2c', 'evoslimse',
'evoslimt2c', 'valalinux', 'tmtwin4k', 'tmnanom3',
'mbmicrov2', 'revo4k', 'force3uhd', 'force2nano',
'evoslim', 'wetekplay', 'wetekplay2', 'wetekhub',
'ultrabox', 'novaip', 'dm520', 'dm525', 'purehd',
'mutant11', 'xpeedlxpro', 'zgemmai55', 'sf98',
'et7x00mini', 'xpeedlxcs2', 'xpeedlxcc', 'e4hd',
'e4hdhybrid', 'mbmicro', 'beyonwizt2', 'amikomini',
'dynaspark', 'amiko8900', 'sognorevolution',
'arguspingulux', 'arguspinguluxmini',
'arguspinguluxplus', 'sparkreloaded', 'sabsolo',
'sparklx', 'gis8120', 'gb800se', 'gb800solo',
'gb800seplus', 'gbultrase', 'gbipbox', 'tmsingle',
'tmnano2super', 'iqonios300hd', 'iqonios300hdv2',
'optimussos1plus', 'optimussos1', 'vusolo', 'et4x00',
'et5x00', 'et6x00', 'et7000', 'et7100', 'mixosf7',
'mixoslumi', 'gbx1', 'gbx2', 'gbx3', 'gbx3h'):
detected = False
elif getBoxType() in ('pulse4kmini', ):
detected = True
else:
detected = eDBoxLCD.getInstance().detected()
BoxInfo.setItem("Display", detected)
config.lcd = ConfigSubsection()
if exists("/proc/stb/lcd/mode"):
can_lcdmodechecking = fileReadLine("/proc/stb/lcd/mode")
else:
can_lcdmodechecking = False
BoxInfo.setItem("LCDMiniTV", can_lcdmodechecking)
if detected:
ilcd = LCD()
if can_lcdmodechecking:
def setLCDModeMinitTV(configElement):
print("[Lcd] setLCDModeMinitTV='%s'." % configElement.value)
fileWriteLine("/proc/stb/lcd/mode", configElement.value)
def setMiniTVFPS(configElement):
print("[Lcd] setMiniTVFPS='%s'." % configElement.value)
fileWriteLine("/proc/stb/lcd/fps", configElement.value)
def setLCDModePiP(configElement):
pass # DEBUG: Should this be doing something?
def setLCDScreenshot(configElement):
ilcd.setScreenShot(configElement.value)
config.lcd.modepip = ConfigSelection(choices={
"0": _("Off"),
"5": _("PiP"),
"7": _("PiP with OSD")
},
default="0")
config.lcd.modepip.addNotifier(setLCDModePiP)
config.lcd.screenshot = ConfigYesNo(default=False)
config.lcd.screenshot.addNotifier(setLCDScreenshot)
config.lcd.modeminitv = ConfigSelection(choices={
"0": _("normal"),
"1": _("MiniTV"),
"2": _("OSD"),
"3": _("MiniTV with OSD")
},
default="0")
config.lcd.fpsminitv = ConfigSlider(default=30, limits=(0, 30))
config.lcd.modeminitv.addNotifier(setLCDModeMinitTV)
config.lcd.fpsminitv.addNotifier(setMiniTVFPS)
else:
config.lcd.modeminitv = ConfigNothing()
config.lcd.screenshot = ConfigNothing()
config.lcd.fpsminitv = ConfigNothing()
config.lcd.scroll_speed = ConfigSelection(choices=[("500", _("slow")),
("300",
_("normal")),
("100", _("fast"))],
default="300")
config.lcd.scroll_delay = ConfigSelection(choices=[
("10000", "10 %s" % _("seconds")), ("20000",
"20 %s" % _("seconds")),
("30000", "30 %s" % _("seconds")), ("60000", "1 %s" % _("minute")),
("300000", "5 %s" % _("minutes")), ("noscrolling", _("Off"))
],
default="10000")
def setLCDbright(configElement):
ilcd.setBright(configElement.value)
def setLCDstandbybright(configElement):
ilcd.setStandbyBright(configElement.value)
def setLCDdimbright(configElement):
ilcd.setDimBright(configElement.value)
def setLCDdimdelay(configElement):
ilcd.setDimDelay(configElement.value)
def setLCDcontrast(configElement):
ilcd.setContrast(configElement.value)
def setLCDinverted(configElement):
ilcd.setInverted(configElement.value)
def setLCDflipped(configElement):
ilcd.setFlipped(configElement.value)
def setLCDminitvmode(configElement):
ilcd.setLCDMiniTVMode(configElement.value)
def setLCDminitvpipmode(configElement):
ilcd.setLCDMiniTVPIPMode(configElement.value)
def setLCDminitvfps(configElement):
ilcd.setLCDMiniTVFPS(configElement.value)
def setLEDnormalstate(configElement):
ilcd.setLEDNormalState(configElement.value)
def setLEDdeepstandby(configElement):
ilcd.setLEDDeepStandbyState(configElement.value)
def setLEDblinkingtime(configElement):
ilcd.setLEDBlinkingTime(configElement.value)
def setPowerLEDstate(configElement):
if exists("/proc/stb/power/powerled"):
fileWriteLine("/proc/stb/power/powerled",
"on" if configElement.value else "off")
def setPowerLEDstate2(configElement):
if exists("/proc/stb/power/powerled2"):
fileWriteLine("/proc/stb/power/powerled2",
"on" if configElement.value else "off")
def setPowerLEDstanbystate(configElement):
if exists("/proc/stb/power/standbyled"):
fileWriteLine("/proc/stb/power/standbyled",
"on" if configElement.value else "off")
def setPowerLEDdeepstanbystate(configElement):
if exists("/proc/stb/power/suspendled"):
fileWriteLine("/proc/stb/power/suspendled",
"on" if configElement.value else "off")
def setLedPowerColor(configElement):
if exists("/proc/stb/fp/ledpowercolor"):
fileWriteLine("/proc/stb/fp/ledpowercolor",
configElement.value)
def setLedStandbyColor(configElement):
if exists("/proc/stb/fp/ledstandbycolor"):
fileWriteLine("/proc/stb/fp/ledstandbycolor",
configElement.value)
def setLedSuspendColor(configElement):
if exists("/proc/stb/fp/ledsuspendledcolor"):
fileWriteLine("/proc/stb/fp/ledsuspendledcolor",
configElement.value)
def setLedBlinkControlColor(configElement):
if exists("/proc/stb/fp/led_blink"):
fileWriteLine("/proc/stb/fp/led_blink", configElement.value)
def setLedBrightnessControl(configElement):
if exists("/proc/stb/fp/led_brightness"):
fileWriteLine("/proc/stb/fp/led_brightness",
configElement.value)
def setLedColorControlColor(configElement):
if exists("/proc/stb/fp/led_color"):
fileWriteLine("/proc/stb/fp/led_color", configElement.value)
def setLedFadeControlColor(configElement):
if exists("/proc/stb/fp/led_fade"):
fileWriteLine("/proc/stb/fp/led_fade", configElement.value)
def setPower4x7On(configElement):
if exists("/proc/stb/fp/power4x7on"):
fileWriteLine("/proc/stb/fp/power4x7on",
"on" if configElement.value else "off")
def setPower4x7Standby(configElement):
if exists("/proc/stb/fp/power4x7standby"):
fileWriteLine("/proc/stb/fp/power4x7standby",
"on" if configElement.value else "off")
def setPower4x7Suspend(configElement):
if exists("/proc/stb/fp/power4x7suspend"):
fileWriteLine("/proc/stb/fp/power4x7suspend",
"on" if configElement.value else "off")
def setXcoreVFD(configElement):
if exists("/sys/module/brcmstb_osmega/parameters/pt6302_cgram"):
fileWriteLine(
"/sys/module/brcmstb_osmega/parameters/pt6302_cgram",
configElement.value)
if exists("/sys/module/brcmstb_spycat4k/parameters/pt6302_cgram"):
fileWriteLine(
"/sys/module/brcmstb_spycat4k/parameters/pt6302_cgram",
configElement.value)
if exists(
"/sys/module/brcmstb_spycat4kmini/parameters/pt6302_cgram"
):
fileWriteLine(
"/sys/module/brcmstb_spycat4kmini/parameters/pt6302_cgram",
configElement.value)
if exists(
"/sys/module/brcmstb_spycat4kcombo/parameters/pt6302_cgram"
):
fileWriteLine(
"/sys/module/brcmstb_spycat4kcombo/parameters/pt6302_cgram",
configElement.value)
config.usage.vfd_xcorevfd = ConfigSelection(choices=[
("0", _("12 character")), ("1", _("8 character"))
],
default="0")
config.usage.vfd_xcorevfd.addNotifier(setXcoreVFD)
config.usage.lcd_powerled = ConfigOnOff(default=True)
config.usage.lcd_powerled.addNotifier(setPowerLEDstate)
config.usage.lcd_powerled2 = ConfigOnOff(default=True)
config.usage.lcd_powerled2.addNotifier(setPowerLEDstate2)
config.usage.lcd_standbypowerled = ConfigOnOff(default=True)
config.usage.lcd_standbypowerled.addNotifier(setPowerLEDstanbystate)
config.usage.lcd_deepstandbypowerled = ConfigOnOff(default=True)
config.usage.lcd_deepstandbypowerled.addNotifier(
setPowerLEDdeepstanbystate)
if getBoxType() in ('dual', ):
config.usage.lcd_ledpowercolor = ConfigSelection(
default="1", choices=[("0", _("off")), ("1", _("blue"))])
config.usage.lcd_ledpowercolor.addNotifier(setLedPowerColor)
config.usage.lcd_ledstandbycolor = ConfigSelection(
default="1", choices=[("0", _("off")), ("1", _("blue"))])
config.usage.lcd_ledstandbycolor.addNotifier(setLedStandbyColor)
config.usage.lcd_ledsuspendcolor = ConfigSelection(
default="1", choices=[("0", _("off")), ("1", _("blue"))])
config.usage.lcd_ledsuspendcolor.addNotifier(setLedSuspendColor)
else:
config.usage.lcd_ledpowercolor = ConfigSelection(
default="1",
choices=[("0", _("Off")), ("1", _("blue")), ("2", _("red")),
("3", _("violet"))])
config.usage.lcd_ledpowercolor.addNotifier(setLedPowerColor)
config.usage.lcd_ledstandbycolor = ConfigSelection(
default="3",
choices=[("0", _("Off")), ("1", _("blue")), ("2", _("red")),
("3", _("violet"))])
config.usage.lcd_ledstandbycolor.addNotifier(setLedStandbyColor)
config.usage.lcd_ledsuspendcolor = ConfigSelection(
default="2",
choices=[("0", _("Off")), ("1", _("blue")), ("2", _("red")),
("3", _("violet"))])
config.usage.lcd_ledsuspendcolor.addNotifier(setLedSuspendColor)
config.usage.lcd_power4x7on = ConfigOnOff(default=True)
config.usage.lcd_power4x7on.addNotifier(setPower4x7On)
config.usage.lcd_power4x7standby = ConfigOnOff(default=True)
config.usage.lcd_power4x7standby.addNotifier(setPower4x7Standby)
config.usage.lcd_power4x7suspend = ConfigOnOff(default=True)
config.usage.lcd_power4x7suspend.addNotifier(setPower4x7Suspend)
if model in ('dm900', 'dm920', 'e4hdultra', 'protek4k'):
standby_default = 4
elif model in ("spycat4kmini", "osmega"):
standby_default = 10
else:
standby_default = 1
if not ilcd.isOled():
config.lcd.contrast = ConfigSlider(default=5, limits=(0, 20))
config.lcd.contrast.addNotifier(setLCDcontrast)
else:
config.lcd.contrast = ConfigNothing()
if model in ('novatwin', 'novacombo', 'mixosf5', 'mixosf5mini',
'gi9196m', 'gi9196lite', 'zgemmas2s', 'zgemmash1',
'zgemmash2', 'zgemmass', 'zgemmahs', 'zgemmah2s',
'zgemmah2h', 'spycat'):
config.lcd.standby = ConfigSlider(default=standby_default,
limits=(0, 4))
config.lcd.dimbright = ConfigSlider(default=standby_default,
limits=(0, 4))
config.lcd.bright = ConfigSlider(default=4, limits=(0, 4))
elif model in ("spycat4kmini", "osmega"):
config.lcd.standby = ConfigSlider(default=standby_default,
limits=(0, 10))
config.lcd.dimbright = ConfigSlider(default=standby_default,
limits=(0, 10))
config.lcd.bright = ConfigSlider(default=10, limits=(0, 10))
else:
config.lcd.standby = ConfigSlider(default=standby_default,
limits=(0, 10))
config.lcd.dimbright = ConfigSlider(default=standby_default,
limits=(0, 10))
config.lcd.bright = ConfigSlider(
default=BoxInfo.getItem("DefaultDisplayBrightness"),
limits=(0, 10))
config.lcd.dimbright.addNotifier(setLCDdimbright)
config.lcd.dimbright.apply = lambda: setLCDdimbright(config.lcd.
dimbright)
config.lcd.dimdelay = ConfigSelection(choices=[
("5", "5 %s" % _("seconds")), ("10", "10 %s" % _("seconds")),
("15", "15 %s" % _("seconds")), ("20", "20 %s" % _("seconds")),
("30", "30 %s" % _("seconds")), ("60", "1 %s" % _("minute")),
("120", "2 %s" % _("minutes")), ("300", "5 %s" % _("minutes")),
("0", _("Off"))
],
default="0")
config.lcd.dimdelay.addNotifier(setLCDdimdelay)
config.lcd.standby.addNotifier(setLCDstandbybright)
config.lcd.standby.apply = lambda: setLCDstandbybright(config.lcd.
standby)
config.lcd.bright.addNotifier(setLCDbright)
config.lcd.bright.apply = lambda: setLCDbright(config.lcd.bright)
config.lcd.bright.callNotifiersOnSaveAndCancel = True
config.lcd.invert = ConfigYesNo(default=False)
config.lcd.invert.addNotifier(setLCDinverted)
config.lcd.flip = ConfigYesNo(default=False)
config.lcd.flip.addNotifier(setLCDflipped)
if BoxInfo.getItem("LcdLiveTV"):
def lcdLiveTvChanged(configElement):
open(BoxInfo.getItem("LcdLiveTV"),
"w").write(configElement.value and "0" or "1")
try:
InfoBarInstance = InfoBar.instance
InfoBarInstance and InfoBarInstance.session.open(
dummyScreen)
except:
pass
config.lcd.showTv = ConfigYesNo(default=False)
config.lcd.showTv.addNotifier(lcdLiveTvChanged)
if BoxInfo.getItem("LCDMiniTV") and config.misc.boxtype.value not in (
'gbquad', 'gbquadplus', 'gbquad4k', 'gbue4k'):
config.lcd.minitvmode = ConfigSelection(
[("0", _("normal")), ("1", _("MiniTV")), ("2", _("OSD")),
("3", _("MiniTV with OSD"))], "0")
config.lcd.minitvmode.addNotifier(setLCDminitvmode)
config.lcd.minitvpipmode = ConfigSelection(
[("0", _("Off")), ("5", _("PiP")),
("7", _("PiP with OSD"))], "0")
config.lcd.minitvpipmode.addNotifier(setLCDminitvpipmode)
config.lcd.minitvfps = ConfigSlider(default=30, limits=(0, 30))
config.lcd.minitvfps.addNotifier(setLCDminitvfps)
if BoxInfo.getItem("VFD_scroll_repeats") and model not in (
'ixussone',
'ixusszero') and getDisplayType() not in ('7segment', ):
def scroll_repeats(el):
open(BoxInfo.getItem("VFD_scroll_repeats"),
"w").write(el.value)
choicelist = [("0", _("None")), ("1", _("1x")), ("2", _("2x")),
("3", _("3x")), ("4", _("4x")),
("500", _("Continues"))]
config.usage.vfd_scroll_repeats = ConfigSelection(
default="3", choices=choicelist)
config.usage.vfd_scroll_repeats.addNotifier(
scroll_repeats, immediate_feedback=False)
else:
config.usage.vfd_scroll_repeats = ConfigNothing()
if BoxInfo.getItem("VFD_scroll_delay") and model not in (
'ixussone',
'ixusszero') and getDisplayType() not in ('7segment', ):
def scroll_delay(el):
# add workaround for Boxes who need hex code
if model in ('sf4008', 'beyonwizu4'):
open(BoxInfo.getItem("VFD_scroll_delay"),
"w").write(hex(int(el.value)))
else:
open(BoxInfo.getItem("VFD_scroll_delay"),
"w").write(str(el.value))
config.usage.vfd_scroll_delay = ConfigSlider(default=150,
increment=10,
limits=(0, 500))
config.usage.vfd_scroll_delay.addNotifier(scroll_delay,
immediate_feedback=False)
config.lcd.hdd = ConfigYesNo(default=True)
else:
config.lcd.hdd = ConfigNothing()
config.usage.vfd_scroll_delay = ConfigNothing()
if BoxInfo.getItem("VFD_initial_scroll_delay") and model not in (
'ixussone',
'ixusszero') and getDisplayType() not in ('7segment', ):
def initial_scroll_delay(el):
if model in ('sf4008', 'beyonwizu4'):
# add workaround for Boxes who need hex code
open(BoxInfo.getItem("VFD_initial_scroll_delay"),
"w").write(hex(int(el.value)))
else:
open(BoxInfo.getItem("VFD_initial_scroll_delay"),
"w").write(el.value)
config.usage.vfd_initial_scroll_delay = ConfigSelection(
choices=[("3000", "3 %s" % _("seconds")),
("5000", "5 %s" % _("seconds")),
("10000", "10 %s" % _("seconds")),
("20000", "20 %s" % _("seconds")),
("30000", "30 %s" % _("seconds")),
("0", _("No delay"))],
default="10000")
config.usage.vfd_initial_scroll_delay.addNotifier(
initial_scroll_delay, immediate_feedback=False)
else:
config.usage.vfd_initial_scroll_delay = ConfigNothing()
if BoxInfo.getItem("VFD_final_scroll_delay") and model not in (
'ixussone',
'ixusszero') and getDisplayType() not in ('7segment', ):
def final_scroll_delay(el):
if model in ('sf4008', 'beyonwizu4'):
# add workaround for Boxes who need hex code
open(BoxInfo.getItem("VFD_final_scroll_delay"),
"w").write(hex(int(el.value)))
else:
open(BoxInfo.getItem("VFD_final_scroll_delay"),
"w").write(el.value)
config.usage.vfd_final_scroll_delay = ConfigSelection(
choices=[("3000", "3 %s" % _("seconds")),
("5000", "5 %s" % _("seconds")),
("10000", "10 %s" % _("seconds")),
("20000", "20 %s" % _("seconds")),
("30000", "30 %s" % _("seconds")),
("0", _("No delay"))],
default="10000")
config.usage.vfd_final_scroll_delay.addNotifier(
final_scroll_delay, immediate_feedback=False)
else:
config.usage.vfd_final_scroll_delay = ConfigNothing()
if exists("/proc/stb/lcd/show_symbols"):
def setLCDmode(configElement):
ilcd.setMode("1" if configElement.value else "0")
config.lcd.mode = ConfigYesNo(default=True)
config.lcd.mode.addNotifier(setLCDmode)
else:
config.lcd.mode = ConfigNothing()
if exists("/proc/stb/power/vfd") or exists("/proc/stb/lcd/vfd"):
def setLCDpower(configElement):
ilcd.setPower("1" if configElement.value else "0")
config.lcd.power = ConfigYesNo(default=True)
config.lcd.power.addNotifier(setLCDpower)
else:
config.lcd.power = ConfigNothing()
if exists("/proc/stb/fb/sd_detach"):
def setfblcddisplay(configElement):
ilcd.setfblcddisplay("1" if configElement.value else "0")
config.lcd.fblcddisplay = ConfigYesNo(default=True)
config.lcd.fblcddisplay.addNotifier(setfblcddisplay)
else:
config.lcd.fblcddisplay = ConfigNothing()
if exists("/proc/stb/lcd/show_outputresolution"):
def setLCDshowoutputresolution(configElement):
ilcd.setShowoutputresolution(
"1" if configElement.value else "0")
config.lcd.showoutputresolution = ConfigYesNo(default=True)
config.lcd.showoutputresolution.addNotifier(
setLCDshowoutputresolution)
else:
config.lcd.showoutputresolution = ConfigNothing()
if model == "vuultimo":
config.lcd.ledblinkingtime = ConfigSlider(default=5,
increment=1,
limits=(0, 15))
config.lcd.ledblinkingtime.addNotifier(setLEDblinkingtime)
config.lcd.ledbrightnessdeepstandby = ConfigSlider(default=1,
increment=1,
limits=(0, 15))
config.lcd.ledbrightnessdeepstandby.addNotifier(setLEDnormalstate)
config.lcd.ledbrightnessdeepstandby.addNotifier(setLEDdeepstandby)
config.lcd.ledbrightnessdeepstandby.apply = lambda: setLEDdeepstandby(
config.lcd.ledbrightnessdeepstandby)
config.lcd.ledbrightnessstandby = ConfigSlider(default=1,
increment=1,
limits=(0, 15))
config.lcd.ledbrightnessstandby.addNotifier(setLEDnormalstate)
config.lcd.ledbrightnessstandby.apply = lambda: setLEDnormalstate(
config.lcd.ledbrightnessstandby)
config.lcd.ledbrightness = ConfigSlider(default=3,
increment=1,
limits=(0, 15))
config.lcd.ledbrightness.addNotifier(setLEDnormalstate)
config.lcd.ledbrightness.apply = lambda: setLEDnormalstate(
config.lcd.ledbrightness)
config.lcd.ledbrightness.callNotifiersOnSaveAndCancel = True
else:
def doNothing():
pass
config.lcd.ledbrightness = ConfigNothing()
config.lcd.ledbrightness.apply = lambda: doNothing()
config.lcd.ledbrightnessstandby = ConfigNothing()
config.lcd.ledbrightnessstandby.apply = lambda: doNothing()
config.lcd.ledbrightnessdeepstandby = ConfigNothing()
config.lcd.ledbrightnessdeepstandby.apply = lambda: doNothing()
config.lcd.ledblinkingtime = ConfigNothing()
else:
def doNothing():
pass
config.lcd.contrast = ConfigNothing()
config.lcd.bright = ConfigNothing()
config.lcd.standby = ConfigNothing()
config.lcd.bright.apply = lambda: doNothing()
config.lcd.standby.apply = lambda: doNothing()
config.lcd.power = ConfigNothing()
config.lcd.fblcddisplay = ConfigNothing()
config.lcd.mode = ConfigNothing()
config.lcd.hdd = ConfigNothing()
config.lcd.scroll_speed = ConfigSelection(choices=[("500", _("slow")),
("300",
_("normal")),
("100", _("fast"))],
default="300")
config.lcd.scroll_delay = ConfigSelection(choices=[
("10000", "10 %s" % _("seconds")), ("20000",
"20 %s" % _("seconds")),
("30000", "30 %s" % _("seconds")), ("60000", "1 %s" % _("minute")),
("300000", "5 %s" % _("minutes")), ("noscrolling", _("Off"))
],
default="10000")
config.lcd.showoutputresolution = ConfigNothing()
config.lcd.ledbrightness = ConfigNothing()
config.lcd.ledbrightness.apply = lambda: doNothing()
config.lcd.ledbrightnessstandby = ConfigNothing()
config.lcd.ledbrightnessstandby.apply = lambda: doNothing()
config.lcd.ledbrightnessdeepstandby = ConfigNothing()
config.lcd.ledbrightnessdeepstandby.apply = lambda: doNothing()
config.lcd.ledblinkingtime = ConfigNothing()
config.misc.standbyCounter.addNotifier(standbyCounterChanged,
initial_call=False)
profile("Keymap")
from Components.ActionMap import loadKeymap
loadKeymap(config.usage.keymap.value)
profile("Network")
from Components.Network import InitNetwork
InitNetwork()
profile("LCD")
import Components.Lcd
Components.Lcd.InitLcd()
Components.Lcd.IconCheck()
if platform == "dm4kgen" or model in ("dm7080", "dm820"):
filename = "/proc/stb/hdmi-rx/0/hdmi_rx_monitor"
check = fileReadLine(filename, "", source=MODULE_NAME)
if check.startswith("on"):
fileWriteLine(filename, "off", source=MODULE_NAME)
filename = "/proc/stb/audio/hdmi_rx_monitor"
check = fileReadLine(filename, "", source=MODULE_NAME)
if check.startswith("on"):
fileWriteLine(filename, "off", source=MODULE_NAME)
profile("RFMod")
from Components.RFmod import InitRFmod
InitRFmod()
profile("CommonInterface")
from Screens.Ci import CiHandler, InitCiConfig
InitCiConfig()
def readRemoteControlType(self):
return fileReadLine("/proc/stb/ir/rc/type", "0", source=MODULE_NAME)
from glob import glob
from tempfile import mkdtemp
from Components.Console import Console
from Components.SystemInfo import BoxInfo
from Tools.Directories import fileReadLine, fileReadLines
MODULE_NAME = __name__.split(".")[-1]
PREFIX = "MultiBoot_"
MOUNT = "/bin/mount"
UMOUNT = "/bin/umount"
startupDevice = None
bootSlots = {}
bootArgs = fileReadLine("/sys/firmware/devicetree/base/chosen/bootargs",
source=MODULE_NAME)
def getArgValue(line, arg):
return line.replace("userdataroot",
"rootuserdata").rsplit("%s=" % arg,
1)[1].split(" ", 1)[0]
def getSlotImageData(imageDir):
imageData = {}
path = pathjoin(imageDir, "usr/lib/enigma.info")
if isfile(path):
lines = fileReadLines(path, source=MODULE_NAME)
if lines:
modified = BoxInfo.checkChecksum(lines)
