def test_disconnect_failure_send_message(self): addr = self.MSE.droid.bluetoothGetLocalAddress() if bt_test_utils.is_map_mce_device_connected(self.MCE, addr): connected = True disconnected = bt_test_utils.disconnect_pri_from_sec( self.MCE, self.MSE, [BtEnum.BluetoothProfile.MAP_MCE.value]) # Grace time for the disconnection to complete. time.sleep(3) if not bt_test_utils.is_map_mce_device_connected(self.MCE, addr): disconnected = True self.MCE.log.info("Connected = {}, Disconnected = {}".format( connected, disconnected)) return connected and disconnected and not self.send_message( [self.REMOTE])
def test_a2dp_connect_disconnect_from_snk(self): """ Test Connect/Disconnect on A2DP Sink profile. Pre-Condition: 1. Devices previously bonded and NOT connected on A2dp Steps: 1. Initiate a connection on A2DP Sink profile from SNK 2. Check if they connected. 3. Initiate a disconnect on A2DP Sink profile from SNK 4. Ensure they disconnected on A2dp alone Returns: True if we connected/disconnected successfully False if we did not connect/disconnect successfully Priority: 0 """ # Connect if is_a2dp_connected(self.SNK, self.SRC): self.log.info("Already Connected") else: if (not bt_test_utils.connect_pri_to_sec( self.SNK, self.SRC, set([BtEnum.BluetoothProfile.A2DP_SINK.value]))): return False # Delay to establish A2DP connection before disconnecting time.sleep(5) # Disconnect result = bt_test_utils.disconnect_pri_from_sec( self.SNK, self.SRC, [BtEnum.BluetoothProfile.A2DP_SINK.value]) # Grace timeout to allow a2dp time to disconnect time.sleep(2) if not result: # Additional profile connection check for b/ if bt_test_utils.is_a2dp_snk_device_connected( self.SNK, self.SRC.droid.bluetoothGetLocalAddress()): self.SNK.log.error("Failed to disconnect on A2dp Sink") return False # Logging if we connected right back, since that happens sometimes # Not failing the test if it did though if is_a2dp_connected(self.SNK, self.SRC): self.SNK.log.error("Still connected after a disconnect") return True
def test_send_message_failure_no_map_connection(self): if not bt_test_utils.disconnect_pri_from_sec( self.MCE, self.MSE, [BtEnum.BluetoothProfile.MAP_MCE.value]): return False return not self.send_message([self.REMOTE])
def test_connect_while_media_playing(self): """ BT connect SRC and SNK when the SRC is already playing music and verify SNK strarts streaming after connection. Connect to another device (Audio Sink) via BT while it is playing audio. Check if the audio starts streaming on the Sink. Pre-Condition: 1. Devices previously bonded & Connected Steps: 1. Disconnect TG from CT (since they are connected as a precondition) 2. Play Music on TG (Audio SRC) 3. Get the metadata of the playing music 4. Connect TG and CT 5. Check if the music is streaming on CT (Audio SNK) by checking if its MediaSession became active. 6. Fail if CT is not streaming. 7. Get the metdata from the CT (Audio SNK) and compare it with the metadata from Step 3 8. Fail if the metadata did not match. Returns: True if the event was received False if the event was not received Priority: 0 """ self.log.info("Bluetooth Disconnect the car and phone") result = bt_test_utils.disconnect_pri_from_sec( self.SRC, self.SNK, [BtEnum.BluetoothProfile.A2DP.value]) if not result: # Temporary timeout time.sleep(3) if bt_test_utils.is_a2dp_src_device_connected( self.SRC, self.SNK.droid.bluetoothGetLocalAddress()): self.SRC.log.error("Failed to disconnect on A2dp") return False self._init_mbs() # Play Media on Phone self.TG.droid.bluetoothMediaHandleMediaCommandOnPhone( car_media_utils.CMD_MEDIA_PLAY) # At this point, media should be playing only on phone, not on Car, since they are disconnected if not car_media_utils.isMediaSessionActive( self.log, self.TG, PHONE_MEDIA_BROWSER_SERVICE_NAME) or car_media_utils.isMediaSessionActive( self.log, self.CT, CAR_MEDIA_BROWSER_SERVICE_NAME): self.log.error("Media playing in wrong end") return False # Get the metadata of the song that the phone is playing metadata_TG = self.TG.droid.bluetoothMediaGetCurrentMediaMetaData() if metadata_TG is None: self.TG.log.error("No Media Metadata available from Phone") return False # Now connect to Car on Bluetooth if (not bt_test_utils.connect_pri_to_sec(self.SRC, self.SNK, set( [BtEnum.BluetoothProfile.A2DP.value]))): return False # Wait for a bit for the information to show up in the car side time.sleep(2) # At this point, since we have connected while the Phone was playing media, the car # should automatically play. Both devices should have their respective MediaSessions active if not car_media_utils.isMediaSessionActive( self.log, self.TG, PHONE_MEDIA_BROWSER_SERVICE_NAME): self.TG.log.error("Media not playing in Phone") return False if not car_media_utils.isMediaSessionActive( self.log, self.CT, CAR_MEDIA_BROWSER_SERVICE_NAME): self.CT.log.error("Media not playing in Car") return False # Get the metadata from Car and compare it with the Phone's media metadata before the connection happened. metadata_CT = self.CT.droid.bluetoothMediaGetCurrentMediaMetaData() if metadata_CT is None: self.CT.log.info("No Media Metadata available from car") return car_media_utils.compare_metadata(self.log, metadata_TG, metadata_CT)
def test_disconnect_while_media_playing(self): """ Disconnect BT between CT and TG in the middle of a audio streaming session and check 1) If TG continues to still play music 2) If CT stops playing Pre-Condition: 1. Devices previously bonded & Connected Steps: 1. Invoke Play from CT 2. Check if both CT and TG are playing music by checking if the respective MediaSessions are active 3. Fail if either the CT or TG is not playing 4. Disconnect Bluetooth connection between CT and TG 5. Check if the CT MediaSession stopped being active. Fail if its mediasession is still active. 6. Check if the TG MediaSession is still active. 7. Fail if TG stopped playing music. Returns: True if the CT stopped playing audio and the TG continued after BT disconnect False if the CT still was playing audio or TG stopped after BT disconnect. Priority: 0 """ self._init_mbs() self.log.info("Sending Play command from Car") if not car_media_utils.send_media_passthrough_cmd( self.log, self.CT, self.TG, car_media_utils.CMD_MEDIA_PLAY, car_media_utils.EVENT_PLAY_RECEIVED, DEFAULT_EVENT_TIMEOUT): return False time.sleep(DEFAULT_WAIT_TIME) self.TG.log.info("Phone Media Sessions:") if not car_media_utils.isMediaSessionActive( self.log, self.TG, PHONE_MEDIA_BROWSER_SERVICE_NAME): self.TG.log.error("Media not playing in connected Phone") return False self.CT.log.info("Car Media Sessions:") if not car_media_utils.isMediaSessionActive( self.log, self.CT, CAR_MEDIA_BROWSER_SERVICE_NAME): self.CT.log.error("Media not playing in connected Car") return False self.log.info("Bluetooth Disconnect the car and phone") result = bt_test_utils.disconnect_pri_from_sec( self.SRC, self.SNK, [BtEnum.BluetoothProfile.A2DP.value]) if not result: if bt_test_utils.is_a2dp_src_device_connected( self.SRC, self.SNK.droid.bluetoothGetLocalAddress()): self.SRC.log.error("Failed to disconnect on A2dp") return False self.TG.log.info("Phone Media Sessions:") if not car_media_utils.isMediaSessionActive( self.log, self.TG, PHONE_MEDIA_BROWSER_SERVICE_NAME): self.TG.log.error( "Media stopped playing in phone after BT disconnect") return False self.CT.log.info("Car Media Sessions:") if car_media_utils.isMediaSessionActive( self.log, self.CT, CAR_MEDIA_BROWSER_SERVICE_NAME): self.CT.log.error( "Media still playing in a Car after BT disconnect") return False return True
def test_connect_disconnect_paired(self): """ Tests if we can connect two devices over Headset, A2dp and then disconnect them with success Precondition: 1. Devices are paired. Steps: 1. Initiate connection over A2dp Sink and Headset client profiles. 2. Check if the connection succeeded. Returns: Pass if True Fail if False Priority: 0 """ NUM_TEST_RUNS = 2 failure = 0 addr = self.ph.droid.bluetoothGetLocalAddress() for i in range(NUM_TEST_RUNS): self.log.info("Running test [" + str(i) + "/" + str(NUM_TEST_RUNS) + "]") success = bt_test_utils.connect_pri_to_sec(self.car, self.ph, set( [BtEnum.BluetoothProfile.HEADSET_CLIENT.value, BtEnum.BluetoothProfile.A2DP_SINK.value])) # Check if we got connected. if not success: self.car.log.info("Not all profiles connected.") if (bt_test_utils.is_hfp_client_device_connected(self.car, addr) and bt_test_utils.is_a2dp_snk_device_connected(self.car, addr)): self.car.log.info( "HFP Client or A2DP SRC connected successfully.") else: failure = failure + 1 continue # Disconnect the devices. success = bt_test_utils.disconnect_pri_from_sec( self.car, self.ph, [BtEnum.BluetoothProfile.HEADSET_CLIENT.value, BtEnum.BluetoothProfile.A2DP_SINK.value]) if success is False: self.car.log.info("Disconnect failed.") if (bt_test_utils.is_hfp_client_device_connected(self.car, addr) or bt_test_utils.is_a2dp_snk_device_connected(self.car, addr)): self.car.log.info( "HFP Client or A2DP SRC failed to disconnect.") failure = failure + 1 continue self.log.info("Failure {} total tests {}".format(failure, NUM_TEST_RUNS)) if failure > 0: return False return True