def __init__(self):
super().__init__()
i2c = board.I2C()
int1 = digitalio.DigitalInOut(board.ACCELEROMETER_INTERRUPT)
try:
self._accelerometer = adafruit_lis3dh.LIS3DH_I2C(i2c,
address=0x19,
int1=int1)
except ValueError:
self._accelerometer = adafruit_lis3dh.LIS3DH_I2C(i2c, int1=int1)
# NeoPixels
self._neopixels = neopixel.NeoPixel(board.NEOPIXEL,
self._neopixel_count,
brightness=1,
pixel_order=neopixel.GRB)
self._keys = keypad.ShiftRegisterKeys(
clock=board.BUTTON_CLOCK,
data=board.BUTTON_OUT,
latch=board.BUTTON_LATCH,
key_count=4,
value_when_pressed=True,
)
self._buttons = KeyStates(self._keys)
self._pygamer_joystick_x = analogio.AnalogIn(board.JOYSTICK_X)
self._pygamer_joystick_y = analogio.AnalogIn(board.JOYSTICK_Y)
self._light_sensor = analogio.AnalogIn(board.A7)
class CPB_Gizmo(PyBadgerBase):
"""Class that represents a single Circuit Playground Bluefruit with TFT Gizmo."""
display = None
_audio_out = audiopwmio.PWMAudioOut
_neopixel_count = 10
def __init__(self):
super().__init__()
_i2c = busio.I2C(board.ACCELEROMETER_SCL, board.ACCELEROMETER_SDA)
_int1 = digitalio.DigitalInOut(board.ACCELEROMETER_INTERRUPT)
self.accelerometer = adafruit_lis3dh.LIS3DH_I2C(_i2c,
address=0x19,
int1=_int1)
self.accelerometer.range = adafruit_lis3dh.RANGE_8_G
self.display = tft_gizmo.TFT_Gizmo()
self._display_brightness = 1.0
# NeoPixels
self._neopixels = neopixel.NeoPixel(board.NEOPIXEL,
self._neopixel_count,
brightness=1,
pixel_order=neopixel.GRB)
self._keys = keypad.Keys([board.BUTTON_A, board.BUTTON_B],
value_when_pressed=True,
pull=True)
self._buttons = KeyStates(self._keys)
self._light_sensor = analogio.AnalogIn(board.LIGHT)
@property
def button(self):
"""The buttons on the board.
Example use:
.. code-block:: python
from adafruit_pybadger import pybadger
while True:
if pybadger.button.a:
print("Button A")
elif pybadger.button.b:
print("Button B")
"""
self._buttons.update()
button_values = tuple(
self._buttons.was_pressed(i) for i in range(self._keys.key_count))
return Buttons(button_values[0], button_values[1])
@property
def _unsupported(self):
"""This feature is not supported on CPB Gizmo."""
raise NotImplementedError(
"This feature is not supported on CPB Gizmo.")
class Clue(PyBadgerBase):
"""Class that represents a single CLUE."""
_audio_out = audiopwmio.PWMAudioOut
_neopixel_count = 1
def __init__(self) -> None:
super().__init__()
i2c = board.I2C()
if i2c is not None:
self._accelerometer = adafruit_lsm6ds.lsm6ds33.LSM6DS33(i2c)
# NeoPixels
self._neopixels = neopixel.NeoPixel(board.NEOPIXEL,
self._neopixel_count,
brightness=1,
pixel_order=neopixel.GRB)
self._keys = keypad.Keys([board.BUTTON_A, board.BUTTON_B],
value_when_pressed=False,
pull=True)
self._buttons = KeyStates(self._keys)
@property
def button(self) -> Type[tuple]:
"""The buttons on the board.
Example use:
.. code-block:: python
from adafruit_pybadger import pybadger
while True:
if pybadger.button.a:
print("Button A")
elif pybadger.button.b:
print("Button B")
"""
self._buttons.update()
button_values = tuple(
self._buttons.was_pressed(i) for i in range(self._keys.key_count))
return Buttons(button_values[0], button_values[1])
@property
def _unsupported(self):
"""This feature is not supported on CLUE."""
raise NotImplementedError("This feature is not supported on CLUE.")
# The following is a list of the features available in other PyBadger modules but
# not available for CLUE. If called while using a CLUE, they will result in the
# NotImplementedError raised in the property above.
play_file = _unsupported
light = _unsupported
def __init__(self) -> None:
super().__init__()
i2c = None
if i2c is None:
try:
i2c = board.I2C()
except RuntimeError:
self._accelerometer = None
if i2c is not None:
_i2c_devices = []
for _ in range(10):
# try lock 10 times to avoid infinite loop in sphinx build
if i2c.try_lock():
_i2c_devices = i2c.scan()
i2c.unlock()
break
# PyBadge LC doesn't have accelerometer
if int(0x18) in _i2c_devices or int(0x19) in _i2c_devices:
int1 = digitalio.DigitalInOut(board.ACCELEROMETER_INTERRUPT)
try:
self._accelerometer = adafruit_lis3dh.LIS3DH_I2C(
i2c, address=0x19, int1=int1)
except ValueError:
self._accelerometer = adafruit_lis3dh.LIS3DH_I2C(i2c,
int1=int1)
# NeoPixels
self._neopixels = neopixel.NeoPixel(board.NEOPIXEL,
self._neopixel_count,
brightness=1,
pixel_order=neopixel.GRB)
self._keys = keypad.ShiftRegisterKeys(
clock=board.BUTTON_CLOCK,
data=board.BUTTON_OUT,
latch=board.BUTTON_LATCH,
key_count=8,
value_when_pressed=True,
)
self._buttons = KeyStates(self._keys)
self._light_sensor = analogio.AnalogIn(board.A7)
def __init__(self):
super().__init__()
self._keys = keypad.Keys(
[
board.BUTTON_O,
board.BUTTON_X,
board.BUTTON_Z,
board.BUTTON_RIGHT,
board.BUTTON_DOWN,
board.BUTTON_UP,
board.BUTTON_LEFT,
],
value_when_pressed=False,
pull=True,
)
self._buttons = KeyStates(self._keys)
def __init__(self) -> None:
super().__init__()
i2c = board.I2C()
if i2c is not None:
self._accelerometer = adafruit_lsm6ds.lsm6ds33.LSM6DS33(i2c)
# NeoPixels
self._neopixels = neopixel.NeoPixel(board.NEOPIXEL,
self._neopixel_count,
brightness=1,
pixel_order=neopixel.GRB)
self._keys = keypad.Keys([board.BUTTON_A, board.BUTTON_B],
value_when_pressed=False,
pull=True)
self._buttons = KeyStates(self._keys)
def __init__(self) -> None:
super().__init__()
_i2c = busio.I2C(board.ACCELEROMETER_SCL, board.ACCELEROMETER_SDA)
_int1 = digitalio.DigitalInOut(board.ACCELEROMETER_INTERRUPT)
self.accelerometer = adafruit_lis3dh.LIS3DH_I2C(_i2c, address=0x19, int1=_int1)
self.accelerometer.range = adafruit_lis3dh.RANGE_8_G
self.display = tft_gizmo.TFT_Gizmo()
self._display_brightness = 1.0
# NeoPixels
self._neopixels = neopixel.NeoPixel(
board.NEOPIXEL, self._neopixel_count, brightness=1, pixel_order=neopixel.GRB
)
self._keys = keypad.Keys(
[board.BUTTON_A, board.BUTTON_B], value_when_pressed=True, pull=True
)
self._buttons = KeyStates(self._keys)
self._light_sensor = analogio.AnalogIn(board.LIGHT)
class PyBadge(PyBadgerBase):
"""Class that represents a single PyBadge, PyBadge LC, or EdgeBadge."""
_audio_out = audioio.AudioOut
_neopixel_count = 5
def __init__(self) -> None:
super().__init__()
i2c = None
if i2c is None:
try:
i2c = board.I2C()
except RuntimeError:
self._accelerometer = None
if i2c is not None:
_i2c_devices = []
for _ in range(10):
# try lock 10 times to avoid infinite loop in sphinx build
if i2c.try_lock():
_i2c_devices = i2c.scan()
i2c.unlock()
break
# PyBadge LC doesn't have accelerometer
if int(0x18) in _i2c_devices or int(0x19) in _i2c_devices:
int1 = digitalio.DigitalInOut(board.ACCELEROMETER_INTERRUPT)
try:
self._accelerometer = adafruit_lis3dh.LIS3DH_I2C(
i2c, address=0x19, int1=int1)
except ValueError:
self._accelerometer = adafruit_lis3dh.LIS3DH_I2C(i2c,
int1=int1)
# NeoPixels
self._neopixels = neopixel.NeoPixel(board.NEOPIXEL,
self._neopixel_count,
brightness=1,
pixel_order=neopixel.GRB)
self._keys = keypad.ShiftRegisterKeys(
clock=board.BUTTON_CLOCK,
data=board.BUTTON_OUT,
latch=board.BUTTON_LATCH,
key_count=8,
value_when_pressed=True,
)
self._buttons = KeyStates(self._keys)
self._light_sensor = analogio.AnalogIn(board.A7)
@property
def button(self) -> Type[tuple]:
"""The buttons on the board.
Example use:
.. code-block:: python
from adafruit_pybadger import pybadger
while True:
if pybadger.button.a:
print("Button A")
elif pybadger.button.b:
print("Button B")
elif pybadger.button.start:
print("Button start")
elif pybadger.button.select:
print("Button select")
"""
self._buttons.update()
button_values = tuple(
self._buttons.was_pressed(i) for i in range(self._keys.key_count))
return Buttons(
button_values[0],
button_values[1],
button_values[2],
button_values[3],
button_values[4],
button_values[5],
button_values[6],
button_values[7],
)
class PyGamer(PyBadgerBase):
"""Class that represents a single PyGamer."""
_audio_out = audioio.AudioOut
_neopixel_count = 5
def __init__(self):
super().__init__()
i2c = board.I2C()
int1 = digitalio.DigitalInOut(board.ACCELEROMETER_INTERRUPT)
try:
self._accelerometer = adafruit_lis3dh.LIS3DH_I2C(i2c,
address=0x19,
int1=int1)
except ValueError:
self._accelerometer = adafruit_lis3dh.LIS3DH_I2C(i2c, int1=int1)
# NeoPixels
self._neopixels = neopixel.NeoPixel(board.NEOPIXEL,
self._neopixel_count,
brightness=1,
pixel_order=neopixel.GRB)
self._keys = keypad.ShiftRegisterKeys(
clock=board.BUTTON_CLOCK,
data=board.BUTTON_OUT,
latch=board.BUTTON_LATCH,
key_count=4,
value_when_pressed=True,
)
self._buttons = KeyStates(self._keys)
self._pygamer_joystick_x = analogio.AnalogIn(board.JOYSTICK_X)
self._pygamer_joystick_y = analogio.AnalogIn(board.JOYSTICK_Y)
self._light_sensor = analogio.AnalogIn(board.A7)
@property
def button(self):
"""The buttons on the board.
Example use:
.. code-block:: python
from adafruit_pybadger import pybadger
while True:
if pybadger.button.a:
print("Button A")
elif pybadger.button.b:
print("Button B")
elif pybadger.button.start:
print("Button start")
elif pybadger.button.select:
print("Button select")
"""
self._buttons.update()
button_values = tuple(
self._buttons.was_pressed(i) for i in range(self._keys.key_count))
x, y = self.joystick
return Buttons(
button_values[0],
button_values[1],
button_values[2],
button_values[3],
x > 50000, # RIGHT
y > 50000, # DOWN
y < 15000, # UP
x < 15000, # LEFT
)
@property
def joystick(self):
"""The joystick on the PyGamer."""
x = self._pygamer_joystick_x.value
y = self._pygamer_joystick_y.value
return x, y
class PewPewM4(PyBadgerBase):
"""Class that represents a single Pew Pew M4."""
_audio_out = audioio.AudioOut
_neopixel_count = 0
def __init__(self):
super().__init__()
self._keys = keypad.Keys(
[
board.BUTTON_O,
board.BUTTON_X,
board.BUTTON_Z,
board.BUTTON_RIGHT,
board.BUTTON_DOWN,
board.BUTTON_UP,
board.BUTTON_LEFT,
],
value_when_pressed=False,
pull=True,
)
self._buttons = KeyStates(self._keys)
@property
def button(self):
"""The buttons on the board.
Example use:
.. code-block:: python
from adafruit_pybadger import pybadger
while True:
if pybadger.button.x:
print("Button X")
elif pybadger.button.o:
print("Button O")
"""
self._buttons.update()
button_values = tuple(
self._buttons.was_pressed(i) for i in range(self._keys.key_count)
)
return Buttons(
button_values[0],
button_values[1],
button_values[2],
button_values[3],
button_values[4],
button_values[5],
button_values[6],
)
@property
def _unsupported(self):
"""This feature is not supported on PewPew M4."""
raise NotImplementedError("This feature is not supported on PewPew M4.")
# The following is a list of the features available in other PyBadger modules but
# not available for CLUE. If called while using a CLUE, they will result in the
# NotImplementedError raised in the property above.
light = _unsupported
acceleration = _unsupported
pixels = _unsupported
