def main():
module_args = dict(vrf_name=dict(type='str', default='default'),
interface_list=dict(type='list', required=True),
state=dict(default='create',
choices=['create', 'delete', 'update']))
aruba_ansible_module = ArubaAnsibleModule(module_args)
vrf_name = aruba_ansible_module.module.params['vrf_name']
vrf_interface_list = aruba_ansible_module.module.params['interface_list']
state = aruba_ansible_module.module.params['state']
l3_interface = L3_Interface()
if state == 'create' or state == 'update':
update_type = 'insert'
else:
update_type = 'delete'
for interface_name in vrf_interface_list:
error = ("Interface {} is configured as L2 or L3 interface in VRF\n"
"Delete interface from configuration then recreate with "
"desired VRF".format(interface_name))
if not l3_interface.check_if_l3_interface_possible(
aruba_ansible_module, interface_name): # NOQA
aruba_ansible_module.module.fail_json(msg=error)
aruba_ansible_module = l3_interface.update_interface_vrf_details_from_vrf(
aruba_ansible_module, vrf_name, interface_name,
update_type) # NOQA
aruba_ansible_module.update_switch_config()
def main():
module_args = dict(interface=dict(type='str', required=True),
admin_state=dict(default='up', choices=['up', 'down']),
description=dict(type='str', default=None),
ipv4=dict(type='list', default=None),
ipv6=dict(type='list', default=None),
interface_qos_rate=dict(type='dict', default=None),
interface_qos_schedule_profile=dict(type='dict',
default=None),
vrf=dict(type='str', default=None),
ip_helper_address=dict(type='list', default=None),
state=dict(default='create',
choices=['create', 'delete', 'update']))
aruba_ansible_module = ArubaAnsibleModule(module_args)
interface_name = aruba_ansible_module.module.params['interface']
admin_state = aruba_ansible_module.module.params['admin_state']
description = aruba_ansible_module.module.params['description']
ipv4 = aruba_ansible_module.module.params['ipv4']
ipv6 = aruba_ansible_module.module.params['ipv6']
interface_qos_rate = aruba_ansible_module.module.params[
'interface_qos_rate'] # NOQA
interface_qos_schedule_profile = aruba_ansible_module.module.params[
'interface_qos_schedule_profile']
vrf = aruba_ansible_module.module.params['vrf']
ip_helper_address = aruba_ansible_module.module.params['ip_helper_address']
state = aruba_ansible_module.module.params['state']
l3_interface = L3_Interface()
interface = Interface()
if state == 'create':
aruba_ansible_module = l3_interface.create_l3_interface(
aruba_ansible_module, interface_name) # NOQA
if vrf is None:
vrf = "default"
if vrf is not None:
aruba_ansible_module = l3_interface.update_interface_vrf_details_from_l3(
aruba_ansible_module, vrf, interface_name) # NOQA
if state == 'delete':
aruba_ansible_module = l3_interface.delete_l3_interface(
aruba_ansible_module, interface_name)
if (state == 'update') or (state == 'create'):
if admin_state is not None:
aruba_ansible_module = interface.update_interface_admin_state(
aruba_ansible_module, interface_name, admin_state)
if description is not None:
aruba_ansible_module = interface.update_interface_description(
aruba_ansible_module, interface_name, description)
if vrf is not None and vrf != "default":
aruba_ansible_module = l3_interface.update_interface_vrf_details_from_l3(
aruba_ansible_module, vrf, interface_name) # NOQA
if interface_qos_rate is not None:
aruba_ansible_module = l3_interface.update_interface_qos_rate(
aruba_ansible_module, interface_name, interface_qos_rate)
if interface_qos_schedule_profile is not None:
aruba_ansible_module = l3_interface.update_interface_qos_profile(
aruba_ansible_module, interface_name,
interface_qos_schedule_profile) # NOQA
if ipv4 is not None:
aruba_ansible_module = l3_interface.update_interface_ipv4_address(
aruba_ansible_module, interface_name, ipv4) # NOQA
if ipv6 is not None:
aruba_ansible_module = l3_interface.update_interface_ipv6_address(
aruba_ansible_module, interface_name, ipv6) # NOQA
if ip_helper_address is not None:
if vrf is not None:
vrf = 'default'
aruba_ansible_module = l3_interface.update_interface_ip_helper_address(
aruba_ansible_module, vrf, interface_name,
ip_helper_address) # NOQA
aruba_ansible_module.update_switch_config()
def main():
module_args = dict(
vlan_id=dict(type='str', required=True),
admin_state=dict(type='str', required=False, choices=['up', 'down']),
state=dict(default='create', choices=['create', 'delete', 'update']),
ipv4=dict(type='list', default=None),
description=dict(type='str', default=None),
ipv6=dict(type='list', default=None),
vrf=dict(type='str', default=None),
ip_helper_address=dict(type='list', default=None),
active_gateway_ip=dict(type='str', default=None),
active_gateway_mac_v4=dict(type='str', default=None),
)
aruba_ansible_module = ArubaAnsibleModule(module_args)
vlan_id = aruba_ansible_module.module.params['vlan_id']
admin_state = aruba_ansible_module.module.params['admin_state']
ipv4 = aruba_ansible_module.module.params['ipv4']
ipv6 = aruba_ansible_module.module.params['ipv6']
vrf = aruba_ansible_module.module.params['vrf']
description = aruba_ansible_module.module.params['description']
ip_helper_address = aruba_ansible_module.module.params['ip_helper_address']
active_gateway_ip = aruba_ansible_module.module.params['active_gateway_ip']
active_gateway_mac_v4 = aruba_ansible_module.module.params[
'active_gateway_mac_v4'] # NOQA
state = aruba_ansible_module.module.params['state']
vlan = VLAN()
port = Port()
interface = Interface()
vlan_interface_id = "vlan" + vlan_id
if not vlan.check_vlan_exist(aruba_ansible_module, vlan_id):
aruba_ansible_module.module.fail_json(msg="VLAN {} does not exist. "
"VLAN needs to be created "
"before adding or deleting "
"interfaces".format(vlan_id))
if state == 'create':
aruba_ansible_module = port.create_port(aruba_ansible_module,
vlan_interface_id)
aruba_ansible_module = interface.create_interface(
aruba_ansible_module, vlan_interface_id)
if admin_state is None:
admin_state = 'up'
user_config = {
"admin": admin_state,
}
interface_fields = {
"name": vlan_interface_id,
"type": "vlan",
"user_config": user_config
}
aruba_ansible_module = interface.update_interface_fields(
aruba_ansible_module, vlan_interface_id, interface_fields) # NOQA
if vrf is not None:
vrf_name = vrf
else:
vrf_name = "default"
port_fields = {
"interfaces": [vlan_interface_id],
"vlan_tag": vlan_id,
"vrf": vrf_name,
"admin": admin_state
}
aruba_ansible_module = port.update_port_fields(aruba_ansible_module,
vlan_interface_id,
port_fields)
if (state == 'create') or (state == 'update'):
if not port.check_port_exists(aruba_ansible_module, vlan_interface_id):
aruba_ansible_module.module.fail_json(msg="VLAN interface does not"
" exist")
if admin_state is not None:
port_fields = {"admin": admin_state}
user_config = {"admin": admin_state}
interface_fields = {"user_config": user_config}
aruba_ansible_module = port.update_port_fields(aruba_ansible_module,
vlan_interface_id,
port_fields)
aruba_ansible_module = interface.update_interface_fields(
aruba_ansible_module, vlan_interface_id, interface_fields) # NOQA
if description is not None:
port_fields = {"description": description}
aruba_ansible_module = port.update_port_fields(
aruba_ansible_module, vlan_interface_id, port_fields) # NOQA
if ipv4 is not None:
l3_interface = L3_Interface()
aruba_ansible_module = l3_interface.update_interface_ipv4_address(
aruba_ansible_module, vlan_interface_id, ipv4) # NOQA
if ipv6 is not None:
l3_interface = L3_Interface()
aruba_ansible_module = l3_interface.update_interface_ipv6_address(
aruba_ansible_module, vlan_interface_id, ipv6) # NOQA
if ip_helper_address is not None:
l3_interface = L3_Interface()
if vrf is None:
vrf = "default"
aruba_ansible_module = l3_interface.update_interface_ip_helper_address(
aruba_ansible_module, vrf, vlan_interface_id,
ip_helper_address) # NOQA
if vrf is not None:
l3_interface = L3_Interface()
aruba_ansible_module = l3_interface.update_interface_vrf_details_from_l3(
aruba_ansible_module,
vrf,
vlan_interface_id,
update_type="insert") # NOQA
if (active_gateway_ip is not None) and (active_gateway_mac_v4 is None):
aruba_ansible_module.module.fail_json(
msg=
" Both active_gateway_ip and active_gateway_mac_v4 are required for configure active gateway."
) # NOQA
elif (active_gateway_ip is None) and (active_gateway_mac_v4
is not None): # NOQA
aruba_ansible_module.module.fail_json(
msg=
" Both active_gateway_ip and active_gateway_mac_v4 are required for configure active gateway."
) # NOQA
elif (active_gateway_ip is not None) and (active_gateway_mac_v4
is not None): # NOQA
port_fields = {
"vsx_virtual_ip4": active_gateway_ip,
"vsx_virtual_gw_mac_v4": active_gateway_mac_v4
}
aruba_ansible_module = port.update_port_fields(
aruba_ansible_module, vlan_interface_id, port_fields) # NOQA
if state == 'delete':
aruba_ansible_module = port.delete_port(aruba_ansible_module,
vlan_interface_id)
aruba_ansible_module = interface.delete_interface(
aruba_ansible_module, vlan_interface_id)
aruba_ansible_module.update_switch_config()
def main():
module_args = dict(
vlan_id=dict(type='str', required=True),
admin_state=dict(type='str', required=False, choices=['up', 'down']),
state=dict(default='create', choices=['create', 'delete', 'update']),
ipv4=dict(type='list', default=None),
description=dict(type='str', default=None),
ipv6=dict(type='list', default=None),
vrf=dict(type='str', default=None),
ip_helper_address=dict(type='list', default=None),
active_gateway_ip=dict(type='str', default=None),
active_gateway_mac_v4=dict(type='str', default=None),
)
# Version management
try:
from ansible.module_utils.aoscx_pyaoscx import Session
from pyaoscx.session import Session as Pyaoscx_Session
from pyaoscx.device import Device
USE_PYAOSCX_SDK = True
except ImportError:
USE_PYAOSCX_SDK = False
if USE_PYAOSCX_SDK:
from ansible.module_utils.basic import AnsibleModule
# ArubaModule
ansible_module = AnsibleModule(argument_spec=module_args,
supports_check_mode=True)
vlan_id = ansible_module.params['vlan_id']
admin_state = ansible_module.params['admin_state']
ipv4 = ansible_module.params['ipv4']
ipv6 = ansible_module.params['ipv6']
vrf = ansible_module.params['vrf']
description = ansible_module.params['description']
ip_helper_address = ansible_module.params['ip_helper_address'] # NOQA
active_gateway_ip = ansible_module.params['active_gateway_ip']
active_gateway_mac_v4 = ansible_module.params['active_gateway_mac_v4']
state = ansible_module.params['state']
# Set IP variable as empty arrays
if ipv4 == ['']:
ipv4 = []
if ipv6 == ['']:
ipv6 = []
# Session
session = Session(ansible_module)
# Set variables
vlan_interface_id = "vlan" + vlan_id
if admin_state is None:
admin_state = 'up'
if vrf is not None:
vrf_name = vrf
else:
vrf_name = "default"
# Set result var
result = dict(changed=False)
if ansible_module.check_mode:
ansible_module.exit_json(**result)
# Get session serialized information
session_info = session.get_session()
# Create pyaoscx.session object
s = Pyaoscx_Session.from_session(session_info['s'],
session_info['url'])
# Create a Device Object
device = Device(s)
if state == 'delete':
# Create Interface Object
vlan_interface = device.interface(vlan_interface_id)
# Delete it
vlan_interface.delete()
# Changed
result['changed'] = True
if state == 'create' or state == 'update':
# Create Interface with incoming attributes
vlan_interface = device.interface(vlan_interface_id)
# Verify if interface was create
if vlan_interface.was_modified():
# Changed
result['changed'] = True
# Configure SVI
# Verify if object was changed
modified_op = vlan_interface.configure_svi(vlan=int(vlan_id),
ipv4=ipv4,
ipv6=ipv6,
vrf=vrf,
description=description,
user_config=admin_state)
if active_gateway_ip is not None and active_gateway_mac_v4 is not None:
modified_op2 = vlan_interface.set_active_gateaway(
active_gateway_ip, active_gateway_mac_v4)
modified_op = modified_op2 or modified_op
if ip_helper_address is not None:
# Create DHCP_Relay object
dhcp_relay = device.dhcp_relay(vrf=vrf, port=vlan_interface_id)
# Add helper addresses
modified_dhcp_relay = dhcp_relay.add_ipv4_addresses(
ip_helper_address)
modified_op = modified_op or modified_dhcp_relay
if modified_op:
# Changed
result['changed'] = True
# Exit
ansible_module.exit_json(**result)
# Use Older version
else:
aruba_ansible_module = ArubaAnsibleModule(module_args)
vlan_id = aruba_ansible_module.module.params['vlan_id']
admin_state = aruba_ansible_module.module.params['admin_state']
ipv4 = aruba_ansible_module.module.params['ipv4']
ipv6 = aruba_ansible_module.module.params['ipv6']
vrf = aruba_ansible_module.module.params['vrf']
description = aruba_ansible_module.module.params['description']
ip_helper_address = aruba_ansible_module.module.params[
'ip_helper_address']
active_gateway_ip = aruba_ansible_module.module.params[
'active_gateway_ip']
active_gateway_mac_v4 = aruba_ansible_module.module.params[
'active_gateway_mac_v4'] # NOQA
state = aruba_ansible_module.module.params['state']
vlan = VLAN()
port = Port()
interface = Interface()
vlan_interface_id = "vlan" + vlan_id
if not vlan.check_vlan_exist(aruba_ansible_module, vlan_id):
aruba_ansible_module.module.fail_json(
msg="VLAN {id} does not exist. "
"VLAN needs to be created "
"before adding or deleting "
"interfaces"
"".format(id=vlan_id))
if state == 'create':
aruba_ansible_module = port.create_port(aruba_ansible_module,
vlan_interface_id)
aruba_ansible_module = interface.create_interface(
aruba_ansible_module, vlan_interface_id, type='vlan')
if admin_state is None:
admin_state = 'up'
user_config = {
"admin": admin_state,
}
interface_fields = {
"name": vlan_interface_id,
"type": "vlan",
"user_config": user_config
}
aruba_ansible_module = interface.update_interface_fields(
aruba_ansible_module, vlan_interface_id,
interface_fields) # NOQA
if vrf is not None:
vrf_name = vrf
else:
vrf_name = "default"
port_fields = {
"interfaces": [vlan_interface_id],
"vlan_tag": vlan_id,
"vrf": vrf_name,
"admin": admin_state
}
aruba_ansible_module = port.update_port_fields(
aruba_ansible_module, vlan_interface_id, port_fields)
if (state == 'create') or (state == 'update'):
if not port.check_port_exists(aruba_ansible_module,
vlan_interface_id):
aruba_ansible_module.module.fail_json(
msg="VLAN interface does not"
" exist")
if admin_state is not None:
port_fields = {"admin": admin_state}
user_config = {"admin": admin_state}
interface_fields = {"user_config": user_config}
aruba_ansible_module = port.update_port_fields(
aruba_ansible_module, vlan_interface_id, port_fields)
aruba_ansible_module = interface.update_interface_fields(
aruba_ansible_module, vlan_interface_id,
interface_fields) # NOQA
if description is not None:
port_fields = {"description": description}
aruba_ansible_module = port.update_port_fields(
aruba_ansible_module, vlan_interface_id,
port_fields) # NOQA
if ipv4 is not None:
l3_interface = L3_Interface()
aruba_ansible_module = l3_interface.update_interface_ipv4_address(
aruba_ansible_module, vlan_interface_id, ipv4) # NOQA
if ipv6 is not None:
l3_interface = L3_Interface()
aruba_ansible_module = l3_interface.update_interface_ipv6_address(
aruba_ansible_module, vlan_interface_id, ipv6) # NOQA
if ip_helper_address is not None:
l3_interface = L3_Interface()
if vrf is None:
vrf = "default"
aruba_ansible_module = l3_interface.update_interface_ip_helper_address(
aruba_ansible_module, vrf, vlan_interface_id,
ip_helper_address) # NOQA
if vrf is not None:
l3_interface = L3_Interface()
aruba_ansible_module = l3_interface.update_interface_vrf_details_from_l3(
aruba_ansible_module,
vrf,
vlan_interface_id,
update_type="insert") # NOQA
if (active_gateway_ip
is not None) and (active_gateway_mac_v4 is None):
aruba_ansible_module.module.fail_json(
msg=
" Both active_gateway_ip and active_gateway_mac_v4 are required for configure active gateway."
) # NOQA
elif (active_gateway_ip is None) and (active_gateway_mac_v4
is not None): # NOQA
aruba_ansible_module.module.fail_json(
msg=
" Both active_gateway_ip and active_gateway_mac_v4 are required for configure active gateway."
) # NOQA
elif (active_gateway_ip is not None) and (active_gateway_mac_v4
is not None): # NOQA
port_fields = {
"vsx_virtual_ip4": active_gateway_ip,
"vsx_virtual_gw_mac_v4": active_gateway_mac_v4
}
aruba_ansible_module = port.update_port_fields(
aruba_ansible_module, vlan_interface_id,
port_fields) # NOQA
if state == 'delete':
aruba_ansible_module = port.delete_port(aruba_ansible_module,
vlan_interface_id)
aruba_ansible_module = interface.delete_interface(
aruba_ansible_module, vlan_interface_id, type='vlan')
aruba_ansible_module.update_switch_config()
def main():
module_args = dict(interface=dict(type='str', required=True),
description=dict(type='str', default=None),
ipv4=dict(type='list', default=None),
ipv6=dict(type='list', default=None),
interface_qos_schedule_profile=dict(type='dict',
default=None),
interface_qos_rate=dict(type='dict', default=None),
vrf=dict(type='str', default=None),
ip_helper_address=dict(type='list', default=None),
state=dict(default='create',
choices=['create', 'delete', 'update']))
if USE_PYAOSCX_SDK:
ansible_module = AnsibleModule(argument_spec=module_args,
supports_check_mode=True)
interface_name = ansible_module.params['interface']
description = ansible_module.params['description']
ipv4 = ansible_module.params['ipv4']
ipv6 = ansible_module.params['ipv6']
vrf = ansible_module.params['vrf']
ip_helper_addresses = ansible_module.params['ip_helper_address']
state = ansible_module.params['state']
# Set IP variable as empty arrays
if ipv4 == ['']:
ipv4 = []
if ipv6 == ['']:
ipv6 = []
# Set Variables
if vrf is None:
vrf = 'default'
# Set result var
result = dict(changed=False)
if ansible_module.check_mode:
ansible_module.exit_json(**result)
session = get_pyaoscx_session(ansible_module)
device = Device(session)
if state == 'delete':
# Create Interface Object
interface = device.interface(interface_name)
# Delete it
interface.delete()
# Changed
result['changed'] = True
else:
# Create Interface Object
interface = device.interface(interface_name)
# Verify if interface was create
if interface.was_modified():
# Changed
result['changed'] = True
# Configure L4
# Verify if object was changed
modified_op = interface.configure_l3(ipv4=ipv4,
ipv6=ipv6,
vrf=vrf,
description=description)
if ip_helper_addresses is not None:
# Create DHCP_Relay object
dhcp_relay = device.dhcp_relay(vrf=vrf, port=interface_name)
# Add helper addresses
dhcp_relay.add_ipv4_addresses(ip_helper_addresses)
if modified_op:
# Changed
result['changed'] = True
# Exit
ansible_module.exit_json(**result)
# Use Older version
else:
aruba_ansible_module = ArubaAnsibleModule(module_args)
interface_name = aruba_ansible_module.module.params['interface']
admin_state = aruba_ansible_module.module.params['admin_state']
description = aruba_ansible_module.module.params['description']
ipv4 = aruba_ansible_module.module.params['ipv4']
ipv6 = aruba_ansible_module.module.params['ipv6']
interface_qos_rate = aruba_ansible_module.module.params[
'interface_qos_rate'] # NOQA
interface_qos_schedule_profile = aruba_ansible_module.module.params[
'interface_qos_schedule_profile']
vrf = aruba_ansible_module.module.params['vrf']
ip_helper_address = aruba_ansible_module.module.params[
'ip_helper_address']
state = aruba_ansible_module.module.params['state']
l3_interface = L3_Interface()
interface = Interface()
if state == 'create':
aruba_ansible_module = l3_interface.create_l3_interface(
aruba_ansible_module, interface_name) # NOQA
if vrf is None:
vrf = "default"
if vrf is not None:
aruba_ansible_module = l3_interface.update_interface_vrf_details_from_l3(
aruba_ansible_module, vrf, interface_name) # NOQA
if state == 'delete':
aruba_ansible_module = l3_interface.delete_l3_interface(
aruba_ansible_module, interface_name)
if (state == 'update') or (state == 'create'):
if admin_state is not None:
aruba_ansible_module = interface.update_interface_admin_state(
aruba_ansible_module, interface_name, admin_state)
if description is not None:
aruba_ansible_module = interface.update_interface_description(
aruba_ansible_module, interface_name, description)
if vrf is not None and vrf != "default":
aruba_ansible_module = l3_interface.update_interface_vrf_details_from_l3(
aruba_ansible_module, vrf, interface_name) # NOQA
if interface_qos_rate is not None:
aruba_ansible_module = l3_interface.update_interface_qos_rate(
aruba_ansible_module, interface_name, interface_qos_rate)
if interface_qos_schedule_profile is not None:
aruba_ansible_module = l3_interface.update_interface_qos_profile(
aruba_ansible_module, interface_name,
interface_qos_schedule_profile) # NOQA
if ipv4 is not None:
aruba_ansible_module = l3_interface.update_interface_ipv4_address(
aruba_ansible_module, interface_name, ipv4) # NOQA
if ipv6 is not None:
aruba_ansible_module = l3_interface.update_interface_ipv6_address(
aruba_ansible_module, interface_name, ipv6) # NOQA
if ip_helper_address is not None:
if vrf is not None:
vrf = 'default'
aruba_ansible_module = l3_interface.update_interface_ip_helper_address(
aruba_ansible_module, vrf, interface_name,
ip_helper_address) # NOQA
aruba_ansible_module.update_switch_config()