Beispiel #1
1
def load(module, commands, result):
    candidate = NetworkConfig(indent=2, contents='\n'.join(commands))
    config = get_config(module)
    configobjs = candidate.difference(config)

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')
        result['updates'] = commands
        if not module.check_mode:
            load_config(module, commands, result)
        result['changed'] = True
Beispiel #2
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']

    candidate = get_candidate(module)

    if match != 'none':
        config = get_running_config(module)
        path = module.params['parents']
        configobjs = candidate.difference(config,
                                          match=match,
                                          replace=replace,
                                          path=path)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

        result['commands'] = commands
        result['updates'] = commands

        if not module.check_mode:
            load_config(module, commands)

        result['changed'] = True
Beispiel #3
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']

    candidate = get_candidate(module)

    if match != 'none':
        config = get_running_config(module)
        path = module.params['parents']
        configobjs = candidate.difference(config, match=match, replace=replace, path=path)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

        result['commands'] = commands
        result['updates'] = commands

        if not module.check_mode:
            load_config(module, commands)

        result['changed'] = True
Beispiel #4
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    replace_config = replace == 'config'
    path = module.params['parents']
    comment = module.params['comment']
    check_mode = module.check_mode

    candidate = get_candidate(module)

    if match != 'none' and replace != 'config':
        contents = get_running_config(module)
        configobj = NetworkConfig(contents=contents, indent=1)
        commands = candidate.difference(configobj, path=path, match=match,
                                          replace=replace)
    else:
        commands = candidate.items

    if commands:
        commands = dumps(commands, 'commands').split('\n')

        if any((module.params['lines'], module.params['src'])):
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

            result['commands'] = commands

        diff = load_config(module, commands, not check_mode,
                           replace_config, comment)
        if diff:
            result['diff'] = dict(prepared=diff)
            result['changed'] = True
Beispiel #5
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']

    candidate = get_candidate(module)

    if match != 'none' and replace != 'config':
        config_text = get_config(module)
        config = NetworkConfig(indent=3, contents=config_text)
        configobjs = candidate.difference(config, match=match, replace=replace)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

        result['commands'] = commands

        replace = module.params['replace'] == 'config'
        commit = not module.check_mode

        response = load_config(module, commands, replace=replace, commit=commit)
        if 'diff' in response:
            result['diff'] = {'prepared': response['diff']}
        if 'session' in response:
            result['session'] = response['session']

        result['changed'] = True
Beispiel #6
0
def run(module, result):
    match = module.params['match']

    candidate = get_candidate(module)

    if match != 'none':
        config = get_config(module, result)
        configobjs = candidate.difference(config)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'lines')
        commands = sanitize_config(commands.split('\n'))

        result['updates'] = commands

        # check if creating checkpoints is possible
        if not module.connection.rollback_enabled:
            warn = 'Cannot create checkpoint.  Please enable this feature ' \
                   'using the sros_rollback module.  Automatic rollback ' \
                   'will be disabled'
            result['warnings'].append(warn)

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            module.config.load_config(commands)
        result['changed'] = True

    if module.params['save']:
        if not module.check_mode:
            module.config.save_config()
        result['changed'] = True
Beispiel #7
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']

    candidate = get_candidate(module)

    if match != 'none' and replace != 'config':
        config = get_config(module)
        configobjs = candidate.difference(config, match=match, replace=replace)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

            result['updates'] = commands

        module.log('commands: %s' % commands)
        load_config(module, commands, result)

    if module.params['save']:
        if not module.check_mode:
            module.config.save_config()
        result['changed'] = True
Beispiel #8
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    path = module.params['parents']

    candidate = get_candidate(module)

    if match != 'none' and replace != 'config':
        config = get_config(module, result)
        configobjs = candidate.difference(config, path=path, match=match,
                                          replace=replace)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

            result['updates'] = commands

        load_config(module, commands, result)
Beispiel #9
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']

    candidate = get_candidate(module)

    if match != 'none' and replace != 'config':
        config = get_config(module)
        configobjs = candidate.difference(config, match=match, replace=replace)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

            result['updates'] = commands

        module.log('commands: %s' % commands)
        load_config(module, commands, result)

    if module.params['save']:
        if not module.check_mode:
            module.config.save_config()
        result['changed'] = True
Beispiel #10
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']

    candidate = get_candidate(module)

    if match != 'none':
        config = get_config(module, result)
        configobjs = candidate.difference(config, match=match, replace=replace)
    else:
        config = None
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands')

        if module.params['before']:
            commands[:0] = module.params['before']

        if module.params['after']:
            commands.extend(module.params['after'])

        # send the configuration commands to the device and merge
        # them with the current running config
        load_config(module, commands, result)

    if module.params['save'] and not module.check_mode:
        module.config.save_config()
Beispiel #11
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    update = module.params['update']
    path = module.params['parents']

    candidate = get_candidate(module)

    if match != 'none' and update != 'replace':
        config = get_config(module, result)
        configobjs = candidate.difference(config, path=path, match=match,
                                          replace=replace)
    else:
        config = None
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['before']:
            commands[:0] = module.params['before']

        if module.params['after']:
            commands.extend(module.params['after'])

        result['updates'] = commands

        if update != 'check':
            load_config(module, commands, result)
Beispiel #12
0
def run(module, result):
    match = module.params['match']

    candidate = get_candidate(module)

    if match != 'none':
        config = get_config(module, result)
        configobjs = candidate.difference(config)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'lines')
        commands = sanitize_config(commands.split('\n'))

        result['updates'] = commands

        # check if creating checkpoints is possible
        if not module.connection.rollback_enabled:
            warn = 'Cannot create checkpoint.  Please enable this feature ' \
                   'using the sros_rollback module.  Automatic rollback ' \
                   'will be disabled'
            result['warnings'].append(warn)

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            module.config.load_config(commands)
        result['changed'] = True

    if module.params['save']:
        if not module.check_mode:
            module.config.save_config()
        result['changed'] = True
Beispiel #13
0
def main():
    """ main entry point for module execution
    """

    argument_spec = dict(
        src=dict(required=True),
        force=dict(default=False, type='bool'),
        include_defaults=dict(default=False, type='bool'),
        backup=dict(default=False, type='bool'),
        replace=dict(default=False, type='bool'),
        config=dict()
    )

    argument_spec.update(eapi.eapi_argument_spec)

    mutually_exclusive = [('config', 'backup'), ('config', 'force')]

    cls = get_ansible_module()

    module = cls(argument_spec=argument_spec,
                 mutually_exclusive=mutually_exclusive,
                 supports_check_mode=True)

    warnings = check_args(module)

    result = {'changed': False}
    if warnings:
        result['warnings'] = warnings

    src = module.params['src']
    candidate = NetworkConfig(contents=src, indent=3)

    if module.params['backup']:
        result['__backup__'] = get_config()

    if not module.params['force']:
        contents = get_current_config(module)
        configobj = NetworkConfig(contents=contents, indent=3)
        commands = candidate.difference(configobj)
        commands = dumps(commands, 'commands').split('\n')
        commands = [str(c).strip() for c in commands if c]
    else:
        commands = [c.strip() for c in str(candidate).split('\n')]

    # FIXME not implemented yet!!
    if replace:
        if module.params['transport'] == 'cli':
            module.fail_json(msg='config replace is only supported over eapi')
        commands = str(candidate).split('\n')

    if commands:
        commands = filter_exit(commands)
        commit = not module.check_mode
        load_config(commands, commit=commit)
        result['changed'] = True

    result['updates'] = commands

    module.exit_json(**result)
Beispiel #14
0
 def get_section(self, path):
     try:
         section = self.get_section_objects(path)
         if self._device_os == 'junos':
             return dumps(section, output='lines')
         return self.to_block(section)
     except ValueError:
         return list()
 def get_section(self, path):
     try:
         section = self.get_section_objects(path)
         if self._device_os == 'junos':
             return dumps(section, output='lines')
         return self.to_block(section)
     except ValueError:
         return list()
Beispiel #16
0
def main():
    """ main entry point for module execution
    """

    argument_spec = dict(src=dict(required=True),
                         force=dict(default=False, type='bool'),
                         include_defaults=dict(default=False, type='bool'),
                         backup=dict(default=False, type='bool'),
                         replace=dict(default=False, type='bool'),
                         config=dict())

    mutually_exclusive = [('config', 'backup'), ('config', 'force')]

    module = NetworkModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           supports_check_mode=True)

    replace = module.params['replace']

    commands = list()
    running = None

    result = dict(changed=False)

    candidate = NetworkConfig(contents=module.params['src'], indent=3)

    if replace:
        if module.params['transport'] == 'cli':
            module.fail_json(msg='config replace is only supported over eapi')
        commands = str(candidate).split('\n')
    else:
        contents = get_config(module)
        if contents:
            running = NetworkConfig(contents=contents, indent=3)
            result['_backup'] = contents

        if not module.params['force']:
            commands = candidate.difference((running or list()))
            commands = dumps(commands, 'commands').split('\n')
            commands = [str(c) for c in commands if c]
        else:
            commands = str(candidate).split('\n')

    commands = filter_exit(commands)
    if commands:
        if not module.check_mode:
            response = module.config.load_config(commands,
                                                 replace=replace,
                                                 session='eos_template',
                                                 commit=True)

            module.cli('no configure session eos_template')
            result['responses'] = response
        result['changed'] = True

    result['updates'] = commands
    module.exit_json(**result)
Beispiel #17
0
def main():
    """ main entry point for module execution
    """

    argument_spec = dict(
        src=dict(required=True),
        force=dict(default=False, type='bool'),
        include_defaults=dict(default=False, type='bool'),
        backup=dict(default=False, type='bool'),
        replace=dict(default=False, type='bool'),
        config=dict()
    )

    mutually_exclusive = [('config', 'backup'), ('config', 'force')]

    module = NetworkModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           supports_check_mode=True)

    replace = module.params['replace']

    commands = list()
    running = None

    result = dict(changed=False)

    candidate = NetworkConfig(contents=module.params['src'], indent=3)

    if replace:
        if module.params['transport'] == 'cli':
            module.fail_json(msg='config replace is only supported over eapi')
        commands = str(candidate).split('\n')
    else:
        contents = get_config(module)
        if contents:
            running = NetworkConfig(contents=contents, indent=3)
            result['_backup'] = contents

        if not module.params['force']:
            commands = candidate.difference((running or list()))
            commands = dumps(commands, 'commands').split('\n')
            commands = [str(c) for c in commands if c]
        else:
            commands = str(candidate).split('\n')

    commands = filter_exit(commands)
    if commands:
        if not module.check_mode:
            response = module.config.load_config(commands, replace=replace,
                                                 commit=True)
            result['responses'] = response
        result['changed'] = True

    result['updates'] = commands
    module.exit_json(**result)
Beispiel #18
0
def main():
    """ main entry point for module execution
    """

    argument_spec = dict(src=dict(required=True),
                         force=dict(default=False, type='bool'),
                         include_defaults=dict(default=False, type='bool'),
                         backup=dict(default=False, type='bool'),
                         replace=dict(default=False, type='bool'),
                         config=dict())

    argument_spec.update(eos_argument_spec)

    mutually_exclusive = [('config', 'backup'), ('config', 'force')]

    module = AnsibleModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           supports_check_mode=True)

    warnings = list()
    check_args(module, warnings)

    result = {'changed': False}
    if warnings:
        result['warnings'] = warnings

    src = module.params['src']
    candidate = NetworkConfig(contents=src, indent=3)

    if module.params['backup']:
        result['__backup__'] = get_config(module)

    if not module.params['force']:
        contents = get_current_config(module)
        configobj = NetworkConfig(contents=contents, indent=3)
        commands = candidate.difference(configobj)
        commands = dumps(commands, 'commands').split('\n')
        commands = [str(c).strip() for c in commands if c]
    else:
        commands = [c.strip() for c in str(candidate).split('\n')]

    #commands = str(candidate).split('\n')

    if commands:
        commands = filter_exit(commands)
        commit = not module.check_mode
        replace = module.params['replace'] or False
        load_config(module, commands, commit=commit, replace=replace)
        result['changed'] = True

    result['commands'] = commands
    result['updates'] = commands

    module.exit_json(**result)
Beispiel #19
0
def load(module, commands, result):
    candidate = NetworkConfig(indent=2, contents='\n'.join(commands))
    config = get_config(module)
    configobjs = candidate.difference(config)

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')
        result['updates'] = commands
        if not module.check_mode:
            load_config(module, commands, result)
        result['changed'] = True
Beispiel #20
0
def load(module, instance, commands, result):
    candidate = NetworkConfig(indent=3)
    candidate.add(commands, parents=['management api http-commands'])

    config = get_config(module)
    configobjs = candidate.difference(config)

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')
        result['updates'] = commands
        load_config(module, instance, commands, result)
Beispiel #21
0
def load(module, instance, commands, result):
    candidate = NetworkConfig(indent=3)
    candidate.add(commands, parents=['management api http-commands'])

    config = get_config(module)
    configobjs = candidate.difference(config)

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')
        result['updates'] = commands
        load_config(module, instance, commands, result)
def main():

    argument_spec = dict(lines=dict(aliases=['commands'],
                                    required=True,
                                    type='list'),
                         before=dict(type='list'),
                         after=dict(type='list'),
                         match=dict(default='line',
                                    choices=['line', 'strict', 'exact']),
                         replace=dict(default='line',
                                      choices=['line', 'block']),
                         force=dict(default=False, type='bool'),
                         config=dict())

    argument_spec.update(asa_argument_spec)

    module = AnsibleModule(argument_spec=argument_spec,
                           supports_check_mode=True)

    lines = module.params['lines']

    result = {'changed': False}

    candidate = NetworkConfig(indent=1)
    candidate.add(lines)

    acl_name = parse_acl_name(module)

    if not module.params['force']:
        contents = get_acl_config(module, acl_name)
        config = NetworkConfig(indent=1, contents=contents)

        commands = candidate.difference(config)
        commands = dumps(commands, 'commands').split('\n')
        commands = [str(c) for c in commands if c]
    else:
        commands = str(candidate).split('\n')

    if commands:
        if module.params['before']:
            commands[:0] = module.params['before']

        if module.params['after']:
            commands.extend(module.params['after'])

        if not module.check_mode:
            load_config(module, commands)

        result['changed'] = True

    result['updates'] = commands

    module.exit_json(**result)
Beispiel #23
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    update = module.params['update']

    candidate = get_candidate(module)

    if match != 'none':
        config = get_config(module, result)
        path = module.params['parents']
        configobjs = candidate.difference(config,
                                          path=path,
                                          match=match,
                                          replace=replace)
    else:
        config = None
        configobjs = candidate.items

    if module.params['backup']:
        backup_config(module, result)

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['before']:
            commands[:0] = module.params['before']

        if module.params['after']:
            commands.extend(module.params['after'])

        result['updates'] = commands

        # create a checkpoint of the current running config in case
        # there is a problem loading the candidate config
        checkpoint = 'ansible_%s' % int(time.time())
        module.cli(['checkpoint %s' % checkpoint], output='text')
        result['__checkpoint__'] = checkpoint
        module.log('create checkpoint %s' % checkpoint)

        # if the update mode is set to check just return
        # and do not try to load into the system
        if update != 'check':
            load_config(module, commands, result)

        # remove the checkpoint file used to restore the config
        # in case of an error
        if not module.check_mode:
            module.log('remove checkpoint %s' % checkpoint)
            module.cli('no checkpoint %s' % checkpoint, output='text')

    if module.params['save'] and not module.check_mode:
        module.config.save_config()
        result['changed'] = True
Beispiel #24
0
def main():

    argument_spec = dict(
        lines=dict(aliases=['commands'], required=True, type='list'),
        before=dict(type='list'),
        after=dict(type='list'),
        match=dict(default='line', choices=['line', 'strict', 'exact']),
        replace=dict(default='line', choices=['line', 'block']),
        force=dict(default=False, type='bool'),
        config=dict()
    )

    module = NetworkModule(argument_spec=argument_spec,
                           supports_check_mode=True)

    lines = module.params['lines']

    before = module.params['before']
    after = module.params['after']

    match = module.params['match']
    replace = module.params['replace']

    result = dict(changed=False)

    candidate = NetworkConfig(indent=1)
    candidate.add(lines)

    acl_name = parse_acl_name(module)

    if not module.params['force']:
        contents = get_config(module, acl_name)
        config = NetworkConfig(indent=1, contents=contents)

        commands = candidate.difference(config)
        commands = dumps(commands, 'commands').split('\n')
        commands = [str(c) for c in commands if c]
    else:
        commands = str(candidate).split('\n')

    if commands:
        if not module.check_mode:
            response = module.config(commands)
            result['responses'] = response
        result['changed'] = True

    result['updates'] = commands

    module.exit_json(**result)
Beispiel #25
0
def main():
    """ main entry point for module execution
    """
    argument_spec = dict(
        src=dict(),
        force=dict(default=False, type='bool'),
        include_defaults=dict(default=True, type='bool'),
        backup=dict(default=False, type='bool'),
        config=dict(),
    )

    argument_spec.update(ios_cli.ios_cli_argument_spec)

    mutually_exclusive = [('config', 'backup'), ('config', 'force')]

    cls = get_ansible_module()
    module = cls(argument_spec=argument_spec,
                 mutually_exclusive=mutually_exclusive,
                 supports_check_mode=True)

    warnings = list()
    check_args(module, warnings)

    candidate = NetworkConfig(contents=module.params['src'], indent=1)

    result = {'changed': False}
    if warnings:
        result['warnings'] = warnings

    if module.params['backup']:
        result['__backup__'] = get_config(module=module)

    if not module.params['force']:
        contents = get_current_config(module)
        configobj = NetworkConfig(contents=contents, indent=1)
        commands = candidate.difference(configobj)
        commands = dumps(commands, 'commands').split('\n')
        commands = [str(c).strip() for c in commands if c]
    else:
        commands = [c.strip() for c in str(candidate).split('\n')]

    if commands:
        if not module.check_mode:
            load_config(module, commands)
        result['changed'] = True

    result['updates'] = commands

    module.exit_json(**result)
Beispiel #26
0
def main():
    """ main entry point for module execution
    """
    argument_spec = dict(
        src=dict(),
        force=dict(default=False, type='bool'),
        include_defaults=dict(default=True, type='bool'),
        backup=dict(default=False, type='bool'),
        config=dict(),
    )

    # Removed the use of provider arguments in 2.3 due to network_cli
    # connection plugin.  To be removed in 2.5
    argument_spec.update(_transitional_argument_spec())

    mutually_exclusive = [('config', 'backup'), ('config', 'force')]

    module = LocalAnsibleModule(argument_spec=argument_spec,
                                mutually_exclusive=mutually_exclusive,
                                supports_check_mode=True)

    warnings = check_args(module)

    result = dict(changed=False, warnings=warnings)

    candidate = NetworkConfig(contents=module.params['src'], indent=1)

    result = {'changed': False}

    if module.params['backup']:
        result['__backup__'] = get_config()

    if not module.params['force']:
        contents = get_current_config(module)
        configobj = NetworkConfig(contents=contents, indent=1)
        commands = candidate.difference(configobj)
        commands = dumps(commands, 'commands').split('\n')
        commands = [str(c).strip() for c in commands if c]
    else:
        commands = [c.strip() for c in str(candidate).split('\n')]

    if commands:
        if not module.check_mode:
            load_config(commands)
        result['changed'] = True

    result['updates'] = commands

    module.exit_json(**result)
Beispiel #27
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    path = module.params['parents']

    candidate, want_banners = get_candidate(module)

    if match != 'none':
        config, have_banners = get_config(module, result)
        path = module.params['parents']
        configobjs = candidate.difference(config,
                                          path=path,
                                          match=match,
                                          replace=replace)
    else:
        configobjs = candidate.items
        have_banners = {}

    banners = diff_banners(want_banners, have_banners)

    if configobjs or banners:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

        result['updates'] = commands
        result['banners'] = banners

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            if commands:
                module.config(commands)
            if banners:
                load_banners(module, banners)

        result['changed'] = True

    if module.params['save']:
        if not module.check_mode:
            module.config.save_config()
        result['changed'] = True
Beispiel #28
0
def present(module, result):
    match = module.params['match']

    candidate = get_candidate(module)

    if match != 'none':
        config = get_config(module, result)
        configobjs = candidate.difference(config)
    else:
        config = None
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'lines')
        commands = sanitize_config(commands.split('\n'))

        result['updates'] = commands

        if module.params['update'] != 'check':
            # check if creating checkpoints is possible
            config = module.config.get_config()
            if 'rollback-location' not in config:
                warn = 'Cannot create checkpoint.  Please enable this feature ' \
                        'with "configure system rollback rollback-location" ' \
                        'command.  Automatic rollback will be  disabled'
                result['warnings'].append(warn)
                result['__checkpoint__'] = False
            else:
                result['__checkpoint__'] = True

            # create a config checkpoint prior to trying to
            # configure the device
            if result.get('__checkpoint__'):
                module.cli(['admin rollback save'])

            # send the configuration commands to the device and merge
            # them with the current running config
            if not module.check_mode:
                module.config(commands)
            result['changed'] = True

            # remove checkpoint from system
            if result.get('__checkpoint__'):
                module.cli(['admin rollback delete latest-rb'])

    if module.params['save'] and not module.check_mode:
        module.config.save_config()
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    path = module.params['parents']

    candidate = get_candidate(module)

    if match != 'none':
        config = get_config(module, result)
        path = module.params['parents']
        configobjs = candidate.difference(config,
                                          path=path,
                                          match=match,
                                          replace=replace)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

            result['updates'] = commands

        # create a backup copy of the current running-config on
        # device flash drive
        backup_config(module)

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            module.config(commands)
        result['changed'] = True

        # remove the backup copy of the running-config since its
        # no longer needed
        module.cli('delete /force flash:/ansible-rollback')

    if module.params['save']:
        if not module.check_mode:
            module.config.save_config()
        result['changed'] = True
Beispiel #30
0
def load_config(module, commands, result):
    candidate = NetworkConfig(device_os='sros', contents='\n'.join(commands))
    config = get_config(module)
    configobjs = candidate.difference(config)

    if configobjs:
        commands = dumps(configobjs, 'lines')
        commands = sanitize_config(commands.split('\n'))

        result['updates'] = commands

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            module.config(commands)

        result['changed'] = True
Beispiel #31
0
def load_config(module, commands, result):
    candidate = NetworkConfig(device_os='sros', contents='\n'.join(commands))
    config = get_config(module)
    configobjs = candidate.difference(config)

    if configobjs:
        commands = dumps(configobjs, 'lines')
        commands = sanitize_config(commands.split('\n'))

        result['updates'] = commands

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            module.config(commands)

        result['changed'] = True
Beispiel #32
0
def main():
    """ main entry point for module execution
    """
    argument_spec = dict(
        rollback_location=dict(),

        local_max_checkpoints=dict(type='int'),
        remote_max_checkpoints=dict(type='int'),

        rescue_location=dict(),

        state=dict(default='present', choices=['present', 'absent'])
    )

    argument_spec.update(sros_argument_spec)

    module = AnsibleModule(argument_spec=argument_spec,
                           supports_check_mode=True)

    state = module.params['state']

    result = dict(changed=False)

    commands = list()
    invoke(state, module, commands)

    candidate = NetworkConfig(indent=4, contents='\n'.join(commands))
    config = get_device_config(module)
    configobjs = candidate.difference(config)

    if configobjs:
        #commands = dumps(configobjs, 'lines')
        commands = dumps(configobjs, 'commands')
        commands = sanitize_config(commands.split('\n'))

        result['updates'] = commands
        result['commands'] = commands

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            load_config(module, commands)

        result['changed'] = True

    module.exit_json(**result)
Beispiel #33
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    path = module.params['parents']

    candidate, want_banners = get_candidate(module)

    if match != 'none':
        config, have_banners = get_config(module, result)
        path = module.params['parents']
        configobjs = candidate.difference(config, path=path,match=match,
                                          replace=replace)
    else:
        configobjs = candidate.items
        have_banners = {}

    banners = diff_banners(want_banners, have_banners)

    if configobjs or banners:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

        result['updates'] = commands
        result['banners'] = banners

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            if commands:
                module.config(commands)
            if banners:
                load_banners(module, banners)

        result['changed'] = True

    if module.params['save']:
        if not module.check_mode:
            module.config.save_config()
        result['changed'] = True
Beispiel #34
0
def main():
    """ main entry point for module execution
    """
    argument_spec = dict(
        src=dict(),
        force=dict(default=False, type='bool'),
        include_defaults=dict(default=True, type='bool'),
        backup=dict(default=False, type='bool'),
        config=dict(),
    )

    argument_spec.update(nxos_argument_spec)

    mutually_exclusive = [('config', 'backup'), ('config', 'force')]

    module = AnsibleModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           supports_check_mode=True)

    result = dict(changed=False)

    candidate = NetworkConfig(contents=module.params['src'], indent=2)

    contents = get_current_config(module)
    if contents:
        config = NetworkConfig(contents=contents, indent=2)
        result['__backup__'] = str(contents)

    if not module.params['force']:
        commands = candidate.difference(config)
        commands = dumps(commands, 'commands').split('\n')
        commands = [str(c) for c in commands if c]
    else:
        commands = str(candidate).split('\n')

    if commands:
        if not module.check_mode:
            load_config(module, commands)
        result['changed'] = True

    result['updates'] = commands
    result['commands'] = commands

    module.exit_json(**result)
Beispiel #35
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    path = module.params['parents']
    configobjs = None

    candidate = get_candidate(module)
    if match != 'none':
        contents = module.params['config']
        if not contents:
            contents = get_config(module)
        config = NetworkConfig(indent=1, contents=contents)
        configobjs = candidate.difference(config,
                                          path=path,
                                          match=match,
                                          replace=replace)

    else:
        configobjs = candidate.items
    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

        result['updates'] = commands

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            load_config(module, commands)
        result['changed'] = True

    if result['changed'] or module.params['save_when'] == 'always':
        result['changed'] = True
        if not module.check_mode:
            cmd = {'command': 'write memory'}
            run_commands(module, [cmd])
Beispiel #36
0
def main():
    """ main entry point for module execution
    """
    argument_spec = dict(rollback_location=dict(),
                         local_max_checkpoints=dict(type='int'),
                         remote_max_checkpoints=dict(type='int'),
                         rescue_location=dict(),
                         state=dict(default='present',
                                    choices=['present', 'absent']))

    argument_spec.update(sros_argument_spec)

    module = AnsibleModule(argument_spec=argument_spec,
                           supports_check_mode=True)

    state = module.params['state']

    result = dict(changed=False)

    commands = list()
    invoke(state, module, commands)

    candidate = NetworkConfig(indent=4, contents='\n'.join(commands))
    config = get_device_config(module)
    configobjs = candidate.difference(config)

    if configobjs:
        #commands = dumps(configobjs, 'lines')
        commands = dumps(configobjs, 'commands')
        commands = sanitize_config(commands.split('\n'))

        result['updates'] = commands
        result['commands'] = commands

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            load_config(module, commands)

        result['changed'] = True

    module.exit_json(**result)
Beispiel #37
0
def main():
    """ main entry point for module execution
    """

    argument_spec = dict(
        src=dict(),
        force=dict(default=False, type='bool'),
        backup=dict(default=False, type='bool'),
        config=dict(),
    )

    mutually_exclusive = [('config', 'backup'), ('config', 'force')]

    module = NetworkModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           supports_check_mode=True)

    result = dict(changed=False)

    candidate = NetworkConfig(contents=module.params['src'], indent=1)

    contents = get_config(module)

    if contents:
        config = NetworkConfig(contents=contents[0], indent=1)
        result['_backup'] = contents[0]

    commands = list()
    if not module.params['force']:
        commands = dumps(candidate.difference(config), 'commands')
    else:
        commands = str(candidate)

    if commands:
        commands = commands.split('\n')
        if not module.check_mode:
            response = module.config(commands)
            result['responses'] = response
        result['changed'] = True

    result['updates'] = commands
    module.exit_json(**result)
Beispiel #38
0
def main():
    """ main entry point for module execution
    """

    argument_spec = dict(
        src=dict(),
        force=dict(default=False, type='bool'),
        include_defaults=dict(default=True, type='bool'),
        backup=dict(default=False, type='bool'),
        config=dict(),
    )

    mutually_exclusive = [('config', 'backup'), ('config', 'force')]

    module = NetworkModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           supports_check_mode=True)

    result = dict(changed=False)

    candidate = NetworkConfig(contents=module.params['src'], indent=2)

    contents = get_config(module)
    if contents:
        config = NetworkConfig(contents=contents, indent=2)
        result['_backup'] = str(contents)

    if not module.params['force']:
        commands = candidate.difference(config)
        commands = dumps(commands, 'commands').split('\n')
        commands = [str(c) for c in commands if c]
    else:
        commands = str(candidate).split('\n')

    if commands:
        if not module.check_mode:
            response = module.config(commands)
            result['responses'] = response
        result['changed'] = True

    result['updates'] = commands
    module.exit_json(**result)
Beispiel #39
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    update = module.params['update']

    candidate = get_candidate(module)

    if match != 'none':
        config = get_config(module, result)
        configobjs = candidate.difference(config, match=match, replace=replace)
    else:
        config = None
        configobjs = candidate.items

    if module.params['backup']:
        backup_config(module, result)

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')
        result['updates'] = commands

        if module.params['before']:
            commands[:0] = module.params['before']

        if module.params['after']:
            commands.extend(module.params['after'])

        # if the update mode is set to check just return
        # and do not try to load into the system
        if update != 'check':
            load_config(module, commands, result)

        # remove the checkpoint file used to restore the config
        # in case of an error
        if not module.check_mode:
            module.cli('no checkpoint %s' % result['__checkpoint__'])

    if module.params['save'] and not module.check_mode:
        module.config.save_config()
        result['changed'] = True
Beispiel #40
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    path = module.params['parents']

    candidate = get_candidate(module)
    if match != 'none':
        contents = module.params['config']
        if not contents:
            contents = get_config(module)
            config = NetworkConfig(indent=1, contents=contents)
            configobjs = candidate.difference(config, path=path, match=match,
                                              replace=replace)

    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands').split('\n')

        if module.params['lines']:
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

        result['updates'] = commands

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            load_config(module, commands)
        result['changed'] = True

    if module.params['save']:
        if not module.check_mode:
            module.config.save_config()
        result['changed'] = True
Beispiel #41
0
def run(module, result):
    match = module.params['match']
    replace = module.params['replace']
    replace_config = replace == 'config'
    path = module.params['parents']
    comment = module.params['comment']
    admin = module.params['admin']
    check_mode = module.check_mode

    candidate = get_candidate(module)

    if match != 'none' and replace != 'config':
        contents = get_running_config(module)
        configobj = NetworkConfig(contents=contents, indent=1)
        commands = candidate.difference(configobj, path=path, match=match,
                                          replace=replace)
    else:
        commands = candidate.items

    if commands:
        commands = dumps(commands, 'commands').split('\n')

        if any((module.params['lines'], module.params['src'])):
            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

            result['commands'] = commands

        diff = load_config(module, commands, result['warnings'],
                           not check_mode, replace_config, comment, admin)
        if diff:
            result['diff'] = dict(prepared=diff)
            result['changed'] = True
Beispiel #42
0
def run(module, result):
    match = module.params['match']

    candidate = get_candidate(module)

    if match != 'none':
        config_text = get_active_config(module)
        config = NetworkConfig(indent=4, contents=config_text)
        configobjs = candidate.difference(config)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands')
        commands = commands.split('\n')

        result['commands'] = commands
        result['updates'] = commands

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            load_config(module, commands)
        result['changed'] = True
Beispiel #43
0
def run(module, result):
    match = module.params['match']

    candidate = get_candidate(module)

    if match != 'none':
        config_text = get_active_config(module)
        config = NetworkConfig(indent=4, contents=config_text)
        configobjs = candidate.difference(config)
    else:
        configobjs = candidate.items

    if configobjs:
        commands = dumps(configobjs, 'commands')
        commands = commands.split('\n')

        result['commands'] = commands
        result['updates'] = commands

        # send the configuration commands to the device and merge
        # them with the current running config
        if not module.check_mode:
            load_config(module, commands)
        result['changed'] = True
Beispiel #44
0
def main():
    """ main entry point for module execution
    """
    argument_spec = dict(
        src=dict(type='path'),

        lines=dict(aliases=['commands'], type='list'),
        parents=dict(type='list'),

        before=dict(type='list'),
        after=dict(type='list'),

        match=dict(default='line', choices=['line', 'strict', 'exact', 'none']),
        replace=dict(default='line', choices=['line', 'block']),

        running_config=dict(aliases=['config']),
        intended_config=dict(),

        defaults=dict(type='bool', default=False),
        backup=dict(type='bool', default=False),

        save_when=dict(choices=['always', 'never', 'modified'], default='never'),

        diff_against=dict(choices=['running', 'startup', 'intended']),
        diff_ignore_lines=dict(type='list'),

        # save is deprecated as of ans2.4, use save_when instead
        save=dict(default=False, type='bool', removed_in_version='2.4'),

        # force argument deprecated in ans2.2
        force=dict(default=False, type='bool', removed_in_version='2.2')
    )

    argument_spec.update(nxos_argument_spec)

    mutually_exclusive = [('lines', 'src'),
                          ('save', 'save_when')]

    required_if = [('match', 'strict', ['lines']),
                   ('match', 'exact', ['lines']),
                   ('replace', 'block', ['lines']),
                   ('diff_against', 'intended', ['intended_config'])]

    module = AnsibleModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           required_if=required_if,
                           supports_check_mode=True)

    warnings = list()
    nxos_check_args(module, warnings)

    result = {'changed': False, 'warnings': warnings}

    config = None

    if module.params['backup'] or (module._diff and module.params['diff_against'] == 'running'):
        contents = get_config(module)
        config = NetworkConfig(indent=2, contents=contents)
        if module.params['backup']:
            result['__backup__'] = contents

    if any((module.params['src'], module.params['lines'])):
        match = module.params['match']
        replace = module.params['replace']

        candidate = get_candidate(module)

        if match != 'none':
            config = get_running_config(module, config)
            path = module.params['parents']
            configobjs = candidate.difference(config, match=match, replace=replace, path=path)
        else:
            configobjs = candidate.items

        if configobjs:
            commands = dumps(configobjs, 'commands').split('\n')

            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

            result['commands'] = commands
            result['updates'] = commands

            if not module.check_mode:
                load_config(module, commands)

            result['changed'] = True

    running_config = None
    startup_config = None

    diff_ignore_lines = module.params['diff_ignore_lines']

    if module.params['save']:
        module.params['save_when'] = 'always'

    if module.params['save_when'] != 'never':
        output = run_commands(module, ['show running-config', 'show startup-config'])

        running_config = NetworkConfig(indent=1, contents=output[0], ignore_lines=diff_ignore_lines)
        startup_config = NetworkConfig(indent=1, contents=output[1], ignore_lines=diff_ignore_lines)

        if running_config.sha1 != startup_config.sha1 or module.params['save_when'] == 'always':
            result['changed'] = True
            if not module.check_mode:
                cmd = {'command': 'copy running-config startup-config', 'output': 'text'}
                run_commands(module, [cmd])
            else:
                module.warn('Skipping command `copy running-config startup-config` '
                            'due to check_mode.  Configuration not copied to '
                            'non-volatile storage')

    if module._diff:
        if not running_config:
            output = run_commands(module, 'show running-config')
            contents = output[0]
        else:
            contents = running_config.config_text

        # recreate the object in order to process diff_ignore_lines
        running_config = NetworkConfig(indent=1, contents=contents, ignore_lines=diff_ignore_lines)

        if module.params['diff_against'] == 'running':
            if module.check_mode:
                module.warn("unable to perform diff against running-config due to check mode")
                contents = None
            else:
                contents = config.config_text

        elif module.params['diff_against'] == 'startup':
            if not startup_config:
                output = run_commands(module, 'show startup-config')
                contents = output[0]
            else:
                contents = output[0]
                contents = startup_config.config_text

        elif module.params['diff_against'] == 'intended':
            contents = module.params['intended_config']

        if contents is not None:
            base_config = NetworkConfig(indent=1, contents=contents, ignore_lines=diff_ignore_lines)

            if running_config.sha1 != base_config.sha1:
                result.update({
                    'changed': True,
                    'diff': {'before': str(base_config), 'after': str(running_config)}
                })


    module.exit_json(**result)
Beispiel #45
0
def main():
    """ main entry point for module execution
    """
    argument_spec = dict(
        src=dict(type='path'),
        lines=dict(aliases=['commands'], type='list'),
        parents=dict(type='list'),
        before=dict(type='list'),
        after=dict(type='list'),
        match=dict(default='line', choices=['line', 'strict', 'exact',
                                            'none']),
        replace=dict(default='line', choices=['line', 'block']),
        multiline_delimiter=dict(default='@'),

        # this argument is deprecated (2.2) in favor of setting match: none
        # it will be removed in a future version
        force=dict(default=False, type='bool'),
        config=dict(),
        defaults=dict(type='bool', default=False),
        backup=dict(type='bool', default=False),
        save=dict(type='bool', default=False),
    )

    argument_spec.update(ios_argument_spec)

    mutually_exclusive = [('lines', 'src')]

    required_if = [('match', 'strict', ['lines']),
                   ('match', 'exact', ['lines']),
                   ('replace', 'block', ['lines'])]

    module = AnsibleModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           required_if=required_if,
                           supports_check_mode=True)

    if module.params['force'] is True:
        module.params['match'] = 'none'

    result = {'changed': False}

    warnings = list()
    check_args(module, warnings)
    result['warnings'] = warnings

    if any((module.params['lines'], module.params['src'])):
        match = module.params['match']
        replace = module.params['replace']
        path = module.params['parents']

        candidate, want_banners = get_candidate(module)

        if match != 'none':
            config, have_banners = get_running_config(module)
            path = module.params['parents']
            configobjs = candidate.difference(config,
                                              path=path,
                                              match=match,
                                              replace=replace)
        else:
            configobjs = candidate.items
            have_banners = {}

        banners = diff_banners(want_banners, have_banners)

        if configobjs or banners:
            commands = dumps(configobjs, 'commands').split('\n')

            if module.params['lines']:
                if module.params['before']:
                    commands[:0] = module.params['before']

                if module.params['after']:
                    commands.extend(module.params['after'])

            result['commands'] = commands
            result['updates'] = commands
            result['banners'] = banners

            # send the configuration commands to the device and merge
            # them with the current running config
            if not module.check_mode:
                if commands:
                    load_config(module, commands)
                if banners:
                    load_banners(module, banners)

            result['changed'] = True

    if module.params['backup']:
        result['__backup__'] = get_config(module=module)

    if module.params['save']:
        if not module.check_mode:
            run_commands(module, ['copy running-config startup-config\r'])
        result['changed'] = True

    module.exit_json(**result)
Beispiel #46
0
def main():

    argument_spec = dict(
        lines=dict(aliases=['commands'], type='list'),
        parents=dict(type='list'),

        src=dict(type='path'),

        before=dict(type='list'),
        after=dict(type='list'),

        match=dict(default='line',
                   choices=['line', 'strict', 'exact', 'none']),
        replace=dict(default='line', choices=['line', 'block']),
        update=dict(choices=['merge', 'check'], default='merge'),
        save=dict(type='bool', default=False),
        config=dict(),
        backup=dict(type='bool', default=False)
    )

    mutually_exclusive = [('lines', 'src')]

    module = NetworkModule(argument_spec=argument_spec,
                           connect_on_load=False,
                           mutually_exclusive=mutually_exclusive,
                           supports_check_mode=True)

    parents = module.params['parents'] or list()

    match = module.params['match']
    replace = module.params['replace']
    result = dict(changed=False, saved=False)
    candidate = get_candidate(module)

    if match != 'none':
        config = get_config(module)
        if parents:
            config = get_sublevel_config(config, module)
        configobjs = candidate.difference(config, match=match, replace=replace)
    else:
        configobjs = candidate.items

    if module.params['backup']:
        result['__backup__'] = module.cli('show running-config')[0]

    commands = list()
    if configobjs:
        commands = dumps(configobjs, 'commands')
        commands = commands.split('\n')

        if module.params['before']:
            commands[:0] = module.params['before']

        if module.params['after']:
            commands.extend(module.params['after'])

        if not module.check_mode and module.params['update'] == 'merge':
            response = module.config.load_config(commands)
            result['responses'] = response

            if module.params['save']:
                module.config.save_config()
                result['saved'] = True

        result['changed'] = True

    result['updates'] = commands

    module.exit_json(**result)
Beispiel #47
0
def main():
    """ main entry point for module execution
    """
    argument_spec = dict(
        src=dict(type='path'),
        lines=dict(aliases=['commands'], type='list'),
        parents=dict(type='list'),
        before=dict(type='list'),
        after=dict(type='list'),
        match=dict(default='line', choices=['line', 'strict', 'exact',
                                            'none']),
        replace=dict(default='line', choices=['line', 'block']),
        multiline_delimiter=dict(default='@'),
        running_config=dict(aliases=['config']),
        intended_config=dict(),
        defaults=dict(type='bool', default=False),
        backup=dict(type='bool', default=False),
        save_when=dict(choices=['always', 'never', 'modified'],
                       default='never'),
        diff_against=dict(choices=['startup', 'intended', 'running']),
        diff_ignore_lines=dict(type='list'),

        # save is deprecated as of ans2.4, use save_when instead
        save=dict(default=False, type='bool', removed_in_version='2.4'),

        # force argument deprecated in ans2.2
        force=dict(default=False, type='bool', removed_in_version='2.2'))

    argument_spec.update(ios_argument_spec)

    mutually_exclusive = [('lines', 'src'), ('save', 'save_when')]

    required_if = [('match', 'strict', ['lines']),
                   ('match', 'exact', ['lines']),
                   ('replace', 'block', ['lines']),
                   ('diff_against', 'intended', ['intended_config'])]

    module = AnsibleModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           required_if=required_if,
                           supports_check_mode=True)

    result = {'changed': False}

    warnings = list()
    check_args(module, warnings)
    result['warnings'] = warnings

    config = None

    if module.params['backup'] or (module._diff and
                                   module.params['diff_against'] == 'running'):
        contents = get_config(module)
        config = NetworkConfig(indent=1, contents=contents)
        if module.params['backup']:
            result['__backup__'] = contents

    if any((module.params['lines'], module.params['src'])):
        match = module.params['match']
        replace = module.params['replace']
        path = module.params['parents']

        candidate, want_banners = get_candidate(module)

        if match != 'none':
            config, have_banners = get_running_config(module, config)
            path = module.params['parents']
            configobjs = candidate.difference(config,
                                              path=path,
                                              match=match,
                                              replace=replace)
        else:
            configobjs = candidate.items
            have_banners = {}

        banners = diff_banners(want_banners, have_banners)

        if configobjs or banners:
            commands = dumps(configobjs, 'commands').split('\n')

            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

            result['commands'] = commands
            result['updates'] = commands
            result['banners'] = banners

            # send the configuration commands to the device and merge
            # them with the current running config
            if not module.check_mode:
                if commands:
                    load_config(module, commands)
                if banners:
                    load_banners(module, banners)

            result['changed'] = True

    running_config = None
    startup_config = None

    diff_ignore_lines = module.params['diff_ignore_lines']

    if module.params['save_when'] != 'never':
        output = run_commands(module,
                              ['show running-config', 'show startup-config'])

        running_config = NetworkConfig(indent=1,
                                       contents=output[0],
                                       ignore_lines=diff_ignore_lines)
        startup_config = NetworkConfig(indent=1,
                                       contents=output[1],
                                       ignore_lines=diff_ignore_lines)

        if running_config.sha1 != startup_config.sha1 or module.params[
                'save_when'] == 'always':
            result['changed'] = True
            if not module.check_mode:
                run_commands(module, 'copy running-config startup-config')
            else:
                module.warn(
                    'Skipping command `copy running-config startup-config` '
                    'due to check_mode.  Configuration not copied to '
                    'non-volatile storage')

    if module._diff:
        if not running_config:
            output = run_commands(module, 'show running-config')
            contents = output[0]
        else:
            contents = running_config.config_text

        # recreate the object in order to process diff_ignore_lines
        running_config = NetworkConfig(indent=1,
                                       contents=contents,
                                       ignore_lines=diff_ignore_lines)

        if module.params['diff_against'] == 'running':
            if module.check_mode:
                module.warn(
                    "unable to perform diff against running-config due to check mode"
                )
                contents = None
            else:
                contents = config.config_text

        elif module.params['diff_against'] == 'startup':
            if not startup_config:
                output = run_commands(module, 'show startup-config')
                contents = output[0]
            else:
                contents = startup_config.config_text

        elif module.params['diff_against'] == 'intended':
            contents = module.params['intended_config']

        if contents is not None:
            base_config = NetworkConfig(indent=1,
                                        contents=contents,
                                        ignore_lines=diff_ignore_lines)

            if running_config.sha1 != base_config.sha1:
                result.update({
                    'changed': True,
                    'diff': {
                        'before': str(base_config),
                        'after': str(running_config)
                    }
                })

    module.exit_json(**result)
Beispiel #48
0
def main():

    argument_spec = dict(lines=dict(aliases=['commands'], type='list'),
                         parents=dict(type='list'),
                         src=dict(type='path'),
                         before=dict(type='list'),
                         after=dict(type='list'),
                         match=dict(
                             default='line',
                             choices=['line', 'strict', 'exact', 'none']),
                         replace=dict(default='line',
                                      choices=['line', 'block']),
                         update_config=dict(type='bool', default=False),
                         backup_config=dict(type='bool', default=False))
    argument_spec.update(ios_argument_spec)

    mutually_exclusive = [('lines', 'src')]

    module = NetworkModule(argument_spec=argument_spec,
                           connect_on_load=False,
                           mutually_exclusive=mutually_exclusive,
                           supports_check_mode=True)

    module.check_mode = not module.params['update_config']

    parents = module.params['parents'] or list()

    match = module.params['match']
    replace = module.params['replace']

    warnings = list()
    invoke('check_args', module, warnings)

    result = dict(changed=False, saved=False)

    candidate = get_candidate(module)

    if module.params['match'] != 'none':
        config = get_config(module)
        configobjs = candidate.difference(config, match=match, replace=replace)
    else:
        configobjs = candidate.items

    if module.params['backup_config']:
        result['__backup__'] = module.cli('show running-config')[0]

    commands = list()
    if configobjs:
        commands = dumps(configobjs, 'commands')
        commands = commands.split('\n')

        if module.params['before']:
            commands[:0] = module.params['before']

        if module.params['after']:
            commands.extend(module.params['after'])

        if not module.check_mode:
            response = load_config(module, commands, nodiff=True)
            result.update(**response)

        result['changed'] = True

    result['updates'] = commands
    result['connected'] = module.connected

    module.exit_json(**result)
Beispiel #49
0
def main():
    """ main entry point for module execution
    """

    argument_spec = dict(
        src=dict(type='str'),
        force=dict(default=False, type='bool'),
        backup=dict(default=False, type='bool'),
        config=dict(type='dict'),
    )

    mutually_exclusive = [('config', 'backup'), ('config', 'force')]

    module = NetworkModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           supports_check_mode=True)

    if not module.params['transport'] and not HAS_OPS:
        module.fail_json(msg='unable to import ops.dc library')

    result = dict(changed=False)

    contents = get_config(module)
    result['_backup'] = contents

    if module.params['transport'] in ['ssh', 'rest']:
        config = contents

        try:
            src = module.from_json(module.params['src'])
        except ValueError:
            module.fail_json(msg='unable to load src due to json parsing error')

        changeset = diff(src, config)
        candidate = merge(changeset, config)

        updates = dict()
        for path, key, new_value, old_value in changeset:
            path = '%s.%s' % ('.'.join(path), key)
            updates[path] = str(new_value)
        result['updates'] = updates

        if changeset:
            if not module.check_mode:
                module.config(config)
            result['changed'] = True

    else:
        candidate = NetworkConfig(contents=module.params['src'], indent=4)

        if contents:
            config = NetworkConfig(contents=contents, indent=4)

        if not module.params['force']:
            commands = candidate.difference(config)
            commands = dumps(commands, 'commands').split('\n')
            commands = [str(c) for c in commands if c]
        else:
            commands = str(candidate).split('\n')

        if commands:
            if not module.check_mode:
                response = module.config(commands)
                result['responses'] = response
            result['changed'] = True

        result['updates'] = commands

    module.exit_json(**result)
Beispiel #50
0
def main():

    argument_spec = dict(
        lines=dict(aliases=['commands'], type='list'),
        parents=dict(type='list'),

        src=dict(type='path'),

        before=dict(type='list'),
        after=dict(type='list'),

        match=dict(default='line',
                   choices=['line', 'strict', 'exact', 'none']),
        replace=dict(default='line', choices=['line', 'block']),

        update=dict(choices=['merge', 'check'], default='merge'),
        save=dict(type='bool', default=False),
        config=dict(),
        backup=dict(type='bool', default=False)
    )

    argument_spec.update(dellos9_argument_spec)

    mutually_exclusive = [('lines', 'src')]

    module = AnsibleModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           supports_check_mode=True)

    parents = module.params['parents'] or list()

    match = module.params['match']
    replace = module.params['replace']

    warnings = list()
    check_args(module, warnings)

    result = dict(changed=False, saved=False, warnings=warnings)

    candidate = get_candidate(module)

    if match != 'none':
        config = get_config(module)
        if parents:
            contents = get_sublevel_config(config, module)
            config = NetworkConfig(contents=contents, indent=1)
        else:
            config = NetworkConfig(contents=config, indent=1)
        configobjs = candidate.difference(config, match=match, replace=replace)

    else:
        configobjs = candidate.items

    if module.params['backup']:
        result['__backup__'] = get_config(module)

    commands = list()

    if configobjs:
        commands = dumps(configobjs, 'commands')
        commands = commands.split('\n')

        if module.params['before']:
            commands[:0] = module.params['before']

        if module.params['after']:
            commands.extend(module.params['after'])

        if not module.check_mode and module.params['update'] == 'merge':
            load_config(module, commands)

            if module.params['save']:
                cmd = {'command': 'copy runing-config startup-config', 'prompt': WARNING_PROMPTS_RE, 'answer': 'yes'}
                run_commands(module, [cmd])
                result['saved'] = True

        result['changed'] = True

    result['updates'] = commands

    module.exit_json(**result)
Beispiel #51
0
def main():
    """ main entry point for module execution
    """
    argument_spec = dict(
        src=dict(type='path'),

        lines=dict(aliases=['commands'], type='list'),

        before=dict(type='list'),
        after=dict(type='list'),

        match=dict(default='line', choices=['line', 'none']),

        running_config=dict(aliases=['config']),
        intended_config=dict(),

        backup=dict(type='bool', default=False),

        save=dict(type='bool', default=False),

        diff_against=dict(choices=['running', 'intended']),
        diff_ignore_lines=dict(type='list')
    )

    argument_spec.update(aireos_argument_spec)

    mutually_exclusive = [('lines', 'src')]

    required_if = [('diff_against', 'intended', ['intended_config'])]

    module = AnsibleModule(argument_spec=argument_spec,
                           mutually_exclusive=mutually_exclusive,
                           required_if=required_if,
                           supports_check_mode=True)

    warnings = list()
    aireos_check_args(module, warnings)
    result = {'changed': False, 'warnings': warnings}

    config = None

    if module.params['backup'] or (module._diff and module.params['diff_against'] == 'running'):
        contents = get_config(module)
        config = NetworkConfig(indent=1, contents=contents)
        if module.params['backup']:
            result['__backup__'] = contents

    if any((module.params['src'], module.params['lines'])):
        match = module.params['match']

        candidate = get_candidate(module)

        if match != 'none':
            config = get_running_config(module, config)
            configobjs = candidate.difference(config, match=match)
        else:
            configobjs = candidate.items

        if configobjs:
            commands = dumps(configobjs, 'commands').split('\n')

            if module.params['before']:
                commands[:0] = module.params['before']

            if module.params['after']:
                commands.extend(module.params['after'])

            result['commands'] = commands
            result['updates'] = commands

            if not module.check_mode:
                load_config(module, commands)

            result['changed'] = True

    diff_ignore_lines = module.params['diff_ignore_lines']

    if module.params['save']:
        result['changed'] = True
        if not module.check_mode:
            command = {"command": "save config", "prompt": "Are you sure you want to save", "answer": "y"}
            run_commands(module, command)
        else:
            module.warn('Skipping command `save config` due to check_mode.  Configuration not copied to non-volatile storage')

    if module._diff:
        output = run_commands(module, 'show run-config commands')
        contents = output[0]

        # recreate the object in order to process diff_ignore_lines
        running_config = NetworkConfig(indent=1, contents=contents, ignore_lines=diff_ignore_lines)

        if module.params['diff_against'] == 'running':
            if module.check_mode:
                module.warn("unable to perform diff against running-config due to check mode")
                contents = None
            else:
                contents = config.config_text
        elif module.params['diff_against'] == 'intended':
            contents = module.params['intended_config']

        if contents is not None:
            base_config = NetworkConfig(indent=1, contents=contents, ignore_lines=diff_ignore_lines)

            if running_config.sha1 != base_config.sha1:
                result.update({
                    'changed': True,
                    'diff': {'before': str(base_config), 'after': str(running_config)}
                })

    module.exit_json(**result)