def doConfigRollBack(module, prompt, answer):
host = module.params['host']
server = module.params['serverip']
username = module.params['serverusername']
password = module.params['serverpassword']
protocol = module.params['protocol'].lower()
rcPath = module.params['rcpath']
configType = module.params['configType']
confPath = rcPath
retVal = ''
command = "copy " + protocol + " " + protocol + "://"
command = command + username + "@" + server + "/" + confPath
command = command + " " + configType + " vrf management\n"
cnos.debugOutput(command + "\n")
# cnos.checkForFirstTimeAccess(module, command, 'yes/no', 'yes')
cmd = []
if(protocol == "scp"):
scp_cmd1 = [{'command': command, 'prompt': 'timeout:', 'answer': '0'}]
scp_cmd2 = [{'command': '\n', 'prompt': 'Password:'******'answer': password}]
cmd.extend(scp_cmd1)
cmd.extend(scp_cmd2)
if(configType == 'startup-config'):
scp_cmd3 = [{'command': 'y', 'prompt': None, 'answer': None}]
cmd.extend(scp_cmd3)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
elif(protocol == "sftp"):
sftp_cmd = [{'command': command, 'prompt': 'Password:'******'answer': password}]
cmd.extend(sftp_cmd)
# cnos.debugOutput(configType + "\n")
if(configType == 'startup-config'):
sftp_cmd2 = [{'command': 'y', 'prompt': None, 'answer': None}]
cmd.extend(sftp_cmd2)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
elif(protocol == "ftp"):
ftp_cmd = [{'command': command, 'prompt': 'Password:'******'answer': password}]
cmd.extend(ftp_cmd)
if(configType == 'startup-config'):
ftp_cmd2 = [{'command': 'y', 'prompt': None, 'answer': None}]
cmd.extend(ftp_cmd2)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
elif(protocol == "tftp"):
command = "copy " + protocol + " " + protocol
command = command + "://" + server + "/" + confPath
command = command + " " + configType + " vrf management\n"
cnos.debugOutput(command)
tftp_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(tftp_cmd)
if(configType == 'startup-config'):
tftp_cmd2 = [{'command': 'y', 'prompt': None, 'answer': None}]
cmd.extend(tftp_cmd2)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
else:
return "Error-110"
return retVal
def doImageDownload(module, prompt, answer):
protocol = module.params['protocol'].lower()
server = module.params['serverip']
imgPath = module.params['imgpath']
imgType = module.params['imgtype']
username = module.params['serverusername']
password = module.params['serverpassword']
retVal = ''
command = "copy " + protocol + " " + protocol + "://" + username + "@"
command = command + server + "/" + imgPath + " system-image "
command = command + imgType + " vrf management"
cmd = []
if(protocol == "scp"):
prompt = ['timeout', 'Confirm download operation', 'Password',
'Do you want to change that to the standby image']
answer = ['240', 'y', password, 'y']
scp_cmd = [{'command': command, 'prompt': prompt, 'answer': answer,
'check_all': True}]
cmd.extend(scp_cmd)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
elif(protocol == "sftp"):
prompt = ['Confirm download operation', 'Password',
'Do you want to change that to the standby image']
answer = ['y', password, 'y']
sftp_cmd = [{'command': command, 'prompt': prompt, 'answer': answer,
'check_all': True}]
cmd.extend(sftp_cmd)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
elif(protocol == "ftp"):
prompt = ['Confirm download operation', 'Password',
'Do you want to change that to the standby image']
answer = ['y', password, 'y']
ftp_cmd = [{'command': command, 'prompt': prompt, 'answer': answer,
'check_all': True}]
cmd.extend(ftp_cmd)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
elif(protocol == "tftp"):
command = "copy " + protocol + " " + protocol + "://" + server
command = command + "/" + imgPath + " system-image " + imgType
command = command + + " vrf management"
prompt = ['Confirm download operation',
'Do you want to change that to the standby image']
answer = ['y', 'y']
tftp_cmd = [{'command': command, 'prompt': prompt, 'answer': answer,
'check_all': True}]
cmd.extend(tftp_cmd)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
else:
return "Error-110"
return retVal
def checkVlanNameNotAssigned(module, prompt, answer):
retVal = "ok"
vlanId = module.params['vlanArg1']
vlanName = module.params['vlanArg3']
command = "show vlan id " + vlanId
cmd = [{'command': command, 'prompt': None, 'answer': None}]
retVal = str(cnos.run_cnos_commands(module, cmd))
if (retVal.find('Error') != -1):
command = "display vlan id " + vlanId
retVal = str(cnos.run_cnos_commands(module, cmd))
if (retVal.find(vlanName) != -1):
return "Nok"
else:
return "ok"
def main():
module = AnsibleModule(argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=False),
username=dict(required=False),
password=dict(required=False, no_log=True),
enablePassword=dict(required=False, no_log=True),
),
supports_check_mode=False)
command = 'show running-config'
outputfile = module.params['outputfile']
output = ''
cmd = [{'command': command, 'prompt': None, 'answer': None}]
output = output + str(cnos.run_cnos_commands(module, cmd))
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(changed=True,
msg="Running Configuration saved in file ")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=False),
username=dict(required=False),
password=dict(required=False, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
),
supports_check_mode=False)
command = 'write erase'
outputfile = module.params['outputfile']
output = ''
cmd = [{'command': command, 'prompt': '[n]', 'answer': 'y'}]
output = output + str(cnos.run_cnos_commands(module, cmd))
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(
changed=True,
msg="Switch Startup Config is Reset to Factory settings")
else:
module.fail_json(msg=errorMsg)
def portChannelConfig(module, prompt, answer):
retVal = ''
command = ''
portChArg1 = module.params['interfaceArg1']
portChArg2 = module.params['interfaceArg2']
portChArg3 = module.params['interfaceArg3']
if(portChArg1 == "port-channel" and prompt == "(config)#"):
command = command + portChArg1 + " load-balance ethernet "
if(portChArg2 == "destination-ip" or
portChArg2 == "destination-mac" or
portChArg2 == "destination-port" or
portChArg2 == "source-dest-ip" or
portChArg2 == "source-dest-mac" or
portChArg2 == "source-dest-port" or
portChArg2 == "source-interface" or
portChArg2 == "source-ip" or
portChArg2 == "source-mac" or
portChArg2 == "source-port"):
# debugOutput(portChArg2)
command = command + portChArg2 + " "
if(portChArg3 is None):
command = command + ""
elif(portChArg3 == "source-interface"):
command = command + portChArg3
cmd = [{'command': command, 'prompt': None, 'answer': None}]
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
else:
retVal = "Error-231"
return retVal
else:
retVal = "Error-232"
return retVal
def main():
module = AnsibleModule(
argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=False),
username=dict(required=False),
password=dict(required=False, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),),
supports_check_mode=False)
command = 'reload'
outputfile = module.params['outputfile']
output = ''
cmd = [{'command': command, 'prompt': 'reboot system? (y/n): ',
'answer': 'y'}]
output = output + str(cnos.run_cnos_commands(module, cmd))
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
errorMsg = cnos.checkOutputForError(output)
if(errorMsg in "Device Response Timed out"):
module.exit_json(changed=True,
msg="Device is Reloading. Please wait...")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(argument_spec=dict(
clicommand=dict(required=True),
outputfile=dict(required=True),
condition=dict(required=True),
flag=dict(required=True),
host=dict(required=False),
deviceType=dict(required=True),
username=dict(required=False),
password=dict(required=False, no_log=True),
enablePassword=dict(required=False, no_log=True),
),
supports_check_mode=False)
condition = module.params['condition']
flag = module.params['flag']
cliCommand = module.params['clicommand']
outputfile = module.params['outputfile']
output = ''
if (condition is None or condition != flag):
module.exit_json(changed=True, msg="Command Skipped for this switch")
return ''
# Send the CLi command
cmd = [{'command': cliCommand, 'prompt': None, 'answer': None}]
output = output + str(cnos.run_cnos_commands(module, cmd))
# Write to memory
save_cmd = [{'command': 'save', 'prompt': None, 'answer': None}]
cmd.extend(save_cmd)
output = output + str(cnos.run_cnos_commands(module, cmd))
# Save it into the file
path = outputfile.rsplit('/', 1)
# cnos.debugOutput(path[0])
if not os.path.exists(path[0]):
os.makedirs(path[0])
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(changed=True,
msg="CLI Command executed and results saved in file ")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(argument_spec=dict(
commandfile=dict(required=True),
outputfile=dict(required=True),
condition=dict(required=True),
flag=dict(required=True),
host=dict(required=False),
deviceType=dict(required=True),
username=dict(required=False),
password=dict(required=False, no_log=True),
enablePassword=dict(required=False, no_log=True),
),
supports_check_mode=False)
condition = module.params['condition']
flag = module.params['flag']
commandfile = module.params['commandfile']
outputfile = module.params['outputfile']
output = ''
if (condition is None or condition != flag):
module.exit_json(changed=True, msg="Template Skipped for this switch")
return " "
# Send commands one by one
f = open(commandfile, "r")
cmd = []
for line in f:
# Omit the comment lines in template file
if not line.startswith("#"):
# cnos.debugOutput(line)
command = line.strip()
inner_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(inner_cmd)
# Write to memory
save_cmd = [{'command': 'save', 'prompt': None, 'answer': None}]
cmd.extend(save_cmd)
output = output + str(cnos.run_cnos_commands(module, cmd))
# Write output to file
path = outputfile.rsplit('/', 1)
# cnos.debugOutput(path[0])
if not os.path.exists(path[0]):
os.makedirs(path[0])
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(changed=True, msg="Template Applied")
else:
module.fail_json(msg=errorMsg)
def vlanAccessMapConfig(module, cmd):
retVal = ''
# Wait time to get response from server
command = ''
vlanArg3 = module.params['vlanArg3']
vlanArg4 = module.params['vlanArg4']
vlanArg5 = module.params['vlanArg5']
deviceType = module.params['deviceType']
if (vlanArg3 == "action"):
command = command + vlanArg3 + ' '
value = cnos.checkSanityofVariable(deviceType, "vlan_accessmap_action",
vlanArg4)
if (value == "ok"):
command = command + vlanArg4
else:
retVal = "Error-135"
return retVal
elif (vlanArg3 == "match"):
command = command + vlanArg3 + ' '
if (vlanArg4 == "ip" or vlanArg4 == "mac"):
command = command + vlanArg4 + ' address '
value = cnos.checkSanityofVariable(deviceType,
"vlan_access_map_name",
vlanArg5)
if (value == "ok"):
command = command + vlanArg5
else:
retVal = "Error-136"
return retVal
else:
retVal = "Error-137"
return retVal
elif (vlanArg3 == "statistics"):
command = vlanArg3 + " per-entry"
else:
retVal = "Error-138"
return retVal
inner_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(inner_cmd)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
# debugOutput(command)
return retVal
def vlagConfig(module, prompt, answer):
retVal = ''
# vlag config command happens here.
command = 'vlag '
vlagArg1 = module.params['vlagArg1']
vlagArg2 = module.params['vlagArg2']
vlagArg3 = module.params['vlagArg3']
vlagArg4 = module.params['vlagArg4']
deviceType = module.params['deviceType']
if (vlagArg1 == "enable"):
# debugOutput("enable")
command = command + vlagArg1 + " "
elif (vlagArg1 == "auto-recovery"):
# debugOutput("auto-recovery")
command = command + vlagArg1 + " "
value = cnos.checkSanityofVariable(deviceType, "vlag_auto_recovery",
vlagArg2)
if (value == "ok"):
command = command + vlagArg2
else:
retVal = "Error-160"
return retVal
elif (vlagArg1 == "config-consistency"):
# debugOutput("config-consistency")
command = command + vlagArg1 + " "
value = cnos.checkSanityofVariable(deviceType,
"vlag_config_consistency", vlagArg2)
if (value == "ok"):
command = command + vlagArg2
else:
retVal = "Error-161"
return retVal
elif (vlagArg1 == "isl"):
# debugOutput("isl")
command = command + vlagArg1 + " port-channel "
value = cnos.checkSanityofVariable(deviceType, "vlag_port_aggregation",
vlagArg2)
if (value == "ok"):
command = command + vlagArg2
else:
retVal = "Error-162"
return retVal
elif (vlagArg1 == "mac-address-table"):
# debugOutput("mac-address-table")
command = command + vlagArg1 + " refresh"
elif (vlagArg1 == "peer-gateway"):
# debugOutput("peer-gateway")
command = command + vlagArg1 + " "
elif (vlagArg1 == "priority"):
# debugOutput("priority")
command = command + vlagArg1 + " "
value = cnos.checkSanityofVariable(deviceType, "vlag_priority",
vlagArg2)
if (value == "ok"):
command = command + vlagArg2
else:
retVal = "Error-163"
return retVal
elif (vlagArg1 == "startup-delay"):
# debugOutput("startup-delay")
command = command + vlagArg1 + " "
value = cnos.checkSanityofVariable(deviceType, "vlag_startup_delay",
vlagArg2)
if (value == "ok"):
command = command + vlagArg2
else:
retVal = "Error-164"
return retVal
elif (vlagArg1 == "tier-id"):
# debugOutput("tier-id")
command = command + vlagArg1 + " "
value = cnos.checkSanityofVariable(deviceType, "vlag_tier_id",
vlagArg2)
if (value == "ok"):
command = command + vlagArg2
else:
retVal = "Error-165"
return retVal
elif (vlagArg1 == "vrrp"):
# debugOutput("vrrp")
command = command + vlagArg1 + " active"
elif (vlagArg1 == "instance"):
# debugOutput("instance")
command = command + vlagArg1 + " "
value = cnos.checkSanityofVariable(deviceType, "vlag_instance",
vlagArg2)
if (value == "ok"):
command = command + vlagArg2
if (vlagArg3 is not None):
command = command + " port-channel "
value = cnos.checkSanityofVariable(deviceType,
"vlag_port_aggregation",
vlagArg3)
if (value == "ok"):
command = command + vlagArg3
else:
retVal = "Error-162"
return retVal
else:
command = command + " enable "
else:
retVal = "Error-166"
return retVal
elif (vlagArg1 == "hlthchk"):
# debugOutput("hlthchk")
command = command + vlagArg1 + " "
value = cnos.checkSanityofVariable(deviceType, "vlag_hlthchk_options",
vlagArg2)
if (value == "ok"):
if (vlagArg2 == "keepalive-attempts"):
value = cnos.checkSanityofVariable(deviceType,
"vlag_keepalive_attempts",
vlagArg3)
if (value == "ok"):
command = command + vlagArg2 + " " + vlagArg3
else:
retVal = "Error-167"
return retVal
elif (vlagArg2 == "keepalive-interval"):
value = cnos.checkSanityofVariable(deviceType,
"vlag_keepalive_interval",
vlagArg3)
if (value == "ok"):
command = command + vlagArg2 + " " + vlagArg3
else:
retVal = "Error-168"
return retVal
elif (vlagArg2 == "retry-interval"):
value = cnos.checkSanityofVariable(deviceType,
"vlag_retry_interval",
vlagArg3)
if (value == "ok"):
command = command + vlagArg2 + " " + vlagArg3
else:
retVal = "Error-169"
return retVal
elif (vlagArg2 == "peer-ip"):
# Here I am not taking care of IPV6 option.
value = cnos.checkSanityofVariable(deviceType, "vlag_peerip",
vlagArg3)
if (value == "ok"):
command = command + vlagArg2 + " " + vlagArg3
if (vlagArg4 is not None):
value = cnos.checkSanityofVariable(
deviceType, "vlag_peerip_vrf", vlagArg4)
if (value == "ok"):
command = command + " vrf " + vlagArg4
else:
retVal = "Error-170"
return retVal
else:
retVal = "Error-171"
return retVal
else:
retVal = "Error-172"
return retVal
# debugOutput(command)
cmd = [{'command': command, 'prompt': None, 'answer': None}]
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
return retVal
def bgpConfig(module, cmd, prompt, answer):
retVal = ''
command = ''
bgpArg1 = module.params['bgpArg1']
bgpArg2 = module.params['bgpArg2']
bgpArg3 = module.params['bgpArg3']
bgpArg4 = module.params['bgpArg4']
bgpArg5 = module.params['bgpArg5']
bgpArg6 = module.params['bgpArg6']
bgpArg7 = module.params['bgpArg7']
bgpArg8 = module.params['bgpArg8']
asNum = module.params['asNum']
deviceType = module.params['deviceType']
# cnos.debugOutput(bgpArg1)
if(bgpArg1 == "address-family"):
# debugOutput(bgpArg1)
command = command + bgpArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_address_family", bgpArg2)
if(value == "ok"):
command = command + bgpArg2 + " " + "unicast \n"
# debugOutput(command)
inner_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(inner_cmd)
retVal = retVal + bgpAFConfig(module, cmd, prompt, answer)
return retVal
else:
retVal = "Error-178"
return retVal
elif(bgpArg1 == "bestpath"):
# debugOutput(bgpArg1)
command = command + bgpArg1 + " "
if(bgpArg2 == "always-compare-med"):
# debugOutput(bgpArg2)
command = command + bgpArg2
elif(bgpArg2 == "compare-confed-aspath"):
# debugOutput(bgpArg2)
command = command + bgpArg2
elif(bgpArg2 == "compare-routerid"):
# debugOutput(bgpArg2)
command = command + bgpArg2
elif(bgpArg2 == "dont-compare-originator-id"):
# debugOutput(bgpArg2)
command = command + bgpArg2
elif(bgpArg2 == "tie-break-on-age"):
# debugOutput(bgpArg2)
command = command + bgpArg2
elif(bgpArg2 == "as-path"):
# debugOutput(bgpArg2)
command = command + bgpArg2 + " "
if(bgpArg3 == "ignore" or bgpArg3 == "multipath-relax"):
command = command + bgpArg3
else:
retVal = "Error-179"
return retVal
elif(bgpArg2 == "med"):
# debugOutput(bgpArg2)
command = command + bgpArg2 + " "
if(bgpArg3 == "confed" or
bgpArg3 == "missing-as-worst" or
bgpArg3 == "non-deterministic" or
bgpArg3 == "remove-recv-med" or
bgpArg3 == "remove-send-med"):
command = command + bgpArg3
else:
retVal = "Error-180"
return retVal
else:
retVal = "Error-181"
return retVal
elif(bgpArg1 == "bgp"):
# debugOutput(bgpArg1)
command = command + bgpArg1 + " as-local-count "
value = cnos.checkSanityofVariable(
deviceType, "bgp_bgp_local_count", bgpArg2)
if(value == "ok"):
command = command + bgpArg2
else:
retVal = "Error-182"
return retVal
elif(bgpArg1 == "cluster-id"):
# debugOutput(bgpArg1)
command = command + bgpArg1 + " "
value = cnos.checkSanityofVariable(deviceType, "cluster_id_as_ip", bgpArg2)
if(value == "ok"):
command = command + bgpArg2
else:
value = cnos.checkSanityofVariable(
deviceType, "cluster_id_as_number", bgpArg2)
if(value == "ok"):
command = command + bgpArg2
else:
retVal = "Error-183"
return retVal
elif(bgpArg1 == "confederation"):
# debugOutput(bgpArg1)
command = command + bgpArg1 + " "
if(bgpArg2 == "identifier"):
value = cnos.checkSanityofVariable(
deviceType, "confederation_identifier", bgpArg3)
if(value == "ok"):
command = command + bgpArg2 + " " + bgpArg3 + "\n"
else:
retVal = "Error-184"
return retVal
elif(bgpArg2 == "peers"):
value = cnos.checkSanityofVariable(
deviceType, "confederation_peers_as", bgpArg3)
if(value == "ok"):
command = command + bgpArg2 + " " + bgpArg3
else:
retVal = "Error-185"
return retVal
else:
retVal = "Error-186"
return retVal
elif(bgpArg1 == "enforce-first-as"):
# debugOutput(bgpArg1)
command = command + bgpArg1
elif(bgpArg1 == "fast-external-failover"):
# debugOutput(bgpArg1)
command = command + bgpArg1
elif(bgpArg1 == "graceful-restart"):
# debugOutput(bgpArg1)
command = command + bgpArg1 + " stalepath-time "
value = cnos.checkSanityofVariable(
deviceType, "stalepath_delay_value", bgpArg2)
if(value == "ok"):
command = command + bgpArg2
else:
retVal = "Error-187"
return retVal
elif(bgpArg1 == "graceful-restart-helper"):
# debugOutput(bgpArg1)
command = command + bgpArg1
elif(bgpArg1 == "log-neighbor-changes"):
# debugOutput(bgpArg1)
command = command + bgpArg1
elif(bgpArg1 == "maxas-limit"):
# debugOutput(bgpArg1)
command = command + bgpArg1 + " "
value = cnos.checkSanityofVariable(deviceType, "maxas_limit_as", bgpArg2)
if(value == "ok"):
command = command + bgpArg2
else:
retVal = "Error-188"
return retVal
elif(bgpArg1 == "neighbor"):
# debugOutput(bgpArg1)
command = command + bgpArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "neighbor_ipaddress", bgpArg2)
if(value == "ok"):
command = command + bgpArg2
if(bgpArg3 is not None):
command = command + " remote-as "
value = cnos.checkSanityofVariable(
deviceType, "neighbor_as", bgpArg3)
if(value == "ok"):
# debugOutput(command)
command = command + bgpArg3
inner_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(inner_cmd)
retVal = retVal + bgpNeighborConfig(module, cmd, prompt, answer)
return retVal
else:
retVal = "Error-189"
return retVal
elif(bgpArg1 == "router-id"):
# debugOutput(bgpArg1)
command = command + bgpArg1 + " "
value = cnos.checkSanityofVariable(deviceType, "router_id", bgpArg2)
if(value == "ok"):
command = command + bgpArg2
else:
retVal = "Error-190"
return retVal
elif(bgpArg1 == "shutdown"):
# debugOutput(bgpArg1)
command = command + bgpArg1
elif(bgpArg1 == "synchronization"):
# debugOutput(bgpArg1)
command = command + bgpArg1
elif(bgpArg1 == "timers"):
# cnos.debugOutput(bgpArg3)
command = command + bgpArg1 + " bgp "
value = cnos.checkSanityofVariable(
deviceType, "bgp_keepalive_interval", bgpArg2)
if(value == "ok"):
command = command + bgpArg2
else:
retVal = "Error-191"
return retVal
if(bgpArg3 is not None):
value = cnos.checkSanityofVariable(deviceType, "bgp_holdtime", bgpArg3)
if(value == "ok"):
command = command + " " + bgpArg3
else:
retVal = "Error-192"
return retVal
else:
retVal = "Error-192"
return retVal
elif(bgpArg1 == "vrf"):
# debugOutput(bgpArg1)
command = command + bgpArg1 + " default"
else:
# debugOutput(bgpArg1)
retVal = "Error-192"
return retVal
# debugOutput(command)
inner_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(inner_cmd)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
command = "exit \n"
# debugOutput(command)
return retVal
def bgpAFConfig(module, cmd, prompt, answer):
retVal = ''
command = ''
bgpAFArg1 = module.params['bgpArg3']
bgpAFArg2 = module.params['bgpArg4']
bgpAFArg3 = module.params['bgpArg5']
bgpAFArg4 = module.params['bgpArg6']
bgpAFArg5 = module.params['bgpArg7']
bgpAFArg6 = module.params['bgpArg8']
deviceType = module.params['deviceType']
if(bgpAFArg1 == "aggregate-address"):
command = command + bgpAFArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_aggregate_prefix", bgpAFArg2)
if(value == "ok"):
if(bgpAFArg2 is None):
command = command.strip()
elif(bgpAFArg2 == "as-set" or bgpAFArg2 == "summary-only"):
command = command + bgpAFArg2 + " "
if((bgpAFArg3 is not None) and (bgpAFArg2 == "as-set")):
command = command + "summary-only"
else:
retVal = "Error-297"
return retVal
else:
retVal = "Error-296"
return retVal
elif(bgpAFArg1 == "client-to-client"):
command = command + bgpAFArg1 + " reflection "
elif(bgpAFArg1 == "dampening"):
command = command + bgpAFArg1 + " "
if(bgpAFArg2 == "route-map"):
command = command + bgpAFArg2 + " "
value = cnos.checkSanityofVariable(
deviceType, "addrfamily_routemap_name", bgpAFArg3)
if(value == "ok"):
command = command + bgpAFArg3
else:
retVal = "Error-196"
return retVal
elif(bgpAFArg2 is not None):
value = cnos.checkSanityofVariable(
deviceType, "reachability_half_life", bgpAFArg2)
if(value == "ok"):
command = command + bgpAFArg2 + " "
if(bgpAFArg3 is not None):
value1 = cnos.checkSanityofVariable(
deviceType, "start_reuse_route_value", bgpAFArg3)
value2 = cnos.checkSanityofVariable(
deviceType, "start_suppress_route_value", bgpAFArg4)
value3 = cnos.checkSanityofVariable(
deviceType, "max_duration_to_suppress_route",
bgpAFArg5)
if(value1 == "ok" and value2 == "ok" and value3 == "ok"):
command = command + bgpAFArg3 + " " + bgpAFArg4 + \
" " + bgpAFArg5 + " "
if(bgpAFArg6 is not None):
value = cnos.checkSanityofVariable(
deviceType,
"unreachability_halftime_for_penalty",
bgpAFArg6)
if(value == "ok"):
command = command + bgpAFArg6
else:
retVal = "Error-295"
return retVal
else:
command = command.strip()
else:
retVal = "Error-294"
return retVal
elif(bgpAFArg1 == "distance"):
command = command + bgpAFArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "distance_external_AS", bgpAFArg2)
if(value == "ok"):
command = command + bgpAFArg2 + " "
value = cnos.checkSanityofVariable(
deviceType, "distance_internal_AS", bgpAFArg3)
if(value == "ok"):
command = command + bgpAFArg3 + " "
value = cnos.checkSanityofVariable(
deviceType, "distance_local_routes", bgpAFArg4)
if(value == "ok"):
command = command + bgpAFArg4
else:
retVal = "Error-291"
return retVal
else:
retVal = "Error-292"
return retVal
else:
retVal = "Error-293"
return retVal
elif(bgpAFArg1 == "maximum-paths"):
command = command + bgpAFArg1 + " "
value = cnos.checkSanityofVariable(deviceType, "maxpath_option", bgpAFArg2)
if(value == "ok"):
command = command + bgpAFArg2 + " "
value = cnos.checkSanityofVariable(
deviceType, "maxpath_numbers", bgpAFArg3)
if(value == "ok"):
command = command + bgpAFArg3
else:
retVal = "Error-199"
return retVal
else:
retVal = "Error-290"
return retVal
elif(bgpAFArg1 == "network"):
command = command + bgpAFArg1 + " "
if(bgpAFArg2 == "synchronization"):
command = command + bgpAFArg2
else:
value = cnos.checkSanityofVariable(
deviceType, "network_ip_prefix_with_mask", bgpAFArg2)
if(value == "ok"):
command = command + bgpAFArg2 + " "
if(bgpAFArg3 is not None and bgpAFArg3 == "backdoor"):
command = command + bgpAFArg3
elif(bgpAFArg3 is not None and bgpAFArg3 == "route-map"):
command = command + bgpAFArg3
value = cnos.checkSanityofVariable(
deviceType, "addrfamily_routemap_name", bgpAFArg4)
if(value == "ok"):
command = command + bgpAFArg4 + " "
if(bgpAFArg5 is not None and bgpAFArg5 == "backdoor"):
command = command + bgpAFArg5
else:
retVal = "Error-298"
return retVal
else:
retVal = "Error-196"
return retVal
else:
command = command.strip()
else:
value = cnos.checkSanityofVariable(
deviceType, "network_ip_prefix_value", bgpAFArg2)
if(value == "ok"):
command = command + bgpAFArg2 + " "
if(bgpAFArg3 is not None and bgpAFArg3 == "backdoor"):
command = command + bgpAFArg3
elif(bgpAFArg3 is not None and bgpAFArg3 == "route-map"):
command = command + bgpAFArg3
value = cnos.checkSanityofVariable(
deviceType, "addrfamily_routemap_name", bgpAFArg4)
if(value == "ok"):
command = command + bgpAFArg4 + " "
if(bgpAFArg5 is not None and
bgpAFArg5 == "backdoor"):
command = command + bgpAFArg5
else:
retVal = "Error-298"
return retVal
else:
retVal = "Error-196"
return retVal
elif(bgpAFArg3 is not None and bgpAFArg3 == "mask"):
command = command + bgpAFArg3
value = cnos.checkSanityofVariable(
deviceType, "network_ip_prefix_mask", bgpAFArg4)
if(value == "ok"):
command = command + bgpAFArg4 + " "
else:
retVal = "Error-299"
return retVal
else:
command = command.strip()
else:
retVal = "Error-300"
return retVal
elif(bgpAFArg1 == "nexthop"):
command = command + bgpAFArg1 + " trigger-delay critical "
value = cnos.checkSanityofVariable(
deviceType, "nexthop_crtitical_delay", bgpAFArg2)
if(value == "ok"):
command = command + bgpAFArg2 + " "
value = cnos.checkSanityofVariable(
deviceType, "nexthop_noncrtitical_delay", bgpAFArg3)
if(value == "ok"):
command = command + bgpAFArg3 + " "
else:
retVal = "Error-198"
return retVal
else:
retVal = "Error-197"
return retVal
elif(bgpAFArg1 == "redistribute"):
command = command + bgpAFArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "addrfamily_redistribute_option", bgpAFArg2)
if(value == "ok"):
if(bgpAFArg2 is not None):
command = command + bgpAFArg2 + " " + "route-map "
value = cnos.checkSanityofVariable(
deviceType, "addrfamily_routemap_name", bgpAFArg3)
if(value == "ok"):
command = command + bgpAFArg3
else:
retVal = "Error-196"
return retVal
else:
retVal = "Error-195"
return retVal
elif(bgpAFArg1 == "save" or bgpAFArg1 == "synchronization"):
command = command + bgpAFArg1
else:
retVal = "Error-194"
return retVal
# debugOutput(command)
inner_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(inner_cmd)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
command = "exit \n"
return retVal
def bgpNeighborAFConfig(module, cmd, prompt, answer):
retVal = ''
command = ''
bgpNeighborAFArg1 = module.params['bgpArg6']
bgpNeighborAFArg2 = module.params['bgpArg7']
bgpNeighborAFArg3 = module.params['bgpArg8']
deviceType = module.params['deviceType']
if(bgpNeighborAFArg1 == "allowas-in"):
command = command + bgpNeighborAFArg1 + " "
if(bgpNeighborAFArg2 is not None):
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_af_occurances", bgpNeighborAFArg2)
if(value == "ok"):
command = command + bgpNeighborAFArg2
else:
retVal = "Error-325"
return retVal
else:
command = command
elif(bgpNeighborAFArg1 == "default-originate"):
command = command + bgpNeighborAFArg1 + " "
if(bgpNeighborAFArg2 is not None and bgpNeighborAFArg2 == "route-map"):
command = command + bgpNeighborAFArg2 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_af_routemap", bgpNeighborAFArg2)
if(value == "ok"):
command = command + bgpNeighborAFArg3
else:
retVal = "Error-324"
return retVal
elif(bgpNeighborAFArg1 == "filter-list"):
command = command + bgpNeighborAFArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_af_filtername", bgpNeighborAFArg2)
if(value == "ok"):
command = command + bgpNeighborAFArg2 + " "
if(bgpNeighborAFArg3 == "in" or bgpNeighborAFArg3 == "out"):
command = command + bgpNeighborAFArg3
else:
retVal = "Error-323"
return retVal
else:
retVal = "Error-322"
return retVal
elif(bgpNeighborAFArg1 == "maximum-prefix"):
command = command + bgpNeighborAFArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_af_maxprefix", bgpNeighborAFArg2)
if(value == "ok"):
command = command + bgpNeighborAFArg2 + " "
if(bgpNeighborAFArg3 is not None):
command = command + bgpNeighborAFArg3
else:
command = command.strip()
else:
retVal = "Error-326"
return retVal
elif(bgpNeighborAFArg1 == "next-hop-self"):
command = command + bgpNeighborAFArg1
elif(bgpNeighborAFArg1 == "prefix-list"):
command = command + bgpNeighborAFArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_af_prefixname", bgpNeighborAFArg2)
if(value == "ok"):
command = command + bgpNeighborAFArg2 + " "
if(bgpNeighborAFArg3 == "in" or bgpNeighborAFArg3 == "out"):
command = command + bgpNeighborAFArg3
else:
retVal = "Error-321"
return retVal
else:
retVal = "Error-320"
return retVal
elif(bgpNeighborAFArg1 == "route-map"):
command = command + bgpNeighborAFArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_af_routemap", bgpNeighborAFArg2)
if(value == "ok"):
command = command + bgpNeighborAFArg2
else:
retVal = "Error-319"
return retVal
elif(bgpNeighborAFArg1 == "route-reflector-client"):
command = command + bgpNeighborAFArg1
elif(bgpNeighborAFArg1 == "send-community"):
command = command + bgpNeighborAFArg1 + " "
if(bgpNeighborAFArg2 is not None and bgpNeighborAFArg2 == "extended"):
command = command + bgpNeighborAFArg2
else:
command = command
elif(bgpNeighborAFArg1 == "soft-reconfiguration"):
command = command + bgpNeighborAFArg1 + " inbound"
elif(bgpNeighborAFArg1 == "unsuppress-map"):
command = command + bgpNeighborAFArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_af_routemap", bgpNeighborAFArg2)
if(value == "ok"):
command = command + bgpNeighborAFArg2
else:
retVal = "Error-318"
return retVal
else:
retVal = "Error-317"
return retVal
# debugOutput(command)
inner_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(inner_cmd)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
return retVal
def bgpNeighborConfig(module, cmd, prompt, answer):
retVal = ''
command = ''
bgpNeighborArg1 = module.params['bgpArg4']
bgpNeighborArg2 = module.params['bgpArg5']
bgpNeighborArg3 = module.params['bgpArg6']
bgpNeighborArg4 = module.params['bgpArg7']
bgpNeighborArg5 = module.params['bgpArg8']
deviceType = module.params['deviceType']
if(bgpNeighborArg1 == "address-family"):
command = command + bgpNeighborArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_address_family", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2 + " unicast"
# debugOutput(command)
inner_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(inner_cmd)
retVal = retVal + bgpNeighborAFConfig(module, cmd, '(config-router-neighbor-af)#', answer)
return retVal
else:
retVal = "Error-316"
return retVal
elif(bgpNeighborArg1 == "advertisement-interval"):
command = command + bgpNeighborArg1
elif(bgpNeighborArg1 == "bfd"):
command = command + bgpNeighborArg1 + " "
if(bgpNeighborArg2 is not None and bgpNeighborArg2 == "mutihop"):
command = command + bgpNeighborArg2
else:
command = command
elif(bgpNeighborArg1 == "connection-retry-time"):
command = command + bgpNeighborArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_connection_retrytime", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2
else:
retVal = "Error-315"
return retVal
elif(bgpNeighborArg1 == "description"):
command = command + bgpNeighborArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_description", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2
else:
retVal = "Error-314"
return retVal
elif(bgpNeighborArg1 == "disallow-infinite-holdtime"):
command = command + bgpNeighborArg1
elif(bgpNeighborArg1 == "dont-capability-negotiate"):
command = command + bgpNeighborArg1
elif(bgpNeighborArg1 == "dynamic-capability"):
command = command + bgpNeighborArg1
elif(bgpNeighborArg1 == "ebgp-multihop"):
command = command + bgpNeighborArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_maxhopcount", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2
else:
retVal = "Error-313"
return retVal
elif(bgpNeighborArg1 == "interface"):
command = command + bgpNeighborArg1 + " "
# TBD
elif(bgpNeighborArg1 == "local-as"):
command = command + bgpNeighborArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_local_as", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2 + " "
if(bgpNeighborArg3 is not None and
bgpNeighborArg3 == "no-prepend"):
command = command + bgpNeighborArg3 + " "
if(bgpNeighborArg4 is not None and
bgpNeighborArg4 == "replace-as"):
command = command + bgpNeighborArg4 + " "
if(bgpNeighborArg5 is not None and
bgpNeighborArg5 == "dual-as"):
command = command + bgpNeighborArg5
else:
command = command.strip()
else:
command = command.strip()
else:
command = command.strip()
else:
retVal = "Error-312"
return retVal
elif(bgpNeighborArg1 == "maximum-peers"):
command = command + bgpNeighborArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_maxpeers", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2
else:
retVal = "Error-311"
return retVal
elif(bgpNeighborArg1 == "password"):
command = command + bgpNeighborArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_password", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2
else:
retVal = "Error-310"
return retVal
elif(bgpNeighborArg1 == "remove-private-AS"):
command = command + bgpNeighborArg1
elif(bgpNeighborArg1 == "timers"):
command = command + bgpNeighborArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_timers_Keepalive", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_timers_holdtime", bgpNeighborArg3)
if(value == "ok"):
command = command + bgpNeighborArg3
else:
retVal = "Error-309"
return retVal
else:
retVal = "Error-308"
return retVal
elif(bgpNeighborArg1 == "transport"):
command = command + bgpNeighborArg1 + " connection-mode passive "
elif(bgpNeighborArg1 == "ttl-security"):
command = command + bgpNeighborArg1 + " hops "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_ttl_hops", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2
else:
retVal = "Error-307"
return retVal
elif(bgpNeighborArg1 == "update-source"):
command = command + bgpNeighborArg1 + " "
if(bgpNeighborArg2 is not None):
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_update_options", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2 + " "
if(bgpNeighborArg2 == "ethernet"):
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_update_ethernet",
bgpNeighborArg3)
if(value == "ok"):
command = command + bgpNeighborArg3
else:
retVal = "Error-304"
return retVal
elif(bgpNeighborArg2 == "loopback"):
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_update_loopback",
bgpNeighborArg3)
if(value == "ok"):
command = command + bgpNeighborArg3
else:
retVal = "Error-305"
return retVal
else:
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_update_vlan",
bgpNeighborArg3)
if(value == "ok"):
command = command + bgpNeighborArg3
else:
retVal = "Error-306"
return retVal
else:
command = command + bgpNeighborArg2
else:
retVal = "Error-303"
return retVal
elif(bgpNeighborArg1 == "weight"):
command = command + bgpNeighborArg1 + " "
value = cnos.checkSanityofVariable(
deviceType, "bgp_neighbor_weight", bgpNeighborArg2)
if(value == "ok"):
command = command + bgpNeighborArg2
else:
retVal = "Error-302"
return retVal
else:
retVal = "Error-301"
return retVal
# debugOutput(command)
inner_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(inner_cmd)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
command = "exit \n"
return retVal
def vlanConfig(module, prompt, answer):
retVal = ''
# Wait time to get response from server
vlanArg1 = module.params['vlanArg1']
vlanArg2 = module.params['vlanArg2']
vlanArg3 = module.params['vlanArg3']
vlanArg4 = module.params['vlanArg4']
vlanArg5 = module.params['vlanArg5']
deviceType = module.params['deviceType']
# vlan config command happens here.
command = 'vlan '
if (vlanArg1 == "access-map"):
# debugOutput("access-map ")
command = command + vlanArg1 + ' '
value = cnos.checkSanityofVariable(deviceType, "vlan_access_map_name",
vlanArg2)
if (value == "ok"):
command = command + vlanArg2
# debugOutput(command)
cmd = [{'command': command, 'prompt': None, 'answer': None}]
retVal = retVal + vlanAccessMapConfig(module, cmd)
return retVal
else:
retVal = "Error-130"
return retVal
elif (vlanArg1 == "dot1q"):
# debugOutput("dot1q")
command = command + vlanArg1 + " tag native "
if (vlanArg2 is not None):
value = cnos.checkSanityofVariable(deviceType, "vlan_dot1q_tag",
vlanArg2)
if (value == "ok"):
command = command + vlanArg2
else:
retVal = "Error-131"
return retVal
elif (vlanArg1 == "filter"):
# debugOutput( "filter")
command = command + vlanArg1 + " "
if (vlanArg2 is not None):
value = cnos.checkSanityofVariable(deviceType, "vlan_filter_name",
vlanArg2)
if (value == "ok"):
command = command + vlanArg2 + " vlan-list "
value = cnos.checkSanityofVariable(deviceType, "vlan_id",
vlanArg3)
if (value == "ok"):
command = command + vlanArg3
else:
value = cnos.checkSanityofVariable(deviceType,
"vlan_id_range",
vlanArg3)
if (value == "ok"):
command = command + vlanArg3
else:
retVal = "Error-133"
return retVal
else:
retVal = "Error-132"
return retVal
else:
value = cnos.checkSanityofVariable(deviceType, "vlan_id", vlanArg1)
if (value == "ok"):
retVal = createVlan(module, '(config-vlan)#', None)
return retVal
else:
value = cnos.checkSanityofVariable(deviceType, "vlan_id_range",
vlanArg1)
if (value == "ok"):
retVal = createVlan(module, '(config-vlan)#', None)
return retVal
retVal = "Error-133"
return retVal
# debugOutput(command)
cmd = [{'command': command, 'prompt': None, 'answer': None}]
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
return retVal
def createVlan(module, prompt, answer):
# vlan config command happens here. It creates if not present
vlanArg1 = module.params['vlanArg1']
vlanArg2 = module.params['vlanArg2']
vlanArg3 = module.params['vlanArg3']
vlanArg4 = module.params['vlanArg4']
vlanArg5 = module.params['vlanArg5']
deviceType = module.params['deviceType']
retVal = ''
command = 'vlan ' + vlanArg1
# debugOutput(command)
cmd = [{'command': command, 'prompt': None, 'answer': None}]
command = ""
if (vlanArg2 == "name"):
# debugOutput("name")
command = vlanArg2 + " "
value = cnos.checkSanityofVariable(deviceType, "vlan_name", vlanArg3)
if (value == "ok"):
value = checkVlanNameNotAssigned(module, prompt, answer)
if (value == "ok"):
command = command + vlanArg3
else:
retVal = retVal + 'VLAN Name is already assigned \n'
command = "\n"
else:
retVal = "Error-139"
return retVal
elif (vlanArg2 == "flood"):
# debugOutput("flood")
command = vlanArg2 + " "
value = cnos.checkSanityofVariable(deviceType, "vlan_flood", vlanArg3)
if (value == "ok"):
command = command + vlanArg3
else:
retVal = "Error-140"
return retVal
elif (vlanArg2 == "state"):
# debugOutput("state")
command = vlanArg2 + " "
value = cnos.checkSanityofVariable(deviceType, "vlan_state", vlanArg3)
if (value == "ok"):
command = command + vlanArg3
else:
retVal = "Error-141"
return retVal
elif (vlanArg2 == "ip"):
# debugOutput("ip")
command = vlanArg2 + " igmp snooping "
# debugOutput("vlanArg3")
if (vlanArg3 is None or vlanArg3 == ""):
# debugOutput("None or empty")
command = command.strip()
elif (vlanArg3 == "fast-leave"):
# debugOutput("fast-leave")
command = command + vlanArg3
elif (vlanArg3 == "last-member-query-interval"):
# debugOutput("last-member-query-interval")
command = command + vlanArg3 + " "
value = cnos.checkSanityofVariable(
deviceType, "vlan_last_member_query_interval", vlanArg4)
if (value == "ok"):
command = command + vlanArg4
else:
retVal = "Error-142"
return retVal
elif (vlanArg3 == "querier"):
# debugOutput("querier")
command = command + vlanArg3 + " "
value = cnos.checkSanityofVariable(deviceType, "vlan_querier",
vlanArg4)
if (value == "ok"):
command = command + vlanArg4
else:
retVal = "Error-143"
return retVal
elif (vlanArg3 == "querier-timeout"):
# debugOutput("querier-timeout")
command = command + vlanArg3 + " "
value = cnos.checkSanityofVariable(deviceType,
"vlan_querier_timeout",
vlanArg4)
if (value == "ok"):
command = command + vlanArg4
else:
retVal = "Error-144"
return retVal
elif (vlanArg3 == "query-interval"):
# debugOutput("query-interval")
command = command + vlanArg3 + " "
value = cnos.checkSanityofVariable(deviceType,
"vlan_query_interval", vlanArg4)
if (value == "ok"):
command = command + vlanArg4
else:
retVal = "Error-145"
return retVal
elif (vlanArg3 == "query-max-response-time"):
# debugOutput("query-max-response-time")
command = command + vlanArg3 + " "
value = cnos.checkSanityofVariable(deviceType,
"vlan_query_max_response_time",
vlanArg4)
if (value == "ok"):
command = command + vlanArg4
else:
retVal = "Error-146"
return retVal
elif (vlanArg3 == "report-suppression"):
# debugOutput("report-suppression")
command = command + vlanArg3
elif (vlanArg3 == "robustness-variable"):
# debugOutput("robustness-variable")
command = command + vlanArg3 + " "
value = cnos.checkSanityofVariable(deviceType,
"vlan_startup_query_count",
vlanArg4)
if (value == "ok"):
command = command + vlanArg4
else:
retVal = "Error-148"
return retVal
elif (vlanArg3 == "startup-query-interval"):
# debugOutput("startup-query-interval")
command = command + vlanArg3 + " "
value = cnos.checkSanityofVariable(deviceType,
"vlan_startup_query_interval",
vlanArg4)
if (value == "ok"):
command = command + vlanArg4
else:
retVal = "Error-149"
return retVal
elif (vlanArg3 == "static-group"):
retVal = "Error-102"
return retVal
elif (vlanArg3 == "version"):
# debugOutput("version")
command = command + vlanArg3 + " "
value = cnos.checkSanityofVariable(deviceType,
"vlan_snooping_version",
vlanArg4)
if (value == "ok"):
command = command + vlanArg4
else:
retVal = "Error-150"
return retVal
elif (vlanArg3 == "mrouter"):
# debugOutput("mrouter")
command = command + vlanArg3 + " interface "
if (vlanArg4 == "ethernet"):
command = command + vlanArg4 + " "
value = cnos.checkSanityofVariable(deviceType,
"vlan_ethernet_interface",
vlanArg5)
if (value == "ok"):
command = command + vlanArg5
else:
retVal = "Error-151"
return retVal
elif (vlanArg4 == "port-aggregation"):
command = command + vlanArg4 + " "
value = cnos.checkSanityofVariable(deviceType,
"vlan_portagg_number",
vlanArg5)
if (value == "ok"):
command = command + vlanArg5
else:
retVal = "Error-152"
return retVal
else:
retVal = "Error-153"
return retVal
else:
command = command + vlanArg3
else:
retVal = "Error-154"
return retVal
inner_cmd = [{'command': command, 'prompt': None, 'answer': None}]
cmd.extend(inner_cmd)
retVal = retVal + str(cnos.run_cnos_commands(module, cmd))
# debugOutput(command)
return retVal
