def save_config(module, result):
result['changed'] = True
if not module.check_mode:
cmd = {'command': 'copy running-config startup-config', 'output': 'text'}
run_commands(module, [cmd])
else:
module.warn('Skipping command `copy running-config startup-config` '
'due to check_mode. Configuration not copied to '
'non-volatile storage')
def save_config(module, result):
result['changed'] = True
if not module.check_mode:
cmd = {'command': 'copy running-config startup-config', 'output': 'text'}
run_commands(module, [cmd])
else:
module.warn('Skipping command `copy running-config startup-config` '
'due to check_mode. Configuration not copied to '
'non-volatile storage')
def validate_vrf(value, module):
out = run_commands(module, ['show vrf'])
configured_vrfs = re.findall(r'^\s+(\w+)(?=\s)', out[0], re.M)
configured_vrfs.append('default')
if value not in configured_vrfs:
module.fail_json(msg='vrf `%s` is not configured on the system' %
value)
def map_config_to_obj(module):
objs = []
output = run_commands(module, ['show vrf'])
lines = output[0].strip().splitlines()[2:]
for l in lines:
if not l:
continue
splitted_line = re.split(r'\s{2,}', l.strip())
if len(splitted_line) == 1:
continue
else:
obj = {}
obj['name'] = splitted_line[0]
obj['rd'] = splitted_line[1]
obj['interfaces'] = None
if len(splitted_line) > 4:
obj['interfaces'] = []
for i in splitted_line[4].split(','):
obj['interfaces'].append(i.strip())
objs.append(obj)
return objs
def map_config_to_obj(module):
config = get_config(module, flags=['| section interface'])
configobj = NetworkConfig(indent=3, contents=config)
match = re.findall(r'^interface (\S+)', config, re.M)
if not match:
return list()
instances = list()
for item in set(match):
command = 'sh int {0} switchport | include Switchport'
switchport_cfg = run_commands(module, command.format(item))[0].split(':')[1].strip()
if switchport_cfg == 'Enabled':
state = 'present'
else:
state = 'absent'
obj = {
'name': item.lower(),
'state': state,
}
obj['access_vlan'] = parse_config_argument(configobj, item, 'switchport access vlan')
obj['native_vlan'] = parse_config_argument(configobj, item, 'switchport trunk native vlan')
obj['trunk_allowed_vlans'] = parse_config_argument(configobj, item, 'switchport trunk allowed vlan')
if obj['access_vlan']:
obj['mode'] = 'access'
else:
obj['mode'] = 'trunk'
instances.append(obj)
return instances
def verify_state(updates, module):
want, have = updates
invalid_state = [('http', 'httpServer'), ('https', 'httpsServer'),
('local_http', 'localHttpServer'),
('socket', 'unixSocketServer')]
timeout = module.params['timeout'] or 30
state = module.params['state']
while invalid_state:
out = run_commands(module,
['show management api http-commands | json'])
for index, item in enumerate(invalid_state):
want_key, eapi_key = item
if want[want_key] is not None:
if want[want_key] == out[0][eapi_key]['running']:
del invalid_state[index]
elif state == 'stopped':
if not out[0][eapi_key]['running']:
del invalid_state[index]
else:
del invalid_state[index]
time.sleep(1)
timeout -= 1
if timeout == 0:
module.fail_json(
msg='timeout expired before eapi running state changed')
def verify_state(updates, module):
want, have = updates
invalid_state = [('http', 'httpServer'),
('https', 'httpsServer'),
('local_http', 'localHttpServer'),
('socket', 'unixSocketServer')]
timeout = module.params['timeout'] or 30
state = module.params['state']
while invalid_state:
out = run_commands(module, ['show management api http-commands | json'])
for index, item in enumerate(invalid_state):
want_key, eapi_key = item
if want[want_key] is not None:
if want[want_key] == out[0][eapi_key]['running']:
del invalid_state[index]
elif state == 'stopped':
if not out[0][eapi_key]['running']:
del invalid_state[index]
else:
del invalid_state[index]
time.sleep(1)
timeout -= 1
if timeout == 0:
module.fail_json(msg='timeout expired before eapi running state changed')
def map_config_to_obj(module):
config = get_config(module, flags=['| section interface'])
configobj = NetworkConfig(indent=3, contents=config)
match = re.findall(r'^interface (\S+)', config, re.M)
if not match:
return list()
instances = list()
for item in set(match):
command = {'command': 'show interfaces {0} switchport | include Switchport'.format(item),
'output': 'text'}
switchport_cfg = run_commands(module, command)[0].split(':')[1].strip()
if switchport_cfg == 'Enabled':
state = 'present'
else:
state = 'absent'
obj = {
'name': item.lower(),
'state': state,
}
obj['access_vlan'] = parse_config_argument(configobj, item, 'switchport access vlan')
obj['native_vlan'] = parse_config_argument(configobj, item, 'switchport trunk native vlan')
obj['trunk_allowed_vlans'] = parse_config_argument(configobj, item, 'switchport trunk allowed vlan')
if obj['access_vlan']:
obj['mode'] = 'access'
else:
obj['mode'] = 'trunk'
instances.append(obj)
return instances
def main():
"""entry point for module execution
"""
argument_spec = dict(
commands=dict(type='list', required=True),
wait_for=dict(type='list', aliases=['waitfor']),
match=dict(default='all', choices=['all', 'any']),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int')
)
argument_spec.update(eos_argument_spec)
module = AnsibleModule(argument_spec=argument_spec,
supports_check_mode=True)
warnings = list()
result = {'changed': False, 'warnings': warnings}
commands = parse_commands(module, warnings)
wait_for = module.params['wait_for'] or list()
try:
conditionals = [Conditional(c) for c in wait_for]
except AttributeError as exc:
module.fail_json(msg=to_text(exc))
retries = module.params['retries']
interval = module.params['interval']
match = module.params['match']
while retries > 0:
responses = run_commands(module, commands)
for item in list(conditionals):
if item(responses):
if match == 'any':
conditionals = list()
break
conditionals.remove(item)
if not conditionals:
break
time.sleep(interval)
retries -= 1
if conditionals:
failed_conditions = [item.raw for item in conditionals]
msg = 'One or more conditional statements have not been satisfied'
module.fail_json(msg=msg, failed_conditions=failed_conditions)
result.update({
'stdout': responses,
'stdout_lines': list(to_lines(responses)),
})
module.exit_json(**result)
def has_lldp(module):
output = run_commands(module, ['show lldp'])
is_lldp_enable = False
if len(output) > 0 and "LLDP is not enabled" not in output[0]:
is_lldp_enable = True
return is_lldp_enable
def collect_facts(module, result):
out = run_commands(module, ['show management api http-commands | json'])
facts = dict(eos_eapi_urls=dict())
for each in out[0]['urls']:
intf, url = each.split(' : ')
key = str(intf).strip()
if key not in facts['eos_eapi_urls']:
facts['eos_eapi_urls'][key] = list()
facts['eos_eapi_urls'][key].append(str(url).strip())
result['ansible_facts'] = facts
def collect_facts(module, result):
out = run_commands(module, ['show management api http-commands | json'])
facts = dict(eos_eapi_urls=dict())
for each in out[0]['urls']:
intf, url = each.split(' : ')
key = str(intf).strip()
if key not in facts['eos_eapi_urls']:
facts['eos_eapi_urls'][key] = list()
facts['eos_eapi_urls'][key].append(str(url).strip())
result['ansible_facts'] = facts
def map_config_to_obj(module):
out = run_commands(module, ['show management api http-commands | json'])
return {
'http': out[0]['httpServer']['configured'],
'http_port': out[0]['httpServer']['port'],
'https': out[0]['httpsServer']['configured'],
'https_port': out[0]['httpsServer']['port'],
'local_http': out[0]['localHttpServer']['configured'],
'local_http_port': out[0]['localHttpServer']['port'],
'socket': out[0]['unixSocketServer']['configured'],
'vrf': out[0]['vrf'],
'state': parse_state(out)
}
def map_config_to_obj(module):
out = run_commands(module, ['show management api http-commands | json'])
return {
'http': out[0]['httpServer']['configured'],
'http_port': out[0]['httpServer']['port'],
'https': out[0]['httpsServer']['configured'],
'https_port': out[0]['httpsServer']['port'],
'local_http': out[0]['localHttpServer']['configured'],
'local_http_port': out[0]['localHttpServer']['port'],
'socket': out[0]['unixSocketServer']['configured'],
'vrf': out[0]['vrf'],
'state': parse_state(out)
}
def validate_vrf(value, module):
out = run_commands(module, ['show vrf'])
configured_vrfs = []
lines = out[0].strip().splitlines()[3:]
for l in lines:
if not l:
continue
splitted_line = re.split(r'\s{2,}', l.strip())
if len(splitted_line) > 2:
configured_vrfs.append(splitted_line[0])
configured_vrfs.append('default')
if value not in configured_vrfs:
module.fail_json(msg='vrf `%s` is not configured on the system' % value)
def map_config_to_obj(module, warnings):
config = get_config(module, flags=['| section interface'])
configobj = NetworkConfig(indent=3, contents=config)
match = re.findall(r'^interface (\S+)', config, re.M)
if not match:
return list()
instances = list()
for item in set(match):
command = {
'command':
'show interfaces {0} switchport | include Switchport'.format(item),
'output':
'text'
}
command_result = run_commands(module, command, check_rc=False)
if "Interface does not exist" in command_result[0]:
warnings.append(
"Could not gather switchport information for {0}: {1}".format(
item, command_result[0]))
continue
elif command_result[0] != "":
switchport_cfg = command_result[0].split(':')[1].strip()
if switchport_cfg == 'Enabled':
state = 'present'
else:
state = 'absent'
obj = {
'name': item.lower(),
'state': state,
}
obj['access_vlan'] = parse_config_argument(configobj, item,
'switchport access vlan')
obj['native_vlan'] = parse_config_argument(
configobj, item, 'switchport trunk native vlan')
obj['trunk_allowed_vlans'] = parse_config_argument(
configobj, item, 'switchport trunk allowed vlan')
if obj['access_vlan']:
obj['mode'] = 'access'
else:
obj['mode'] = 'trunk'
instances.append(obj)
return instances
def validate_vrf(value, module):
out = run_commands(module, ['show vrf'])
configured_vrfs = []
lines = out[0].strip().splitlines()[3:]
for l in lines:
if not l:
continue
splitted_line = re.split(r'\s{2,}', l.strip())
if len(splitted_line) > 2:
configured_vrfs.append(splitted_line[0])
configured_vrfs.append('default')
if value not in configured_vrfs:
module.fail_json(msg='vrf `%s` is not configured on the system' % value)
def map_config_to_obj(module):
output = run_commands(module, ['show banner %s' % module.params['banner']])
obj = {'banner': module.params['banner'], 'state': 'absent'}
if output:
if module.params['transport'] == 'eapi':
# On EAPI we need to extract the banner text from dict key
# 'loginBanner'
if module.params['banner'] == 'login':
banner_response_key = 'loginBanner'
else:
banner_response_key = 'motd'
if isinstance(output[0], dict) and banner_response_key in output[0].keys():
obj['text'] = output[0]
else:
obj['text'] = output[0]
obj['state'] = 'present'
return obj
def map_config_to_obj(module):
output = run_commands(module, ['show banner %s' % module.params['banner']])
obj = {'banner': module.params['banner'], 'state': 'absent'}
if output:
if module.params['transport'] == 'eapi':
# On EAPI we need to extract the banner text from dict key
# 'loginBanner'
if module.params['banner'] == 'login':
banner_response_key = 'loginBanner'
else:
banner_response_key = 'motd'
if isinstance(output[0], dict) and banner_response_key in output[0].keys():
obj['text'] = output[0]
else:
obj['text'] = output[0]
obj['state'] = 'present'
return obj
def map_config_to_obj(module):
objs = []
output = run_commands(module, ['show vrf'])
lines = output[0].strip().splitlines()[3:]
out_len = len(lines)
index = 0
while out_len > index:
line = lines[index]
if not line:
continue
splitted_line = re.split(r'\s{2,}', line.strip())
if len(splitted_line) == 1:
index += 1
continue
else:
obj = dict()
obj['name'] = splitted_line[0]
obj['rd'] = splitted_line[1]
obj['interfaces'] = []
if len(splitted_line) > 4:
obj['interfaces'] = []
interfaces = splitted_line[4]
if interfaces.endswith(','):
while interfaces.endswith(','):
# gather all comma separated interfaces
if out_len <= index:
break
index += 1
line = lines[index]
vrf_line = re.split(r'\s{2,}', line.strip())
interfaces += vrf_line[-1]
for i in interfaces.split(','):
obj['interfaces'].append(i.strip().lower())
index += 1
objs.append(obj)
return objs
def main():
""" main entry point for custom module execution
"""
argument_spec = dict()
argument_spec.update(eos_argument_spec)
module = AnsibleModule(argument_spec=argument_spec,
supports_check_mode=True)
module.params['commands'] = ['show run | include ip route']
result = dict(changed=False)
warnings = list()
check_args(module, warnings)
commands = parse_commands(module, warnings)
if warnings:
restul['warnings'] = warnings
responses = run_commands(module, commands)
result['static_routes'] = responses
result['static_routes_lines'] = to_lines(responses)
module.exit_json(**result)
def map_config_to_obj(module):
objs = []
output = run_commands(module, ['show vrf'])
lines = output[0].strip().splitlines()[3:]
out_len = len(lines)
index = 0
while out_len > index:
line = lines[index]
if not line:
continue
splitted_line = re.split(r'\s{2,}', line.strip())
if len(splitted_line) == 1:
index += 1
continue
else:
obj = dict()
obj['name'] = splitted_line[0]
obj['rd'] = splitted_line[1]
obj['interfaces'] = []
if len(splitted_line) > 4:
obj['interfaces'] = []
interfaces = splitted_line[4]
if interfaces.endswith(','):
while interfaces.endswith(','):
# gather all comma separated interfaces
if out_len <= index:
break
index += 1
line = lines[index]
vrf_line = re.split(r'\s{2,}', line.strip())
interfaces += vrf_line[-1]
for i in interfaces.split(','):
obj['interfaces'].append(i.strip().lower())
index += 1
objs.append(obj)
return objs
def map_config_to_obj(module):
objs = []
try:
out = run_commands(module, ['show ip route | json'])[0]
except IndexError:
out = {}
if out:
try:
vrfs = out['vrfs']['default']['routes']
except (AttributeError, KeyError, TypeError):
vrfs = {}
if vrfs:
for address in vrfs:
obj = {}
obj['address'] = address
obj['admin_distance'] = vrfs[address].get('preference')
obj['next_hop'] = vrfs[address].get('vias')[0].get('nexthopAddr')
objs.append(obj)
return objs
def map_config_to_obj(module):
objs = []
vlans = run_commands(module, ['show vlan conf | json'])
for vlan in vlans[0]['vlans']:
obj = {}
obj['vlan_id'] = vlan
obj['name'] = vlans[0]['vlans'][vlan]['name']
obj['state'] = vlans[0]['vlans'][vlan]['status']
obj['interfaces'] = []
interfaces = vlans[0]['vlans'][vlan]
for interface in interfaces['interfaces']:
obj['interfaces'].append(interface)
if obj['state'] == 'suspended':
obj['state'] = 'suspend'
objs.append(obj)
return objs
def map_config_to_obj(module):
objs = []
output = run_commands(module, ['show vlan'])
lines = output[0].strip().splitlines()[2:]
for l in lines:
splitted_line = re.split(r'\s{2,}', l.strip())
obj = {}
obj['vlan_id'] = splitted_line[0]
obj['name'] = splitted_line[1]
obj['state'] = splitted_line[2]
if obj['state'] == 'suspended':
obj['state'] = 'suspend'
obj['interfaces'] = []
if len(splitted_line) > 3:
for i in splitted_line[3].split(','):
obj['interfaces'].append(i.strip().replace('Et', 'ethernet'))
objs.append(obj)
return objs
def show(self, sh_cmd):
cmd = {"command": sh_cmd, "output": "json"}
result = run_commands(self.module, [cmd])
return result[0]
def main():
""" main entry point for module execution
"""
backup_spec = dict(filename=dict(), dir_path=dict(type='path'))
argument_spec = dict(
src=dict(type='path'),
lines=dict(aliases=['commands'], type='list'),
parents=dict(type='list'),
before=dict(type='list'),
after=dict(type='list'),
match=dict(default='line', choices=['line', 'strict', 'exact',
'none']),
replace=dict(default='line', choices=['line', 'block', 'config']),
defaults=dict(type='bool', default=False),
backup=dict(type='bool', default=False),
backup_options=dict(type='dict', options=backup_spec),
save_when=dict(choices=['always', 'never', 'modified', 'changed'],
default='never'),
diff_against=dict(
choices=['startup', 'session', 'intended', 'running'],
default='session'),
diff_ignore_lines=dict(type='list'),
running_config=dict(aliases=['config']),
intended_config=dict(),
)
argument_spec.update(eos_argument_spec)
mutually_exclusive = [('lines', 'src'), ('parents', 'src')]
required_if = [('match', 'strict', ['lines']),
('match', 'exact', ['lines']),
('replace', 'block', ['lines']),
('replace', 'config', ['src']),
('diff_against', 'intended', ['intended_config'])]
module = AnsibleModule(argument_spec=argument_spec,
mutually_exclusive=mutually_exclusive,
required_if=required_if,
supports_check_mode=True)
warnings = list()
check_args(module, warnings)
result = {'changed': False}
if warnings:
result['warnings'] = warnings
diff_ignore_lines = module.params['diff_ignore_lines']
config = None
contents = None
flags = ['all'] if module.params['defaults'] else []
connection = get_connection(module)
if module.params['backup'] or (module._diff and
module.params['diff_against'] == 'running'):
contents = get_config(module, flags=flags)
config = NetworkConfig(indent=1, contents=contents)
if module.params['backup']:
result['__backup__'] = contents
if any((module.params['src'], module.params['lines'])):
match = module.params['match']
replace = module.params['replace']
path = module.params['parents']
candidate = get_candidate(module)
running = get_running_config(module, contents, flags=flags)
try:
response = connection.get_diff(candidate=candidate,
running=running,
diff_match=match,
diff_ignore_lines=diff_ignore_lines,
path=path,
diff_replace=replace)
except ConnectionError as exc:
module.fail_json(msg=to_text(exc, errors='surrogate_then_replace'))
config_diff = response['config_diff']
if config_diff:
commands = config_diff.split('\n')
if module.params['before']:
commands[:0] = module.params['before']
if module.params['after']:
commands.extend(module.params['after'])
result['commands'] = commands
result['updates'] = commands
replace = module.params['replace'] == 'config'
commit = not module.check_mode
response = load_config(module,
commands,
replace=replace,
commit=commit)
if 'diff' in response and module.params[
'diff_against'] == 'session':
result['diff'] = {'prepared': response['diff']}
if 'session' in response:
result['session'] = response['session']
result['changed'] = True
running_config = module.params['running_config']
startup_config = None
if module.params['save_when'] == 'always':
save_config(module, result)
elif module.params['save_when'] == 'modified':
output = run_commands(module, [{
'command': 'show running-config',
'output': 'text'
}, {
'command': 'show startup-config',
'output': 'text'
}])
running_config = NetworkConfig(indent=3,
contents=output[0],
ignore_lines=diff_ignore_lines)
startup_config = NetworkConfig(indent=3,
contents=output[1],
ignore_lines=diff_ignore_lines)
if running_config.sha1 != startup_config.sha1:
save_config(module, result)
elif module.params['save_when'] == 'changed' and result['changed']:
save_config(module, result)
if module._diff:
if not running_config:
output = run_commands(module, {
'command': 'show running-config',
'output': 'text'
})
contents = output[0]
else:
contents = running_config
# recreate the object in order to process diff_ignore_lines
running_config = NetworkConfig(indent=3,
contents=contents,
ignore_lines=diff_ignore_lines)
if module.params['diff_against'] == 'running':
if module.check_mode:
module.warn(
"unable to perform diff against running-config due to check mode"
)
contents = None
else:
contents = config.config_text
elif module.params['diff_against'] == 'startup':
if not startup_config:
output = run_commands(module, {
'command': 'show startup-config',
'output': 'text'
})
contents = output[0]
else:
contents = startup_config.config_text
elif module.params['diff_against'] == 'intended':
contents = module.params['intended_config']
if contents is not None:
base_config = NetworkConfig(indent=3,
contents=contents,
ignore_lines=diff_ignore_lines)
if running_config.sha1 != base_config.sha1:
if module.params['diff_against'] == 'intended':
before = running_config
after = base_config
elif module.params['diff_against'] in ('startup', 'running'):
before = base_config
after = running_config
result.update({
'changed': True,
'diff': {
'before': str(before),
'after': str(after)
}
})
module.exit_json(**result)
def check_declarative_intent_params(module, want, result):
failed_conditions = []
have_neighbors = None
for w in want:
want_state = w.get('state')
want_tx_rate = w.get('tx_rate')
want_rx_rate = w.get('rx_rate')
want_neighbors = w.get('neighbors')
if want_state not in ('up', 'down') and not want_tx_rate and not want_rx_rate and not want_neighbors:
continue
if result['changed']:
sleep(w['delay'])
command = {'command': 'show interfaces %s' % w['name'], 'output': 'text'}
output = run_commands(module, [command])
if want_state in ('up', 'down'):
match = re.search(r'%s (\w+)' % 'line protocol is', output[0], re.M)
have_state = None
if match:
have_state = match.group(1)
if have_state is None or not conditional(want_state, have_state.strip()):
failed_conditions.append('state ' + 'eq(%s)' % want_state)
if want_tx_rate:
match = re.search(r'%s (\d+)' % 'output rate', output[0], re.M)
have_tx_rate = None
if match:
have_tx_rate = match.group(1)
if have_tx_rate is None or not conditional(want_tx_rate, have_tx_rate.strip(), cast=int):
failed_conditions.append('tx_rate ' + want_tx_rate)
if want_rx_rate:
match = re.search(r'%s (\d+)' % 'input rate', output[0], re.M)
have_rx_rate = None
if match:
have_rx_rate = match.group(1)
if have_rx_rate is None or not conditional(want_rx_rate, have_rx_rate.strip(), cast=int):
failed_conditions.append('rx_rate ' + want_rx_rate)
if want_neighbors:
have_host = []
have_port = []
if have_neighbors is None:
command = {'command': 'show lldp neighbors {}'.format(w['name']), 'output': 'text'}
have_neighbors = run_commands(module, [command])
if have_neighbors[0]:
lines = have_neighbors[0].strip().split('\n')
col = None
for index, line in enumerate(lines):
if re.search(r"^Port\s+Neighbor Device ID\s+Neighbor Port ID\s+TTL", line):
col = index
break
if col and col < len(lines) - 1:
for items in lines[col + 1:]:
value = re.split(r'\s+', items)
try:
have_port.append(value[2])
have_host.append(value[1])
except IndexError:
pass
for item in want_neighbors:
host = item.get('host')
port = item.get('port')
if host and host not in have_host:
failed_conditions.append('host ' + host)
if port and port not in have_port:
failed_conditions.append('port ' + port)
return failed_conditions
def main():
""" main entry point for module execution
"""
argument_spec = dict(
src=dict(type='path'),
lines=dict(aliases=['commands'], type='list'),
parents=dict(type='list'),
before=dict(type='list'),
after=dict(type='list'),
match=dict(default='line', choices=['line', 'strict', 'exact', 'none']),
replace=dict(default='line', choices=['line', 'block', 'config']),
defaults=dict(type='bool', default=False),
backup=dict(type='bool', default=False),
save_when=dict(choices=['always', 'never', 'modified', 'changed'], default='never'),
diff_against=dict(choices=['startup', 'session', 'intended', 'running'], default='session'),
diff_ignore_lines=dict(type='list'),
running_config=dict(aliases=['config']),
intended_config=dict(),
# save is deprecated as of ans2.4, use save_when instead
save=dict(default=False, type='bool', removed_in_version='2.8'),
# force argument deprecated in ans2.2
force=dict(default=False, type='bool', removed_in_version='2.6')
)
argument_spec.update(eos_argument_spec)
mutually_exclusive = [('lines', 'src'),
('parents', 'src'),
('save', 'save_when')]
required_if = [('match', 'strict', ['lines']),
('match', 'exact', ['lines']),
('replace', 'block', ['lines']),
('replace', 'config', ['src']),
('diff_against', 'intended', ['intended_config'])]
module = AnsibleModule(argument_spec=argument_spec,
mutually_exclusive=mutually_exclusive,
required_if=required_if,
supports_check_mode=True)
warnings = list()
check_args(module, warnings)
result = {'changed': False}
if warnings:
result['warnings'] = warnings
config = None
if module.params['backup'] or (module._diff and module.params['diff_against'] == 'running'):
contents = get_config(module)
config = NetworkConfig(indent=3, contents=contents)
if module.params['backup']:
result['__backup__'] = contents
if any((module.params['src'], module.params['lines'])):
match = module.params['match']
replace = module.params['replace']
candidate = get_candidate(module)
if match != 'none' and replace != 'config':
config_text = get_running_config(module)
config = NetworkConfig(indent=3, contents=config_text)
path = module.params['parents']
configobjs = candidate.difference(config, match=match, replace=replace, path=path)
else:
configobjs = candidate.items
if configobjs:
commands = dumps(configobjs, 'commands').split('\n')
if module.params['before']:
commands[:0] = module.params['before']
if module.params['after']:
commands.extend(module.params['after'])
result['commands'] = commands
result['updates'] = commands
replace = module.params['replace'] == 'config'
commit = not module.check_mode
response = load_config(module, commands, replace=replace, commit=commit)
if 'diff' in response and module.params['diff_against'] == 'session':
result['diff'] = {'prepared': response['diff']}
if 'session' in response:
result['session'] = response['session']
result['changed'] = True
running_config = None
startup_config = None
diff_ignore_lines = module.params['diff_ignore_lines']
if module.params['save_when'] == 'always' or module.params['save']:
save_config(module, result)
elif module.params['save_when'] == 'modified':
output = run_commands(module, [{'command': 'show running-config', 'output': 'text'},
{'command': 'show startup-config', 'output': 'text'}])
running_config = NetworkConfig(indent=1, contents=output[0], ignore_lines=diff_ignore_lines)
startup_config = NetworkConfig(indent=1, contents=output[1], ignore_lines=diff_ignore_lines)
if running_config.sha1 != startup_config.sha1:
save_config(module, result)
elif module.params['save_when'] == 'changed' and result['changed']:
save_config(module, result)
if module._diff:
if not running_config:
output = run_commands(module, {'command': 'show running-config', 'output': 'text'})
contents = output[0]
else:
contents = running_config.config_text
# recreate the object in order to process diff_ignore_lines
running_config = NetworkConfig(indent=1, contents=contents, ignore_lines=diff_ignore_lines)
if module.params['diff_against'] == 'running':
if module.check_mode:
module.warn("unable to perform diff against running-config due to check mode")
contents = None
else:
contents = config.config_text
elif module.params['diff_against'] == 'startup':
if not startup_config:
output = run_commands(module, {'command': 'show startup-config', 'output': 'text'})
contents = output[0]
else:
contents = startup_config.config_text
elif module.params['diff_against'] == 'intended':
contents = module.params['intended_config']
if contents is not None:
base_config = NetworkConfig(indent=1, contents=contents, ignore_lines=diff_ignore_lines)
if running_config.sha1 != base_config.sha1:
if module.params['diff_against'] == 'intended':
before = running_config
after = base_config
elif module.params['diff_against'] in ('startup', 'running'):
before = base_config
after = running_config
result.update({
'changed': True,
'diff': {'before': str(before), 'after': str(after)}
})
module.exit_json(**result)
def populate(self):
self.responses = run_commands(self.module, list(self.COMMANDS))
def main():
"""entry point for module execution
"""
argument_spec = dict(
commands=dict(type='list', required=True),
wait_for=dict(type='list', aliases=['waitfor']),
match=dict(default='all', choices=['all', 'any']),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int')
)
argument_spec.update(eos_argument_spec)
module = AnsibleModule(argument_spec=argument_spec,
supports_check_mode=True)
result = {'changed': False}
warnings = list()
check_args(module, warnings)
commands = parse_commands(module, warnings)
if warnings:
result['warnings'] = warnings
wait_for = module.params['wait_for'] or list()
try:
conditionals = [Conditional(c) for c in wait_for]
except AttributeError as exc:
module.fail_json(msg=to_native(exc))
retries = module.params['retries']
interval = module.params['interval']
match = module.params['match']
while retries > 0:
responses = run_commands(module, commands)
for item in list(conditionals):
if item(responses):
if match == 'any':
conditionals = list()
break
conditionals.remove(item)
if not conditionals:
break
time.sleep(interval)
retries -= 1
if conditionals:
failed_conditions = [item.raw for item in conditionals]
msg = 'One or more conditional statements have not been satisfied'
module.fail_json(msg=msg, failed_conditions=failed_conditions)
result.update({
'changed': False,
'stdout': responses,
'stdout_lines': to_lines(responses)
})
module.exit_json(**result)
def populate(self):
self.responses = run_commands(self.module,
list(self.COMMANDS),
check_rc=False)
def populate(self):
self.responses = run_commands(self.module, list(self.COMMANDS))
def main():
""" main entry point for module execution
"""
argument_spec = dict(
src=dict(type='path'),
lines=dict(aliases=['commands'], type='list'),
parents=dict(type='list'),
before=dict(type='list'),
after=dict(type='list'),
match=dict(default='line', choices=['line', 'strict', 'exact',
'none']),
replace=dict(default='line', choices=['line', 'block', 'config']),
defaults=dict(type='bool', default=False),
backup=dict(type='bool', default=False),
save_when=dict(choices=['always', 'never', 'modified', 'changed'],
default='never'),
diff_against=dict(
choices=['startup', 'session', 'intended', 'running'],
default='session'),
diff_ignore_lines=dict(type='list'),
running_config=dict(aliases=['config']),
intended_config=dict(),
# save is deprecated as of ans2.4, use save_when instead
save=dict(default=False, type='bool', removed_in_version='2.8'),
# force argument deprecated in ans2.2
force=dict(default=False, type='bool', removed_in_version='2.6'))
argument_spec.update(eos_argument_spec)
mutually_exclusive = [('lines', 'src'), ('parents', 'src'),
('save', 'save_when')]
required_if = [('match', 'strict', ['lines']),
('match', 'exact', ['lines']),
('replace', 'block', ['lines']),
('replace', 'config', ['src']),
('diff_against', 'intended', ['intended_config'])]
module = AnsibleModule(argument_spec=argument_spec,
mutually_exclusive=mutually_exclusive,
required_if=required_if,
supports_check_mode=True)
warnings = list()
check_args(module, warnings)
result = {'changed': False}
if warnings:
result['warnings'] = warnings
config = None
if module.params['backup'] or (module._diff and
module.params['diff_against'] == 'running'):
contents = get_config(module)
config = NetworkConfig(indent=3, contents=contents)
if module.params['backup']:
result['__backup__'] = contents
if any((module.params['src'], module.params['lines'])):
match = module.params['match']
replace = module.params['replace']
candidate = get_candidate(module)
if match != 'none' and replace != 'config':
config_text = get_running_config(module)
config = NetworkConfig(indent=3, contents=config_text)
path = module.params['parents']
configobjs = candidate.difference(config,
match=match,
replace=replace,
path=path)
else:
configobjs = candidate.items
if configobjs:
commands = dumps(configobjs, 'commands').split('\n')
if module.params['before']:
commands[:0] = module.params['before']
if module.params['after']:
commands.extend(module.params['after'])
result['commands'] = commands
result['updates'] = commands
replace = module.params['replace'] == 'config'
commit = not module.check_mode
response = load_config(module,
commands,
replace=replace,
commit=commit)
if 'diff' in response and module.params[
'diff_against'] == 'session':
result['diff'] = {'prepared': response['diff']}
if 'session' in response:
result['session'] = response['session']
result['changed'] = True
running_config = None
startup_config = None
diff_ignore_lines = module.params['diff_ignore_lines']
if module.params['save_when'] == 'always' or module.params['save']:
save_config(module, result)
elif module.params['save_when'] == 'modified':
output = run_commands(module, [{
'command': 'show running-config',
'output': 'text'
}, {
'command': 'show startup-config',
'output': 'text'
}])
running_config = NetworkConfig(indent=1,
contents=output[0],
ignore_lines=diff_ignore_lines)
startup_config = NetworkConfig(indent=1,
contents=output[1],
ignore_lines=diff_ignore_lines)
if running_config.sha1 != startup_config.sha1:
save_config(module, result)
elif module.params['save_when'] == 'changed' and result['changed']:
save_config(module, result)
if module._diff:
if not running_config:
output = run_commands(module, {
'command': 'show running-config',
'output': 'text'
})
contents = output[0]
else:
contents = running_config.config_text
# recreate the object in order to process diff_ignore_lines
running_config = NetworkConfig(indent=1,
contents=contents,
ignore_lines=diff_ignore_lines)
if module.params['diff_against'] == 'running':
if module.check_mode:
module.warn(
"unable to perform diff against running-config due to check mode"
)
contents = None
else:
contents = config.config_text
elif module.params['diff_against'] == 'startup':
if not startup_config:
output = run_commands(module, {
'command': 'show startup-config',
'output': 'text'
})
contents = output[0]
else:
contents = startup_config.config_text
elif module.params['diff_against'] == 'intended':
contents = module.params['intended_config']
if contents is not None:
base_config = NetworkConfig(indent=1,
contents=contents,
ignore_lines=diff_ignore_lines)
if running_config.sha1 != base_config.sha1:
if module.params['diff_against'] == 'intended':
before = running_config
after = base_config
elif module.params['diff_against'] in ('startup', 'running'):
before = base_config
after = running_config
result.update({
'changed': True,
'diff': {
'before': str(before),
'after': str(after)
}
})
module.exit_json(**result)