def client_proc(computation, coro=None):
# use RemoteCoroScheduler to schedule/submit coroutines; scheduler must be
# created before computation is scheduled (next step below)
rcoro_scheduler = RemoteCoroScheduler(computation)
# in discoro_client6.py, data is sent to each remote coroutine; here, data
# is broadcast over channel and remote coroutines subscribe to it
data_channel = asyncoro.Channel('data_channel')
# not necessary to register channel in this case, as it is sent to remote
# coroutines; if they were to 'locate' it, it should be registered
# data_channel.register()
trend_coro = asyncoro.Coro(trend_proc)
rcoro_avg = yield rcoro_scheduler.schedule(rcoro_avg_proc, data_channel,
0.4, trend_coro, 10)
assert isinstance(rcoro_avg, asyncoro.Coro)
rcoro_save = yield rcoro_scheduler.schedule(rcoro_save_proc, data_channel)
assert isinstance(rcoro_save, asyncoro.Coro)
# make sure both remote coroutines have subscribed to channel ('deliver'
# should return 2 if they both are)
assert (yield data_channel.deliver('start', n=2)) == 2
# if data is sent frequently (say, many times a second), enable
# streaming data to remote peer; this is more efficient as
# connections are kept open (so the cost of opening and closing
# connections is avoided), but keeping too many connections open
# consumes system resources
yield asyncoro.AsynCoro.instance().peer(rcoro_avg.location,
stream_send=True)
yield asyncoro.AsynCoro.instance().peer(rcoro_save.location,
stream_send=True)
# send 1000 items of random data to remote coroutines
for i in range(1000):
n = random.uniform(-1, 1)
item = (i, n)
# data can be sent to remote coroutines either with 'send' or
# 'deliver'; 'send' is more efficient but no guarantee data
# has been sent successfully whereas 'deliver' indicates
# errors right away
data_channel.send(item)
yield coro.sleep(0.02)
item = (i, None)
data_channel.send(item)
yield rcoro_scheduler.finish(close=True)
data_channel.close()
def client_proc(computation, njobs, coro=None):
# use RemoteCoroScheduler to start coroutines at servers (should be done
# before scheduling computation)
rcoro_scheduler = RemoteCoroScheduler(computation)
# send 5 requests to remote process (compute_coro)
def send_requests(rcoro, coro=None):
# first send this local coroutine (to whom rcoro sends result)
rcoro.send(coro)
for i in range(5):
# even if recipient doesn't use "yield" (such as executing long-run
# computation, or thread-blocking function such as 'time.sleep' as
# in this case), the message is accepted by another scheduler
# (_ReactAsynCoro_) at the receiver and put in recipient's message
# queue
rcoro.send(random.uniform(10, 20))
# assume delay in input availability
yield coro.sleep(random.uniform(2, 5))
# end of input is indicated with None
rcoro.send(None)
result = yield coro.receive() # get result
print(' %s computed result: %.4f' % (rcoro.location, result))
for i in range(njobs):
rcoro = yield rcoro_scheduler.schedule(compute_coro)
if isinstance(rcoro, asyncoro.Coro):
print(' job %d processed by %s' % (i, rcoro.location))
asyncoro.Coro(send_requests, rcoro)
yield rcoro_scheduler.finish(close=True)
def client_proc(computation, njobs, coro=None):
# use RemoteCoroScheduler to schedule/submit coroutines; scheduler must be
# created before computation is scheduled (next step below)
rcoro_scheduler = RemoteCoroScheduler(computation)
# create a separate coroutine to receive results, so they can be processed
# as soon as received
def recv_results(coro=None):
for i in range(njobs):
msg = yield coro.receive()
print(' result for job %d: %s' % (i, msg))
# remote coroutines send replies as messages to this coro
results_coro = asyncoro.Coro(recv_results)
# submit njobs; each job will be executed by one discoro server
for i in range(njobs):
cobj = C(i)
cobj.n = random.uniform(5, 10)
# as noted in 'discoro_client1.py', 'schedule' method is used to run
# jobs sequentially; use 'submit' to run multiple jobs on one server
# concurrently
print(' request %d: %s' % (i, cobj.n))
rcoro = yield rcoro_scheduler.schedule(compute, cobj, results_coro)
if not isinstance(rcoro, asyncoro.Coro):
print('failed to create rcoro %s: %s' % (i, rcoro))
# wait for all results and close computation
yield rcoro_scheduler.finish(close=True)
def client_proc(computation, coro=None):
def status_proc(coro=None):
coro.set_daemon()
while True:
msg = yield coro.receive()
# send message to RemoteCoroScheduler's status_proc:
job_scheduler.status_coro.send(msg)
# and to httpd's status_coro:
httpd.status_coro.send(msg)
if isinstance(msg, asyncoro.MonitorException):
if msg.args[1][0] == StopIteration:
print('result from %s: %s' % (msg.args[0].location, msg.args[1][1]))
else:
# if computation is reentrant, resubmit this job
# (keep track of submitted rcoro, args and kwargs)
print('%s failed: %s' % (msg.args[0], msg.args[1][1]))
job_scheduler = RemoteCoroScheduler(computation)
computation.status_coro = asyncoro.Coro(status_proc)
if (yield computation.schedule()):
raise Exception('schedule failed')
# submit jobs
for i in range(3):
rcoro = yield job_scheduler.schedule(compute, random.uniform(10, 20))
# wait for all jobs to be done and close computation
yield job_scheduler.finish(close=True)
def client_proc(computation, data_file, njobs, coro=None):
proc_setup_coros = set() # processes used are kept track to cleanup when done
# coroutine receives status messages from rcoro_scheduler. If the status is
# ServerInitialized, send the file to server and wait for initialization
def status_proc(status, info, coro=None):
if status != discoro.Scheduler.ServerInitialized:
raise StopIteration(0)
if (yield asyncoro.AsynCoro().send_file(info, data_file, timeout=10)) < 0:
print('Could not send data file "%s" to %s' % (data_file, info))
raise StopIteration
rcoro = yield rcoro_scheduler.submit_at(info, proc_setup, data_file, coro)
if isinstance(rcoro, asyncoro.Coro):
msg = yield coro.receive()
if msg == "ready":
proc_setup_coros.add(rcoro)
raise StopIteration(0) # success indicated with 0
else:
raise StopIteration(-1) # scheduler won't use this server
else:
print("Setup of %s failed" % where)
raise StopIteration(-1) # scheduler won't use this server
rcoro_scheduler = RemoteCoroScheduler(computation, status_proc)
if (yield computation.schedule()):
raise Exception("Failed to schedule computation")
# remote coroutines send results to this coroutine
def results_proc(coro=None):
done = 0
while done < njobs:
msg = yield coro.receive()
if isinstance(msg, tuple) and len(msg) == 2:
print("%s checksum: %s" % (msg[0], msg[1]))
done += 1
results_coro = asyncoro.Coro(results_proc)
algs = ["md5", "sha1", "sha224", "sha256", "sha384", "sha512"]
submitted = 0
while submitted < njobs:
alg = algs[submitted % len(algs)]
rcoro = yield rcoro_scheduler.schedule(rcoro_proc, alg, random.uniform(1, 5), results_coro)
if isinstance(rcoro, asyncoro.Coro):
submitted += 1
# wait for results to be received
yield results_coro.finish()
# cleanup processes
for proc_setup_coro in proc_setup_coros:
yield proc_setup_coro.deliver("cleanup", timeout=5)
yield rcoro_scheduler.finish(close=True)
def client_proc(computation, coro=None):
# use RemoteCoroScheduler to schedule/submit coroutines; scheduler must be
# created before computation is scheduled (next step below)
rcoro_scheduler = RemoteCoroScheduler(computation)
trend_coro = asyncoro.Coro(trend_proc)
rcoro_avg = yield rcoro_scheduler.schedule(rcoro_avg_proc, 0.4, trend_coro,
10)
assert isinstance(rcoro_avg, asyncoro.Coro)
rcoro_save = yield rcoro_scheduler.schedule(rcoro_save_proc)
assert isinstance(rcoro_save, asyncoro.Coro)
# if data is sent frequently (say, many times a second), enable
# streaming data to remote peer; this is more efficient as
# connections are kept open (so the cost of opening and closing
# connections is avoided), but keeping too many connections open
# consumes system resources
yield asyncoro.AsynCoro.instance().peer(rcoro_avg.location,
stream_send=True)
yield asyncoro.AsynCoro.instance().peer(rcoro_save.location,
stream_send=True)
# send 1000 items of random data to remote coroutines
for i in range(1000):
n = random.uniform(-1, 1)
item = (i, n)
# data can be sent to remote coroutines either with 'send' or
# 'deliver'; 'send' is more efficient but no guarantee data
# has been sent successfully whereas 'deliver' indicates
# errors right away; alternately, messages can be sent with a
# channel, which is more convenient if there are multiple
# (unknown) recipients
rcoro_avg.send(item)
rcoro_save.send(item)
yield coro.sleep(0.01)
item = (i, None)
rcoro_avg.send(item)
rcoro_save.send(item)
yield rcoro_scheduler.finish(close=True)
def submit_jobs_proc(computation, njobs, coro=None):
# use RemoteCoroScheduler to schedule/submit coroutines; scheduler must be
# created before computation is scheduled (next step below)
rcoro_scheduler = RemoteCoroScheduler(computation)
for i in range(njobs):
# create remote coroutine
rcoro = yield rcoro_scheduler.schedule(rcoro_proc)
if isinstance(rcoro, asyncoro.Coro):
# create local coroutine to send input file and data to rcoro
asyncoro.Coro(client_proc, i, rcoro)
yield rcoro_scheduler.finish(close=True)
def client_proc(computation, njobs, coro=None):
# create rcoro scheduler; this replaces computation's current staus_coro (in
# this case httpd status_coro) with coro that chains messages
rcoro_scheduler = RemoteCoroScheduler(computation)
# submit jobs
for i in range(njobs):
rcoro = yield rcoro_scheduler.schedule(compute, random.uniform(5, 10))
if isinstance(rcoro, asyncoro.Coro):
print(' job %s processed by %s' % (i, rcoro.location))
else:
print('rcoro %s failed: %s' % (i, rcoro))
# wait for all jobs to be done and close computation
yield rcoro_scheduler.finish(close=True)
def client_proc(computation, njobs, coro=None):
# use RemoteCoroScheduler to schedule/submit coroutines; scheduler must be
# created before computation is scheduled (next step below)
rcoro_scheduler = RemoteCoroScheduler(computation)
# schedule computation (if scheduler is shared, this waits until
# prior computations are finished)
if (yield computation.schedule()):
raise Exception('Failed to schedule computation')
# create njobs remote coroutines
for n in range(njobs):
rcoro = yield rcoro_scheduler.schedule(rcoro_proc, random.uniform(5, 10))
# scheduler will wait until all remote coroutines finish
yield rcoro_scheduler.finish(close=True)
def client_proc(computation, njobs, coro=None):
proc_setup_coros = set() # processes used are kept track to cleanup when done
# coroutine receives status messages from rcoro_scheduler. If the status is
# ServerInitialized, send the file to server and wait for initialization
def status_proc(status, info, coro=None):
if status != discoro.Scheduler.ServerInitialized:
raise StopIteration(0)
rcoro = yield rcoro_scheduler.submit_at(info, proc_setup, coro)
if isinstance(rcoro, asyncoro.Coro):
msg = yield coro.receive()
if msg == 'ready':
proc_setup_coros.add(rcoro)
raise StopIteration(0) # success indicated with 0
else:
raise StopIteration(-1) # scheduler won't use this server
else:
print('Setup of %s failed' % info)
raise StopIteration(-1) # scheduler won't use this server
# use RemoteCoroScheduler to start coroutines at servers
rcoro_scheduler = RemoteCoroScheduler(computation, status_proc)
if (yield computation.schedule()):
raise Exception('Failed to schedule computation')
# remote coroutines send results to this coroutine
def results_proc(coro=None):
done = 0
while done < njobs:
msg = yield coro.receive()
if isinstance(msg, tuple) and len(msg) == 2:
print('result from %s: %s' % (msg[0], msg[1]))
done += 1
results_coro = asyncoro.Coro(results_proc)
submitted = 0
while submitted < njobs:
rcoro = yield rcoro_scheduler.schedule(compute_proc, random.uniform(5, 10), results_coro)
if isinstance(rcoro, asyncoro.Coro):
submitted += 1
# wait for results to be received
yield results_coro.finish()
# cleanup processes
for proc_setup_coro in proc_setup_coros:
yield proc_setup_coro.deliver('cleanup', timeout=5)
yield rcoro_scheduler.finish(close=True)
def client_proc(computation, coro=None):
def results_proc(coro=None):
coro.set_daemon()
while True:
result = yield coro.receive()
print('result: %s' % result)
job_scheduler = RemoteCoroScheduler(computation)
results_coro = asyncoro.Coro(results_proc)
if (yield computation.schedule()):
raise Exception('schedule failed')
# submit jobs
for i in range(5):
rcoro = yield job_scheduler.schedule(compute, random.uniform(3, 10), results_coro)
# wait for all results
yield job_scheduler.finish()
yield computation.close()
