def __call__(self):
options = self.options
match_probability = RandomMatchProbability()
# Create Adapters
has_adapters1 = options.adapters or options.anywhere or options.front
has_adapters2 = options.adapters2 or options.anywhere2 or options.front2
adapters1 = adapters2 = []
if has_adapters1 or has_adapters2:
adapter_cache = super().load_known_adapters()
parser_args = dict(
colorspace=options.colorspace,
max_error_rate=options.error_rate,
min_overlap=options.overlap,
read_wildcards=options.match_read_wildcards,
adapter_wildcards=options.match_adapter_wildcards,
indels=options.indels, indel_cost=options.indel_cost,
cache=adapter_cache, gc_content=options.gc_content,
match_probability=match_probability, alphabet=options.alphabet)
if options.adapter_max_rmp:
parser_args['max_rmp'] = options.adapter_max_rmp
adapter_parser = AdapterParser(**parser_args)
if has_adapters1:
adapters1 = adapter_parser.parse_multi(
options.adapters, options.anywhere, options.front)
if has_adapters2:
adapters2 = adapter_parser.parse_multi(
options.adapters2, options.anywhere2, options.front2)
if options.cache_adapters:
adapter_cache.save()
# Create Modifiers
# TODO: can this be replaced with an argparse required group?
if (
not adapters1 and not adapters2 and
not options.quality_cutoff and
options.nextseq_trim is None and
options.cut == [] and options.cut2 == [] and
options.cut_min == [] and options.cut_min2 == [] and
(
options.minimum_length is None or
options.minimum_length <= 0) and
options.maximum_length == sys.maxsize and not options.trim_n and
not self.has_qualfile and options.max_n is None and
(not options.paired or options.overwrite_low_quality is None)):
raise ValueError(
"You need to provide at least one adapter sequence.")
if (
options.aligner == 'insert' and any(
not a or len(a) != 1 or a[0].where != BACK
for a in (adapters1, adapters2))):
raise ValueError(
"Insert aligner requires a single 3' adapter for each read")
if options.debug:
for adapter in adapters1 + adapters2:
adapter.enable_debug()
if options.paired:
modifiers = PairedEndModifiers(options.paired)
else:
modifiers = SingleEndModifiers()
for oper in options.op_order:
if oper == 'W' and options.overwrite_low_quality:
lowq, highq, window = options.overwrite_low_quality
modifiers.add_modifier(
OverwriteRead,
worse_read_min_quality=lowq, better_read_min_quality=highq,
window_size=window, base=options.quality_base)
elif oper == 'A' and (adapters1 or adapters2):
# TODO: generalize this using some kind of factory class
if options.aligner == 'insert':
# Use different base probabilities if we're trimming
# bisulfite data.
# TODO: this doesn't seem to help things, so commenting it
# out for now
#if options.bisulfite:
# base_probs = dict(match_prob=0.33, mismatch_prob=0.67)
# else:
# base_probs = dict(match_prob=0.25, mismatch_prob=0.75)
modifiers.add_modifier(
InsertAdapterCutter,
adapter1=adapters1[0], adapter2=adapters2[0],
action=options.action,
mismatch_action=options.correct_mismatches,
max_insert_mismatch_frac=\
options.insert_match_error_rate,
max_adapter_mismatch_frac=\
options.insert_match_adapter_error_rate,
match_probability=match_probability,
insert_max_rmp=options.insert_max_rmp,
read_wildcards=options.match_read_wildcards,
adapter_wildcards=options.match_adapter_wildcards)
else:
a1_args = dict(
adapters=adapters1,
times=options.times,
action=options.action) if adapters1 else None
a2_args = dict(
adapters=adapters2,
times=options.times,
action=options.action) if adapters2 else None
modifiers.add_modifier_pair(AdapterCutter, a1_args, a2_args)
elif oper == 'C' and (options.cut or options.cut2):
modifiers.add_modifier_pair(
UnconditionalCutter,
dict(lengths=options.cut),
dict(lengths=options.cut2))
elif oper == 'G' and (options.nextseq_trim is not None):
modifiers.add_modifier(
NextseqQualityTrimmer,
cutoff=options.nextseq_trim,
base=options.quality_base)
elif oper == 'Q' and options.quality_cutoff:
modifiers.add_modifier(
QualityTrimmer,
cutoff_front=options.quality_cutoff[0],
cutoff_back=options.quality_cutoff[1],
base=options.quality_base)
if options.bisulfite:
if isinstance(options.bisulfite, str):
if "non-directional" in options.bisulfite:
modifiers.add_modifier(
NonDirectionalBisulfiteTrimmer,
rrbs=options.bisulfite=="non-directional-rrbs")
elif options.bisulfite == "rrbs":
modifiers.add_modifier(RRBSTrimmer)
elif options.bisulfite in ("epignome", "truseq"):
# Trimming leads to worse results
#modifiers.add_modifier(TruSeqBisulfiteTrimmer)
pass
elif options.bisulfite == "swift":
modifiers.add_modifier(SwiftBisulfiteTrimmer)
else:
if options.bisulfite[0]:
modifiers.add_modifier(
MinCutter, read=1, **(options.bisulfite[0]))
if len(options.bisulfite) > 1 and options.bisulfite[1]:
modifiers.add_modifier(
MinCutter, read=2, **(options.bisulfite[1]))
if options.trim_n:
modifiers.add_modifier(NEndTrimmer)
if options.cut_min or options.cut_min2:
modifiers.add_modifier_pair(
MinCutter,
dict(lengths=options.cut_min),
dict(lengths=options.cut_min2))
if options.length_tag:
modifiers.add_modifier(
LengthTagModifier, length_tag=options.length_tag)
if options.strip_suffix:
modifiers.add_modifier(SuffixRemover, suffixes=options.strip_suffix)
if options.prefix or options.suffix:
modifiers.add_modifier(
PrefixSuffixAdder, prefix=options.prefix, suffix=options.suffix)
if options.double_encode:
modifiers.add_modifier(DoubleEncoder)
if options.zero_cap and self.delivers_qualities:
modifiers.add_modifier(
ZeroCapper, quality_base=options.quality_base)
if options.trim_primer:
modifiers.add_modifier(PrimerTrimmer)
if options.merge_overlapping:
modifiers.add_modifier(
MergeOverlapping,
min_overlap=options.merge_min_overlap,
error_rate=options.merge_error_rate,
mismatch_action=options.correct_mismatches)
# Create Filters and Formatters
min_affected = 2 if options.pair_filter == 'both' else 1
filters = Filters(FilterFactory(options.paired, min_affected))
output1 = output2 = None
interleaved = False
if options.interleaved_output:
output1 = options.interleaved_output
interleaved = True
else:
output1 = options.output
output2 = options.paired_output
seq_formatter_args = dict(
qualities=self.delivers_qualities,
colorspace=options.colorspace,
interleaved=interleaved
)
formatters = Formatters(output1, seq_formatter_args)
force_create = []
if options.merge_overlapping:
filters.add_filter(MergedReadFilter)
if options.merged_output:
formatters.add_seq_formatter(
MergedReadFilter, options.merged_output)
if options.minimum_length is not None and options.minimum_length > 0:
filters.add_filter(TooShortReadFilter, options.minimum_length)
if options.too_short_output:
formatters.add_seq_formatter(
TooShortReadFilter,
options.too_short_output, options.too_short_paired_output)
if options.maximum_length < sys.maxsize:
filters.add_filter(TooLongReadFilter, options.maximum_length)
if options.too_long_output is not None:
formatters.add_seq_formatter(
TooLongReadFilter,
options.too_long_output, options.too_long_paired_output)
if options.max_n is not None:
filters.add_filter(NContentFilter, options.max_n)
if options.discard_trimmed:
filters.add_filter(TrimmedFilter)
if not formatters.multiplexed:
if output1 is not None:
formatters.add_seq_formatter(NoFilter, output1, output2)
if output1 != STDOUT and options.writer_process:
force_create.append(output1)
if output2 is not None:
force_create.append(output2)
elif not (options.discard_trimmed and options.untrimmed_output):
formatters.add_seq_formatter(NoFilter, options.default_outfile)
if options.default_outfile != STDOUT and options.writer_process:
force_create.append(options.default_outfile)
if options.discard_untrimmed or options.untrimmed_output:
filters.add_filter(UntrimmedFilter)
if not options.discard_untrimmed:
if formatters.multiplexed:
untrimmed = options.untrimmed_output or output1.format(
name='unknown')
formatters.add_seq_formatter(UntrimmedFilter, untrimmed)
formatters.add_seq_formatter(NoFilter, untrimmed)
elif options.untrimmed_output:
formatters.add_seq_formatter(
UntrimmedFilter,
options.untrimmed_output, options.untrimmed_paired_output)
if options.rest_file:
formatters.add_info_formatter(RestFormatter(options.rest_file))
if options.info_file:
formatters.add_info_formatter(InfoFormatter(options.info_file))
if options.wildcard_file:
formatters.add_info_formatter(
WildcardFormatter(options.wildcard_file))
if options.paired:
mixin_class = PairedEndPipelineMixin
else:
mixin_class = SingleEndPipelineMixin
writers = Writers(force_create)
record_handler = RecordHandler(modifiers, filters, formatters)
if options.stats:
record_handler = StatsRecordHandlerWrapper(
record_handler, options.paired, options.stats,
qualities=self.delivers_qualities,
quality_base=self.quality_base)
logger = logging.getLogger()
num_adapters = sum(len(a) for a in modifiers.get_adapters())
logger.info(
"Trimming %s adapter%s with at most %.1f%% errors in %s mode ...",
num_adapters,
's' if num_adapters > 1 else '', options.error_rate * 100,
{
False: 'single-end',
'first': 'paired-end legacy',
'both': 'paired-end'
}[options.paired])
if (
options.paired == 'first' and (
len(record_handler.modifiers.get_modifiers(read=2)) > 0 or
options.quality_cutoff)):
logger.warning('\n'.join(textwrap.wrap(
'Requested read modifications are applied only to the '
'first read since backwards compatibility mode is enabled. '
'To modify both reads, also use any of the -A/-B/-G/-U '
'options. Use a dummy adapter sequence when necessary: '
'-A XXX')))
if options.threads is None:
# Run single-threaded version
result_handler = WorkerResultHandler(WriterResultHandler(writers))
pipeline_class = type(
'TrimPipelineImpl', (mixin_class, TrimPipeline), {})
pipeline = pipeline_class(record_handler, result_handler)
self.summary.update(mode='serial', threads=1)
return run_interruptible(pipeline, self, raise_on_error=True)
else:
# Run multiprocessing version
self.summary.update(mode='parallel', threads=options.threads)
return self.run_parallel(record_handler, writers, mixin_class)
def __call__(self):
options = self.options
match_probability = RandomMatchProbability()
# Create Adapters
has_adapters1 = options.adapters or options.anywhere or options.front
has_adapters2 = options.adapters2 or options.anywhere2 or options.front2
adapters1 = adapters2 = []
if has_adapters1 or has_adapters2:
adapter_cache = super().load_known_adapters()
parser_args = dict(
colorspace=options.colorspace,
max_error_rate=options.error_rate,
min_overlap=options.overlap,
read_wildcards=options.match_read_wildcards,
adapter_wildcards=options.match_adapter_wildcards,
indels=options.indels,
indel_cost=options.indel_cost,
cache=adapter_cache,
gc_content=options.gc_content,
match_probability=match_probability,
alphabet=options.alphabet)
if options.adapter_max_rmp:
parser_args['max_rmp'] = options.adapter_max_rmp
adapter_parser = AdapterParser(**parser_args)
if has_adapters1:
adapters1 = adapter_parser.parse_multi(options.adapters,
options.anywhere,
options.front)
if has_adapters2:
adapters2 = adapter_parser.parse_multi(options.adapters2,
options.anywhere2,
options.front2)
if options.cache_adapters:
adapter_cache.save()
# Create Modifiers
# TODO: can this be replaced with an argparse required group?
if (not adapters1 and not adapters2 and not options.quality_cutoff
and options.nextseq_trim is None and options.cut == []
and options.cut2 == [] and options.cut_min == []
and options.cut_min2 == [] and
(options.minimum_length is None or options.minimum_length <= 0)
and options.maximum_length == sys.maxsize
and not options.trim_n and not self.has_qualfile
and options.max_n is None and
(not options.paired or options.overwrite_low_quality is None)):
raise ValueError(
"You need to provide at least one adapter sequence.")
if (options.aligner == 'insert'
and any(not a or len(a) != 1 or a[0].where != BACK
for a in (adapters1, adapters2))):
raise ValueError(
"Insert aligner requires a single 3' adapter for each read")
if options.debug:
for adapter in adapters1 + adapters2:
adapter.enable_debug()
if options.paired:
modifiers = PairedEndModifiers(options.paired)
else:
modifiers = SingleEndModifiers()
for oper in options.op_order:
if oper == 'W' and options.overwrite_low_quality:
lowq, highq, window = options.overwrite_low_quality
modifiers.add_modifier(OverwriteRead,
worse_read_min_quality=lowq,
better_read_min_quality=highq,
window_size=window,
base=options.quality_base)
elif oper == 'A' and (adapters1 or adapters2):
# TODO: generalize this using some kind of factory class
if options.aligner == 'insert':
# Use different base probabilities if we're trimming
# bisulfite data.
# TODO: this doesn't seem to help things, so commenting it
# out for now
#if options.bisulfite:
# base_probs = dict(match_prob=0.33, mismatch_prob=0.67)
# else:
# base_probs = dict(match_prob=0.25, mismatch_prob=0.75)
modifiers.add_modifier(
InsertAdapterCutter,
adapter1=adapters1[0], adapter2=adapters2[0],
action=options.action,
mismatch_action=options.correct_mismatches,
max_insert_mismatch_frac=\
options.insert_match_error_rate,
max_adapter_mismatch_frac=\
options.insert_match_adapter_error_rate,
match_probability=match_probability,
insert_max_rmp=options.insert_max_rmp,
read_wildcards=options.match_read_wildcards,
adapter_wildcards=options.match_adapter_wildcards)
else:
a1_args = dict(
adapters=adapters1,
times=options.times,
action=options.action) if adapters1 else None
a2_args = dict(
adapters=adapters2,
times=options.times,
action=options.action) if adapters2 else None
modifiers.add_modifier_pair(AdapterCutter, a1_args,
a2_args)
elif oper == 'C' and (options.cut or options.cut2):
modifiers.add_modifier_pair(UnconditionalCutter,
dict(lengths=options.cut),
dict(lengths=options.cut2))
elif oper == 'G' and (options.nextseq_trim is not None):
modifiers.add_modifier(NextseqQualityTrimmer,
cutoff=options.nextseq_trim,
base=options.quality_base)
elif oper == 'Q' and options.quality_cutoff:
modifiers.add_modifier(QualityTrimmer,
cutoff_front=options.quality_cutoff[0],
cutoff_back=options.quality_cutoff[1],
base=options.quality_base)
if options.bisulfite:
if isinstance(options.bisulfite, str):
if "non-directional" in options.bisulfite:
modifiers.add_modifier(
NonDirectionalBisulfiteTrimmer,
rrbs=options.bisulfite == "non-directional-rrbs")
elif options.bisulfite == "rrbs":
modifiers.add_modifier(RRBSTrimmer)
elif options.bisulfite in ("epignome", "truseq"):
# Trimming leads to worse results
#modifiers.add_modifier(TruSeqBisulfiteTrimmer)
pass
elif options.bisulfite == "swift":
modifiers.add_modifier(SwiftBisulfiteTrimmer)
else:
if options.bisulfite[0]:
modifiers.add_modifier(MinCutter,
read=1,
**(options.bisulfite[0]))
if len(options.bisulfite) > 1 and options.bisulfite[1]:
modifiers.add_modifier(MinCutter,
read=2,
**(options.bisulfite[1]))
if options.trim_n:
modifiers.add_modifier(NEndTrimmer)
if options.cut_min or options.cut_min2:
modifiers.add_modifier_pair(MinCutter,
dict(lengths=options.cut_min),
dict(lengths=options.cut_min2))
if options.length_tag:
modifiers.add_modifier(LengthTagModifier,
length_tag=options.length_tag)
if options.strip_suffix:
modifiers.add_modifier(SuffixRemover,
suffixes=options.strip_suffix)
if options.prefix or options.suffix:
modifiers.add_modifier(PrefixSuffixAdder,
prefix=options.prefix,
suffix=options.suffix)
if options.double_encode:
modifiers.add_modifier(DoubleEncoder)
if options.zero_cap and self.delivers_qualities:
modifiers.add_modifier(ZeroCapper,
quality_base=options.quality_base)
if options.trim_primer:
modifiers.add_modifier(PrimerTrimmer)
if options.merge_overlapping:
modifiers.add_modifier(MergeOverlapping,
min_overlap=options.merge_min_overlap,
error_rate=options.merge_error_rate,
mismatch_action=options.correct_mismatches)
# Create Filters and Formatters
min_affected = 2 if options.pair_filter == 'both' else 1
filters = Filters(FilterFactory(options.paired, min_affected))
output1 = output2 = None
interleaved = False
if options.interleaved_output:
output1 = options.interleaved_output
interleaved = True
else:
output1 = options.output
output2 = options.paired_output
seq_formatter_args = dict(qualities=self.delivers_qualities,
colorspace=options.colorspace,
interleaved=interleaved)
formatters = Formatters(output1, seq_formatter_args)
force_create = []
if options.merge_overlapping:
filters.add_filter(MergedReadFilter)
if options.merged_output:
formatters.add_seq_formatter(MergedReadFilter,
options.merged_output)
if options.minimum_length is not None and options.minimum_length > 0:
filters.add_filter(TooShortReadFilter, options.minimum_length)
if options.too_short_output:
formatters.add_seq_formatter(TooShortReadFilter,
options.too_short_output,
options.too_short_paired_output)
if options.maximum_length < sys.maxsize:
filters.add_filter(TooLongReadFilter, options.maximum_length)
if options.too_long_output is not None:
formatters.add_seq_formatter(TooLongReadFilter,
options.too_long_output,
options.too_long_paired_output)
if options.max_n is not None:
filters.add_filter(NContentFilter, options.max_n)
if options.discard_trimmed:
filters.add_filter(TrimmedFilter)
if not formatters.multiplexed:
if output1 is not None:
formatters.add_seq_formatter(NoFilter, output1, output2)
if output1 != STDOUT and options.writer_process:
force_create.append(output1)
if output2 is not None:
force_create.append(output2)
elif not (options.discard_trimmed and options.untrimmed_output):
formatters.add_seq_formatter(NoFilter, options.default_outfile)
if options.default_outfile != STDOUT and options.writer_process:
force_create.append(options.default_outfile)
if options.discard_untrimmed or options.untrimmed_output:
filters.add_filter(UntrimmedFilter)
if not options.discard_untrimmed:
if formatters.multiplexed:
untrimmed = options.untrimmed_output or output1.format(
name='unknown')
formatters.add_seq_formatter(UntrimmedFilter, untrimmed)
formatters.add_seq_formatter(NoFilter, untrimmed)
elif options.untrimmed_output:
formatters.add_seq_formatter(UntrimmedFilter,
options.untrimmed_output,
options.untrimmed_paired_output)
if options.rest_file:
formatters.add_info_formatter(RestFormatter(options.rest_file))
if options.info_file:
formatters.add_info_formatter(InfoFormatter(options.info_file))
if options.wildcard_file:
formatters.add_info_formatter(
WildcardFormatter(options.wildcard_file))
if options.paired:
mixin_class = PairedEndPipelineMixin
else:
mixin_class = SingleEndPipelineMixin
writers = Writers(force_create)
record_handler = RecordHandler(modifiers, filters, formatters)
if options.stats:
record_handler = StatsRecordHandlerWrapper(
record_handler,
options.paired,
options.stats,
qualities=self.delivers_qualities,
quality_base=self.quality_base)
logger = logging.getLogger()
num_adapters = sum(len(a) for a in modifiers.get_adapters())
logger.info(
"Trimming %s adapter%s with at most %.1f%% errors in %s mode ...",
num_adapters, 's' if num_adapters > 1 else '',
options.error_rate * 100, {
False: 'single-end',
'first': 'paired-end legacy',
'both': 'paired-end'
}[options.paired])
if (options.paired == 'first'
and (len(record_handler.modifiers.get_modifiers(read=2)) > 0
or options.quality_cutoff)):
logger.warning('\n'.join(
textwrap.wrap(
'Requested read modifications are applied only to the '
'first read since backwards compatibility mode is enabled. '
'To modify both reads, also use any of the -A/-B/-G/-U '
'options. Use a dummy adapter sequence when necessary: '
'-A XXX')))
if options.threads is None:
# Run single-threaded version
result_handler = WorkerResultHandler(WriterResultHandler(writers))
pipeline_class = type('TrimPipelineImpl',
(mixin_class, TrimPipeline), {})
pipeline = pipeline_class(record_handler, result_handler)
self.summary.update(mode='serial', threads=1)
return run_interruptible(pipeline, self, raise_on_error=True)
else:
# Run multiprocessing version
self.summary.update(mode='parallel', threads=options.threads)
return self.run_parallel(record_handler, writers, mixin_class)
def create_trim_params(options, parser, default_outfile):
from atropos.adapters import AdapterParser, BACK
from atropos.modifiers import (
Modifiers, AdapterCutter, InsertAdapterCutter, UnconditionalCutter,
NextseqQualityTrimmer, QualityTrimmer, NonDirectionalBisulfiteTrimmer,
RRBSTrimmer, SwiftBisulfiteTrimmer, MinCutter, NEndTrimmer,
LengthTagModifier, SuffixRemover, PrefixSuffixAdder, DoubleEncoder,
ZeroCapper, PrimerTrimmer, MergeOverlapping, OverwriteRead)
from atropos.filters import (
Filters, FilterFactory, TooShortReadFilter, TooLongReadFilter,
NContentFilter, TrimmedFilter, UntrimmedFilter, NoFilter,
MergedReadFilter)
from atropos.trim import Pipeline, PipelineWithStats
from atropos.seqio import Formatters, RestFormatter, InfoFormatter, WildcardFormatter, Writers
from atropos.util import RandomMatchProbability
reader, input_names, qualities, has_qual_file = create_reader(options, parser)
if options.adapter_max_rmp or options.aligner == 'insert':
match_probability = RandomMatchProbability()
# Create Adapters
has_adapters1 = options.adapters or options.anywhere or options.front
has_adapters2 = options.adapters2 or options.anywhere2 or options.front2
adapters1 = adapters2 = []
if has_adapters1 or has_adapters2:
adapter_cache = load_known_adapters(options)
parser_args = dict(
colorspace=options.colorspace,
max_error_rate=options.error_rate,
min_overlap=options.overlap,
read_wildcards=options.match_read_wildcards,
adapter_wildcards=options.match_adapter_wildcards,
indels=options.indels, indel_cost=options.indel_cost,
cache=adapter_cache
)
if options.adapter_max_rmp:
parser_args['match_probability'] = match_probability
parser_args['max_rmp'] = options.adapter_max_rmp
adapter_parser = AdapterParser(**parser_args)
try:
if has_adapters1:
adapters1 = adapter_parser.parse_multi(
options.adapters, options.anywhere, options.front)
if has_adapters2:
adapters2 = adapter_parser.parse_multi(
options.adapters2, options.anywhere2, options.front2)
except IOError as e:
if e.errno == errno.ENOENT:
parser.error(e)
raise
except ValueError as e:
parser.error(e)
if options.cache_adapters:
adapter_cache.save()
# Create Modifiers
# TODO: can this be replaced with an argparse required group?
if not adapters1 and not adapters2 and not options.quality_cutoff and \
options.nextseq_trim is None and \
options.cut == [] and options.cut2 == [] and \
options.cut_min == [] and options.cut_min2 == [] and \
(options.minimum_length is None or options.minimum_length <= 0) and \
options.maximum_length == sys.maxsize and \
not has_qual_file and options.max_n is None and not options.trim_n \
and (not options.paired or options.overwrite_low_quality is None):
parser.error("You need to provide at least one adapter sequence.")
if options.aligner == 'insert':
if not adapters1 or len(adapters1) != 1 or adapters1[0].where != BACK or \
not adapters2 or len(adapters2) != 1 or adapters2[0].where != BACK:
parser.error("Insert aligner requires a single 3' adapter for each read")
if options.debug:
for adapter in adapters1 + adapters2:
adapter.enable_debug()
modifiers = Modifiers(options.paired)
for op in options.op_order:
if op == 'W' and options.overwrite_low_quality:
lowq, highq, window = options.overwrite_low_quality
modifiers.add_modifier(OverwriteRead,
worse_read_min_quality=lowq, better_read_min_quality=highq,
window_size=window, base=options.quality_base)
elif op == 'A' and (adapters1 or adapters2):
# TODO: generalize this using some kind of factory class
if options.aligner == 'insert':
# Use different base probabilities if we're trimming bisulfite data.
# TODO: this doesn't seem to help things, so commenting it out for now
#base_probs = dict(p1=0.33, p2=0.67) if options.bisulfite else dict(p1=0.25, p2=0.75)
modifiers.add_modifier(InsertAdapterCutter,
adapter1=adapters1[0], adapter2=adapters2[0], action=options.action,
mismatch_action=options.correct_mismatches,
max_insert_mismatch_frac=options.insert_match_error_rate,
max_adapter_mismatch_frac=options.insert_match_adapter_error_rate,
match_probability=match_probability,
insert_max_rmp=options.insert_max_rmp)
else:
a1_args = a2_args = None
if adapters1:
a1_args = dict(adapters=adapters1, times=options.times, action=options.action)
if adapters2:
a2_args = dict(adapters=adapters2, times=options.times, action=options.action)
modifiers.add_modifier_pair(AdapterCutter, a1_args, a2_args)
elif op == 'C' and (options.cut or options.cut2):
modifiers.add_modifier_pair(UnconditionalCutter,
dict(lengths=options.cut),
dict(lengths=options.cut2)
)
elif op == 'G' and (options.nextseq_trim is not None):
modifiers.add_modifier(NextseqQualityTrimmer,
read=1, cutoff=options.nextseq_trim, base=options.quality_base)
elif op == 'Q' and options.quality_cutoff:
modifiers.add_modifier(QualityTrimmer,
cutoff_front=options.quality_cutoff[0],
cutoff_back=options.quality_cutoff[1],
base=options.quality_base)
if options.bisulfite:
if isinstance(options.bisulfite, str):
if "non-directional" in options.bisulfite:
modifiers.add_modifier(NonDirectionalBisulfiteTrimmer,
rrbs=options.bisulfite=="non-directional-rrbs")
elif options.bisulfite == "rrbs":
modifiers.add_modifier(RRBSTrimmer)
elif options.bisulfite in ("epignome", "truseq"):
# Trimming leads to worse results
#modifiers.add_modifier(TruSeqBisulfiteTrimmer)
pass
elif options.bisulfite == "swift":
modifiers.add_modifier(SwiftBisulfiteTrimmer)
else:
if options.bisulfite[0]:
modifiers.add_modifier(MinCutter, read=1, **(options.bisulfite[0]))
if len(options.bisulfite) > 1 and options.bisulfite[1]:
modifiers.add_modifier(MinCutter, read=2, **(options.bisulfite[1]))
if options.trim_n:
modifiers.add_modifier(NEndTrimmer)
if options.cut_min or options.cut_min2:
modifiers.add_modifier_pair(MinCutter,
dict(lengths=options.cut_min),
dict(lengths=options.cut_min2)
)
if options.length_tag:
modifiers.add_modifier(LengthTagModifier, length_tag=options.length_tag)
if options.strip_suffix:
modifiers.add_modifier(SuffixRemover, suffixes=options.strip_suffix)
if options.prefix or options.suffix:
modifiers.add_modifier(PrefixSuffixAdder, prefix=options.prefix, suffix=options.suffix)
if options.double_encode:
modifiers.add_modifier(DoubleEncoder)
if options.zero_cap and qualities:
modifiers.add_modifier(ZeroCapper, quality_base=options.quality_base)
if options.trim_primer:
modifiers.add_modifier(PrimerTrimmer)
if options.merge_overlapping:
modifiers.add_modifier(MergeOverlapping,
min_overlap=options.merge_min_overlap,
error_rate=options.merge_error_rate,
mismatch_action=options.correct_mismatches)
# Create Filters and Formatters
min_affected = 2 if options.pair_filter == 'both' else 1
filters = Filters(FilterFactory(options.paired, min_affected))
output1 = output2 = None
interleaved = False
if options.interleaved_output:
output1 = options.interleaved_output
interleaved = True
else:
output1 = options.output
output2 = options.paired_output
seq_formatter_args = dict(
qualities=qualities,
colorspace=options.colorspace,
interleaved=interleaved
)
formatters = Formatters(output1, seq_formatter_args)
force_create = []
if options.merge_overlapping:
filters.add_filter(MergedReadFilter)
if options.merged_output:
formatters.add_seq_formatter(MergedReadFilter, options.merged_output)
if options.minimum_length is not None and options.minimum_length > 0:
filters.add_filter(TooShortReadFilter, options.minimum_length)
if options.too_short_output:
formatters.add_seq_formatter(TooShortReadFilter,
options.too_short_output, options.too_short_paired_output)
if options.maximum_length < sys.maxsize:
filters.add_filter(TooLongReadFilter, options.maximum_length)
if options.too_long_output is not None:
formatters.add_seq_formatter(TooLongReadFilter,
options.too_long_output, options.too_long_paired_output)
if options.max_n is not None:
filters.add_filter(NContentFilter, options.max_n)
if options.discard_trimmed:
filters.add_filter(TrimmedFilter)
if not formatters.multiplexed:
if output1 is not None:
formatters.add_seq_formatter(NoFilter, output1, output2)
if output1 != STDOUT and options.writer_process:
force_create.append(output1)
if output2 is not None:
force_create.append(output2)
elif not (options.discard_trimmed and options.untrimmed_output):
formatters.add_seq_formatter(NoFilter, default_outfile)
if default_outfile != STDOUT and options.writer_process:
force_create.append(default_outfile)
if options.discard_untrimmed or options.untrimmed_output:
filters.add_filter(UntrimmedFilter)
if not options.discard_untrimmed:
if formatters.multiplexed:
untrimmed = options.untrimmed_output or output1.format(name='unknown')
formatters.add_seq_formatter(UntrimmedFilter, untrimmed)
formatters.add_seq_formatter(NoFilter, untrimmed)
elif options.untrimmed_output:
formatters.add_seq_formatter(UntrimmedFilter,
options.untrimmed_output, options.untrimmed_paired_output)
if options.rest_file:
formatters.add_info_formatter(RestFormatter(options.rest_file))
if options.info_file:
formatters.add_info_formatter(InfoFormatter(options.info_file))
if options.wildcard_file:
formatters.add_info_formatter(WildcardFormatter(options.wildcard_file))
writers = Writers(force_create)
if options.stats:
read_stats = ReadStatistics(
options.stats, options.paired, qualities=qualities,
tile_key_regexp=options.tile_key_regexp)
pipeline = PipelineWithStats(modifiers, filters, read_stats)
else:
pipeline = Pipeline(modifiers, filters)
return (reader, pipeline, formatters, writers)
from argparse import ArgumentParser
from atropos.modifiers import AdapterCutter, InsertAdapterCutter
from atropos.adapters import AdapterParser
from atropos.seqio import open_reader
adapter_parser = AdapterParser()
A1 = adapter_parser.parse('AGATCGGAAGAGCACACGTCTGAACTCCAGTCACACAGTGATCTCGTATGCCGTCTTCTGCTTG')
A2 = adapter_parser.parse('AGATCGGAAGAGCGTCGTGTAGGGAAAGAGTGTAGATCTCGGTGGTCGCCGTATCATT')
def create_adapter():
ac1 = AdapterCutter([A1])
ac2 = AdapterCutter([A2])
return lambda read1,read2: (ac1(read1), ac2(read2))
def create_insert():
return InsertAdapterCutter(A1, A2)
def time_process(reader, aligner):
from datetime import datetime
start = datetime.now()
i = run_process(reader, aligner)
stop = datetime.now()
t = stop-start
print("Time to process {} read pairs: {}".format(i, t))
return t.total_seconds()
def run_process(reader, aligner):
for i, (read1, read2) in enumerate(reader, 1):
read1_new, read2_new = aligner(read1, read2)
return i
def create_atropos_params(options, parser, default_outfile):
from atropos.adapters import AdapterParser, BACK
from atropos.modifiers import (
Modifiers, AdapterCutter, InsertAdapterCutter, UnconditionalCutter,
NextseqQualityTrimmer, QualityTrimmer, NonDirectionalBisulfiteTrimmer,
RRBSTrimmer, SwiftBisulfiteTrimmer, MinCutter, NEndTrimmer,
LengthTagModifier, SuffixRemover, PrefixSuffixAdder, DoubleEncoder,
ZeroCapper, PrimerTrimmer, MergeOverlapping, OverwriteRead)
from atropos.filters import (
Filters, FilterFactory, TooShortReadFilter, TooLongReadFilter,
NContentFilter, TrimmedFilter, UntrimmedFilter, NoFilter,
MergedReadFilter)
from atropos.seqio import Formatters, RestFormatter, InfoFormatter, WildcardFormatter, Writers
from atropos.util import RandomMatchProbability
reader, input_names, qualities, has_qual_file = create_reader(options, parser)
if options.adapter_max_rmp or options.aligner == 'insert':
match_probability = RandomMatchProbability()
# Create Adapters
has_adapters1 = options.adapters or options.anywhere or options.front
has_adapters2 = options.adapters2 or options.anywhere2 or options.front2
adapters1 = adapters2 = []
if has_adapters1 or has_adapters2:
adapter_cache = load_known_adapters(options)
parser_args = dict(
colorspace=options.colorspace,
max_error_rate=options.error_rate,
min_overlap=options.overlap,
read_wildcards=options.match_read_wildcards,
adapter_wildcards=options.match_adapter_wildcards,
indels=options.indels, indel_cost=options.indel_cost,
cache=adapter_cache
)
if options.adapter_max_rmp:
parser_args['match_probability'] = match_probability
parser_args['max_rmp'] = options.adapter_max_rmp
adapter_parser = AdapterParser(**parser_args)
try:
if has_adapters1:
adapters1 = adapter_parser.parse_multi(
options.adapters, options.anywhere, options.front)
if has_adapters2:
adapters2 = adapter_parser.parse_multi(
options.adapters2, options.anywhere2, options.front2)
except IOError as e:
if e.errno == errno.ENOENT:
parser.error(e)
raise
except ValueError as e:
parser.error(e)
if options.cache_adapters:
adapter_cache.save()
# Create Modifiers
# TODO: can this be replaced with an argparse required group?
if not adapters1 and not adapters2 and not options.quality_cutoff and \
options.nextseq_trim is None and \
options.cut == [] and options.cut2 == [] and \
options.cut_min == [] and options.cut_min2 == [] and \
(options.minimum_length is None or options.minimum_length <= 0) and \
options.maximum_length == sys.maxsize and \
not has_qual_file and options.max_n is None and not options.trim_n \
and (not options.paired or options.overwrite_low_quality is None):
parser.error("You need to provide at least one adapter sequence.")
if options.aligner == 'insert':
if not adapters1 or len(adapters1) != 1 or adapters1[0].where != BACK or \
not adapters2 or len(adapters2) != 1 or adapters2[0].where != BACK:
parser.error("Insert aligner requires a single 3' adapter for each read")
if options.debug:
for adapter in adapters1 + adapters2:
adapter.enable_debug()
modifiers = Modifiers(options.paired)
for op in options.op_order:
if op == 'W' and options.overwrite_low_quality:
lowq, highq, window = options.overwrite_low_quality
modifiers.add_modifier(OverwriteRead,
worse_read_min_quality=lowq, better_read_min_quality=highq,
window_size=window, base=options.quality_base)
elif op == 'A' and (adapters1 or adapters2):
# TODO: generalize this using some kind of factory class
if options.aligner == 'insert':
# Use different base probabilities if we're trimming bisulfite data.
# TODO: this doesn't seem to help things, so commenting it out for now
#base_probs = dict(p1=0.33, p2=0.67) if options.bisulfite else dict(p1=0.25, p2=0.75)
modifiers.add_modifier(InsertAdapterCutter,
adapter1=adapters1[0], adapter2=adapters2[0], action=options.action,
mismatch_action=options.correct_mismatches,
max_insert_mismatch_frac=options.insert_match_error_rate,
max_adapter_mismatch_frac=options.insert_match_adapter_error_rate,
match_probability=match_probability,
insert_max_rmp=options.insert_max_rmp)
else:
a1_args = a2_args = None
if adapters1:
a1_args = dict(adapters=adapters1, times=options.times, action=options.action)
if adapters2:
a2_args = dict(adapters=adapters2, times=options.times, action=options.action)
modifiers.add_modifier_pair(AdapterCutter, a1_args, a2_args)
elif op == 'C' and (options.cut or options.cut2):
modifiers.add_modifier_pair(UnconditionalCutter,
dict(lengths=options.cut),
dict(lengths=options.cut2)
)
elif op == 'G' and (options.nextseq_trim is not None):
modifiers.add_modifier(NextseqQualityTrimmer,
read=1, cutoff=options.nextseq_trim, base=options.quality_base)
elif op == 'Q' and options.quality_cutoff:
modifiers.add_modifier(QualityTrimmer,
cutoff_front=options.quality_cutoff[0],
cutoff_back=options.quality_cutoff[1],
base=options.quality_base)
if options.bisulfite:
if isinstance(options.bisulfite, str):
if "non-directional" in options.bisulfite:
modifiers.add_modifier(NonDirectionalBisulfiteTrimmer,
rrbs=options.bisulfite=="non-directional-rrbs")
elif options.bisulfite == "rrbs":
modifiers.add_modifier(RRBSTrimmer)
elif options.bisulfite in ("epignome", "truseq"):
# Trimming leads to worse results
#modifiers.add_modifier(TruSeqBisulfiteTrimmer)
pass
elif options.bisulfite == "swift":
modifiers.add_modifier(SwiftBisulfiteTrimmer)
else:
if options.bisulfite[0]:
modifiers.add_modifier(MinCutter, read=1, **(options.bisulfite[0]))
if len(options.bisulfite) > 1 and options.bisulfite[1]:
modifiers.add_modifier(MinCutter, read=2, **(options.bisulfite[1]))
if options.trim_n:
modifiers.add_modifier(NEndTrimmer)
if options.cut_min or options.cut_min2:
modifiers.add_modifier_pair(MinCutter,
dict(lengths=options.cut_min),
dict(lengths=options.cut_min2)
)
if options.length_tag:
modifiers.add_modifier(LengthTagModifier, length_tag=options.length_tag)
if options.strip_suffix:
modifiers.add_modifier(SuffixRemover, suffixes=options.strip_suffix)
if options.prefix or options.suffix:
modifiers.add_modifier(PrefixSuffixAdder, prefix=options.prefix, suffix=options.suffix)
if options.double_encode:
modifiers.add_modifier(DoubleEncoder)
if options.zero_cap and qualities:
modifiers.add_modifier(ZeroCapper, quality_base=options.quality_base)
if options.trim_primer:
modifiers.add_modifier(PrimerTrimmer)
if options.merge_overlapping:
modifiers.add_modifier(MergeOverlapping,
min_overlap=options.merge_min_overlap,
error_rate=options.merge_error_rate,
mismatch_action=options.correct_mismatches)
# Create Filters and Formatters
min_affected = 2 if options.pair_filter == 'both' else 1
filters = Filters(FilterFactory(options.paired, min_affected))
output1 = output2 = None
interleaved = False
if options.interleaved_output:
output1 = options.interleaved_output
interleaved = True
else:
output1 = options.output
output2 = options.paired_output
seq_formatter_args = dict(
qualities=qualities,
colorspace=options.colorspace,
interleaved=interleaved
)
formatters = Formatters(output1, seq_formatter_args)
force_create = []
if options.merge_overlapping:
filters.add_filter(MergedReadFilter)
if options.merged_output:
formatters.add_seq_formatter(MergedReadFilter, options.merged_output)
if options.minimum_length is not None and options.minimum_length > 0:
filters.add_filter(TooShortReadFilter, options.minimum_length)
if options.too_short_output:
formatters.add_seq_formatter(TooShortReadFilter,
options.too_short_output, options.too_short_paired_output)
if options.maximum_length < sys.maxsize:
filters.add_filter(TooLongReadFilter, options.maximum_length)
if options.too_long_output is not None:
formatters.add_seq_formatter(TooLongReadFilter,
options.too_long_output, options.too_long_paired_output)
if options.max_n is not None:
filters.add_filter(NContentFilter, options.max_n)
if options.discard_trimmed:
filters.add_filter(TrimmedFilter)
if not formatters.multiplexed:
if output1 is not None:
formatters.add_seq_formatter(NoFilter, output1, output2)
if output1 != STDOUT and options.writer_process:
force_create.append(output1)
if output2 is not None:
force_create.append(output2)
elif not (options.discard_trimmed and options.untrimmed_output):
formatters.add_seq_formatter(NoFilter, default_outfile)
if default_outfile != STDOUT and options.writer_process:
force_create.append(default_outfile)
if options.discard_untrimmed or options.untrimmed_output:
filters.add_filter(UntrimmedFilter)
if not options.discard_untrimmed:
if formatters.multiplexed:
untrimmed = options.untrimmed_output or output1.format(name='unknown')
formatters.add_seq_formatter(UntrimmedFilter, untrimmed)
formatters.add_seq_formatter(NoFilter, untrimmed)
elif options.untrimmed_output:
formatters.add_seq_formatter(UntrimmedFilter,
options.untrimmed_output, options.untrimmed_paired_output)
if options.rest_file:
formatters.add_info_formatter(RestFormatter(options.rest_file))
if options.info_file:
formatters.add_info_formatter(InfoFormatter(options.info_file))
if options.wildcard_file:
formatters.add_info_formatter(WildcardFormatter(options.wildcard_file))
writers = Writers(force_create)
return AtroposParams(reader, modifiers, filters, formatters, writers)
from argparse import ArgumentParser
from atropos.modifiers import AdapterCutter, InsertAdapterCutter
from atropos.adapters import AdapterParser
from atropos.seqio import open_reader
adapter_parser = AdapterParser()
A1 = adapter_parser.parse(
'AGATCGGAAGAGCACACGTCTGAACTCCAGTCACACAGTGATCTCGTATGCCGTCTTCTGCTTG')
A2 = adapter_parser.parse(
'AGATCGGAAGAGCGTCGTGTAGGGAAAGAGTGTAGATCTCGGTGGTCGCCGTATCATT')
def create_adapter():
ac1 = AdapterCutter([A1])
ac2 = AdapterCutter([A2])
return lambda read1, read2: (ac1(read1), ac2(read2))
def create_insert():
return InsertAdapterCutter(A1, A2)
def time_process(reader, aligner):
from datetime import datetime
start = datetime.now()
i = run_process(reader, aligner)
stop = datetime.now()
t = stop - start
print("Time to process {} read pairs: {}".format(i, t))
return t.total_seconds()
