def test_log_file_has_sub_process_entries(self):
""" This test documents the alternative: slurp the log results back in
from the log file and then do the text matches.
"""
assert applog.delete_log_file_if_exists() == True
main_logger = applog.MainLogger()
log_queue = main_logger.log_queue
sub_proc = multiprocessing.Process(target=self.worker_process,
args=(log_queue,))
sub_proc.start()
time.sleep(1.0) # make sure the process has enough time to emit
main_logger.close()
time.sleep(0.5) # required to let file creation happen
log_text = applog.get_text_from_log()
assert "Top level log configuration" in log_text
assert "Sub process setup configuration" in log_text
assert "Sub process debug log info" in log_text
applog.explicit_log_close()
def test_subprocess_device_logging_in_file(self, caplog):
""" Define the application wide queue handler for the logging, assign it
to the device process. This test is about demonstrating actual usage in
order to process the results in py.test.
One of the confusing aspects here may be that in a bare bones
application example, the log prints to the console still appear, on
windows and linux. pytest does not see them however. Slurp them back in
from the log file, which seems to work in executable, bare bones
application, and pytest mode.
"""
assert applog.delete_log_file_if_exists() == True
main_logger = applog.MainLogger()
device = devices.LongPollingSimulateSpectra(main_logger.log_queue)
""" NOTE: these sleeps are critical on windows. They do not seem to
matter on linux though. They have to be in the order listed below or the
pytest run will hang on cleanup. That is, all the tests will be run,
assertions processed, and it just hangs at the end of the run.
"""
time.sleep(1.0) # make sure the process has enough time to emit
device.close()
main_logger.close()
time.sleep(1.0) # required to let file creation happen
log_text = applog.get_text_from_log()
assert "SimulateSpectra setup" in log_text
assert "SimulateSpectra setup" not in caplog.text()
applog.explicit_log_close()
def test_log_file_has_sub_process_entries(self):
""" This test documents the alternative: slurp the log results back in
from the log file and then do the text matches.
"""
assert applog.delete_log_file_if_exists() == True
main_logger = applog.MainLogger()
log_queue = main_logger.log_queue
sub_proc = multiprocessing.Process(target=self.worker_process,
args=(log_queue, ))
sub_proc.start()
time.sleep(1.0) # make sure the process has enough time to emit
main_logger.close()
time.sleep(0.5) # required to let file creation happen
log_text = applog.get_text_from_log()
assert "Top level log configuration" in log_text
assert "Sub process setup configuration" in log_text
assert "Sub process debug log info" in log_text
applog.explicit_log_close()
def test_log_capture_fixture_does_not_see_sub_process_entries(
self, caplog):
""" This test is about documenting the expected behavior. It took days
of effort to determine that the logging is behaving as expected, but the
pytest capture fixtures does not seem to be able to record those values.
"""
main_logger = applog.MainLogger()
log_queue = main_logger.log_queue
sub_proc = multiprocessing.Process(target=self.worker_process,
args=(log_queue, ))
sub_proc.start()
time.sleep(1.0) # make sure the process has enough time to emit
main_logger.close()
time.sleep(0.5) # required to let file creation happen
log_text = caplog.text()
assert "Top level log configuration" in log_text
assert "Sub process setup configuration" not in log_text
assert "Sub process debug log info" not in log_text
applog.explicit_log_close()
def test_subprocess_data_collect_is_logged_in_file(self, caplog):
assert applog.delete_log_file_if_exists() == True
main_logger = applog.MainLogger()
device = devices.LongPollingSimulateSpectra(main_logger.log_queue)
result = device.read()
while result is None:
time.sleep(0.2)
print "Read: %s" % result
result = device.read()
assert len(result) == 1024
device.close()
time.sleep(1.0) # make sure the process has enough time to emit
main_logger.close()
time.sleep(1.0) # required to let file creation happen
log_text = applog.get_text_from_log()
assert "Collected data in continuous" in log_text
assert "Collected data in continuous" not in caplog.text()
applog.explicit_log_close()
def test_log_file_is_created(self):
assert applog.delete_log_file_if_exists() == True
main_logger = applog.MainLogger()
main_logger.close()
time.sleep(0.5) # required to let file creation happen
assert applog.log_file_created() == True
applog.explicit_log_close()
def test_subprocess_device_logging_is_unavailable(self, caplog):
""" Shows the expected interactions between py.test, the caplog fixture,
and logging from subprocesses. Specifically that pytest does not see the
log statements printed from subprocess, you have to read them back from
the file.
"""
device = devices.LongPollingSimulateSpectra()
device.close()
assert "SimulateSpectra setup" not in caplog.text()
applog.explicit_log_close()
def test_log_file_is_created(self):
assert applog.delete_log_file_if_exists() == True
main_logger = applog.MainLogger()
main_logger.close()
time.sleep(0.5) # required to let file creation happen
assert applog.log_file_created() == True
applog.explicit_log_close()
def test_log_file_has_entries(self):
assert applog.delete_log_file_if_exists() == True
main_logger = applog.MainLogger()
main_logger.close()
time.sleep(0.5) # required to let file creation happen
log_text = applog.get_text_from_log()
assert "Top level log configuration" in log_text
applog.explicit_log_close()
def test_log_file_has_entries(self):
assert applog.delete_log_file_if_exists() == True
main_logger = applog.MainLogger()
main_logger.close()
time.sleep(0.5) # required to let file creation happen
log_text = applog.get_text_from_log()
assert "Top level log configuration" in log_text
applog.explicit_log_close()
def test_view_logs_visible_to_caplog(self, caplog, qtbot):
main_logger = applog.MainLogger()
app_control = control.Controller(main_logger.log_queue)
qtbot.wait(1000)
app_control.close()
time.sleep(1)
main_logger.close()
time.sleep(1)
assert "Init of BasicWindow" in caplog.text()
applog.explicit_log_close()
def test_view_logs_visible_to_caplog(self, caplog, qtbot):
main_logger = applog.MainLogger()
app_control = control.Controller(main_logger.log_queue)
qtbot.wait(1000)
app_control.close()
time.sleep(1)
main_logger.close()
time.sleep(1)
assert "Init of BasicWindow" in caplog.text()
applog.explicit_log_close()
def test_close_view_emits_control_signal(self, caplog, qtbot):
""" Control script emits an event on a close condition to be processsed
by the parent qt application, in this case qtbot. In the scripts file,
it's the Qapplication.
"""
main_logger = applog.MainLogger()
app_control = control.Controller(main_logger.log_queue)
QtTest.QTest.qWaitForWindowShown(app_control.form)
signal = app_control.control_exit_signal.exit
with qtbot.wait_signal(signal, timeout=1):
app_control.form.close()
main_logger.close()
time.sleep(1)
assert "Control level close" in caplog.text()
applog.explicit_log_close()
def test_close_view_emits_control_signal(self, caplog, qtbot):
""" Control script emits an event on a close condition to be processsed
by the parent qt application, in this case qtbot. In the scripts file,
it's the Qapplication.
"""
main_logger = applog.MainLogger()
app_control = control.Controller(main_logger.log_queue)
QtTest.QTest.qWaitForWindowShown(app_control.form)
signal = app_control.control_exit_signal.exit
with qtbot.wait_signal(signal, timeout=1):
app_control.form.close()
main_logger.close()
time.sleep(1)
assert "Control level close" in caplog.text()
applog.explicit_log_close()
def test_log_capture_fixture_does_not_see_sub_process_entries(self, caplog):
""" This test is about documenting the expected behavior. It took days
of effort to determine that the logging is behaving as expected, but the
pytest capture fixtures does not seem to be able to record those values.
"""
main_logger = applog.MainLogger()
log_queue = main_logger.log_queue
sub_proc = multiprocessing.Process(target=self.worker_process,
args=(log_queue,))
sub_proc.start()
time.sleep(1.0) # make sure the process has enough time to emit
main_logger.close()
time.sleep(0.5) # required to let file creation happen
log_text = caplog.text()
assert "Top level log configuration" in log_text
assert "Sub process setup configuration" not in log_text
assert "Sub process debug log info" not in log_text
applog.explicit_log_close()
def test_log_capture_fixture_can_read_top_level_log(self, caplog):
main_logger = applog.MainLogger()
main_logger.close()
assert "Top level log configuration" in caplog.text()
applog.explicit_log_close()
def control_close():
app_control.close()
main_logger.close()
applog.explicit_log_close()
def test_log_capture_fixture_can_read_top_level_log(self, caplog):
main_logger = applog.MainLogger()
main_logger.close()
assert "Top level log configuration" in caplog.text()
applog.explicit_log_close()
def test_direct_device_is_available(self, caplog):
device = devices.SimulateSpectra()
result = device.read()
assert len(result) == 1024
applog.explicit_log_close()
def test_direct_logging_is_available(self, caplog):
device = devices.SimulateSpectra()
assert "SimulateSpectra setup" in caplog.text()
applog.explicit_log_close()
def control_close():
app_control.close()
main_logger.close()
applog.explicit_log_close()