def component_search(self):
"""构建搜索"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.操作[0], screen_point.操作[1])
m1.click(self.BECivilWin, '', screen_point.构件搜索[0], screen_point.构件搜索[1])
w1 = WinControl('构件搜索')
sleep(2)
if w1.exists():
w1.wait(2)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', 'TWQ2')
w1.controlClick('[CLASS:Button; INSTANCE:5]')
sleep(2)
w1.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(2)
w2 = WinControl('搜索结果')
if w2.exists():
w2.wait(3)
w2.controlClick('[CLASS:Button; INSTANCE:3]')
else:
raise Exception("未打开搜索结果窗口")
else:
raise Exception("未打开构件搜索窗口")
sleep(2)
m1.click(self.BECivilWin, '', screen_point.构件搜索[0], screen_point.构件搜索[1])
else:
raise Exception("未识别BECivil窗口")
def open_project(self, projectname):
"""打开工程"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0], screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.打开工程[0], screen_point.打开工程[1])
sleep(3)
w1 = WinControl("选择工程")
if w1.exists():
w1.wait(3)
w1.setState(3)
# 输入名字搜索
m1.click("选择工程", '', 50, 35)
autoit.send(projectname)
sleep(5)
# 打开测试脚本用土建工程
m1.click(self.BECivilWin, '', 92, 133, clicks=3)
else:
raise Exception("未选中选择工程窗口")
sleep(10)
# 使视图视角变为俯视视角
m1.click(self.BECivilWin, '', 440, 440, button='right')
m1.click(self.BECivilWin, '', 490, 475)
else:
raise Exception("未识别BECivil窗口")
def monitoring_panel(self):
"""监控面板"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0], screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.监控面板[0], screen_point.监控面板[1])
sleep(1)
# 启用沙盘模式
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (830, 438, 1090, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未打开开启沙盘模式窗口')
sleep(13)
# 点击添加监控
m1.click(self.BECivilWin, '', 1800, 320)
sleep(7)
w1 = WinControl('添加监控')
if w1.exists():
w1.wait(3)
w1.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未弹出添加监控窗口")
sleep(4)
m1.click(self.BECivilWin, '', screen_point.沙盘模式[0], screen_point.沙盘模式[1])
else:
raise Exception("未识别BECivil窗口")
def add_monitor(self):
""" """
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0], screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.沙盘模式[0], screen_point.沙盘模式[1])
sleep(2)
# 使视图视角变为俯视视角
m1.click(self.BECivilWin, '', 440, 440, button='right')
m1.click(self.BECivilWin, '', 490, 475)
sleep(2)
m1.click(self.BECivilWin, '', screen_point.插入监控[0], screen_point.插入监控[1])
w1 = WinControl('插入监控')
sleep(2)
if w1.exists():
w1.wait(3)
# 关联监控
w1.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(8)
w2 = WinControl('关联监控')
if w2.exists():
w2.wait(3)
m1.click('关联监控', '', 623, 375)
sleep(2)
w2.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未打开关联监控窗口")
sleep(1)
# 详细位置
w1.controlClick("[CLASS:Button; INSTANCE:4]")
sleep(1)
m1.click(self.BECivilWin, '', 1050, 520)
sleep(1)
m1.click(self.BECivilWin, '', 1050, 520, button='right')
sleep(2)
m1.click(self.BECivilWin, '', 1100, 535)
sleep(1)
if w1.exists():
w1.wait(3)
w1.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未打开插入监控窗口")
else:
raise Exception("未打开插入监控窗口")
sleep(2)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (862, 438, 1058, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未显示插入监控成功窗口")
else:
raise Exception("未识别BECivil窗口")
def manage_working_set(self):
"""管理工作集"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0],
screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.管理工作集[0],
screen_point.管理工作集[1])
sleep(2)
w1 = WinControl('管理工作集')
if w1.exists():
w1.wait(3)
#w1.setState(3)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', '测试脚本用创建工作集')
sleep(3)
# 选中要删除的工作集
m1.click('管理工作集', '', 880, 390)
sleep(2)
# 点击删除
m1.click('管理工作集', '', 870, 760)
sleep(2)
if w0.exists():
sleep(2)
t1 = w0.getPos()
if t1 == (844, 438, 1076, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(3)
if w0.exists():
t2 = w0.getPos()
if t2 == (880, 438, 1040, 602):
pass
else:
raise Exception('Something went wrong.')
sleep(2)
if w0.exists():
t3 = w0.getPos()
if t3 == (880, 438, 1040, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未弹出删除确认框')
else:
raise Exception('未弹出删除成功选择框')
else:
raise Exception('未弹出删除工作集选择框')
sleep(2)
# 关闭管理工作集窗口
m1.click('管理工作集', '', 1114, 263)
else:
raise Exception("未弹出管理工作集窗口")
else:
raise Exception("未识别BECivil窗口")
def add_node(self):
"""添加钢筋节点"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
sleep(2)
# 使视图视角变为俯视视角
m1.click(self.BECivilWin, '', 440, 440, button='right')
m1.click(self.BECivilWin, '', 490, 475)
m1.click(self.BECivilWin, '', screen_point.操作[0], screen_point.操作[1])
m1.click(self.BECivilWin, '', screen_point.插入节点[0], screen_point.插入节点[1])
w1 = WinControl('插入节点')
sleep(1)
if w1.exists():
w1.wait(3)
# 上传文件
m1.click('插入节点', '', 970, 360)
sleep(1)
w2 = WinControl('打开')
if w2.exists():
w2.wait(3)
m1.click('打开', '', 1000, 50)
w2.controlSetText('[CLASS:Edit; INSTANCE:2]', self.uploadaddress)
autoit.send("{ENTER}")
sleep(1)
w2.controlSetText('[CLASS:Edit; INSTANCE:1]', '钢筋节点 (2).lbg')
w2.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未打开上传节点文件窗口')
sleep(2)
# 详细位置
m1.click('插入节点', '', 970, 450)
sleep(1)
# 选择要插入节点的位置
m1.click(self.BECivilWin, '', 1050, 504)
m1.click(self.BECivilWin, '', 1050, 504, button='right')
sleep(1)
m1.click(self.BECivilWin, '', 1100, 514)
sleep(2)
w1.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(5)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (862, 438, 1058, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('节点插入未成功')
else:
raise Exception('未打开插入节点窗口')
else:
raise Exception('未识别BECivil窗口')
def setting(self):
"""设置"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.任务[0], screen_point.任务[1])
m1.click(self.BECivilWin, '', screen_point.设置[0], screen_point.设置[1])
'''
m1.click(self.BECivilWin, '', screen_point.设置[0], 140)# 仪器信息
sleep(1)
w1 = WinControl('仪器信息')
if w1.exists():
w1.wait(3)
w1.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(1)
m1.click('仪器信息', '', 910, 650)
autoit.send('测试脚本用添加仪器')
m1.click('仪器信息', '', 1080, 650)
autoit.send('134652')
autoit.send("{ENTER}")
m1.click('仪器信息', '', 1180, 370)# 关闭仪器信息
else:
raise Exception('未打开仪器信息窗口')
sleep(1)
m1.click(self.BECivilWin, '', screen_point.设置[0], screen_point.设置[1])
'''
# 点位图管理
m1.click(self.BECivilWin, '', screen_point.设置[0], 160)
sleep(2)
w2 = WinControl('点位图管理')
if w2.exists():
w2.wait(3)
w2.controlClick("[CLASS:Button; INSTANCE:1]")
sleep(1)
# 截图点位图
m1.click(self.BECivilWin, '', 710, 390, button='right')
m1.click(self.BECivilWin, '', 660, 405)
sleep(2)
w3 = WinControl('点位图命名')
if w3.exists():
w3.wait(3)
w3.controlSetText('[CLASS:Edit; INSTANCE:1]', '测试脚本用点位图')
sleep(1)
w3.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未打开点位图命名窗口')
sleep(1)
# 关闭点位图管理
m1.click('点位图管理', '', 1336, 183)
else:
raise Exception('未打开点位图管理窗口')
else:
raise Exception('未识别市政窗口')
def monitor_management(self):
"""监控管理"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0], screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.监控管理[0], screen_point.监控管理[1])
sleep(1)
w1 = WinControl("监控管理")
if w1.exists():
w1.wait(3)
# 监控查看
m1.click('监控管理', '', 1140, 300)
sleep(7)
w2 = WinControl("监控查看")
if w2.exists():
w2.wait(3)
w2.controlClick("[CLASS:Button; INSTANCE:3]")
sleep(2)
w2.controlClick("[CLASS:Button; INSTANCE:4]")
else:
raise Exception("未打开监控查看窗口")
sleep(2)
# 编辑监控
m1.click('监控管理', '', 1180, 300)
sleep(2)
w3 = WinControl("编辑监控")
if w3.exists():
w3.wait(3)
w3.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未打开编辑监控窗口")
sleep(2)
# 删除
m1.click('监控管理', '', 1260, 300)
sleep(1)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (845, 438, 1075, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未识别确认删除窗口")
# 关闭监控管理窗口
m1.click('监控管理', '', 1360, 210)
else:
raise Exception('未识别监控管理窗口')
else:
raise Exception("未识别BECivil窗口")
def upload_project(self, projectname):
"""上传工程"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0], screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.上传工程[0], screen_point.上传工程[1])
w1 = WinControl("打开")
sleep(4)
if w1.exists():
w1.wait(3)
w1.setState(3)
# 输入保存上传工程的地址
m1.click('打开', '', 820, 45)
w1.controlSetText('[CLASS:Edit; INSTANCE:2]', self.uploadaddress)
autoit.send("{ENTER}")
sleep(2)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', projectname)
w1.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(2)
w2 = WinControl("上传工程")
sleep(2)
if w2.exists():
w2.wait(3)
w2.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(3)
w3 = WinControl("上传位置")
if w3.exists():
w3.wait(3)
# 选择IM测试
m1.click(self.BECivilWin, '', 940, 435)
sleep(1)
w3.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception('未选中上传位置窗口')
sleep(1)
w2.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未选中上传工程窗口')
else:
raise Exception('未选中打开窗口')
sleep(22)
w5 = WinControl("Luban Explorer（Civil）提醒您")
w5.wait(60)
if w5.exists():
pass
else:
raise Exception("上传成功提示未显示")
else:
raise Exception("未识别BECivil窗口")
def clear_cache(self):
"""清理缓存"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0],
screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.清除[0],
screen_point.清除[1])
sleep(2)
if w0.exists():
w0.wait(3)
t1 = w0.getPos()
if t1 == (832, 437, 1088, 603):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(3)
if w0.exists():
w0.wait(3)
t2 = w0.getPos()
if t2 == (845, 438, 1075, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:2]')
else:
raise Exception("没有弹出退出确认窗口")
else:
raise Exception("没有弹出清理缓存窗口")
else:
raise Exception("未识别BECivil窗口")
def format_painter(self):
"""格式刷"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.格式刷[0],
screen_point.格式刷[1])
sleep(2)
# 勾选“未定义状态”构件
w0.controlClick("[CLASS:Button; INSTANCE:14]")
sleep(2)
# 选择需要使用格式刷的构件
m1.click(self.BECivilWin, '', 1060, 505)
sleep(1)
m1.click(self.BECivilWin, '', 980, 640)
sleep(1)
m1.click(self.BECivilWin, '', 980, 640, button='right')
sleep(2)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (832, 437, 1088, 603):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception("未弹出刷新状态确认框")
else:
raise Exception("未识别BECivil窗口")
def quit_BECivil(self):
"""退出BECivil"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
m1 = MouseControl()
w0.wait(3)
m1.click(self.BECivilWin, '', 1900, 13)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (845, 438, 1075, 602):
pass
else:
raise Exception('Something went wrong.')
sleep(1)
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未弹出确认关闭软件窗口')
else:
raise Exception('未识别BECivil打开的窗口')
sleep(5)
if w0.exists():
raise Exception('关闭软件未成功')
else:
pass
def creat_working_set(self):
"""创建工作集"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0],
screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.创建工作集[0],
screen_point.创建工作集[1])
w1 = WinControl('创建工作集')
sleep(2)
if w1.exists():
w1.wait(3)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', '测试脚本用创建工作集')
w1.controlClick('[CLASS:Button; INSTANCE:1]')
w2 = WinControl('选择所属项目部')
sleep(2)
if w2.exists():
# 选择IM测试
m1.click('选择所属项目部', '', 850, 385)
w2.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception("未选中选择所属项目部窗口")
sleep(2)
# 选中需要创建工作集的两个工程
m1.click('创建工作集', '', 780, 390)
m1.click('创建工作集', '', 780, 420)
w1.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(2)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (826, 438, 1094, 602):
pass
else:
raise Exception('未弹出打开工作集选择框')
sleep(1)
w0.controlClick('[CLASS:Button; INSTANCE:2]')
else:
raise Exception('未弹出打开工作集选择框')
else:
raise Exception("未选中创建工作集窗口")
else:
raise Exception("未识别BECivil窗口")
def state_statistics(self):
"""状态统计"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.状态统计[0],
screen_point.状态统计[1])
sleep(2)
w0.controlClick("[CLASS:Button; INSTANCE:24]")
sleep(2)
w0.controlClick("[CLASS:Button; INSTANCE:25]")
sleep(3)
w1 = WinControl("另存为")
if w1.exists():
w1.wait(3)
w1.setState(3)
m1.click('另存为', '', 1060, 50)
autoit.send(self.downloadaddress)
autoit.send("{ENTER}")
sleep(2)
w1.controlClick("[CLASS:Button; INSTANCE:1]")
sleep(1)
w2 = WinControl("确认另存为")
if w2.exists():
w2.wait(3)
w2.controlClick("[CLASS:Button; INSTANCE:1]")
else:
pass
sleep(35)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (832, 438, 1088, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:2]")
else:
raise Exception("未能打开另存为窗口")
else:
raise Exception("未识别BECivil窗口")
def download_porject(self):
"""下载工程"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0], screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.下载工程[0], screen_point.下载工程[1])
sleep(2)
w1 = WinControl('浏览文件夹')
if w1.exists():
w1.wait(3)
# 选择下载的目标地址
w1.controlTreeView('[CLASS:SysTreeView32; INSTANCE:1]', 'Select', extra='桌面')
choose_direction(6)
choose_direction(3)
choose_direction(1)
choose_direction(2)
sleep(2)
w1.controlClick('Button1')
if w0.exists():
w0.wait(3)
t = w0.getPos()
# 目标文件夹没有下载过该工程
if t == (0, 0, 1920, 1040):
pass
# 目标文件夹曾经下载过该工程
elif t == (832, 438, 1088, 602):
pass
else:
raise Exception('Something went wrong.')
sleep(2)
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
pass
sleep(1)
w2 = WinControl('下载管理器')
if w2.exists():
pass
else:
raise Exception('未弹出下载管理器窗口')
else:
raise Exception("未选中浏览文件夹窗口")
else:
raise Exception("未识别BECivil窗口")
def service_setting(self):
""" 、服务设置"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0], screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.服务设置[0], screen_point.服务设置[1])
sleep(1)
w1 = WinControl("第三方监控服务设置")
if w1.exists():
w1.wait(3)
# 检测
w1.controlClick("[CLASS:Button; INSTANCE:1]")
sleep(7)
if w0.exists():
w0.wait(3)
t1 = w0.getPos()
if t1 == (880, 438, 1040, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未弹出检测成功窗口")
sleep(2)
# 确定
w1.controlClick("[CLASS:Button; INSTANCE:2]")
sleep(7)
if w0.exists():
w0.wait(3)
t2 = w0.getPos()
if t2 == (868, 438, 1052, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未弹出保存设置成功窗口")
else:
raise Exception("未弹出第三方监控服务设置")
else:
raise Exception("未识别BECivil窗口")
def project_time(self):
"""工程时间"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.工程时间[0],
screen_point.工程时间[1])
sleep(2)
w1 = WinControl("工程时间")
if w1.exists():
w1.wait(3)
w1.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未打开工程时间窗口")
else:
raise Exception("未识别BECivil窗口")
def start_IM(self):
"""启动IM"""
if WinControl(self.BECivilWin).exists():
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.资料[0],
screen_point.资料[1])
sleep(1)
m1.click(self.BECivilWin, '', screen_point.质检计量[0],
screen_point.质检计量[1])
# 等待IM界面
w1 = WinControl(self.IMWin)
w1.wait(30)
# 关闭筑业升级进程
if autoit.process_exists("ZY.Downloader.exe"):
autoit.process_close("ZY.Downloader.exe")
else:
pass
w1.setState(3)
else:
print('BECivil未启动，无法启动IM。')
def open_working_set(self):
"""打开工作集"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0],
screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.打开工作集[0],
screen_point.打开工作集[1])
sleep(3)
w1 = WinControl('打开工作集')
if w1.exists():
w1.setState(3)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', '测试脚本用创建工作集')
sleep(3)
# 打开工作集，因为有时候双击会出现打不开的情况，故设置点击数为3
m1.click('打开工作集', '', 92, 134, clicks=3)
else:
raise Exception("未选中打开工作集窗口")
else:
raise Exception("未识别BECivil窗口")
def sand_table_cockpit(self):
"""沙盘驾驶舱"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.沙盘模式[0],
screen_point.沙盘模式[1])
m1.click(self.BECivilWin, '', screen_point.沙盘驾驶舱[0],
screen_point.沙盘驾驶舱[1])
sleep(3)
w1 = WinControl(" 沙盘驾驶舱")
if w1.exists():
w1.wait(3)
# 播放
m1.click(' 沙盘驾驶舱', '', 190, 970)
sleep(3)
# 刷新
m1.click(' 沙盘驾驶舱', '', 450, 40)
sleep(3)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (838, 438, 1082, 602):
pass
else:
raise Exception('Something went wrong.')
sleep(1)
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未弹出刷新完成窗口")
# 关闭沙盘驾驶舱窗口
m1.click(' 沙盘驾驶舱', '', 1905, 10)
else:
raise Exception("未打开沙盘驾驶舱窗口")
else:
raise Exception("未识别BECivil窗口")
def start_BECivli(self):
"""登录BECivil"""
# 判断屏幕分辨率是否为1920*1080
if verifySystemMetrics(1920, 1080) == True:
pass
else:
raise Exception("分辨率不为1920*1080，请更改分辨率")
# 判断Shell、BECivil和IM是否存在，若存在则退出
processes = [
ProcessControl(self.IMProcess),
ProcessControl(self.BECivilProcess),
ProcessControl(self.ShellProcess)
]
for process in processes:
if process.exists():
process.close()
# 启动软件以及登录
try:
autoit.run(self.path)
except Exception as e:
print(e)
print('软件安装路径有误，或者软件安装路径中有中文，\nstart_APP函数中path变量前需要加r！')
else:
w1 = WinControl('用户登录')
w1.wait()
if w1.exists():
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', self.username)
w1.controlSetText('[CLASS:Edit; INSTANCE:2]', self.password)
w1.controlSetText('[CLASS:Edit; INSTANCE:3]', self.ip)
w1.controlClick('Button1')
# 等待BECivil界面
w2 = WinControl(self.BECivilWin)
w2.wait(25)
w2.setState(3)
sleep(1)
"""
def upload_picture(self):
""" """
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.上传图片[0],
screen_point.上传图片[1])
sleep(1)
w1 = WinControl('打开')
if w1.exists():
w1.wait(3)
m1.click('打开', '', 1110, 45)
sleep(1)
w1.controlSetText('[CLASS:Edit; INSTANCE:2]',
self.uploadaddress)
autoit.send("{ENTER}")
sleep(1)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', r'picture1.jpg')
sleep(1)
w1.controlClick("[CLASS:Button; INSTANCE:1]")
sleep(3)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (874, 438, 1046, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未弹出上传成功窗口")
else:
raise Exception("未弹出打开窗口")
else:
raise Exception("未识别BECivil窗口")
def local_task(self):
"""本地任务"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0], screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.本地任务[0], screen_point.本地任务[1])
w1 = WinControl(" 本机处理任务")
if w1.exists():
w1.wait(3)
w1.setState(3)
# 历史记录
m1.click(" 本机处理任务", '', 85, 30)
# 删除此次上传的两条记录
for i in range(2):
m1.click(" 本机处理任务", '', 50, 90)
w1.controlClick('Button1')
if w0.exists():
w0.waitActive(3)
# 识别确定删除窗口关联的进程ID
t = w0.getPos()
if t == (845, 438, 1075, 602):
pass
else:
raise Exception("未成功删除该任务")
sleep(1)
w0.controlClick('Button1')
sleep(1)
else:
raise Exception("未成功删除该任务")
sleep(1)
# 关闭本机处理任务
m1.click(" 本机处理任务", '', 1905, 5)
else:
raise Exception("未选中本机任务窗口")
else:
raise Exception("未识别BECivil窗口")
def cooperation_management(self):
"""协作管理"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.协作[0],
screen_point.协作[1])
m1.click(self.BECivilWin, '', screen_point.协作管理[0],
screen_point.协作管理[1])
sleep(15)
w1 = WinControl('Luban Cooperation')
if w1.exists():
w1.wait(3)
w1.setState(3)
sleep(2)
# 确认协作已删除
m1.click('Luban Cooperation', '', 960, 575)
sleep(1)
# 关闭CO
m1.click('Luban Cooperation', '', 1882, 29)
else:
raise Exception("未能打开鲁班协作窗口")
# 从后台关闭CO
sleep(3)
ps = [
ProcessControl(self.COProcess),
ProcessControl(self.SuspernsionCtrlProcess)
]
for p in ps:
if p.exists():
p.wait(6)
p.close()
else:
print('未找到运行的鲁班协作程序')
else:
raise Exception("未识别BECivil窗口")
def delete_contract_managemeng(self):
"""删除合同"""
if WinControl(self.IMWin).exists():
m1 = MouseControl()
m1.click(self.IMWin, '', screen_point.工程管理[0],
screen_point.工程管理[1])
m1.click(self.IMWin, '', screen_point.合同管理[0],
screen_point.合同管理[1])
m1.click(self.IMWin, '', screen_point.删除施工合同[0],
screen_point.删除施工合同[1])
m1.click(self.IMWin, '', screen_point.确认删除合同[0],
screen_point.确认删除合同[1])
else:
raise Exception('没有检测到IM窗口！')
def export_the_qr_code(self):
"""导出二维码"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.操作[0], screen_point.操作[1])
m1.click(self.BECivilWin, '', screen_point.导出二维码[0], screen_point.导出二维码[1])
# 选中需要导出二维码的构件
m1.click(self.BECivilWin, '', 810, 500)
# 右键导出
m1.click(self.BECivilWin, '', 810, 500, button='right')
m1.click(self.BECivilWin, '', 730, 510)
sleep(2)
w1 = WinControl('选择文件夹')
if w1.exists():
w1.wait(3)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', self.downloadaddress + '\二维码下载')
sleep(1)
w1.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception("未打开选择文件夹窗口")
sleep(3)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (862, 438, 1058, 602):
pass
else:
raise Exception('Something went wrong.')
sleep(1)
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception("未弹出导出二维码成功窗口")
else:
raise Exception("未识别BECivil窗口")
def add_form(self, y1=515, message='封面'):
"""添加表单用"""
w0 = WinControl("添加表单")
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click('添加表单', '', 990, 495)
sleep(1)
m1.click('添加表单', '', 990, y1)
sleep(0.5)
m1.click('添加表单', '', 990, 530)
autoit.send(message)
sleep(0.5)
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception('添加表单未成功')
def statistics_panel(self):
"""统计面板"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.统计面板[0],
screen_point.统计面板[1])
sleep(2)
w0.controlClick("[CLASS:Button; INSTANCE:29]")
sleep(2)
w0.controlClick("[CLASS:Button; INSTANCE:29]")
else:
raise Exception("未识别BECivil窗口")
def edit_contract_management(self):
"""编辑合同"""
if WinControl(self.IMWin).exists():
m1 = MouseControl()
m1.click(self.IMWin, '', screen_point.编辑施工合同[0],
screen_point.编辑施工合同[1])
sleep(3)
m1.click(self.IMWin, '', screen_point.施工负责人[0],
screen_point.施工负责人[1])
autoit.send(self.message12)
m1.click(self.IMWin, '', screen_point.总监理工程师[0],
screen_point.总监理工程师[1])
autoit.send(self.message13)
m1.click(self.IMWin, '', screen_point.项目总工[0],
screen_point.项目总工[1])
autoit.send(self.message14)
m1.click(self.IMWin, '', screen_point.保存[0], screen_point.保存[1])
else:
raise Exception('没有检测到IM窗口！')
def refresh_data(self):
"""刷新数据"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.刷新数据[0],
screen_point.刷新数据[1])
sleep(4)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (838, 438, 1082, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("数据刷新未完成")
else:
raise Exception("未识别BECivil窗口")
