def setup_test_zone(case):
"""
Test setup for network zone test cases
:param case: test case
"""
if not libvirt_version.version_compare(6, 0, 0):
test.cancel('Version of libvirt is too low for this test.')
# Make sure firewalld version supports current test
rpmb = rpm.RpmBackend()
if rpmb.check_installed('firewalld', '0.6.0'):
logging.info('Version of firewalld meets expectation')
else:
test.cancel('Version of firewalld is too low to finish this test.')
setup_firewalld()
# Setup zone for bridge
netxml = NetworkXML.new_from_net_dumpxml(net)
if case == 'public':
netxml.bridge = {'name': bridge_name, 'zone': 'public'}
elif case == 'info':
netxml.bridge = {'name': bridge_name}
else:
test.error('Test "%s" is not supported.' % case)
netxml.forward = {'mode': 'nat'}
netxml.sync()
logging.debug('Updated net:\n%s', virsh.net_dumpxml(net).stdout_text)
def run(test, params, env):
"""
Test interface devices update
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
network_name = params.get('network_name', 'default')
new_network_name = params.get("net_name")
expect_error = "yes" == params.get("status_error", "no")
expect_err_msg = params.get("expect_err_msg")
iface_driver = params.get("iface_driver")
iface_driver_host = params.get("iface_driver_host")
iface_driver_guest = params.get("iface_driver_guest")
iface_model = params.get("iface_model")
iface_mtu = params.get("iface_mtu")
iface_rom = params.get("iface_rom")
iface_filter = params.get("iface_filter")
iface_boot = params.get('iface_boot')
iface_coalesce = params.get('iface_coalesce')
new_iface_driver = params.get("new_iface_driver")
new_iface_driver_host = params.get("new_iface_driver_host")
new_iface_driver_guest = params.get("new_iface_driver_guest")
new_iface_model = params.get("new_iface_model")
new_iface_rom = params.get("new_iface_rom")
new_iface_inbound = params.get("new_iface_inbound")
new_iface_outbound = params.get("new_iface_outbound")
new_iface_link = params.get("new_iface_link")
new_iface_source = params.get("new_iface_source")
new_iface_target = params.get("new_iface_target")
new_iface_addr = params.get("new_iface_addr")
new_iface_filter = params.get("new_iface_filter")
new_iface_mtu = params.get("new_iface_mtu")
new_iface_type = params.get("new_iface_type")
create_new_net = "yes" == params.get("create_new_net")
new_iface_alias = params.get("new_iface_alias")
new_iface_coalesce = params.get('new_iface_coalesce')
cold_update = "yes" == params.get("cold_update", "no")
del_addr = "yes" == params.get("del_address")
del_rom = "yes" == params.get("del_rom")
del_filter = "yes" == params.get("del_filter")
check_libvirtd = "yes" == params.get("check_libvirtd")
new_iface_filter_parameters = eval(
params.get("new_iface_filter_parameters", "{}"))
rules = eval(params.get("rules", "{}"))
del_mac = "yes" == params.get("del_mac", "no")
del_coalesce = 'yes' == params.get('del_coalesce', 'no')
del_net_bandwidth = 'yes' == params.get('del_net_bandwidth', 'no')
# Backup the vm xml for recover at last
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
netxml_backup = network_xml.NetworkXML.new_from_net_dumpxml(network_name)
try:
# Prepare network
netxml = network_xml.NetworkXML.new_from_net_dumpxml(network_name)
logging.debug('Network xml before update:\n%s', netxml)
if del_net_bandwidth:
netxml.del_element('/bandwidth')
logging.debug('Network xml after update:\n%s', netxml)
# According to the different os find different file for rom
if (iface_rom and "file" in eval(iface_rom)
and "%s" in eval(iface_rom)['file']):
if rpm.RpmBackend().check_installed('ipxe-roms-qemu', '20200823'):
logging.debug("Update the file path since " "ipxe-20200823-5:")
iface_rom_new = iface_rom.replace('qemu-kvm', 'ipxe/qemu')
iface_rom = iface_rom_new
if os.path.exists(eval(iface_rom)['file'] % "pxe"):
iface_rom = iface_rom % "pxe"
elif os.path.exists(eval(iface_rom)['file'] % "efi"):
iface_rom = iface_rom % "efi"
else:
logging.error("Can not find suitable rom file")
iface_dict_bef = {}
iface_dict_aft = {}
names = locals()
# Collect need update items in 2 dicts for both start vm before and after
update_list_bef = [
"driver", 'driver_host', 'driver_guest', "model", "mtu", "rom",
"filter", 'boot', 'coalesce'
]
for update_item_bef in update_list_bef:
if names['iface_' + update_item_bef]:
iface_dict_bef.update(
{update_item_bef: names['iface_' + update_item_bef]})
update_list_aft = [
"driver", "driver_host", "driver_guest", "model", "rom", "inbound",
"outbound", "link", "source", "target", "addr", "filter", "mtu",
"type", "alias", "filter_parameters", "coalesce"
]
for update_item_aft in update_list_aft:
if names["new_iface_" + update_item_aft]:
iface_dict_aft.update(
{update_item_aft: names["new_iface_" + update_item_aft]})
logging.info("iface_dict_bef is %s, iface_dict_aft is %s",
iface_dict_bef, iface_dict_aft)
del_list = [
"del_addr", "del_rom", "del_filter", "del_mac", "del_coalesce"
]
for del_item in del_list:
if names[del_item]:
iface_dict_aft.update({del_item: names[del_item]})
# Operations before updating vm's iface xml
if iface_boot:
disk_boot = params.get('disk_book', 1)
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
# Remove os boot config
vm_os = vmxml.os
vm_os.del_boots()
vmxml.os = vm_os
# Add boot config to disk
disk = vmxml.get_devices('disk')[0]
target_dev = disk.target.get('dev', '')
logging.debug('Will set boot order %s to device %s', disk_boot,
target_dev)
vmxml.set_boot_order_by_target_dev(target_dev, disk_boot)
vmxml.sync()
# Update vm interface with items in iface_dict_bef and start it
if iface_dict_bef:
libvirt.modify_vm_iface(vm_name, "update_iface", iface_dict_bef)
logging.info("vm xml is %s", vm.get_xml())
if not cold_update:
vm.start()
if iface_mtu:
# Do check for mtu size after start vm
target_dev = libvirt.get_interface_details(vm_name)[0]['interface']
cmd = "ip link show %s | grep 'mtu %s'" % (target_dev,
eval(iface_mtu)['size'])
def check_mtu():
"""
Check the mtu setting take effect for interface
"""
ret = process.run(cmd, ignore_status=True, shell=True)
if ret.exit_status:
test.fail("Can not find mtu setting in cmd result")
check_mtu()
utils_libvirtd.libvirtd_restart()
check_mtu()
# Create new network if need
if create_new_net:
new_net_xml = libvirt.create_net_xml(new_network_name, params)
new_net_xml.sync()
# Do update for iface_driver
logging.info('Creating new iface xml.')
new_iface_xml = libvirt.modify_vm_iface(vm_name, "get_xml",
iface_dict_aft)
bef_pid = process.getoutput("pidof -s libvirtd")
ret = virsh.update_device(vm_name,
new_iface_xml,
ignore_status=True,
debug=True)
libvirt.check_exit_status(ret, expect_error)
if check_libvirtd:
aft_pid = process.getoutput("pidof -s libvirtd")
if aft_pid != bef_pid:
test.fail("libvirtd crash after update-device!")
else:
logging.info("libvirtd do not crash after update-device!")
if expect_error:
real_err_msg = ret.stderr.strip()
if not re.search(expect_err_msg, real_err_msg, re.IGNORECASE):
test.fail("The real error msg:'%s' does not match expect one:"
'%s' % (real_err_msg, expect_err_msg))
else:
logging.info("Get expect result: %s", real_err_msg)
else:
if new_iface_inbound:
iface_bandwidth = {}
iface_bandwidth = vm_xml.VMXML.get_iftune_params(vm_name)
for bound_para in ["inbound", "outbound"]:
for tune_para in ["average", "peak", "burst"]:
get_value = iface_bandwidth.get(bound_para).get(
tune_para)
expect_value = eval(names["new_iface_" +
bound_para]).get(tune_para)
logging.info("Get value for %s:%s is %s, expect is %s",
bound_para, tune_para, get_value,
expect_value)
if get_value != expect_value:
test.fail("Get value is not equal to expect")
vmxml_aft = vm_xml.VMXML.new_from_dumpxml(vm_name)
iface_aft = list(vmxml_aft.get_iface_all().values())[0]
if new_iface_link:
iface_link_value = iface_aft.find('link').get('state')
if iface_link_value == new_iface_link:
logging.info("Find link state is %s in xml",
new_iface_link)
# Checking the statue in guest
mac_addr = iface_aft.find('mac').get('address')
state_map = "%s.*\n.*%s" % (iface_link_value.upper(),
mac_addr)
session = vm.wait_for_serial_login()
logging.info("ip link output:%s",
session.cmd_output("ip link"))
if_name = utils_net.get_net_if(runner=session.cmd_output,
state=state_map)[0]
if not check_iface_link(session, mac_addr, new_iface_link):
test.fail('iface link check inside vm failed.')
session.close()
if if_name:
logging.info("Find iface state %s for %s",
iface_link_value, mac_addr)
else:
test.fail(
"Can not find iface with mac %s and state %s" %
(mac_addr, iface_link_value))
else:
test.fail(
"Check fail to get link state, expect %s, but get %s" %
(iface_link_value, new_iface_link))
if create_new_net and new_iface_source:
iface_source_value = iface_aft.find('source').get('network')
if iface_source_value == eval(new_iface_source)['network']:
logging.info("Get %s in xml as set", iface_source_value)
else:
test.fail("Get source %s is not equal to set %s" %
(iface_source_value, new_iface_source))
if new_iface_filter:
iface_filter_value = iface_aft.find('filterref').get('filter')
if iface_filter_value == new_iface_filter:
logging.info("Get %s in xml as set", iface_filter_value)
else:
test.fail("Get filter %s is not equal to set %s" %
(iface_filter_value, new_iface_filter))
if new_iface_filter_parameters:
ebtables_outputs = process.run("ebtables -t nat -L",
shell=True).stdout_text
for rule in rules:
if rule not in ebtables_outputs:
test.fail(
"Can not find the corresponding rule after update filter with parameters!"
)
if del_filter:
# if the filter is deleted, it should not exists in the xml and the rules should be deleted as well
iface_filter_value = iface_aft.find('filterref')
if iface_filter_value is not None:
test.fail("After delete, the filter still exists: %s" %
iface_filter_value)
ebtables_outputs = process.run("ebtables -t nat -L",
shell=True).stdout_text
logging.debug("after nwfilter deleted, ebtables rules are %s" %
ebtables_outputs)
time.sleep(5)
entries_num = re.findall(r'entries:\s+(\d)', ebtables_outputs)
for i in entries_num:
if i != '0':
test.fail("After delete, the rules are still exists!")
if new_iface_alias:
iface_alias_value = iface_aft.find('alias').get('name')
if iface_alias_value == eval(new_iface_alias)['name']:
logging.info("Get %s in xml as set", iface_alias_value)
else:
test.fail("Get alias %s is not equal to set %s" %
(iface_alias_value, new_iface_alias))
if 'update_coalesce' in params['name'] or new_iface_coalesce:
iface_coalesce_val = iface_aft.find('coalesce').find(
'rx').find('frames').get('max')
if iface_coalesce_val == str(eval(new_iface_coalesce)['max']):
logging.info('coalesce update check PASS.')
else:
test.fail('coalesce value not updated.')
if del_coalesce:
if iface_aft.find('coalesce') is None:
logging.info('coalesce delete check PASS.')
else:
test.fail('coalesce not deleted.')
finally:
vmxml_backup.sync()
netxml_backup.sync()
if create_new_net:
new_net_xml.undefine()