Beispiel #1
0
    def __init__(self, *args, **kargs):
        super(CylixUSB8in8out1in8outOTGUtil, self).__init__(*args, **kargs)
        self.logger = Logger(self.__class__.__name__)

        #self.config = CaseConfig
        self.topoconfig = TopoConfig

        self.ats_home = TopoConfig['Topo']['ats_home']

        self.dut_serial_name = TopoConfig['Device']['dut_serial_name']
        self.dut_serial = None

        self.cylix_serial_name = TopoConfig['Topo']['cylix_serial_name']
        self.cylix_line = int(TopoConfig['Device']['cylix_line'])
        self.cylix = None

        if TopoConfig['Topo'].has_key('1in8out_slot'):
            self.cylix_1in8out_slot = str(TopoConfig['Topo']['1in8out_slot'])
        else:
            self.cylix_1in8out_slot = 'U27'

        self.serial_log_filename = os.path.join(
            str(TopoConfig['Device']['log_path']),
            '%s_%s.log' % (
                self.__class__.__name__,
                self.dut_serial_name.replace(os.sep, ''))
            )
Beispiel #2
0
class CylixUSB8in8out1in8outUtil(unittest.TestCase):
    """
    The different between CylixUSB8in8out1in8outUtil and CylixUSB8in8outUtil
    is that the Topology of CylixUSB8in8out1in8outUtil includes both
    8in8out and 1in8out switcher. But user will not use OTG
    function, DUT only acts as 'usb device'
    """
    PRE_INSTALL_APK = []
    PRE_INSTALL_JAR = []
    PRE_INSTALL_RES = []

    def __init__(self, *args, **kargs):
        super(CylixUSB8in8out1in8outUtil, self).__init__(*args, **kargs)
        self.logger = Logger(self.__class__.__name__)

        #self.config = CaseConfig
        self.topoconfig = TopoConfig

        self.ats_home = TopoConfig['Topo']['ats_home']

        self.dut_serial_name = TopoConfig['Device']['dut_serial_name']
        self.dut_serial = None

        self.cylix_serial_name = TopoConfig['Topo']['cylix_serial_name']
        self.cylix_line = int(TopoConfig['Device']['cylix_line'])
        self.cylix = None

        if TopoConfig['Topo'].has_key('1in8out_slot'):
            self.cylix_1in8out_slot = str(TopoConfig['Topo']['1in8out_slot'])
        else:
            self.cylix_1in8out_slot = 'U27'

        self.serial_log_filename = os.path.join(
            str(TopoConfig['Device']['log_path']),
            '%s_%s.log' % (
                self.__class__.__name__,
                self.dut_serial_name.replace(os.sep, ''))
            )

    def setUp(self):
        self.logger.info('Testcase setup.')
        self.dut_serial = AWSerial(
            self.dut_serial_name,
            filename=self.serial_log_filename,
            )


        self.switch = USBSwitch8in8out(
            self.cylix_serial_name)
        self.ms_switch = USBSwitch1in8out(
            self.cylix_serial_name,
            self.cylix_1in8out_slot)
        # initialize the 1in8out switcher, so that
        # user only need to care about 8in8out switcher
        # step 1: high voltage for OTG line
        # step 2: disconnect all line for 1in8out
        # step 3: connect line 8 to provide power
        # step 4: connect line 1 for PC/Power
        high_volt = '1'
        self.switch.ctr_volt(self.cylix_line, high_volt)
        for i in range(8):
            self.ms_switch.disconnect(i+1)
        self.ms_switch.connect(8)
        self.ms_switch.connect(1)
        self.switch.switch2usb(self.cylix_line)

        self.device = AndroidDevice(adb=Adb(
            device_name=str(TopoConfig['Device']['name'])))
        self.device.adb.wait_for_device()

        # install apk
        for path, package in self.PRE_INSTALL_APK:
            self.device.adb.install(os.path.join(self.ats_home, path), 
                                    reinstall=True)
            assert self.device.adb.get_output().count("Success") > 0, \
                "Fail to install apk %s" % path

        # push java jar file
        for jar in self.PRE_INSTALL_JAR:
            self.device.adb.push(os.path.join(self.ats_home, jar), 
                                 "/data/local/tmp/")

        for local, remote_path, remote_file in self.PRE_INSTALL_RES:
            self.device.adb.push(os.path.join(self.ats_home, local),
                                 remote_path + remote_file)

    def setUpWithoutConnectToUSB(self):
        self.logger.info('Testcase setup.')
        self.dut_serial = AWSerial(
            self.dut_serial_name,
            filename=self.serial_log_filename,
            )


        self.switch = USBSwitch8in8out(
            self.cylix_serial_name)
        self.ms_switch = USBSwitch1in8out(
            self.cylix_serial_name,
            self.cylix_1in8out_slot)
        # initialize the 1in8out switcher, so that
        # user only need to care about 8in8out switcher
        # step 1: high voltage for OTG line
        # step 2: disconnect all line for 1in8out
        # step 3: connect line 8 to provide power
        # step 4: connect line 1 for PC/Power
        high_volt = '1'
        self.switch.ctr_volt(self.cylix_line, high_volt)
        for i in range(8):
            self.ms_switch.disconnect(i+1)
        self.ms_switch.connect(8)
        self.ms_switch.connect(1)
        self.switch.switch2usb(self.cylix_line)

        self.device = AndroidDevice(adb=Adb(
            device_name=str(TopoConfig['Device']['name'])))

    def tearDown(self):
        self.logger.info('Testcase teardown.')
        self.dut_serial.close()
        self.switch.switch2usb(self.cylix_line)
        self.device.adb.wait_for_device()
        self.atTestCaseExit()
        for path, package in self.PRE_INSTALL_APK:
            self.device.adb.uninstall(package)
        if len(self.PRE_INSTALL_JAR) > 0:
            self.device.adb.shell("rm /data/local/tmp/*.jar")
        for local, remote_path, remote_file in self.PRE_INSTALL_RES:
            self.device.adb.shell("rm %s%s" % (remote_path, remote_file))
        self.switch.switch2power(self.cylix_line)
        
    def atTestCaseExit(self):
        pass
Beispiel #3
0
class CylixUSB8in8out1in8outOTGUtil(unittest.TestCase):
    """
    The different between CylixUSB8in8out1in8outOTGUtil and 
    CylixUSB8in8out1in8outUtil is that the Topology of 
    CylixUSB8in8out1in8outOTGUtil includes both
    8in8out and 1in8out switcher. And user will use OTG function.
    """
    PRE_INSTALL_APK = []
    PRE_INSTALL_JAR = []
    PRE_INSTALL_RES = []

    def __init__(self, *args, **kargs):
        super(CylixUSB8in8out1in8outOTGUtil, self).__init__(*args, **kargs)
        self.logger = Logger(self.__class__.__name__)

        #self.config = CaseConfig
        self.topoconfig = TopoConfig

        self.ats_home = TopoConfig['Topo']['ats_home']

        self.dut_serial_name = TopoConfig['Device']['dut_serial_name']
        self.dut_serial = None

        self.cylix_serial_name = TopoConfig['Topo']['cylix_serial_name']
        self.cylix_line = int(TopoConfig['Device']['cylix_line'])
        self.cylix = None

        if TopoConfig['Topo'].has_key('1in8out_slot'):
            self.cylix_1in8out_slot = str(TopoConfig['Topo']['1in8out_slot'])
        else:
            self.cylix_1in8out_slot = 'U27'

        self.serial_log_filename = os.path.join(
            str(TopoConfig['Device']['log_path']),
            '%s_%s.log' % (
                self.__class__.__name__,
                self.dut_serial_name.replace(os.sep, ''))
            )

    def setUp(self):
        self.logger.info('Testcase setup.')
        self.dut_serial = AWSerial(
            self.dut_serial_name,
            filename=self.serial_log_filename,
            )

        self.switch = DevMSSwitcher(
            self.cylix_serial_name,
            u_slot=self.cylix_1in8out_slot)
        self.switch.switch2SlaveUsb(self.cylix_line)

        self.device = AndroidDevice(adb=Adb(
            device_name=str(TopoConfig['Device']['name'])))
        self.device.adb.wait_for_device()

        # install apk
        for path, package in self.PRE_INSTALL_APK:
            self.device.adb.install(os.path.join(self.ats_home, path), 
                                    reinstall=True)
            assert self.device.adb.get_output().count("Success") > 0, \
                "Fail to install apk %s" % path

        # push java jar file
        for jar in self.PRE_INSTALL_JAR:
            self.device.adb.push(os.path.join(self.ats_home, jar), 
                                 "/data/local/tmp/")

        for local, remote_path, remote_file in self.PRE_INSTALL_RES:
            self.device.adb.push(os.path.join(self.ats_home, local),
                                 remote_path + remote_file)

    def tearDown(self):
        self.logger.info('Testcase teardown.')
        self.dut_serial.close()
        self.switch.switch2SlaveUsb(self.cylix_line)
        self.device.adb.wait_for_device()
        self.atTestCaseExit()
        for path, package in self.PRE_INSTALL_APK:
            self.device.adb.uninstall(package)
        if len(self.PRE_INSTALL_JAR) > 0:
            self.device.adb.shell("rm /data/local/tmp/*.jar")
        for local, remote_path, remote_file in self.PRE_INSTALL_RES:
            self.device.adb.shell("rm %s%s" % (remote_path, remote_file))
        self.switch.switch2SlavePower(self.cylix_line)

    def atTestCaseExit(self):
        pass
Beispiel #4
0
class CylixUSB8in8outUtil(unittest.TestCase):
    PRE_INSTALL_APK = []
    PRE_INSTALL_JAR = []
    PRE_INSTALL_RES = []

    def __init__(self, *args, **kargs):
        super(CylixUSB8in8outUtil, self).__init__(*args, **kargs)
        self.logger = Logger(self.__class__.__name__)

        #self.config = CaseConfig
        self.topoconfig = TopoConfig

        self.ats_home = TopoConfig['Topo']['ats_home']

        self.dut_serial_name = TopoConfig['Device']['dut_serial_name']
        self.dut_serial = None

        #self.cylix_serial_name = TopoConfig['Topo']['cylix_serial_name']
        #self.cylix_line = int(TopoConfig['Device']['cylix_line'])
        #self.cylix = None

        self.serial_log_filename = os.path.join(
            str(TopoConfig['Device']['log_path']),
            '%s_%s.log' % (
                self.__class__.__name__,
                self.dut_serial_name.replace(os.sep, ''))
            )

    def setUp(self):
        self.logger.info('Testcase setup.')
        self.dut_serial = AWSerial(
            self.dut_serial_name,
            filename=self.serial_log_filename,
            )


        #self.switch = USBSwitch8in8out(
        #    self.cylix_serial_name)
        #self.switch.switch2usb(self.cylix_line)

        self.device = AndroidDevice(adb=Adb(
            device_name=str(TopoConfig['Device']['name'])))
        #self.device.adb.wait_for_device()

        # install apk
        for path, package in self.PRE_INSTALL_APK:
            self.device.adb.install(os.path.join(self.ats_home, path), 
                                    reinstall=True)
            assert self.device.adb.get_output().count("Success") > 0, \
                "Fail to install apk %s" % path

        # push java jar file
        for jar in self.PRE_INSTALL_JAR:
            self.device.adb.push(os.path.join(self.ats_home, jar), 
                                 "/data/local/tmp/")

        for local, remote_path, remote_file in self.PRE_INSTALL_RES:
            self.device.adb.push(os.path.join(self.ats_home, local),
                                 remote_path + remote_file)

    def tearDown(self):
        self.logger.info('Testcase teardown.')
        self.dut_serial.close()
        #self.switch.switch2usb(self.cylix_line)
        #self.device.adb.wait_for_device()
        self.atTestCaseExit()
        for path, package in self.PRE_INSTALL_APK:
            self.device.adb.uninstall(package)
        if len(self.PRE_INSTALL_JAR) > 0:
            self.device.adb.shell("rm /data/local/tmp/*.jar")
        for local, remote_path, remote_file in self.PRE_INSTALL_RES:
            self.device.adb.shell("rm %s%s" % (remote_path, remote_file))
        #self.switch.switch2power(self.cylix_line)
        
    def atTestCaseExit(self):
        pass