def onDevRescan(self, event): berry = bb_usb.find_berry(None, None) if berry != None: if berry.handle==None: berry.open_handle() prefs=bb_prefs.get_prefs() prefs.remove_section(bb_prefs.SECTION_SCANNED_EP) #Note: will replace prefs with sanedd values bb_usb.read_bb_endpoints(berry, None)
def onDevRescan(self, event):
berry = bb_usb.find_berry(None, None)
if berry != None:
if berry.handle == None:
berry.open_handle()
prefs = bb_prefs.get_prefs()
prefs.remove_section(bb_prefs.SECTION_SCANNED_EP)
#Note: will replace prefs with sanedd values
bb_usb.read_bb_endpoints(berry, None)
def start(self, options, args):
bb_messenging.verbose = True
# Need to be root (unless udev or OSX)
if os.getuid() != 0:
bb_messenging.log(
"\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\nThis might will only work as root!\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
)
bb_util.remove_berry_charge()
bb_osx.prepare_osx()
berry = None
berry = bb_usb.find_berry(None, None)
if berry != None:
# open the connection
if berry.handle == None:
berry.open_handle()
berry.read_endpoints(None)
bb_util.remove_berry_charge()
if berry.readpt == -1:
bb_messenging.warn(
["\nNo good Data Endpoint pair, bailing out !"])
else:
bb_messenging.log("\nUsing Data Endpoint Pair:" +
hex(berry.readpt) + "/" + hex(berry.writept))
bb_messenging.log("Using Modem pair: " +
hex(berry.modem_readpt) + "/" +
hex(berry.modem_writept) + "\n")
bb_messenging.log("Claiming interface " + str(berry.interface))
berry.claim_interface()
berry.read_infos()
bb_messenging.log("Pin: " + hex(berry.pin))
bb_messenging.log("Description: " + berry.desc)
bb_usb.set_mode(berry, bb_usb.COMMAND_MODE_DESKTOP)
bb_usb.usb_read(berry, berry.readpt)
bb_usb.usb_write(berry, berry.writept,
[00, 00, 0x7, 00, 0xa, 04, 00])
bb_usb.usb_read(berry, berry.readpt)
bb_usb.usb_write(
berry, berry.writept,
[04, 00, 0xc, 00, 0x40, 00, 00, 00, 0x25, 0x80, 0x8, 00])
bb_usb.usb_read(berry, berry.readpt)
time.sleep(2)
bb_usb.usb_read(berry, berry.readpt)
else:
bb_messenging.warn(["\nNo RIM device found"])
def start(self, options, args):
bb_messenging.verbose = True
# Need to be root (unless udev or OSX)
if os.getuid() != 0:
bb_messenging.log("\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\nThis might will only work as root!\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n")
bb_util.remove_berry_charge()
bb_osx.prepare_osx()
berry = None
berry = bb_usb.find_berry(None,None)
if berry != None:
# open the connection
if berry.handle==None:
berry.open_handle()
berry.read_endpoints(None)
bb_util.remove_berry_charge()
if berry.readpt == -1:
bb_messenging.warn(["\nNo good Data Endpoint pair, bailing out !"])
else:
bb_messenging.log("\nUsing Data Endpoint Pair:"+ hex(berry.readpt)+ "/"+ hex(berry.writept))
bb_messenging.log("Using Modem pair: "+ hex(berry.modem_readpt)+ "/"+ hex(berry.modem_writept)+ "\n")
bb_messenging.log("Claiming interface "+str(berry.interface))
berry.claim_interface()
berry.read_infos()
bb_messenging.log("Pin: "+ hex(berry.pin))
bb_messenging.log("Description: "+ berry.desc)
bb_usb.set_mode(berry,bb_usb.COMMAND_MODE_DESKTOP)
bb_usb.usb_read(berry,berry.readpt)
bb_usb.usb_write(berry,berry.writept,[00,00,0x7,00,0xa,04,00])
bb_usb.usb_read(berry,berry.readpt)
bb_usb.usb_write(berry,berry.writept,[04,00,0xc,00,0x40,00,00,00,0x25,0x80,0x8,00])
bb_usb.usb_read(berry,berry.readpt)
time.sleep(2)
bb_usb.usb_read(berry,berry.readpt)
else:
bb_messenging.warn(["\nNo RIM device found"])
def __init__(self, parent, ID, title):
global icon
self.bbtether=None
sys.stdout = SysOutListener()
wx.Frame.__init__(self, parent, ID, title, wx.DefaultPosition)
self.SetIcon(get_icon())
self.CreateStatusBar()
self.SetStatusText("")
menuBar = wx.MenuBar()
menu_file = wx.Menu()
menu_file.Append(MENU_PREFS, "&Preferences", "Preferences")
menu_file.Append(MENU_CLEAR_CONSOLE, "&Clear Log Console", "Clear the log console.")
menu_file.AppendSeparator()
menu_file.Append(MENU_EXIT, "E&xit", "Terminate the program")
#item = wx.MenuItem(menu, 0, "Some Item")
#item.Enable(False)
menuBar.Append(menu_file, "&File");
menu_dev = wx.Menu()
#menu_dev.Append(MENU_DEV_CHARGE, "&Charge", "Put in charge mode (If the BB complains about low voltage)")
menu_dev.AppendSeparator()
menu_dev.Append(MENU_DEV_RESCAN, "Re&scan", "Force rescan of device endpoints")
menu_dev.AppendSeparator()
#menu_dev.Append(MENU_DEV_RESET, "&Reset", "Force device reset(if stuck)")
menuBar.Append(menu_dev, "&Device");
menu_modem = wx.Menu()
menu_modem.Append(MENU_CONNECT, "&Connectar", "Conectar modem")
menu_modem.Append(MENU_DISCONNECT, "&Desconectar", "Desconectar modem")
menuBar.Append(menu_modem, "&Modem");
#menu_todo = wx.Menu()
#menu_todo.Append(MENU_CONNECT, "&Upload App", "COB / JAD")
#menu_todo.Append(MENU_DISCONNECT, "&Backup", "")
#menuBar.Append(menu_todo, "&Firmware");
menu_help = wx.Menu()
menu_help.Append(MENU_ABOUT, "&About", "More information about this program")
menuBar.Append(menu_help, "&Help");
self.SetMenuBar(menuBar)
# Menu events
wx.EVT_MENU(self, MENU_ABOUT, self.onAbout)
wx.EVT_MENU(self, MENU_EXIT, self.onQuit)
wx.EVT_MENU(self, MENU_CONNECT, self.onStart)
wx.EVT_MENU(self, MENU_DISCONNECT, self.onStop)
wx.EVT_MENU(self, MENU_DEV_CHARGE, self.onCharge)
wx.EVT_MENU(self, MENU_DEV_RESET, self.onDevReset)
wx.EVT_MENU(self, MENU_DEV_RESCAN, self.onDevRescan)
wx.EVT_MENU(self, MENU_PREFS, self.onPrefs)
wx.EVT_MENU(self, MENU_CLEAR_CONSOLE, self.onClearConsole)
# close button
self.Bind(wx.EVT_CLOSE, self.onQuit)
sizer=wx.BoxSizer(wx.VERTICAL)
self.modem_panel=ModemPanel(self)
self.log_pane = wx.TextCtrl(self, wx.ID_ANY, "", (4, 4), (700, 300), style=wx.TE_MULTILINE | wx.TE_READONLY)
sizer.Add(self.modem_panel,0,wx.EXPAND)
sizer.Add(self.log_pane,0,wx.EXPAND)
self.SetSizer(sizer)
self.Fit()
self.CenterOnScreen()
# Binding custom events
self.Bind(EVT_LOG_APPEND, self.onLogEvent)
self.Bind(EVT_STATUS, self.onStatus)
self.Bind(EVT_WARN, self.onWarn)
self.Bind(EVT_ASK, self.onAsk)
self.Bind(EVT_INFO, self.onInfo)
self.Bind(EVT_NETWORK_STATS, self.onStats)
berry = bb_usb.find_berry(None, None)
if berry != None:
if berry.handle==None:
berry.open_handle()
prefs=bb_prefs.get_prefs()
prefs.remove_section(bb_prefs.SECTION_SCANNED_EP)
#Note: will replace prefs with sanedd values
bb_usb.read_bb_endpoints(berry, None)
dlg = wx.MessageDialog(self, "You should Disconnect before quitting!\nOtherwise your Blackberry might need a reboot\n\nDo you want to Quit anyway ?\n", "Warning !", wx.OK | wx.CANCEL)
result = wx.ID_OK
dlg.Destroy()
if result != wx.ID_OK:
return
if self.prefs != None:
try:
self.prefs.Destroy()
except:
pass
try:
self.Destroy()
except:
pass
def onDevReset(self, event): berry = bb_usb.find_berry(None, None) if berry != None: if berry.handle==None: berry.open_handle() bb_usb.reset(berry)
def onCharge(self, event): berry = bb_usb.find_berry(None, None) if berry != None: if berry.handle==None: berry.open_handle() bb_usb.set_bb_power(berry)
http://www.wxpython.org/docs/api/ ''' import os import sys import time import base64 import bb_messenging import bb_prefs import bb_tether import bb_usb import threading berry = bb_usb.find_berry(None, None) if berry != None: if berry.handle==None: berry.open_handle() prefs=bb_prefs.get_prefs() prefs.remove_section(bb_prefs.SECTION_SCANNED_EP) #Note: will replace prefs with sanedd values bb_usb.read_bb_endpoints(berry, None) if self.prefs != None: try: self.prefs.Destroy() except: pass try:
import bb_usb import bb_data import bb_messenging bb_messenging.verbose=True device = bb_usb.find_berry() device.open_handle() device.read_endpoints(0) device.claim_interface() data=[0x48,0x65,0x6c,0x6c,0x6f,0x20,0x77,0x6f,0x72,0x6c,0x64,0x21,0xa] bb_usb.usb_write(device, device.writept, data, 60, "Data -> ") device.release_interface()
def onDevReset(self, event):
berry = bb_usb.find_berry(None, None)
if berry != None:
if berry.handle == None:
berry.open_handle()
bb_usb.reset(berry)
def onCharge(self, event):
berry = bb_usb.find_berry(None, None)
if berry != None:
if berry.handle == None:
berry.open_handle()
bb_usb.set_bb_power(berry)
def start(self, options, args):
bb_messenging.verbose = options.verbose
bb_messenging.veryVerbose = options.veryverbose
if(options.rescan):
prefs=bb_prefs.get_prefs()
prefs.remove_section(bb_prefs.SECTION_SCANNED_EP)
pppConfig = None
if len(args) > 0:
pppConfig = args[0]
# Need to be root (unless udev or OSX)
#if os.getuid() != 0:
# bb_messenging.log("\n!!!!!!!!!!!!!!!!!!!!!\nThis might will only work as root!\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n")
bb_util.remove_berry_charge()
bb_osx.prepare_osx()
berry = None
berry = bb_usb.find_berry(options.device, options.bus)
if berry != None:
# open the connection
if berry.handle==None:
berry.open_handle()
#bb_usbfs.find_kernel_driver(berry)
# lookup endpoints
# IMPORTANT: We need to do this BEFORE RESET, otherwise modem will be screwed
# folowing "test" hello packet (fail on Pearl, ok on storm)
# all right on the Bold the hello packet also causes problem, but reset won't fix it :-(
if not (options.drp and options.dwp and options.mrp and options.mwp):
berry.read_endpoints(options.interface)
if options.listonly:
bb_messenging.warn(["Fin."])
bb_osx.terminate_osx()
os._exit(0)
bb_util.remove_berry_charge()
# set power & reset (only if '-c' requested)
# Only needed with BB os < 4.5 ?
if options.charge:
bb_usb.set_bb_power(berry)
bb_messenging.status("Waiting few seconds, for mode to change")
time.sleep(1.5)
# set to datamode (ony if requested)
if options.dmode:
bb_usb.set_data_mode(berry)
#if options.password != None and len(options.password) > 0:
# bb_usb.set_desktop_mode(berry,options.password)
# overwrite found endpoints with user endpoints if specified
if options.drp:
berry.readpt = int(options.drp, 16)
if options.dwp:
berry.writept = int(options.dwp, 16)
if options.mrp:
berry.modem_readpt = int(options.mrp, 16)
if options.mwp:
berry.modem_writept = int(options.mwp, 16)
if options.interface:
berry.interface = int(options.interface)
if berry.readpt == -1:
bb_messenging.warn(["\nNo good Data Endpoint pair, bailing out !"])
else:
bb_messenging.log("\nUsing Data Endpoint Pair:"+ hex(berry.readpt)+ "/"+ hex(berry.writept))
bb_messenging.log("Using Modem pair: "+ hex(berry.modem_readpt)+ "/"+ hex(berry.modem_writept)+ "\n")
bb_messenging.log("Atachando la interface "+str(berry.interface))
berry.claim_interface()
berry.read_infos()
bb_messenging.log("Pin: "+ hex(berry.pin))
bb_messenging.log("Description: "+ berry.desc)
# Modem use does not require to be in desktop mode, so don't do it.
self.modem = bb_modem.BBModem(berry)
if options.password:
self.modem.set_password(options.password)
pppdCommand = "/usr/sbin/pppd";
if options.pppd:
pppdCommand = options.pppd
# El desktop manager de windows hace esto, pero parce que es innecesario ya que igual funciona
# asi que no lo voy a incluir en el paquete de datos
#bb_usb.usb_write(berry, berry.writept, bb_modem.MODEM_BYPASS_PCKT)
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept, [0,0,0x8,0,0xa,0x6,0,0xa])
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept, [0x6,0,0xa,0,0x40,0,0,0x1,0,0])
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept,[0x6,0,0x16,0,0x40,0x1,0x1,0x2,0,0,0,0xa,0x49,0,0,0,0,0x49,0,0,0,0x1])
#bb_usb.usb_read(berry, berry.readpt)
# This will run forever (until ^C)
try:
self.modem.start(pppConfig, pppdCommand)
except KeyboardInterrupt:
bb_messenging.log("KBD interrupt")
# sometimes the KInterrupt will propagate here(if ^C before modem read thread started)
# we don't want to crash and hang.
if self.modem!=None:
self.modem.do_shutdown()
bb_messenging.status("MSG:Liberando la interfaz")
berry.release_interface()
bb_osx.terminate_osx()
bb_messenging.status("END:LinBerryModem Finalizado")
#os._exit(0)
else:
bb_messenging.warn(["\nERR:No hay BlackBerry Conectado!"])
def start(self, options, args):
bb_messenging.verbose = options.verbose
bb_messenging.veryVerbose = options.veryverbose
if (options.rescan):
prefs = bb_prefs.get_prefs()
prefs.remove_section(bb_prefs.SECTION_SCANNED_EP)
pppConfig = None
if len(args) > 0:
pppConfig = args[0]
# Need to be root (unless udev or OSX)
if os.getuid() != 0:
bb_messenging.log(
"\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\nThis might will only work as root!\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
)
bb_util.remove_berry_charge()
bb_osx.prepare_osx()
berry = None
berry = bb_usb.find_berry(options.device, options.bus)
if berry != None:
# open the connection
if berry.handle == None:
berry.open_handle()
#bb_usbfs.find_kernel_driver(berry)
# lookup endpoints
# IMPORTANT: We need to do this BEFORE RESET, otherwise modem will be screwed
# folowing "test" hello packet (fail on Pearl, ok on storm)
# all right on the Bold the hello packet also causes problem, but reset won't fix it :-(
if not (options.drp and options.dwp and options.mrp
and options.mwp):
berry.read_endpoints(options.interface)
if options.listonly:
bb_messenging.warn(["Listing only requested, stopping here."])
bb_osx.terminate_osx()
os._exit(0)
bb_util.remove_berry_charge()
# set power & reset (only if '-c' requested)
# Only needed with BB os < 4.5 ?
if options.charge:
bb_usb.set_bb_power(berry)
bb_messenging.status("Waiting few seconds, for mode to change")
time.sleep(1.5)
# set to datamode (ony if requested)
if options.dmode:
bb_usb.set_data_mode(berry)
#if options.password != None and len(options.password) > 0:
# bb_usb.set_desktop_mode(berry,options.password)
# overwrite found endpoints with user endpoints if specified
if options.drp:
berry.readpt = int(options.drp, 16)
if options.dwp:
berry.writept = int(options.dwp, 16)
if options.mrp:
berry.modem_readpt = int(options.mrp, 16)
if options.mwp:
berry.modem_writept = int(options.mwp, 16)
if options.interface:
berry.interface = int(options.interface)
if berry.readpt == -1:
bb_messenging.warn(
["\nNo good Data Endpoint pair, bailing out !"])
else:
bb_messenging.log("\nUsing Data Endpoint Pair:" +
hex(berry.readpt) + "/" + hex(berry.writept))
bb_messenging.log("Using Modem pair: " +
hex(berry.modem_readpt) + "/" +
hex(berry.modem_writept) + "\n")
bb_messenging.log("Claiming interface " + str(berry.interface))
berry.claim_interface()
berry.read_infos()
bb_messenging.log("Pin: " + hex(berry.pin))
bb_messenging.log("Description: " + berry.desc)
# Modem use does not require to be in desktop mode, so don't do it.
self.modem = bb_modem.BBModem(berry)
if options.password:
self.modem.set_password(options.password)
pppdCommand = "/usr/sbin/pppd"
if options.pppd:
pppdCommand = options.pppd
# Windows does this, however it does not seem to be required (seem to crash usb at times too)
#bb_usb.usb_write(berry, berry.writept, bb_modem.MODEM_BYPASS_PCKT)
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept, [0,0,0x8,0,0xa,0x6,0,0xa])
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept, [0x6,0,0xa,0,0x40,0,0,0x1,0,0])
#bb_usb.usb_read(berry, berry.readpt)
#bb_usb.usb_write(berry, berry.writept, [0x6,0,0x16,0,0x40,0x1,0x1,0x2,0,0,0,0xa,0x49,0,0,0,0,0x49,0,0,0,0x1])
#bb_usb.usb_read(berry, berry.readpt)
# This will run forever (until ^C)
try:
self.modem.start(pppConfig, pppdCommand)
except KeyboardInterrupt:
bb_messenging.log("KBD interrupt")
# sometimes the KInterrupt will propagate here(if ^C before modem read thread started)
# we don't want to crash and hang.
if self.modem != None:
self.modem.do_shutdown()
bb_messenging.status("Releasing interface")
berry.release_interface()
bb_osx.terminate_osx()
bb_messenging.status("bbtether completed.")
#os._exit(0)
else:
bb_messenging.warn(["\nNo RIM device found"])
