def run(self):
conn = self.frmwk.serial_connection
logger = self.logger
lower_boundary = self.options['LOWER']
upper_boundary = self.options['UPPER']
out_file = open(self.options['FILE'], 'w', 1)
if not self.frmwk.serial_login():
logger.warning(
'meter login failed, some tables may not be accessible')
number_of_tables = 0
self.frmwk.print_status('Starting Dump. Writing table data to: ' +
self.options.get_option_value('FILE'))
for tableid in xrange(lower_boundary, (upper_boundary + 1)):
try:
data = conn.get_table_data(tableid)
except C1218ReadTableError as error:
data = None
if error.errCode == 10: # ISSS
conn.stop()
logger.warning(
'received ISSS error, connection stopped, will sleep before retrying'
)
sleep(0.5)
if not self.frmwk.serial_login():
logger.warning(
'meter login failed, some tables may not be accessible'
)
try:
data = conn.get_table_data(tableid)
except C1218ReadTableError as error:
data = None
if error.errCode == 10:
raise error # tried to re-sync communications but failed, you should reconnect and rerun the module
if data:
self.frmwk.print_status(
'Found readable table, ID: ' + str(tableid) + ' Name: ' +
(C1219_TABLES.get(tableid) or 'UNKNOWN'))
# format is: table id, table name, table data length, table data
out_file.write(','.join([
str(tableid), (C1219_TABLES.get(tableid) or 'UNKNOWN'),
str(len(data)),
data.encode('hex')
]) + os.linesep)
number_of_tables += 1
out_file.close()
self.frmwk.print_status('Successfully copied ' +
str(number_of_tables) + ' tables to disk.')
return
def run(self):
conn = self.frmwk.serial_connection
logger = self.logger
lower_boundary = self.options['LOWER']
upper_boundary = self.options['UPPER']
number_of_tables = 0
self.frmwk.print_status('Enumerating tables, please wait...')
for table_id in range(lower_boundary, (upper_boundary + 1)):
try:
conn.get_table_data(table_id)
except C1218ReadTableError:
self.frmwk.serial_disconnect()
logger.warning(
'received ISSS error, connection stopped, will sleep before retrying'
)
sleep(0.5)
self.frmwk.serial_connect()
if not self.frmwk.serial_login():
logger.warning(
'meter login failed, some tables may not be accessible'
)
conn = self.frmwk.serial_connection
else:
self.frmwk.print_status(
'Found readable table, ID: ' + str(table_id) + ' Name: ' +
(C1219_TABLES.get(table_id) or 'UNKNOWN'))
number_of_tables += 1
self.frmwk.print_status("Found {0:,} tables in range {1}-{2}.".format(
number_of_tables, lower_boundary, upper_boundary))
def run(self):
conn = self.frmwk.serial_connection
logger = self.logger
lower_boundary = self.options['LOWER']
upper_boundary = self.options['UPPER']
if not self.frmwk.serial_login():
logger.warning('meter login failed')
self.frmwk.print_status('Enumerating tables, please wait...')
tables_found = 0
for tableid in xrange(lower_boundary, (upper_boundary + 1)):
data = self.get_table_data_ex(conn, tableid, 4)
if data[0] == '\x00':
self.frmwk.print_status(
'Found readable table, ID: ' + str(tableid) + ' Name: ' +
(C1219_TABLES.get(tableid) or 'UNKNOWN'))
tables_found += 1
else:
error_code = ord(data[0])
error_type = str(
C1218_RESPONSE_CODES.get(error_code) or 'UNKNOWN')
logger.info('received error code: ' + str(error_code) +
' type: ' + error_type)
while not conn.stop():
sleep(0.5)
sleep(0.25)
while not conn.start():
sleep(0.5)
sleep(0.25)
while not conn.login():
sleep(0.5)
sleep(0.25)
self.frmwk.print_status('Found ' + str(tables_found) + ' table(s).')
return
def run(self, frmwk, args):
lower_boundary = self.options['LOWER']
upper_boundary = self.options['UPPER']
logger = frmwk.get_module_logger(self.name)
if not frmwk.serial_login():
logger.warning('meter login failed')
conn = frmwk.serial_connection
frmwk.print_status('Enumerating tables, please wait...')
tables_found = 0
for tableid in xrange(lower_boundary, (upper_boundary + 1)):
data = self.getTableDataEx(conn, tableid, 4)
if data[0] == '\x00':
frmwk.print_status('Found readable table, ID: ' + str(tableid) + ' Name: ' + (C1219_TABLES.get(tableid) or 'UNKNOWN'))
tables_found += 1
else:
logger.info('received nak/error code: ' + str(ord(data[0])))
while not conn.stop():
sleep(0.5)
sleep(0.25)
while not conn.start():
sleep(0.5)
sleep(0.25)
while not conn.login():
sleep(0.5)
sleep(0.25)
frmwk.print_status('Found ' + str(tables_found) + ' table(s).')
return
def run(self, frmwk, args):
lower_boundary = self.options['LOWER']
upper_boundary = self.options['UPPER']
out_file = open(self.options['FILE'], 'w', 1)
logger = frmwk.get_module_logger(self.name)
if not frmwk.serial_login():
logger.warning('meter login failed, some tables may not be accessible')
conn = frmwk.serial_connection
number_of_tables = 0
frmwk.print_status('Starting Dump. Writing table data to: ' + self.options.getOptionValue('FILE'))
for tableid in xrange(lower_boundary, (upper_boundary + 1)):
try:
data = conn.getTableData(tableid)
except C1218ReadTableError as error:
data = None
if error.errCode == 10: # ISSS
conn.stop()
logger.warning('received ISSS error, connection stopped, will sleep before retrying')
sleep(0.5)
if not frmwk.serial_login():
logger.warning('meter login failed, some tables may not be accessible')
try:
data = conn.getTableData(tableid)
except C1218ReadTableError as error:
data = None
if error.errCode == 10:
raise error # tried to re-sync communications but failed, you should reconnect and rerun the module
if data:
frmwk.print_status('Found readable table, ID: ' + str(tableid) + ' Name: ' + (C1219_TABLES.get(tableid) or 'UNKNOWN'))
# format is: table id, table name, table data length, table data
out_file.write(','.join([str(tableid), (C1219_TABLES.get(tableid) or 'UNKNOWN'), str(len(data)), data.encode('hex')]) + os.linesep)
number_of_tables += 1
out_file.close()
frmwk.print_status('Successfully copied ' + str(number_of_tables) + ' tables to disk.')
return
def run(self):
conn = self.frmwk.serial_connection
logger = self.logger
lower_boundary = self.options['LOWER']
upper_boundary = self.options['UPPER']
if not self.frmwk.serial_login():
logger.warning('meter login failed')
number_of_tables = 0
self.frmwk.print_status('Enumerating tables, please wait...')
for tableid in xrange(lower_boundary, (upper_boundary + 1)):
try:
data = conn.get_table_data(tableid)
except C1218ReadTableError as error:
data = None
if error.errCode == 10: # ISSS
conn.stop()
logger.warning(
'received ISSS error, connection stopped, will sleep before retrying'
)
sleep(0.5)
if not self.frmwk.serial_login():
logger.warning(
'meter login failed, some tables may not be accessible'
)
try:
data = conn.get_table_data(tableid)
except C1218ReadTableError as error:
data = None
if error.errCode == 10:
raise error # tried to re-sync communications but failed, you should reconnect and rerun the module
if data:
self.frmwk.print_status(
'Found readable table, ID: ' + str(tableid) + ' Name: ' +
(C1219_TABLES.get(tableid) or 'UNKNOWN'))
number_of_tables += 1
self.frmwk.print_status('Found ' + str(number_of_tables) +
' table(s).')
return
def run(self):
conn = self.frmwk.serial_connection
logger = self.logger
lower_boundary = self.options['LOWER']
upper_boundary = self.options['UPPER']
out_file = open(self.options['FILE'], 'w', 1)
number_of_tables = 0
self.frmwk.print_status('Starting dump, writing table data to: ' + self.options['FILE'])
for tableid in range(lower_boundary, (upper_boundary + 1)):
try:
data = conn.get_table_data(tableid)
except C1218ReadTableError as error:
data = None
if error.code == 10: # ISSS
conn.stop()
logger.warning('received ISSS error, connection stopped, will sleep before retrying')
time.sleep(0.5)
if not self.frmwk.serial_login():
logger.warning('meter login failed, some tables may not be accessible')
try:
data = conn.get_table_data(tableid)
except C1218ReadTableError as error:
data = None
if error.code == 10:
raise error # tried to re-sync communications but failed, you should reconnect and rerun the module
if not data:
continue
tablename = C1219_TABLES.get(tableid, 'UNKNOWN')
tableid = str(tableid)
self.frmwk.print_status('Found readable table, ID: ' + tableid + ' Name: ' + tablename)
# format is: table id, table name, table data length, table data
out_file.write(','.join([tableid, tablename, str(len(data)), binascii.b2a_hex(data).decode('utf-8')]) + os.linesep)
number_of_tables += 1
out_file.close()
self.frmwk.print_status('Successfully copied ' + str(number_of_tables) + ' tables to disk.')
def run(self):
conn = self.frmwk.serial_connection
logger = self.logger
lower_boundary = self.options['LOWER']
upper_boundary = self.options['UPPER']
number_of_tables = 0
self.frmwk.print_status('Enumerating tables, please wait...')
for table_id in range(lower_boundary, (upper_boundary + 1)):
try:
conn.get_table_data(table_id)
except C1218ReadTableError:
self.frmwk.serial_disconnect()
logger.warning('received ISSS error, connection stopped, will sleep before retrying')
sleep(0.5)
self.frmwk.serial_connect()
if not self.frmwk.serial_login():
logger.warning('meter login failed, some tables may not be accessible')
conn = self.frmwk.serial_connection
else:
self.frmwk.print_status('Found readable table, ID: ' + str(table_id) + ' Name: ' + (C1219_TABLES.get(table_id) or 'UNKNOWN'))
number_of_tables += 1
self.frmwk.print_status("Found {0:,} tables in range {1}-{2}.".format(number_of_tables, lower_boundary, upper_boundary))
def run(self):
conn = self.frmwk.serial_connection
logger = self.logger
lower_boundary = self.options['LOWER']
upper_boundary = self.options['UPPER']
if not self.frmwk.serial_login():
logger.warning('meter login failed')
number_of_tables = 0
self.frmwk.print_status('Enumerating tables, please wait...')
for tableid in xrange(lower_boundary, (upper_boundary + 1)):
try:
data = conn.get_table_data(tableid)
except C1218ReadTableError as error:
data = None
if error.errCode == 10: # ISSS
conn.stop()
logger.warning('received ISSS error, connection stopped, will sleep before retrying')
sleep(0.5)
if not self.frmwk.serial_login():
logger.warning('meter login failed, some tables may not be accessible')
try:
data = conn.get_table_data(tableid)
except C1218ReadTableError as error:
data = None
if error.errCode == 10:
raise error # tried to re-sync communications but failed, you should reconnect and rerun the module
if data:
self.frmwk.print_status('Found readable table, ID: ' + str(tableid) + ' Name: ' + (C1219_TABLES.get(tableid) or 'UNKNOWN'))
number_of_tables += 1
self.frmwk.print_status('Found ' + str(number_of_tables) + ' table(s).')
return
def run(self):
conn = self.frmwk.serial_connection
logger = self.logger
lower_boundary = self.options['LOWER']
upper_boundary = self.options['UPPER']
if not self.frmwk.serial_login():
logger.warning('meter login failed')
self.frmwk.print_status('Enumerating tables, please wait...')
tables_found = 0
for tableid in xrange(lower_boundary, (upper_boundary + 1)):
data = self.get_table_data_ex(conn, tableid, 4)
if data[0] == '\x00':
self.frmwk.print_status('Found readable table, ID: ' + str(tableid) + ' Name: ' + (C1219_TABLES.get(tableid) or 'UNKNOWN'))
tables_found += 1
else:
error_code = ord(data[0])
error_type = str(C1218_RESPONSE_CODES.get(error_code) or 'UNKNOWN')
logger.info('received error code: ' + str(error_code) + ' type: ' + error_type)
while not conn.stop():
sleep(0.5)
sleep(0.25)
while not conn.start():
sleep(0.5)
sleep(0.25)
while not conn.login():
sleep(0.5)
sleep(0.25)
self.frmwk.print_status('Found ' + str(tables_found) + ' table(s).')
return