confusion_row1 = Qty(value=val1, min_val=min_val, max_val=max_val, unit="")
confusion_row2 = Qty(value=val2, min_val=min_val, max_val=max_val, unit="")
conf_matrix = tasks.ConfusionMatrix(Q1=confusion_row1, Q2=confusion_row2)
init_temp = 50e-3
init_ground = tasks.InitialiseGround(
init_temp=Qty(value=init_temp, min_val=-0.001, max_val=0.22, unit="K")
)
model = Mdl(
[q1, q2], # Individual, self-contained components
[drive, drive2, q1q2], # Interactions between components
[conf_matrix, init_ground], # SPAM processing
)
model.set_lindbladian(False)
model.set_dressed(True)
sim_res = 100e9 # Resolution for numerical simulation
awg_res = 2e9 # Realistic, limited resolution of an AWG
generator = Gnr(
devices={
"LO": devices.LO(name="lo", resolution=sim_res, outputs=1),
"AWG": devices.AWG(name="awg", resolution=awg_res, outputs=1),
"DigitalToAnalog": devices.DigitalToAnalog(
name="dac", resolution=sim_res, inputs=1, outputs=1
),
"Response": devices.Response(
name="resp",
rise_time=Qty(value=0.3e-9, min_val=0.05e-9, max_val=0.6e-9, unit="s"),
desc="Drive on Q1",
connected=["Q1"],
hamiltonian_func=hamiltonians.x_drive)
drive_q2 = chip.Drive(name="Q2",
desc="Drive on Q2",
connected=["Q2"],
hamiltonian_func=hamiltonians.x_drive)
flux = chip.Drive(name="TC",
desc="Flux drive/control on tunable couler",
connected=["TC"],
hamiltonian_func=hamiltonians.z_drive)
phys_components = [tc_at, q1, q2]
line_components = [flux, q1tc, q2tc, q1q2, drive_q1, drive_q2]
model = Mdl(phys_components, line_components, [])
model.set_lindbladian(lindblad)
model.set_dressed(dressed)
# ### MAKE GENERATOR
lo = devices.LO(name='lo', resolution=sim_res)
awg = devices.AWG(name='awg', resolution=awg_res)
dig_to_an = devices.DigitalToAnalog(name="dac", resolution=sim_res)
resp = devices.Response(name='resp',
rise_time=Qty(value=0.3e-9,
min_val=0.05e-9,
max_val=0.6e-9,
unit='s'),
resolution=sim_res)
mixer = devices.Mixer(name='mixer')
fluxbias = devices.FluxTuning(name='fluxbias',
phi_0=Qty(value=phi_0_tc,
def create_experiment():
lindblad = False
dressed = True
qubit_lvls = 3
freq_q1 = 5e9 * 2 * np.pi
freq_q2 = 5.6e9 * 2 * np.pi
anhar_q1 = -210e6 * 2 * np.pi
anhar_q2 = -240e6 * 2 * np.pi
coupling_strength = 20e6 * 2 * np.pi
t1_q1 = 27e-6
t1_q2 = 23e-6
t2star_q1 = 39e-6
t2star_q2 = 31e-6
init_temp = 0
qubit_temp = 0
t_final = 7e-9 # Time for single qubit gates
sim_res = 100e9
awg_res = 2e9
sideband = 50e6 * 2 * np.pi
lo_freq_q1 = 5e9 * 2 * np.pi + sideband
lo_freq_q2 = 5.6e9 * 2 * np.pi + sideband
# ### MAKE MODEL
q1 = chip.Qubit(
name="Q1",
desc="Qubit 1",
freq=Qty(
value=freq_q1,
min_val=4.995e9 * 2 * np.pi,
max_val=5.005e9 * 2 * np.pi,
unit="Hz 2pi",
),
anhar=Qty(
value=anhar_q1,
min_val=-380e6 * 2 * np.pi,
max_val=-120e6 * 2 * np.pi,
unit="Hz 2pi",
),
hilbert_dim=qubit_lvls,
t1=Qty(value=t1_q1, min_val=1e-6, max_val=90e-6, unit="s"),
t2star=Qty(value=t2star_q1, min_val=10e-6, max_val=90e-6, unit="s"),
temp=Qty(value=qubit_temp, min_val=0.0, max_val=0.12, unit="K"),
)
q2 = chip.Qubit(
name="Q2",
desc="Qubit 2",
freq=Qty(
value=freq_q2,
min_val=5.595e9 * 2 * np.pi,
max_val=5.605e9 * 2 * np.pi,
unit="Hz 2pi",
),
anhar=Qty(
value=anhar_q2,
min_val=-380e6 * 2 * np.pi,
max_val=-120e6 * 2 * np.pi,
unit="Hz 2pi",
),
hilbert_dim=qubit_lvls,
t1=Qty(value=t1_q2, min_val=1e-6, max_val=90e-6, unit="s"),
t2star=Qty(value=t2star_q2, min_val=10e-6, max_val=90e-6, unit="s"),
temp=Qty(value=qubit_temp, min_val=0.0, max_val=0.12, unit="K"),
)
q1q2 = chip.Coupling(
name="Q1-Q2",
desc="coupling",
comment="Coupling qubit 1 to qubit 2",
connected=["Q1", "Q2"],
strength=Qty(
value=coupling_strength,
min_val=-1 * 1e3 * 2 * np.pi,
max_val=200e6 * 2 * np.pi,
unit="Hz 2pi",
),
hamiltonian_func=hamiltonians.int_XX,
)
drive = chip.Drive(
name="d1",
desc="Drive 1",
comment="Drive line 1 on qubit 1",
connected=["Q1"],
hamiltonian_func=hamiltonians.x_drive,
)
drive2 = chip.Drive(
name="d2",
desc="Drive 2",
comment="Drive line 2 on qubit 2",
connected=["Q2"],
hamiltonian_func=hamiltonians.x_drive,
)
phys_components = [q1, q2]
line_components = [drive, drive2, q1q2]
init_ground = tasks.InitialiseGround(
init_temp=Qty(value=init_temp, min_val=-0.001, max_val=0.22, unit="K"))
task_list = [init_ground]
model = Mdl(phys_components, line_components, task_list)
model.set_lindbladian(lindblad)
model.set_dressed(dressed)
# ### MAKE GENERATOR
generator = Gnr(
devices={
"LO":
devices.LO(name="lo", resolution=sim_res, outputs=1),
"AWG":
devices.AWG(name="awg", resolution=awg_res, outputs=1),
"DigitalToAnalog":
devices.DigitalToAnalog(name="dac",
resolution=sim_res,
inputs=1,
outputs=1),
"Response":
devices.Response(
name="resp",
rise_time=Qty(value=0.3e-9,
min_val=0.05e-9,
max_val=0.6e-9,
unit="s"),
resolution=sim_res,
inputs=1,
outputs=1,
),
"Mixer":
devices.Mixer(name="mixer", inputs=2, outputs=1),
"VoltsToHertz":
devices.VoltsToHertz(
name="v_to_hz",
V_to_Hz=Qty(value=1e9,
min_val=0.9e9,
max_val=1.1e9,
unit="Hz/V"),
inputs=1,
outputs=1,
),
},
chains={
"d1": [
"LO", "AWG", "DigitalToAnalog", "Response", "Mixer",
"VoltsToHertz"
],
"d2": [
"LO", "AWG", "DigitalToAnalog", "Response", "Mixer",
"VoltsToHertz"
],
},
)
generator.devices["awg"].enable_drag_2()
# ### MAKE GATESET
gateset = gates.GateSet()
gauss_params_single = {
"amp":
Qty(value=0.45, min_val=0.4, max_val=0.6, unit="V"),
"t_final":
Qty(value=t_final,
min_val=0.5 * t_final,
max_val=1.5 * t_final,
unit="s"),
"sigma":
Qty(value=t_final / 4,
min_val=t_final / 8,
max_val=t_final / 2,
unit="s"),
"xy_angle":
Qty(value=0.0, min_val=-0.5 * np.pi, max_val=2.5 * np.pi, unit="rad"),
"freq_offset":
Qty(
value=-sideband - 0.5e6 * 2 * np.pi,
min_val=-53 * 1e6 * 2 * np.pi,
max_val=-47 * 1e6 * 2 * np.pi,
unit="Hz 2pi",
),
"delta":
Qty(value=-1, min_val=-5, max_val=3, unit=""),
}
gauss_env_single = pulse.Envelope(
name="gauss",
desc="Gaussian comp for single-qubit gates",
params=gauss_params_single,
shape=envelopes.gaussian_nonorm,
)
nodrive_env = pulse.Envelope(
name="no_drive",
params={
"t_final":
Qty(value=t_final,
min_val=0.5 * t_final,
max_val=1.5 * t_final,
unit="s")
},
shape=envelopes.no_drive,
)
carrier_parameters = {
"freq":
Qty(
value=lo_freq_q1,
min_val=4.5e9 * 2 * np.pi,
max_val=6e9 * 2 * np.pi,
unit="Hz 2pi",
),
"framechange":
Qty(value=0.0, min_val=-np.pi, max_val=3 * np.pi, unit="rad"),
}
carr = pulse.Carrier(
name="carrier",
desc="Frequency of the local oscillator",
params=carrier_parameters,
)
carr_2 = copy.deepcopy(carr)
carr_2.params["freq"].set_value(lo_freq_q2)
RX90p_q1 = gates.Instruction(name="RX90p",
t_start=0.0,
t_end=t_final,
channels=["d1"])
RX90p_q2 = gates.Instruction(name="RX90p",
t_start=0.0,
t_end=t_final,
channels=["d2"])
QId_q1 = gates.Instruction(name="Id",
t_start=0.0,
t_end=t_final,
channels=["d1"])
QId_q2 = gates.Instruction(name="Id",
t_start=0.0,
t_end=t_final,
channels=["d2"])
RX90p_q1.add_component(gauss_env_single, "d1")
RX90p_q1.add_component(carr, "d1")
QId_q1.add_component(nodrive_env, "d1")
QId_q1.add_component(copy.deepcopy(carr), "d1")
QId_q1.comps["d1"]["carrier"].params["framechange"].set_value(
(-sideband * t_final) % (2 * np.pi))
Y90p_q1 = copy.deepcopy(RX90p_q1)
Y90p_q1.name = "RY90p"
X90m_q1 = copy.deepcopy(RX90p_q1)
X90m_q1.name = "RX90m"
Y90m_q1 = copy.deepcopy(RX90p_q1)
Y90m_q1.name = "RY90m"
Y90p_q1.comps["d1"]["gauss"].params["xy_angle"].set_value(0.5 * np.pi)
X90m_q1.comps["d1"]["gauss"].params["xy_angle"].set_value(np.pi)
Y90m_q1.comps["d1"]["gauss"].params["xy_angle"].set_value(1.5 * np.pi)
Q1_gates = [QId_q1, RX90p_q1, Y90p_q1, X90m_q1, Y90m_q1]
RX90p_q2.add_component(copy.deepcopy(gauss_env_single), "d2")
RX90p_q2.add_component(carr_2, "d2")
QId_q2.add_component(copy.deepcopy(nodrive_env), "d2")
QId_q2.add_component(copy.deepcopy(carr_2), "d2")
QId_q2.comps["d2"]["carrier"].params["framechange"].set_value(
(-sideband * t_final) % (2 * np.pi))
Y90p_q2 = copy.deepcopy(RX90p_q2)
Y90p_q2.name = "RY90p"
X90m_q2 = copy.deepcopy(RX90p_q2)
X90m_q2.name = "RX90m"
Y90m_q2 = copy.deepcopy(RX90p_q2)
Y90m_q2.name = "RY90m"
Y90p_q2.comps["d2"]["gauss"].params["xy_angle"].set_value(0.5 * np.pi)
X90m_q2.comps["d2"]["gauss"].params["xy_angle"].set_value(np.pi)
Y90m_q2.comps["d2"]["gauss"].params["xy_angle"].set_value(1.5 * np.pi)
Q2_gates = [QId_q2, RX90p_q2, Y90p_q2, X90m_q2, Y90m_q2]
all_1q_gates_comb = []
for g1 in Q1_gates:
for g2 in Q2_gates:
g = gates.Instruction(name="NONE",
t_start=0.0,
t_end=t_final,
channels=[])
g.name = g1.name + ":" + g2.name
channels = []
channels.extend(g1.comps.keys())
channels.extend(g2.comps.keys())
for chan in channels:
g.comps[chan] = {}
if chan in g1.comps:
g.comps[chan].update(g1.comps[chan])
if chan in g2.comps:
g.comps[chan].update(g2.comps[chan])
all_1q_gates_comb.append(g)
for gate in all_1q_gates_comb:
gateset.add_instruction(gate)
# ### MAKE EXPERIMENT
exp = Exp(model=model, generator=generator, gateset=gateset)
return exp
def make_exp(simtime: np.float64 = 7e-9) -> Exp:
"""
Parameters
----------
simtime : np.float64
"""
qubit_lvls = 3
freq_q1 = 5e9
anhar_q1 = -210e6
t1_q1 = 27e-6
t2star_q1 = 39e-6
qubit_temp = 50e-3
q1 = chip.Qubit(
name="Q1",
desc="Qubit 1",
freq=Qty(value=freq_q1,
min_val=4.995e9,
max_val=5.005e9,
unit="Hz 2pi"),
anhar=Qty(value=anhar_q1,
min_val=-380e6,
max_val=-120e6,
unit="Hz 2pi"),
hilbert_dim=qubit_lvls,
t1=Qty(value=t1_q1, min_val=1e-6, max_val=90e-6, unit="s"),
t2star=Qty(value=t2star_q1, min_val=10e-6, max_val=90e-3, unit="s"),
temp=Qty(value=qubit_temp, min_val=0.0, max_val=0.12, unit="K"),
)
freq_q2 = 5.6e9
anhar_q2 = -240e6
t1_q2 = 23e-6
t2star_q2 = 31e-6
q2 = chip.Qubit(
name="Q2",
desc="Qubit 2",
freq=Qty(value=freq_q2,
min_val=5.595e9,
max_val=5.605e9,
unit="Hz 2pi"),
anhar=Qty(value=anhar_q2,
min_val=-380e6,
max_val=-120e6,
unit="Hz 2pi"),
hilbert_dim=qubit_lvls,
t1=Qty(value=t1_q2, min_val=1e-6, max_val=90e-6, unit="s"),
t2star=Qty(value=t2star_q2, min_val=10e-6, max_val=90e-6, unit="s"),
temp=Qty(value=qubit_temp, min_val=0.0, max_val=0.12, unit="K"),
)
coupling_strength = 20e6
q1q2 = chip.Coupling(
name="Q1-Q2",
desc="coupling",
comment="Coupling qubit 1 to qubit 2",
connected=["Q1", "Q2"],
strength=Qty(value=coupling_strength,
min_val=-1 * 1e3,
max_val=200e6,
unit="Hz 2pi"),
hamiltonian_func=hamiltonians.int_XX,
)
drive = chip.Drive(
name="d1",
desc="Drive 1",
comment="Drive line 1 on qubit 1",
connected=["Q1"],
hamiltonian_func=hamiltonians.x_drive,
)
drive2 = chip.Drive(
name="d2",
desc="Drive 2",
comment="Drive line 2 on qubit 2",
connected=["Q2"],
hamiltonian_func=hamiltonians.x_drive,
)
m00_q1 = 0.97 # Prop to read qubit 1 state 0 as 0
m01_q1 = 0.04 # Prop to read qubit 1 state 0 as 1
m00_q2 = 0.96 # Prop to read qubit 2 state 0 as 0
m01_q2 = 0.05 # Prop to read qubit 2 state 0 as 1
one_zeros = np.array([0] * qubit_lvls)
zero_ones = np.array([1] * qubit_lvls)
one_zeros[0] = 1
zero_ones[0] = 0
val1 = one_zeros * m00_q1 + zero_ones * m01_q1
val2 = one_zeros * m00_q2 + zero_ones * m01_q2
min_val = one_zeros * 0.8 + zero_ones * 0.0
max_val = one_zeros * 1.0 + zero_ones * 0.2
confusion_row1 = Qty(value=val1, min_val=min_val, max_val=max_val, unit="")
confusion_row2 = Qty(value=val2, min_val=min_val, max_val=max_val, unit="")
conf_matrix = tasks.ConfusionMatrix(Q1=confusion_row1, Q2=confusion_row2)
init_temp = 50e-3
init_ground = tasks.InitialiseGround(
init_temp=Qty(value=init_temp, min_val=-0.001, max_val=0.22, unit="K"))
model = Mdl(
[q1, q2], # Individual, self-contained components
[drive, drive2, q1q2], # Interactions between components
[conf_matrix, init_ground], # SPAM processing
)
model.set_lindbladian(False)
model.set_dressed(True)
sim_res = 100e9 # Resolution for numerical simulation
awg_res = 2e9 # Realistic, limited resolution of an AWG
generator = Gnr(
devices={
"LO":
devices.LO(name="lo", resolution=sim_res, outputs=1),
"AWG":
devices.AWG(name="awg", resolution=awg_res, outputs=1),
"DigitalToAnalog":
devices.DigitalToAnalog(name="dac",
resolution=sim_res,
inputs=1,
outputs=1),
"Response":
devices.Response(
name="resp",
rise_time=Qty(value=0.3e-9,
min_val=0.05e-9,
max_val=0.6e-9,
unit="s"),
resolution=sim_res,
inputs=1,
outputs=1,
),
"Mixer":
devices.Mixer(name="mixer", inputs=2, outputs=1),
"VoltsToHertz":
devices.VoltsToHertz(
name="v_to_hz",
V_to_Hz=Qty(value=1e9,
min_val=0.9e9,
max_val=1.1e9,
unit="Hz/V"),
inputs=1,
outputs=1,
),
},
chains={
"d1": [
"LO", "AWG", "DigitalToAnalog", "Response", "Mixer",
"VoltsToHertz"
],
"d2": [
"LO", "AWG", "DigitalToAnalog", "Response", "Mixer",
"VoltsToHertz"
],
},
)
t_final = simtime # Time for single qubit gates
sideband = 50e6
gauss_params_single = {
"amp":
Qty(value=0.5, min_val=0.4, max_val=0.6, unit="V"),
"t_final":
Qty(value=t_final,
min_val=0.5 * t_final,
max_val=1.5 * t_final,
unit="s"),
"sigma":
Qty(value=t_final / 4,
min_val=t_final / 8,
max_val=t_final / 2,
unit="s"),
"xy_angle":
Qty(value=0.0, min_val=-0.5 * np.pi, max_val=2.5 * np.pi, unit="rad"),
"freq_offset":
Qty(value=-sideband - 3e6,
min_val=-56 * 1e6,
max_val=-52 * 1e6,
unit="Hz 2pi"),
"delta":
Qty(value=-1, min_val=-5, max_val=3, unit=""),
}
gauss_env_single = pulse.Envelope(
name="gauss",
desc="Gaussian comp for single-qubit gates",
params=gauss_params_single,
shape=envelopes.gaussian_nonorm,
)
lo_freq_q1 = 5e9 + sideband
carrier_parameters = {
"freq":
Qty(value=lo_freq_q1, min_val=4.5e9, max_val=6e9, unit="Hz 2pi"),
"framechange":
Qty(value=0.0, min_val=-np.pi, max_val=3 * np.pi, unit="rad"),
}
nodrive_env = pulse.Envelope(
name="no_drive",
params={
"t_final":
Qty(value=t_final,
min_val=0.5 * t_final,
max_val=1.5 * t_final,
unit="s")
},
shape=envelopes.no_drive,
)
lo_freq_q1 = 5e9 + sideband
carrier_parameters = {
"freq":
Qty(value=lo_freq_q1, min_val=4.5e9, max_val=6e9, unit="Hz 2pi"),
"framechange":
Qty(value=0.0, min_val=-np.pi, max_val=3 * np.pi, unit="rad"),
}
carr = pulse.Carrier(name="carrier",
desc="Frequency of the local oscillator",
params=carrier_parameters)
lo_freq_q2 = 5.6e9 + sideband
carr_2 = copy.deepcopy(carr)
carr_2.params["freq"].set_value(lo_freq_q2)
X90p_q1 = gates.Instruction(name="X90p",
channels=["d1"],
t_start=0.0,
t_end=t_final)
X90p_q2 = gates.Instruction(name="X90p",
channels=["d2"],
t_start=0.0,
t_end=t_final)
QId_q1 = gates.Instruction(name="Id",
channels=["d1"],
t_start=0.0,
t_end=t_final)
QId_q2 = gates.Instruction(name="Id",
channels=["d2"],
t_start=0.0,
t_end=t_final)
X90p_q1.add_component(gauss_env_single, "d1")
X90p_q1.add_component(carr, "d1")
QId_q1.add_component(nodrive_env, "d1")
QId_q1.add_component(copy.deepcopy(carr), "d1")
X90p_q2.add_component(copy.deepcopy(gauss_env_single), "d2")
X90p_q2.add_component(carr_2, "d2")
QId_q2.add_component(copy.deepcopy(nodrive_env), "d2")
QId_q2.add_component(copy.deepcopy(carr_2), "d2")
QId_q1.comps["d1"]["carrier"].params["framechange"].set_value(
(-sideband * t_final) * 2 * np.pi % (2 * np.pi))
QId_q2.comps["d2"]["carrier"].params["framechange"].set_value(
(-sideband * t_final) * 2 * np.pi % (2 * np.pi))
Y90p_q1 = copy.deepcopy(X90p_q1)
Y90p_q1.name = "Y90p"
X90m_q1 = copy.deepcopy(X90p_q1)
X90m_q1.name = "X90m"
Y90m_q1 = copy.deepcopy(X90p_q1)
Y90m_q1.name = "Y90m"
Y90p_q1.comps["d1"]["gauss"].params["xy_angle"].set_value(0.5 * np.pi)
X90m_q1.comps["d1"]["gauss"].params["xy_angle"].set_value(np.pi)
Y90m_q1.comps["d1"]["gauss"].params["xy_angle"].set_value(1.5 * np.pi)
Q1_gates = [QId_q1, X90p_q1, Y90p_q1, X90m_q1, Y90m_q1]
Y90p_q2 = copy.deepcopy(X90p_q2)
Y90p_q2.name = "Y90p"
X90m_q2 = copy.deepcopy(X90p_q2)
X90m_q2.name = "X90m"
Y90m_q2 = copy.deepcopy(X90p_q2)
Y90m_q2.name = "Y90m"
Y90p_q2.comps["d2"]["gauss"].params["xy_angle"].set_value(0.5 * np.pi)
X90m_q2.comps["d2"]["gauss"].params["xy_angle"].set_value(np.pi)
Y90m_q2.comps["d2"]["gauss"].params["xy_angle"].set_value(1.5 * np.pi)
Q2_gates = [QId_q2, X90p_q2, Y90p_q2, X90m_q2, Y90m_q2]
all_1q_gates_comb = []
for g1 in Q1_gates:
for g2 in Q2_gates:
g = gates.Instruction(name="NONE",
channels=[],
t_start=0.0,
t_end=t_final)
g.name = g1.name + ":" + g2.name
channels: List[str] = []
channels.extend(g1.comps.keys())
channels.extend(g2.comps.keys())
for chan in channels:
g.comps[chan] = {}
if chan in g1.comps:
g.comps[chan].update(g1.comps[chan])
if chan in g2.comps:
g.comps[chan].update(g2.comps[chan])
all_1q_gates_comb.append(g)
pmap = PMap(all_1q_gates_comb, generator, model)
return Exp(pmap)
def create_experiment():
lindblad = False
dressed = True
qubit_lvls = 3
freq_q1 = 5e9 * 2 * np.pi
freq_q2 = 5.6e9 * 2 * np.pi
anhar_q1 = -210e6 * 2 * np.pi
anhar_q2 = -240e6 * 2 * np.pi
coupling_strength = 20e6 * 2 * np.pi
t1_q1 = 27e-6
t1_q2 = 23e-6
t2star_q1 = 39e-6
t2star_q2 = 31e-6
init_temp = 0
qubit_temp = 0
v2hz = 1e9
t_final = 7e-9 # Time for single qubit gates
sim_res = 100e9
awg_res = 2e9
meas_offset = 0.0
meas_scale = 1.0
sideband = 50e6 * 2 * np.pi
lo_freq_q1 = 5e9 * 2 * np.pi + sideband
lo_freq_q2 = 5.6e9 * 2 * np.pi + sideband
# ### MAKE MODEL
q1 = chip.Qubit(name="Q1",
desc="Qubit 1",
freq=Qty(value=freq_q1,
min=4.995e9 * 2 * np.pi,
max=5.005e9 * 2 * np.pi,
unit='Hz 2pi'),
anhar=Qty(value=anhar_q1,
min=-380e6 * 2 * np.pi,
max=-120e6 * 2 * np.pi,
unit='Hz 2pi'),
hilbert_dim=qubit_lvls,
t1=Qty(value=t1_q1, min=1e-6, max=90e-6, unit='s'),
t2star=Qty(value=t2star_q1, min=10e-6, max=90e-6,
unit='s'),
temp=Qty(value=qubit_temp, min=0.0, max=0.12, unit='K'))
q2 = chip.Qubit(name="Q2",
desc="Qubit 2",
freq=Qty(value=freq_q2,
min=5.595e9 * 2 * np.pi,
max=5.605e9 * 2 * np.pi,
unit='Hz 2pi'),
anhar=Qty(value=anhar_q2,
min=-380e6 * 2 * np.pi,
max=-120e6 * 2 * np.pi,
unit='Hz 2pi'),
hilbert_dim=qubit_lvls,
t1=Qty(value=t1_q2, min=1e-6, max=90e-6, unit='s'),
t2star=Qty(value=t2star_q2, min=10e-6, max=90e-6,
unit='s'),
temp=Qty(value=qubit_temp, min=0.0, max=0.12, unit='K'))
q1q2 = chip.Coupling(name="Q1-Q2",
desc="coupling",
comment="Coupling qubit 1 to qubit 2",
connected=["Q1", "Q2"],
strength=Qty(value=coupling_strength,
min=-1 * 1e3 * 2 * np.pi,
max=200e6 * 2 * np.pi,
unit='Hz 2pi'),
hamiltonian_func=hamiltonians.int_XX)
drive = chip.Drive(name="d1",
desc="Drive 1",
comment="Drive line 1 on qubit 1",
connected=["Q1"],
hamiltonian_func=hamiltonians.x_drive)
drive2 = chip.Drive(name="d2",
desc="Drive 2",
comment="Drive line 2 on qubit 2",
connected=["Q2"],
hamiltonian_func=hamiltonians.x_drive)
phys_components = [q1, q2]
line_components = [drive, drive2, q1q2]
init_ground = tasks.InitialiseGround(
init_temp=Qty(value=init_temp, min=-0.001, max=0.22, unit='K'))
task_list = [init_ground]
model = Mdl(phys_components, line_components, task_list)
model.set_lindbladian(lindblad)
model.set_dressed(dressed)
# ### MAKE GENERATOR
lo = devices.LO(name='lo', resolution=sim_res)
awg = devices.AWG(name='awg', resolution=awg_res)
mixer = devices.Mixer(name='mixer')
v_to_hz = devices.Volts_to_Hertz(name='v_to_hz',
V_to_Hz=Qty(value=v2hz,
min=0.9e9,
max=1.1e9,
unit='Hz 2pi/V'))
dig_to_an = devices.Digital_to_Analog(name="dac", resolution=sim_res)
resp = devices.Response(name='resp',
rise_time=Qty(value=0.3e-9,
min=0.05e-9,
max=0.6e-9,
unit='s'),
resolution=sim_res)
device_list = [lo, awg, mixer, v_to_hz, dig_to_an, resp]
generator = Gnr(device_list)
generator.devices['awg'].enable_drag_2()
# ### MAKE GATESET
gateset = gates.GateSet()
gauss_params_single = {
'amp':
Qty(value=0.45, min=0.4, max=0.6, unit="V"),
't_final':
Qty(value=t_final, min=0.5 * t_final, max=1.5 * t_final, unit="s"),
'sigma':
Qty(value=t_final / 4, min=t_final / 8, max=t_final / 2, unit="s"),
'xy_angle':
Qty(value=0.0, min=-0.5 * np.pi, max=2.5 * np.pi, unit='rad'),
'freq_offset':
Qty(value=-sideband - 0.5e6 * 2 * np.pi,
min=-53 * 1e6 * 2 * np.pi,
max=-47 * 1e6 * 2 * np.pi,
unit='Hz 2pi'),
'delta':
Qty(value=-1, min=-5, max=3, unit="")
}
gauss_env_single = pulse.Envelope(
name="gauss",
desc="Gaussian comp for single-qubit gates",
params=gauss_params_single,
shape=envelopes.gaussian_nonorm)
nodrive_env = pulse.Envelope(name="no_drive",
params={
't_final':
Qty(value=t_final,
min=0.5 * t_final,
max=1.5 * t_final,
unit="s")
},
shape=envelopes.no_drive)
carrier_parameters = {
'freq':
Qty(value=lo_freq_q1,
min=4.5e9 * 2 * np.pi,
max=6e9 * 2 * np.pi,
unit='Hz 2pi'),
'framechange':
Qty(value=0.0, min=-np.pi, max=3 * np.pi, unit='rad')
}
carr = pulse.Carrier(name="carrier",
desc="Frequency of the local oscillator",
params=carrier_parameters)
carr_2 = copy.deepcopy(carr)
carr_2.params['freq'].set_value(lo_freq_q2)
X90p_q1 = gates.Instruction(name="X90p",
t_start=0.0,
t_end=t_final,
channels=["d1"])
X90p_q2 = gates.Instruction(name="X90p",
t_start=0.0,
t_end=t_final,
channels=["d2"])
QId_q1 = gates.Instruction(name="Id",
t_start=0.0,
t_end=t_final,
channels=["d1"])
QId_q2 = gates.Instruction(name="Id",
t_start=0.0,
t_end=t_final,
channels=["d2"])
X90p_q1.add_component(gauss_env_single, "d1")
X90p_q1.add_component(carr, "d1")
QId_q1.add_component(nodrive_env, "d1")
QId_q1.add_component(copy.deepcopy(carr), "d1")
QId_q1.comps['d1']['carrier'].params['framechange'].set_value(
(-sideband * t_final) % (2 * np.pi))
Y90p_q1 = copy.deepcopy(X90p_q1)
Y90p_q1.name = "Y90p"
X90m_q1 = copy.deepcopy(X90p_q1)
X90m_q1.name = "X90m"
Y90m_q1 = copy.deepcopy(X90p_q1)
Y90m_q1.name = "Y90m"
Y90p_q1.comps['d1']['gauss'].params['xy_angle'].set_value(0.5 * np.pi)
X90m_q1.comps['d1']['gauss'].params['xy_angle'].set_value(np.pi)
Y90m_q1.comps['d1']['gauss'].params['xy_angle'].set_value(1.5 * np.pi)
Q1_gates = [QId_q1, X90p_q1, Y90p_q1, X90m_q1, Y90m_q1]
X90p_q2.add_component(copy.deepcopy(gauss_env_single), "d2")
X90p_q2.add_component(carr_2, "d2")
QId_q2.add_component(copy.deepcopy(nodrive_env), "d2")
QId_q2.add_component(copy.deepcopy(carr_2), "d2")
QId_q2.comps['d2']['carrier'].params['framechange'].set_value(
(-sideband * t_final) % (2 * np.pi))
Y90p_q2 = copy.deepcopy(X90p_q2)
Y90p_q2.name = "Y90p"
X90m_q2 = copy.deepcopy(X90p_q2)
X90m_q2.name = "X90m"
Y90m_q2 = copy.deepcopy(X90p_q2)
Y90m_q2.name = "Y90m"
Y90p_q2.comps['d2']['gauss'].params['xy_angle'].set_value(0.5 * np.pi)
X90m_q2.comps['d2']['gauss'].params['xy_angle'].set_value(np.pi)
Y90m_q2.comps['d2']['gauss'].params['xy_angle'].set_value(1.5 * np.pi)
Q2_gates = [QId_q2, X90p_q2, Y90p_q2, X90m_q2, Y90m_q2]
all_1q_gates_comb = []
for g1 in Q1_gates:
for g2 in Q2_gates:
g = gates.Instruction(name="NONE",
t_start=0.0,
t_end=t_final,
channels=[])
g.name = g1.name + ":" + g2.name
channels = []
channels.extend(g1.comps.keys())
channels.extend(g2.comps.keys())
for chan in channels:
g.comps[chan] = {}
if chan in g1.comps:
g.comps[chan].update(g1.comps[chan])
if chan in g2.comps:
g.comps[chan].update(g2.comps[chan])
all_1q_gates_comb.append(g)
for gate in all_1q_gates_comb:
gateset.add_instruction(gate)
# ### MAKE EXPERIMENT
exp = Exp(model=model, generator=generator, gateset=gateset)
return exp
def create_experiment(gatetime: np.float64 = 7e-9, anhar=-210e6) -> Exp:
"""
Parameters
----------
gatetime : longer gatetimes needed for a better FFT of the microwave signal
"""
lindblad = False
dressed = True
qubit_lvls = 3
freq = 5e9
anhar = anhar
init_temp = 0
qubit_temp = 0
t_final = gatetime # Time for single qubit gates
sim_res = 100e9
awg_res = 2e9
sideband = 50e6
lo_freq = 5e9 + sideband
lo2_freq = lo_freq + anhar # for 1<->2
# ### MAKE MODEL
q1 = chip.Qubit(
name="Q1",
desc="Qubit 1",
freq=Qty(
value=freq,
min_val=4.995e9,
max_val=5.005e9,
unit="Hz 2pi",
),
anhar=Qty(
value=anhar,
# min_val=-380e9,
# max_val=-120e6,
unit="Hz 2pi",
),
hilbert_dim=qubit_lvls,
temp=Qty(value=qubit_temp, min_val=0.0, max_val=0.12, unit="K"),
)
drive = chip.Drive(
name="d1",
desc="Drive 1",
comment="Drive line 1 on qubit 1",
connected=["Q1"],
hamiltonian_func=hamiltonians.x_drive,
)
phys_components = [q1]
line_components = [drive]
init_ground = tasks.InitialiseGround(
init_temp=Qty(value=init_temp, min_val=-0.001, max_val=0.22, unit="K"))
task_list = [init_ground]
model = Mdl(phys_components, line_components, task_list)
model.set_lindbladian(lindblad)
model.set_dressed(dressed)
# ### MAKE GENERATOR
generator = Gnr(
devices={
"LO":
devices.LO(name="lo", resolution=sim_res, outputs=1),
"AWG":
devices.AWG(name="awg", resolution=awg_res, outputs=1),
"DigitalToAnalog":
devices.DigitalToAnalog(name="dac",
resolution=sim_res,
inputs=1,
outputs=1),
"Response":
devices.Response(
name="resp",
rise_time=Qty(value=0.3e-9,
min_val=0.05e-9,
max_val=0.6e-9,
unit="s"),
resolution=sim_res,
inputs=1,
outputs=1,
),
"Mixer":
devices.Mixer(name="mixer", inputs=2, outputs=1),
"VoltsToHertz":
devices.VoltsToHertz(
name="v_to_hz",
V_to_Hz=Qty(value=1e9,
min_val=0.9e9,
max_val=1.1e9,
unit="Hz/V"),
inputs=1,
outputs=1,
),
},
chains={
"d1": [
"LO", "AWG", "DigitalToAnalog", "Response", "Mixer",
"VoltsToHertz"
]
},
)
generator.devices["AWG"].enable_drag_2()
# ### MAKE GATESET
gauss_params_single = {
"amp":
Qty(value=0.45, min_val=0.4, max_val=0.6, unit="V"),
"t_final":
Qty(value=t_final,
min_val=0.5 * t_final,
max_val=1.5 * t_final,
unit="s"),
"sigma":
Qty(value=t_final / 4,
min_val=t_final / 8,
max_val=t_final / 2,
unit="s"),
"xy_angle":
Qty(value=0.0, min_val=-0.5 * np.pi, max_val=2.5 * np.pi, unit="rad"),
"freq_offset":
Qty(
value=-sideband - 0.5e6,
min_val=-60 * 1e6,
max_val=-40 * 1e6,
unit="Hz 2pi",
),
"delta":
Qty(value=-1, min_val=-5, max_val=3, unit=""),
}
gauss_params_pi = {
"amp":
Qty(value=0.8, min_val=0.4, max_val=0.9, unit="V"),
"t_final":
Qty(value=t_final,
min_val=0.5 * t_final,
max_val=1.5 * t_final,
unit="s"),
"sigma":
Qty(value=t_final / 4,
min_val=t_final / 8,
max_val=t_final / 2,
unit="s"),
"xy_angle":
Qty(value=0.0, min_val=-0.5 * np.pi, max_val=2.5 * np.pi, unit="rad"),
"freq_offset":
Qty(
value=-sideband - 0.5e6,
min_val=-60 * 1e6,
max_val=-40 * 1e6,
unit="Hz 2pi",
),
"delta":
Qty(value=-1, min_val=-5, max_val=3, unit=""),
}
gauss_env_pi = pulse.Envelope(
name="gauss",
desc="Gaussian comp for single-qubit gates",
params=gauss_params_pi,
shape=envelopes.gaussian_nonorm,
)
gauss_env_single = pulse.Envelope(
name="gauss",
desc="Gaussian comp for single-qubit gates",
params=gauss_params_single,
shape=envelopes.gaussian_nonorm,
)
nodrive_env = pulse.Envelope(
name="no_drive",
params={
"t_final":
Qty(value=t_final,
min_val=0.5 * t_final,
max_val=1.5 * t_final,
unit="s")
},
shape=envelopes.no_drive,
)
carrier_parameters = {
"freq":
Qty(
value=lo_freq,
min_val=4.5e9,
max_val=6e9,
unit="Hz 2pi",
),
"framechange":
Qty(value=0.0, min_val=-np.pi, max_val=3 * np.pi, unit="rad"),
}
carr = pulse.Carrier(
name="carrier",
desc="Frequency of the local oscillator",
params=carrier_parameters,
)
# for 1<->2
carrier2_parameters = {
"freq":
Qty(
value=lo2_freq,
min_val=4.5e9,
max_val=6e9,
unit="Hz 2pi",
),
"framechange":
Qty(value=0.0, min_val=-np.pi, max_val=3 * np.pi, unit="rad"),
}
carr2 = pulse.Carrier(
name="carrier",
desc="Frequency of the local oscillator 2",
params=carrier2_parameters,
)
PI01p = gates.Instruction(name="PI01p",
t_start=0.0,
t_end=t_final,
channels=["d1"])
RX90p = gates.Instruction(name="RX90p",
t_start=0.0,
t_end=t_final,
channels=["d1"])
RXp12 = gates.Instruction(name="RXp12",
t_start=0.0,
t_end=t_final,
channels=["d1"])
RXp = gates.Instruction(name="RXp",
t_start=0.0,
t_end=t_final,
channels=["d1"])
QId = gates.Instruction(name="Id",
t_start=0.0,
t_end=t_final,
channels=["d1"])
PI01p.add_component(gauss_env_pi, "d1")
PI01p.add_component(carr, "d1")
RX90p.add_component(gauss_env_single, "d1")
RX90p.add_component(carr, "d1")
RXp12.add_component(gauss_env_pi, "d1")
RXp12.add_component(carr2, "d1")
RXp.add_component(gauss_env_pi, "d1")
RXp.add_component(carr, "d1")
QId.add_component(nodrive_env, "d1")
QId.add_component(copy.deepcopy(carr), "d1")
QId.comps["d1"]["carrier"].params["framechange"].set_value(
(-sideband * t_final) % (2 * np.pi))
RY90p = copy.deepcopy(RX90p)
RY90p.name = "RY90p"
RX90m = copy.deepcopy(RX90p)
RX90m.name = "RX90m"
RY90m = copy.deepcopy(RX90p)
RY90m.name = "RY90m"
RY90p.comps["d1"]["gauss"].params["xy_angle"].set_value(0.5 * np.pi)
RX90m.comps["d1"]["gauss"].params["xy_angle"].set_value(np.pi)
RY90m.comps["d1"]["gauss"].params["xy_angle"].set_value(1.5 * np.pi)
parameter_map = PMap(
instructions=[QId, RX90p, RY90p, RX90m, RY90m, RXp12, PI01p, RXp],
model=model,
generator=generator)
# ### MAKE EXPERIMENT
exp = Exp(pmap=parameter_map)
return exp
def create_experiment():
lindblad = False
dressed = True
qubit_lvls = 3
freq = 5e9 * 2 * np.pi
anhar = -210e6 * 2 * np.pi
init_temp = 0
qubit_temp = 0
v2hz = 1e9
t_final = 7e-9 # Time for single qubit gates
sim_res = 100e9
awg_res = 2e9
meas_offset = 0.0
meas_scale = 1.0
sideband = 50e6 * 2 * np.pi
lo_freq = 5e9 * 2 * np.pi + sideband
# ### MAKE MODEL
q1 = chip.Qubit(name="Q1",
desc="Qubit 1",
freq=Qty(value=freq,
min=4.995e9 * 2 * np.pi,
max=5.005e9 * 2 * np.pi,
unit='Hz 2pi'),
anhar=Qty(value=anhar,
min=-380e6 * 2 * np.pi,
max=-120e6 * 2 * np.pi,
unit='Hz 2pi'),
hilbert_dim=qubit_lvls,
temp=Qty(value=qubit_temp, min=0.0, max=0.12, unit='K'))
drive = chip.Drive(name="d1",
desc="Drive 1",
comment="Drive line 1 on qubit 1",
connected=["Q1"],
hamiltonian_func=hamiltonians.x_drive)
phys_components = [q1]
line_components = [drive]
init_ground = tasks.InitialiseGround(
init_temp=Qty(value=init_temp, min=-0.001, max=0.22, unit='K'))
task_list = [init_ground]
model = Mdl(phys_components, line_components, task_list)
model.set_lindbladian(lindblad)
model.set_dressed(dressed)
# ### MAKE GENERATOR
lo = devices.LO(name='lo', resolution=sim_res)
awg = devices.AWG(name='awg', resolution=awg_res)
mixer = devices.Mixer(name='mixer')
v_to_hz = devices.Volts_to_Hertz(name='v_to_hz',
V_to_Hz=Qty(value=v2hz,
min=0.9e9,
max=1.1e9,
unit='Hz 2pi/V'))
dig_to_an = devices.Digital_to_Analog(name="dac", resolution=sim_res)
resp = devices.Response(name='resp',
rise_time=Qty(value=0.3e-9,
min=0.05e-9,
max=0.6e-9,
unit='s'),
resolution=sim_res)
device_list = [lo, awg, mixer, v_to_hz, dig_to_an, resp]
generator = Gnr(device_list)
generator.devices['awg'].enable_drag_2()
# ### MAKE GATESET
gateset = gates.GateSet()
gauss_params_single = {
'amp':
Qty(value=0.45, min=0.4, max=0.6, unit="V"),
't_final':
Qty(value=t_final, min=0.5 * t_final, max=1.5 * t_final, unit="s"),
'sigma':
Qty(value=t_final / 4, min=t_final / 8, max=t_final / 2, unit="s"),
'xy_angle':
Qty(value=0.0, min=-0.5 * np.pi, max=2.5 * np.pi, unit='rad'),
'freq_offset':
Qty(value=-sideband - 0.5e6 * 2 * np.pi,
min=-60 * 1e6 * 2 * np.pi,
max=-40 * 1e6 * 2 * np.pi,
unit='Hz 2pi'),
'delta':
Qty(value=-1, min=-5, max=3, unit="")
}
gauss_env_single = pulse.Envelope(
name="gauss",
desc="Gaussian comp for single-qubit gates",
params=gauss_params_single,
shape=envelopes.gaussian_nonorm)
nodrive_env = pulse.Envelope(name="no_drive",
params={
't_final':
Qty(value=t_final,
min=0.5 * t_final,
max=1.5 * t_final,
unit="s")
},
shape=envelopes.no_drive)
carrier_parameters = {
'freq':
Qty(value=lo_freq,
min=4.5e9 * 2 * np.pi,
max=6e9 * 2 * np.pi,
unit='Hz 2pi'),
'framechange':
Qty(value=0.0, min=-np.pi, max=3 * np.pi, unit='rad')
}
carr = pulse.Carrier(name="carrier",
desc="Frequency of the local oscillator",
params=carrier_parameters)
X90p = gates.Instruction(name="X90p",
t_start=0.0,
t_end=t_final,
channels=["d1"])
QId = gates.Instruction(name="Id",
t_start=0.0,
t_end=t_final,
channels=["d1"])
X90p.add_component(gauss_env_single, "d1")
X90p.add_component(carr, "d1")
QId.add_component(nodrive_env, "d1")
QId.add_component(copy.deepcopy(carr), "d1")
QId.comps['d1']['carrier'].params['framechange'].set_value(
(-sideband * t_final) % (2 * np.pi))
Y90p = copy.deepcopy(X90p)
Y90p.name = "Y90p"
X90m = copy.deepcopy(X90p)
X90m.name = "X90m"
Y90m = copy.deepcopy(X90p)
Y90m.name = "Y90m"
Y90p.comps['d1']['gauss'].params['xy_angle'].set_value(0.5 * np.pi)
X90m.comps['d1']['gauss'].params['xy_angle'].set_value(np.pi)
Y90m.comps['d1']['gauss'].params['xy_angle'].set_value(1.5 * np.pi)
for gate in [QId, X90p, Y90p, X90m, Y90m]:
gateset.add_instruction(gate)
# ### MAKE EXPERIMENT
exp = Exp(model=model, generator=generator, gateset=gateset)
return exp
def two_qubits() -> float:
"""script for setting up two qubits and optimising a simple gate
Returns
-------
float
result of optimisation run
"""
qubit_lvls = 3
freq_q1 = 5e9 * 2 * np.pi
anhar_q1 = -210e6 * 2 * np.pi
t1_q1 = 27e-6
t2star_q1 = 39e-6
qubit_temp = 50e-3
q1 = chip.Qubit(name="Q1",
desc="Qubit 1",
freq=Qty(value=freq_q1,
min=4.995e9 * 2 * np.pi,
max=5.005e9 * 2 * np.pi,
unit='Hz 2pi'),
anhar=Qty(value=anhar_q1,
min=-380e6 * 2 * np.pi,
max=-120e6 * 2 * np.pi,
unit='Hz 2pi'),
hilbert_dim=qubit_lvls,
t1=Qty(value=t1_q1, min=1e-6, max=90e-6, unit='s'),
t2star=Qty(value=t2star_q1, min=10e-6, max=90e-3,
unit='s'),
temp=Qty(value=qubit_temp, min=0.0, max=0.12, unit='K'))
freq_q2 = 5.6e9 * 2 * np.pi
anhar_q2 = -240e6 * 2 * np.pi
t1_q2 = 23e-6
t2star_q2 = 31e-6
q2 = chip.Qubit(name="Q2",
desc="Qubit 2",
freq=Qty(value=freq_q2,
min=5.595e9 * 2 * np.pi,
max=5.605e9 * 2 * np.pi,
unit='Hz 2pi'),
anhar=Qty(value=anhar_q2,
min=-380e6 * 2 * np.pi,
max=-120e6 * 2 * np.pi,
unit='Hz 2pi'),
hilbert_dim=qubit_lvls,
t1=Qty(value=t1_q2, min=1e-6, max=90e-6, unit='s'),
t2star=Qty(value=t2star_q2, min=10e-6, max=90e-6,
unit='s'),
temp=Qty(value=qubit_temp, min=0.0, max=0.12, unit='K'))
coupling_strength = 20e6 * 2 * np.pi
q1q2 = chip.Coupling(name="Q1-Q2",
desc="coupling",
comment="Coupling qubit 1 to qubit 2",
connected=["Q1", "Q2"],
strength=Qty(value=coupling_strength,
min=-1 * 1e3 * 2 * np.pi,
max=200e6 * 2 * np.pi,
unit='Hz 2pi'),
hamiltonian_func=hamiltonians.int_XX)
drive = chip.Drive(name="d1",
desc="Drive 1",
comment="Drive line 1 on qubit 1",
connected=["Q1"],
hamiltonian_func=hamiltonians.x_drive)
drive2 = chip.Drive(name="d2",
desc="Drive 2",
comment="Drive line 2 on qubit 2",
connected=["Q2"],
hamiltonian_func=hamiltonians.x_drive)
m00_q1 = 0.97 # Prop to read qubit 1 state 0 as 0
m01_q1 = 0.04 # Prop to read qubit 1 state 0 as 1
m00_q2 = 0.96 # Prop to read qubit 2 state 0 as 0
m01_q2 = 0.05 # Prop to read qubit 2 state 0 as 1
one_zeros = np.array([0] * qubit_lvls)
zero_ones = np.array([1] * qubit_lvls)
one_zeros[0] = 1
zero_ones[0] = 0
val1 = one_zeros * m00_q1 + zero_ones * m01_q1
val2 = one_zeros * m00_q2 + zero_ones * m01_q2
min = one_zeros * 0.8 + zero_ones * 0.0
max = one_zeros * 1.0 + zero_ones * 0.2
confusion_row1 = Qty(value=val1, min=min, max=max, unit="")
confusion_row2 = Qty(value=val2, min=min, max=max, unit="")
conf_matrix = tasks.ConfusionMatrix(Q1=confusion_row1, Q2=confusion_row2)
init_temp = 50e-3
init_ground = tasks.InitialiseGround(
init_temp=Qty(value=init_temp, min=-0.001, max=0.22, unit='K'))
model = Mdl(
[q1, q2], # Individual, self-contained components
[drive, drive2, q1q2], # Interactions between components
[conf_matrix, init_ground] # SPAM processing
)
model.set_lindbladian(False)
model.set_dressed(True)
sim_res = 100e9 # Resolution for numerical simulation
awg_res = 2e9 # Realistic, limited resolution of an AWG
lo = devices.LO(name='lo', resolution=sim_res)
awg = devices.AWG(name='awg', resolution=awg_res)
mixer = devices.Mixer(name='mixer')
resp = devices.Response(name='resp',
rise_time=Qty(value=0.3e-9,
min=0.05e-9,
max=0.6e-9,
unit='s'),
resolution=sim_res)
dig_to_an = devices.Digital_to_Analog(name="dac", resolution=sim_res)
v2hz = 1e9
v_to_hz = devices.Volts_to_Hertz(name='v_to_hz',
V_to_Hz=Qty(value=v2hz,
min=0.9e9,
max=1.1e9,
unit='Hz 2pi/V'))
generator = Gnr([lo, awg, mixer, v_to_hz, dig_to_an, resp])
import c3.signal.gates as gates
gateset = gates.GateSet()
t_final = 7e-9 # Time for single qubit gates
sideband = 50e6 * 2 * np.pi
gauss_params_single = {
'amp':
Qty(value=0.5, min=0.4, max=0.6, unit="V"),
't_final':
Qty(value=t_final, min=0.5 * t_final, max=1.5 * t_final, unit="s"),
'sigma':
Qty(value=t_final / 4, min=t_final / 8, max=t_final / 2, unit="s"),
'xy_angle':
Qty(value=0.0, min=-0.5 * np.pi, max=2.5 * np.pi, unit='rad'),
'freq_offset':
Qty(value=-sideband - 3e6 * 2 * np.pi,
min=-56 * 1e6 * 2 * np.pi,
max=-52 * 1e6 * 2 * np.pi,
unit='Hz 2pi'),
'delta':
Qty(value=-1, min=-5, max=3, unit="")
}
gauss_env_single = pulse.Envelope(
name="gauss",
desc="Gaussian comp for single-qubit gates",
params=gauss_params_single,
shape=envelopes.gaussian_nonorm)
nodrive_env = pulse.Envelope(name="no_drive",
params={
't_final':
Qty(value=t_final,
min=0.5 * t_final,
max=1.5 * t_final,
unit="s")
},
shape=envelopes.no_drive)
lo_freq_q1 = 5e9 * 2 * np.pi + sideband
carrier_parameters = {
'freq':
Qty(value=lo_freq_q1,
min=4.5e9 * 2 * np.pi,
max=6e9 * 2 * np.pi,
unit='Hz 2pi'),
'framechange':
Qty(value=0.0, min=-np.pi, max=3 * np.pi, unit='rad')
}
carr = pulse.Carrier(name="carrier",
desc="Frequency of the local oscillator",
params=carrier_parameters)
lo_freq_q2 = 5.6e9 * 2 * np.pi + sideband
carr_2 = copy.deepcopy(carr)
carr_2.params['freq'].set_value(lo_freq_q2)
X90p_q1 = gates.Instruction(name="X90p",
t_start=0.0,
t_end=t_final,
channels=["d1"])
X90p_q2 = gates.Instruction(name="X90p",
t_start=0.0,
t_end=t_final,
channels=["d2"])
QId_q1 = gates.Instruction(name="Id",
t_start=0.0,
t_end=t_final,
channels=["d1"])
QId_q2 = gates.Instruction(name="Id",
t_start=0.0,
t_end=t_final,
channels=["d2"])
X90p_q1.add_component(gauss_env_single, "d1")
X90p_q1.add_component(carr, "d1")
QId_q1.add_component(nodrive_env, "d1")
QId_q1.add_component(copy.deepcopy(carr), "d1")
X90p_q2.add_component(copy.deepcopy(gauss_env_single), "d2")
X90p_q2.add_component(carr_2, "d2")
QId_q2.add_component(copy.deepcopy(nodrive_env), "d2")
QId_q2.add_component(copy.deepcopy(carr_2), "d2")
QId_q1.comps['d1']['carrier'].params['framechange'].set_value(
(-sideband * t_final) % (2 * np.pi))
QId_q2.comps['d2']['carrier'].params['framechange'].set_value(
(-sideband * t_final) % (2 * np.pi))
Y90p_q1 = copy.deepcopy(X90p_q1)
Y90p_q1.name = "Y90p"
X90m_q1 = copy.deepcopy(X90p_q1)
X90m_q1.name = "X90m"
Y90m_q1 = copy.deepcopy(X90p_q1)
Y90m_q1.name = "Y90m"
Y90p_q1.comps['d1']['gauss'].params['xy_angle'].set_value(0.5 * np.pi)
X90m_q1.comps['d1']['gauss'].params['xy_angle'].set_value(np.pi)
Y90m_q1.comps['d1']['gauss'].params['xy_angle'].set_value(1.5 * np.pi)
Q1_gates = [QId_q1, X90p_q1, Y90p_q1, X90m_q1, Y90m_q1]
Y90p_q2 = copy.deepcopy(X90p_q2)
Y90p_q2.name = "Y90p"
X90m_q2 = copy.deepcopy(X90p_q2)
X90m_q2.name = "X90m"
Y90m_q2 = copy.deepcopy(X90p_q2)
Y90m_q2.name = "Y90m"
Y90p_q2.comps['d2']['gauss'].params['xy_angle'].set_value(0.5 * np.pi)
X90m_q2.comps['d2']['gauss'].params['xy_angle'].set_value(np.pi)
Y90m_q2.comps['d2']['gauss'].params['xy_angle'].set_value(1.5 * np.pi)
Q2_gates = [QId_q2, X90p_q2, Y90p_q2, X90m_q2, Y90m_q2]
all_1q_gates_comb = []
for g1 in Q1_gates:
for g2 in Q2_gates:
g = gates.Instruction(name="NONE",
t_start=0.0,
t_end=t_final,
channels=[])
g.name = g1.name + ":" + g2.name
channels = []
channels.extend(g1.comps.keys())
channels.extend(g2.comps.keys())
for chan in channels:
g.comps[chan] = {}
if chan in g1.comps:
g.comps[chan].update(g1.comps[chan])
if chan in g2.comps:
g.comps[chan].update(g2.comps[chan])
all_1q_gates_comb.append(g)
for gate in all_1q_gates_comb:
gateset.add_instruction(gate)
exp = Exp(model=model, generator=generator, gateset=gateset)
exp.opt_gates = ['X90p:Id', 'Id:Id']
gates = exp.get_gates()
psi_init = [[0] * 9]
psi_init[0][0] = 1
init_state = tf.transpose(tf.constant(psi_init, tf.complex128))
barely_a_seq = ['X90p:Id']
barely_a_seq * 10
generator.devices['awg'].enable_drag_2()
opt_gates = ["X90p:Id"]
gateset_opt_map = [[
("X90p:Id", "d1", "gauss", "amp"),
], [
("X90p:Id", "d1", "gauss", "freq_offset"),
], [
("X90p:Id", "d1", "gauss", "xy_angle"),
], [
("X90p:Id", "d1", "gauss", "delta"),
]]
opt = C1(dir_path="/tmp/c3log/",
fid_func=fidelities.average_infid_set,
fid_subspace=["Q1", "Q2"],
gateset_opt_map=gateset_opt_map,
opt_gates=opt_gates,
algorithm=algorithms.lbfgs,
options={"maxfun": 10},
run_name="better_X90")
opt.set_exp(exp)
opt.optimize_controls()
return (opt.current_best_goal)