def OnKeyDown(self, e):
k = e.GetKeyCode()
if k == wx.WXK_UP:
sel = cad.GetSelectedObjects()
index = -1
if len(sel) > 0:
index = self.ObjectRenderedIndex(sel[-1])
if index > 0:
index -= 1
if (index == -1) and (len(self.rendered_objects) > 0):
index = len(self.rendered_objects) - 1
cad.ClearSelection(True)
if len(self.rendered_objects):
cad.Select(self.rendered_objects[index])
elif k == wx.WXK_DOWN:
sel = cad.GetSelectedObjects()
index = -1
if len(sel) > 0:
index = self.ObjectRenderedIndex(sel[-1])
if index < len(self.rendered_objects) - 1:
index += 1
if (index == -1) and (len(self.rendered_objects) > 0):
index = 0
cad.ClearSelection(True)
if len(self.rendered_objects):
cad.Select(self.rendered_objects[index])
else:
wx.GetApp().OnKeyDown(e)
def OriTransform():
if cad.GetNumSelected() == 0:
wx.GetApp().PickObjects('Pick objects to transform')
if cad.GetNumSelected() == 0:
return
config = HeeksConfig()
selected_items = cad.GetSelectedObjects()
cad.ClearSelection(False)
o1 = PickOrigin('Pick From Origin')
if o1 == None:
wx.MessageBox("You didn't pick an origin\nTransform Cancelled!")
return
o2 = PickOrigin('Pick To Origin')
if o2 == None:
wx.MessageBox("You didn't pick an origin\nTransform Cancelled!")
return
cad.StartHistory()
m1 = o1.GetOrigin()
mat = m1.Inverse()
m2 = o2.GetOrigin()
mat.Multiply(m2)
for object in selected_items:
cad.TransformUndoably(object, mat)
cad.EndHistory()
def OnSweep(self, event):
if cad.GetNumSelected() == 0:
self.PickObjects('Pick Some Sketches, Faces or Circles')
if not self.CheckForNumberOrMore(
1,
[
cad.OBJECT_TYPE_SKETCH,
step.GetFaceType(), cad.OBJECT_TYPE_CIRCLE
], 'Pick one or more sketches, faces or circles, to sweep\n( hold down Ctrl key to select more than one solid )',
'Sweep'):
return
sweep_objects = cad.GetSelectedObjects()
cad.ClearSelection(True)
self.PickObjects('Pick a Sketch to Sweep Along')
if not self.CheckForNumberOrMore(1, [cad.OBJECT_TYPE_SKETCH],
'Pick one sketch to sweep along',
'Sweep'):
return
sweep_profile = cad.GetSelectedObjects()[0]
cad.StartHistory()
step.CreateSweep(sweep_objects, sweep_profile,
cad.Color(128, 150, 128))
cad.EndHistory()
def OnLeftClick(self, event):
# select one object
objects = cad.ObjectsUnderWindow(cad.IRect(self.select_mode.button_down_point.x, self.select_mode.button_down_point.y), False, True, self.select_mode.filter, True)
if len(objects) > 0:
object = objects[0]
if event.controlDown:
if cad.ObjectMarked(object):
cad.Unselect(object, True)
else:
cad.Select(object)
else:
cad.ClearSelection(True)
cad.Select(object)
else:
cad.ClearSelection(True)
def OnLeftClick(self, event):
if not event.controlDown:
# check for nc code block clicked
if self.select_mode.filter.IsTypeInFilter(cam.GetNcCodeBlockType()):
mask = cad.Filter()
mask.AddType(cam.GetNcCodeBlockType())
objects = cad.ObjectsUnderWindow(cad.IRect(self.select_mode.button_down_point.x, self.select_mode.button_down_point.y), False, True, mask, False)
if len(objects):
block = objects[0]
cad.ClearSelection()
cad.Select(block)
block.__class__ = cam.NcCodeBlock
self.output_window.viewport.SelectLine(block.line_number, True)
wx.GetApp().frame.graphics_canvas.Refresh()
self.output_window.Refresh()
return
program = wx.GetApp().program
if program != None:
nccode = program.nccode
if nccode != None:
nccode.nc_code.SetHighlightedBlock(None)
# do the default click behaviour
SolidApp.OnLeftClick(self, event)
def AddObjectFromButton(self, new_object):
cad.StartHistory()
cad.AddUndoably(new_object, None, None)
cad.ClearSelection(True)
cad.Select(new_object)
self.SetInputMode(self.select_mode)
cad.EndHistory()
cad.Repaint()
def OnLeftDown(self, event):
# select the block clicked on
line_number = self.viewport.GetCurrentLine(
) + event.y / self.viewport.GetPixelsPerLine()
block = self.viewport.GetBlockAtLine(int(line_number))
cad.ClearSelection()
cad.Select(block)
self.viewport.SelectLine(line_number, False)
wx.GetApp().frame.graphics_canvas.Refresh()
self.Refresh()
def PickSketch(self):
cad.ClearSelection()
wx.GetApp().PickObjects('Pick a sketch', cad.OBJECT_TYPE_SKETCH, True)
self.cmbSketch.Recreate()
self.Fit()
id = 0
if cad.GetNumSelected() > 0: id = cad.GetSelectedObjects()[0].GetID()
self.cmbSketch.SelectById(id)
def OnPaste(self, e):
s = self.GetClipboardText()
if s != None:
temp_file = wx.StandardPaths.Get().GetTempDir() + '/temp_Heeks_clipboard_file.xml'
f = open(temp_file, 'w')
f.write(s)
f.close()
cad.ClearSelection()
cad.SetMarkNewlyAddedObjects(True)
cad.Import(temp_file)
cad.SetMarkNewlyAddedObjects(False)
def Mirror():
if cad.GetNumSelected() == 0:
wx.GetApp().PickObjects('Pick objects to mirror')
if cad.GetNumSelected() == 0:
return
config = HeeksConfig()
selected_items = cad.GetSelectedObjects()
cad.ClearSelection(False)
copy = config.ReadBool("MirrorCopy", False)
axis = geom.Point3D(0, 0, 1)
pos = geom.Point3D(0, 0, 0)
axis.x = config.ReadFloat("MirrorAxisX", 1.0)
axis.y = config.ReadFloat("MirrorAxisY", 0.0)
axis.z = config.ReadFloat("MirrorAxisZ", 0.0)
pos.x = config.ReadFloat("MirrorPosX", 0.0)
pos.y = config.ReadFloat("MirrorPosY", 0.0)
pos.z = config.ReadFloat("MirrorPosZ", 0.0)
result, axis, pos, copy = InputMirrorPlane(axis, pos, copy, 'Mirror')
if not result:
return
config.WriteBool("MirrorCopy", copy)
config.WriteFloat("MirrorAxisX", axis.x)
config.WriteFloat("MirrorAxisY", axis.y)
config.WriteFloat("MirrorAxisZ", axis.z)
config.WriteFloat("MirrorPosX", pos.x)
config.WriteFloat("MirrorPosY", pos.y)
config.WriteFloat("MirrorPosZ", pos.z)
cad.StartHistory()
mat = geom.Matrix()
x, y = axis.ArbitraryAxes()
axis_mat = geom.Matrix(pos, x, y)
inv_mat = axis_mat.Inverse()
mat.Multiply(inv_mat) # transform so axis goes to z axis
mat.Scale3(1.0, 1.0, -1.0) # mirror in z axis
mat.Multiply(axis_mat) # transform back to where it was
for object in selected_items:
if copy:
if object.CanBeCopied():
object = object.MakeACopy()
object.Transform(mat)
cad.AddUndoably(object)
else:
cad.TransformUndoably(object, mat)
cad.EndHistory()
def PickPoints(self):
cad.ClearSelection()
wx.GetApp().PickObjects('Pick points to drill',
cad.Filter(cad.OBJECT_TYPE_POINT), False)
ids = []
for object in cad.GetSelectedObjects():
if object.GetType() == cad.OBJECT_TYPE_POINT:
ids.append(object.GetID())
self.idsPoints.SetFromIdList(ids)
self.Fit()
def OnChamfer(self, event):
if not self.CheckForNumberOrMore(
1, [step.GetEdgeType()],
'Pick one or more edges to add a chamfer to', 'Edge Chamfer'):
return
config = HeeksConfig()
rad = config.ReadFloat('EdgeChamferDist', 2.0)
rad = self.InputLength('Enter Chamfer Distance', 'Distance', rad)
if rad:
cad.StartHistory()
step.FilletOrChamferEdges(rad, True)
config.WriteFloat('EdgeChamferDist', rad)
cad.ClearSelection(True)
cad.EndHistory()
def OffsetSketch(self, object):
config = HeeksConfig()
value = config.ReadFloat('SketchOffsetValue', 1.0)
value = self.InputLength('Offset Sketch', 'Offset Value +ve for Outwards -ve for Inwards', value)
if value == None: return
sketch = object
sketch.__class__ = cad.Sketch
area = sketch.GetArea()
area.Reorder()
area.Offset(-value)
new_object = cad.NewSketchFromArea(area)
cad.AddUndoably(new_object)
cad.ClearSelection()
cad.Select(new_object)
def OnFillet(self, event):
if not self.CheckForNumberOrMore(
1, [step.GetEdgeType()],
'Pick one or more edges to add a fillet to', 'Edge Fillet'):
return
config = HeeksConfig()
rad = config.ReadFloat('EdgeBlendRadius', 2.0)
rad = self.InputLength('Enter Blend Radius', 'Radius', rad)
if rad:
cad.StartHistory()
step.FilletOrChamferEdges(rad, False)
config.WriteFloat('EdgeBlendRadius', rad)
cad.ClearSelection(True)
cad.EndHistory()
def Scale():
centre_Pos = geom.Point3D(0, 0, 0)
if cad.GetNumSelected() == 0:
wx.GetApp().PickObjects('Pick objects to scale')
if cad.GetNumSelected() == 0:
return
config = HeeksConfig()
selected_items = cad.GetSelectedObjects()
cad.ClearSelection(False)
scale_factor = config.ReadFloat('ScaleFactor', 1.0)
copy = config.ReadBool("ScaleCopy", False)
pos = geom.Point3D(0, 0, 0)
pos.x = config.ReadFloat("ScaleAboutPosX", 0.0)
pos.y = config.ReadFloat("ScaleAboutPosY", 0.0)
pos.z = config.ReadFloat("ScaleAboutPosZ", 0.0)
result, pos, scale_factor, copy = InputScale(pos, scale_factor, copy,
'Scale')
if not result:
return
config.WriteFloat("ScaleFactor", scale_factor)
config.WriteBool("ScaleCopy", copy)
config.WriteFloat("ScaleAboutPosX", pos.x)
config.WriteFloat("ScaleAboutPosY", pos.y)
config.WriteFloat("ScaleAboutPosZ", pos.z)
cad.StartHistory()
mat = geom.Matrix()
mat.Translate(-pos)
mat.Scale(scale_factor)
mat.Translate(pos)
for object in selected_items:
if copy:
if object.CanBeCopied():
object = object.MakeACopy()
object.Transform(mat)
cad.AddUndoably(object)
else:
cad.TransformUndoably(object, mat)
cad.EndHistory()
def PickSolids(self):
cad.ClearSelection(True)
filter = cad.Filter()
filter.AddType(cad.OBJECT_TYPE_STL_SOLID)
if wx.GetApp().IsSolidApp():
import step
filter.AddType(step.GetSolidType())
wx.GetApp().PickObjects('Pick solids', filter, False)
solids = []
for object in cad.GetSelectedObjects():
if object.GetIDGroupType() == cad.OBJECT_TYPE_STL_SOLID:
solids.append(object.GetID())
self.idsSolids.SetFromIdList(solids)
self.Fit()
def OnSetOriginPoints(self, three_points):
mat = cad.GetDrawMatrix(False)
o = geom.Point3D(0,0,0).Transformed(mat)
x = geom.Point3D(1,0,0).Transformed(mat) - o
y = geom.Point3D(0,1,0).Transformed(mat) - o
new_object = cad.NewCoordinateSystem("Coordinate System", o, x, y)
cad.ClearSelection()
self.SetInputMode(self.select_mode)
# and pick from three points
result = self.MakeOriginFromPickPoints(new_object, three_points)
if result:
cad.AddUndoably(new_object)
cad.Select(new_object)
else:
cad.DeleteInternalObject(new_object)
def OnLabelLeftDown(self, object, event):
if event.ShiftDown():
self.waiting_until_left_up = cad.ShiftSelect(
object, event.ControlDown())
else:
# shift not down
if event.ControlDown():
if cad.ObjectMarked(object):
cad.Unselect(object, True)
else:
cad.Select(object, True)
else:
if cad.ObjectMarked(object):
self.waiting_until_left_up = True
cad.Select(object, True)
else:
cad.ClearSelection(False)
cad.Select(object, True)
def Translate(copy=False):
if cad.GetNumSelected() == 0:
wx.GetApp().PickObjects('Pick objects to move')
if cad.GetNumSelected() == 0:
return
config = HeeksConfig()
ncopies = None
if copy:
ncopies = config.ReadInt('TranslateNumCopies', 1)
RemoveUncopyable()
if cad.GetNumSelected() == 0:
return
selected_items = cad.GetSelectedObjects()
cad.ClearSelection(False)
fromp = geom.Point3D()
to = geom.Point3D()
fromp.x = config.ReadFloat("TranslateFromX", 0.0)
fromp.y = config.ReadFloat("TranslateFromY", 0.0)
fromp.z = config.ReadFloat("TranslateFromZ", 0.0)
to.x = config.ReadFloat("TranslateToX", 0.0)
to.y = config.ReadFloat("TranslateToY", 0.0)
to.z = config.ReadFloat("TranslateToZ", 0.0)
result, fromp, to, ncopies = InputFromAndTo(fromp, to, ncopies,
'Move Translate')
if not result:
return
if copy:
if ncopies < 1:
return
config.WriteInt("TranslateNumCopies", ncopies)
config.WriteFloat("TranslateFromX", fromp.x)
config.WriteFloat("TranslateFromY", fromp.y)
config.WriteFloat("TranslateFromZ", fromp.z)
config.WriteFloat("TranslateToX", to.x)
config.WriteFloat("TranslateToY", to.y)
config.WriteFloat("TranslateToZ", to.z)
cad.StartHistory()
if copy:
for i in range(0, ncopies):
mat = geom.Matrix()
mat.Translate((to - fromp) * (i + 1))
for object in selected_items:
new_object = object.MakeACopy()
object.GetOwner().Add(new_object)
cad.TransformUndoably(new_object, mat)
else:
mat = geom.Matrix()
mat.Translate(to - fromp)
for object in selected_items:
cad.TransformUndoably(object, mat)
cad.EndHistory()
def Rotate(copy=False):
#rotation axis - Z axis by default
axis_Dir = geom.Point3D(0, 0, 1)
line_Pos = geom.Point3D(0, 0, 0)
if cad.GetNumSelected() == 0:
wx.GetApp().PickObjects('Pick objects to rotate')
if cad.GetNumSelected() == 0:
return
config = HeeksConfig()
ncopies = None
if copy:
ncopies = config.ReadInt('RotateNumCopies', 1)
RemoveUncopyable()
if cad.GetNumSelected() == 0:
return
selected_items = cad.GetSelectedObjects()
cad.ClearSelection(False)
angle = config.ReadFloat('RotateAngle', 90.0)
# enter angle, plane and position
axis = geom.Point3D(0, 0, 1)
pos = geom.Point3D(0, 0, 0)
axis.x = config.ReadFloat("RotateAxisX", 0.0)
axis.y = config.ReadFloat("RotateAxisY", 0.0)
axis.z = config.ReadFloat("RotateAxisZ", 1.0)
pos.x = config.ReadFloat("RotatePosX", 0.0)
pos.y = config.ReadFloat("RotatePosY", 0.0)
pos.z = config.ReadFloat("RotatePosZ", 0.0)
axial_shift = config.ReadFloat('RotateAxialShift', 0.0)
result, angle, axis, pos, ncopies, axial_shift = InputAngleWithPlane(
angle, axis, pos, ncopies, axial_shift, 'Rotate')
if not result:
return
if copy:
if ncopies < 1:
return
config.WriteInt("RotateNumCopies", ncopies)
config.WriteFloat("RotateAngle", angle)
config.WriteFloat("RotateAxialShift", axial_shift)
config.WriteFloat("RotateAxisX", axis.x)
config.WriteFloat("RotateAxisY", axis.y)
config.WriteFloat("RotateAxisZ", axis.z)
config.WriteFloat("RotatePosX", pos.x)
config.WriteFloat("RotatePosY", pos.y)
config.WriteFloat("RotatePosZ", pos.z)
cad.StartHistory()
if copy:
for i in range(0, ncopies):
mat = geom.Matrix()
mat.Translate(-pos)
mat.RotateAxis(angle * 0.0174532925199433 * (i + 1), axis)
mat.Translate(pos)
for object in selected_items:
new_object = object.MakeACopy()
object.GetOwner().Add(new_object)
cad.TransformUndoably(new_object, mat)
else:
mat = geom.Matrix()
mat.Translate(-pos)
mat.RotateAxis(angle * 0.0174532925199433, axis)
mat.Translate(pos)
for object in selected_items:
cad.TransformUndoably(object, mat)
cad.EndHistory()
def ChamferEdge(self, object):
cad.ClearSelection()
cad.Select(object)
self.OnChamfer(None)
def BlendEdge(self, object):
cad.ClearSelection()
cad.Select(object)
self.OnFillet(None)
def Run(self, event):
if not self.control_pressed:
cad.ClearSelection(False)
cad.Select(self.object)
def OnLabelRightDown(self, object, event):
if not cad.ObjectMarked(object):
cad.ClearSelection(False)
cad.Select(object, True)
def OnMouse(self, event):
# to do? if(wxGetApp().m_property_grid_validation)return;
if event.Entering():
self.SetFocus() # so middle wheel works
if event.LeftDown():
button = self.HitTest(event.GetPosition())
if button:
if button.type == ButtonTypePlus or button.type == ButtonTypeMinus:
self.SetExpanded(button.obj, button.type == ButtonTypePlus)
self.SetVirtualSize(self.GetRenderSize())
self.Refresh()
else:
self.OnLabelLeftDown(button.obj, event)
self.clicked_object = button.obj
else:
cad.ClearSelection(True)
self.button_down_point = event.GetPosition()
if event.LeftUp():
if self.dragging:
self.dragging = False
# find the object to drop on to
button = self.HitTest(event.GetPosition())
if (button == None) or not cad.ObjectMarked(
button.obj
): # can only drop on to an item other than one of the items being dragged
# test drop possible
drag_possible = True
add_to = cad.GetApp()
if button and button.paste_into: add_to = button.paste_into
for object in self.dragged_list:
if not add_to.CanAdd(object) or not object.CanAddTo(
add_to):
drag_possible = False
break
if drag_possible:
cad.StartHistory()
# cut the objects
cad.DeleteObjectsUndoably(self.dragged_list)
# paste the objects
for object in self.dragged_list:
if object.OneOfAKind():
one_found = False
child = add_to.GetFirstChild()
while child:
if child.GetType() == object.GetType():
child.CopyFrom(object)
one_found = True
break
child = add_to.GetNextChild()
if not one_found:
cad.AddUndoably(
object, add_to, button.paste_before if
(button != None) else None)
else:
cad.AddUndoably(
object, add_to, button.paste_before if
(button != None) else None)
cad.EndHistory()
else:
self.Refresh()
else:
self.Refresh()
else:
if self.waiting_until_left_up:
cad.ClearSelection(False)
cad.Select(self.clicked_object, True)
self.waiting_until_left_up = False
if event.RightDown():
button = self.HitTest(event.GetPosition())
self.clicked_object = None
if (button != None) and (button.type == ButtonTypeLabelBefore
or button.type == ButtonTypeLabel):
self.clicked_object = button.obj
self.OnLabelRightDown(button.obj, event)
if event.RightUp():
if self.dragging:
self.dragging = False
else:
tools = self.GetDropDownTools(event.ControlDown())
menu = wx.Menu()
for tool in tools:
wx.GetApp().AddToolToListAndMenu(tool, menu)
self.PopupMenu(menu, event.GetPosition())
if event.Dragging():
if event.LeftIsDown() or event.RightIsDown():
if (not self.dragging) and (
math.fabs(self.button_down_point.x - event.GetX()) > 2
or math.fabs(self.button_down_point.y - event.GetY()) >
2):
self.dragging = True
self.dragged_list = cad.GetSelectedObjects()
if self.dragging:
self.drag_position = self.CalcUnscrolledPosition(
event.GetPosition())
button = self.HitTest(event.GetPosition())
self.drag_paste_rect = wx.Rect(0, 0, 0, 0)
if (button != None) and (button.type == ButtonTypeLabelBefore):
self.drag_paste_rect = button.rect
self.Refresh()
if event.LeftDClick():
if self.clicked_object:
wx.GetApp().EditUndoably(self.clicked_object)
event.Skip()