def newDocument(self, fname=None):
"""Creates a new Document, reusing the DocumentController.
Tells all of the views to reset and removes all items from
them
"""
if fname is not None and self.fileName() == fname:
setReopen(True)
self._document.makeNew()
self._has_no_associated_file = fname is None
self.win.setWindowTitle(self.documentTitle() + '[*]')
def newDocument(self, fname=None):
"""Creates a new Document, reusing the DocumentController.
Tells all of the views to reset and removes all items from
them
"""
if fname is not None and self.fileName() == fname:
setReopen(True)
self._document.makeNew()
self._has_no_associated_file = fname is None
self.win.setWindowTitle(self.documentTitle() + '[*]')
def newDocument(self, doc=None, fname=None):
"""Creates a new Document, reusing the DocumentController."""
if fname is not None and self._filename == fname:
setReopen(True)
self._document.resetViews()
setBatch(True)
self._document.removeAllParts() # clear out old parts
setBatch(False)
self._document.undoStack().clear() # reset undostack
self._filename = fname if fname else "untitled.json"
self._has_no_associated_file = fname == None
self._active_part = None
self.win.setWindowTitle(self.documentTitle() + '[*]')
def newDocument(self, doc=None, fname=None):
"""Creates a new Document, reusing the DocumentController."""
if fname is not None and self._filename == fname:
setReopen(True)
self._document.resetViews()
setBatch(True)
self._document.removeAllParts() # clear out old parts
setBatch(False)
self._document.undoStack().clear() # reset undostack
self._filename = fname if fname else "untitled.json"
self._has_no_associated_file = fname == None
self._active_part = None
self.win.setWindowTitle(self.documentTitle() + '[*]')
def decode(document: DocT, obj: dict, emit_signals: bool = True):
"""Parses a dictionary (obj) created from reading a json file and uses it
to populate the given document with model data.
Args:
document:
obj:
emit_signals: whether to signal views
Raises:
IOError, AssertionError, TypeError
"""
num_bases = len(obj['vstrands'][0]['scaf'])
if num_bases % 32 == 0:
lattice_type = LatticeEnum.SQUARE
grid_type = GridEnum.SQUARE
elif num_bases % 21 == 0:
lattice_type = LatticeEnum.HONEYCOMB
grid_type = GridEnum.HONEYCOMB
else:
raise IOError("error decoding number of bases")
part = None
# DETERMINE MAX ROW,COL
max_row_json = max_col_json = 0
for helix in obj['vstrands']:
max_row_json = max(max_row_json, int(helix['row'])+1)
max_col_json = max(max_col_json, int(helix['col'])+1)
# CREATE PART ACCORDING TO LATTICE TYPE
if lattice_type == LatticeEnum.HONEYCOMB:
doLattice = HoneycombDnaPart.legacyLatticeCoordToPositionXY
isEven = HoneycombDnaPart.isEvenParity
elif lattice_type == LatticeEnum.SQUARE:
doLattice = SquareDnaPart.legacyLatticeCoordToPositionXY
isEven = SquareDnaPart.isEvenParity
else:
raise TypeError("Lattice type not recognized")
part = document.createNucleicAcidPart(grid_type=grid_type, use_undostack=False)
part.setActive(True)
document.setGridType(grid_type)
document.setSliceOrGridViewVisible(OrthoViewEnum.SLICE)
setBatch(True)
# POPULATE VIRTUAL HELICES
ordered_id_list = []
vh_num_to_coord = {}
min_row, max_row = 10000, -10000
min_col, max_col = 10000, -10000
# find row, column limits
for helix in obj['vstrands']:
row = helix['row']
if row < min_row:
min_row = row
if row > max_row:
max_row = row
col = helix['col']
if col < min_col:
min_col = col
if col > max_col:
max_col = col
# end for
delta_row = (max_row + min_row) // 2
# # 2 LINES COMMENTED OUT BY NC, doesn't appear to be necessary for honeycomb
# if delta_row & 0:
if delta_row & 1:
delta_row += 1
delta_column = (max_col + min_col) // 2
# if delta_column & 0:
if delta_column & 1:
delta_column += 1
print("Found cadnano version 2 file")
# print("\trows(%d, %d): avg: %d" % (min_row, max_row, delta_row))
# print("\tcolumns(%d, %d): avg: %d" % (min_col, max_col, delta_column))
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf = helix['scaf']
# align row and columns to the center 0, 0
if HoneycombDnaPart.isEvenParity(row, col):
coord = (row - delta_row, col - delta_column)
else:
coord = (row - delta_row, col - delta_column)
vh_num_to_coord[vh_num] = coord
ordered_id_list.append(vh_num)
# end for
# make sure we retain the original order
radius = DEFAULT_RADIUS
for vh_num in sorted(vh_num_to_coord.keys()):
row, col = vh_num_to_coord[vh_num]
x, y = doLattice(radius, row, col)
part.createVirtualHelix(x, y, 0., num_bases,
id_num=vh_num, use_undostack=False)
# zoom to fit
if emit_signals:
part.partZDimensionsChangedSignal.emit(part, *part.zBoundsIds(), True)
if not getReopen():
setBatch(False)
part.setImportedVHelixOrder(ordered_id_list)
setReopen(False)
setBatch(False)
# INSTALL STRANDS AND COLLECT XOVER LOCATIONS
scaf_seg = defaultdict(list)
scaf_xo = defaultdict(list)
stap_seg = defaultdict(list)
stap_xo = defaultdict(list)
try:
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
if isEven(row, col):
scaf_strand_set, stap_strand_set = part.getStrandSets(vh_num)
else:
stap_strand_set, scaf_strand_set = part.getStrandSets(vh_num)
# validate file serialization of lists
assert(len(scaf) == len(stap) and
len(scaf) == len(insertions) and
len(insertions) == len(skips))
# read scaffold segments and xovers
for i in range(len(scaf)):
five_vh, five_idx, three_vh, three_idx = scaf[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandEnum.SCAFFOLD, vh_num, i, five_vh,
five_idx, three_vh, three_idx):
scaf_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
scaf_seg[vh_num].append(i) # end segment on a double crossover
if is3primeXover(StrandEnum.SCAFFOLD, vh_num, i, three_vh, three_idx):
scaf_xo[vh_num].append((i, three_vh, three_idx))
assert (len(scaf_seg[vh_num]) % 2 == 0)
# install scaffold segments
for i in range(0, len(scaf_seg[vh_num]), 2):
low_idx = scaf_seg[vh_num][i]
high_idx = scaf_seg[vh_num][i + 1]
scaf_strand_set.createStrand(low_idx, high_idx, use_undostack=False)
# read staple segments and xovers
for i in range(len(stap)):
five_vh, five_idx, three_vh, three_idx = stap[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandEnum.STAPLE, vh_num, i, five_vh,
five_idx, three_vh, three_idx):
stap_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
stap_seg[vh_num].append(i) # end segment on a double crossover
if is3primeXover(StrandEnum.STAPLE, vh_num, i, three_vh, three_idx):
stap_xo[vh_num].append((i, three_vh, three_idx))
assert (len(stap_seg[vh_num]) % 2 == 0)
# install staple segments
for i in range(0, len(stap_seg[vh_num]), 2):
low_idx = stap_seg[vh_num][i]
high_idx = stap_seg[vh_num][i + 1]
stap_strand_set.createStrand(low_idx, high_idx, use_undostack=False)
part.refreshSegments(vh_num)
# end for
except AssertionError:
print("Unrecognized file format.")
raise
# INSTALL XOVERS
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
if isEven(row, col):
scaf_strand_set, stap_strand_set = part.getStrandSets(vh_num)
else:
stap_strand_set, scaf_strand_set = part.getStrandSets(vh_num)
# install scaffold xovers
for (idx5p, to_vh_num, idx3p) in scaf_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
try:
strand5p = scaf_strand_set.getStrand(idx5p)
except Exception:
print(vh_num, idx5p)
print(scaf_strand_set.strand_heap)
print(stap_strand_set.strand_heap)
raise
coord = vh_num_to_coord[to_vh_num]
if isEven(*coord):
to_scaf_strand_set, to_stap_strand_set = part.getStrandSets(to_vh_num)
else:
to_stap_strand_set, to_scaf_strand_set = part.getStrandSets(to_vh_num)
strand3p = to_scaf_strand_set.getStrand(idx3p)
part.createXover(strand5p, idx5p,
strand3p, idx3p,
allow_reordering=True,
update_oligo=False,
use_undostack=False)
# install staple xovers
for (idx5p, to_vh_num, idx3p) in stap_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
strand5p = stap_strand_set.getStrand(idx5p)
coord = vh_num_to_coord[to_vh_num]
if isEven(*coord):
to_scaf_strand_set, to_stap_strand_set = part.getStrandSets(to_vh_num)
else:
to_stap_strand_set, to_scaf_strand_set = part.getStrandSets(to_vh_num)
strand3p = to_stap_strand_set.getStrand(idx3p)
part.createXover(strand5p, idx5p,
strand3p, idx3p,
allow_reordering=True,
update_oligo=False,
use_undostack=False)
# need to heal all oligo connections into a continuous
# oligo for the next steps
RefreshOligosCommand(part).redo()
# COLORS, INSERTIONS, SKIPS
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
if isEven(row, col):
scaf_strand_set, stap_strand_set = part.getStrandSets(vh_num)
else:
stap_strand_set, scaf_strand_set = part.getStrandSets(vh_num)
# install insertions and skips
for base_idx in range(len(stap)):
sum_of_insert_skip = insertions[base_idx] + skips[base_idx]
if sum_of_insert_skip != 0:
strand = scaf_strand_set.getStrand(base_idx)
strand.addInsertion(base_idx,
sum_of_insert_skip,
use_undostack=False)
# end for
# populate colors
for base_idx, color_number in helix['stap_colors']:
color = intToColorHex(color_number)
strand = stap_strand_set.getStrand(base_idx)
strand.oligo().applyColor(color, use_undostack=False)
if 'oligos' in obj:
for oligo in obj['oligos']:
vh_num = oligo['vh_num']
idx = oligo['idx']
seq = str(oligo['seq']) if oligo['seq'] is not None else ''
if seq != '':
coord = vh_num_to_coord[vh_num]
if isEven(*coord):
scaf_ss, stap_ss = part.getStrandSets(vh_num)
else:
stap_ss, scaf_ss = part.getStrandSets(vh_num)
strand = scaf_ss.getStrand(idx)
# print "sequence", seq, vh, idx, strand.oligo()._strand5p
strand.oligo().applySequence(seq, use_undostack=False)
if 'modifications' in obj:
for mod_id, item in obj['modifications'].items():
if mod_id != 'int_instances' and mod_id != 'ext_instances':
part.createMod(item, mod_id)
for key, mid in obj['modifications']['ext_instances'].items():
# strand, idx, coord, isstaple = part.getModStrandIdx(key)
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(document, mid, idx, use_undostack=False)
except Exception:
print(strand, idx)
raise
for key, mid in obj['modifications']['int_instances'].items():
# strand, idx, coord, isstaple = part.getModStrandIdx(key)
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(document, mid, idx, use_undostack=False)
except Exception:
print(strand, idx)
raise
def decode(document: DocT, obj: dict, emit_signals: bool = True):
"""Parses a dictionary (obj) created from reading a json file and uses it
to populate the given document with model data.
Args:
document:
obj:
emit_signals: whether to signal views
Raises:
AssertionError, TypeError
"""
num_bases = len(obj['vstrands'][0]['fwd_ss'])
lattice_type = LatticeEnum.HONEYCOMB
part = None
# DETERMINE MAX ROW,COL
max_row_json = max_col_json = 0
for helix in obj['vstrands']:
max_row_json = max(max_row_json, int(helix['row']) + 1)
max_col_json = max(max_col_json, int(helix['col']) + 1)
# CREATE PART ACCORDING TO LATTICE TYPE
if lattice_type == LatticeEnum.HONEYCOMB:
doLattice = HoneycombDnaPart.latticeCoordToModelXY
isEven = HoneycombDnaPart.isEvenParity
grid_type = GridEnum.HONEYCOMB
elif lattice_type == LatticeEnum.SQUARE:
doLattice = SquareDnaPart.latticeCoordToModelXY
isEven = SquareDnaPart.isEvenParity
grid_type = GridEnum.SQUARE
else:
raise TypeError("Lattice type not recognized")
part = document.createNucleicAcidPart( use_undostack=False,
is_lattice=True,
grid_type=grid_type)
part.setActive(True)
setBatch(True)
# POPULATE VIRTUAL HELICES
ordered_id_list = []
property_dict = {}
vh_num_to_coord = {}
min_row, max_row = 10000, -10000
min_col, max_col = 10000, -10000
# find row, column limits
for helix in obj['vstrands']:
row = helix['row']
if row < min_row:
min_row = row
if row > max_row:
max_row = row
col = helix['col']
if col < min_col:
min_col = col
if col > max_col:
max_col = col
# end for
delta_row = (max_row + min_row) // 2
if delta_row & 1:
delta_row += 1
delta_column = (max_col + min_col) // 2
if delta_column & 1:
delta_column += 1
# print("Found cadnano version 2.5 file")
# print("\trows(%d, %d): avg: %d" % (min_row, max_row, delta_row))
# print("\tcolumns(%d, %d): avg: %d" % (min_col, max_col, delta_column))
encoded_keys = ['eulerZ', 'repeats', 'bases_per_repeat',
'turns_per_repeat', 'z']
model_keys = ['eulerZ', 'repeat_hint', 'bases_per_repeat',
'turns_per_repeat', 'z']
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
# align row and columns to the center 0, 0
coord = (row - delta_row, col - delta_column)
vh_num_to_coord[vh_num] = coord
ordered_id_list.append(vh_num)
property_dict[vh_num] = [helix[key] for key in encoded_keys]
# end for
radius = DEFAULT_RADIUS
for vh_num in sorted(vh_num_to_coord.keys()):
row, col = vh_num_to_coord[vh_num]
x, y = doLattice(radius, row, col)
props = property_dict[vh_num]
z = convertToModelZ(props[-1])
props[-1] = z
# print("%d:" % vh_num, x, y, z)
# print({k:v for k, v in zip(encoded_keys, props)})
part.createVirtualHelix(x, y, z, num_bases,
id_num=vh_num,
properties=(model_keys, props),
use_undostack=False)
if not getReopen():
setBatch(False)
part.setImportedVHelixOrder(ordered_id_list)
# zoom to fit
if emit_signals:
part.partZDimensionsChangedSignal.emit(part, *part.zBoundsIds(), True)
setReopen(False)
setBatch(False)
# INSTALL STRANDS AND COLLECT XOVER LOCATIONS
fwd_ss_seg = defaultdict(list)
fwd_ss_xo = defaultdict(list)
rev_ss_seg = defaultdict(list)
rev_ss_xo = defaultdict(list)
try:
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
insertions = helix['insertions']
deletions = helix['deletions']
if isEven(row, col):
# parity matters still despite the fwd and rev naming of
# this format
fwd_strandset, rev_strandset = part.getStrandSets(vh_num)
fwd_ss = helix['fwd_ss']
rev_ss = helix['rev_ss']
else:
rev_strandset, fwd_strandset = part.getStrandSets(vh_num)
rev_ss = helix['fwd_ss']
fwd_ss = helix['rev_ss']
# validate file serialization of lists
assert(len(fwd_ss) == len(rev_ss) and
len(fwd_ss) == len(insertions) and
len(insertions) == len(deletions))
# read fwd_strandset segments and xovers
for i in range(len(fwd_ss)):
five_vh, five_strand, five_idx, three_vh, three_strand, three_idx = fwd_ss[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandEnum.SCAFFOLD, vh_num, i,
five_vh, five_idx, three_vh, three_idx):
fwd_ss_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
fwd_ss_seg[vh_num].append(i) # end segment on a double crossover
if is3primeXover(StrandEnum.SCAFFOLD, vh_num, i, three_vh, three_idx):
fwd_ss_xo[vh_num].append((i, three_vh, three_strand, three_idx))
assert (len(fwd_ss_seg[vh_num]) % 2 == 0)
# install fwd_strandset segments
for i in range(0, len(fwd_ss_seg[vh_num]), 2):
low_idx = fwd_ss_seg[vh_num][i]
high_idx = fwd_ss_seg[vh_num][i + 1]
fwd_strandset.createStrand(low_idx, high_idx, use_undostack=False)
# read rev_strandset segments and xovers
for i in range(len(rev_ss)):
five_vh, five_strand, five_idx, three_vh, three_strand, three_idx = rev_ss[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandEnum.STAPLE, vh_num, i,
five_vh, five_idx, three_vh, three_idx):
rev_ss_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
rev_ss_seg[vh_num].append(i) # end segment on a double crossover
if is3primeXover(StrandEnum.STAPLE, vh_num, i, three_vh, three_idx):
rev_ss_xo[vh_num].append((i, three_vh, three_strand, three_idx))
assert (len(rev_ss_seg[vh_num]) % 2 == 0)
# install rev_strandset segments
for i in range(0, len(rev_ss_seg[vh_num]), 2):
low_idx = rev_ss_seg[vh_num][i]
high_idx = rev_ss_seg[vh_num][i + 1]
rev_strandset.createStrand(low_idx, high_idx, use_undostack=False)
part.refreshSegments(vh_num)
# end for
except AssertionError:
print("Unrecognized file format.")
raise
""" INSTALL XOVERS
parity matters for the from idx but is already encoded in
the `to_strand3p` parameter of the tuple in `fwd_ss_xo` and `rev_ss_xo`
"""
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
if isEven(row, col):
fwd_strandset, rev_strandset = part.getStrandSets(vh_num)
else:
rev_strandset, fwd_strandset = part.getStrandSets(vh_num)
# install fwd_strandset xovers
for (idx5p, to_vh_num, to_strand3p, idx3p) in fwd_ss_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
strand5p = fwd_strandset.getStrand(idx5p)
to_fwd_strandset, to_rev_strandset = part.getStrandSets(to_vh_num)
if to_strand3p == 0:
strand3p = to_fwd_strandset.getStrand(idx3p)
else:
strand3p = to_rev_strandset.getStrand(idx3p)
part.createXover(strand5p, idx5p,
strand3p, idx3p,
allow_reordering=True,
update_oligo=False,
use_undostack=False)
# install rev_strandset xovers
for (idx5p, to_vh_num, to_strand3p, idx3p) in rev_ss_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
strand5p = rev_strandset.getStrand(idx5p)
to_fwd_strandset, to_rev_strandset = part.getStrandSets(to_vh_num)
coord = vh_num_to_coord[to_vh_num]
if to_strand3p == 0:
strand3p = to_fwd_strandset.getStrand(idx3p)
else:
strand3p = to_rev_strandset.getStrand(idx3p)
part.createXover(strand5p, idx5p,
strand3p, idx3p,
allow_reordering=True,
update_oligo=False,
use_undostack=False)
# need to heal all oligo connections into a continuous
# oligo for the next steps
RefreshOligosCommand(part).redo()
# COLORS, INSERTIONS, deletions
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
fwd_ss = helix['fwd_ss']
rev_ss = helix['rev_ss']
insertions = helix['insertions']
deletions = helix['deletions']
fwd_strandset, rev_strandset = part.getStrandSets(vh_num)
# install insertions and deletions
for base_idx in range(len(rev_ss)):
sum_of_insert_deletion = insertions[base_idx] + deletions[base_idx]
if sum_of_insert_deletion != 0:
strand = fwd_strandset.getStrand(base_idx)
strand.addInsertion(base_idx,
sum_of_insert_deletion,
use_undostack=False)
# end for
# populate colors
for strand_type, base_idx, color in helix['colors']:
strandset = fwd_strandset if strand_type == 0 else rev_strandset
strand = strandset.getStrand(base_idx)
strand.oligo().applyColor(color, use_undostack=False)
if 'oligos' in obj:
for oligo in obj['oligos']:
vh_num = oligo['vh_num']
idx = oligo['idx']
seq = str(oligo['seq']) if oligo['seq'] is not None else ''
if seq != '':
coord = vh_num_to_coord[vh_num]
fwd_strandset, rev_strandset = part.getStrandSets(vh_num)
strand = fwd_strandset.getStrand(idx)
strand.oligo().applySequence(seq, use_undostack=False)
if 'modifications' in obj:
for mod_id, item in obj['modifications'].items():
if mod_id != 'int_instances' and mod_id != 'ext_instances':
part.createMod(item, mod_id)
for key, mid in obj['modifications']['ext_instances'].items():
# strand, idx, coord, isstaple = part.getModStrandIdx(key)
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(document, mid, idx, use_undostack=False)
except Exception:
print(strand, idx)
raise
for key in obj['modifications']['int_instances'].items():
# strand, idx, coord, isstaple = part.getModStrandIdx(key)
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(document, mid, idx, use_undostack=False)
except Exception:
print(strand, idx)
raise
def decode(document, obj, emit_signals=True):
"""
Parses a dictionary (obj) created from reading a json file and uses it
to populate the given document with model data.
"""
num_bases = len(obj['vstrands'][0]['fwd_ss'])
lattice_type = LatticeType.HONEYCOMB
part = None
# DETERMINE MAX ROW,COL
max_row_json = max_col_json = 0
for helix in obj['vstrands']:
max_row_json = max(max_row_json, int(helix['row']) + 1)
max_col_json = max(max_col_json, int(helix['col']) + 1)
# CREATE PART ACCORDING TO LATTICE TYPE
if lattice_type == LatticeType.HONEYCOMB:
doLattice = HoneycombDnaPart.latticeCoordToPositionXY
isEven = HoneycombDnaPart.isEvenParity
elif lattice_type == LatticeType.SQUARE:
doLattice = SquareDnaPart.latticeCoordToPositionXY
isEven = SquareDnaPart.isEvenParity
else:
raise TypeError("Lattice type not recognized")
part = document.createNucleicAcidPart(use_undostack=False)
part.setActive(True)
setBatch(True)
# POPULATE VIRTUAL HELICES
ordered_id_list = []
property_dict = {}
vh_num_to_coord = {}
min_row, max_row = 10000, -10000
min_col, max_col = 10000, -10000
# find row, column limits
for helix in obj['vstrands']:
row = helix['row']
if row < min_row:
min_row = row
if row > max_row:
max_row = row
col = helix['col']
if col < min_col:
min_col = col
if col > max_col:
max_col = col
# end for
delta_row = (max_row + min_row) // 2
if delta_row & 1:
delta_row += 1
delta_column = (max_col + min_col) // 2
if delta_column & 1:
delta_column += 1
# print("Found cadnano version 2.5 file")
# print("\trows(%d, %d): avg: %d" % (min_row, max_row, delta_row))
# print("\tcolumns(%d, %d): avg: %d" % (min_col, max_col, delta_column))
encoded_keys = [
'eulerZ', 'repeats', 'bases_per_repeat', 'turns_per_repeat', 'z'
]
model_keys = [
'eulerZ', 'repeat_hint', 'bases_per_repeat', 'turns_per_repeat', 'z'
]
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
# align row and columns to the center 0, 0
coord = (row - delta_row, col - delta_column)
vh_num_to_coord[vh_num] = coord
ordered_id_list.append(vh_num)
property_dict[vh_num] = [helix[key] for key in encoded_keys]
# end for
radius = DEFAULT_RADIUS
for vh_num in sorted(vh_num_to_coord.keys()):
row, col = vh_num_to_coord[vh_num]
x, y = doLattice(radius, row, col)
props = property_dict[vh_num]
z = convertToModelZ(props[-1])
props[-1] = z
# print("%d:" % vh_num, x, y, z)
# print({k:v for k, v in zip(encoded_keys, props)})
part.createVirtualHelix(x,
y,
z,
num_bases,
id_num=vh_num,
properties=(model_keys, props),
use_undostack=False)
if not getReopen():
setBatch(False)
part.setImportedVHelixOrder(ordered_id_list)
# zoom to fit
if emit_signals:
part.partZDimensionsChangedSignal.emit(part, *part.zBoundsIds(), True)
setReopen(False)
setBatch(False)
# INSTALL STRANDS AND COLLECT XOVER LOCATIONS
fwd_ss_seg = defaultdict(list)
fwd_ss_xo = defaultdict(list)
rev_ss_seg = defaultdict(list)
rev_ss_xo = defaultdict(list)
try:
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
insertions = helix['insertions']
deletions = helix['deletions']
if isEven(row, col):
# parity matters still despite the fwd and rev naming of
# this format
fwd_strandset, rev_strandset = part.getStrandSets(vh_num)
fwd_ss = helix['fwd_ss']
rev_ss = helix['rev_ss']
else:
rev_strandset, fwd_strandset = part.getStrandSets(vh_num)
rev_ss = helix['fwd_ss']
fwd_ss = helix['rev_ss']
# validate file serialization of lists
assert (len(fwd_ss) == len(rev_ss)
and len(fwd_ss) == len(insertions)
and len(insertions) == len(deletions))
# read fwd_strandset segments and xovers
for i in range(len(fwd_ss)):
five_vh, five_strand, five_idx, three_vh, three_strand, three_idx = fwd_ss[
i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandType.SCAFFOLD, vh_num, i, five_vh,
five_idx, three_vh, three_idx):
fwd_ss_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
fwd_ss_seg[vh_num].append(
i) # end segment on a double crossover
if is3primeXover(StrandType.SCAFFOLD, vh_num, i, three_vh,
three_idx):
fwd_ss_xo[vh_num].append(
(i, three_vh, three_strand, three_idx))
assert (len(fwd_ss_seg[vh_num]) % 2 == 0)
# install fwd_strandset segments
for i in range(0, len(fwd_ss_seg[vh_num]), 2):
low_idx = fwd_ss_seg[vh_num][i]
high_idx = fwd_ss_seg[vh_num][i + 1]
fwd_strandset.createStrand(low_idx,
high_idx,
use_undostack=False)
# read rev_strandset segments and xovers
for i in range(len(rev_ss)):
five_vh, five_strand, five_idx, three_vh, three_strand, three_idx = rev_ss[
i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandType.STAPLE, vh_num, i, five_vh,
five_idx, three_vh, three_idx):
rev_ss_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
rev_ss_seg[vh_num].append(
i) # end segment on a double crossover
if is3primeXover(StrandType.STAPLE, vh_num, i, three_vh,
three_idx):
rev_ss_xo[vh_num].append(
(i, three_vh, three_strand, three_idx))
assert (len(rev_ss_seg[vh_num]) % 2 == 0)
# install rev_strandset segments
for i in range(0, len(rev_ss_seg[vh_num]), 2):
low_idx = rev_ss_seg[vh_num][i]
high_idx = rev_ss_seg[vh_num][i + 1]
rev_strandset.createStrand(low_idx,
high_idx,
use_undostack=False)
part.refreshSegments(vh_num)
# end for
except AssertionError:
print("Unrecognized file format.")
raise
""" INSTALL XOVERS
parity matters for the from idx but is already encoded in
the `to_strand3p` parameter of the tuple in `fwd_ss_xo` and `rev_ss_xo`
"""
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
if isEven(row, col):
fwd_strandset, rev_strandset = part.getStrandSets(vh_num)
else:
rev_strandset, fwd_strandset = part.getStrandSets(vh_num)
# install fwd_strandset xovers
for (idx5p, to_vh_num, to_strand3p, idx3p) in fwd_ss_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
strand5p = fwd_strandset.getStrand(idx5p)
to_fwd_strandset, to_rev_strandset = part.getStrandSets(to_vh_num)
if to_strand3p == 0:
strand3p = to_fwd_strandset.getStrand(idx3p)
else:
strand3p = to_rev_strandset.getStrand(idx3p)
part.createXover(strand5p,
idx5p,
strand3p,
idx3p,
allow_reordering=True,
update_oligo=False,
use_undostack=False)
# install rev_strandset xovers
for (idx5p, to_vh_num, to_strand3p, idx3p) in rev_ss_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
strand5p = rev_strandset.getStrand(idx5p)
to_fwd_strandset, to_rev_strandset = part.getStrandSets(to_vh_num)
coord = vh_num_to_coord[to_vh_num]
if to_strand3p == 0:
strand3p = to_fwd_strandset.getStrand(idx3p)
else:
strand3p = to_rev_strandset.getStrand(idx3p)
part.createXover(strand5p,
idx5p,
strand3p,
idx3p,
allow_reordering=True,
update_oligo=False,
use_undostack=False)
# need to heal all oligo connections into a continuous
# oligo for the next steps
RefreshOligosCommand(part).redo()
# COLORS, INSERTIONS, deletions
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
fwd_ss = helix['fwd_ss']
rev_ss = helix['rev_ss']
insertions = helix['insertions']
deletions = helix['deletions']
fwd_strandset, rev_strandset = part.getStrandSets(vh_num)
# install insertions and deletions
for base_idx in range(len(rev_ss)):
sum_of_insert_deletion = insertions[base_idx] + deletions[base_idx]
if sum_of_insert_deletion != 0:
strand = fwd_strandset.getStrand(base_idx)
strand.addInsertion(base_idx,
sum_of_insert_deletion,
use_undostack=False)
# end for
# populate colors
for strand_type, base_idx, color in helix['colors']:
strandset = fwd_strandset if strand_type == 0 else rev_strandset
strand = strandset.getStrand(base_idx)
strand.oligo().applyColor(color, use_undostack=False)
if 'oligos' in obj:
for oligo in obj['oligos']:
vh_num = oligo['vh_num']
idx = oligo['idx']
seq = str(oligo['seq']) if oligo['seq'] is not None else ''
if seq != '':
coord = vh_num_to_coord[vh_num]
fwd_strandset, rev_strandset = part.getStrandSets(vh_num)
strand = fwd_strandset.getStrand(idx)
strand.oligo().applySequence(seq, use_undostack=False)
if 'modifications' in obj:
for mod_id, item in obj['modifications'].items():
if mod_id != 'int_instances' and mod_id != 'ext_instances':
part.createMod(item, mod_id)
for key, mid in obj['modifications']['ext_instances'].items():
# strand, idx, coord, isstaple = part.getModStrandIdx(key)
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(document, mid, idx, use_undostack=False)
except Exception:
print(strand, idx)
raise
for key in obj['modifications']['int_instances'].items():
# strand, idx, coord, isstaple = part.getModStrandIdx(key)
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(document, mid, idx, use_undostack=False)
except Exception:
print(strand, idx)
raise
def decode(document, obj):
"""
Parses a dictionary (obj) created from reading a json file and uses it
to populate the given document with model data.
"""
num_bases = len(obj['vstrands'][0]['scaf'])
if num_bases % 32 == 0:
lattice_type = LatticeType.SQUARE
elif num_bases % 21 == 0:
lattice_type = LatticeType.HONEYCOMB
else:
raise IOError("error decoding number of bases")
# DETERMINE MAX ROW,COL
max_row_json = max_col_json = 0
for helix in obj['vstrands']:
max_row_json = max(max_row_json, int(helix['row']) + 1)
max_col_json = max(max_col_json, int(helix['col']) + 1)
# CREATE PART ACCORDING TO LATTICE TYPE
if lattice_type == LatticeType.HONEYCOMB:
steps = num_bases // 21
# num_rows = max(30, max_row_json, cadnano.app().prefs.honeycombRows)
# num_cols = max(32, max_col_json, cadnano.app().prefs.honeycombCols)
num_rows = max(30, max_row_json, prefs.HONEYCOMB_PART_MAXROWS)
num_cols = max(32, max_col_json, prefs.HONEYCOMB_PART_MAXCOLS)
part = document.addHoneycombPart(num_rows, num_cols, steps)
elif lattice_type == LatticeType.SQUARE:
is_SQ_100 = True # check for custom SQ100 format
for helix in obj['vstrands']:
if helix['col'] != 0:
is_SQ_100 = False
break
if is_SQ_100:
# num_rows, num_cols = 100, 1
num_rows, num_cols = 40, 30
else:
num_rows, num_cols = 40, 30
steps = num_bases // 32
# num_rows = max(30, max_row_json, cadnano.app().prefs.squareRows)
# num_cols = max(32, max_col_json, cadnano.app().prefs.squareCols)
num_rows = max(30, max_row_json, prefs.SQUARE_PART_MAXROWS)
num_cols = max(32, max_col_json, prefs.SQUARE_PART_MAXCOLS)
part = document.addSquarePart(num_rows, num_cols, steps)
# part = SquarePart(document=document, max_row=num_rows, max_col=num_cols, max_steps=steps)
else:
raise TypeError("Lattice type not recognized")
# document._addPart(part, use_undostack=False)
setBatch(True)
# POPULATE VIRTUAL HELICES
ordered_coord_list = []
vh_num_to_coord = {}
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf = helix['scaf']
coord = (row, col)
vh_num_to_coord[vh_num] = coord
ordered_coord_list.append(coord)
# make sure we retain the original order
for vh_num in sorted(vh_num_to_coord.keys()):
row, col = vh_num_to_coord[vh_num]
part.createVirtualHelix(row, col, use_undostack=False)
if not getReopen():
setBatch(False)
part.setImportedVHelixOrder(ordered_coord_list)
setReopen(False)
setBatch(False)
# INSTALL STRANDS AND COLLECT XOVER LOCATIONS
num_helices = len(obj['vstrands']) - 1
scaf_seg = defaultdict(list)
scaf_xo = defaultdict(list)
stap_seg = defaultdict(list)
stap_xo = defaultdict(list)
try:
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
vh = part.virtualHelixAtCoord((row, col))
scaf_strand_set = vh.scaffoldStrandSet()
stap_strand_set = vh.stapleStrandSet()
assert(len(scaf) == len(stap) and len(stap) == part.maxBaseIdx() + 1 and\
len(scaf) == len(insertions) and len(insertions) == len(skips))
# read scaffold segments and xovers
for i in range(len(scaf)):
five_vh, five_idx, three_vh, three_idx = scaf[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandType.SCAFFOLD, vh_num, i, five_vh,\
five_idx, three_vh, three_idx):
scaf_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
scaf_seg[vh_num].append(
i) # end segment on a double crossover
if is3primeXover(StrandType.SCAFFOLD, vh_num, i, three_vh,
three_idx):
scaf_xo[vh_num].append((i, three_vh, three_idx))
assert (len(scaf_seg[vh_num]) % 2 == 0)
# install scaffold segments
for i in range(0, len(scaf_seg[vh_num]), 2):
low_idx = scaf_seg[vh_num][i]
high_idx = scaf_seg[vh_num][i + 1]
scaf_strand_set.createStrand(low_idx,
high_idx,
use_undostack=False)
# read staple segments and xovers
for i in range(len(stap)):
five_vh, five_idx, three_vh, three_idx = stap[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandType.STAPLE, vh_num, i, five_vh,\
five_idx, three_vh, three_idx):
stap_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
stap_seg[vh_num].append(
i) # end segment on a double crossover
if is3primeXover(StrandType.STAPLE, vh_num, i, three_vh,
three_idx):
stap_xo[vh_num].append((i, three_vh, three_idx))
assert (len(stap_seg[vh_num]) % 2 == 0)
# install staple segments
for i in range(0, len(stap_seg[vh_num]), 2):
low_idx = stap_seg[vh_num][i]
high_idx = stap_seg[vh_num][i + 1]
stap_strand_set.createStrand(low_idx,
high_idx,
use_undostack=False)
except AssertionError:
print("Unrecognized file format.")
raise
# INSTALL XOVERS
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
from_vh = part.virtualHelixAtCoord((row, col))
scaf_strand_set = from_vh.scaffoldStrandSet()
stap_strand_set = from_vh.stapleStrandSet()
# install scaffold xovers
for (idx5p, to_vh_num, idx3p) in scaf_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
strand5p = scaf_strand_set.getStrand(idx5p)
to_vh = part.virtualHelixAtCoord(vh_num_to_coord[to_vh_num])
strand3p = to_vh.scaffoldStrandSet().getStrand(idx3p)
part.createXover(strand5p,
idx5p,
strand3p,
idx3p,
update_oligo=False,
use_undostack=False)
# install staple xovers
for (idx5p, to_vh_num, idx3p) in stap_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
strand5p = stap_strand_set.getStrand(idx5p)
to_vh = part.virtualHelixAtCoord(vh_num_to_coord[to_vh_num])
strand3p = to_vh.stapleStrandSet().getStrand(idx3p)
part.createXover(strand5p,
idx5p,
strand3p,
idx3p,
update_oligo=False,
use_undostack=False)
# need to heal all oligo connections into a continuous
# oligo for the next steps
RefreshOligosCommand(part,
include_scaffold=True,
colors=(prefs.DEFAULT_SCAF_COLOR,
prefs.DEFAULT_STAP_COLOR)).redo()
# SET DEFAULT COLOR
# for oligo in part.oligos():
# if oligo.isStaple():
# default_color = prefs.DEFAULT_STAP_COLOR
# else:
# default_color = prefs.DEFAULT_SCAF_COLOR
# oligo.applyColor(default_color, use_undostack=False)
# COLORS, INSERTIONS, SKIPS
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
vh = part.virtualHelixAtCoord((row, col))
scaf_strand_set = vh.scaffoldStrandSet()
stap_strand_set = vh.stapleStrandSet()
# install insertions and skips
for base_idx in range(len(stap)):
sum_of_insert_skip = insertions[base_idx] + skips[base_idx]
if sum_of_insert_skip != 0:
strand = scaf_strand_set.getStrand(base_idx)
strand.addInsertion(base_idx,
sum_of_insert_skip,
use_undostack=False)
# end for
# populate colors
for base_idx, color_number in helix['stap_colors']:
color = Color((color_number >> 16) & 0xFF,
(color_number >> 8) & 0xFF,
color_number & 0xFF).name()
strand = stap_strand_set.getStrand(base_idx)
strand.oligo().applyColor(color, use_undostack=False)
if 'oligos' in obj:
for oligo in obj['oligos']:
vh_num = oligo['vh_num']
idx = oligo['idx']
seq = str(oligo['seq']) if oligo['seq'] is not None else ''
if seq != '':
coord = vh_num_to_coord[vhNum]
vh = part.virtualHelixAtCoord(coord)
scaf_ss = vh.scaffoldStrandSet()
# stapStrandSet = vh.stapleStrandSet()
strand = scaf_ss.getStrand(idx)
# print "sequence", seq, vh, idx, strand.oligo()._strand5p
strand.oligo().applySequence(seq, use_undostack=False)
if 'modifications' in obj:
# print("AD", cadnano.app().activeDocument)
# win = cadnano.app().activeDocument.win
# modstool = win.pathToolManager.modsTool
# modstool.connectSignals(part)
for mod_id, item in obj['modifications'].items():
if mod_id != 'int_instances' and mod_id != 'ext_instances':
part.createMod(item, mod_id)
for key, mid in obj['modifications']['ext_instances'].items():
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(mid, idx, use_undostack=False)
except:
print(strand, idx)
raise
for key in obj['modifications']['int_instances'].items():
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(mid, idx, use_undostack=False)
except:
print(strand, idx)
raise
def decode(document,obj):
num_bases = len(obj['vstrands'][0]['scaf'])
if num_bases % 32 == 0:
lattice_type = LatticeType.SQUARE
elif num_bases % 21 == 0:
lattice_type = LatticeType.HONEYCOMB
else:
raise IOError("error decoding number of bases")
# DETERMINE MAX ROW,COL
max_row_json = max_col_json = 0
for helix in obj['vstrands']:
max_row_json = max(max_row_json, int(helix['row'])+1)
max_col_json = max(max_col_json, int(helix['col'])+1)
# CREATE PART ACCORDING TO LATTICE TYPE
if lattice_type == LatticeType.HONEYCOMB:
steps = num_bases // 21
# num_rows = max(30, max_row_json, cadnano.app().prefs.honeycombRows)
# num_cols = max(32, max_col_json, cadnano.app().prefs.honeycombCols)
num_rows = max(30, max_row_json, prefs.HONEYCOMB_PART_MAXROWS)
num_cols = max(32, max_col_json, prefs.HONEYCOMB_PART_MAXCOLS)
part = document.addHoneycombPart(num_rows, num_cols, steps)
elif lattice_type == LatticeType.SQUARE:
is_SQ_100 = True # check for custom SQ100 format
for helix in obj['vstrands']:
if helix['col'] != 0:
is_SQ_100 = False
break
if is_SQ_100:
# num_rows, num_cols = 100, 1
num_rows, num_cols = 40, 30
else:
num_rows, num_cols = 40, 30
steps = num_bases // 32
# num_rows = max(30, max_row_json, cadnano.app().prefs.squareRows)
# num_cols = max(32, max_col_json, cadnano.app().prefs.squareCols)
num_rows = max(30, max_row_json, prefs.SQUARE_PART_MAXROWS)
num_cols = max(32, max_col_json, prefs.SQUARE_PART_MAXCOLS)
part = document.addSquarePart(num_rows, num_cols, steps)
# part = SquarePart(document=document, max_row=num_rows, max_col=num_cols, max_steps=steps)
else:
raise TypeError("Lattice type not recognized")
# document._addPart(part, use_undostack=False)
setBatch(True)
# POPULATE VIRTUAL HELICES
ordered_coord_list = []
vh_num_to_coord = {}
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
coord = (row, col)
vh_num_to_coord[vh_num] = coord
ordered_coord_list.append(coord)
# make sure we retain the original order
for vh_num in sorted(vh_num_to_coord.keys()):
row, col = vh_num_to_coord[vh_num]
part.createVirtualHelix(row, col, use_undostack=False)
if not getReopen():
setBatch(False)
part.setImportedVHelixOrder(ordered_coord_list)
setReopen(False)
setBatch(False)
num_helices = len(obj['vstrands']) - 1
scaf_seg = defaultdict(list)
scaf_xo = defaultdict(list)
stap_seg = defaultdict(list)
stap_xo = defaultdict(list)
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
vh = part.virtualHelixAtCoord((row, col))
scaf_strand_set = vh._scaf_strand_set
stap_strand_set = vh._stap_strand_set
# read scaf segments and xovers
for i in range(len(scaf)):
five_vh, five_idx, three_vh, three_idx = scaf[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandType.SCAFFOLD, vh_num, i, five_vh,\
five_idx, three_vh, three_idx):
scaf_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
scaf_seg[vh_num].append(i) # end segment on a double crossover
if is3primeXover(StrandType.SCAFFOLD, vh_num, i, three_vh, three_idx):
scaf_xo[vh_num].append((i, three_vh, three_idx))
# read staple segments and xovers; update stap .json
#TODO: Reem, you need to look here because this is where Amy added in the 5th element
#TODO: Reem, you might need to modify this to render existing toeholds in otracad .json files
for i in range(len(stap)):
five_vh, five_idx, three_vh, three_idx = stap[i]
'''
append a fifth element to coordinate list; if staple is hybridized to a scaffold
domain at the location, get the index of the scaffold domain on scaffold
strandset and append it; if not hybridized to any scaffold domain, append -1.
'''
if five_vh == -1 and three_vh == -1:
stap[i].append(-1) # null base, cannot hybridize to any domain
continue # null base
elif hybridized(scaf[i]): # true if hybridized to scaffold at the position
scafNum = getStrandIdx(i,scaf_seg,vh_num=vh_num) # get hybridized scaffold domain index
stap[i].append(scafNum)
if isSegmentStartOrEnd(StrandType.STAPLE, vh_num, i, five_vh,\
five_idx, three_vh, three_idx):
stap_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
stap_seg[vh_num].append(i) # end segment on a double crossover
if is3primeXover(StrandType.STAPLE, vh_num, i, three_vh, three_idx):
stap_xo[vh_num].append((i, three_vh, three_idx))
assert (len(stap_seg[vh_num]) % 2 == 0)
# update scaf .json, append hybridized strand index to coordinate
for i in range(len(scaf)):
five_vh, five_idx, three_vh, three_idx = scaf[i]
if five_vh == -1 and three_vh == -1:
scaf[i].append(-1)
continue # null base
elif hybridized(stap[i]):
stapNum = getStrandIdx(i,stap_seg,vh_num=vh_num)
scaf[i].append(stapNum)
new_scaf_seg = []
# install scaffold segments
#TODO: Reem, whenever you see install, this is adding/rendering objects
for i in range(0, len(scaf_seg[vh_num]), 2):
low_idx = scaf_seg[vh_num][i]
high_idx = scaf_seg[vh_num][i + 1]
# split scaffold domain based on staple domain hybridized to
installStrandSet(low_idx,high_idx,scaf,scaf_strand_set,new_scaf_seg)
new_stap_seg = []
#install staple segments
for i in range(0, len(stap_seg[vh_num]), 2):
low_idx = stap_seg[vh_num][i]
high_idx = stap_seg[vh_num][i + 1]
# split staple domain based on scaffold domain hybridized to
installStrandSet(low_idx,high_idx,stap,stap_strand_set,new_stap_seg)
# rename staple based on complement domain on scaffold
for domain in vh._stap_strand_set:
stap_idx = domain._low_idx
scaf_domain_idx = getStrandIdx(stap_idx,new_scaf_seg)
if scaf_domain_idx is not None:
domain.setName(scaf_domain_idx)
else:
domain.setName(-1) #Inner-staple single-stranded region
# INSTALL XOVERS
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
from_vh = part.virtualHelixAtCoord((row, col))
scaf_strand_set = from_vh.scaffoldStrandSet()
stap_strand_set = from_vh.stapleStrandSet()
# install scaffold xovers
for (idx5p, to_vh_num, idx3p) in scaf_xo[vh_num]:
strand5p = scaf_strand_set.getStrand(idx5p)
to_vh = part.virtualHelixAtCoord(vh_num_to_coord[to_vh_num])
strand3p = to_vh.scaffoldStrandSet().getStrand(idx3p)
assert strand5p._vhNum == from_vh._number and strand3p._vhNum == to_vh_num
part.createXover(strand5p, idx5p, strand3p, idx3p,
update_oligo=False, use_undostack=False)
for (idx5p, to_vh_num, idx3p) in stap_xo[vh_num]:
strand5p = stap_strand_set.getStrand(idx5p)
to_vh = part.virtualHelixAtCoord(vh_num_to_coord[to_vh_num])
strand3p = to_vh.stapleStrandSet().getStrand(idx3p)
part.createXover(strand5p, idx5p, strand3p, idx3p,
update_oligo=False, use_undostack=False)
# connect domains into oligos; domains linked by xovers will be on the same oligo
RefreshOligosCommand(part, include_scaffold=True,
colors=(prefs.DEFAULT_SCAF_COLOR, prefs.DEFAULT_STAP_COLOR)).redo()
#SET DEFAULT COLOR
for oligo in part.oligos():
if oligo.isStaple():
default_color = prefs.DEFAULT_STAP_COLOR
else:
default_color = prefs.DEFAULT_SCAF_COLOR
oligo.applyColor(default_color, use_undostack=False)
# COLORS, INSERTIONS, SKIPS
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
vh = part.virtualHelixAtCoord((row, col))
scaf_strand_set = vh.scaffoldStrandSet()
stap_strand_set = vh.stapleStrandSet()
# install insertions and skips
# for base_idx in range(len(stap)):
# sum_of_insert_skip = insertions[base_idx] + skips[base_idx]
# if sum_of_insert_skip != 0:
# strand = scaf_strand_set.getStrand(base_idx)
# strand.addInsertion(base_idx, sum_of_insert_skip, use_undostack=False)
# # end for
# # populate colors
for base_idx, color_number in helix['stap_colors']:
color = Color( (color_number >> 16) & 0xFF,
(color_number >> 8) & 0xFF,
color_number & 0xFF).name()
strand = stap_strand_set.getStrand(base_idx)
strand.oligo().applyColor(color, use_undostack=False)
#
# if 'oligos' in obj:
# for oligo in obj['oligos']:
# vh_num = oligo['vh_num']
# idx = oligo['idx']
# seq = str(oligo['seq']) if oligo['seq'] is not None else ''
# if seq != '':
# coord = vh_num_to_coord[vh_num]
# vh = part.virtualHelixAtCoord(coord)
# scaf_ss = vh.scaffoldStrandSet()
# # stapStrandSet = vh.stapleStrandSet()
# strand = scaf_ss.getStrand(idx)
# # print "sequence", seq, vh, idx, strand.oligo()._strand5p
# strand.oligo().applySequence(seq, use_undostack=False)
# if 'modifications' in obj:
# # print("AD", cadnano.app().activeDocument)
# # win = cadnano.app().activeDocument.win
# # modstool = win.pathToolManager.modsTool
# # modstool.connectSignals(part)
# for mod_id, item in obj['modifications'].items():
# if mod_id != 'int_instances' and mod_id != 'ext_instances':
# part.createMod(item, mod_id)
# for key, mid in obj['modifications']['ext_instances'].items():
# strand, idx = part.getModStrandIdx(key)
# try:
# strand.addMods(mid, idx, use_undostack=False)
# except:
# print(strand, idx)
# raise
# for key in obj['modifications']['int_instances'].items():
# strand, idx = part.getModStrandIdx(key)
# try:
# strand.addMods(mid, idx, use_undostack=False)
# except:
# print(strand, idx)
# raise
#modstool.disconnectSignals(part)
#end def
#
# user not allowed to modify file after import
document.undoStack().clear()
def decode(document, obj, emit_signals=False):
"""Parses a dictionary (obj) created from reading a json file and uses it
to populate the given document with model data.
"""
num_bases = len(obj['vstrands'][0]['scaf'])
if num_bases % 32 == 0:
lattice_type = LatticeType.SQUARE
elif num_bases % 21 == 0:
lattice_type = LatticeType.HONEYCOMB
else:
raise IOError("error decoding number of bases")
part = None
# DETERMINE MAX ROW,COL
max_row_json = max_col_json = 0
for helix in obj['vstrands']:
max_row_json = max(max_row_json, int(helix['row'])+1)
max_col_json = max(max_col_json, int(helix['col'])+1)
# CREATE PART ACCORDING TO LATTICE TYPE
if lattice_type == LatticeType.HONEYCOMB:
doLattice = HoneycombDnaPart.legacyLatticeCoordToPositionXY
isEven = HoneycombDnaPart.isEvenParity
elif lattice_type == LatticeType.SQUARE:
doLattice = SquareDnaPart.legacyLatticeCoordToPositionXY
isEven = SquareDnaPart.isEvenParity
else:
raise TypeError("Lattice type not recognized")
part = document.createNucleicAcidPart(use_undostack=False)
part.setActive(True)
setBatch(True)
delta = num_bases - 42
# POPULATE VIRTUAL HELICES
ordered_id_list = []
vh_num_to_coord = {}
min_row, max_row = 10000, -10000
min_col, max_col = 10000, -10000
# find row, column limits
for helix in obj['vstrands']:
row = helix['row']
if row < min_row:
min_row = row
if row > max_row:
max_row = row
col = helix['col']
if col < min_col:
min_col = col
if col > max_col:
max_col = col
# end for
delta_row = (max_row + min_row) // 2
# 2 LINES COMMENTED OUT BY NC, doesn't appear to be necessary for honeycomb
# if delta_row & 1:
# delta_row += 1
delta_column = (max_col + min_col) // 2
if delta_column & 1:
delta_column += 1
# print("Found cadnano version 2 file")
# print("\trows(%d, %d): avg: %d" % (min_row, max_row, delta_row))
# print("\tcolumns(%d, %d): avg: %d" % (min_col, max_col, delta_column))
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf= helix['scaf']
# align row and columns to the center 0, 0
coord = (row - delta_row, col - delta_column)
vh_num_to_coord[vh_num] = coord
ordered_id_list.append(vh_num)
# end for
# make sure we retain the original order
radius = DEFAULT_RADIUS
for vh_num in sorted(vh_num_to_coord.keys()):
row, col = vh_num_to_coord[vh_num]
x, y = doLattice(radius, row, col)
# print("%d:" % vh_num, x, y)
part.createVirtualHelix(x, y, 0., num_bases,
id_num=vh_num, use_undostack=False)
# zoom to fit
if emit_signals:
part.partZDimensionsChangedSignal.emit(part, *part.zBoundsIds(), True)
if not getReopen():
setBatch(False)
part.setImportedVHelixOrder(ordered_id_list)
setReopen(False)
setBatch(False)
# INSTALL STRANDS AND COLLECT XOVER LOCATIONS
scaf_seg = defaultdict(list)
scaf_xo = defaultdict(list)
stap_seg = defaultdict(list)
stap_xo = defaultdict(list)
try:
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
if isEven(row, col):
scaf_strand_set, stap_strand_set = part.getStrandSets(vh_num)
else:
stap_strand_set, scaf_strand_set = part.getStrandSets(vh_num)
# validate file serialization of lists
assert( len(scaf) == len(stap) and
len(scaf) == len(insertions) and
len(insertions) == len(skips) )
# read scaffold segments and xovers
for i in range(len(scaf)):
five_vh, five_idx, three_vh, three_idx = scaf[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandType.SCAFFOLD, vh_num, i, five_vh,\
five_idx, three_vh, three_idx):
scaf_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
scaf_seg[vh_num].append(i) # end segment on a double crossover
if is3primeXover(StrandType.SCAFFOLD, vh_num, i, three_vh, three_idx):
scaf_xo[vh_num].append((i, three_vh, three_idx))
assert (len(scaf_seg[vh_num]) % 2 == 0)
# install scaffold segments
for i in range(0, len(scaf_seg[vh_num]), 2):
low_idx = scaf_seg[vh_num][i]
high_idx = scaf_seg[vh_num][i + 1]
scaf_strand_set.createStrand(low_idx, high_idx, use_undostack=False)
# read staple segments and xovers
for i in range(len(stap)):
five_vh, five_idx, three_vh, three_idx = stap[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandType.STAPLE, vh_num, i, five_vh,\
five_idx, three_vh, three_idx):
stap_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
stap_seg[vh_num].append(i) # end segment on a double crossover
if is3primeXover(StrandType.STAPLE, vh_num, i, three_vh, three_idx):
stap_xo[vh_num].append((i, three_vh, three_idx))
assert (len(stap_seg[vh_num]) % 2 == 0)
# install staple segments
for i in range(0, len(stap_seg[vh_num]), 2):
low_idx = stap_seg[vh_num][i]
high_idx = stap_seg[vh_num][i + 1]
stap_strand_set.createStrand(low_idx, high_idx, use_undostack=False)
part.refreshSegments(vh_num)
# end for
except AssertionError:
print("Unrecognized file format.")
raise
# INSTALL XOVERS
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
if isEven(row, col):
scaf_strand_set, stap_strand_set = part.getStrandSets(vh_num)
else:
stap_strand_set, scaf_strand_set = part.getStrandSets(vh_num)
# install scaffold xovers
for (idx5p, to_vh_num, idx3p) in scaf_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
try:
strand5p = scaf_strand_set.getStrand(idx5p)
except:
print(vh_num, idx5p)
print(scaf_strand_set.strand_heap)
print(stap_strand_set.strand_heap)
raise
coord = vh_num_to_coord[to_vh_num]
if isEven(*coord):
to_scaf_strand_set, to_stap_strand_set = part.getStrandSets(to_vh_num)
else:
to_stap_strand_set, to_scaf_strand_set = part.getStrandSets(to_vh_num)
strand3p = to_scaf_strand_set.getStrand(idx3p)
part.createXover( strand5p, idx5p,
strand3p, idx3p,
allow_reordering=True,
update_oligo=False,
use_undostack=False)
# install staple xovers
for (idx5p, to_vh_num, idx3p) in stap_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
strand5p = stap_strand_set.getStrand(idx5p)
coord = vh_num_to_coord[to_vh_num]
if isEven(*coord):
to_scaf_strand_set, to_stap_strand_set = part.getStrandSets(to_vh_num)
else:
to_stap_strand_set, to_scaf_strand_set = part.getStrandSets(to_vh_num)
strand3p = to_stap_strand_set.getStrand(idx3p)
part.createXover( strand5p, idx5p,
strand3p, idx3p,
allow_reordering=True,
update_oligo=False,
use_undostack=False)
# need to heal all oligo connections into a continuous
# oligo for the next steps
RefreshOligosCommand(part).redo()
# COLORS, INSERTIONS, SKIPS
for helix in obj['vstrands']:
vh_num = helix['num']
row, col = vh_num_to_coord[vh_num]
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
if isEven(row, col):
scaf_strand_set, stap_strand_set = part.getStrandSets(vh_num)
else:
stap_strand_set, scaf_strand_set = part.getStrandSets(vh_num)
# install insertions and skips
for base_idx in range(len(stap)):
sum_of_insert_skip = insertions[base_idx] + skips[base_idx]
if sum_of_insert_skip != 0:
strand = scaf_strand_set.getStrand(base_idx)
strand.addInsertion(base_idx,
sum_of_insert_skip,
use_undostack=False)
# end for
# populate colors
for base_idx, color_number in helix['stap_colors']:
color = intToColorHex(color_number)
strand = stap_strand_set.getStrand(base_idx)
strand.oligo().applyColor(color, use_undostack=False)
if 'oligos' in obj:
for oligo in obj['oligos']:
vh_num = oligo['vh_num']
idx = oligo['idx']
seq = str(oligo['seq']) if oligo['seq'] is not None else ''
if seq != '':
coord = vh_num_to_coord[vh_num]
if isEven(*coord):
scaf_ss, stap_ss = part.getStrandSets(vh_num)
else:
stap_ss, scaf_ss = part.getStrandSets(vh_num)
strand = scaf_ss.getStrand(idx)
# print "sequence", seq, vh, idx, strand.oligo()._strand5p
strand.oligo().applySequence(seq, use_undostack=False)
if 'modifications' in obj:
for mod_id, item in obj['modifications'].items():
if mod_id != 'int_instances' and mod_id != 'ext_instances':
part.createMod(item, mod_id)
for key, mid in obj['modifications']['ext_instances'].items():
# strand, idx, coord, isstaple = part.getModStrandIdx(key)
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(document, mid, idx, use_undostack=False)
except:
print(strand, idx)
raise
for key, mid in obj['modifications']['int_instances'].items():
# strand, idx, coord, isstaple = part.getModStrandIdx(key)
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(document, mid, idx, use_undostack=False)
except:
print(strand, idx)
raise
def decode(document, obj):
"""
Parses a dictionary (obj) created from reading a json file and uses it
to populate the given document with model data.
"""
num_bases = len(obj['vstrands'][0]['scaf'])
if num_bases % 32 == 0:
lattice_type = LatticeType.SQUARE
elif num_bases % 21 == 0:
lattice_type = LatticeType.HONEYCOMB
else:
raise IOError("error decoding number of bases")
# DETERMINE MAX ROW,COL
max_row_json = max_col_json = 0
for helix in obj['vstrands']:
max_row_json = max(max_row_json, int(helix['row'])+1)
max_col_json = max(max_col_json, int(helix['col'])+1)
# CREATE PART ACCORDING TO LATTICE TYPE
if lattice_type == LatticeType.HONEYCOMB:
steps = num_bases // 21
# num_rows = max(30, max_row_json, cadnano.app().prefs.honeycombRows)
# num_cols = max(32, max_col_json, cadnano.app().prefs.honeycombCols)
num_rows = max(30, max_row_json, prefs.HONEYCOMB_PART_MAXROWS)
num_cols = max(32, max_col_json, prefs.HONEYCOMB_PART_MAXCOLS)
part = document.addHoneycombPart(num_rows, num_cols, steps)
elif lattice_type == LatticeType.SQUARE:
is_SQ_100 = True # check for custom SQ100 format
for helix in obj['vstrands']:
if helix['col'] != 0:
is_SQ_100 = False
break
if is_SQ_100:
# num_rows, num_cols = 100, 1
num_rows, num_cols = 40, 30
else:
num_rows, num_cols = 40, 30
steps = num_bases // 32
# num_rows = max(30, max_row_json, cadnano.app().prefs.squareRows)
# num_cols = max(32, max_col_json, cadnano.app().prefs.squareCols)
num_rows = max(30, max_row_json, prefs.SQUARE_PART_MAXROWS)
num_cols = max(32, max_col_json, prefs.SQUARE_PART_MAXCOLS)
part = document.addSquarePart(num_rows, num_cols, steps)
# part = SquarePart(document=document, max_row=num_rows, max_col=num_cols, max_steps=steps)
else:
raise TypeError("Lattice type not recognized")
# document._addPart(part, use_undostack=False)
setBatch(True)
# POPULATE VIRTUAL HELICES
ordered_coord_list = []
vh_num_to_coord = {}
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf= helix['scaf']
coord = (row, col)
vh_num_to_coord[vh_num] = coord
ordered_coord_list.append(coord)
# make sure we retain the original order
for vh_num in sorted(vh_num_to_coord.keys()):
row, col = vh_num_to_coord[vh_num]
part.createVirtualHelix(row, col, use_undostack=False)
if not getReopen():
setBatch(False)
part.setImportedVHelixOrder(ordered_coord_list)
setReopen(False)
setBatch(False)
# INSTALL STRANDS AND COLLECT XOVER LOCATIONS
num_helices = len(obj['vstrands']) - 1
scaf_seg = defaultdict(list)
scaf_xo = defaultdict(list)
stap_seg = defaultdict(list)
stap_xo = defaultdict(list)
try:
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
vh = part.virtualHelixAtCoord((row, col))
scaf_strand_set = vh.scaffoldStrandSet()
stap_strand_set = vh.stapleStrandSet()
assert(len(scaf) == len(stap) and len(stap) == part.maxBaseIdx() + 1 and\
len(scaf) == len(insertions) and len(insertions) == len(skips))
# read scaffold segments and xovers
for i in range(len(scaf)):
five_vh, five_idx, three_vh, three_idx = scaf[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandType.SCAFFOLD, vh_num, i, five_vh,\
five_idx, three_vh, three_idx):
scaf_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
scaf_seg[vh_num].append(i) # end segment on a double crossover
if is3primeXover(StrandType.SCAFFOLD, vh_num, i, three_vh, three_idx):
scaf_xo[vh_num].append((i, three_vh, three_idx))
assert (len(scaf_seg[vh_num]) % 2 == 0)
# install scaffold segments
for i in range(0, len(scaf_seg[vh_num]), 2):
low_idx = scaf_seg[vh_num][i]
high_idx = scaf_seg[vh_num][i + 1]
scaf_strand_set.createStrand(low_idx, high_idx, use_undostack=False)
# read staple segments and xovers
for i in range(len(stap)):
five_vh, five_idx, three_vh, three_idx = stap[i]
if five_vh == -1 and three_vh == -1:
continue # null base
if isSegmentStartOrEnd(StrandType.STAPLE, vh_num, i, five_vh,\
five_idx, three_vh, three_idx):
stap_seg[vh_num].append(i)
if five_vh != vh_num and three_vh != vh_num: # special case
stap_seg[vh_num].append(i) # end segment on a double crossover
if is3primeXover(StrandType.STAPLE, vh_num, i, three_vh, three_idx):
stap_xo[vh_num].append((i, three_vh, three_idx))
assert (len(stap_seg[vh_num]) % 2 == 0)
# install staple segments
for i in range(0, len(stap_seg[vh_num]), 2):
low_idx = stap_seg[vh_num][i]
high_idx = stap_seg[vh_num][i + 1]
stap_strand_set.createStrand(low_idx, high_idx, use_undostack=False)
except AssertionError:
print("Unrecognized file format.")
raise
# INSTALL XOVERS
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
from_vh = part.virtualHelixAtCoord((row, col))
scaf_strand_set = from_vh.scaffoldStrandSet()
stap_strand_set = from_vh.stapleStrandSet()
# install scaffold xovers
for (idx5p, to_vh_num, idx3p) in scaf_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
strand5p = scaf_strand_set.getStrand(idx5p)
to_vh = part.virtualHelixAtCoord(vh_num_to_coord[to_vh_num])
strand3p = to_vh.scaffoldStrandSet().getStrand(idx3p)
part.createXover(strand5p, idx5p, strand3p, idx3p,
update_oligo=False, use_undostack=False)
# install staple xovers
for (idx5p, to_vh_num, idx3p) in stap_xo[vh_num]:
# idx3p is 3' end of strand5p, idx5p is 5' end of strand3p
strand5p = stap_strand_set.getStrand(idx5p)
to_vh = part.virtualHelixAtCoord(vh_num_to_coord[to_vh_num])
strand3p = to_vh.stapleStrandSet().getStrand(idx3p)
part.createXover(strand5p, idx5p, strand3p, idx3p,
update_oligo=False, use_undostack=False)
# need to heal all oligo connections into a continuous
# oligo for the next steps
RefreshOligosCommand(part, include_scaffold=True,
colors=(prefs.DEFAULT_SCAF_COLOR, prefs.DEFAULT_STAP_COLOR)).redo()
# SET DEFAULT COLOR
# for oligo in part.oligos():
# if oligo.isStaple():
# default_color = prefs.DEFAULT_STAP_COLOR
# else:
# default_color = prefs.DEFAULT_SCAF_COLOR
# oligo.applyColor(default_color, use_undostack=False)
# COLORS, INSERTIONS, SKIPS
for helix in obj['vstrands']:
vh_num = helix['num']
row = helix['row']
col = helix['col']
scaf = helix['scaf']
stap = helix['stap']
insertions = helix['loop']
skips = helix['skip']
vh = part.virtualHelixAtCoord((row, col))
scaf_strand_set = vh.scaffoldStrandSet()
stap_strand_set = vh.stapleStrandSet()
# install insertions and skips
for base_idx in range(len(stap)):
sum_of_insert_skip = insertions[base_idx] + skips[base_idx]
if sum_of_insert_skip != 0:
strand = scaf_strand_set.getStrand(base_idx)
strand.addInsertion(base_idx, sum_of_insert_skip, use_undostack=False)
# end for
# populate colors
for base_idx, color_number in helix['stap_colors']:
color = Color( (color_number >> 16) & 0xFF,
(color_number >> 8) & 0xFF,
color_number & 0xFF).name()
strand = stap_strand_set.getStrand(base_idx)
strand.oligo().applyColor(color, use_undostack=False)
if 'oligos' in obj:
for oligo in obj['oligos']:
vh_num = oligo['vh_num']
idx = oligo['idx']
seq = str(oligo['seq']) if oligo['seq'] is not None else ''
if seq != '':
coord = vh_num_to_coord[vhNum]
vh = part.virtualHelixAtCoord(coord)
scaf_ss = vh.scaffoldStrandSet()
# stapStrandSet = vh.stapleStrandSet()
strand = scaf_ss.getStrand(idx)
# print "sequence", seq, vh, idx, strand.oligo()._strand5p
strand.oligo().applySequence(seq, use_undostack=False)
if 'modifications' in obj:
# print("AD", cadnano.app().activeDocument)
# win = cadnano.app().activeDocument.win
# modstool = win.pathToolManager.modsTool
# modstool.connectSignals(part)
for mod_id, item in obj['modifications'].items():
if mod_id != 'int_instances' and mod_id != 'ext_instances':
part.createMod(item, mod_id)
for key, mid in obj['modifications']['ext_instances'].items():
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(mid, idx, use_undostack=False)
except:
print(strand, idx)
raise
for key in obj['modifications']['int_instances'].items():
strand, idx = part.getModStrandIdx(key)
try:
strand.addMods(mid, idx, use_undostack=False)
except:
print(strand, idx)
raise
