Beispiel #1
0
def envia_foto(Bot, mensaje=''):
    global camara
    #------------------ejemplo envio de foto-------------------------------------------------------
    #     camera.init(0, format=camera.JPEG)
    try:
        camera.init(0, format=camera.JPEG)
    except OSError as exc:
        camera.deinit()
        Bot.send_message(Bot.canal, exc.args[0])
        print(exc.args)
        return

    Led = Pin(4, Pin.OUT)  # define flash
    Led.on()  #enciende flash
    # girar vertical
    camera.flip(0)
    # giro horizontal
    camera.mirror(0)

    camera.framesize(camara.tamanyo_imagen)
    #'FRAME_240X240'/4, 'FRAME_96X96'/0, 'FRAME_CIF'/6, 'FRAME_FHD'/14, 'FRAME_HD'/11, 'FRAME_HQVGA'/3, 'FRAME_HVGA'/7, 'FRAME_P_3MP'/16, 'FRAME_P_FHD'/20, 'FRAME_P_HD'/15, 'FRAME_QCIF'/2, 'FRAME_QHD'/18, 'FRAME_QQVGA'/1, 'FRAME_QSXGA'/21, 'FRAME_QVGA'/5, 'FRAME_QXGA'/17, 'FRAME_SVGA'/9, 'FRAME_SXGA'/12, 'FRAME_UXGA'/13, 'FRAME_VGA'/8, 'FRAME_WQXGA'/19, 'FRAME_XGA'/10

    # efectos especiales
    camera.speffect(camara.efecto_especial)
    # EFFECT_NONE (default) EFFECT_NEG EFFECT_BW EFFECT_RED EFFECT_GREEN EFFECT_BLUE EFFECT_RETRO

    # white balance
    camera.whitebalance(camara.balance_blancos)
    # The options are the following:
    # WB_NONE (default) WB_SUNNY WB_CLOUDY WB_OFFICE WB_HOME

    # saturation
    camera.saturation(camara.saturacion)
    # -2,2 (default 0). -2 grayscale

    # brightness
    camera.brightness(camara.brillo)
    # -2,2 (default 0). 2 brightness

    # contrast
    camera.contrast(camara.contraste)
    #-2,2 (default 0). 2 highcontrast

    # quality
    camera.quality(camara.calidad)
    # 10-63 lower number means higher quality
    bufer = camera.capture()
    print('captura realizada')
    Led.off()  #apaga flash
    with open('file.jpg', 'w') as k:
        k.write(bufer)
    bufer = None
    camera.deinit()
    Bot.envia_archivo_multipart(configuracion.Chat_Id, 'file.jpg', 'sendPhoto',
                                'photo', mensaje)
Beispiel #2
0
async def port3(cs, rq):
    rqp = rq[1].split('/')
    if rqp[1] == 'apikey':  # Must have /apikey/<REQ>
        if rqp[2] == 'flash':  # /apikey/flash/<what>
            if rqp[3] == 'on':
                flash_light.on()
            else:
                flash_light.off()
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'pix':
            w = int(rqp[3])
            if w > 0 and w < 13:
                camera.framesize(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'qua':
            w = int(rqp[3])
            if w > 9 and w < 64:
                camera.quality(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'con':
            w = int(rqp[3])
            if w > -3 and w < 3:
                camera.contrast(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'sat':
            w = int(rqp[3])
            if w > -3 and w < 3:
                camera.saturation(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'bri':
            w = int(rqp[3])
            if w > -3 and w < 3:
                camera.brightness(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'spe':
            w = int(rqp[3])
            if w >= 0 and w < 7:
                camera.speffect(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'wbl':
            w = int(rqp[3])
            if w >= 0 and w < 5:
                camera.whitebalance(w)
            cs.send(b'%s' % hdr['OK'])
        else:
            cs.send(b'%s' % hdr['OK'])
    else:
        loop.create_task(foo([7, 5]))
        cs.send(b'%s' % hdr['OK'])

    clean_up(cs)
Beispiel #3
0
def port3(cs, rq):
    rqp = rq[1].split('/')
    if rqp[1] == 'apikey':  # Must have /apikey/<REQ>
        if rqp[2] == 'flash':  # /apikey/flash/<what>
            if rqp[3] == 'on':
                flash_light.on()
            else:
                flash_light.off()
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'fmt':
            w = int(rqp[3])
            if w >= 0 and w <= 2:
                camera.pixformat(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'pix':
            w = int(rqp[3])
            if w > 0 and w < 13:
                camera.framesize(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'qua':
            w = int(rqp[3])
            if w > 9 and w < 64:
                camera.quality(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'con':
            w = int(rqp[3])
            if w > -3 and w < 3:
                camera.contrast(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'sat':
            w = int(rqp[3])
            if w > -3 and w < 3:
                camera.saturation(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'bri':
            w = int(rqp[3])
            if w > -3 and w < 3:
                camera.brightness(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'ael':
            w = int(rqp[3])
            if w > -3 and w < 3:
                camera.aelevels(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'aev':
            w = int(rqp[3])
            if w >= 0 and w <= 1200:
                camera.aecvalue(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'agc':
            w = int(rqp[3])
            if w >= 0 and w <= 30:
                camera.agcgain(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'spe':
            w = int(rqp[3])
            if w >= 0 and w < 7:
                camera.speffect(w)
            cs.send(b'%s' % hdr['OK'])
        elif rqp[2] == 'wbl':
            w = int(rqp[3])
            if w >= 0 and w < 5:
                camera.whitebalance(w)
            cs.send(b'%s' % hdr['OK'])
        else:
            cs.send(b'%s' % hdr['none'])
    else:
        cs.send(b'%s' % hdr['err'])
    clean_up(cs)