def test_bodies():
body = Sphere(name="sphere", clever=False)
assert str(body) == "sphere"
repr(body)
assert np.allclose(body.geometric_center, (0, 0, 0))
body.add_translation_dof(name="Surge")
body.add_translation_dof(name="Heave")
# Extract faces
body.extract_faces(np.where(body.mesh.faces_centers[:, 2] < 0)[0])
# Clipping
body.keep_immersed_part(inplace=False)
# Mirror of the dofs
mirrored = body.mirrored(Plane(point=(1, 0, 0), normal=(1, 0, 0)))
assert np.allclose(mirrored.geometric_center, np.array([2, 0, 0]))
assert np.allclose(body.dofs['Surge'], -mirrored.dofs['Surge'])
# Rotation of the dofs
sideways = body.rotated(Axis(point=(0, 0, 0), vector=(0, 1, 0)), np.pi/2)
assert np.allclose(sideways.dofs['Heave'][0], np.array([1, 0, 0]))
upside_down = body.rotated(Axis(point=(0, 0, 0), vector=(0, 1, 0)), np.pi)
assert np.allclose(body.dofs['Heave'], -upside_down.dofs['Heave'])
# Copy of the body
copy_of_body = body.copy(name="copy_of_sphere")
copy_of_body.translate_x(10.0)
copy_of_body.add_translation_dof(name="Heave")
# Join bodies
both = body.join_bodies(copy_of_body)
assert set(both.dofs) == {'sphere__Surge', 'copy_of_sphere__Surge', 'sphere__Heave', 'copy_of_sphere__Heave'}
def __init__(self,
mesh_slice: Union[Mesh, CollectionOfMeshes],
axis: Axis = Oz_axis,
nb_repetitions: int = 1,
name=None):
assert isinstance(mesh_slice, Mesh) or isinstance(
mesh_slice, CollectionOfMeshes)
assert isinstance(nb_repetitions, int)
assert nb_repetitions >= 1
assert isinstance(axis, Axis)
slices = [mesh_slice]
for i in range(1, nb_repetitions + 1):
slices.append(
mesh_slice.rotated(axis,
angle=2 * i * np.pi / (nb_repetitions + 1),
name=f"rotation_{i}_of_{mesh_slice.name}"))
super().__init__(slices, name=name)
if not axis.is_parallel_to(Oz_axis):
LOG.warning(
f"{self.name} is an axi-symmetric mesh along a non vertical axis."
)
self.axis = axis.copy()
if self.name is not None:
LOG.debug(f"New rotation symmetric mesh: {self.name}.")
else:
LOG.debug(f"New rotation symmetric mesh.")
def test_dof():
nodes = np.array([[0, 0, 0], [0, 0, 1], [1, 0, 1], [1, 0, 0]])
faces = np.array([[0, 1, 2, 3]])
body = FloatingBody(Mesh(nodes, faces), name="one_face")
assert body.dofs == {}
body.add_translation_dof(direction=(1.0, 0.0, 0.0), name="1")
assert np.allclose(body.dofs["1"], np.array([1.0, 0.0, 0.0]))
body.add_translation_dof(direction=(0.0, 1.0, 0.0), name="2")
assert np.allclose(body.dofs["2"], np.array([0.0, 1.0, 0.0]))
body.add_rotation_dof(Axis(vector=(0.0, 0.0, 1.0)), name="3")
body.add_rotation_dof(Axis(point=(0.5, 0, 0), vector=(0.0, 0.0, 1.0)), name="4")
def test_plane_transformations():
# TRANSLATIONS
translated_plane = xOz_Plane.translate(vector=(1, 0, 0), inplace=False)
assert xOz_Plane is not translated_plane
assert xOz_Plane == translated_plane
assert yOz_Plane.translated_x(10).rotated_y(np.pi / 8).c == 10
translated_plane = xOz_Plane.translate(vector=(0, 1, 0), inplace=False)
assert translated_plane.c == 1
assert np.all(translated_plane.normal == xOz_Plane.normal)
# ROTATIONS
rotated_plane = xOz_Plane.rotate(Oy_axis, angle=np.pi / 12, inplace=False)
assert rotated_plane == xOz_Plane.rotated(Oy_axis, angle=np.pi / 12)
assert xOz_Plane is not rotated_plane
assert xOz_Plane == rotated_plane
rotated_plane = xOz_Plane.rotate(Ox_axis, angle=np.pi / 2, inplace=False)
assert rotated_plane == xOy_Plane
# MIRRORED BY ITSELF
plane = Plane(normal=(1, 0, 0), point=(0.3, 0.2, 0.6))
assert plane.mirrored(plane) != plane
assert plane.mirrored(plane) == Plane(normal=(-1, 0, 0),
point=(0.3, 0.2, 0.6))
flipped_plane = plane.rotate(Axis(point=plane.point, vector=(0, 1, 0)),
np.pi)
assert flipped_plane == plane.mirror(plane)
def _generate_mesh_using_symmetry(self, ntheta, nphi, clip_free_surface,
mesh_name):
if clip_free_surface:
if self.geometric_center[2] < -self.radius: # fully immersed
theta_max = np.pi
elif self.geometric_center[2] < self.radius:
theta_max = np.arccos(self.geometric_center[2] / self.radius)
else:
raise ValueError(
"Impossible to mesh the immersed hull of a sphere completely out of the water"
)
else:
theta_max = np.pi
theta = np.linspace(0.0, theta_max, ntheta + 1)
points_on_a_meridian = (self.radius * np.stack(
[np.sin(theta),
np.zeros_like(theta), -np.cos(theta)], axis=1) +
self.geometric_center)
symmetry_axis = Axis(vector=[0, 0, 1], point=self.geometric_center)
return AxialSymmetricMesh.from_profile(points_on_a_meridian,
axis=symmetry_axis,
nphi=nphi,
name=mesh_name)
def from_profile(profile: Union[Callable, Iterable[float]],
z_range: Iterable[float]=np.linspace(-5, 0, 20),
axis: Axis=Oz_axis,
nphi: int=20,
name=None):
"""Return a floating body using the axial symmetry.
The shape of the body can be defined either with a function defining the profile as [f(z), 0, z] for z in z_range.
Alternatively, the profile can be defined as a list of points.
The number of vertices along the vertical direction is len(z_range) in the first case and profile.shape[0] in the second case.
Parameters
----------
profile : function(float → float) or array(N, 3)
define the shape of the body either as a function or a list of points.
z_range: array(N), optional
used only if the profile is defined as a function.
axis : Axis
symmetry axis
nphi : int, optional
number of vertical slices forming the body
name : str, optional
name of the generated body (optional)
Returns
-------
AxialSymmetricMesh
the generated mesh
"""
if name is None:
name = "axisymmetric_mesh"
if callable(profile):
z_range = np.asarray(z_range)
x_values = [profile(z) for z in z_range]
profile_array = np.stack([x_values, np.zeros(len(z_range)), z_range]).T
else:
profile_array = np.asarray(profile)
assert len(profile_array.shape) == 2
assert profile_array.shape[1] == 3
n = profile_array.shape[0]
angle = 2 * np.pi / nphi
nodes_slice = np.concatenate([profile_array, axis.rotate_points(profile_array, angle)])
faces_slice = np.array([[i, i+n, i+n+1, i+1] for i in range(n-1)])
body_slice = Mesh(nodes_slice, faces_slice, name=f"slice_of_{name}")
body_slice.merge_duplicates()
body_slice.heal_triangles()
return AxialSymmetricMesh(body_slice, axis=axis, nb_repetitions=nphi - 1, name=name)
def fb_array():
sphere = Sphere(
radius=r, # Dimension
center=(0, 0, 0), # Position
nphi=4, ntheta=10, # Fineness of the mesh
)
my_axis = Axis((0, 1, 0),
point=(0,0,0))
sphere.add_rotation_dof(axis=my_axis)
sphere.keep_immersed_part()
return sphere.assemble_arbitrary_array(locations)
def test_clipping_of_dofs(z_center, collection_of_meshes):
"""Check that clipping a body with a dof is the same as clipping the body ant then adding the dof."""
full_sphere = Sphere(center=(0, 0, z_center), name="sphere", clever=collection_of_meshes, clip_free_surface=False)
axis = Axis(point=(1, 0, 0), vector=(1, 0, 0))
full_sphere.add_rotation_dof(axis, name="test_dof")
clipped_sphere = full_sphere.keep_immersed_part(free_surface=0.0, sea_bottom=-np.infty, inplace=False)
other_clipped_sphere = FloatingBody(mesh=clipped_sphere.mesh, name="other_sphere")
other_clipped_sphere.add_rotation_dof(axis, name="test_dof")
if clipped_sphere.mesh.nb_faces > 0:
assert np.allclose(clipped_sphere.dofs['test_dof'], other_clipped_sphere.dofs['test_dof'])
else:
assert len(clipped_sphere.dofs['test_dof']) == 0
def test_axis():
assert np.allclose(Axis(vector=(1, 1, 1)).vector, np.sqrt(3)/3 * np.ones((3,)))
assert Axis(vector=(1, 1, 1), point=(0, 0, 0)) == Axis(vector=(1, 1, 1), point=(2, 2, 2))
assert Axis(vector=(0, 0, 1), point=(0, 0, 0)) == Axis(vector=(2e-16, 3e-16, 1), point=(0, 0, 1.5))
assert Axis(vector=(1, 1, 1), point=(0, 0, 0)) != Axis(vector=(1, 1, 1), point=(2, 2, 0))
assert (2, 0, 0) in Ox_axis
assert (0, 1, 0) not in Ox_axis
assert Ox_axis.is_orthogonal_to(yOz_Plane)
assert not Ox_axis.is_orthogonal_to((1, 1, 1))
assert Ox_axis.angle_with_respect_to(Oy_axis) == np.pi/2
assert Oy_axis.angle_with_respect_to(Ox_axis) == np.pi/2
def import_cal_file(filepath):
"""Read a Nemoh.cal file and return a list of problems."""
with open(filepath, 'r') as cal_file:
cal_file.readline() # Unused line.
rho = float(cal_file.readline().split()[0])
g = float(cal_file.readline().split()[0])
depth = float(cal_file.readline().split()[0])
if depth == 0.0:
sea_bottom = -np.infty
else:
sea_bottom = -depth
xeff, yeff = (float(x) for x in cal_file.readline().split()[0:2])
bodies = []
cal_file.readline() # Unused line.
nb_bodies = int(cal_file.readline().split()[0])
for _ in range(nb_bodies):
cal_file.readline() # Unused line.
mesh_file = cal_file.readline().split()[0].strip()
mesh_file = os.path.join(
os.path.dirname(filepath),
mesh_file) # mesh path are relative to Nemoh.cal
cal_file.readline() # Number of points, number of panels (unused)
if os.path.splitext(mesh_file)[1] == '.py':
from importlib.util import spec_from_file_location, module_from_spec
spec = spec_from_file_location("body_initialization_module",
mesh_file)
body_initialization = module_from_spec(spec)
spec.loader.exec_module(body_initialization)
body = body_initialization.body
else:
body = FloatingBody.from_file(mesh_file)
nb_dofs = int(cal_file.readline().split()[0])
for i_dof in range(nb_dofs):
dof_data = cal_file.readline().split()
if int(dof_data[0]) == 1:
direction = np.array([float(x) for x in dof_data[1:4]])
body.add_translation_dof(direction=direction)
elif int(dof_data[0]) == 2:
direction = np.array([float(x) for x in dof_data[1:4]])
center_of_mass = np.array(
[float(x) for x in dof_data[4:7]])
body.add_rotation_dof(
Axis(vector=direction, point=center_of_mass))
nb_forces = int(cal_file.readline().split()[0])
for i_force in range(nb_forces):
force_data = cal_file.readline().split()
if int(force_data[0]) == 1:
direction = np.array([float(x) for x in force_data[1:4]])
elif int(force_data[0]) == 2:
direction = np.array([float(x) for x in force_data[1:4]])
center_of_mass = np.array(
[float(x) for x in force_data[4:7]])
# TODO: use the generalized forces.
nb_additional_lines = int(cal_file.readline().split()[0])
for _ in range(nb_additional_lines):
cal_file.readline() # The additional lines are just ignored.
bodies.append(body)
if nb_bodies > 1:
bodies = FloatingBody.join_bodies(*bodies)
else:
bodies = bodies[0]
cal_file.readline() # Unused line.
frequency_data = cal_file.readline().split()
omega_range = np.linspace(float(frequency_data[1]),
float(frequency_data[2]),
int(frequency_data[0]))
direction_data = cal_file.readline().split()
direction_range = np.linspace(float(direction_data[1]),
float(direction_data[2]),
int(direction_data[0]))
direction_range = np.pi / 180 * direction_range # conversion from degrees to radians.
# The options below are not implemented yet.
cal_file.readline() # Unused line.
irf_data = cal_file.readline()
show_pressure = cal_file.readline().split()[0] == "1"
kochin_data = cal_file.readline().split()
kochin_range = np.linspace(float(kochin_data[1]),
float(kochin_data[2]), int(kochin_data[0]))
free_surface_data = cal_file.readline().split()
# Generate Capytaine's problem objects
env_args = dict(body=bodies, rho=rho, sea_bottom=sea_bottom, g=g)
problems = []
for omega in omega_range:
for direction in direction_range:
problems.append(
DiffractionProblem(wave_direction=direction,
omega=omega,
**env_args))
for dof in bodies.dofs:
problems.append(
RadiationProblem(radiating_dof=dof, omega=omega, **env_args))
return problems
def rotate(self, axis: Axis, angle: float):
self.translation = axis.rotation_matrix(angle) @ self.translation
CollectionOfMeshes.rotate(self, axis, angle)
return self
def test_rotation_non_reference_axis():
axis = Axis(vector=(0, 0, 1), point=(1, 0, 0))
point = [[1.0, 0.0, 0.0]]
rotated_point = axis.rotate_points(point, np.pi)
assert np.allclose(rotated_point, point)
def test_axis_transformation():
assert Ox_axis.translated_x(10) == Ox_axis
assert Ox_axis.translated_y(10) == Axis(vector=(1, 0, 0), point=(0, 10, 0))
assert Ox_axis.rotated(Ox_axis, angle=np.pi / 2) == Ox_axis
assert Ox_axis.rotated(Oy_axis, angle=-np.pi / 2) == Oz_axis
assert Ox_axis.mirrored(plane=yOz_Plane) == Ox_axis
assert Ox_axis.mirrored(plane=xOz_Plane.translated_y(2)) == Axis(
vector=(1, 0, 0), point=(0, 4, 0))
axis1 = Axis(vector=(1, 1, 1), point=(0, 0, 0))
axis2 = Axis(vector=(1, 2, 3), point=(0, 0, 0))
assert axis1.rotated_around_center_to_align_vectors(
axis1.point, axis1.vector, axis2.vector) == axis2
axis1.rotate(axis2, np.pi)
assert axis1.rotated_around_center_to_align_vectors(
axis1.point, axis1.vector, axis2.vector) == axis2
axis1.vector *= -1
assert axis1.rotated_around_center_to_align_vectors(
axis1.point, axis1.vector, axis2.vector) == axis2
axis1 = Axis(vector=(1, 1, 1), point=(1, 2, 0))
axis2 = Axis(vector=(2, 2, 2), point=(0, 0, 0))
assert axis1.translated_point_to_point(axis1.point, axis2.point) == axis2
def rotate(self, axis: Axis, angle: float):
self.translation = axis.rotate_vector([self.translation], angle)[0, :]
CollectionOfMeshes.rotate(self, axis, angle)
return self
