Beispiel #1
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    pwm = await c.acquire('PWMs')

    n = await pwm.num_pins()

    print("# PWM-capable pins:", n)

    frequency = 50   # Hz

    for pin_index in range(n):
        print('Running on pin #', pin_index)

        await pwm.enable(pin_index, frequency)

        for i in range(10):
            for duty in range(5, 10):
                await pwm.set_duty(pin_index, duty)
                await asyncio.sleep(0.1)

        await asyncio.sleep(2)

        await pwm.disable(pin_index)

    await c.release(pwm)

    await c.close()
Beispiel #2
0
async def run13():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    pwm = await c.acquire('PWMs')

    frequency = 20000   # Hz

    await pwm.enable(1, frequency)
    await pwm.enable(3, frequency//2)

    for j in range(100):
        for i in range(41):
            await pwm.set_duty(1, 15+i)
            await pwm.set_duty(3, 40+i)
            await asyncio.sleep(0.1)
        for i in range(40, -1, -1):
            await pwm.set_duty(1, 15+i)
            await pwm.set_duty(3, 40+i)
            await asyncio.sleep(0.1)

    #await asyncio.sleep(100)

    await pwm.disable(1)
    await pwm.disable(3)

    await c.release(pwm)

    await c.close()
Beispiel #3
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    enc = await c.acquire('Encoders')

    enc_index = 1  # the _second encoder

    n = await enc.num_encoders()
    print('# encoders:', n)

    await enc.enable(enc_index)

    def fmt(val):
        return "{:6d}".format(val)

    for i in range(100000):
        counts = await enc.read_counts(enc_index)
        counts_str = ''.join([fmt(c) for c in counts])

        timing = await enc.read_timing(enc_index)
        timing_str = ''.join([fmt(t) for t in timing])

        print(counts_str + timing_str)

        await asyncio.sleep(0.1)

    await enc.disable(enc_index)

    await c.release(enc)

    await c.close()
Beispiel #4
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    b = await c.acquire('Buzzer')

    await asyncio.sleep(2)

    #await b.play()                   # defaults to the 'on' sound
    #await b.play('o4l16ceg>c8')      # the 'on' sound (explicit this time)
    #await b.play('v10>>g16>>>c16')   # the soft reset sound
    #await b.play('>E>E>E R >C>E>G')
    #await b.play('!L16 V12 cdefgab>cbagfedc')   # C-major scale up and down

    print(await b.is_currently_playing())

    await b.play('!T240 L8 agafaea dac+adaea fa<aa<bac#a dac#adaea f4')   # "Bach's fugue in D-minor"

    print(await b.is_currently_playing())

    await b.wait()

    await asyncio.sleep(2)

    await c.release(b)

    await c.close()
Beispiel #5
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    fd = c.fd

    await eeprom_store(fd, 0xA0, b'0000')

    buf = await eeprom_query(fd, 0xA0, 4)
    print(buf)
    assert buf == b'0000'

    await eeprom_store(fd, 0xA0, b'1234')

    buf = await eeprom_query(fd, 0xA1, 3)
    print(buf)
    assert buf == b'234'

    buf = await eeprom_query(fd, 0xA2, 2)
    print(buf)
    assert buf == b'34'

    buf = await eeprom_query(fd, 0xA3, 1)
    print(buf)
    assert buf == b'4'

    buf = await eeprom_query(fd, 0xA0, 4)
    print(buf)
    assert buf == b'1234'
Beispiel #6
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    camera = await c.acquire('Camera')
    frame = await camera.capture()
    await c.release(camera)

    await c.close()

    print(frame)
Beispiel #7
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    iface = await c.acquire('VersionInfo')
    name = await iface.name()
    version = await iface.version()
    await c.release(iface)

    await c.close()

    print(name, version)
Beispiel #8
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    loop = await c.acquire('LoopFrequency')

    for i in range(50):
        print(await loop.read())
        await asyncio.sleep(0.05)

    await c.release(loop)

    await c.close()
Beispiel #9
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    p = await c.acquire('Photoresistor')

    for i in range(1000):
        print(await p.read(), await p.read_millivolts(), await p.read_ohms())
        await asyncio.sleep(0.1)

    await c.release(p)

    await c.close()
Beispiel #10
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    accel = await c.acquire('Accelerometer')

    for i in range(1000):
        fmt(await accel.read())
        await asyncio.sleep(0.05)

    await c.release(accel)

    await c.close()
Beispiel #11
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    ahrs = await c.acquire('AHRS')

    for i in range(10000):
        fmt(await ahrs.read())
        await asyncio.sleep(0.05)

    await c.release(ahrs)

    await c.close()
Beispiel #12
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    power = await c.acquire('Power')

    for i in range(1000):
        mv = await power.millivolts()
        mi = await power.estimate_remaining()
        sd = await power.should_shut_down()
        print(mv, mi, sd)
        await asyncio.sleep(0.1)

    await c.release(power)

    await c.close()
Beispiel #13
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    motors = await c.acquire('CarMotors')

    await motors.set_params(
        top=40000,
        steering_left=3600,
        steering_mid=3000,
        steering_right=2400,
        steering_millis=1000,
        throttle_forward=4000,
        throttle_mid=3000,
        throttle_reverse=2000,
        throttle_millis=1000,
    )
    await motors.save_params()

    await motors.on()

    await asyncio.sleep(1)

    for i in range(2):
        for v in range(-45, 45):
            print(v)
            await motors.set_steering(v)
            await motors.set_throttle(20)
            await asyncio.sleep(0.02)
        for v in range(45, -45, -1):
            print(v)
            await motors.set_steering(v)
            await motors.set_throttle(20)
            await asyncio.sleep(0.02)

    await motors.off()

    await asyncio.sleep(3)

    await c.release(motors)

    await c.close()
Beispiel #14
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    b = await c.acquire('PushButtons')

    print('There are', await b.num_buttons(), 'buttons.')

    bi, action = await b.wait_for_action('released')

    print("Button", bi, "was", action)

    while True:
        event = await b.wait_for_event()
        pprint(event)

    await c.release(b)

    await c.close()
Beispiel #15
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    gyro = await c.acquire('Gyroscope')
    gyro_accum = await c.acquire('Gyroscope_accum')

    for i in range(500):
        fmt(await gyro.read())
        fmt(await gyro_accum.read())
        print()
        if i % 50 == 0:
            await gyro_accum.reset()
        await asyncio.sleep(0.1)

    await c.release(gyro)
    await c.release(gyro_accum)

    await c.close()
Beispiel #16
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    leds = await c.acquire('LEDs')

    mode_map = await leds.mode_map()
    print(mode_map)

    for mode, _ in mode_map.items():
        print('Setting to mode', mode)
        await leds.set_mode(mode)
        await asyncio.sleep(3)

    print('Clearing the mode...')
    await leds.set_mode(None)

    led_map = await leds.led_map()
    print(led_map)

    print('Turning on red...')
    await leds.set_led('red', True)
    await asyncio.sleep(2)

    print('Turning off red...')
    await leds.set_led('red', False)

    await asyncio.sleep(1)

    for i in range(8):
        binary = "{0:{fill}3b}".format(i, fill='0')
        print('Showing binary:', binary)
        red, green, blue = [int(b) for b in binary]
        await leds.set_many_leds(
            zip(['red', 'green', 'blue'], [red, green, blue]))
        await asyncio.sleep(1)

    await c.release(leds)

    await c.close()
Beispiel #17
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    print('Acquiring PID_steering and CarMotors...')
    pid = await c.acquire('PID_steering')
    motors = await c.acquire('CarMotors')

    p, i, d = 1.0, 0.1, 0.1

    await pid.set_pid(p, i, d)
    await pid.set_point(0.0)

    print('Enabling PID loop...')
    await pid.enable()

    await asyncio.sleep(5)

    print('Turning on CarMotors and setting throttle...')
    await motors.on()
    await motors.set_throttle(25)

    await asyncio.sleep(10)

    print('Disabling PID loop...')
    await pid.disable()

    await asyncio.sleep(5)

    print('Turning off CarMotors...')
    await motors.off()

    await asyncio.sleep(5)

    print('Releasing PID_steering and CarMotors...')
    await c.release(pid)
    await c.release(motors)

    await c.close()
Beispiel #18
0
async def run():
    c = controller.CioRoot()
    caps = await c.init()
    pprint(caps)

    iface = await c.acquire('VersionInfo')

    n = 0
    start = time.time()

    while True:
        _ = await iface.version()
        n += 1
        now = time.time()
        if (now - start) >= 1.0:
            print(n)
            start = now
            n = 0

    await c.release(iface)

    await c.close()