def ParseCommandLine(self):
"""
Process command line arguments and read in config file/globals.
@return List of options parsed from command line
"""
version = '$Revision: 1.100 $'
version = version.replace(' ', '')
ver = version.replace(' $', '')
us = '%prog phase [options] \nVersion: ' + ver
desc = 'The script generates traces for an application using the PinPoints methodology '\
'(based on PinPlay: Pin-based record/replay tools). '\
'At least one command line option must be given to chose the phases to run. ' \
'Use option \'--default_phases\' to run all the default phases. ' \
'See section "Phase options" for a list of phases. \n\n'\
'' \
'The two parameters \'program_name\' and \'input_name\' must be defined in order '\
'to run this script. If running the logging phase (-l), then two more parameters, '\
'\'command\' and \'mode\', must also be defined. '\
'Parameters can be given either in a tracing configuration file or with command '\
'line options. \n\n'\
'' \
'The default configuration file is "tracing.cfg". '\
'If it exists, the script will always read this cfg file first. '\
'Use the option "--cfg" to select additional files. '\
'Each cfg file on the command line is processed in order. '\
'Command line options over-ride values read from configuration files. '\
'All parameters listed in the three parameter '\
'sections below can be defined in a cfg file. The long option name, '\
'not the single letter option, must be used in the cfg files.\n\n'\
'' \
'Example parameter configuration file:'\
' '\
'--------------------------------------------'\
' '\
'[Parameters]'\
' '\
'program_name: omnetpp'\
' '\
'input_name: p10000-s10'\
' '\
'command: ./dtlb5-lin64 -p10000 -s10'\
' '\
'mode: st'\
' '\
'--------------------------------------------'
util.CheckNonPrintChar(sys.argv)
parser = optparse.OptionParser(
usage=us,
description=desc,
version=ver,
formatter=cmd_options.BlankLinesIndentedHelpFormatter())
# Command line options to control the tools behavior. These are not in any
# of the option groups.
#
# import pdb; pdb.set_trace()
cmd_options.add_program_wp(parser)
cmd_options.append_status(parser)
cmd_options.config_file(parser)
cmd_options.debug(parser)
cmd_options.delete(parser)
cmd_options.delete_all(parser)
cmd_options.delete_wp(parser)
cmd_options.dir_separator(parser)
cmd_options.log_options(parser)
cmd_options.msgfile_ext(parser)
cmd_options.no_glob(parser)
cmd_options.pintool(parser)
cmd_options.pin_options(parser)
cmd_options.replay_options(parser)
cmd_options.save_global(parser)
cmd_options.verbose(parser)
self.AddAdditionalOptions(parser)
# Top level command line options in the default group allow the user
# to choose the phases to run.
#
phase_group = cmd_options.PhaseGroup(parser)
cmd_options.default_phases(parser, phase_group)
cmd_options.native_pure(parser, phase_group)
cmd_options.log(parser, phase_group)
cmd_options.replay(parser, phase_group)
cmd_options.basic_block_vector(parser, phase_group)
cmd_options.simpoint(parser, phase_group)
cmd_options.region_pinball(parser, phase_group)
cmd_options.replay_region(parser, phase_group)
self.AddAdditionalPhaseOptions(parser, phase_group)
parser.add_option_group(phase_group)
# Top level command line options in param group are used to set various
# tracing parameters.
#
param_group = cmd_options.ParameterGroup(parser)
cmd_options.command(parser, param_group)
cmd_options.compressed(parser, param_group)
cmd_options.focus_thread(parser, param_group)
cmd_options.input_name(parser, param_group)
cmd_options.mpi_options(parser, param_group)
cmd_options.mode(parser, param_group)
cmd_options.num_cores(parser, param_group)
cmd_options.num_proc(parser, param_group)
cmd_options.program_name(parser, param_group)
self.KitOption(parser, param_group)
parser.add_option_group(param_group)
# Top level command line options which only apply to the Simpoint phase.
#
simpoint_phase_group = cmd_options.SimpointPhaseGroup(parser)
cmd_options.combine(parser, simpoint_phase_group)
cmd_options.cutoff(parser, simpoint_phase_group)
cmd_options.ldv(parser, simpoint_phase_group)
cmd_options.maxk(parser, simpoint_phase_group)
cmd_options.slice_size(parser, simpoint_phase_group)
cmd_options.warmup_factor(parser, simpoint_phase_group)
cmd_options.pccount_regions(parser, simpoint_phase_group)
cmd_options.global_regions(parser, simpoint_phase_group)
cmd_options.simpoint_options(parser, simpoint_phase_group)
parser.add_option_group(simpoint_phase_group)
# Top level command line options which only apply to the region pinball generation phase.
#
region_pb_phase_group = cmd_options.RegionPBPhaseGroup(parser)
cmd_options.epilog_length(parser, region_pb_phase_group)
cmd_options.prolog_length(parser, region_pb_phase_group)
cmd_options.warmup_length(parser, region_pb_phase_group)
parser.add_option_group(region_pb_phase_group)
# Add verify options.
#
self.AddVerifyOptions(parser)
# Top level command line options in modify group modify the behavior of phases.
#
modify_group = cmd_options.ModifyGroup(parser)
# These should go before the rest of the modify options.
#
cmd_options.coop_pinball(parser, modify_group)
cmd_options.cross_os(parser, modify_group)
cmd_options.list(parser, modify_group)
cmd_options.native_pin(parser, modify_group)
cmd_options.no_focus_thread(parser, modify_group)
cmd_options.whole_pgm_dir(parser, modify_group)
self.AddAdditionalModifyOptions(parser, modify_group)
parser.add_option_group(modify_group)
# Top level command line options in which only apply to the region pinball generation phase.
#
wp_filter_group = cmd_options.WPFilterGroup(parser)
cmd_options.relog_name(parser, wp_filter_group)
cmd_options.relog_focus(parser, wp_filter_group)
cmd_options.relog_no_init(parser, wp_filter_group)
cmd_options.relog_no_cleanup(parser, wp_filter_group)
cmd_options.relog_code_exclude(parser, wp_filter_group)
cmd_options.relog_no_omp_spin(parser, wp_filter_group)
cmd_options.relog_no_mpi_spin(parser, wp_filter_group)
cmd_options.use_relog_name(parser, wp_filter_group)
cmd_options.use_relog_focus(parser, wp_filter_group)
cmd_options.use_relog_no_cleanup(parser, wp_filter_group)
cmd_options.use_relog_no_init(parser, wp_filter_group)
cmd_options.use_relog_code_exclude(parser, wp_filter_group)
cmd_options.use_relog_no_omp_spin(parser, wp_filter_group)
cmd_options.use_relog_no_mpi_spin(parser, wp_filter_group)
parser.add_option_group(wp_filter_group)
# Parse the command line options.
#
# import pdb; pdb.set_trace()
(options, args) = parser.parse_args()
# Added method cbsp() to 'options' to check if running CBSP.
#
util.AddMethodcbsp(options)
# Check to make sure there was at least one command line option given.
#
# import pdb; pdb.set_trace()
if len(sys.argv) == 1:
msg.PrintMsg(
"ERROR: Must use command line options to chose at least one phase to run.\n"
"Use the option '--default_phases' to run the default phases. Use '--help' for more info.")
util.CheckResult(-1, options, 'Checking command line options')
# If user does not just want to delete all the files, then
# read in configuration files and set global variables.
#
# import pdb; pdb.set_trace()
if not options.delete_all:
self.Config.GetCfgGlobals(options,
True) # Yes, need 4 required parameters
# Once the tracing configuration parameters are read, get the kit
# in case pinplayhome was set on the command line. Also, need to
# reset the path in object 'self' and set the kit in self.phases.
#
# import pdb; pdb.set_trace()
kit_obj = self.GetKit()
self.path = kit_obj.path
self.script_path = kit_obj.path
self.phases.SetKit(kit_obj)
# If required, check to see if there any 'forbidden' char in some of
# the parameters.
#
# import pdb; pdb.set_trace()
if self.kit_type == config.SDE and hasattr(options,
'spec') and not options.spec:
self.Config.CheckForbiddenChar()
# If doing code exclusion, check to make sure the file exists.
#
if options.relog_code_exclude:
if not os.path.exists(options.relog_code_exclude):
msg.PrintMsg(
'ERROR: The code exclusion file used for filtering does not exist:\n'
' ' + options.relog_code_exclude)
util.CheckResult(-1, options, 'Checking command line options')
# Do some 'special' things on native Windows.
#
util.WindowsNativeCheck(options)
return options
def ParseCommandLine(self):
"""
Get the options from the command line and check for errors.
@return tuple with parsed options and unparsed args
"""
# Define and get command line options.
#
version = '$Revision: 1.33 $'
version = version.replace('$Revision: ', '')
ver = version.replace(' $', '')
us = '%prog --bbv_file FILE --data_dir DIR FILE --simpoint_file FILE [options]'
desc = 'Runs Simpoint and then generates the region CSV file. ' \
'Input to Simpoint can be just an BBV file or a combination of BBV/LDV files. \n\n' \
'Required options: --bbv_file, --data_dir, --simpoint_file'
util.CheckNonPrintChar(sys.argv)
parser = optparse.OptionParser(
usage=us,
version=ver,
description=desc,
formatter=cmd_options.BlankLinesIndentedHelpFormatter())
cmd_options.debug(parser)
cmd_options.global_file(parser)
cmd_options.list(parser, '')
cmd_options.bbv_file(parser, '')
cmd_options.data_dir(parser)
cmd_options.simpoint_file(parser)
cmd_options.ldv(parser, '')
cmd_options.combine(parser, '')
cmd_options.cutoff(parser, '')
cmd_options.focus_thread(parser, '')
cmd_options.maxk(parser, '')
cmd_options.num_cores(parser, '')
cmd_options.simpoint_options(parser, '')
(options, args) = parser.parse_args()
# Added method cbsp() to 'options' to check if running CBSP.
#
util.AddMethodcbsp(options)
# Must have option '--ldv', even if using option '--combine', in order to
# process BBV/LDV both. Let user know if '--combine' used w/o '--ldv'.
#
if not options.ldv and options.combine != -1.0:
msg.PrintMsgPlus('WARNING: Option \'--combine\' detected without \'--ldv\'. Only using BBV for ' \
'Simpoint. \n Must explicitly specify \'--ldv\' in order to use both BBV/LDV.\n')
if options.ldv:
msg.PrintMsgPlus(
'Using both BBV/LDV files when running Simpoint\n')
# If option combine is not set, then set it to the default value.
# Check to make sure combine an acceptable value.
#
util.SetCombineDefault(options)
util.CheckCombine(options)
# Read in an optional configuration files and set global variables.
#
config_obj = config.ConfigClass()
config_obj.GetCfgGlobals(options,
False) # Don't need to require 4 variables
# Error check input to make sure all required options are on the command line.
#
if options.bbv_file == '':
msg.PrintAndExit(
'Basic block vector file must be defined with option: --bbv_file FILE'
)
if options.data_dir == '':
msg.PrintAndExit(
'Simpoint data directory must be defined with option: --data_dir DIR'
)
if options.simpoint_file == '':
msg.PrintAndExit(
'Simpoint output must be defined with option: --simpoint_file FILE'
)
# The data_dir should exist and contain the BBV file.
#
if not os.path.isdir(options.data_dir):
msg.PrintAndExit('Data directory does not exist: ' +
options.data_dir)
if not os.path.isfile(os.path.join(options.data_dir,
options.bbv_file)):
msg.PrintAndExit('Basic block vector file does not exist: ' +
options.bbv_file)
# Do some 'special' things on native Windows.
#
util.WindowsNativeCheck(options)
return (options, args)