def __init__(self):
dataDir = Settings.dataDir + 'quickstart/'
doc = Document()
builder = DocumentBuilder(doc)
builder.writeln('Hello World!')
doc.save(dataDir + 'HelloWorld.docx')
print "Document saved."
def __init__(self):
dataDir = Settings.dataDir + 'quickstart/'
doc = Document()
builder = DocumentBuilder(doc)
builder.writeln('Hello World!')
doc.save(dataDir + 'HelloWorld.docx')
print "Document saved."
def __init__(self):
self.dataDir = Settings.dataDir + 'programming_documents/'
# Create a blank document.
doc = Document()
builder = DocumentBuilder(doc)
# The number of pages the document should have.
numPages = 4
# The document starts with one section, insert the barcode into this existing section.
self.insert_barcode_into_footer(builder, doc.getFirstSection(), 1, HeaderFooterType.FOOTER_PRIMARY)
i = 1
while (i < numPages) :
# Clone the first section and add it into the end of the document.
cloneSection = doc.getFirstSection().deepClone(False)
cloneSection.getPageSetup().setSectionStart(SectionStart.NEW_PAGE)
doc.appendChild(cloneSection)
# Insert the barcode and other information into the footer of the section.
self.insert_barcode_into_footer(builder, cloneSection, i, HeaderFooterType.FOOTER_PRIMARY)
i = i + 1
# Save the document as a PDF to disk. You can also save this directly to a stream.
doc.save(self.dataDir + "InsertBarcodeOnEachPage.docx")
print "Aspose Barcode Inserted..."
def __init__(self):
dataDir = Settings.dataDir + 'programming_documents/'
doc = Document()
builder = DocumentBuilder(doc)
pageSetup = builder.getPageSetup()
pageSetup.setTopMargin(0.5)
pageSetup.setBottomMargin(0.5)
pageSetup.setLeftMargin(0.5)
pageSetup.setRightMargin(0.5)
pageSetup.setHeaderDistance(0.2)
pageSetup.setFooterDistance(0.2)
doc.save(dataDir + "PageBorders.docx")
print "Done."
def __init__(self):
dataDir = Settings.dataDir + 'programming_documents/'
doc = Document()
builder = DocumentBuilder(doc)
pageSetup = builder.getPageSetup()
pageSetup.setTopMargin(0.5)
pageSetup.setBottomMargin(0.5)
pageSetup.setLeftMargin(0.5)
pageSetup.setRightMargin(0.5)
pageSetup.setHeaderDistance(0.2)
pageSetup.setFooterDistance(0.2)
doc.save(dataDir + "PageBorders.docx")
print "Done."
def extract_content_using_field(self, doc):
"""
Shows how to extract content between a specific field and paragraph in the document using the ExtractContent method.
"""
# Use a document builder to retrieve the field start of a merge field.
builder = DocumentBuilder(doc)
# Pass the first boolean parameter to get the DocumentBuilder to move to the FieldStart of the field.
# We could also get FieldStarts of a field using GetChildNode method as in the other examples.
builder.moveToMergeField("Fullname", False, False)
# The builder cursor should be positioned at the start of the field.
startField = builder.getCurrentNode()
endPara = doc.getFirstSection().getChild(NodeType.PARAGRAPH, 5, True)
# Extract the content between these nodes in the document. Don't include these markers in the extraction.
extractedNodes = self.extract_contents(startField, endPara, False)
# Insert the content into a new separate document and save it to disk.
dstDoc = self.generate_document(doc, extractedNodes)
dstDoc.save(self.dataDir + "TestFile.Fields Out.pdf")
def __init__(self):
dataDir = Settings.dataDir + 'programming_documents/'
doc = Document()
builder = DocumentBuilder(doc)
builder.insertImage(dataDir + "background.jpg");
builder.insertImage(dataDir + "background.jpg",
RelativeHorizontalPosition.MARGIN,
100,
RelativeVerticalPosition.MARGIN,
200,
200,
100,
WrapType.SQUARE)
doc.save(dataDir + "InsertImage.docx")
print "Done."
def __init__(self):
dataDir = Settings.dataDir + 'quickstart/'
# Demonstrates how to insert fields and update them using Aspose.Words.
# First create a blank document.
doc = Document()
# Use the document builder to insert some content and fields.
builder = DocumentBuilder(doc)
# Insert a table of contents at the beginning of the document.
builder.insertTableOfContents("\\o \"1-3\" \\h \\z \\u")
builder.writeln()
# Insert some other fields.
builder.write("Page: ")
builder.insertField("PAGE")
builder.write(" of ")
builder.insertField("NUMPAGES")
builder.writeln()
builder.write("Date: ")
builder.insertField("DATE")
# Start the actual document content on the second page.
builder.insertBreak(BreakType.SECTION_BREAK_NEW_PAGE)
# Build a document with complex structure by applying different heading styles thus creating TOC entries.
builder.getParagraphFormat().setStyleIdentifier(StyleIdentifier.HEADING_1)
builder.writeln("Heading 1")
builder.getParagraphFormat().setStyleIdentifier(StyleIdentifier.HEADING_2)
builder.writeln("Heading 1.1")
builder.writeln("Heading 1.2")
builder.getParagraphFormat().setStyleIdentifier(StyleIdentifier.HEADING_1)
builder.writeln("Heading 2")
builder.writeln("Heading 3")
# Move to the next page.
builder.insertBreak(BreakType.PAGE_BREAK)
builder.getParagraphFormat().setStyleIdentifier(StyleIdentifier.HEADING_2)
builder.writeln("Heading 3.1")
builder.getParagraphFormat().setStyleIdentifier(StyleIdentifier.HEADING_3)
builder.writeln("Heading 3.1.1")
builder.writeln("Heading 3.1.2")
builder.writeln("Heading 3.1.3")
builder.getParagraphFormat().setStyleIdentifier(StyleIdentifier.HEADING_2)
builder.writeln("Heading 3.2")
builder.writeln("Heading 3.3")
print "Updating all fields in the document."
# Call the method below to update the TOC.
doc.updateFields()
doc.save(dataDir + "Document Field Update Out.docx")
print "Fields updated in the document successfully."
def __init__(self):
dataDir = Settings.dataDir + 'programming_documents/'
doc = Document()
builder = DocumentBuilder(doc)
# Insert few page breaks (just for testing)
i = 0
while(i < 5):
builder.insertBreak(BreakType.PAGE_BREAK)
i = i + 1
# Move DocumentBuilder cursor into the primary footer.
builder.moveToHeaderFooter(HeaderFooterType.FOOTER_PRIMARY)
# We want to insert a field like this:
# { IF {PAGE} <> {NUMPAGES} "See Next Page" "Last Page" }
field = builder.insertField("IF ")
builder.moveTo(field.getSeparator())
builder.insertField("PAGE")
builder.write(" <> ")
builder.insertField("NUMPAGES")
builder.write(" \"See Next Page\" \"Last Page\" ")
# Finally update the outer field to recalcaluate the final value. Doing this will automatically update
# the inner fields at the same time.
field.update()
doc.save(dataDir + "InsertNestedFields Out.docx")
def __init__(self):
dataDir = Settings.dataDir + 'programming_documents/'
doc = Document()
builder = DocumentBuilder(doc)
# Insert few page breaks (just for testing)
i = 0
while (i < 5):
builder.insertBreak(BreakType.PAGE_BREAK)
i = i + 1
# Move DocumentBuilder cursor into the primary footer.
builder.moveToHeaderFooter(HeaderFooterType.FOOTER_PRIMARY)
# We want to insert a field like this:
# { IF {PAGE} <> {NUMPAGES} "See Next Page" "Last Page" }
field = builder.insertField("IF ")
builder.moveTo(field.getSeparator())
builder.insertField("PAGE")
builder.write(" <> ")
builder.insertField("NUMPAGES")
builder.write(" \"See Next Page\" \"Last Page\" ")
# Finally update the outer field to recalcaluate the final value. Doing this will automatically update
# the inner fields at the same time.
field.update()
doc.save(dataDir + "InsertNestedFields Out.docx")
def __init__(self):
dataDir = Settings.dataDir + 'programming_documents/'
doc = Document(dataDir + "document.doc")
builder = DocumentBuilder(doc)
#Shows how to access the current node in a document builder.
curNode = builder.getCurrentNode()
curParagraph = builder.getCurrentParagraph()
# Shows how to move a cursor position to a specified node.
builder.moveTo(doc.getFirstSection().getBody().getLastParagraph())
# Shows how to move a cursor position to the beginning or end of a document.
builder.moveToDocumentEnd()
builder.writeln("This is the end of the document.")
builder.moveToDocumentStart()
builder.writeln("This is the beginning of the document.")
doc.save(dataDir + "MovingCursor.doc")
print "Done."
def __init__(self):
dataDir = Settings.dataDir + 'quickstart/'
# Demonstrates how to insert fields and update them using Aspose.Words.
# First create a blank document.
doc = Document()
# Use the document builder to insert some content and fields.
builder = DocumentBuilder(doc)
# Insert a table of contents at the beginning of the document.
builder.insertTableOfContents("\\o \"1-3\" \\h \\z \\u")
builder.writeln()
# Insert some other fields.
builder.write("Page: ")
builder.insertField("PAGE")
builder.write(" of ")
builder.insertField("NUMPAGES")
builder.writeln()
builder.write("Date: ")
builder.insertField("DATE")
# Start the actual document content on the second page.
builder.insertBreak(BreakType.SECTION_BREAK_NEW_PAGE)
# Build a document with complex structure by applying different heading styles thus creating TOC entries.
builder.getParagraphFormat().setStyleIdentifier(
StyleIdentifier.HEADING_1)
builder.writeln("Heading 1")
builder.getParagraphFormat().setStyleIdentifier(
StyleIdentifier.HEADING_2)
builder.writeln("Heading 1.1")
builder.writeln("Heading 1.2")
builder.getParagraphFormat().setStyleIdentifier(
StyleIdentifier.HEADING_1)
builder.writeln("Heading 2")
builder.writeln("Heading 3")
# Move to the next page.
builder.insertBreak(BreakType.PAGE_BREAK)
builder.getParagraphFormat().setStyleIdentifier(
StyleIdentifier.HEADING_2)
builder.writeln("Heading 3.1")
builder.getParagraphFormat().setStyleIdentifier(
StyleIdentifier.HEADING_3)
builder.writeln("Heading 3.1.1")
builder.writeln("Heading 3.1.2")
builder.writeln("Heading 3.1.3")
builder.getParagraphFormat().setStyleIdentifier(
StyleIdentifier.HEADING_2)
builder.writeln("Heading 3.2")
builder.writeln("Heading 3.3")
print "Updating all fields in the document."
# Call the method below to update the TOC.
doc.updateFields()
doc.save(dataDir + "Document Field Update Out.docx")
print "Fields updated in the document successfully."