def test_all_supported_can_speed(self, bl, canSpeed):
# Change the can speed
bl.set_CAN_parameters(canSpeed)
common_util.reset_with_check(bl)
# 1. Get available flash region
availableRegionStartAddress, availableRegionEndAddress, availableRegionSize = common_util.get_available_memory_region(bl, 'flash')
# 2. Erase all the available flash region
status, results = bl.flash_erase_region(availableRegionStartAddress, availableRegionSize)
assert status == bootloader.status.kStatus_Success
# 3. Program all the available flash region
randomFile = common_util.generate_random_data_file(bl, availableRegionStartAddress, availableRegionSize)
status, results = bl.write_memory(availableRegionStartAddress, randomFile)
assert status == bootloader.status.kStatus_Success
# 4. Read back the data
readFile = os.path.join(bl.vectorsDir, 'read_data_from_memory.bin')
status, results = bl.read_memory(availableRegionStartAddress, availableRegionSize, readFile)
assert status == bootloader.status.kStatus_Success
# 5. Verify data
randomFileObj = file(randomFile, 'rb')
data1 = randomFileObj.read()
readFileObj = file(readFile, 'rb')
data2 = readFileObj.read()
assert data1 == data2
def setup(self, bl, request):
common_util.reset_with_check(bl)
def teardown():
pass
request.addfinalizer(teardown)
def setup(self, bl, request):
common_util.reset_with_check(bl)
def teardown():
common_util.erase_all_available_flash_unsecure(bl)
request.addfinalizer(teardown)
def setup(self, bl, request):
if (bltest_config.projectName.lower() == 'rom_bootloader_tower') or \
(bltest_config.projectName.lower() == 'rom_bootloader_freedom'):
pytest.skip('Does not support flash_resident bootloader.' )
common_util.reset_with_check(bl)
def teardown_method():
pass
request.addfinalizer(teardown_method)
def setup(self, bl, request):
common_util.reset_with_check(bl)
# Write QSPI config block data to RAM and config QSPI module.
config_QSPI_flash(bl, kQspiConfigBlockFile, 'ram')
def teardown():
pass
request.addfinalizer(teardown)
def setup(self, bl, request):
if not bl.target.isSwReliableUpdateSupported:
pytest.skip('%s does not support SW reliable update.' %
(bl.target.targetName))
common_util.reset_with_check(bl)
#erase app vector region
status, result = bl.flash_erase_region(
bl.target.BL_APP_VECTOR_TABLE_ADDRESS, 0x1000)
assert status == bootloader.status.kStatus_Success
def setup(self, bl, request):
common_util.reset_with_check(bl)
initOtfadDecryption()
def teardown():
# We should use JLink to unlock the device so that JLink can connect with the device and reset the device.
bl.target.unlock()
common_util.reset_without_check(bl)
request.addfinalizer(teardown)
def setup(self, request, bl):
common_util.reset_with_check(bl)
common_util.erase_all_available_flash_unsecure(bl)
def teardown():
if bl.target.hasErasableIFR:
bl.target.unlock()
else:
pass
request.addfinalizer(teardown)
def setup(self, request, bl):
common_util.reset_with_check(bl)
common_util.erase_all_available_flash_unsecure(bl)
status, results = bl.reset()
time.sleep(3)
assert status == bootloader.status.kStatus_Success
def teardown():
common_util.erase_all_available_flash_unsecure(bl)
request.addfinalizer(teardown)
def setup(self, request, bl):
common_util.reset_with_check(bl)
def skipif(bl, request):
common_util.reset_with_check(bl)
if (commands.kCommandMask_call
& common_util.get_available_commands(bl)) == 0:
pytest.skip('%s does not support call command.' %
(bl.target['targetName']))
def skipif(bl, request):
common_util.reset_with_check(bl)
if (commands.kCommandMask_receiveSbFile
& common_util.get_available_commands(bl)) == 0:
pytest.skip('%s does not support the receive-sb-file command.' %
(bl.target.targetName))
def setup(self, request, bl):
common_util.reset_with_check(bl)
bl.flash_erase_region(bl.target.BL_APP_VECTOR_TABLE_ADDRESS, 0x1000)
time.sleep(2)
def skipif(bl, request):
common_util.reset_with_check(bl)
if (commands.kCommandMask_fillMemory
& common_util.get_available_commands(bl)) == 0:
pytest.skip('%s does not support the fill-memory command.' %
(bl.target.targetName))