def main():
mat_file_name = sys.argv[1]
limits_dict, filter = read_limits()
filter.append('SpeedSensor.v')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
# No need to convert values into string that is done in update_metrics_in_report_json
metrics.update({
'MaximumSpeed': {
'value': pp.global_abs_max('SpeedSensor.v'),
'unit': 'm/s'
}
})
metrics.update({
'MaximumSpeed10': {
'value': pp.global_abs_max('SpeedSensor.v') * 10,
'unit': 'm/s'
}
})
cwd = os.getcwd()
os.chdir('..')
update_metrics_in_report_json(metrics)
check_limits_and_add_to_report_json(pp, limits_dict)
os.chdir(cwd)
def main():
mat_file_name = sys.argv[1]
limits_dict, filter = read_limits()
filter.append('SpeedSensor.v')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
# No need to convert values into string that is done in update_metrics_in_report_json
metrics.update({'MaximumSpeed' : {'value': pp.global_max('SpeedSensor.v'), 'unit': 'm/s'}})
cwd = os.getcwd()
os.chdir('..')
update_metrics_in_report_json(metrics)
check_limits_and_add_to_report_json(pp, limits_dict)
os.chdir(cwd)
def main():
mat_file_name = sys.argv[1]
limits_dict, filter = read_limits()
filter.append("SpeedSensor.v")
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
# No need to convert values into string that is done in update_metrics_in_report_json
metrics.update({"MaxSpeed": {"value": pp.global_abs_max("SpeedSensor.v"), "unit": "m/s"}})
cwd = os.getcwd()
os.chdir("..")
update_metrics_in_report_json(metrics)
check_limits_and_add_to_report_json(pp, limits_dict)
os.chdir(cwd)
from common import PostProcess, update_metrics_in_report_json, read_limits, check_limits_and_add_to_report_json
if __name__ == '__main__':
if len(sys.argv) > 1:
try:
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(
sys.argv[1])
os._exit(3)
limits_dict, filter = read_limits()
filter.append('VoltageSensor.v')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
# No need to convert values into string that is done in update_metrics_in_report_json
metrics.update({
'VoltageOverInductor': {
'value': pp.global_max('VoltageSensor.v'),
'unit': 'Volt'
}
})
metrics.update({
'VoltageOverInductor10': {
'value': pp.global_max('VoltageSensor.v') * 10,
'unit': 'deciVolt'
}
})
if __name__ == '__main__':
if len(sys.argv) > 1:
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.vehicleSpeed')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
speed_array = pp.data_array("road_Wheel_Load_Both_Sides.vehicleSpeed")
time_array = pp.time_array()
n = len(speed_array)
acc10kph = -1
points = range(n)
for i in points:
if speed_array[i] < -10:
acc10kph = time_array[i]
break
max_rev_speed = speed_array[-1]
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append(
'road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.vehicleSpeed'
)
filter.append(
'road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.Accel_20kph'
)
filter.append('design_v1.EngineHeatPort.T')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
metrics.update({
'MaxVehicleSpeed': {
'value':
pp.global_abs_max(
"road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.vehicleSpeed"
),
'unit':
'kph'
}
})
metrics.update({
'Acc20kph': {
'value':
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print "Given result file does not exist: {0}".format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append("road_Wheel_Load_Both_Sides.vehicleSpeed")
filter.append("road_Wheel_Load_Both_Sides.Accel_20kph")
filter.append("design_v1.EngineHeatPort.T")
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
metrics.update(
{"MaxVehicleSpeed": {"value": pp.global_abs_max("road_Wheel_Load_Both_Sides.vehicleSpeed"), "unit": "kph"}}
)
metrics.update({"Acc20kph": {"value": pp.last_value("road_Wheel_Load_Both_Sides.Accel_20kph"), "unit": "s"}})
metrics.update(
{"EngineTemperature": {"value": pp.last_value("design_v1.EngineHeatPort.T") - 273.15, "unit": "C"}}
)
cwd = os.getcwd()
os.chdir("..")
update_metrics_in_report_json(metrics)
## end of postprocessing part
from common import PostProcess, update_metrics_in_report_json
from common import read_limits, check_limits_and_add_to_report_json
if __name__ == '__main__':
if len(sys.argv) > 1:
try:
mat_file_name = sys.argv[1]
## First limit part
limit_dict, filter = read_limits()
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.vehicleSpeed')
filter.append('road_Wheel_Load_Both_Sides.Accel_20kph')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
metrics.update({
'VehicleSpeed': {
'value':
pp.global_abs_max(
"road_Wheel_Load_Both_Sides.vehicleSpeed"),
'unit':
'kph'
}
})
metrics.update({
'Acc20kph': {
'value':
pp.last_value('road_Wheel_Load_Both_Sides.Accel_20kph'),
import os
from common import PostProcess, update_metrics_in_report_json, read_limits, check_limits_and_add_to_report_json
if __name__ == '__main__':
if len(sys.argv) > 1:
try:
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
limits_dict, filter = read_limits()
filter.append('VoltageSensor.v')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
# No need to convert values into string that is done in update_metrics_in_report_json
metrics.update({'VoltageOverInductor' : {'value': pp.global_max('VoltageSensor.v'), 'unit': 'V'}})
cwd = os.getcwd()
os.chdir('..')
update_metrics_in_report_json(metrics)
check_limits_and_add_to_report_json(pp, limits_dict)
os.chdir(cwd)
except Exception as err:
print err.message
if os.name == 'nt':
import win32api
def main():
print "in main....."
sampleRate = 0.10
startAnalysisTime = 50
f = open('rawdata.csv', 'w')
mat_file_name = sys.argv[1]
print "Mat file name is " + mat_file_name
if not os.path.exists(mat_file_name):
raise IOError('Given result file does not exist: {0}'.format(
sys.argv[1]))
else:
dstpath = os.path.join(os.getcwd(), 'matfiles')
if not os.path.isdir(dstpath):
os.makedirs(dstpath)
numFiles = len(os.listdir(dstpath))
dstname = '_' + str(numFiles) + mat_file_name
shutil.copyfile(mat_file_name, os.path.join(dstpath, dstname))
print "Line 24: Opened " + mat_file_name
## First limit part
limit_dict, filter = read_limits()
print "done limits"
filter = []
## End of first limit part
## Post processing part
#--------accelerations-----------------------------------------------
#---------------------------------------------------------------------------------
# Processing
#---------------------------------------------------------------------------------
# loads results with the filtered out variables (and 'time' which is default)
filter = []
pp = PostProcess(mat_file_name, filter)
vars_available = pp.get_names()
dumpList = []
print vars_available[1]
for vv in vars_available:
if vv.find("current_") != -1:
print "add to dumpList: " + vv
dumpList.append(vv)
if vv.find("voltage_") != -1:
print "add to dumpList: " + vv
dumpList.append(vv)
if vv.find("angle_") != -1:
print "add to dumpList: " + vv
dumpList.append(vv)
pp.print_time()
print "Last time is " + str(pp.get_max_time())
sampData = []
for vv in dumpList:
ndat = pp.resample_data(vv, sampleRate)
print "got ndat size=", len(ndat)
sampData.append(ndat)
print 'sampdata=', len(sampData), 'cols', len(sampData[0]), 'rows'
i = 0
print "dumping raw data headers"
for c, vv in enumerate(dumpList):
print vv, c
f.write(vv + ',')
f.write("\n")
print "dump data"
print len(sampData), 'cols', len(sampData[0])
while i < len(sampData[0]):
if i % 1000 == 0:
print "line ", i
for c, vv in enumerate(dumpList):
f.write(str(sampData[c][i]) + ',')
f.write("\n")
i = i + 1
f.close()
actAngleIdx = -1
setAngleIdx = -1
voltBusIdx = -1
currGyroIdx = -1
for c, vv in enumerate(dumpList):
if vv.find("angle_set") != -1:
setAngleIdx = c
if vv.find("angle_act") != -1:
actAngleIdx = c
if vv.find("voltage_bus") != -1:
voltBusIdx = c
if vv.find("current_gyro") != -1:
currGyroIdx = c
print "gyro idx ", currGyroIdx
maxErr = 0
sumErr = 0
avgErr = 0
maxBusV = -1
minBusV = 100
minBattCap = 100
maxGyroCurr = 0
if actAngleIdx != -1 and setAngleIdx != -1:
i = int(startAnalysisTime / sampleRate)
first = i
print "scanning angles from ", i, " to ", len(sampData[setAngleIdx])
while i < len(sampData[setAngleIdx]):
angErr = abs(sampData[setAngleIdx][i] - sampData[actAngleIdx][i])
if angErr > maxErr:
maxErr = angErr
sumErr = sumErr + angErr
i = i + 1
avgErr = sumErr / (i - first + 1)
if voltBusIdx != -1:
i = int(startAnalysisTime / sampleRate)
while i < len(sampData[voltBusIdx]):
vts = abs(sampData[voltBusIdx][i])
if vts > maxBusV:
maxBusV = vts
if vts < minBusV:
minBusV = vts
i = i + 1
if currGyroIdx != -1:
i = int(startAnalysisTime / sampleRate)
print "scanning Gyro currents from ", i, " to ", len(
sampData[currGyroIdx])
while i < len(sampData[currGyroIdx]):
vts = abs(sampData[currGyroIdx][i])
if vts > maxGyroCurr:
maxGyroCurr = vts
print vts
i = i + 1
output_dir = "../"
json_filename = os.path.join(output_dir, 'testbench_manifest.json')
import json
json_data = {}
if os.path.isfile(json_filename):
with open(json_filename, "r") as json_file:
print "reading json"
json_data = json.load(json_file)
print "json_data is....."
print json_data
for metric in json_data['Metrics']:
if metric["Name"] == "angleMaxError":
metric["Value"] = str(maxErr)
if metric["Name"] == "angleAvgError":
metric["Value"] = str(avgErr)
if metric["Name"] == "minBusVoltage":
metric["Value"] = str(minBusV)
if metric["Name"] == "maxBusVoltage":
metric["Value"] = str(maxBusV)
if metric["Name"] == "minBattCapacity":
metric["Value"] = str(minBattCap)
if metric["Name"] == "maxGyroCurrent":
metric["Value"] = str(maxGyroCurr)
print "dumping to ", json_filename
print json_data
with open(json_filename, "w") as json_file:
json.dump(json_data, json_file, indent=4)
# #---------------------------------------------------------------------------------
# # Potential_Design
# #---------------------------------------------------------------------------------
# Potential_Design = 0
# followTime = pp.get_data_by_index(followTime_uri, -1)
# if (SettlingTime == -1 or riseTime == -1 or minDistance < .1*minDistanceVelocity*followTime):
# Potential_Design = -1
# else: Potential_Design = 1
# print "Potential_Design: %d" %Potential_Design
# #---------------------------------------------------------------------------------
# # Metrics
# #---------------------------------------------------------------------------------
# metrics = {}
# metrics.update({'vehicleMass':{'value': vehicleMass, 'unit':'kg'},
# 'distanceTraveled':{'value': distanceTraveled, 'unit': 'm'},
# 'minDistance': {'value': minDistance, 'unit': 'm'},
# 'finalVelocity':{'value': Vf, 'unit': 'm/s'},
# 'requiredTorque':{'value': requiredTorque, 'unit':'N-m'},
# 'riseTime':{'value': np.amax(riseTime), 'unit' :''},
# 'Overshoot':{'value': np.amax(Overshoot), 'unit' :''},
# 'settlingTime':{'value': np.amax(SettlingTime), 'unit' :''},
# 'rms_error':{'value': RMS_error, 'unit' : ''},
# 'numSetpointCrossings':{'value':numSetPointCrossings, 'unit': ''},
# 'averageA': {'value': maxAccel, 'unit': 'm/s2'},
# 'averageJ': {'value': maxJerk, 'unit': 'm/s3'},
# 'Potential_Design': {'value': Potential_Design, 'unit': ''},
# #'chassisType':{'value': chassisType, 'unit' :''},
# })
#print metrics
cwd = os.getcwd()
os.chdir('..')
# print 'Plot saved to : {0}'.format(pp.save_as_svg(vehicle_speed,
# pp.global_abs_max(vehicle_speed),
# 'VehicleSpeed',
# 'max(FTP_Driver.driver_bus.vehicle_speed)',
# 'kph'))
#pp.store_data_to_csv(jerk_uri, '{0}.csv'.format(jerk_uri), 0, time_inc, numSamples)
#pp.store_data_to_csv(a_uri, '{0}.csv'.format(a_uri), 0, time_inc, numSamples)
#pp.store_data_to_csv(pp.time_array, '{0}.csv'.format(pp.time_array), 0, time_inc, numSamples)
#pp.store_data_to_csv(boomCylLength_uri, '{0}.csv'.format(boomCylLength_uri), 0, time_inc, numSamples)
#pp.store_data_to_csv(armCylLength_uri, '{0}.csv'.format(armCylLength_uri), 0, time_inc, numSamples)
#pp.store_data_to_csv(bucketCylLength_uri, '{0}.csv'.format(bucketCylLength_uri), 0, time_inc, numSamples)
#pp.store_data_to_csv(boomCylRPressure_uri, '{0}.csv'.format(boomCylRPressure_uri), 0, 0.1, dur)
#pp.store_data_to_csv(arm_ang_vel_uri, '{0}.csv'.format(arm_ang_vel_uri), 0, 0.1, dur)
#pp.store_data_to_csv(max_Y_uri, '{0}.csv'.format(max_Y_uri), 0, 0.1, dur)
#pp.store_data_to_csv(max_reach_uri, '{0}.csv'.format(max_reach_uri), 0, 0.1, dur)
#pp.store_data_to_csv(State_uri, '{0}.csv'.format(State_uri), 0, 0.1, dur)
## end of postprocessing part
## Second limit part
#check_limits_and_add_to_report_json(pp, limit_dict)
#update_metrics_in_report_json(metrics)
## end of Second limit part
os.chdir(cwd)
print "done main"
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.vehicleSpeed')
filter.append('driver_Land_Profile.ModelicaModel_Driver_Land_Profile.driver_control.error_current.y')
filter.append('driver_Land_Profile.ModelicaModel_Driver_Land_Profile.driver_control.error_current.u2')
#filter.append('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.Accel_40kph')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
t = pp.time
# Liters of fuel used per 100km
volume_var_name = [var_name for var_name in filter if var_name.endswith('tank.V')][0]
volume = pp.data_array(volume_var_name)
fuel_used = (volume[0] - volume[-1])*1000
distance_covered_m = pp.integrate('driver_Land_Profile.ModelicaModel_Driver_Land_Profile.driver_control.error_current.u2')
if distance_covered_m != 0:
fuel_consumption = fuel_used/(distance_covered_m*1000*100)
else:
fuel_consumption = -1
#vehicle_speed_SI = pp.data_array('driver_Land_Profile.ModelicaModel_Driver_Land_Profile.driver_control.error_current.u2')
# Deviation from requested speed
e = pp.data_array('driver_Land_Profile.ModelicaModel_Driver_Land_Profile.driver_control.error_current.y')
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.vehicleSpeed')
filter.append('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.Accel_20kph')
filter.append('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.Accel_40kph')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
#pressure_variable_name = [var_name for var_name in filter if var_name.endswith('hot_fluid_out.p')][0]
metrics = {}
metrics.update({'VehicleSpeed': {'value': pp.global_abs_max("road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.vehicleSpeed"), 'unit': 'kph'}})
metrics.update({'Acc20kph': {'value': pp.last_value('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.Accel_20kph'), 'unit': 's'}})
metrics.update({'Acc40kph': {'value': pp.last_value('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.Accel_40kph'), 'unit': 's'}})
#metrics.update({'EngineAirPressure': {'value': pp.last_value(pressure_variable_name), 'unit': 'Pascal'}})
update_metrics_in_report_json(metrics)
## end of postprocessing part
## Second limit part
check_limits_and_add_to_report_json(pp, limit_dict)
## end of Second limit part
import os
from common import PostProcess, update_metrics_in_report_json, read_limits, check_limits_and_add_to_report_json
if __name__ == '__main__':
if len(sys.argv) > 1:
try:
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
limits_dict, filter = read_limits()
filter.append('VoltageSensor.v')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
# No need to convert values into string that is done in update_metrics_in_report_json
metrics.update({'VoltageOverInductor' : {'value': pp.global_max('VoltageSensor.v'), 'unit': 'Volt'}})
metrics.update({'VoltageOverInductor10' : {'value': pp.global_max('VoltageSensor.v') * 10, 'unit': 'deciVolt'}})
metrics.update({'VoltageOverInductor100' : {'value': pp.global_max('VoltageSensor.v') * 100, 'unit': 'centiVolt'}})
cwd = os.getcwd()
os.chdir('..')
update_metrics_in_report_json(metrics)
check_limits_and_add_to_report_json(pp, limits_dict)
os.chdir(cwd)
except Exception as err:
print err.message
if os.name == 'nt':
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.vehicleSpeed')
filter.append('driver_Land_Profile.driver_control.error_current.y')
filter.append('driver_Land_Profile.driver_control.error_current.u2')
#filter.append('road_Wheel_Load_Both_Sides.Accel_40kph')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
t = pp.time
# Liters of fuel used per 100km
#volume_var_name = [var_name for var_name in filter if var_name.endswith('tank.V')][0]
#volume = pp.data_array(volume_var_name)
fuel_used = 1 #(volume[0] - volume[-1])*1000
distance_covered_m = pp.integrate(
'driver_Land_Profile.driver_control.error_current.u2')
if distance_covered_m != 0:
fuel_consumption = fuel_used / (distance_covered_m * 1000 * 100)
else:
fuel_consumption = -1
#vehicle_speed_SI = pp.data_array('driver_Land_Profile.driver_control.error_current.u2')
# Deviation from requested speed
e = pp.data_array('driver_Land_Profile.driver_control.error_current.y')
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print "Given result file does not exist: {0}".format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append("road_Wheel_Load_Both_Sides.vehicleSpeed")
filter.append("road_Wheel_Load_Both_Sides.Accel_20kph")
filter.append("road_Wheel_Load_Both_Sides.Accel_40kph")
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
# pressure_variable_name = [var_name for var_name in filter if var_name.endswith('hot_fluid_out.p')][0]
metrics = {}
metrics.update(
{"VehicleSpeed": {"value": pp.global_abs_max("road_Wheel_Load_Both_Sides.vehicleSpeed"), "unit": "kph"}}
)
metrics.update({"Acc20kph": {"value": pp.last_value("road_Wheel_Load_Both_Sides.Accel_20kph"), "unit": "s"}})
metrics.update({"Acc40kph": {"value": pp.last_value("road_Wheel_Load_Both_Sides.Accel_40kph"), "unit": "s"}})
# metrics.update({'EngineAirPressure': {'value': pp.last_value(pressure_variable_name), 'unit': 'Pascal'}})
cwd = os.getcwd()
os.chdir("..")
print "Plot saved to : {0}".format(
pp.save_as_svg(
"road_Wheel_Load_Both_Sides.vehicleSpeed",
pp.global_abs_max("road_Wheel_Load_Both_Sides.vehicleSpeed"),
from common import PostProcess, update_metrics_in_report_json, read_limits, check_limits_and_add_to_report_json
if __name__ == '__main__':
if len(sys.argv) > 1:
try:
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(
sys.argv[1])
os._exit(3)
limits_dict, filter = read_limits()
filter.append('SpeedSensor.v')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
# No need to convert values into string that is done in update_metrics_in_report_json
metrics.update({
'Velocity': {
'value': pp.global_abs_max('SpeedSensor.v'),
'unit': 'm/s'
}
})
cwd = os.getcwd()
os.chdir('..')
update_metrics_in_report_json(metrics)
check_limits_and_add_to_report_json(pp, limits_dict)
def main():
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
raise IOError('Given result file does not exist: {0}'.format(
sys.argv[1]))
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
bucketCylLength_uri = 'Excavator_.bucketCylLength_unit'
filter.append(bucketCylLength_uri)
armCylLength_uri = 'Excavator_.armCylLength_unit'
filter.append(armCylLength_uri)
boomCylLength_uri = 'Excavator_.boomCylLength_unit'
filter.append(boomCylLength_uri)
boomCylRPressure_uri = 'Excavator_.boomCylLPressure_a'
filter.append(boomCylRPressure_uri)
armCylPressure_uri = 'Excavator_.armCylPressure_a'
filter.append(armCylPressure_uri)
bucketCylPressure_uri = 'Excavator_.bucketCylPressure_a'
filter.append(bucketCylPressure_uri)
arm_ang_vel_uri = 'Excavator_.arm_ang_vel'
filter.append(arm_ang_vel_uri)
max_Y_uri = 'Excavator_.yDistance'
filter.append(max_Y_uri)
max_reach_uri = 'Excavator_.xDistance'
filter.append(max_reach_uri)
swing_uri = 'Excavator_.carriage2.swingRevolute.w'
filter.append(swing_uri)
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
max_p_time = pp.global_max_time(boomCylRPressure_uri)
max_v_time = pp.global_max_time(arm_ang_vel_uri)
print 'Maximum pressure obtained at : {0}'.format(max_p_time)
max_p_time = pp.global_max_time(armCylPressure_uri)
print 'Maximum pressure obtained at : {0}'.format(max_p_time)
max_p_time = pp.global_max_time(bucketCylPressure_uri)
print 'Maximum pressure obtained at : {0}'.format(max_p_time)
print 'Maximum velocity obtained at : {0}'.format(max_v_time)
print 'Maximum Reach obtained at : {0}'.format(
pp.global_max_time(max_reach_uri))
metrics = {}
metrics.update({
'bucketCylLength_unit': {
'value': pp.get_data_by_time(bucketCylLength_uri, max_p_time)[0],
'unit': 'm'
},
'boomCylLength_unit': {
'value': pp.get_data_by_time(boomCylLength_uri, max_p_time)[0],
'unit': 'm'
},
'boomCylRPressure': {
'value': pp.global_abs_max(boomCylRPressure_uri) * 0.00001,
'unit': 'bar'
},
'armCylLength_unit': {
'value': pp.get_data_by_time(armCylLength_uri, max_p_time)[0],
'unit': 'm'
},
'armCylPressure': {
'value': pp.global_abs_max(armCylPressure_uri) * 0.00001,
'unit': 'bar'
},
'bucketCylPressure': {
'value': pp.global_abs_max(bucketCylPressure_uri) * 0.00001,
'unit': 'bar'
},
'arm_angVel': {
'value': pp.global_abs_max(arm_ang_vel_uri),
'unit': 'rads/s'
},
'max_reach': {
'value': pp.global_max(max_reach_uri),
'unit': 'm'
},
'max_high_reach': {
'value': pp.global_max(max_Y_uri),
'unit': 'm'
},
'max_low_reach': {
'value': pp.global_min(max_Y_uri),
'unit': 'm'
},
'swing_speed': {
'value': pp.last_value(swing_uri),
'unit': 'rad/s'
},
})
cwd = os.getcwd()
os.chdir('..')
# print 'Plot saved to : {0}'.format(pp.save_as_svg(vehicle_speed,
# pp.global_abs_max(vehicle_speed),
# 'VehicleSpeed',
# 'max(FTP_Driver.driver_bus.vehicle_speed)',
# 'kph'))
pp.store_data_to_csv(bucketCylLength_uri,
'{0}.csv'.format(bucketCylLength_uri), 0, 0.1, 200)
pp.store_data_to_csv(armCylLength_uri, '{0}.csv'.format(armCylLength_uri),
0, 0.1, 200)
pp.store_data_to_csv(boomCylLength_uri,
'{0}.csv'.format(boomCylLength_uri), 0, 0.1, 200)
pp.store_data_to_csv(boomCylRPressure_uri,
'{0}.csv'.format(boomCylRPressure_uri), 0, 0.1, 200)
pp.store_data_to_csv(arm_ang_vel_uri, '{0}.csv'.format(arm_ang_vel_uri), 0,
0.1, 200)
pp.store_data_to_csv(max_Y_uri, '{0}.csv'.format(max_Y_uri), 0, 0.1, 500)
pp.store_data_to_csv(max_reach_uri, '{0}.csv'.format(max_reach_uri), 0,
0.1, 200)
update_metrics_in_report_json(metrics)
## end of postprocessing part
## Second limit part
check_limits_and_add_to_report_json(pp, limit_dict)
## end of Second limit part
os.chdir(cwd)
def main():
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
raise IOError('Given result file does not exist: {0}'.format(sys.argv[1]))
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
bucketCylLength_uri = 'Excavator_.bucketCylLength_unit'
filter.append(bucketCylLength_uri)
armCylLength_uri = 'Excavator_.armCylLength_unit'
filter.append(armCylLength_uri)
boomCylLength_uri = 'Excavator_.boomCylLength_unit'
filter.append(boomCylLength_uri)
boomCylRPressure_uri = 'Excavator_.boomCylLPressure_a'
filter.append(boomCylRPressure_uri)
armCylPressure_uri = 'Excavator_.armCylPressure_a'
filter.append(armCylPressure_uri)
bucketCylPressure_uri = 'Excavator_.bucketCylPressure_a'
filter.append(bucketCylPressure_uri)
arm_ang_vel_uri = 'Excavator_.arm_ang_vel'
filter.append(arm_ang_vel_uri)
max_Y_uri = 'Excavator_.yDistance'
filter.append(max_Y_uri)
max_reach_uri = 'Excavator_.xDistance'
filter.append(max_reach_uri)
State_uri = 'operator_Full.State_1'
filter.append(State_uri)
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
max_p_time = pp.global_max_time(boomCylRPressure_uri)
max_v_time = pp.global_max_time(arm_ang_vel_uri)
#max_p_time = pp.global_max_time(armCylPressure_uri)
#max_p_time = pp.global_max_time(bucketCylPressure_uri)
print 'Maximum pressure obtained at : {0}'.format(max_p_time)
print 'Maximum velocity obtained at : {0}'.format(max_v_time)
print 'Maximum Reach obtained at : {0}'.format(pp.global_max_time(max_reach_uri))
print 'Max reach is : {0}'.format(pp.global_max(max_reach_uri))
time = pp.get_time(State_uri,2)
print 'First entry of State 2 at : {0}'.format(time)
index = pp.get_index_from_time(time)
print 'first entry of state2 index : {0}'.format(index)
time2 = pp.get_time(State_uri, 4)
print 'Exit of state 2 at : {0}'.format(time2)
index2 = pp.get_index_from_time(time2)
print 'Exit of state 2 index : {0}'.format(index2)
time3 = pp.get_time(State_uri,2,1e-4,1e-4,index2+1)
print '2nd entry of state 2 : {0}'.format(time3)
index3 = pp.get_index_from_time(time3)
print 'index of second entry of state 2 : {0}'.format(index3)
dt = pp.delta_t(index, index3)
print 'Cycle Time : {0}'.format(dt)
initTime = pp.get_index_from_time(1)
armPressure = pp.get_local_max(armCylPressure_uri,initTime,-1)*0.00001
print 'arm Pressure : {0}'.format(armPressure)
metrics = {}
metrics.update({'bucketCylLength_unit': {'value': pp.get_data_by_time(bucketCylLength_uri, max_p_time)[0], 'unit': 'm'},
'boomCylLength_unit': {'value': pp.get_data_by_time(boomCylLength_uri, max_p_time)[0], 'unit': 'm'},
'armCylLength_unit': {'value': pp.get_data_by_time(armCylLength_uri, max_p_time)[0], 'unit': 'm'},
'bucketCylPressure': {'value': pp.global_abs_max(bucketCylPressure_uri)*0.00001, 'unit': 'bar'},
'boomCylRPressure': {'value': pp.global_abs_max(boomCylRPressure_uri)*0.00001, 'unit': 'bar'},
'armCylPressure': {'value': armPressure, 'unit': 'bar'},
'arm_angVel' : {'value': pp.global_abs_max(arm_ang_vel_uri), 'unit':'rads/s'},
'max_reach':{'value':pp.global_max(max_reach_uri),'unit':'m'},
'max_high_reach' : {'value': pp.global_max(max_Y_uri), 'unit':'m'},
'max_low_reach': {'value': pp.global_min(max_Y_uri), 'unit':'m'},
'cycle_time': {'value': dt, 'unit':'s'},
#'swing_speed': {'value': pp.last_value(swing_uri), 'unit':'rad/s'},
})
cwd = os.getcwd()
os.chdir('..')
# print 'Plot saved to : {0}'.format(pp.save_as_svg(vehicle_speed,
# pp.global_abs_max(vehicle_speed),
# 'VehicleSpeed',
# 'max(FTP_Driver.driver_bus.vehicle_speed)',
# 'kph'))
dur = 100
pp.store_data_to_csv(bucketCylLength_uri, '{0}.csv'.format(bucketCylLength_uri), 0, 0.1, dur)
pp.store_data_to_csv(armCylLength_uri, '{0}.csv'.format(armCylLength_uri), 0, 0.1, dur)
pp.store_data_to_csv(boomCylLength_uri, '{0}.csv'.format(boomCylLength_uri), 0, 0.1, dur)
pp.store_data_to_csv(boomCylRPressure_uri, '{0}.csv'.format(boomCylRPressure_uri), 0, 0.1, dur)
pp.store_data_to_csv(arm_ang_vel_uri, '{0}.csv'.format(arm_ang_vel_uri), 0, 0.1, dur)
pp.store_data_to_csv(max_Y_uri, '{0}.csv'.format(max_Y_uri), 0, 0.1, dur)
pp.store_data_to_csv(max_reach_uri, '{0}.csv'.format(max_reach_uri), 0, 0.1, dur)
pp.store_data_to_csv(State_uri, '{0}.csv'.format(State_uri), 0, 0.1, dur)
## end of postprocessing part
## Second limit part
check_limits_and_add_to_report_json(pp, limit_dict)
update_metrics_in_report_json(metrics)
## end of Second limit part
os.chdir(cwd)
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('design.tank_level')
filter.append('design.FuelTankVolume')
filter.append('design.engine_heat_port.T')
filter.append('driver_Land_Profile.driver_control.error_current.u2')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
start_fraction = pp.get_data_by_time('design.tank_level', 0.01)[0]
end_fraction = pp.last_value('design.tank_level')
tank_volume = pp.last_value('design.FuelTankVolume')
distance_covered_m = pp.integrate(
'driver_Land_Profile.driver_control.error_current.u2')
print "start_fraction : {0}".format(start_fraction)
print "end_fraction : {0}".format(end_fraction)
print "tank_volume : {0}".format(tank_volume)
print "distance_covered_m : {0}".format(distance_covered_m)
print "end_time : {0}".format(pp.time[-1])
metrics.update({
import os
from common import PostProcess, update_metrics_in_report_json, read_limits, check_limits_and_add_to_report_json
if __name__ == '__main__':
if len(sys.argv) > 1:
try:
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
limits_dict, filter = read_limits()
filter.append('SpeedSensor.v')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
# No need to convert values into string that is done in update_metrics_in_report_json
metrics.update({'Velocity' : {'value': pp.global_abs_max('SpeedSensor.v'), 'unit': 'm/s'}})
cwd = os.getcwd()
os.chdir('..')
update_metrics_in_report_json(metrics)
check_limits_and_add_to_report_json(pp, limits_dict)
os.chdir(cwd)
except Exception as err:
print err.message
if os.name == 'nt':
import win32api
if __name__ == '__main__':
if len(sys.argv) > 1:
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.vehicleSpeed')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
#pressure_variable_name = [var_name for var_name in filter if var_name.endswith('hot_fluid_out.p')][0]
metrics = {}
metrics.update({'VehicleSpeed': {'value': pp.global_abs_max("road_Wheel_Load_Both_Sides.vehicleSpeed"), 'unit': 'kph'}})
#metrics.update({'EngineAirPressure': {'value': pp.last_value(pressure_variable_name), 'unit': 'Pascal'}})
cwd = os.getcwd()
os.chdir('..')
update_metrics_in_report_json(metrics)
## end of postprocessing part
## Second limit part
check_limits_and_add_to_report_json(pp, limit_dict)
## end of Second limit part
os.chdir(cwd)
def main():
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
raise IOError("Given result file does not exist: {0}".format(sys.argv[1]))
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
bucketCylLength_uri = "Excavator_.bucketCylLength_unit"
filter.append(bucketCylLength_uri)
armCylLength_uri = "Excavator_.armCylLength_unit"
filter.append(armCylLength_uri)
boomCylLength_uri = "Excavator_.boomCylLength_unit"
filter.append(boomCylLength_uri)
boomCylRPressure_uri = "Excavator_.boomCylLPressure_a"
filter.append(boomCylRPressure_uri)
armCylPressure_uri = "Excavator_.armCylPressure_a"
filter.append(armCylPressure_uri)
bucketCylPressure_uri = "Excavator_.bucketCylPressure_a"
filter.append(bucketCylPressure_uri)
arm_ang_vel_uri = "Excavator_.arm_ang_vel"
filter.append(arm_ang_vel_uri)
max_Y_uri = "Excavator_.yDistance"
filter.append(max_Y_uri)
max_reach_uri = "Excavator_.xDistance"
filter.append(max_reach_uri)
State_uri = "operator_Full.State_1"
filter.append(State_uri)
tip_uri = "Excavator_.tipping_torque"
filter.append(tip_uri)
deflection_uri = "Excavator_.yDistance"
filter.append(deflection_uri)
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
max_p_time = pp.global_max_time(boomCylRPressure_uri)
max_v_time = pp.global_max_time(arm_ang_vel_uri)
# max_p_time = pp.global_max_time(armCylPressure_uri)
# max_p_time = pp.global_max_time(bucketCylPressure_uri)
print "Maximum pressure obtained at : {0}".format(max_p_time)
print "Max tip torque : {0}".format(pp.global_abs_max(tip_uri))
y_deflection = pp.get_data_by_index(deflection_uri, 0) - pp.last_value(deflection_uri)
metrics = {}
metrics.update(
{
"bucketCylLength_unit": {"value": pp.get_data_by_time(bucketCylLength_uri, max_p_time)[0], "unit": "m"},
"boomCylLength_unit": {"value": pp.get_data_by_time(boomCylLength_uri, max_p_time)[0], "unit": "m"},
"armCylLength_unit": {"value": pp.get_data_by_time(armCylLength_uri, max_p_time)[0], "unit": "m"},
"bucketCylPressure": {"value": pp.global_abs_max(bucketCylPressure_uri) * 0.00001, "unit": "bar"},
"boomCylRPressure": {"value": pp.global_abs_max(boomCylRPressure_uri) * 0.00001, "unit": "bar"},
"armCylPressure": {"value": pp.global_abs_max(armCylPressure_uri) * 0.00001, "unit": "bar"},
"tipTorque": {"value": pp.global_abs_max(tip_uri), "unit": "N-m"},
"y_deflection": {"value": y_deflection, "unit": "m"},
#'swing_speed': {'value': pp.last_value(swing_uri), 'unit':'rad/s'},
}
)
cwd = os.getcwd()
os.chdir("..")
# print 'Plot saved to : {0}'.format(pp.save_as_svg(vehicle_speed,
# pp.global_abs_max(vehicle_speed),
# 'VehicleSpeed',
# 'max(FTP_Driver.driver_bus.vehicle_speed)',
# 'kph'))
dur = 100
pp.store_data_to_csv(bucketCylLength_uri, "{0}.csv".format(bucketCylLength_uri), 0, 0.1, dur)
pp.store_data_to_csv(armCylLength_uri, "{0}.csv".format(armCylLength_uri), 0, 0.1, dur)
pp.store_data_to_csv(boomCylLength_uri, "{0}.csv".format(boomCylLength_uri), 0, 0.1, dur)
pp.store_data_to_csv(boomCylRPressure_uri, "{0}.csv".format(boomCylRPressure_uri), 0, 0.1, dur)
pp.store_data_to_csv(arm_ang_vel_uri, "{0}.csv".format(arm_ang_vel_uri), 0, 0.1, dur)
pp.store_data_to_csv(max_Y_uri, "{0}.csv".format(max_Y_uri), 0, 0.1, dur)
pp.store_data_to_csv(max_reach_uri, "{0}.csv".format(max_reach_uri), 0, 0.1, dur)
pp.store_data_to_csv(State_uri, "{0}.csv".format(State_uri), 0, 0.1, dur)
## end of postprocessing part
## Second limit part
check_limits_and_add_to_report_json(pp, limit_dict)
update_metrics_in_report_json(metrics)
## end of Second limit part
os.chdir(cwd)
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.vehicleSpeed')
filter.append('road_Wheel_Load_Both_Sides.Accel_20kph')
filter.append('design_v1.EngineHeatPort.T')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
metrics.update({'MaxVehicleSpeed': {'value': pp.global_abs_max("road_Wheel_Load_Both_Sides.vehicleSpeed"), 'unit': 'kph'}})
metrics.update({'Acc20kph': {'value': pp.last_value('road_Wheel_Load_Both_Sides.Accel_20kph'), 'unit': 's'}})
metrics.update({'EngineTemperature': {'value': pp.last_value('design_v1.EngineHeatPort.T') - 273.15, 'unit': 'C'}})
cwd = os.getcwd()
os.chdir('..')
update_metrics_in_report_json(metrics)
## end of postprocessing part
## Second limit part
check_limits_and_add_to_report_json(pp, limit_dict)
## end of Second limit part
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print "Given result file does not exist: {0}".format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append("road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.vehicleSpeed")
filter.append("road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.Accel_20kph")
filter.append("design_v1.EngineHeatPort.T")
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
metrics.update(
{
"MaxVehicleSpeed": {
"value": pp.global_abs_max(
"road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.vehicleSpeed"
),
"unit": "kph",
}
}
)
metrics.update(
{
"Acc20kph": {
## Post processing part
filter.append(
'road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.vehicleSpeed'
)
filter.append(
'driver_Land_Profile.ModelicaModel_Driver_Land_Profile.driver_control.error_current.y'
)
filter.append(
'driver_Land_Profile.ModelicaModel_Driver_Land_Profile.driver_control.error_current.u2'
)
#filter.append('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.Accel_40kph')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
t = pp.time
# Liters of fuel used per 100km
volume_var_name = [
var_name for var_name in filter if var_name.endswith('tank.V')
][0]
volume = pp.data_array(volume_var_name)
fuel_used = (volume[0] - volume[-1]) * 1000
distance_covered_m = pp.integrate(
'driver_Land_Profile.ModelicaModel_Driver_Land_Profile.driver_control.error_current.u2'
)
if distance_covered_m != 0:
fuel_consumption = fuel_used / (distance_covered_m * 1000 * 100)
else:
fuel_consumption = -1
#vehicle_speed_SI = pp.data_array('driver_Land_Profile.ModelicaModel_Driver_Land_Profile.driver_control.error_current.u2')
def main():
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
raise IOError('Given result file does not exist: {0}'.format(
sys.argv[1]))
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
bucketCylLength_uri = 'Excavator_.bucketCylLength_unit'
filter.append(bucketCylLength_uri)
armCylLength_uri = 'Excavator_.armCylLength_unit'
filter.append(armCylLength_uri)
boomCylLength_uri = 'Excavator_.boomCylLength_unit'
filter.append(boomCylLength_uri)
boomCylRPressure_uri = 'Excavator_.boomCylLPressure_a'
filter.append(boomCylRPressure_uri)
armCylPressure_uri = 'Excavator_.armCylPressure_a'
filter.append(armCylPressure_uri)
bucketCylPressure_uri = 'Excavator_.bucketCylPressure_a'
filter.append(bucketCylPressure_uri)
arm_ang_vel_uri = 'Excavator_.arm_ang_vel'
filter.append(arm_ang_vel_uri)
max_Y_uri = 'Excavator_.yDistance'
filter.append(max_Y_uri)
max_reach_uri = 'Excavator_.xDistance'
filter.append(max_reach_uri)
State_uri = 'operator_Full.State_1'
filter.append(State_uri)
tip_uri = 'Excavator_.tipping_torque'
filter.append(tip_uri)
deflection_uri = 'Excavator_.yDistance'
filter.append(deflection_uri)
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
max_p_time = pp.global_max_time(boomCylRPressure_uri)
max_v_time = pp.global_max_time(arm_ang_vel_uri)
#max_p_time = pp.global_max_time(armCylPressure_uri)
#max_p_time = pp.global_max_time(bucketCylPressure_uri)
print 'Maximum pressure obtained at : {0}'.format(max_p_time)
print 'Max tip torque : {0}'.format(pp.global_abs_max(tip_uri))
y_deflection = pp.get_data_by_index(deflection_uri,
0) - pp.last_value(deflection_uri)
metrics = {}
metrics.update({
'bucketCylLength_unit': {
'value': pp.get_data_by_time(bucketCylLength_uri, max_p_time)[0],
'unit': 'm'
},
'boomCylLength_unit': {
'value': pp.get_data_by_time(boomCylLength_uri, max_p_time)[0],
'unit': 'm'
},
'armCylLength_unit': {
'value': pp.get_data_by_time(armCylLength_uri, max_p_time)[0],
'unit': 'm'
},
'bucketCylPressure': {
'value': pp.global_abs_max(bucketCylPressure_uri) * 0.00001,
'unit': 'bar'
},
'boomCylRPressure': {
'value': pp.global_abs_max(boomCylRPressure_uri) * 0.00001,
'unit': 'bar'
},
'armCylPressure': {
'value': pp.global_abs_max(armCylPressure_uri) * 0.00001,
'unit': 'bar'
},
'tipTorque': {
'value': pp.global_abs_max(tip_uri),
'unit': 'N-m'
},
'y_deflection': {
'value': y_deflection,
'unit': 'm'
},
#'swing_speed': {'value': pp.last_value(swing_uri), 'unit':'rad/s'},
})
cwd = os.getcwd()
os.chdir('..')
# print 'Plot saved to : {0}'.format(pp.save_as_svg(vehicle_speed,
# pp.global_abs_max(vehicle_speed),
# 'VehicleSpeed',
# 'max(FTP_Driver.driver_bus.vehicle_speed)',
# 'kph'))
dur = 100
pp.store_data_to_csv(bucketCylLength_uri,
'{0}.csv'.format(bucketCylLength_uri), 0, 0.1, dur)
pp.store_data_to_csv(armCylLength_uri, '{0}.csv'.format(armCylLength_uri),
0, 0.1, dur)
pp.store_data_to_csv(boomCylLength_uri,
'{0}.csv'.format(boomCylLength_uri), 0, 0.1, dur)
pp.store_data_to_csv(boomCylRPressure_uri,
'{0}.csv'.format(boomCylRPressure_uri), 0, 0.1, dur)
pp.store_data_to_csv(arm_ang_vel_uri, '{0}.csv'.format(arm_ang_vel_uri), 0,
0.1, dur)
pp.store_data_to_csv(max_Y_uri, '{0}.csv'.format(max_Y_uri), 0, 0.1, dur)
pp.store_data_to_csv(max_reach_uri, '{0}.csv'.format(max_reach_uri), 0,
0.1, dur)
pp.store_data_to_csv(State_uri, '{0}.csv'.format(State_uri), 0, 0.1, dur)
## end of postprocessing part
## Second limit part
check_limits_and_add_to_report_json(pp, limit_dict)
update_metrics_in_report_json(metrics)
## end of Second limit part
os.chdir(cwd)
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.vehicleSpeed')
filter.append('road_Wheel_Load_Both_Sides.Accel_20kph')
filter.append('road_Wheel_Load_Both_Sides.Accel_40kph')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
#pressure_variable_name = [var_name for var_name in filter if var_name.endswith('hot_fluid_out.p')][0]
metrics = {}
metrics.update({'VehicleSpeed': {'value': pp.global_abs_max("road_Wheel_Load_Both_Sides.vehicleSpeed"), 'unit': 'kph'}})
metrics.update({'Acc20kph': {'value': pp.last_value('road_Wheel_Load_Both_Sides.Accel_20kph'), 'unit': 's'}})
metrics.update({'Acc40kph': {'value': pp.last_value('road_Wheel_Load_Both_Sides.Accel_40kph'), 'unit': 's'}})
#metrics.update({'EngineAirPressure': {'value': pp.last_value(pressure_variable_name), 'unit': 'Pascal'}})
cwd = os.getcwd()
os.chdir('..')
print 'Plot saved to : {0}'.format(pp.save_as_svg('road_Wheel_Load_Both_Sides.vehicleSpeed',
pp.global_abs_max("road_Wheel_Load_Both_Sides.vehicleSpeed"),
'VehicleSpeed',
'max(road_Wheel_Load_Both_Sides.vehicleSpeed)',
'km/h'))
print 'Plot saved to : {0}'.format(pp.save_as_svg('road_Wheel_Load_Both_Sides.Accel_20kph',
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.vehicleSpeed')
filter.append('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.Accel_20kph')
filter.append('design_v1.EngineHeatPort.T')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
metrics.update({'MaxVehicleSpeed': {'value': pp.global_abs_max("road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.vehicleSpeed"), 'unit': 'kph'}})
metrics.update({'Acc20kph': {'value': pp.last_value('road_Wheel_Load_Both_Sides.ModelicaModel_road_Wheel_Load_Both_Sides.Accel_20kph'), 'unit': 's'}})
metrics.update({'EngineTemperature': {'value': pp.last_value('design_v1.EngineHeatPort.T') - 273.15, 'unit': 'C'}})
update_metrics_in_report_json(metrics)
## end of postprocessing part
## Second limit part
check_limits_and_add_to_report_json(pp, limit_dict)
## end of Second limit part
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('PositionSensor.s')
filter.append('SpeedSensor.v')
filter.append('AccSensor.a')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
time_array = pp.time_array()
velocity_array = pp.data_array('SpeedSensor.v')
acceleration_array = pp.data_array('AccSensor.a')
position = pp.last_value('PositionSensor.s')
zero = pp.find_zero(velocity_array,acceleration_array,time_array)
if zero != -1:
time_to_zero = zero
stopped_moving = True
else:
time_to_zero = 10000
stopped_moving = False
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.vehicleSpeed')
filter.append('driver_Land_Profile.driver_control.error_current.y')
filter.append('driver_Land_Profile.driver_control.error_current.u2')
#filter.append('road_Wheel_Load_Both_Sides.Accel_40kph')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
t = pp.time
# Liters of fuel used per 100km
#volume_var_name = [var_name for var_name in filter if var_name.endswith('tank.V')][0]
#volume = pp.data_array(volume_var_name)
fuel_used = 1 #(volume[0] - volume[-1])*1000
distance_covered_m = pp.integrate('driver_Land_Profile.driver_control.error_current.u2')
if distance_covered_m != 0:
fuel_consumption = fuel_used/(distance_covered_m*1000*100)
else:
fuel_consumption = -1
#vehicle_speed_SI = pp.data_array('driver_Land_Profile.driver_control.error_current.u2')
# Deviation from requested speed
e = pp.data_array('driver_Land_Profile.driver_control.error_current.y')
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.vehicleSpeed')
filter.append('road_Wheel_Load_Both_Sides.Accel_20kph')
filter.append('road_Wheel_Load_Both_Sides.Accel_40kph')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
#pressure_variable_name = [var_name for var_name in filter if var_name.endswith('hot_fluid_out.p')][0]
metrics = {}
metrics.update({
'VehicleSpeed': {
'value':
pp.global_abs_max("road_Wheel_Load_Both_Sides.vehicleSpeed"),
'unit':
'kph'
}
})
metrics.update({
'Acc20kph': {
'value':
pp.last_value('road_Wheel_Load_Both_Sides.Accel_20kph'),
'unit': 's'
def main():
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
raise IOError('Given result file does not exist: {0}'.format(sys.argv[1]))
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
bucketCylLength_uri = 'Excavator_.bucketCylLength_unit'
filter.append(bucketCylLength_uri)
armCylLength_uri = 'Excavator_.armCylLength_unit'
filter.append(armCylLength_uri)
boomCylLength_uri = 'Excavator_.boomCylLength_unit'
filter.append(boomCylLength_uri)
boomCylRPressure_uri = 'Excavator_.boomCylLPressure_a'
filter.append(boomCylRPressure_uri)
armCylPressure_uri = 'Excavator_.armCylPressure_a'
filter.append(armCylPressure_uri)
bucketCylPressure_uri = 'Excavator_.bucketCylPressure_a'
filter.append(bucketCylPressure_uri)
arm_ang_vel_uri = 'Excavator_.arm_ang_vel'
filter.append(arm_ang_vel_uri)
max_Y_uri = 'Excavator_.yDistance'
filter.append(max_Y_uri)
max_reach_uri = 'Excavator_.xDistance'
filter.append(max_reach_uri)
swing_uri = 'Excavator_.carriage2.swingRevolute.w'
filter.append(swing_uri)
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
max_p_time = pp.global_max_time(boomCylRPressure_uri)
max_v_time = pp.global_max_time(arm_ang_vel_uri)
print 'Maximum pressure obtained at : {0}'.format(max_p_time)
max_p_time = pp.global_max_time(armCylPressure_uri)
print 'Maximum pressure obtained at : {0}'.format(max_p_time)
max_p_time = pp.global_max_time(bucketCylPressure_uri)
print 'Maximum pressure obtained at : {0}'.format(max_p_time)
print 'Maximum velocity obtained at : {0}'.format(max_v_time)
print 'Maximum Reach obtained at : {0}'.format(pp.global_max_time(max_reach_uri))
metrics = {}
metrics.update({'bucketCylLength_unit': {'value': pp.get_data_by_time(bucketCylLength_uri, max_p_time)[0], 'unit': 'm'},
'boomCylLength_unit': {'value': pp.get_data_by_time(boomCylLength_uri, max_p_time)[0], 'unit': 'm'},
'boomCylRPressure': {'value': pp.global_abs_max(boomCylRPressure_uri)*0.00001, 'unit': 'bar'},
'armCylLength_unit': {'value': pp.get_data_by_time(armCylLength_uri, max_p_time)[0], 'unit': 'm'},
'armCylPressure': {'value': pp.global_abs_max(armCylPressure_uri)*0.00001, 'unit': 'bar'},
'bucketCylPressure': {'value': pp.global_abs_max(bucketCylPressure_uri)*0.00001, 'unit': 'bar'},
'arm_angVel' : {'value': pp.global_abs_max(arm_ang_vel_uri), 'unit':'rads/s'},
'max_reach':{'value':pp.global_max(max_reach_uri),'unit':'m'},
'max_high_reach' : {'value': pp.global_max(max_Y_uri), 'unit':'m'},
'max_low_reach': {'value': pp.global_min(max_Y_uri), 'unit':'m'},
'swing_speed': {'value': pp.last_value(swing_uri), 'unit':'rad/s'},
})
cwd = os.getcwd()
os.chdir('..')
# print 'Plot saved to : {0}'.format(pp.save_as_svg(vehicle_speed,
# pp.global_abs_max(vehicle_speed),
# 'VehicleSpeed',
# 'max(FTP_Driver.driver_bus.vehicle_speed)',
# 'kph'))
pp.store_data_to_csv(bucketCylLength_uri, '{0}.csv'.format(bucketCylLength_uri), 0, 0.1, 200)
pp.store_data_to_csv(armCylLength_uri, '{0}.csv'.format(armCylLength_uri), 0, 0.1, 200)
pp.store_data_to_csv(boomCylLength_uri, '{0}.csv'.format(boomCylLength_uri), 0, 0.1, 200)
pp.store_data_to_csv(boomCylRPressure_uri, '{0}.csv'.format(boomCylRPressure_uri), 0, 0.1, 200)
pp.store_data_to_csv(arm_ang_vel_uri, '{0}.csv'.format(arm_ang_vel_uri), 0, 0.1, 200)
pp.store_data_to_csv(max_Y_uri, '{0}.csv'.format(max_Y_uri), 0, 0.1, 500)
pp.store_data_to_csv(max_reach_uri, '{0}.csv'.format(max_reach_uri), 0, 0.1, 200)
update_metrics_in_report_json(metrics)
## end of postprocessing part
## Second limit part
check_limits_and_add_to_report_json(pp, limit_dict)
## end of Second limit part
os.chdir(cwd)
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('PositionSensor.s')
filter.append('SpeedSensor.v')
filter.append('AccSensor.a')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
time_array = pp.time_array()
velocity_array = pp.data_array('SpeedSensor.v')
acceleration_array = pp.data_array('AccSensor.a')
position = pp.last_value('PositionSensor.s')
zero = pp.find_zero(velocity_array, acceleration_array, time_array)
if zero != -1:
time_to_zero = zero
stopped_moving = True
else:
time_to_zero = 10000
stopped_moving = False
metrics.update({'Time_to_Zero': {'value': time_to_zero, 'unit': 's'}})
if __name__ == "__main__":
if len(sys.argv) > 1:
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print "Given result file does not exist: {0}".format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append("road_Wheel_Load_Both_Sides.vehicleSpeed")
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
speed_array = pp.data_array("road_Wheel_Load_Both_Sides.vehicleSpeed")
time_array = pp.time_array()
n = len(speed_array)
acc10kph = -1
points = range(n)
for i in points:
if speed_array[i] < -10:
acc10kph = time_array[i]
break
max_rev_speed = speed_array[-1]
mat_file_name = sys.argv[1]
if not os.path.exists(mat_file_name):
print 'Given result file does not exist: {0}'.format(sys.argv[1])
os._exit(3)
## First limit part
limit_dict, filter = read_limits()
## End of first limit part
## Post processing part
filter.append('road_Wheel_Load_Both_Sides.vehicleSpeed')
filter.append('road_Wheel_Load_Both_Sides.Accel_20kph')
filter.append('design_v1.EngineHeatPort.T')
# loads results with the filtered out variables (and 'time' which is default)
pp = PostProcess(mat_file_name, filter)
metrics = {}
metrics.update({
'MaxVehicleSpeed': {
'value':
pp.global_abs_max("road_Wheel_Load_Both_Sides.vehicleSpeed"),
'unit':
'kph'
}
})
metrics.update({
'Acc20kph': {
'value':
pp.last_value('road_Wheel_Load_Both_Sides.Accel_20kph'),
'unit': 's'
