def test_decide():
"""Allow state transition decisions based on collected context other than just
the next source symbol.
"""
e = cpppo.state("enter")
e["a"] = a = cpppo.state_input("a", context="a")
a[" "] = s1 = cpppo.state_drop("s1")
s1[" "] = s1
s1[None] = i1 = cpppo.integer("i1", context="i1")
i1[" "] = s2 = cpppo.state_drop("s2")
s2[" "] = s2
s2[None] = i2 = cpppo.integer("i2", context="i2")
less = cpppo.state("less", terminal=True)
greater = cpppo.state("greater", terminal=True)
equal = cpppo.state("equal", terminal=True)
i2[None] = cpppo.decide("isless", less, predicate=lambda machine, source, path, data: data.i1 < data.i2)
i2[None] = cpppo.decide("isgreater", greater, predicate=lambda machine, source, path, data: data.i1 > data.i2)
i2[None] = equal
source = cpppo.peekable(str("a 1 2"))
data = cpppo.dotdict()
with cpppo.dfa("comparo", initial=e) as comparo:
for i, (m, s) in enumerate(comparo.run(source=source, data=data)):
log.info(
"%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r",
m.name_centered(),
i,
s,
source.sent,
source.peek(),
data,
)
assert i == 11
assert s is less
source = cpppo.peekable(str("a 33 33"))
data = cpppo.dotdict()
with cpppo.dfa("comparo", initial=e) as comparo:
for i, (m, s) in enumerate(comparo.run(source=source, data=data)):
log.info(
"%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r",
m.name_centered(),
i,
s,
source.sent,
source.peek(),
data,
)
assert i == 13
assert s is equal
def test_decide():
"""Allow state transition decisions based on collected context other than just
the next source symbol.
"""
e = cpppo.state("enter")
e['a'] = a = cpppo.state_input("a", context='a')
a[' '] = s1 = cpppo.state_drop("s1")
s1[' '] = s1
s1[None] = i1 = cpppo.integer("i1", context='i1')
i1[' '] = s2 = cpppo.state_drop("s2")
s2[' '] = s2
s2[None] = i2 = cpppo.integer("i2", context='i2')
less = cpppo.state("less", terminal=True)
greater = cpppo.state("greater", terminal=True)
equal = cpppo.state("equal", terminal=True)
i2[None] = cpppo.decide(
"isless",
less,
predicate=lambda machine, source, path, data: data.i1 < data.i2)
i2[None] = cpppo.decide(
"isgreater",
greater,
predicate=lambda machine, source, path, data: data.i1 > data.i2)
i2[None] = equal
source = cpppo.peekable(str('a 1 2'))
data = cpppo.dotdict()
with cpppo.dfa("comparo", initial=e) as comparo:
for i, (m, s) in enumerate(comparo.run(source=source, data=data)):
log.info("%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r",
m.name_centered(), i, s, source.sent, source.peek(), data)
assert i == 12
assert s is less
source = cpppo.peekable(str('a 33 33'))
data = cpppo.dotdict()
with cpppo.dfa("comparo", initial=e) as comparo:
for i, (m, s) in enumerate(comparo.run(source=source, data=data)):
log.info("%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r",
m.name_centered(), i, s, source.sent, source.peek(), data)
assert i == 14
assert s is equal
def test_decode():
# Test decode of regexes over bytes data. Operates in raw bytes symbols., works in Python 2/3.
source = cpppo.peekable('π'.encode('utf-8'))
data = cpppo.dotdict()
with cpppo.string_bytes('pi',
initial='.*',
greedy=True,
context='pi',
decode='utf-8') as machine:
for i, (m, s) in enumerate(machine.run(source=source, data=data)):
log.info("%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r",
m.name_centered(), i, s, source.sent, source.peek(), data)
assert i == 3
assert source.sent == 2
assert data.pi == 'π'
if sys.version_info[0] < 3:
# Test regexes over plain string data (no decode required). Force non-unicode (counteracts
# import unicode_literals above). We can't use greenery.lego regexes on unicode data in
# Python 2...
source = cpppo.peekable(str('pi'))
data = cpppo.dotdict()
with cpppo.string('pi', initial='.*', greedy=True,
context='pi') as machine:
for i, (m, s) in enumerate(machine.run(source=source, data=data)):
log.info("%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r",
m.name_centered(), i, s, source.sent, source.peek(),
data)
assert i == 3
assert source.sent == 2
assert data.pi == 'pi'
else:
# Test regexes over Python 3 unicode string data (no decode required). Operates in native
# unicode symbols.
source = cpppo.peekable('π')
data = cpppo.dotdict()
with cpppo.string('pi', initial='.*', greedy=True,
context='pi') as machine:
for i, (m, s) in enumerate(machine.run(source=source, data=data)):
log.info("%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r",
m.name_centered(), i, s, source.sent, source.peek(),
data)
assert i == 2
assert source.sent == 1
assert data.pi == 'π'
source = cpppo.peekable(str('123'))
data = cpppo.dotdict()
with cpppo.integer('value') as machine:
for i, (m, s) in enumerate(machine.run(source=source, data=data)):
log.info("%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r",
m.name_centered(), i, s, source.sent, source.peek(), data)
assert i == 4
assert source.sent == 3
assert data.integer == 123
source = cpppo.peekable('123'.encode('ascii'))
data = cpppo.dotdict()
with cpppo.integer_bytes('value') as machine:
for i, (m, s) in enumerate(machine.run(source=source, data=data)):
log.info("%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r",
m.name_centered(), i, s, source.sent, source.peek(), data)
assert i == 4
assert source.sent == 3
assert data.integer == 123
# Try using a integer (str) parser over bytes data. Works in Python 2, not so much in Python 3
try:
source = cpppo.peekable('123'.encode('ascii'))
data = cpppo.dotdict()
with cpppo.integer('value') as machine:
for i, (m, s) in enumerate(machine.run(source=source, data=data)):
log.info("%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r",
m.name_centered(), i, s, source.sent, source.peek(),
data)
assert i == 4
assert source.sent == 3
assert data.integer == 123
assert sys.version_info[0] < 3, \
"Should have failed in Python3; str/bytes iterator both produce str/int"
except AssertionError:
assert not sys.version_info[0] < 3, \
"Shouldn't have failed in Python2; str/bytes iterator both produce str"
def test_decode():
# Test decode of regexes over bytes data. Operates in raw bytes symbols., works in Python 2/3.
source = cpppo.peekable( 'π'.encode( 'utf-8' ))
data = cpppo.dotdict()
with cpppo.string_bytes( 'pi', initial='.*', greedy=True, context='pi', decode='utf-8' ) as machine:
for i,(m,s) in enumerate( machine.run( source=source, data=data )):
log.info( "%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r", m.name_centered(),
i, s, source.sent, source.peek(), data )
assert i == 3
assert source.sent == 2
assert data.pi == 'π'
if sys.version_info[0] < 3:
# Test regexes over plain string data (no decode required). Force non-unicode (counteracts
# import unicode_literals above). We can't use greenery.lego regexes on unicode data in
# Python 2...
source = cpppo.peekable( str( 'pi' ))
data = cpppo.dotdict()
with cpppo.string( 'pi', initial='.*', greedy=True, context='pi' ) as machine:
for i,(m,s) in enumerate( machine.run( source=source, data=data )):
log.info( "%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r", m.name_centered(),
i, s, source.sent, source.peek(), data )
assert i == 3
assert source.sent == 2
assert data.pi == 'pi'
else:
# Test regexes over Python 3 unicode string data (no decode required). Operates in native
# unicode symbols.
source = cpppo.peekable( 'π' )
data = cpppo.dotdict()
with cpppo.string( 'pi', initial='.*', greedy=True, context='pi' ) as machine:
for i,(m,s) in enumerate( machine.run( source=source, data=data )):
log.info( "%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r", m.name_centered(),
i, s, source.sent, source.peek(), data )
assert i == 2
assert source.sent == 1
assert data.pi == 'π'
source = cpppo.peekable( str( '123' ))
data = cpppo.dotdict()
with cpppo.integer( 'value' ) as machine:
for i,(m,s) in enumerate( machine.run( source=source, data=data )):
log.info( "%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r", m.name_centered(),
i, s, source.sent, source.peek(), data )
assert i == 4
assert source.sent == 3
assert data.integer == 123
source = cpppo.peekable( '123'.encode( 'ascii' ))
data = cpppo.dotdict()
with cpppo.integer_bytes( 'value' ) as machine:
for i,(m,s) in enumerate( machine.run( source=source, data=data )):
log.info( "%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r", m.name_centered(),
i, s, source.sent, source.peek(), data )
assert i == 4
assert source.sent == 3
assert data.integer == 123
# Try using a integer (str) parser over bytes data. Works in Python 2, not so much in Python 3
try:
source = cpppo.peekable( '123'.encode( 'ascii' ))
data = cpppo.dotdict()
with cpppo.integer( 'value' ) as machine:
for i,(m,s) in enumerate( machine.run( source=source, data=data )):
log.info( "%s #%3d -> %10.10s; next byte %3d: %-10.10r: %r", m.name_centered(),
i, s, source.sent, source.peek(), data )
assert i == 4
assert source.sent == 3
assert data.integer == 123
assert sys.version_info[0] < 3, \
"Should have failed in Python3; str/bytes iterator both produce str/int"
except AssertionError:
assert not sys.version_info[0] < 3, \
"Shouldn't have failed in Python2; str/bytes iterator both produce str"
