def parse(self, wrapperPacket: UartWrapperPacket): """ Callback for SystemTopics.uartNewPackage, emits a message of type SystemTopic.uartNewMessage if the received message was of the correct protocol version and unencrypted. :param wrapperPacket: :return: """ if type(wrapperPacket) is not UartWrapperPacket: raise TypeError if wrapperPacket.protocolMajor != PROTOCOL_MAJOR: _LOGGER.warning( F"Unknown protocol: {wrapperPacket.protocolMajor}.{wrapperPacket.protocolMinor}" ) return msgType = wrapperPacket.messageType if msgType == UartMessageType.UART_MESSAGE: uartMsg = UartMessagePacket() if uartMsg.parse(wrapperPacket.payload): UartEventBus.emit(SystemTopics.uartNewMessage, uartMsg) elif msgType == UartMessageType.ENCRYPTED_UART_MESSAGE: _LOGGER.info( f"Received encrypted msg: decryption is not implemented.") return else: _LOGGER.warning(F"Unknown message type: {msgType}") return
def writeHello(self): helloPacket = UartCommandHelloPacket().getPacket() uartMessage = UartMessagePacket(UartTxType.HELLO, helloPacket).getPacket() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() UartEventBus.emit(SystemTopics.uartWriteData, uartPacket)
def _switch_crownstone(self, crownstone_id: int, switch_val: int): """ :param crownstone_id: :param switch_val: 0% .. 100% or special value (SwitchValSpecial). :return: """ # create a stone switch state packet to go into the multi switch stoneSwitchPacket = StoneMultiSwitchPacket(crownstone_id, switch_val) # wrap it in a mesh multi switch packet meshMultiSwitchPacket = MeshMultiSwitchPacket([stoneSwitchPacket ]).getPacket() # wrap that in a control packet controlPacket = ControlPacket(ControlType.MULTISWITCH).loadByteArray( meshMultiSwitchPacket).getPacket() # wrap that in a uart message uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).getPacket() # finally wrap it in a uart wrapper packet uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() # send over uart UartEventBus.emit(SystemTopics.uartWriteData, uartPacket)
async def _command_via_mesh_broadcast(self, packet: bytearray): # this is only for time and noop # broadcast to all: # value: 1 corePacket = MeshBroadcastPacket(packet).getPacket() controlPacket = ControlPacket( ControlType.MESH_COMMAND).loadByteArray(corePacket).getPacket() uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).getPacket() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() resultCollector = Collector(timeout=2, topic=SystemTopics.resultPacket) # send the message to the Crownstone UartEventBus.emit(SystemTopics.uartWriteData, uartPacket) # wait for the collectors to fill commandResultData = await resultCollector.receive() if commandResultData is not None: if commandResultData.resultCode is ResultValue.BUSY: await asyncio.sleep(0.2) return await self._command_via_mesh_broadcast(packet) elif commandResultData.resultCode is not ResultValue.SUCCESS: raise CrownstoneException(commandResultData.resultCode, "Command has failed.") await asyncio.sleep(0.1)
def echo(self, string): controlPacket = ControlPacket( ControlType.UART_MESSAGE).loadString(string).getPacket() uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).getPacket() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() UartEventBus.emit(SystemTopics.uartWriteData, uartPacket)
def getRamStats(): controlPacket = ControlPacket(ControlType.GET_RAM_STATS).getPacket() uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).getPacket() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() try: result = UartWriter(uartPacket).write_with_result_sync() if result.resultCode is ResultValue.SUCCESS: return RamStatsPacket(result.payload) logging.log(logging.WARN, f"Get ram stats failed, result={result}") except CrownstoneException as e: logging.log(logging.WARN, f"Get ram stats failed: {e}") return None
def disable_microapp(self, index: int): """ Disable a running microapp in Bluenet by removing it from RAM. Return True if message is send correctly, it doesn't check if the command is set correctly in Bluenet. For now only an index of 0 can be given, since Bluenet only supports a single app to run. """ packet = MicroappHeaderPacket(index) controlPacket = ControlPacket( ControlType.MICROAPP_DISABLE).loadByteArray( packet.serialize()).serialize() uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).serialize() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).serialize() UartWriter(uartPacket).write_sync()
def validate_microapp(self, index: int): """ validate the binary of a microapp saved in Bluenet flash memory. Return True if message is send correctly, it doesn't check if the command is set correctly in Bluenet. For now only an index of 0 can be given, since Bluenet only supports a single app to run. """ packet = MicroappHeaderPacket(index) controlPacket = ControlPacket( ControlType.MICROAPP_VALIDATE).loadByteArray( packet.serialize()).serialize() uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).serialize() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).serialize() UartWriter(uartPacket).write_sync()
def uart_echo(self, payloadString): # wrap that in a control packet controlPacket = ControlPacket( ControlType.UART_MESSAGE).loadString(payloadString).getPacket() # wrap that in a uart message uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).getPacket() # finally, wrap it in an uart wrapper packet uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() # send over uart result = UartWriter(uartPacket).write_sync()
def enable_microapp(self, index: int): """ Enable microapp in Bluenet and load it in RAM. Return True if message is send correctly, it doesn't check if the command is set correctly in Bluenet. For now only an index of 0 can be given, since Bluenet only supports a single app to run. It is recommended to run the validation function before enabling the microapp to make sure a microapp is able to run. """ packet = MicroappHeaderPacket(index) controlPacket = ControlPacket( ControlType.MICROAPP_ENABLE).loadByteArray( packet.serialize()).serialize() uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).serialize() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).serialize() UartWriter(uartPacket).write_sync()
def setup() -> bool: logging.log(logging.INFO, "Perform setup") try: controlPacket = ControlPacketsGenerator.getSetupPacket( crownstoneId=crownstoneId, sphereId=sphereId, adminKey=Conversion.ascii_or_hex_string_to_16_byte_array(adminKey), memberKey=Conversion.ascii_or_hex_string_to_16_byte_array( memberKey), basicKey=Conversion.ascii_or_hex_string_to_16_byte_array(basicKey), serviceDataKey=Conversion.ascii_or_hex_string_to_16_byte_array( serviceDataKey), localizationKey=Conversion.ascii_or_hex_string_to_16_byte_array( localizationKey), meshDeviceKey=Conversion.ascii_or_hex_string_to_16_byte_array( meshDeviceKey), meshAppKey=Conversion.ascii_or_hex_string_to_16_byte_array( meshAppKey), meshNetworkKey=Conversion.ascii_or_hex_string_to_16_byte_array( meshNetworkKey), ibeaconUUID=ibeaconUUID, ibeaconMajor=ibeaconMajor, ibeaconMinor=ibeaconMinor) uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).getPacket() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() result = UartWriter(uartPacket).write_with_result_sync( [ResultValue.SUCCESS, ResultValue.WAIT_FOR_SUCCESS]) if result.resultCode is ResultValue.SUCCESS: return True if result.resultCode is ResultValue.WAIT_FOR_SUCCESS: # Actually we should wait for the next result code.. time.sleep(3.0) return True logging.log(logging.WARN, f"Setup failed, result={result}") return False except CrownstoneException as e: logging.log(logging.WARN, f"Failed to setup: {e}") return False
async def setPowerZero(self, mW: int): controlPacket = ControlStateSetPacket( StateType.POWER_ZERO).loadInt32(mW).serialize() uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).serialize() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).serialize() resultCollector = Collector(timeout=1, topic=SystemTopics.resultPacket) # send the message to the Crownstone UartEventBus.emit(SystemTopics.uartWriteData, uartPacket) # wait for the collectors to fill commandResultData = await resultCollector.receive() if commandResultData is not None: if commandResultData.resultCode is ResultValue.BUSY: await asyncio.sleep(0.2) return await self.setPowerZero(mW) elif commandResultData.resultCode is not ResultValue.SUCCESS: raise CrownstoneException(commandResultData.resultCode, "Command has failed.")
async def _write(self, controlPacket: [int], successCodes = [ResultValue.SUCCESS, ResultValue.SUCCESS_NO_CHANGE, ResultValue.WAIT_FOR_SUCCESS]) -> [int] or None: """ Returns the result payload. TODO: return result packet. TODO: use a ControlPacket as param, instead of int array. """ _LOGGER.debug(f"Write control packet {controlPacket}") uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).serialize() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).serialize() resultCollector = Collector(timeout=1, topic=SystemTopics.resultPacket) # send the message to the Crownstone UartEventBus.emit(SystemTopics.uartWriteData, uartPacket) # wait for the collectors to fill commandResultData = await resultCollector.receive() if commandResultData is not None: if commandResultData.resultCode not in successCodes: raise CrownstoneException(commandResultData.resultCode, f"Command has failed: result code is {commandResultData.resultCode}") return commandResultData.payload return None
async def _command_via_mesh_broadcast_acked( self, crownstone_uid_array: List[int], packet: bytearray) -> MeshResult: # this is only for the set_iBeacon_config_id # broadcast to all, but retry until ID's in list have acked or timeout # value: 3 corePacket = MeshBroadcastAckedPacket(crownstone_uid_array, packet).getPacket() controlPacket = ControlPacket( ControlType.MESH_COMMAND).loadByteArray(corePacket).getPacket() uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).getPacket() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() resultCollector = Collector(timeout=2, topic=SystemTopics.resultPacket) individualCollector = BatchCollector( timeout=15, topic=SystemTopics.meshResultPacket) finalCollector = Collector(timeout=15, topic=SystemTopics.meshResultFinalPacket) # send the message to the Crownstone UartEventBus.emit(SystemTopics.uartWriteData, uartPacket) # wait for the collectors to fill commandResultData = await resultCollector.receive() if commandResultData is not None: if commandResultData.resultCode is ResultValue.BUSY: await asyncio.sleep(0.2) return await self._command_via_mesh_broadcast_acked( crownstone_uid_array, packet) elif commandResultData.resultCode is not ResultValue.SUCCESS: raise CrownstoneException(commandResultData.resultCode, "Command has failed.") return await self._handleCollectors(crownstone_uid_array, individualCollector, finalCollector)
async def _set_state_via_mesh_acked(self, crownstone_id: int, packet: bytearray) -> MeshResult: # 1:1 message to N crownstones with acks (only N = 1 supported for now) # flag value: 2 corePacket = MeshSetStatePacket(crownstone_id, packet).getPacket() controlPacket = ControlPacket( ControlType.MESH_COMMAND).loadByteArray(corePacket).getPacket() uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).getPacket() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() resultCollector = Collector(timeout=2, topic=SystemTopics.resultPacket) individualCollector = BatchCollector( timeout=15, topic=SystemTopics.meshResultPacket) finalCollector = Collector(timeout=15, topic=SystemTopics.meshResultFinalPacket) # send the message to the Crownstone UartEventBus.emit(SystemTopics.uartWriteData, uartPacket) # wait for the collectors to fill commandResultData = await resultCollector.receive() if commandResultData is not None: if commandResultData.resultCode is ResultValue.BUSY: await asyncio.sleep(0.2) return await self._set_state_via_mesh_acked( crownstone_id, packet) elif commandResultData.resultCode is not ResultValue.SUCCESS: raise CrownstoneException(commandResultData.resultCode, "Command has failed.") return await self._handleCollectors([crownstone_id], individualCollector, finalCollector)
def factoryReset() -> bool: logging.log(logging.INFO, "Factory reset") try: controlPacket = ControlPacketsGenerator.getCommandFactoryResetPacket() uartMessage = UartMessagePacket(UartTxType.CONTROL, controlPacket).getPacket() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() result = UartWriter(uartPacket).write_with_result_sync( [ResultValue.SUCCESS, ResultValue.WAIT_FOR_SUCCESS]) if result.resultCode is ResultValue.SUCCESS: # This always returns SUCCESS, while we should actually wait. time.sleep(10.0) return True if result.resultCode is ResultValue.WAIT_FOR_SUCCESS: # Actually we should wait for the next result code.. time.sleep(10.0) return True logging.log(logging.WARN, f"Factory reset failed, result={result}") return False except CrownstoneException as e: logging.log(logging.WARN, f"Failed to factory reset: {e}") return False
def _send(self, opCode: UartTxType, payload: list): # send over uart uartMessage = UartMessagePacket(opCode, payload).getPacket() uartPacket = UartWrapperPacket(UartMessageType.UART_MESSAGE, uartMessage).getPacket() UartEventBus.emit(SystemTopics.uartWriteData, uartPacket)