def apply_hysteresis_threshold(image, low, high):
"""Apply hysteresis thresholding to ``image``.
This algorithm finds regions where ``image`` is greater than ``high``
OR ``image`` is greater than ``low`` *and* that region is connected to
a region greater than ``high``.
Parameters
----------
image : array, shape (M,[ N, ..., P])
Grayscale input image.
low : float, or array of same shape as ``image``
Lower threshold.
high : float, or array of same shape as ``image``
Higher threshold.
Returns
-------
thresholded : array of bool, same shape as ``image``
Array in which ``True`` indicates the locations where ``image``
was above the hysteresis threshold.
Examples
--------
>>> import cupy as cp
>>> image = cp.asarray([1, 2, 3, 2, 1, 2, 1, 3, 2])
>>> apply_hysteresis_threshold(image, 1.5, 2.5).astype(int)
array([0, 1, 1, 1, 0, 0, 0, 1, 1])
References
----------
.. [1] J. Canny. A computational approach to edge detection.
IEEE Transactions on Pattern Analysis and Machine Intelligence.
1986; vol. 8, pp.679-698.
:DOI:`10.1109/TPAMI.1986.4767851`
"""
low = cp.clip(low, a_min=None, a_max=high) # ensure low always below high
mask_low = image > low
mask_high = image > high
# Connected components of mask_low
labels_low, num_labels = ndi.label(mask_low)
# Check which connected components contain pixels from mask_high
sums = ndi.sum(mask_high, labels_low, cp.arange(num_labels + 1))
connected_to_high = sums > 0
thresholded = connected_to_high[labels_low]
return thresholded
def canny(
image,
sigma=1.0,
low_threshold=None,
high_threshold=None,
mask=None,
use_quantiles=False,
):
"""Edge filter an image using the Canny algorithm.
Parameters
-----------
image : 2D array
Grayscale input image to detect edges on; can be of any dtype.
sigma : float, optional
Standard deviation of the Gaussian filter.
low_threshold : float, optional
Lower bound for hysteresis thresholding (linking edges).
If None, low_threshold is set to 10% of dtype's max.
high_threshold : float, optional
Upper bound for hysteresis thresholding (linking edges).
If None, high_threshold is set to 20% of dtype's max.
mask : array, dtype=bool, optional
Mask to limit the application of Canny to a certain area.
use_quantiles : bool, optional
If True then treat low_threshold and high_threshold as quantiles of the
edge magnitude image, rather than absolute edge magnitude values. If True
then the thresholds must be in the range [0, 1].
Returns
-------
output : 2D array (image)
The binary edge map.
See also
--------
skimage.sobel
Notes
-----
The steps of the algorithm are as follows:
* Smooth the image using a Gaussian with ``sigma`` width.
* Apply the horizontal and vertical Sobel operators to get the gradients
within the image. The edge strength is the norm of the gradient.
* Thin potential edges to 1-pixel wide curves. First, find the normal
to the edge at each point. This is done by looking at the
signs and the relative magnitude of the X-Sobel and Y-Sobel
to sort the points into 4 categories: horizontal, vertical,
diagonal and antidiagonal. Then look in the normal and reverse
directions to see if the values in either of those directions are
greater than the point in question. Use interpolation to get a mix of
points instead of picking the one that's the closest to the normal.
* Perform a hysteresis thresholding: first label all points above the
high threshold as edges. Then recursively label any point above the
low threshold that is 8-connected to a labeled point as an edge.
References
-----------
.. [1] Canny, J., A Computational Approach To Edge Detection, IEEE Trans.
Pattern Analysis and Machine Intelligence, 8:679-714, 1986
:DOI:`10.1109/TPAMI.1986.4767851`
.. [2] William Green's Canny tutorial
https://en.wikipedia.org/wiki/Canny_edge_detector
Examples
--------
>>> import cupy as cp
>>> from cupyimg.skimage import feature
>>> # Generate noisy image of a square
>>> im = cp.zeros((256, 256))
>>> im[64:-64, 64:-64] = 1
>>> im += 0.2 * cp.random.rand(*im.shape)
>>> # First trial with the Canny filter, with the default smoothing
>>> edges1 = feature.canny(im)
>>> # Increase the smoothing for better results
>>> edges2 = feature.canny(im, sigma=3)
"""
#
# The steps involved:
#
# * Smooth using the Gaussian with sigma above.
#
# * Apply the horizontal and vertical Sobel operators to get the gradients
# within the image. The edge strength is the sum of the magnitudes
# of the gradients in each direction.
#
# * Find the normal to the edge at each point using the arctangent of the
# ratio of the Y sobel over the X sobel - pragmatically, we can
# look at the signs of X and Y and the relative magnitude of X vs Y
# to sort the points into 4 categories: horizontal, vertical,
# diagonal and antidiagonal.
#
# * Look in the normal and reverse directions to see if the values
# in either of those directions are greater than the point in question.
# Use interpolation to get a mix of points instead of picking the one
# that's the closest to the normal.
#
# * Label all points above the high threshold as edges.
# * Recursively label any point above the low threshold that is 8-connected
# to a labeled point as an edge.
#
# Regarding masks, any point touching a masked point will have a gradient
# that is "infected" by the masked point, so it's enough to erode the
# mask by one and then mask the output. We also mask out the border points
# because who knows what lies beyond the edge of the image?
#
check_nD(image, 2)
dtype_max = dtype_limits(image, clip_negative=False)[1]
if low_threshold is None:
low_threshold = 0.1
elif use_quantiles:
if not (0.0 <= low_threshold <= 1.0):
raise ValueError("Quantile thresholds must be between 0 and 1.")
else:
low_threshold = low_threshold / dtype_max
if high_threshold is None:
high_threshold = 0.2
elif use_quantiles:
if not (0.0 <= high_threshold <= 1.0):
raise ValueError("Quantile thresholds must be between 0 and 1.")
else:
high_threshold = high_threshold / dtype_max
if mask is None:
mask = cp.ones(image.shape, dtype=bool)
def fsmooth(x):
return img_as_float(gaussian(x, sigma, mode="constant"))
smoothed = smooth_with_function_and_mask(image, fsmooth, mask)
jsobel = ndi.sobel(smoothed, axis=1)
isobel = ndi.sobel(smoothed, axis=0)
abs_isobel = cp.abs(isobel)
abs_jsobel = cp.abs(jsobel)
magnitude = cp.hypot(isobel, jsobel)
#
# Make the eroded mask. Setting the border value to zero will wipe
# out the image edges for us.
#
s = generate_binary_structure(2, 2)
eroded_mask = binary_erosion(mask, s, border_value=0)
eroded_mask = eroded_mask & (magnitude > 0)
#
# --------- Find local maxima --------------
#
# Assign each point to have a normal of 0-45 degrees, 45-90 degrees,
# 90-135 degrees and 135-180 degrees.
#
local_maxima = cp.zeros(image.shape, bool)
# ----- 0 to 45 degrees ------
pts_plus = (isobel >= 0) & (jsobel >= 0) & (abs_isobel >= abs_jsobel)
pts_minus = (isobel <= 0) & (jsobel <= 0) & (abs_isobel >= abs_jsobel)
pts = pts_plus | pts_minus
pts = eroded_mask & pts
# Get the magnitudes shifted left to make a matrix of the points to the
# right of pts. Similarly, shift left and down to get the points to the
# top right of pts.
c1 = magnitude[1:, :][pts[:-1, :]]
c2 = magnitude[1:, 1:][pts[:-1, :-1]]
m = magnitude[pts]
w = abs_jsobel[pts] / abs_isobel[pts]
c_plus = c2 * w + c1 * (1 - w) <= m
c1 = magnitude[:-1, :][pts[1:, :]]
c2 = magnitude[:-1, :-1][pts[1:, 1:]]
c_minus = c2 * w + c1 * (1 - w) <= m
local_maxima[pts] = c_plus & c_minus
# ----- 45 to 90 degrees ------
# Mix diagonal and vertical
#
pts_plus = (isobel >= 0) & (jsobel >= 0) & (abs_isobel <= abs_jsobel)
pts_minus = (isobel <= 0) & (jsobel <= 0) & (abs_isobel <= abs_jsobel)
pts = pts_plus | pts_minus
pts = eroded_mask & pts
c1 = magnitude[:, 1:][pts[:, :-1]]
c2 = magnitude[1:, 1:][pts[:-1, :-1]]
m = magnitude[pts]
w = abs_isobel[pts] / abs_jsobel[pts]
c_plus = c2 * w + c1 * (1 - w) <= m
c1 = magnitude[:, :-1][pts[:, 1:]]
c2 = magnitude[:-1, :-1][pts[1:, 1:]]
c_minus = c2 * w + c1 * (1 - w) <= m
local_maxima[pts] = c_plus & c_minus
# ----- 90 to 135 degrees ------
# Mix anti-diagonal and vertical
#
pts_plus = (isobel <= 0) & (jsobel >= 0) & (abs_isobel <= abs_jsobel)
pts_minus = (isobel >= 0) & (jsobel <= 0) & (abs_isobel <= abs_jsobel)
pts = pts_plus | pts_minus
pts = eroded_mask & pts
c1a = magnitude[:, 1:][pts[:, :-1]]
c2a = magnitude[:-1, 1:][pts[1:, :-1]]
m = magnitude[pts]
w = abs_isobel[pts] / abs_jsobel[pts]
c_plus = c2a * w + c1a * (1.0 - w) <= m
c1 = magnitude[:, :-1][pts[:, 1:]]
c2 = magnitude[1:, :-1][pts[:-1, 1:]]
c_minus = c2 * w + c1 * (1.0 - w) <= m
local_maxima[pts] = c_plus & c_minus
# ----- 135 to 180 degrees ------
# Mix anti-diagonal and anti-horizontal
#
pts_plus = (isobel <= 0) & (jsobel >= 0) & (abs_isobel >= abs_jsobel)
pts_minus = (isobel >= 0) & (jsobel <= 0) & (abs_isobel >= abs_jsobel)
pts = pts_plus | pts_minus
pts = eroded_mask & pts
c1 = magnitude[:-1, :][pts[1:, :]]
c2 = magnitude[:-1, 1:][pts[1:, :-1]]
m = magnitude[pts]
w = abs_jsobel[pts] / abs_isobel[pts]
c_plus = c2 * w + c1 * (1 - w) <= m
c1 = magnitude[1:, :][pts[:-1, :]]
c2 = magnitude[1:, :-1][pts[:-1, 1:]]
c_minus = c2 * w + c1 * (1 - w) <= m
local_maxima[pts] = c_plus & c_minus
#
# ---- If use_quantiles is set then calculate the thresholds to use
#
if use_quantiles:
high_threshold = cp.percentile(magnitude, 100.0 * high_threshold)
low_threshold = cp.percentile(magnitude, 100.0 * low_threshold)
#
# ---- Create two masks at the two thresholds.
#
high_mask = local_maxima & (magnitude >= high_threshold)
low_mask = local_maxima & (magnitude >= low_threshold)
#
# Segment the low-mask, then only keep low-segments that have
# some high_mask component in them
#
labels, count = ndi.label(low_mask, structure=cp.ones((3, 3), bool))
if count == 0:
return low_mask
sums = cp.asarray(
ndi.sum(high_mask, labels, cp.arange(count, dtype=cp.int32) + 1),
)
sums = cp.atleast_1d(sums)
good_label = cp.zeros((count + 1,), bool)
good_label[1:] = sums > 0
output_mask = good_label[labels]
return output_mask
def test_sum11():
labels = cp.asarray([1, 2], cp.int8)
for type in types:
input = cp.asarray([[1, 2], [3, 4]], type)
output = ndimage.sum(input, labels=labels, index=2)
assert_almost_equal(output, 6.0)
def test_sum12():
labels = cp.asarray([[1, 2], [2, 4]], cp.int8)
for type in types:
input = cp.asarray([[1, 2], [3, 4]], type)
output = ndimage.sum(input, labels=labels, index=cp.asarray([4, 8, 2]))
assert_array_almost_equal(output, [4.0, 0.0, 5.0])
def test_sum09():
labels = cp.asarray([1, 0], bool)
for type in types:
input = cp.asarray([[1, 2], [3, 4]], type)
output = ndimage.sum(input, labels=labels)
assert_almost_equal(output, 4.0)
def test_sum10():
labels = cp.asarray([1, 0], bool)
input = cp.asarray([[1, 2], [3, 4]], bool)
output = ndimage.sum(input, labels=labels)
assert_almost_equal(output, 2.0)
def test_sum07():
labels = cp.ones([0, 4], bool)
for type in types:
input = cp.zeros([0, 4], type)
output = ndimage.sum(input, labels=labels)
assert_array_equal(output, 0.0)
def test_sum08():
labels = cp.asarray([1, 0], bool)
for type in types:
input = cp.asarray([1, 2], type)
output = ndimage.sum(input, labels=labels)
assert_array_equal(output, 1.0)
def test_sum05():
for type in types:
input = cp.asarray([[1, 2], [3, 4]], type)
output = ndimage.sum(input)
assert_almost_equal(output, 10.0)
def test_sum04():
for type in types:
input = cp.asarray([1, 2], type)
output = ndimage.sum(input)
assert_almost_equal(output, 3.0)
def test_sum03():
for type in types:
input = cp.ones([], type)
output = ndimage.sum(input)
assert_almost_equal(output, 1.0)
def test_sum02():
for type in types:
input = cp.zeros([0, 4], type)
output = ndimage.sum(input)
assert_array_equal(output, 0.0)
def test_sum01():
for type in types:
input = cp.asarray([], type)
output = ndimage.sum(input)
assert_array_equal(output, 0.0)
