def test_compose():
a1 = Range.from_string('0, 0:N, 10:20')
a2 = Range.from_string('0, 0:N, 5:10')
a_res = Range.from_string('0, 0:N, 15:20')
assert a_res == a1.compose(a2)
b1 = Range.from_string('0,0,0:M,0:N')
b2 = Range.from_string('0,0,0,0:N')
b_res = Range.from_string('0,0,0,0:N')
assert b_res == b1.compose(b2)
c1 = Range.from_string('0, 0:N, 0:M, 50:100')
c2 = Range.from_string('0, 0, 0, 20:40')
c3 = Indices.from_string('0 , 0 , 0 , 0')
c_res1 = Range.from_string('0, 0, 0, 70:90')
c_res2 = Indices.from_string('0, 0, 0, 50')
assert c_res1 == c1.compose(c2)
assert c_res2 == c1.compose(c3)
d1 = Range.from_string('i,j,0:N')
d2 = Indices.from_string('0,0,k')
d_res = Indices.from_string('i,j,k')
assert d_res == d1.compose(d2)
def test_find_contiguous_subsets():
subset_list = [
Range([(i, i, 1), (j, j, 1)]),
Range([(i, i, 1), (j + 3, j + 3, 1)]),
Range([(i, i, 1), (j + 1, j + 2, 1)]),
Range([(i - 2, i - 1, 1), (j, j + 3, 1)]),
]
result = DeduplicateAccess.find_contiguous_subsets(subset_list)
assert len(result) == 1
assert list(result)[0] == Range([(i - 2, i, 1), (j, j + 3, 1)])
def test_squeeze_unsqueeze_ranges():
a1 = Range.from_string('0:10, 0')
expected_squeezed = [1]
a2 = deepcopy(a1)
not_squeezed = a2.squeeze()
squeezed = [i for i in range(len(a1)) if i not in not_squeezed]
unsqueezed = a2.unsqueeze(squeezed)
assert (squeezed == unsqueezed)
assert (expected_squeezed == squeezed)
assert (a1 == a2)
b1 = Range.from_string('0, 0:10')
expected_squeezed = [0]
b2 = deepcopy(b1)
not_squeezed = b2.squeeze()
squeezed = [i for i in range(len(b1)) if i not in not_squeezed]
unsqueezed = b2.unsqueeze(squeezed)
assert (squeezed == unsqueezed)
assert (expected_squeezed == squeezed)
assert (b1 == b2)
c1 = Range.from_string('0:10, 0, 0')
expected_squeezed = [1, 2]
c2 = deepcopy(c1)
not_squeezed = c2.squeeze()
squeezed = [i for i in range(len(c1)) if i not in not_squeezed]
unsqueezed = c2.unsqueeze(squeezed)
assert (squeezed == unsqueezed)
assert (expected_squeezed == squeezed)
assert (c1 == c2)
d1 = Range.from_string('0, 0:10, 0')
expected_squeezed = [0, 2]
d2 = deepcopy(d1)
not_squeezed = d2.squeeze()
squeezed = [i for i in range(len(d1)) if i not in not_squeezed]
unsqueezed = d2.unsqueeze(squeezed)
assert (squeezed == unsqueezed)
assert (expected_squeezed == squeezed)
assert (d1 == d2)
e1 = Range.from_string('0, 0, 0:10')
expected_squeezed = [0, 1]
e2 = deepcopy(e1)
not_squeezed = e2.squeeze()
squeezed = [i for i in range(len(e1)) if i not in not_squeezed]
unsqueezed = e2.unsqueeze(squeezed)
assert (squeezed == unsqueezed)
assert (expected_squeezed == squeezed)
assert (e1 == e2)
def delinearize_linearize(
self, desc: data.Array, copy_shape: Tuple[symbolic.SymbolicType],
rng: subsets.Range) -> Tuple[symbolic.SymbolicType]:
"""
Converts one N-dimensional iteration space to another M-dimensional space via linearization
followed by delinearization.
"""
indices = [
symbolic.pystr_to_symbolic(f'__i{i}')
for i in range(len(copy_shape))
]
# Special case for when both dimensionalities are equal
if tuple(desc.shape) == tuple(copy_shape):
return subsets.Range([(ind, ind, 1) for ind in indices])
if rng is not None: # Deal with offsets and strides in range
indices = rng.coord_at(indices)
linear_index = sum(indices[i] * data._prod(copy_shape[i + 1:])
for i in range(len(indices)))
cur_index = [0] * len(desc.shape)
divide_by = 1
for i in reversed(range(len(desc.shape))):
cur_index[i] = (linear_index / divide_by) % desc.shape[i]
divide_by = divide_by * desc.shape[i]
return subsets.Range([(ind, ind, 1) for ind in cur_index])
def test_add():
A = np.random.rand(M, N)
sdfg = add.to_sdfg()
result = sdfg(A=A)
# Check validity of result
assert np.allclose(result, A + A)
# Check map sequence
me = next(n for n, _ in sdfg.all_nodes_recursive()
if isinstance(n, dace.nodes.MapEntry))
assert me.map.range == Range([(0, 23, 1), (0, 24, 1)])
def test_add_11dim():
A = np.random.rand(*(2 if i < 9 else 3 for i in range(11)))
sdfg = addunk.to_sdfg(A)
result = sdfg(A=A)
# Check validity of result
assert np.allclose(result, A + A)
# Check map sequence
me = next(n for n, _ in sdfg.all_nodes_recursive()
if isinstance(n, dace.nodes.MapEntry))
assert me.map.range == Range([(0, 1, 1) if i < 9 else (0, 2, 1)
for i in range(11)])
def test_find_contiguous_subsets_nonsquare():
subset_list = [
Range([(i, i, 1), (j, j, 1)]),
Range([(i, i, 1), (j + 3, j + 3, 1)]),
Range([(i, i, 1), (j + 1, j + 2, 1)]),
Range([(i + 2, i + 2, 1), (j, j, 1)]),
Range([(i + 2, i + 2, 1), (j + 3, j + 3, 1)]),
Range([(i + 2, i + 2, 1), (j + 1, j + 2, 1)]),
Range([(i + 1, i + 1, 1), (j - 1, j - 1, 1)]),
Range([(i + 1, i + 1, 1), (j, j, 1)]),
Range([(i + 1, i + 1, 1), (j + 1, j + 1, 1)]),
]
# Prioritize on first dimension
result2 = DeduplicateAccess.find_contiguous_subsets(subset_list, 0)
result2 = DeduplicateAccess.find_contiguous_subsets(result2, None)
assert len(result2) == 2
# Prioritize on second dimension
result3 = DeduplicateAccess.find_contiguous_subsets(subset_list, 1)
assert len(result3) == 3
result3 = DeduplicateAccess.find_contiguous_subsets(result3, None)
assert len(result3) == 3
def nest_state_subgraph(sdfg: SDFG,
state: SDFGState,
subgraph: SubgraphView,
name: Optional[str] = None,
full_data: bool = False) -> nodes.NestedSDFG:
""" Turns a state subgraph into a nested SDFG. Operates in-place.
:param sdfg: The SDFG containing the state subgraph.
:param state: The state containing the subgraph.
:param subgraph: Subgraph to nest.
:param name: An optional name for the nested SDFG.
:param full_data: If True, nests entire input/output data.
:return: The nested SDFG node.
:raise KeyError: Some or all nodes in the subgraph are not located in
this state, or the state does not belong to the given
SDFG.
:raise ValueError: The subgraph is contained in more than one scope.
"""
if state.parent != sdfg:
raise KeyError('State does not belong to given SDFG')
if subgraph is not state and subgraph.graph is not state:
raise KeyError('Subgraph does not belong to given state')
# Find the top-level scope
scope_tree = state.scope_tree()
scope_dict = state.scope_dict()
scope_dict_children = state.scope_children()
top_scopenode = -1 # Initialized to -1 since "None" already means top-level
for node in subgraph.nodes():
if node not in scope_dict:
raise KeyError('Node not found in state')
# If scope entry/exit, ensure entire scope is in subgraph
if isinstance(node, nodes.EntryNode):
scope_nodes = scope_dict_children[node]
if any(n not in subgraph.nodes() for n in scope_nodes):
raise ValueError('Subgraph contains partial scopes (entry)')
elif isinstance(node, nodes.ExitNode):
entry = state.entry_node(node)
scope_nodes = scope_dict_children[entry] + [entry]
if any(n not in subgraph.nodes() for n in scope_nodes):
raise ValueError('Subgraph contains partial scopes (exit)')
scope_node = scope_dict[node]
if scope_node not in subgraph.nodes():
if top_scopenode != -1 and top_scopenode != scope_node:
raise ValueError('Subgraph is contained in more than one scope')
top_scopenode = scope_node
scope = scope_tree[top_scopenode]
###
# Consolidate edges in top scope
utils.consolidate_edges(sdfg, scope)
snodes = subgraph.nodes()
# Collect inputs and outputs of the nested SDFG
inputs: List[MultiConnectorEdge] = []
outputs: List[MultiConnectorEdge] = []
for node in snodes:
for edge in state.in_edges(node):
if edge.src not in snodes:
inputs.append(edge)
for edge in state.out_edges(node):
if edge.dst not in snodes:
outputs.append(edge)
# Collect transients not used outside of subgraph (will be removed of
# top-level graph)
data_in_subgraph = set(n.data for n in subgraph.nodes() if isinstance(n, nodes.AccessNode))
# Find other occurrences in SDFG
other_nodes = set(n.data for s in sdfg.nodes() for n in s.nodes()
if isinstance(n, nodes.AccessNode) and n not in subgraph.nodes())
subgraph_transients = set()
for data in data_in_subgraph:
datadesc = sdfg.arrays[data]
if datadesc.transient and data not in other_nodes:
subgraph_transients.add(data)
# All transients of edges between code nodes are also added to nested graph
for edge in subgraph.edges():
if (isinstance(edge.src, nodes.CodeNode) and isinstance(edge.dst, nodes.CodeNode)):
subgraph_transients.add(edge.data.data)
# Collect data used in access nodes within subgraph (will be referenced in
# full upon nesting)
input_arrays = set()
output_arrays = {}
for node in subgraph.nodes():
if (isinstance(node, nodes.AccessNode) and node.data not in subgraph_transients):
if node.has_reads(state):
input_arrays.add(node.data)
if node.has_writes(state):
output_arrays[node.data] = state.in_edges(node)[0].data.wcr
# Create the nested SDFG
nsdfg = SDFG(name or 'nested_' + state.label)
# Transients are added to the nested graph as-is
for name in subgraph_transients:
nsdfg.add_datadesc(name, sdfg.arrays[name])
# Input/output data that are not source/sink nodes are added to the graph
# as non-transients
for name in (input_arrays | output_arrays.keys()):
datadesc = copy.deepcopy(sdfg.arrays[name])
datadesc.transient = False
nsdfg.add_datadesc(name, datadesc)
# Connected source/sink nodes outside subgraph become global data
# descriptors in nested SDFG
input_names = {}
output_names = {}
global_subsets: Dict[str, Tuple[str, Subset]] = {}
for edge in inputs:
if edge.data.data is None: # Skip edges with an empty memlet
continue
name = edge.data.data
if name not in global_subsets:
datadesc = copy.deepcopy(sdfg.arrays[edge.data.data])
datadesc.transient = False
if not full_data:
datadesc.shape = edge.data.subset.size()
new_name = nsdfg.add_datadesc(name, datadesc, find_new_name=True)
global_subsets[name] = (new_name, edge.data.subset)
else:
new_name, subset = global_subsets[name]
if not full_data:
new_subset = union(subset, edge.data.subset)
if new_subset is None:
new_subset = Range.from_array(sdfg.arrays[name])
global_subsets[name] = (new_name, new_subset)
nsdfg.arrays[new_name].shape = new_subset.size()
input_names[edge] = new_name
for edge in outputs:
if edge.data.data is None: # Skip edges with an empty memlet
continue
name = edge.data.data
if name not in global_subsets:
datadesc = copy.deepcopy(sdfg.arrays[edge.data.data])
datadesc.transient = False
if not full_data:
datadesc.shape = edge.data.subset.size()
new_name = nsdfg.add_datadesc(name, datadesc, find_new_name=True)
global_subsets[name] = (new_name, edge.data.subset)
else:
new_name, subset = global_subsets[name]
if not full_data:
new_subset = union(subset, edge.data.subset)
if new_subset is None:
new_subset = Range.from_array(sdfg.arrays[name])
global_subsets[name] = (new_name, new_subset)
nsdfg.arrays[new_name].shape = new_subset.size()
output_names[edge] = new_name
###################
# Add scope symbols to the nested SDFG
defined_vars = set(
symbolic.pystr_to_symbolic(s) for s in (state.symbols_defined_at(top_scopenode).keys()
| sdfg.symbols))
for v in defined_vars:
if v in sdfg.symbols:
sym = sdfg.symbols[v]
nsdfg.add_symbol(v, sym.dtype)
# Add constants to nested SDFG
for cstname, cstval in sdfg.constants.items():
nsdfg.add_constant(cstname, cstval)
# Create nested state
nstate = nsdfg.add_state()
# Add subgraph nodes and edges to nested state
nstate.add_nodes_from(subgraph.nodes())
for e in subgraph.edges():
nstate.add_edge(e.src, e.src_conn, e.dst, e.dst_conn, copy.deepcopy(e.data))
# Modify nested SDFG parents in subgraph
for node in subgraph.nodes():
if isinstance(node, nodes.NestedSDFG):
node.sdfg.parent = nstate
node.sdfg.parent_sdfg = nsdfg
node.sdfg.parent_nsdfg_node = node
# Add access nodes and edges as necessary
edges_to_offset = []
for edge, name in input_names.items():
node = nstate.add_read(name)
new_edge = copy.deepcopy(edge.data)
new_edge.data = name
edges_to_offset.append((edge, nstate.add_edge(node, None, edge.dst, edge.dst_conn, new_edge)))
for edge, name in output_names.items():
node = nstate.add_write(name)
new_edge = copy.deepcopy(edge.data)
new_edge.data = name
edges_to_offset.append((edge, nstate.add_edge(edge.src, edge.src_conn, node, None, new_edge)))
# Offset memlet paths inside nested SDFG according to subsets
for original_edge, new_edge in edges_to_offset:
for edge in nstate.memlet_tree(new_edge):
edge.data.data = new_edge.data.data
if not full_data:
edge.data.subset.offset(global_subsets[original_edge.data.data][1], True)
# Add nested SDFG node to the input state
nested_sdfg = state.add_nested_sdfg(nsdfg, None,
set(input_names.values()) | input_arrays,
set(output_names.values()) | output_arrays.keys())
# Reconnect memlets to nested SDFG
reconnected_in = set()
reconnected_out = set()
empty_input = None
empty_output = None
for edge in inputs:
if edge.data.data is None:
empty_input = edge
continue
name = input_names[edge]
if name in reconnected_in:
continue
if full_data:
data = Memlet.from_array(edge.data.data, sdfg.arrays[edge.data.data])
else:
data = copy.deepcopy(edge.data)
data.subset = global_subsets[edge.data.data][1]
state.add_edge(edge.src, edge.src_conn, nested_sdfg, name, data)
reconnected_in.add(name)
for edge in outputs:
if edge.data.data is None:
empty_output = edge
continue
name = output_names[edge]
if name in reconnected_out:
continue
if full_data:
data = Memlet.from_array(edge.data.data, sdfg.arrays[edge.data.data])
else:
data = copy.deepcopy(edge.data)
data.subset = global_subsets[edge.data.data][1]
data.wcr = edge.data.wcr
state.add_edge(nested_sdfg, name, edge.dst, edge.dst_conn, data)
reconnected_out.add(name)
# Connect access nodes to internal input/output data as necessary
entry = scope.entry
exit = scope.exit
for name in input_arrays:
node = state.add_read(name)
if entry is not None:
state.add_nedge(entry, node, Memlet())
state.add_edge(node, None, nested_sdfg, name, Memlet.from_array(name, sdfg.arrays[name]))
for name, wcr in output_arrays.items():
node = state.add_write(name)
if exit is not None:
state.add_nedge(node, exit, Memlet())
state.add_edge(nested_sdfg, name, node, None, Memlet(data=name, wcr=wcr))
# Graph was not reconnected, but needs to be
if state.in_degree(nested_sdfg) == 0 and empty_input is not None:
state.add_edge(empty_input.src, empty_input.src_conn, nested_sdfg, None, empty_input.data)
if state.out_degree(nested_sdfg) == 0 and empty_output is not None:
state.add_edge(nested_sdfg, None, empty_output.dst, empty_output.dst_conn, empty_output.data)
# Remove subgraph nodes from graph
state.remove_nodes_from(subgraph.nodes())
# Remove subgraph transients from top-level graph
for transient in subgraph_transients:
del sdfg.arrays[transient]
# Remove newly isolated nodes due to memlet consolidation
for edge in inputs:
if state.in_degree(edge.src) + state.out_degree(edge.src) == 0:
state.remove_node(edge.src)
for edge in outputs:
if state.in_degree(edge.dst) + state.out_degree(edge.dst) == 0:
state.remove_node(edge.dst)
return nested_sdfg