Beispiel #1
0
    def _dispatch(self, method, params):
        self.cookies = []

        validuser = self.APIAuthenticateClient()
        if not validuser:
            time.sleep(2)
            return "RPC Username or password incorrect or HTTP header lacks authentication at all."

        self.apiDir = _handle_request

        if method in dir(self.apiDir):
            logger.warn('Found "{}" in API'.format(method))
            try:
                statusCode, data = object.__getattribute__(
                    _handle_request, method)(self, *params)
            except Exception as e:
                logger.exception(e)
                statusCode = 500
                data = "500"
        else:
            statusCode = 404
            data = "Method not found"

        if statusCode != 200:
            data = {'error': data}

        response = {'data': data, 'status': statusCode, 'method': method}
        return json.dumps(response)
Beispiel #2
0
    def _verifyAddress(self, address):
        status, addressVersionNumber, streamNumber, ripe = decodeAddress(
            address)
        if status != 'success':
            logger.warn(
                'API Error 0007: Could not decode address %s. Status: %s.',
                address, status)

            if status == 'checksumfailed':
                raise APIError(8, 'Checksum failed for address: ' + address)
            if status == 'invalidcharacters':
                raise APIError(9, 'Invalid characters in address: ' + address)
            if status == 'versiontoohigh':
                raise APIError(
                    10,
                    'Address version number too high (or zero) in address: ' +
                    address)
            if status == 'varintmalformed':
                raise APIError(26, 'Malformed varint in address: ' + address)
            raise APIError(
                7, 'Could not decode address: ' + address + ' : ' + status)
        if addressVersionNumber < 2 or addressVersionNumber > 4:
            raise APIError(
                11,
                'The address version number currently must be 2, 3 or 4. Others aren\'t supported. Check the address.'
            )
        if streamNumber != 1:
            raise APIError(
                12,
                'The stream number must be 1. Others aren\'t supported. Check the address.'
            )

        return (status, addressVersionNumber, streamNumber, ripe)
    def APIAuthenticateClient(self):
        if 'Authorization' in self.headers:
            # handle Basic authentication
            (enctype, encstr) = self.headers.get('Authorization').split()
            (emailid, password) = encstr.decode('base64').split(':')
            if emailid == shared.config.get('bitmessagesettings', 'apiusername') and password == shared.config.get('bitmessagesettings', 'apipassword'):
                return True
            else:
                return False
        else:
            logger.warn('Authentication failed because header lacks Authentication field')
            time.sleep(2)
            return False

        return False
    def _verifyAddress(self, address):
        status, addressVersionNumber, streamNumber, ripe = decodeAddress(address)
        if status != 'success':
            logger.warn('API Error 0007: Could not decode address %s. Status: %s.', address, status)

            if status == 'checksumfailed':
                raise APIError(8, 'Checksum failed for address: ' + address)
            if status == 'invalidcharacters':
                raise APIError(9, 'Invalid characters in address: ' + address)
            if status == 'versiontoohigh':
                raise APIError(10, 'Address version number too high (or zero) in address: ' + address)
            raise APIError(7, 'Could not decode address: ' + address + ' : ' + status)
        if addressVersionNumber < 2 or addressVersionNumber > 3:
            raise APIError(11, 'The address version number currently must be 2 or 3. Others aren\'t supported. Check the address.')
        if streamNumber != 1:
            raise APIError(12, 'The stream number must be 1. Others aren\'t supported. Check the address.')

        return (status, addressVersionNumber, streamNumber, ripe)
Beispiel #5
0
    def APIAuthenticateClient(self):
        if 'Authorization' in self.headers:
            # handle Basic authentication
            (enctype, encstr) = self.headers.get('Authorization').split()
            (emailid, password) = encstr.decode('base64').split(':')
            if emailid == shared.config.get(
                    'bitmessagesettings',
                    'apiusername') and password == shared.config.get(
                        'bitmessagesettings', 'apipassword'):
                return True
            else:
                return False
        else:
            logger.warn(
                'Authentication failed because header lacks Authentication field'
            )
            time.sleep(2)
            return False

        return False
def log_warn(msg):
    logger.warn("BitcoinThread> %s" % (msg, ))
Beispiel #7
0
 def stop(self):
     with shared.printLock:
         logger.warn('Stopping Bitmessage Deamon.')
     shutdown.doCleanShutdown()
Beispiel #8
0
    def start(self):
        _fixSocket()

        daemon = BMConfigParser().safeGetBoolean(
            'bitmessagesettings', 'daemon')

        try:
            opts, args = getopt.getopt(
                sys.argv[1:], "hcdtsa",
                ["help", "curses", "daemon", "test", "apitest"])

        except getopt.GetoptError:
            self.usage()
            sys.exit(2)

        for opt, arg in opts:
            if opt in ("-h", "--help"):
                self.usage()
                sys.exit()
            elif opt in ("-d", "--daemon"):
                daemon = True
                state.enableGUI = False  # run without a UI
            elif opt in ("-c", "--curses"):
                state.curses = True
            elif opt in ("-t", "--test"):
                state.testmode = daemon = True
                state.enableGUI = False  # run without a UI
            elif opt in ("-a", "--apitest"):
                from bmsxmlrpc.server import TestAPIThread
                server = TestAPIThread()
                server.start()

        # is the application already running?  If yes then exit.
        if state.enableGUI and not state.curses and not depends.check_pyqt():
            sys.exit(
                'PyBitmessage requires PyQt unless you want'
                ' to run it as a daemon and interact with it'
                ' using the API. You can download PyQt from '
                'http://www.riverbankcomputing.com/software/pyqt/download'
                ' or by searching Google for \'PyQt Download\'.'
                ' If you want to run in daemon mode, see '
                'https://bitmessage.org/wiki/Daemon\n'
                'You can also run PyBitmessage with'
                ' the new curses interface by providing'
                ' \'-c\' as a commandline argument.'
            )
        shared.thisapp = singleinstance("", daemon)

        if daemon and not state.testmode:
            with shared.printLock:
                logger.warn('Running as a daemon. Send TERM signal to end.')
            self.daemonize()

        self.setSignalHandler()

        helper_threading.set_thread_name("PyBitmessage")

        state.dandelion = BMConfigParser().safeGetInt('network', 'dandelion')
        # dandelion requires outbound connections, without them,
        # stem objects will get stuck forever
        if state.dandelion and not BMConfigParser().safeGetBoolean(
                'bitmessagesettings', 'sendoutgoingconnections'):
            state.dandelion = 0

        knownnodes.readKnownNodes()

        # Not needed if objproc is disabled
        if state.enableObjProc:

            # Start the address generation thread
            addressGeneratorThread = addressGenerator()
            # close the main program even if there are threads left
            addressGeneratorThread.daemon = True
            addressGeneratorThread.start()

            # Start the thread that calculates POWs
            singleWorkerThread = singleWorker()
            # close the main program even if there are threads left
            singleWorkerThread.daemon = True
            singleWorkerThread.start()

        # Start the SQL thread
        sqlLookup = sqlThread()
        # DON'T close the main program even if there are threads left.
        # The closeEvent should command this thread to exit gracefully.
        sqlLookup.daemon = False
        sqlLookup.start()

        Inventory()  # init
        # init, needs to be early because other thread may access it early
        Dandelion()

        # Enable object processor and SMTP only if objproc enabled
        if state.enableObjProc:

            # SMTP delivery thread
            if daemon and BMConfigParser().safeGet(
                    "bitmessagesettings", "smtpdeliver", '') != '':
                from class_smtpDeliver import smtpDeliver
                smtpDeliveryThread = smtpDeliver()
                smtpDeliveryThread.start()

            # SMTP daemon thread
            if daemon and BMConfigParser().safeGetBoolean(
                    "bitmessagesettings", "smtpd"):
                from class_smtpServer import smtpServer
                smtpServerThread = smtpServer()
                smtpServerThread.start()

            # Start the thread that calculates POWs
            objectProcessorThread = objectProcessor()
            # DON'T close the main program even the thread remains.
            # This thread checks the shutdown variable after processing
            # each object.
            objectProcessorThread.daemon = False
            objectProcessorThread.start()

        # Start the cleanerThread
        singleCleanerThread = singleCleaner()
        # close the main program even if there are threads left
        singleCleanerThread.daemon = True
        singleCleanerThread.start()

        # Not needed if objproc disabled
        if state.enableObjProc:
            shared.reloadMyAddressHashes()
            shared.reloadBroadcastSendersForWhichImWatching()

            # API is also objproc dependent
            if BMConfigParser().safeGetBoolean(
                    'bitmessagesettings', 'apienabled'):
                try:
                    apiNotifyPath = BMConfigParser().get(
                        'bitmessagesettings', 'apinotifypath')
                except:
                    apiNotifyPath = ''
                if apiNotifyPath != '':
                    with shared.printLock:
                        print('Trying to call', apiNotifyPath)

                    call([apiNotifyPath, "startingUp"])
                from bmsxmlrpc.server import singleAPI
                singleAPIThread = singleAPI()
                # close the main program even if there are threads left
                singleAPIThread.daemon = True
                singleAPIThread.start()

        # start network components if networking is enabled
        if state.enableNetwork:
            BMConnectionPool()
            asyncoreThread = BMNetworkThread()
            asyncoreThread.daemon = True
            asyncoreThread.start()
            for i in range(BMConfigParser().getint("threads", "receive")):
                receiveQueueThread = ReceiveQueueThread(i)
                receiveQueueThread.daemon = True
                receiveQueueThread.start()
            announceThread = AnnounceThread()
            announceThread.daemon = True
            announceThread.start()
            state.invThread = InvThread()
            state.invThread.daemon = True
            state.invThread.start()
            state.addrThread = AddrThread()
            state.addrThread.daemon = True
            state.addrThread.start()
            state.downloadThread = DownloadThread()
            state.downloadThread.daemon = True
            state.downloadThread.start()

            connectToStream(1)

            if BMConfigParser().safeGetBoolean(
                    'bitmessagesettings', 'upnp'):
                import upnp
                upnpThread = upnp.uPnPThread()
                upnpThread.start()
        else:
            # Populate with hardcoded value (same as connectToStream above)
            state.streamsInWhichIAmParticipating.append(1)

        if not daemon and state.enableGUI:
            if state.curses:
                if not depends.check_curses():
                    sys.exit()
                logger.info('Running with curses')
                import bitmessagecurses
                bitmessagecurses.runwrapper()
            elif state.kivy:
                BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
                from bitmessagekivy.mpybit import NavigateApp
                NavigateApp().run()
            else:
                import bitmessageqt
                bitmessageqt.run()
        else:
            BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')

        if daemon:
            if state.testmode:
                sleep(30)
                # make testing
                self.stop()
            while state.shutdown == 0:
                sleep(1)
Beispiel #9
0
def log_warn(msg):
    logger.warn("VotingData> %s" % (msg, ))
    def _handle_request(self, method, params):
        if method == 'helloWorld':
            (a, b) = params
            return a + '-' + b
        elif method == 'add':
            (a, b) = params
            return a + b
        elif method == 'statusBar':
            message, = params
            shared.UISignalQueue.put(('updateStatusBar', message))
        elif method == 'listAddresses':
            data = '{"addresses":['
            configSections = shared.config.sections()
            for addressInKeysFile in configSections:
                if addressInKeysFile != 'bitmessagesettings':
                    status, addressVersionNumber, streamNumber, hash = decodeAddress(
                        addressInKeysFile)
                    data
                    if len(data) > 20:
                        data += ','
                    data += json.dumps({'label': shared.config.get(addressInKeysFile, 'label'), 'address': addressInKeysFile, 'stream':
                                       streamNumber, 'enabled': shared.config.getboolean(addressInKeysFile, 'enabled')}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'listAddressBook' or method == 'listAddressbook':
            queryreturn = sqlQuery('''SELECT label, address from addressbook''')
            data = '{"addresses":['
            for row in queryreturn:
                label, address = row
                label = shared.fixPotentiallyInvalidUTF8Data(label)
                if len(data) > 20:
                    data += ','
                data += json.dumps({'label':label.encode('base64'), 'address': address}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'createRandomAddress':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            elif len(params) == 1:
                label, = params
                eighteenByteRipe = False
                nonceTrialsPerByte = shared.config.get(
                    'bitmessagesettings', 'defaultnoncetrialsperbyte')
                payloadLengthExtraBytes = shared.config.get(
                    'bitmessagesettings', 'defaultpayloadlengthextrabytes')
            elif len(params) == 2:
                label, eighteenByteRipe = params
                nonceTrialsPerByte = shared.config.get(
                    'bitmessagesettings', 'defaultnoncetrialsperbyte')
                payloadLengthExtraBytes = shared.config.get(
                    'bitmessagesettings', 'defaultpayloadlengthextrabytes')
            elif len(params) == 3:
                label, eighteenByteRipe, totalDifficulty = params
                nonceTrialsPerByte = int(
                    shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
                payloadLengthExtraBytes = shared.config.get(
                    'bitmessagesettings', 'defaultpayloadlengthextrabytes')
            elif len(params) == 4:
                label, eighteenByteRipe, totalDifficulty, smallMessageDifficulty = params
                nonceTrialsPerByte = int(
                    shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
                payloadLengthExtraBytes = int(
                    shared.networkDefaultPayloadLengthExtraBytes * smallMessageDifficulty)
            else:
                raise APIError(0, 'Too many parameters!')
            label = self._decode(label, "base64")
            try:
                unicode(label, 'utf-8')
            except:
                raise APIError(17, 'Label is not valid UTF-8 data.')
            shared.apiAddressGeneratorReturnQueue.queue.clear()
            streamNumberForAddress = 1
            shared.addressGeneratorQueue.put((
                'createRandomAddress', 3, streamNumberForAddress, label, 1, "", eighteenByteRipe, nonceTrialsPerByte, payloadLengthExtraBytes))
            return shared.apiAddressGeneratorReturnQueue.get()
        elif method == 'createDeterministicAddresses':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            elif len(params) == 1:
                passphrase, = params
                numberOfAddresses = 1
                addressVersionNumber = 0
                streamNumber = 0
                eighteenByteRipe = False
                nonceTrialsPerByte = shared.config.get(
                    'bitmessagesettings', 'defaultnoncetrialsperbyte')
                payloadLengthExtraBytes = shared.config.get(
                    'bitmessagesettings', 'defaultpayloadlengthextrabytes')
            elif len(params) == 2:
                passphrase, numberOfAddresses = params
                addressVersionNumber = 0
                streamNumber = 0
                eighteenByteRipe = False
                nonceTrialsPerByte = shared.config.get(
                    'bitmessagesettings', 'defaultnoncetrialsperbyte')
                payloadLengthExtraBytes = shared.config.get(
                    'bitmessagesettings', 'defaultpayloadlengthextrabytes')
            elif len(params) == 3:
                passphrase, numberOfAddresses, addressVersionNumber = params
                streamNumber = 0
                eighteenByteRipe = False
                nonceTrialsPerByte = shared.config.get(
                    'bitmessagesettings', 'defaultnoncetrialsperbyte')
                payloadLengthExtraBytes = shared.config.get(
                    'bitmessagesettings', 'defaultpayloadlengthextrabytes')
            elif len(params) == 4:
                passphrase, numberOfAddresses, addressVersionNumber, streamNumber = params
                eighteenByteRipe = False
                nonceTrialsPerByte = shared.config.get(
                    'bitmessagesettings', 'defaultnoncetrialsperbyte')
                payloadLengthExtraBytes = shared.config.get(
                    'bitmessagesettings', 'defaultpayloadlengthextrabytes')
            elif len(params) == 5:
                passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe = params
                nonceTrialsPerByte = shared.config.get(
                    'bitmessagesettings', 'defaultnoncetrialsperbyte')
                payloadLengthExtraBytes = shared.config.get(
                    'bitmessagesettings', 'defaultpayloadlengthextrabytes')
            elif len(params) == 6:
                passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe, totalDifficulty = params
                nonceTrialsPerByte = int(
                    shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
                payloadLengthExtraBytes = shared.config.get(
                    'bitmessagesettings', 'defaultpayloadlengthextrabytes')
            elif len(params) == 7:
                passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe, totalDifficulty, smallMessageDifficulty = params
                nonceTrialsPerByte = int(
                    shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
                payloadLengthExtraBytes = int(
                    shared.networkDefaultPayloadLengthExtraBytes * smallMessageDifficulty)
            else:
                raise APIError(0, 'Too many parameters!')
            if len(passphrase) == 0:
                raise APIError(1, 'The specified passphrase is blank.')
            if not isinstance(eighteenByteRipe, bool):
                raise APIError(23, 'Bool expected in eighteenByteRipe, saw %s instead' % type(eighteenByteRipe))
            passphrase = self._decode(passphrase, "base64")
            if addressVersionNumber == 0:  # 0 means "just use the proper addressVersionNumber"
                addressVersionNumber = 3
            if addressVersionNumber != 3:
                raise APIError(2,'The address version number currently must be 3 (or 0 which means auto-select). ' + addressVersionNumber + ' isn\'t supported.')
            if streamNumber == 0:  # 0 means "just use the most available stream"
                streamNumber = 1
            if streamNumber != 1:
                raise APIError(3,'The stream number must be 1 (or 0 which means auto-select). Others aren\'t supported.')
            if numberOfAddresses == 0:
                raise APIError(4, 'Why would you ask me to generate 0 addresses for you?')
            if numberOfAddresses > 999:
                raise APIError(5, 'You have (accidentally?) specified too many addresses to make. Maximum 999. This check only exists to prevent mischief; if you really want to create more addresses than this, contact the Bitmessage developers and we can modify the check or you can do it yourself by searching the source code for this message.')
            shared.apiAddressGeneratorReturnQueue.queue.clear()
            logger.debug('Requesting that the addressGenerator create %s addresses.', numberOfAddresses)
            shared.addressGeneratorQueue.put(
                ('createDeterministicAddresses', addressVersionNumber, streamNumber,
                 'unused API address', numberOfAddresses, passphrase, eighteenByteRipe, nonceTrialsPerByte, payloadLengthExtraBytes))
            data = '{"addresses":['
            queueReturn = shared.apiAddressGeneratorReturnQueue.get()
            for item in queueReturn:
                if len(data) > 20:
                    data += ','
                data += "\"" + item + "\""
            data += ']}'
            return data
        elif method == 'getDeterministicAddress':
            if len(params) != 3:
                raise APIError(0, 'I need exactly 3 parameters.')
            passphrase, addressVersionNumber, streamNumber = params
            numberOfAddresses = 1
            eighteenByteRipe = False
            if len(passphrase) == 0:
                raise APIError(1, 'The specified passphrase is blank.')
            passphrase = self._decode(passphrase, "base64")
            if addressVersionNumber != 3:
                raise APIError(2, 'The address version number currently must be 3. ' + addressVersionNumber + ' isn\'t supported.')
            if streamNumber != 1:
                raise APIError(3, ' The stream number must be 1. Others aren\'t supported.')
            shared.apiAddressGeneratorReturnQueue.queue.clear()
            logger.debug('Requesting that the addressGenerator create %s addresses.', numberOfAddresses)
            shared.addressGeneratorQueue.put(
                ('getDeterministicAddress', addressVersionNumber,
                 streamNumber, 'unused API address', numberOfAddresses, passphrase, eighteenByteRipe))
            return shared.apiAddressGeneratorReturnQueue.get()
        elif method == 'getAllInboxMessages':
            queryreturn = sqlQuery(
                '''SELECT msgid, toaddress, fromaddress, subject, received, message, encodingtype, read FROM inbox where folder='inbox' ORDER BY received''')
            data = '{"inboxMessages":['
            for row in queryreturn:
                msgid, toAddress, fromAddress, subject, received, message, encodingtype, read = row
                subject = shared.fixPotentiallyInvalidUTF8Data(subject)
                message = shared.fixPotentiallyInvalidUTF8Data(message)
                if len(data) > 25:
                    data += ','
                data += json.dumps({'msgid': msgid.encode('hex'), 'toAddress': toAddress, 'fromAddress': fromAddress, 'subject': subject.encode(
                    'base64'), 'message': message.encode('base64'), 'encodingType': encodingtype, 'receivedTime': received, 'read': read}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'getAllInboxMessageIds' or method == 'getAllInboxMessageIDs':
            queryreturn = sqlQuery(
                '''SELECT msgid FROM inbox where folder='inbox' ORDER BY received''')
            data = '{"inboxMessageIds":['
            for row in queryreturn:
                msgid = row[0]
                if len(data) > 25:
                    data += ','
                data += json.dumps({'msgid': msgid.encode('hex')}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'getInboxMessageById' or method == 'getInboxMessageByID':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            elif len(params) == 1:
                msgid = self._decode(params[0], "hex")
            elif len(params) >= 2:
                msgid = self._decode(params[0], "hex")
                readStatus = params[1]
                if not isinstance(readStatus, bool):
                    raise APIError(23, 'Bool expected in readStatus, saw %s instead.' % type(readStatus))
                sqlExecute('''UPDATE inbox set read = ? WHERE msgid=?''', readStatus, msgid)
            queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, received, message, encodingtype, read FROM inbox WHERE msgid=?''', msgid)
            data = '{"inboxMessage":['
            for row in queryreturn:
                msgid, toAddress, fromAddress, subject, received, message, encodingtype, read = row
                subject = shared.fixPotentiallyInvalidUTF8Data(subject)
                message = shared.fixPotentiallyInvalidUTF8Data(message)
                data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'receivedTime':received, 'read': read}, indent=4, separators=(',', ': '))
                data += ']}'
                return data
        elif method == 'getAllSentMessages':
            queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent where folder='sent' ORDER BY lastactiontime''')
            data = '{"sentMessages":['
            for row in queryreturn:
                msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
                subject = shared.fixPotentiallyInvalidUTF8Data(subject)
                message = shared.fixPotentiallyInvalidUTF8Data(message)
                if len(data) > 25:
                    data += ','
                data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'getAllSentMessageIds' or method == 'getAllSentMessageIDs':
            queryreturn = sqlQuery('''SELECT msgid FROM sent where folder='sent' ORDER BY lastactiontime''')
            data = '{"sentMessageIds":['
            for row in queryreturn:
                msgid = row[0]
                if len(data) > 25:
                    data += ','
                data += json.dumps({'msgid':msgid.encode('hex')}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'getInboxMessagesByReceiver' or method == 'getInboxMessagesByAddress': #after some time getInboxMessagesByAddress should be removed
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            toAddress = params[0]
            queryReturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, received, message, encodingtype FROM inbox WHERE folder='inbox' AND toAddress=?''', toAddress)
            data = '{"inboxMessages":['
            for row in queryreturn:
                msgid, toAddress, fromAddress, subject, received, message, encodingtype = row
                subject = shared.fixPotentiallyInvalidUTF8Data(subject)
                message = shared.fixPotentiallyInvalidUTF8Data(message)
                if len(data) > 25:
                    data += ','
                data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'receivedTime':received}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'getSentMessageById' or method == 'getSentMessageByID':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            msgid = self._decode(params[0], "hex")
            queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent WHERE msgid=?''', msgid)
            data = '{"sentMessage":['
            for row in queryreturn:
                msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
                subject = shared.fixPotentiallyInvalidUTF8Data(subject)
                message = shared.fixPotentiallyInvalidUTF8Data(message)
                data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
                data += ']}'
                return data
        elif method == 'getSentMessagesByAddress' or method == 'getSentMessagesBySender':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            fromAddress = params[0]
            queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent WHERE folder='sent' AND fromAddress=? ORDER BY lastactiontime''',
                                   fromAddress)
            data = '{"sentMessages":['
            for row in queryreturn:
                msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
                subject = shared.fixPotentiallyInvalidUTF8Data(subject)
                message = shared.fixPotentiallyInvalidUTF8Data(message)
                if len(data) > 25:
                    data += ','
                data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'getSentMessageByAckData':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            ackData = self._decode(params[0], "hex")
            queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent WHERE ackdata=?''',
                                   ackData)
            data = '{"sentMessage":['
            for row in queryreturn:
                msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
                subject = shared.fixPotentiallyInvalidUTF8Data(subject)
                message = shared.fixPotentiallyInvalidUTF8Data(message)
                data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'trashMessage':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            msgid = self._decode(params[0], "hex")
            
            # Trash if in inbox table
            helper_inbox.trash(msgid)
            # Trash if in sent table
            sqlExecute('''UPDATE sent SET folder='trash' WHERE msgid=?''', msgid)
            return 'Trashed message (assuming message existed).'
        elif method == 'trashInboxMessage':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            msgid = self._decode(params[0], "hex")
            helper_inbox.trash(msgid)
            return 'Trashed inbox message (assuming message existed).'
        elif method == 'trashSentMessage':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            msgid = self._decode(params[0], "hex")
            sqlExecute('''UPDATE sent SET folder='trash' WHERE msgid=?''', msgid)
            return 'Trashed sent message (assuming message existed).'
        elif method == 'trashSentMessageByAckData':
            # This API method should only be used when msgid is not available
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            ackdata = self._decode(params[0], "hex")
            sqlExecute('''UPDATE sent SET folder='trash' WHERE ackdata=?''',
                       ackdata)
            return 'Trashed sent message (assuming message existed).'
        elif method == 'sendMessage':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            elif len(params) == 4:
                toAddress, fromAddress, subject, message = params
                encodingType = 2
            elif len(params) == 5:
                toAddress, fromAddress, subject, message, encodingType = params
            if encodingType != 2:
                raise APIError(6, 'The encoding type must be 2 because that is the only one this program currently supports.')
            subject = self._decode(subject, "base64")
            message = self._decode(message, "base64")
            status, addressVersionNumber, streamNumber, toRipe = decodeAddress(
                toAddress)
            if status != 'success':
                logger.warn('API Error 0007: Could not decode address %s. Status: %s.', toAddress, status)

                if status == 'checksumfailed':
                    raise APIError(8, 'Checksum failed for address: ' + toAddress)
                if status == 'invalidcharacters':
                    raise APIError(9, 'Invalid characters in address: ' + toAddress)
                if status == 'versiontoohigh':
                    raise APIError(10, 'Address version number too high (or zero) in address: ' + toAddress)
                raise APIError(7, 'Could not decode address: ' + toAddress + ' : ' + status)
            if addressVersionNumber < 2 or addressVersionNumber > 3:
                raise APIError(11, 'The address version number currently must be 2 or 3. Others aren\'t supported. Check the toAddress.')
            if streamNumber != 1:
                raise APIError(12, 'The stream number must be 1. Others aren\'t supported. Check the toAddress.')
            status, addressVersionNumber, streamNumber, fromRipe = decodeAddress(
                fromAddress)
            if status != 'success':
                logger.warn('API Error 0007: Could not decode address %s. Status: %s.', fromAddress, status)

                if status == 'checksumfailed':
                    raise APIError(8, 'Checksum failed for address: ' + fromAddress)
                if status == 'invalidcharacters':
                    raise APIError(9, 'Invalid characters in address: ' + fromAddress)
                if status == 'versiontoohigh':
                    raise APIError(10, 'Address version number too high (or zero) in address: ' + fromAddress)
                raise APIError(7, 'Could not decode address: ' + fromAddress + ' : ' + status)
            if addressVersionNumber < 2 or addressVersionNumber > 3:
                raise APIError(11, 'The address version number currently must be 2 or 3. Others aren\'t supported. Check the fromAddress.')
            if streamNumber != 1:
                raise APIError(12, 'The stream number must be 1. Others aren\'t supported. Check the fromAddress.')
            toAddress = addBMIfNotPresent(toAddress)
            fromAddress = addBMIfNotPresent(fromAddress)
            try:
                fromAddressEnabled = shared.config.getboolean(
                    fromAddress, 'enabled')
            except:
                raise APIError(13, 'Could not find your fromAddress in the keys.dat file.')
            if not fromAddressEnabled:
                raise APIError(14, 'Your fromAddress is disabled. Cannot send.')

            ackdata = OpenSSL.rand(32)

            t = ('', toAddress, toRipe, fromAddress, subject, message, ackdata, int(
                time.time()), 'msgqueued', 1, 1, 'sent', 2)
            helper_sent.insert(t)

            toLabel = ''
            queryreturn = sqlQuery('''select label from addressbook where address=?''', toAddress)
            if queryreturn != []:
                for row in queryreturn:
                    toLabel, = row
            # apiSignalQueue.put(('displayNewSentMessage',(toAddress,toLabel,fromAddress,subject,message,ackdata)))
            shared.UISignalQueue.put(('displayNewSentMessage', (
                toAddress, toLabel, fromAddress, subject, message, ackdata)))

            shared.workerQueue.put(('sendmessage', toAddress))

            return ackdata.encode('hex')

        elif method == 'sendBroadcast':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            if len(params) == 3:
                fromAddress, subject, message = params
                encodingType = 2
            elif len(params) == 4:
                fromAddress, subject, message, encodingType = params
            if encodingType != 2:
                raise APIError(6, 'The encoding type must be 2 because that is the only one this program currently supports.')
            subject = self._decode(subject, "base64")
            message = self._decode(message, "base64")

            status, addressVersionNumber, streamNumber, fromRipe = decodeAddress(
                fromAddress)
            if status != 'success':
                logger.warn('API Error 0007: Could not decode address %s. Status: %s.', fromAddress, status)

                if status == 'checksumfailed':
                    raise APIError(8, 'Checksum failed for address: ' + fromAddress)
                if status == 'invalidcharacters':
                    raise APIError(9, 'Invalid characters in address: ' + fromAddress)
                if status == 'versiontoohigh':
                    raise APIError(10, 'Address version number too high (or zero) in address: ' + fromAddress)
                raise APIError(7, 'Could not decode address: ' + fromAddress + ' : ' + status)
            if addressVersionNumber < 2 or addressVersionNumber > 3:
                raise APIError(11, 'the address version number currently must be 2 or 3. Others aren\'t supported. Check the fromAddress.')
            if streamNumber != 1:
                raise APIError(12, 'the stream number must be 1. Others aren\'t supported. Check the fromAddress.')
            fromAddress = addBMIfNotPresent(fromAddress)
            try:
                fromAddressEnabled = shared.config.getboolean(
                    fromAddress, 'enabled')
            except:
                raise APIError(13, 'could not find your fromAddress in the keys.dat file.')
            ackdata = OpenSSL.rand(32)
            toAddress = '[Broadcast subscribers]'
            ripe = ''


            t = ('', toAddress, ripe, fromAddress, subject, message, ackdata, int(
                time.time()), 'broadcastqueued', 1, 1, 'sent', 2)
            helper_sent.insert(t)

            toLabel = '[Broadcast subscribers]'
            shared.UISignalQueue.put(('displayNewSentMessage', (
                toAddress, toLabel, fromAddress, subject, message, ackdata)))
            shared.workerQueue.put(('sendbroadcast', ''))

            return ackdata.encode('hex')
        elif method == 'getStatus':
            if len(params) != 1:
                raise APIError(0, 'I need one parameter!')
            ackdata, = params
            if len(ackdata) != 64:
                raise APIError(15, 'The length of ackData should be 32 bytes (encoded in hex thus 64 characters).')
            ackdata = self._decode(ackdata, "hex")
            queryreturn = sqlQuery(
                '''SELECT status FROM sent where ackdata=?''',
                ackdata)
            if queryreturn == []:
                return 'notfound'
            for row in queryreturn:
                status, = row
                return status
        elif method == 'addSubscription':
            if len(params) == 0:
                raise APIError(0, 'I need parameters!')
            if len(params) == 1:
                address, = params
                label == ''
            if len(params) == 2:
                address, label = params
                label = self._decode(label, "base64")
                try:
                    unicode(label, 'utf-8')
                except:
                    raise APIError(17, 'Label is not valid UTF-8 data.')
            if len(params) > 2:
                raise APIError(0, 'I need either 1 or 2 parameters!')
            address = addBMIfNotPresent(address)
            status, addressVersionNumber, streamNumber, toRipe = decodeAddress(
                address)
            if status != 'success':
                logger.warn('API Error 0007: Could not decode address %s. Status: %s.', address, status)

                if status == 'checksumfailed':
                    raise APIError(8, 'Checksum failed for address: ' + address)
                if status == 'invalidcharacters':
                    raise APIError(9, 'Invalid characters in address: ' + address)
                if status == 'versiontoohigh':
                    raise APIError(10, 'Address version number too high (or zero) in address: ' + address)
                raise APIError(7, 'Could not decode address: ' + address + ' : ' + status)
            if addressVersionNumber < 2 or addressVersionNumber > 3:
                raise APIError(11, 'The address version number currently must be 2 or 3. Others aren\'t supported.')
            if streamNumber != 1:
                raise APIError(12, 'The stream number must be 1. Others aren\'t supported.')
            # First we must check to see if the address is already in the
            # subscriptions list.
            queryreturn = sqlQuery('''select * from subscriptions where address=?''', address)
            if queryreturn != []:
                raise APIError(16, 'You are already subscribed to that address.')
            sqlExecute('''INSERT INTO subscriptions VALUES (?,?,?)''',label, address, True)
            shared.reloadBroadcastSendersForWhichImWatching()
            shared.UISignalQueue.put(('rerenderInboxFromLabels', ''))
            shared.UISignalQueue.put(('rerenderSubscriptions', ''))
            return 'Added subscription.'

        elif method == 'deleteSubscription':
            if len(params) != 1:
                raise APIError(0, 'I need 1 parameter!')
            address, = params
            address = addBMIfNotPresent(address)
            sqlExecute('''DELETE FROM subscriptions WHERE address=?''', address)
            shared.reloadBroadcastSendersForWhichImWatching()
            shared.UISignalQueue.put(('rerenderInboxFromLabels', ''))
            shared.UISignalQueue.put(('rerenderSubscriptions', ''))
            return 'Deleted subscription if it existed.'
        elif method == 'listSubscriptions':
            queryreturn = sqlQuery('''SELECT label, address, enabled FROM subscriptions''')
            data = '{"subscriptions":['
            for row in queryreturn:
                label, address, enabled = row
                label = shared.fixPotentiallyInvalidUTF8Data(label)
                if len(data) > 20:
                    data += ','
                data += json.dumps({'label':label.encode('base64'), 'address': address, 'enabled': enabled == 1}, indent=4, separators=(',',': '))
            data += ']}'
            return data
        elif method == 'disseminatePreEncryptedMsg':
            # The device issuing this command to PyBitmessage supplies a msg object that has
            # already been encrypted and had the necessary proof of work done for it to be
            # disseminated to the rest of the Bitmessage network. PyBitmessage accepts this msg
            # object and sends it out to the rest of the Bitmessage network as if it had generated the
            # message itself. Please do not yet add this to the api doc.
            if len(params) != 1:
                raise APIError(0, 'I need 1 parameter!')
            encryptedPayload, = params
            encryptedPayload = self._decode(encryptedPayload, "hex")
            toStreamNumber = decodeVarint(encryptedPayload[16:26])[0]
            inventoryHash = calculateInventoryHash(encryptedPayload)
            objectType = 'msg'
            shared.inventory[inventoryHash] = (
                objectType, toStreamNumber, encryptedPayload, int(time.time()))
            with shared.printLock:
                print 'Broadcasting inv for msg(API disseminatePreEncryptedMsg command):', inventoryHash.encode('hex')
            shared.broadcastToSendDataQueues((
                toStreamNumber, 'sendinv', inventoryHash))
        elif method == 'disseminatePubkey':
            # The device issuing this command to PyBitmessage supplies a pubkey object that has
            # already had the necessary proof of work done for it to be disseminated to the rest of the 
            # Bitmessage network. PyBitmessage accepts this pubkey object and sends it out to the 
            # rest of the Bitmessage network as if it had generated the pubkey object itself. Please
            # do not yet add this to the api doc.
            if len(params) != 1:
                raise APIError(0, 'I need 1 parameter!')
            payload, = params
            payload = self._decode(payload, "hex")
            pubkeyReadPosition = 8 # bypass the nonce
            if payload[pubkeyReadPosition:pubkeyReadPosition+4] == '\x00\x00\x00\x00': # if this pubkey uses 8 byte time
                pubkeyReadPosition += 8
            else:
                pubkeyReadPosition += 4
            addressVersion, addressVersionLength = decodeVarint(payload[pubkeyReadPosition:pubkeyReadPosition+10])
            pubkeyReadPosition += addressVersionLength
            pubkeyStreamNumber = decodeVarint(payload[pubkeyReadPosition:pubkeyReadPosition+10])[0]
            inventoryHash = calculateInventoryHash(payload)
            objectType = 'pubkey'
            shared.inventory[inventoryHash] = (
                objectType, pubkeyStreamNumber, payload, int(time.time()))
            with shared.printLock:
                print 'broadcasting inv within API command disseminatePubkey with hash:', inventoryHash.encode('hex')
            shared.broadcastToSendDataQueues((
                streamNumber, 'sendinv', inventoryHash))
        elif method == 'getMessageDataByDestinationHash':
            # Method will eventually be used by a particular Android app to 
            # select relevant messages. Do not yet add this to the api
            # doc.
            
            if len(params) != 1:
                raise APIError(0, 'I need 1 parameter!')
            requestedHash, = params
            if len(requestedHash) != 40:
                raise APIError(19, 'The length of hash should be 20 bytes (encoded in hex thus 40 characters).')
            requestedHash = self._decode(requestedHash, "hex")
            
            # This is not a particularly commonly used API function. Before we 
            # use it we'll need to fill out a field in our inventory database 
            # which is blank by default (first20bytesofencryptedmessage). 
            queryreturn = sqlQuery(
                '''SELECT hash, payload FROM inventory WHERE first20bytesofencryptedmessage = '' and objecttype = 'msg' ; ''')
            with SqlBulkExecute() as sql:
                for row in queryreturn:
                    hash, payload = row
                    readPosition = 16 # Nonce length + time length
                    readPosition += decodeVarint(payload[readPosition:readPosition+10])[1] # Stream Number length
                    t = (payload[readPosition:readPosition+20],hash)
                    sql.execute('''UPDATE inventory SET first20bytesofencryptedmessage=? WHERE hash=?; ''', *t)
                
            queryreturn = sqlQuery('''SELECT payload FROM inventory WHERE first20bytesofencryptedmessage = ?''',
                                   requestedHash)
            data = '{"receivedMessageDatas":['
            for row in queryreturn:
                payload, = row
                if len(data) > 25:
                    data += ','
                data += json.dumps({'data':payload.encode('hex')}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'getPubkeyByHash':
            # Method will eventually be used by a particular Android app to 
            # retrieve pubkeys. Please do not yet add this to the api docs.
            if len(params) != 1:
                raise APIError(0, 'I need 1 parameter!')
            requestedHash, = params
            if len(requestedHash) != 40:
                raise APIError(19, 'The length of hash should be 20 bytes (encoded in hex thus 40 characters).')
            requestedHash = self._decode(requestedHash, "hex")
            queryreturn = sqlQuery('''SELECT transmitdata FROM pubkeys WHERE hash = ? ; ''', requestedHash)
            data = '{"pubkey":['
            for row in queryreturn:
                transmitdata, = row
                data += json.dumps({'data':transmitdata.encode('hex')}, indent=4, separators=(',', ': '))
            data += ']}'
            return data
        elif method == 'clientStatus':
            if len(shared.connectedHostsList) == 0:
                networkStatus = 'notConnected'
            elif len(shared.connectedHostsList) > 0 and not shared.clientHasReceivedIncomingConnections:
                networkStatus = 'connectedButHaveNotReceivedIncomingConnections'
            else:
                networkStatus = 'connectedAndReceivingIncomingConnections'
            return json.dumps({'networkConnections':len(shared.connectedHostsList),'numberOfMessagesProcessed':shared.numberOfMessagesProcessed, 'numberOfBroadcastsProcessed':shared.numberOfBroadcastsProcessed, 'numberOfPubkeysProcessed':shared.numberOfPubkeysProcessed, 'networkStatus':networkStatus}, indent=4, separators=(',', ': '))
        else:
            raise APIError(20, 'Invalid method: %s' % method)
def log_warn(msg):
    logger.warn( "BitcoinThread> %s" % ( msg, ) )
def log_warn(msg):
    logger.warn( "VotingData> %s" % ( msg, ) )