def device_guided_add_mdns(request, mdns_id):
# TODO - Add user permissioning
# if not request.user.has_perm('app.add_device'):
# messages.error(request, 'Your account is not permissioned to add devices. Please contact an admin')
# return redirect("/")
# Originally I thought we needed to rescan the network, but so long as ESP8266 is the only device that supports WiFi
# We can use mdns_id alone to handle the initial values
# installed_devices, available_devices = mdnsLocator.find_mdns_devices()
#
# mdns_device = None
#
# for this_device in available_devices:
# if this_device['mDNSname'] == mdns_id:
# mdns_device = this_device
#
# if mdns_device is None:
# redirect('device_guided_mdns')
if request.POST:
form = device_forms.DeviceForm(request.POST)
if form.is_valid():
new_device = BrewPiDevice(
device_name=form.cleaned_data['device_name'],
temp_format=form.cleaned_data['temp_format'],
data_point_log_interval=form.cleaned_data['data_point_log_interval'],
useInetSocket=form.cleaned_data['useInetSocket'],
socketPort=form.cleaned_data['socketPort'],
socketHost=form.cleaned_data['socketHost'],
serial_port=form.cleaned_data['serial_port'],
serial_alt_port=form.cleaned_data['serial_alt_port'],
board_type=form.cleaned_data['board_type'],
socket_name=form.cleaned_data['socket_name'],
connection_type=form.cleaned_data['connection_type'],
wifi_host=form.cleaned_data['wifi_host'],
wifi_port=form.cleaned_data['wifi_port'],
)
new_device.save()
messages.success(request, u'Device {} Added. Please wait a few seconds for controller to start'.format(new_device))
return redirect("/")
else:
return render_with_devices(request, template_name='setup/device_guided_add_mdns.html', context={'form': form})
else:
random_port = random.randint(2000,3000)
# If we were just passed to the form, provide the initial values
initial_values = {'board_type': 'esp8266', 'wifi_host': mdns_id, 'wifi_port': 23, 'connection_type': 'wifi',
'socketPort': random_port, 'temp_format': config.TEMPERATURE_FORMAT}
form = device_forms.DeviceForm(initial=initial_values)
return render_with_devices(request, template_name='setup/device_guided_add_mdns.html', context={'form': form})
def add_device(request):
# TODO - Add user permissioning
# if not request.user.has_perm('app.add_device'):
# messages.error(request, 'Your account is not permissioned to add devices. Please contact an admin')
# return redirect("/")
if request.POST:
form = device_forms.DeviceForm(request.POST)
if form.is_valid():
# TODO - Add support for editing to this
new_device = BrewPiDevice(
device_name=form.cleaned_data['device_name'],
temp_format=form.cleaned_data['temp_format'],
data_point_log_interval=form.
cleaned_data['data_point_log_interval'],
useInetSocket=form.cleaned_data['useInetSocket'],
socketPort=form.cleaned_data['socketPort'],
socketHost=form.cleaned_data['socketHost'],
serial_port=form.cleaned_data['serial_port'],
serial_alt_port=form.cleaned_data['serial_alt_port'],
board_type=form.cleaned_data['board_type'],
socket_name=form.cleaned_data['socket_name'],
connection_type=form.cleaned_data['connection_type'],
wifi_host=form.cleaned_data['wifi_host'],
wifi_port=form.cleaned_data['wifi_port'],
)
new_device.save()
messages.success(
request,
'Device {} Added.<br>Please wait a few seconds for controller to start'
.format(new_device.device_name))
return redirect("/")
else:
return render_with_devices(request,
template_name='device_add.html',
context={'form': form})
else:
# We don't want two devices to have the same port, and the port number doesn't really matter. Just
# randomize it.
random_port = random.randint(2000, 3000)
initial_values = {
'socketPort': random_port,
'temp_format': config.TEMPERATURE_FORMAT
}
form = device_forms.DeviceForm(initial=initial_values)
return render_with_devices(request,
template_name='device_add.html',
context={'form': form})
def device_guided_serial_autodetect(request, device_family):
# TODO - Add user permissioning
# if not request.user.has_perm('app.add_device'):
# messages.error(request, 'Your account is not permissioned to add devices. Please contact an admin')
# return redirect("/")
# device_guided_serial_autodetect contains all 4 steps in the Serial autodetection guided setup.
if not request.POST:
# If we haven't had something posted to us, provide the instructions page. (Step 1)
return render_with_devices(
request,
template_name='setup/device_guided_serial_autodetect_1.html',
context={'device_family': device_family})
else:
# Something was posted - figure out what step we're on by looking at the "step" field
if 'step' not in request.POST:
# We received a form, but not the right form. Redirect to the start of the autodetection flow.
return render_with_devices(
request,
template_name='setup/device_guided_serial_autodetect_1.html',
context={'device_family': device_family})
elif request.POST['step'] == "2":
# Step 2 - Cache the current devices & present the next set of instructions to the user
current_devices = serial_integration.cache_current_devices()
return render_with_devices(
request,
template_name='setup/device_guided_serial_autodetect_2.html',
context={
'device_family': device_family,
'current_devices': current_devices
})
elif request.POST['step'] == "3":
# Step 3 - Detect newly-connected devices & prompt the user to select the one that corresponds to the
# device they want to configure.
_, _, _, new_devices_enriched = serial_integration.compare_current_devices_against_cache(
device_family)
return render_with_devices(
request,
template_name='setup/device_guided_serial_autodetect_3.html',
context={
'device_family': device_family,
'new_devices': new_devices_enriched
})
elif request.POST['step'] == "4":
# Step 4 - MAGIC.
if 'serial_port' in request.POST:
form = device_forms.DeviceForm(request.POST)
if form.is_valid():
new_device = BrewPiDevice(
device_name=form.cleaned_data['device_name'],
temp_format=form.cleaned_data['temp_format'],
data_point_log_interval=form.
cleaned_data['data_point_log_interval'],
useInetSocket=form.cleaned_data['useInetSocket'],
socketPort=form.cleaned_data['socketPort'],
socketHost=form.cleaned_data['socketHost'],
serial_port=form.cleaned_data['serial_port'],
serial_alt_port=form.cleaned_data['serial_alt_port'],
board_type=form.cleaned_data['board_type'],
socket_name=form.cleaned_data['socket_name'],
connection_type=form.cleaned_data['connection_type'],
wifi_host=form.cleaned_data['wifi_host'],
wifi_port=form.cleaned_data['wifi_port'],
prefer_connecting_via_udev=form.
cleaned_data['prefer_connecting_via_udev'],
)
new_device.save()
# Once the device is added, go ahead and autodetect the udev serial number.
if new_device.connection_type == BrewPiDevice.CONNECTION_SERIAL:
new_device.set_udev_from_port()
messages.success(
request,
u'Dispositivo {} Agregado. Espere unos segundos para comenzar'
.format(new_device))
return redirect("/")
else:
return render_with_devices(
request,
template_name=
'setup/device_guided_serial_autodetect_4_add.html',
context={
'form': form,
'device_family': device_family
})
else:
random_port = random.randint(2000, 3000)
# If we were just passed to the form, provide the initial values
# TODO - Correctly determine 'board_type'
if device_family == 'ESP8266':
board_type = 'esp8266'
elif device_family == 'Arduino':
board_type = 'uno'
else:
# Invalid board type - shouldn't ever get here.
messages.error(
request,
"Tipo de placa inválida para la autodetección por serial"
)
return redirect("/")
initial_values = {
'board_type': board_type,
'serial_port': request.POST['device'],
'connection_type': 'serial',
'socketPort': random_port,
'temp_format': config.TEMPERATURE_FORMAT
}
form = device_forms.DeviceForm(initial=initial_values)
return render_with_devices(
request,
template_name=
'setup/device_guided_serial_autodetect_4_add.html',
context={
'form': form,
'device_family': device_family
})
elif request.POST['step'] == "5":
pass
else:
# The step number we received was invalid. Redirect to the start of the autodetection flow.
return render_with_devices(
request,
template_name='setup/device_guided_serial_autodetect_1.html',
context={'device_family': device_family})
def device_manage(request, device_id):
# TODO - Add user permissioning
# if not request.user.has_perm('app.edit_device'):
# messages.error(request, 'Your account is not permissioned to edit devices. Please contact an admin')
# return redirect("/")
try:
active_device = BrewPiDevice.objects.get(id=device_id)
except:
messages.error(request,
"Unable to load device with ID {}".format(device_id))
return redirect('siteroot')
# Forms posted back to device_manage are explicitly settings update forms
if request.POST:
form = device_forms.DeviceForm(request.POST)
if form.is_valid():
# Update the device settings based on what we were passed via the form
active_device.device_name = form.cleaned_data['device_name']
active_device.temp_format = form.cleaned_data['temp_format']
active_device.data_point_log_interval = form.cleaned_data[
'data_point_log_interval']
active_device.useInetSocket = form.cleaned_data['useInetSocket']
active_device.socketPort = form.cleaned_data['socketPort']
active_device.socketHost = form.cleaned_data['socketHost']
active_device.serial_port = form.cleaned_data['serial_port']
active_device.serial_alt_port = form.cleaned_data[
'serial_alt_port']
# Not going to allow editing the board type. Can revisit if there seems to be a need later
# active_device.board_type=form.cleaned_data['board_type']
active_device.socket_name = form.cleaned_data['socket_name']
active_device.connection_type = form.cleaned_data[
'connection_type']
active_device.wifi_host = form.cleaned_data['wifi_host']
active_device.wifi_port = form.cleaned_data['wifi_port']
active_device.save()
messages.success(
request,
'Device {} Updated.<br>Please wait a few seconds for the connection to restart'
.format(active_device.device_name))
# TODO - Trigger Circus to reload properly, rather than using an external script
cmd = "nohup utils/reset_circus.sh"
subprocess.call(cmd, shell=True)
return render_with_devices(request,
template_name='device_manage.html',
context={
'form': form,
'active_device': active_device
})
else:
return render_with_devices(request,
template_name='device_manage.html',
context={
'form': form,
'active_device': active_device
})
else:
# This would probably be easier if I was to use ModelForm instead of Form, but at this point I don't feel like
# refactoring it. Project for later if need be.
initial_values = {
'device_name': active_device.device_name,
'temp_format': active_device.temp_format,
'data_point_log_interval': active_device.data_point_log_interval,
'connection_type': active_device.connection_type,
'useInetSocket': active_device.useInetSocket,
'socketPort': active_device.socketPort,
'socketHost': active_device.socketHost,
'serial_port': active_device.serial_port,
'serial_alt_port': active_device.serial_alt_port,
'board_type': active_device.board_type,
'socket_name': active_device.socket_name,
'wifi_host': active_device.wifi_host,
'wifi_port': active_device.wifi_port,
}
form = device_forms.DeviceForm(initial=initial_values)
return render_with_devices(request,
template_name='device_manage.html',
context={
'form': form,
'active_device': active_device
})