class MainWindow(Base, Form):
startUpScan = QtCore.pyqtSignal()
startDownScan = QtCore.pyqtSignal()
setDIL_T = QtCore.pyqtSignal(int)
setDIL_T_scan_time = QtCore.pyqtSignal(int)
usbMeasure = QtCore.pyqtSignal()
def __init__(self, state, parent=None):
super(Base, self).__init__(parent)
self.setupUi(self)
self.state = state
settings = state.settings
self.nonthermo = uic.loadUi("nonthermo.ui")
self.otherWidget = uic.loadUi("other.ui")
self.scannerSelect = uic.loadUi("scannerselect.ui")
self.zone = SecondaryWidget(settings["Secondary"])
self.usbWidget = USBWidget(settings["USB"])
self.pcieWidget = DragonWidget(settings["PCIE"])
self.correctorWidget = CorrectorWidget(settings["DistanceCorrector"])
self.scannerWidget = ScannerWidget(settings["TimeScanner"])
self.scannerWidget.groupBox.setTitle("On chip scanner")
self.DILTScannerWidget = ScannerWidget(settings["DIL_TScanner"],
name="DIL_Tscanner")
self.DILTScannerWidget.groupBox.setTitle("DIL_T scanner")
self.scannerSelect.layout().insertWidget(1, self.scannerWidget)
self.scannerSelect.layout().insertWidget(3, self.DILTScannerWidget)
self.nonthermo.layout().addWidget(self.scannerSelect, 0, 0, 3, 1)
self.nonthermo.layout().addWidget(self.otherWidget, 2, 1, 1, 1)
self.nonthermo.layout().addWidget(self.zone, 0, 1, 1, 1)
self.nonthermo.layout().addWidget(self.correctorWidget, 1, 1, 1, 1)
self.usbWidget.tabWidget.insertTab(2, self.nonthermo, "Scanning setup")
self.usbWidget.tabWidget.insertTab(3, self.pcieWidget, "Dragon")
sizePolicy = QtGui.QSizePolicy(QtGui.QSizePolicy.Maximum,
QtGui.QSizePolicy.Preferred)
self.usbWidget.setSizePolicy(sizePolicy)
self.settings.addWidget(self.usbWidget, 0, 0, 1, 1)
dragonrect = QtCore.QRectF(0, plots.SIGNAL_BOT, REF_LEN,
plots.SIGNAL_TOP - plots.SIGNAL_BOT)
self.dragonplot = plots.Plot(dragonrect, self)
self.temperatureplot = plots.TempPlot()
self.spectraplot = plots.SlicePlot(self)
self.distanceplot = plots.Plot(QtCore.QRectF(0, -500, REF_LEN, 2*500),
self, zeroed=True, points=True,
lines=True, levels=[0,0,1000,1000],
ncurves=8)
self.diffsPlot = plots.Plot(QtCore.QRectF(0, -500, REF_LEN, 2*500),
self, zeroed=False, points=True,
lines=True, levels=[0,0,1000,1000],
ncurves=8)
self.graphTabs = QtGui.QTabWidget(self)
self.primaryGraphs = uic.loadUi("nonthermo.ui")
self.primaryGraphs.layout().addWidget(self.spectraplot, 0, 0, 1, 1)
self.primaryGraphs.layout().addWidget(self.temperatureplot, 0, 1)
self.primaryGraphs.layout().addWidget(self.dragonplot, 1, 1)
self.primaryGraphs.layout().addWidget(self.distanceplot, 1, 0, 1, 1)
self.graphTabs.insertTab(0, self.primaryGraphs, "primary")
self.secondaryGraphs = uic.loadUi("nonthermo.ui")
self.secondaryGraphs.layout().addWidget(self.diffsPlot, 0, 0, 1, 1)
self.graphTabs.insertTab(1, self.secondaryGraphs, "secondary")
self.plots.addWidget(self.graphTabs, 0,0,1,1)
#TODO: Further init code does not describe window but program logic.
# It should be separated.
self.PFGITscanner = scanner.TimeScanner(settings["TimeScanner"])
self.DIL_Tscanner = scanner.TimeScanner(settings["DIL_TScanner"])
self.collector = Collector(65520, settings["TimeScanner"]["nsteps"])
self.memoryupdater = MemoryUpdater(self)
self.correlator = Correlator(self)
self.maximizer = Maximizer(self)
self.secondary = secondary.Model(settings["Secondary"])
if is_interactive:
self.interaction = interaction.Model()
self.corraverager = Averager(self)
self.corraverager.setNumber(settings["TimeScanner"]["averageNumber"])
self.connectScanerWidget()
self.connectOtherWidget()
self.spectraplot.setChannel(self.otherWidget.plotChannel.value())
self.corrector = DistanceCorrector(self)
self.connectCorrectorWidget()
corrector_settings = state.settings["DistanceCorrector"]
self.corrector.setTargetDistance(corrector_settings["distance"])
self.corrector.setA(corrector_settings["A"])
self.corrector.setEnabled(corrector_settings["enabled"])
self.corrector.setChannel(corrector_settings["channel"])
self.corrector.setReaction(settings["USB"]["DIL_T"])
self.maximizer.measured.connect(self.corrector.appendDistances)
self.corrector.correct.connect(lambda val: self.state.update("USB", ("DIL_T", val)))
state.subscribe("USB",
lambda diff: None if diff[0] != "DIL_T" else self.corrector.setReaction(diff[1]))
self.temperatureplot.t0 = lambda v:self.temperatureplot.myplot(v, 0)
self.temperatureplot.t1 = lambda v:self.temperatureplot.myplot(v, 1)
self.collector.temperatureCurveChanged.connect(self.temperatureplot.t0)
self.collector.temperatureCurve2Changed.connect(self.temperatureplot.t1)
self.collector.setReflectogrammLength(state.settings["PCIE"]["framelength"])
self.status = "waiting"
self.start = time.time()
self.time_prev = time.time()
self.resp_amp = []
self.laserscanner = "PFGIT"
self.enablePFGITscanner(True)
self.scannerSelect.PFGIT.toggled.connect(self.enablePFGITscanner)
if self.scannerSelect.PFGIT.isChecked():
print "PFGIT enabled"
self.maximizer.set_bottom(self.scannerWidget.bottom.value())
self.maximizer.set_dt(self.scannerWidget.dt())
else:
print "DILT enabled"
self.maximizer.set_bottom(self.DILTScannerWidget.bottom.value())
self.maximizer.set_dt(self.DILTScannerWidget.dt())
#WARNING old code! revision may be needed
#self.collector.reflectogrammChanged.connect(self.dragonplot.myplot)
self.collector.spectraOnChipChanged.connect(self.spectraplot.setData)
# This connections must be replaced with clear code
self.collector.sharedArrayChanged.connect(self.memoryupdater.updateShared)
self.memoryupdater.updated.connect(self.correlator.update)
self.memoryupdater.updateShared((self.collector.shared, (2,) + self.collector.upScanMatrix.shape))
self.correlator.setDt(1.)
self.correlator.measured.connect(self.distanceplot.myplot)
self.scannerWidget.averageNumber.valueChanged.connect(self.corraverager.setNumber)
self.distanceplot.d2 = lambda t: self.distanceplot.myplot(t, n=3)
self.distanceplot.d3 = lambda t: self.distanceplot.myplot(t, n=4)
self.corraverager.measured.connect(self.distanceplot.d2)
self.pcieWidget.framelength.valueChanged.connect(self.collector.setReflectogrammLength)
self.measuretimer = self.startTimer(1000)
#self.FOL2timer = self.startTimer(self.usbWidget.FOL2_period.value())
self.pcieWidget.framelength.valueChanged.connect(self.change_scan_time)
self.pcieWidget.framecount.valueChanged.connect(self.change_scan_time)
self.DILTScannerWidget.nsteps.valueChanged.connect(self.change_scan_time)
self.change_scan_time()
self.showMaximized()
self.plotsOnly = False
self.plotsFreezed = False
self.DILTScannerWidget.nsteps.valueChanged.connect(self.collector.setSpectraLength)
self.DIL_Tscanner.scanPositionChanged.connect(self.DILTScannerWidget.position.setNum)
self.scannerWidget.nsteps.valueChanged.connect(self.collector.setSpectraLength)
self.PFGITscanner.scanPositionChanged.connect(self.scannerWidget.position.setNum)
self.scannerWidget.dtChanged.connect(self.maximizer.set_dt)
self.scannerWidget.bottom.valueChanged.connect(
self.maximizer.set_bottom)
self.otherWidget.work.toggled.connect(self.on_work)
def on_work(self, val):
if not val:
self.status = "idle"
else:
self.status = "waiting"
def on_wait(self, data):
t, T1, T2 = self.collector.get_actual_temperature(2 * EXT_STAB_TIME)
targets = [self.state.settings["USB"]["T1set"],
self.state.settings["USB"]["T2set"]]
if logic.check_stability(t, [T1, T2], targets, EXT_STAB_TIME):
self.status = "searching"
self.state.update("PCIE", ("framecount", 200))
print "Searching"
middle = (self.state.settings["TimeScanner"]["top"] +
self.state.settings["TimeScanner"]["bottom"]) / 2
self.state.update("USB", ("PFGI_TscanAmp", middle))
setter = lambda x: self.state.update("USB", ("DIL_T", x))
dt = INT_STAB_RATE * SEARCH_STEP / 3
logic.init_search(SEARCH_BOT, SEARCH_TOP, SEARCH_STEP,
dt, setter)
def on_scan(self, pcie_dev_response):
self.collector.appendDragonResponse(pcie_dev_response)
submatrix_to_process = None
if self.laserscanner == "DILT":
self.collector.appendOnChipTemperature(
self.DIL_Tscanner.scan_position)
self.DIL_Tscanner.scan()
self.collector.setNextIndex(self.DIL_Tscanner.pos)
if self.DIL_Tscanner.top_reached:
self.startDownScan.emit()
elif self.DIL_Tscanner.bottom_reached:
self.startUpScan.emit()
if (self.DIL_Tscanner.top_reached or
self.DIL_Tscanner.bottom_reached):
submatrix_to_process = self.DIL_Tscanner.lastsubmatrix
if self.laserscanner == "PFGIT":
self.collector.appendOnChipTemperature(
self.PFGITscanner.scan_position)
self.PFGITscanner.scan()
self.collector.setNextIndex(self.PFGITscanner.pos)
self.state.update("USB", ("PFGI_TscanAmp", self.PFGITscanner.targetT))
if (self.PFGITscanner.top_reached or
self.PFGITscanner.bottom_reached):
submatrix_to_process = self.PFGITscanner.lastsubmatrix
if submatrix_to_process is not None:
self.start_processing(submatrix_to_process)
def start_processing(self, submatrix):
data_reg = [self.state.settings["Secondary"]["start"],
self.state.settings["Secondary"]["length"]]
insane_inds = logic.check_spectra_insanity(submatrix, data_reg)
if insane_inds:
print "Insane channels:", insane_inds
if len(insane_inds) == self.state.settings["Secondary"]["length"]:
print "All specrta are broken, searching"
self.status = "searching"
return
primary = self.correlator.process_submatrix(submatrix)
self.maximizer.process_submatrix(submatrix)
averages = self.corraverager.appendDistances(primary)
if averages is not None:
self.secondary(averages[0])
self.process_secondary()
if is_interactive:
self.interaction(self.secondary.process.results)
def on_search(self, data):
t, T1, T2 = self.collector.get_actual_temperature(2 * EXT_STAB_TIME)
targets = [self.state.settings["USB"]["T1set"],
self.state.settings["USB"]["T2set"]]
if not logic.check_stability(t, [T1, T2], targets, EXT_STAB_TIME):
return
new_range = logic.search(data)
if new_range is None:
return
print "New search range", new_range
bot, top = new_range
if top - bot > 10:
setter = lambda x: self.state.update("USB", ("DIL_T", x))
step = max(1,
SEARCH_STEP * (bot - top) / (SEARCH_BOT - SEARCH_TOP))
dt = INT_STAB_RATE * step
logic.init_search(bot, top, step, dt, setter)
else:
mid = int((bot + top) / 2)
self.state.update("USB", ("DIL_T", mid))
self.state.update("PCIE", ("framecount", 1000))
print "Setting DIL_T to %d" % mid
self.start_PFGIT_scan(True, 25000)
self.scannerWidget.accurateScan.blockSignals(True)
self.scannerWidget.accurateScan.setChecked(True)
self.scannerWidget.accurateScan.blockSignals(False)
self.status = "preparing_scan"
def on_new_reflectogramm(self, pcie_dev_response):
data = pcie_dev_response.data
data = data[:pcie_dev_response.framelength]
self.dragonplot.myplot(data)
if self.status == "waiting":
self.on_wait(data)
elif self.status == "searching":
self.on_search(data)
elif self.status == "scanning":
self.on_scan(pcie_dev_response)
elif self.status == "idle":
pass
def change_scan_time(self):
framelength = self.pcieWidget.framelength.value()
framecount = self.pcieWidget.framecount.value()
ndot = self.DILTScannerWidget.nsteps.value()
time = 2 * framelength * framecount * ndot / 133000000
print "Estimated scan time is ", time, " seconds"
self.setDIL_T_scan_time.emit(time)
def enablePFGITscanner(self, val):
self.DILTScannerWidget.setEnabled(not val)
self.scannerWidget.setEnabled(val)
if val:
print "scanning with PFGIT"
if self.status == "scanning":
self.start_DILT_scan(False)
self.collector.setSpectraLength(self.PFGITscanner.ndot)
else:
print "scanning with DILT"
self.collector.setSpectraLength(self.DIL_Tscanner.ndot)
if self.status == "scanning":
self.startaccuratetimescan(False)
def saveView(self):
savepath = "/home/dts050511/dumps/" + datetime.now().isoformat().replace(":", "-") + ".png"
QtGui.QPixmap.grabWidget(self).save(savepath)
def timerEvent(self, timer):
if timer.timerId() == self.measuretimer:
self.usbMeasure.emit()
def start_PFGIT_scan(self, val, wait_time=5000):
if val:
self.state.update("USB", ("PFGI_TscanAmp", self.PFGITscanner.bot))
self.conttimer = QtCore.QTimer()
self.conttimer.setSingleShot(True)
self.conttimer.setInterval(wait_time)
self.conttimer.timeout.connect(self._cont)
self.conttimer.start()
print "wait {0} sec..".format(int(wait_time / 1000))
else:
print "stopping PFGIT scan"
if not self.status == "scanning":
self.conttimer.timeout.disconnect(self._cont)
else:
self.status = "idle"
def start_DILT_scan(self, val):
if val:
self.setDIL_T.emit(self.DIL_Tscanner.bot)
self.conttimer = QtCore.QTimer()
self.conttimer.setSingleShot(True)
self.conttimer.setInterval(5000)
self.conttimer.timeout.connect(self._cont_DILT)
self.conttimer.start()
print "wait 5 sec.."
else:
print "stopping DILT scan"
if not self.status == "scanning":
self.conttimer.timeout.disconnect(self._cont_DILT)
else:
self.status = "idle"
def mouseDoubleClickEvent(self, event):
widgets = [self.usbWidget]
if self.plotsOnly:
for w in widgets:
w.show()
self.plotsOnly = False
else:
for w in widgets:
w.hide()
self.plotsOnly = True
def keyPressEvent(self, event):
if event.key() == QtCore.Qt.Key_F1:
self.freezeGraphs()
super(Base, self).keyPressEvent(event)
def freezeGraphs(self):
if self.plotsFreezed:
self.collector.reflectogrammChanged.connect(self.dragonplot.myplot)
self.collector.spectraOnChipChanged.connect(self.spectraplot.setData)
self.collector.temperatureCurveChanged.connect(self.temperatureplot.t0)
self.collector.temperatureCurve2Changed.connect(self.temperatureplot.t1)
self.correlator.measured.connect(self.distanceplot.myplot)
self.corraverager.measured.connect(self.distanceplot.d2)
else:
self.collector.reflectogrammChanged.disconnect(self.dragonplot.myplot)
self.collector.spectraOnChipChanged.disconnect(self.spectraplot.setData)
self.collector.temperatureCurveChanged.disconnect(self.temperatureplot.t0)
self.collector.temperatureCurve2Changed.disconnect(self.temperatureplot.t1)
self.correlator.measured.disconnect(self.distanceplot.myplot)
self.corraverager.measured.disconnect(self.distanceplot.d2)
self.plotsFreezed = not self.plotsFreezed
def _cont(self):
print "started scanning with PFGIT"
self.status = "scanning"
self.laserscanner = "PFGIT"
self.collector.clear()
self.PFGITscanner.reset()
self.collector.setNextIndex(self.PFGITscanner.pos)
def _cont_DILT(self):
print "started scanning with DILT"
self.status = "scanning"
self.laserscanner = "DIL"
self.collector.clear()
self.DIL_Tscanner.reset()
self.collector.setNextIndex(self.DIL_Tscanner.pos)
self.startUpScan()
def process_secondary(self):
for i in range(4):
diff = self.secondary.diffs[i] - (i - 1.5) * 20
self.diffsPlot.myplot(diff, n=i)
print self.secondary.results.shape
print self.secondary.results[:,990:1010]
print self.secondary.results[:,10990:11010]
print np.sum(self.secondary.results, axis=1)
def connectCorrectorWidget(self):
self.correctorWidget.A.valueChanged.connect(self.corrector.setA)
self.correctorWidget.channel.valueChanged.connect(self.corrector.setChannel)
self.correctorWidget.enabled.toggled.connect(self.corrector.setEnabled)
self.correctorWidget.distance.valueChanged.connect(self.corrector.setTargetDistance)
def connectScanerWidget(self):
self.scannerWidget.top.valueChanged.connect(self.PFGITscanner.setTop)
self.scannerWidget.bottom.valueChanged.connect(self.PFGITscanner.setBottom)
self.scannerWidget.nsteps.valueChanged.connect(self.PFGITscanner.setNdot)
self.scannerWidget.accurateScan.clicked.connect(self.start_PFGIT_scan)
self.DILTScannerWidget.top.valueChanged.connect(self.DIL_Tscanner.setTop)
self.DILTScannerWidget.bottom.valueChanged.connect(self.DIL_Tscanner.setBottom)
self.DILTScannerWidget.nsteps.valueChanged.connect(self.DIL_Tscanner.setNdot)
self.DILTScannerWidget.accurateScan.clicked.connect(self.start_DILT_scan)
def connectOtherWidget(self):
self.otherWidget.plotChannel.valueChanged.connect(self.spectraplot.setChannel)
self.otherWidget.saveData.clicked.connect(self.collector.savelastscan)
self.otherWidget.saveView.clicked.connect(self.saveView)
self.otherWidget.inverse.toggled.connect(
self.collector.setInversion)
def start_FOL2_oscilation(self):
self.killTimer(self.FOL2timer)
self.FOL2timer = self.startTimer(self.usbWidget.FOL2_period.value())
def closeEvent(self, event):
pass
class MainWindow(Base, Form):
def __init__(self, parent=None):
super(Base, self).__init__(parent)
self.setupUi(self)
self.otherWidget = uic.loadUi("other.ui")
self.scannerSelect = uic.loadUi("scannerselect.ui")
self.usbWidget = USBWidget()
self.pcieWidget = DragonWidget()
self.correctorWidget = CorrectorWidget()
self.scannerWidget = ScannerWidget()
self.scannerWidget.groupBox.setTitle("On chip scanner")
self.DILTScannerWidget = ScannerWidget(name="DIL_Tscanner")
self.DILTScannerWidget.groupBox.setTitle("DIL_T scanner")
self.settings.addWidget(self.pcieWidget, 0, 0, 1, 1)
self.settings.addWidget(self.usbWidget, 0, 1, 5, 1)
self.scannerSelect.layout().insertWidget(1, self.scannerWidget)
self.scannerSelect.layout().insertWidget(3, self.DILTScannerWidget)
self.settings.addWidget(self.scannerSelect, 1, 0, 1, 1)
self.settings.addWidget(self.correctorWidget, 3, 0, 1, 1)
self.settings.addWidget(self.otherWidget, 4, 0, 1, 1)
dragonrect = QtCore.QRectF(0, plots.SIGNAL_BOT, 8*6144,
plots.SIGNAL_TOP - plots.SIGNAL_BOT)
self.dragonplot = plots.Plot(dragonrect, self)
self.temperatureplot = plots.TempPlot()
self.spectraplot = plots.SlicePlot(self)
self.distanceplot = plots.Plot(QtCore.QRectF(0, -500, 8*6144, 2*500), self, zeroed=True, points=True, levels=[0,0,1000,1000], ncurves=4)
#for widget in [self.dragonplot, self.temperatureplot, self.spectraplot, self.distanceplot]:
# widget.setSizePolicy(QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Minimum)
self.plots.addWidget(self.spectraplot, 0, 0, 1, 1)
self.plots.addWidget(self.temperatureplot, 0, 1)
self.plots.addWidget(self.dragonplot, 1, 1)
self.plots.addWidget(self.distanceplot, 1, 0, 1, 1)
self.usbWorker = USBWorker()
self.precollector = Precollector(self)
self.collector = Collector(49140, self.scannerWidget.nsteps.value())
self.memoryupdater = MemoryUpdater(self)
self.correlator = Correlator(self)
self.approximator = Approximator(self)
self.maximizer = Maximizer(self)
self.corraverager = Averager(self)
# self.correlator.measured.connect(self.corraverager.appendDistances)
self.appraverager = Averager(self)
# self.approximator.measured.connect(self.appraverager.appendDistances)
self.scanner = scanner.TimeScanner(n=self.scannerWidget.nsteps.value())
self.scanner.changeTemperature.connect(self.usbWorker.setPFGI_TscanAmp)
self.DIL_Tscanner = scanner.TimeScanner(n=self.DILTScannerWidget.nsteps.value())
#self.DIL_Tscanner.changeTemperature.connect(self.usbWorker.setDIL_T)
self.updateUSBSettingsView()
self.connectUSBSettingsWithInterface()
self.connectScanerWidget()
self.connectOtherWidget()
#TODO: self.pushButton.clicked.connect(CLEAR_TEMP_PLOT)
self.scanner.setTop(self.scannerWidget.top.value())
self.scanner.setBottom(self.scannerWidget.bottom.value())
self.scanner.setNdot(self.scannerWidget.nsteps.value())
self.DIL_Tscanner.setTop(self.DILTScannerWidget.top.value())
self.DIL_Tscanner.setBottom(self.DILTScannerWidget.bottom.value())
self.DIL_Tscanner.setNdot(self.DILTScannerWidget.nsteps.value())
self.corraverager.setNumber(self.scannerWidget.averageNumber.value())
self.spectraplot.setChannel(self.otherWidget.plotChannel.value())
self.corrector = DistanceCorrector(self)
self.connectCorrectorWidget()
self.corrector.setTargetDistance(self.correctorWidget.distance.value())
self.corrector.setA(self.correctorWidget.A.value())
self.corrector.setEnabled(self.correctorWidget.enabled.isChecked())
self.corrector.setChannel(self.correctorWidget.channel.value())
self.corrector.setReaction(self.usbWidget.spinBox_6.value())
self.maximizer.measured.connect(self.corrector.appendDistances)
self.corrector.correct.connect(self.usbWidget.spinBox_6.setValue)
self.usbWidget.spinBox_6.valueChanged.connect(self.corrector.setReaction)
self.usbWorker.measured.connect(self.usbWidget.showResponse)
self.usbWorker.measured.connect(self.collector.appendUSBResponse)
self.usbWorker.statusChanged.connect(self.usbWidget.label_status.setText)
self.temperatureplot.t0 = lambda v:self.temperatureplot.myplot(v, 0)
self.temperatureplot.t1 = lambda v:self.temperatureplot.myplot(v, 1)
self.collector.temperatureCurveChanged.connect(self.temperatureplot.t0)
self.collector.temperatureCurve2Changed.connect(self.temperatureplot.t1)
self.pcieClient = pcie.PCIENetWorker()
self.pcieClient.setPCIESettings(self.pcieWidget.value())
self.pcieClient.measured.connect(self.precollector.appendDragonResponse)
self.precollector.reflectogrammChanged.connect(self.dragonplot.myplot)
self.collector.setReflectogrammLength(self.pcieWidget.framelength.value())
self.pcieClient.start()
#self.pcieClient.measured.connect(lambda x: self.dragonplot.myplot(x.data))
self.isScanning = False
self.enablePulseScanner(True)
self.scannerSelect.pulse.toggled.connect(self.enablePulseScanner)
self.pcieWidget.valueChanged.connect(self.pcieClient.setPCIESettings)
#WARNING old code! revision may be needed
#self.collector.reflectogrammChanged.connect(self.dragonplot.myplot)
self.collector.spectraOnChipChanged.connect(self.spectraplot.setData)
#self.collector.spectraChanged.connect(mypeakdetection)
self.collector.sharedArrayChanged.connect(self.memoryupdater.updateShared)
self.memoryupdater.updated.connect(self.correlator.update)
self.memoryupdater.updated.connect(self.approximator.update)
#self.scanner.dtChanged.connect(self.correlator.setDt)
#self.scanner.dtChanged.connect(self.approximator.setDt)
self.memoryupdater.updateShared((self.collector.shared, (2,) + self.collector.upScanMatrix.shape))
#self.correlator.setDt(65535. / self.scannerWidget.nsteps.value())
self.correlator.setDt(1.)
self.correlator.measured.connect(self.distanceplot.myplot)
#self.approximator.measured.connect(lambda t: self.distanceplot.myplot(t, n=1))
self.scannerWidget.averageNumber.valueChanged.connect(self.corraverager.setNumber)
self.scannerWidget.averageNumber.valueChanged.connect(self.appraverager.setNumber)
self.distanceplot.d2 = lambda t: self.distanceplot.myplot(t, n=3)
self.corraverager.measured.connect(self.distanceplot.d2)
#self.appraverager.measured.connect(lambda t: self.distanceplot.myplot(t, n=3))
self.pcieWidget.framelength.valueChanged.connect(self.collector.setReflectogrammLength)
self.measuretimer = self.startTimer(1000)
#self.FOL2timer = self.startTimer(self.usbWidget.FOL2_period.value())
self.pcieWidget.framelength.valueChanged.connect(self.change_scan_time)
self.pcieWidget.framecount.valueChanged.connect(self.change_scan_time)
self.DILTScannerWidget.nsteps.valueChanged.connect(self.change_scan_time)
self.change_scan_time()
self.usbWorker.setDIL_T_scan_top(self.DILTScannerWidget.top.value())
self.usbWorker.setDIL_T_scan_bottom(self.DILTScannerWidget.bottom.value())
self.scanner.dtChanged.connect(self.maximizer.set_dt)
self.scanner.bottomChanged.connect(self.maximizer.set_bottom)
self.scanner.updaterange()
self.showMaximized()
self.plotsOnly = False
self.plotsFreezed = False
def change_scan_time(self):
framelength = self.pcieWidget.framelength.value()
framecount = self.pcieWidget.framecount.value()
ndot = self.DILTScannerWidget.nsteps.value()
time = 2 * framelength * framecount * ndot / 133000000
print "Estimated scan time is {} seconds".format(time)
self.usbWorker.setDIL_T_scan_time(time)
def enablePulseScanner(self, val):
self.DILTScannerWidget.setEnabled(not val)
self.scannerWidget.setEnabled(val)
if val:
print "scanning with pulse"
try:
self.collector.reflectogrammChanged.disconnect(self.DIL_Tscanner.measure)
except TypeError:
pass
try:
self.DIL_Tscanner.measured.disconnect(self.collector.appendOnChipTemperature)
except TypeError:
pass
try:
self.DILTScannerWidget.nsteps.valueChanged.disconnect(self.collector.setSpectraLength)
except TypeError:
pass
try:
self.DIL_Tscanner.scanPositionChanged.disconnect(self.DILTScannerWidget.position.setNum)
except TypeError:
pass
try:
self.DIL_Tscanner.nextIndexChanged.connect(self.collector.setNextIndex)
except TypeError:
pass
if self.isScanning:
self.start_DILT_scan(False)
self.collector.reflectogrammChanged.connect(self.scanner.measure)
self.scanner.measured.connect(self.collector.appendOnChipTemperature)
self.scannerWidget.nsteps.valueChanged.connect(self.collector.setSpectraLength)
self.collector.setSpectraLength(self.scanner.ndot)
self.scanner.scanPositionChanged.connect(self.scannerWidget.position.setNum)
self.scanner.nextIndexChanged.connect(self.collector.setNextIndex)
else:
print "scanning with cont"
self.collector.reflectogrammChanged.connect(self.DIL_Tscanner.measure)
self.DIL_Tscanner.measured.connect(self.collector.appendOnChipTemperature)
self.DILTScannerWidget.nsteps.valueChanged.connect(self.collector.setSpectraLength)
self.collector.setSpectraLength(self.DIL_Tscanner.ndot)
self.DIL_Tscanner.scanPositionChanged.connect(self.DILTScannerWidget.position.setNum)
self.DIL_Tscanner.nextIndexChanged.connect(self.collector.setNextIndex)
try:
self.collector.reflectogrammChanged.disconnect(self.scanner.measure)
except TypeError:
pass
try:
self.scanner.measured.disconnect(self.collector.appendOnChipTemperature)
except TypeError:
pass
try:
self.scannerWidget.nsteps.valueChanged.disconnect(self.collector.setSpectraLength)
except TypeError:
pass
try:
self.scanner.scanPositionChanged.disconnect(self.scannerWidget.position.setNum)
except TypeError:
pass
try:
self.scanner.nextIndexChanged.connect(self.collector.setNextIndex)
except TypeError:
pass
if self.isScanning:
self.startaccuratetimescan(False)
def saveView(self):
savepath = "/home/gleb/dumps/" + datetime.now().isoformat().replace(":", "-") + ".png"
QtGui.QPixmap.grabWidget(self).save(savepath)
def timerEvent(self, timer):
if timer.timerId() == self.measuretimer:
self.usbWorker.measure()
def startaccuratetimescan(self, val):
if val:
self.usbWorker.setPFGI_TscanAmp(self.scanner.bot)
self.conttimer = QtCore.QTimer()
self.conttimer.setSingleShot(True)
self.conttimer.setInterval(5000)
self.conttimer.timeout.connect(self._cont)
self.conttimer.start()
print "wait 5 sec.."
else:
print "stopping pulsed scan"
if not self.isScanning:
self.conttimer.timeout.disconnect(self._cont)
else:
self.isScanning = False
self.collector.reflectogrammChanged.disconnect(self.scanner.scan)
self.pcieClient.measured.disconnect(self.collector.appendDragonResponse)
self.approximator.reset()
self.scanner.boundaryReached.disconnect(
self.approximator.process_submatrix)
self.scanner.boundaryReached.disconnect(
self.correlator.process_submatrix)
self.scanner.boundaryReached.disconnect(
self.maximizer.process_submatrix)
def start_DILT_scan(self, val):
if val:
self.usbWorker.setDIL_T(self.DIL_Tscanner.bot)
self.conttimer = QtCore.QTimer()
self.conttimer.setSingleShot(True)
self.conttimer.setInterval(5000)
self.conttimer.timeout.connect(self._cont_DILT)
self.conttimer.start()
print "wait 5 sec.."
else:
print "stopping cont scan"
if not self.isScanning:
self.conttimer.timeout.disconnect(self._cont_DILT)
else:
self.isScanning = False
self.collector.reflectogrammChanged.disconnect(self.DIL_Tscanner.scan)
self.pcieClient.measured.disconnect(self.collector.appendDragonResponse)
self.DIL_Tscanner.topReached.disconnect(self.usbWorker.start_down_scan)
self.DIL_Tscanner.bottomReached.disconnect(self.usbWorker.start_up_scan)
self.DIL_Tscanner.boundaryReached.disconnect(
self.approximator.process_submatrix)
self.DIL_Tscanner.boundaryReached.disconnect(
self.correlator.process_submatrix)
self.DIL_Tscanner.boundaryReached.disconnect(
self.maximizer.process_submatrix)
self.approximator.reset()
def mouseDoubleClickEvent(self, event):
widgets = [self.usbWidget, self.pcieWidget, self.scannerSelect,
self.otherWidget, self.correctorWidget]
if self.plotsOnly:
for w in widgets:
w.show()
self.plotsOnly = False
else:
for w in widgets:
w.hide()
self.plotsOnly = True
def keyPressEvent(self, event):
print event.key()
print "123"
if event.key() == QtCore.Qt.Key_F1:
print "F1 pressed"
self.freezeGraphs()
super(Base, self).keyPressEvent(event)
def freezeGraphs(self):
if self.plotsFreezed:
self.collector.reflectogrammChanged.connect(self.dragonplot.myplot)
self.collector.spectraOnChipChanged.connect(self.spectraplot.setData)
self.collector.temperatureCurveChanged.connect(self.temperatureplot.t0)
self.collector.temperatureCurve2Changed.connect(self.temperatureplot.t1)
self.correlator.measured.connect(self.distanceplot.myplot)
self.corraverager.measured.connect(self.distanceplot.d2)
else:
self.collector.reflectogrammChanged.disconnect(self.dragonplot.myplot)
self.collector.spectraOnChipChanged.disconnect(self.spectraplot.setData)
self.collector.temperatureCurveChanged.disconnect(self.temperatureplot.t0)
self.collector.temperatureCurve2Changed.disconnect(self.temperatureplot.t1)
self.correlator.measured.disconnect(self.distanceplot.myplot)
self.corraverager.measured.disconnect(self.distanceplot.d2)
self.plotsFreezed = not self.plotsFreezed
def _cont(self):
print "started"
self.isScanning = True
self.collector.clear()
print "cleared"
self.scanner.reset()
print "reset"
self.pcieClient.measured.connect(self.collector.appendDragonResponse)
#self.precollector.averaged.connect(self.collector.appendDragonResponse)
self.scanner.scan()
self.collector.reflectogrammChanged.connect(self.scanner.scan)
self.scanner.boundaryReached.connect(
self.approximator.process_submatrix)
self.scanner.boundaryReached.connect(
self.correlator.process_submatrix)
self.scanner.boundaryReached.connect(
self.maximizer.process_submatrix)
def _cont_DILT(self):
print "started"
self.isScanning = True
self.collector.clear()
self.DIL_Tscanner.reset()
self.pcieClient.measured.connect(self.collector.appendDragonResponse)
#self.precollector.averaged.connect(self.collector.appendDragonResponse)
self.DIL_Tscanner.scan()
self.usbWorker.start_up_scan()
self.collector.reflectogrammChanged.connect(self.DIL_Tscanner.scan)
self.DIL_Tscanner.topReached.connect(self.usbWorker.start_down_scan)
self.DIL_Tscanner.bottomReached.connect(self.usbWorker.start_up_scan)
self.DIL_Tscanner.boundaryReached.connect(
self.approximator.process_submatrix)
self.DIL_Tscanner.boundaryReached.connect(
self.correlator.process_submatrix)
self.DIL_Tscanner.boundaryReached.connect(
self.maximizer.process_submatrix)
def connectCorrectorWidget(self):
self.correctorWidget.A.valueChanged.connect(self.corrector.setA)
self.correctorWidget.channel.valueChanged.connect(self.corrector.setChannel)
self.correctorWidget.enabled.toggled.connect(self.corrector.setEnabled)
self.correctorWidget.distance.valueChanged.connect(self.corrector.setTargetDistance)
def connectScanerWidget(self):
self.scannerWidget.top.valueChanged.connect(self.scanner.setTop)
self.scannerWidget.bottom.valueChanged.connect(self.scanner.setBottom)
self.scannerWidget.nsteps.valueChanged.connect(self.scanner.setNdot)
self.scannerWidget.accurateScan.clicked.connect(self.startaccuratetimescan)
self.DILTScannerWidget.top.valueChanged.connect(self.DIL_Tscanner.setTop)
self.DILTScannerWidget.bottom.valueChanged.connect(self.DIL_Tscanner.setBottom)
self.DILTScannerWidget.nsteps.valueChanged.connect(self.DIL_Tscanner.setNdot)
self.DILTScannerWidget.accurateScan.clicked.connect(self.start_DILT_scan)
self.DILTScannerWidget.top.valueChanged.connect(self.usbWorker.setDIL_T_scan_top)
self.DILTScannerWidget.bottom.valueChanged.connect(self.usbWorker.setDIL_T_scan_bottom)
def connectOtherWidget(self):
self.otherWidget.plotChannel.valueChanged.connect(self.spectraplot.setChannel)
self.otherWidget.saveData.clicked.connect(self.collector.savelastscan)
self.otherWidget.saveView.clicked.connect(self.saveView)
self.otherWidget.flashSTM.clicked.connect(self.usbWorker.flash)
def connectUSBSettingsWithInterface(self):
widget = self.usbWidget
widget.spinBox.valueChanged.connect(self.usbWorker.setPFGI_amplitude)
widget.spinBox_2.valueChanged.connect(self.usbWorker.setPFGI_pedestal)
widget.checkBox.toggled.connect(self.usbWorker.setPC4)
widget.checkBox_2.toggled.connect(self.usbWorker.setPC5)
widget.spinBox_5.valueChanged.connect(self.usbWorker.setDIL_I)
widget.spinBox_6.valueChanged.connect(self.usbWorker.setDIL_T)
widget.spinBox_7.valueChanged.connect(self.usbWorker.setPFGI_Tset)
widget.spinBox_8.valueChanged.connect(self.usbWorker.setPFGI_TscanAmp)
widget.spinBox_3.valueChanged.connect(self.usbWorker.setPROM_hv)
widget.spinBox_4.valueChanged.connect(self.usbWorker.setPROM_shift)
widget.spinBox_9.valueChanged.connect(self.usbWorker.setFOL1_I)
widget.spinBox_10.valueChanged.connect(self.usbWorker.setFOL1_T)
widget.spinBox_11.valueChanged.connect(self.usbWorker.setFOL2_I)
widget.spinBox_12.valueChanged.connect(self.usbWorker.setFOL2_T)
widget.spinBox_a1.valueChanged.connect(self.usbWorker.setA1)
widget.spinBox_a2.valueChanged.connect(self.usbWorker.setA2)
widget.spinBox_a3.valueChanged.connect(self.usbWorker.setA3)
widget.spinBox_b1.valueChanged.connect(self.usbWorker.setB1)
widget.spinBox_b2.valueChanged.connect(self.usbWorker.setB2)
widget.spinBox_b3.valueChanged.connect(self.usbWorker.setB3)
widget.spinBox_c1.valueChanged.connect(self.usbWorker.setC1)
widget.spinBox_c2.valueChanged.connect(self.usbWorker.setC2)
widget.spinBox_c3.valueChanged.connect(self.usbWorker.setC3)
widget.spinBox_t1.valueChanged.connect(self.usbWorker.setT1set)
widget.spinBox_t2.valueChanged.connect(self.usbWorker.setT2set)
widget.spinBox_t3.valueChanged.connect(self.usbWorker.setT3set)
widget.radioButton.toggled.connect(self.usbWorker.setPID)
widget.spinBox_TScanPeriod.valueChanged.connect(self.usbWorker.setPFGI_TscanPeriod)
widget.checkBox_3.toggled.connect(self.usbWorker.setDiode)
def updateUSBSettingsView(self):
widget = self.usbWidget
file = self.usbWorker.usbSettings.file
widget.spinBox_a1.setValue(file.value("A1").toInt()[0])
widget.spinBox_a2.setValue(file.value("A2").toInt()[0])
widget.spinBox_a3.setValue(file.value("A3").toInt()[0])
widget.spinBox_b1.setValue(file.value("B1").toInt()[0])
widget.spinBox_b2.setValue(file.value("B2").toInt()[0])
widget.spinBox_b3.setValue(file.value("B3").toInt()[0])
widget.spinBox_c1.setValue(file.value("C1").toInt()[0])
widget.spinBox_c2.setValue(file.value("C2").toInt()[0])
widget.spinBox_c3.setValue(file.value("C3").toInt()[0])
widget.spinBox_t1.setValue(file.value("T1set").toInt()[0])
widget.spinBox_t2.setValue(file.value("T2set").toInt()[0])
widget.spinBox_t3.setValue(file.value("T3set").toInt()[0])
widget.checkBox.setChecked(file.value("PC4").toBool())
widget.checkBox_2.setChecked(file.value("PC5").toBool())
widget.spinBox.setValue(file.value("PFGI_amplitude").toInt()[0])
widget.spinBox_2.setValue(file.value("PFGI_pedestal").toInt()[0])
widget.spinBox_3.setValue(file.value("PROM_hv").toInt()[0])
widget.spinBox_4.setValue(file.value("PROM_shift").toInt()[0])
widget.spinBox_5.setValue(file.value("DIL_I").toInt()[0])
widget.spinBox_6.setValue(file.value("DIL_T").toInt()[0])
widget.spinBox_7.setValue(file.value("PFGI_Tset").toInt()[0])
widget.spinBox_8.setValue(file.value("PFGI_TscanAmp").toInt()[0])
widget.spinBox_TScanPeriod.setValue(
file.value("PFGI_TscanPeriod").toInt()[0])
widget.spinBox_9.setValue(file.value("FOL1_I").toInt()[0])
widget.spinBox_10.setValue(file.value("FOL1_T").toInt()[0])
widget.spinBox_11.setValue(file.value("FOL2_I").toInt()[0])
widget.spinBox_12.setValue(file.value("FOL2_T").toInt()[0])
def start_FOL2_oscilation(self):
self.killTimer(self.FOL2timer)
self.FOL2timer = self.startTimer(self.usbWidget.FOL2_period.value())