class Crucible:
def __init__(self):
GMSH_EPS = 1.0e-15
# https://fenicsproject.org/qa/12891/initialize-mesh-from-vertices-connectivities-at-once
points, cells, point_data, cell_data, _ = meshes.crucible_with_coils.generate(
)
# Convert the cell data to 'uint' so we can pick a size_t MeshFunction
# below as usual.
for k0 in cell_data:
for k1 in cell_data[k0]:
cell_data[k0][k1] = numpy.array(cell_data[k0][k1],
dtype=numpy.dtype("uint"))
with TemporaryDirectory() as temp_dir:
tmp_filename = os.path.join(temp_dir, "test.xml")
meshio.write_points_cells(
tmp_filename,
points,
cells,
cell_data=cell_data,
file_format="dolfin-xml",
)
self.mesh = Mesh(tmp_filename)
self.subdomains = MeshFunction(
"size_t", self.mesh,
os.path.join(temp_dir, "test_gmsh:physical.xml"))
self.subdomain_materials = {
1: my_materials.porcelain,
2: materials.argon,
3: materials.gallium_arsenide_solid,
4: materials.gallium_arsenide_liquid,
27: materials.air,
}
# coils
for k in range(5, 27):
self.subdomain_materials[k] = my_materials.ek90
# Define the subdomains which together form a single coil.
self.coil_domains = [
[5, 6, 7, 8, 9],
[10, 11, 12, 13, 14],
[15, 16, 17, 18, 19],
[20, 21, 22, 23],
[24, 25, 26],
]
self.wpi = 4
self.submesh_workpiece = SubMesh(self.mesh, self.subdomains, self.wpi)
# http://fenicsproject.org/qa/2026/submesh-workaround-for-parallel-computation
# submesh_parallel_bug_fixed = False
# if submesh_parallel_bug_fixed:
# submesh_workpiece = SubMesh(self.mesh, self.subdomains, self.wpi)
# else:
# # To get the mesh in parallel, we need to read it in from a file.
# # Writing out can only happen in serial mode, though. :/
# base = os.path.join(current_path,
# '../../meshes/2d/crucible-with-coils-submesh'
# )
# filename = base + '.xml'
# if not os.path.isfile(filename):
# warnings.warn(
# 'Submesh file \'{}\' does not exist. Creating... '.format(
# filename
# ))
# if MPI.size(mpi_comm_world()) > 1:
# raise RuntimeError(
# 'Can only write submesh in serial mode.'
# )
# submesh_workpiece = \
# SubMesh(self.mesh, self.subdomains, self.wpi)
# output_stream = File(filename)
# output_stream << submesh_workpiece
# # Read the mesh
# submesh_workpiece = Mesh(filename)
coords = self.submesh_workpiece.coordinates()
ymin = min(coords[:, 1])
ymax = max(coords[:, 1])
# Find the top right point.
k = numpy.argmax(numpy.sum(coords, 1))
topright = coords[k, :]
# Initialize mesh function for boundary domains
class Left(SubDomain):
def inside(self, x, on_boundary):
# Explicitly exclude the lowest and the highest point of the
# symmetry axis.
# It is necessary for the consistency of the pressure-Poisson
# system in the Navier-Stokes solver that the velocity is
# exactly 0 at the boundary r>0. Hence, at the corner points
# (r=0, melt-crucible, melt-crystal) we must enforce u=0
# already and cannot have a component in z-direction.
return (on_boundary and x[0] < GMSH_EPS
and x[1] < ymax - GMSH_EPS and x[1] > ymin + GMSH_EPS)
class Crucible(SubDomain):
def inside(self, x, on_boundary):
return on_boundary and (
(x[0] > GMSH_EPS and x[1] < ymax - GMSH_EPS) or
(x[0] > topright[0] - GMSH_EPS
and x[1] > topright[1] - GMSH_EPS) or
(x[0] < GMSH_EPS and x[1] < ymin + GMSH_EPS))
# At the top right part (boundary melt--gas), slip is allowed, so only
# n.u=0 is enforced. Very weirdly, the PPE is consistent if and only if
# the end points of UpperRight are in UpperRight. This contrasts
# Left(), where the end points must NOT belong to Left(). Judging from
# the experiments, these settings do the right thing.
# TODO try to better understand the PPE system/dolfin's boundary
# settings
class Upper(SubDomain):
def inside(self, x, on_boundary):
return on_boundary and x[1] > ymax - GMSH_EPS
class UpperRight(SubDomain):
def inside(self, x, on_boundary):
return (on_boundary and x[1] > ymax - GMSH_EPS
and x[0] > 0.038 - GMSH_EPS)
# The crystal boundary is taken to reach up to 0.038 where the
# Dirichlet boundary data is about the melting point of the crystal,
# 1511K. This setting gives pretty acceptable results when there is no
# convection except the one induced by buoyancy. Is there is any more
# stirring going on, though, the end point of the crystal with its
# fixed temperature of 1511K might be the hottest point globally. This
# looks rather unphysical.
# TODO check out alternatives
class UpperLeft(SubDomain):
def inside(self, x, on_boundary):
return (on_boundary and x[1] > ymax - GMSH_EPS
and x[0] < 0.038 + GMSH_EPS)
left = Left()
crucible = Crucible()
upper_left = UpperLeft()
upper_right = UpperRight()
self.wp_boundaries = MeshFunction(
"size_t",
self.submesh_workpiece,
self.submesh_workpiece.topology().dim() - 1,
)
self.wp_boundaries.set_all(0)
left.mark(self.wp_boundaries, 1)
crucible.mark(self.wp_boundaries, 2)
upper_right.mark(self.wp_boundaries, 3)
upper_left.mark(self.wp_boundaries, 4)
if DEBUG:
from dolfin import plot, interactive
plot(self.wp_boundaries, title="Boundaries")
interactive()
submesh_boundary_indices = {
"left": 1,
"crucible": 2,
"upper right": 3,
"upper left": 4,
}
# Boundary conditions for the velocity.
#
# [1] Incompressible flow and the finite element method; volume two;
# Isothermal Laminar Flow;
# P.M. Gresho, R.L. Sani;
#
# For the choice of function space, [1] says:
# "In 2D, the triangular elements P_2^+P_1 and P_2^+P_{-1} are very
# good [...]. [...] If you wish to avoid bubble functions on
# triangular elements, P_2P_1 is not bad, and P_2(P_1+P_0) is even
# better [...]."
#
# It turns out that adding the bubble space significantly hampers the
# convergence of the Stokes solver and also considerably increases the
# time it takes to construct the Jacobian matrix of the Navier--Stokes
# problem if no optimization is applied.
V_element = FiniteElement("CG", self.submesh_workpiece.ufl_cell(), 2)
with_bubbles = False
if with_bubbles:
V_element += FiniteElement("B", self.submesh_workpiece.ufl_cell(),
2)
self.W_element = MixedElement(3 * [V_element])
self.W = FunctionSpace(self.submesh_workpiece, self.W_element)
rot0 = Expression(("0.0", "0.0", "-2*pi*x[0] * 5.0/60.0"), degree=1)
# rot0 = (0.0, 0.0, 0.0)
rot1 = Expression(("0.0", "0.0", "2*pi*x[0] * 5.0/60.0"), degree=1)
self.u_bcs = [
DirichletBC(self.W, rot0, crucible),
DirichletBC(self.W.sub(0), 0.0, left),
DirichletBC(self.W.sub(2), 0.0, left),
# Make sure that u[2] is 0 at r=0.
DirichletBC(self.W, rot1, upper_left),
DirichletBC(self.W.sub(1), 0.0, upper_right),
]
self.p_bcs = []
self.P_element = FiniteElement("CG", self.submesh_workpiece.ufl_cell(),
1)
self.P = FunctionSpace(self.submesh_workpiece, self.P_element)
self.Q_element = FiniteElement("CG", self.submesh_workpiece.ufl_cell(),
2)
self.Q = FunctionSpace(self.submesh_workpiece, self.Q_element)
# Dirichlet.
# This is a bit of a tough call since the boundary conditions need to
# be read from a Tecplot file here.
filename = os.path.join(os.path.dirname(os.path.realpath(__file__)),
"data/crucible-boundary.dat")
data = tecplot_reader.read(filename)
RZ = numpy.c_[data["ZONE T"]["node data"]["r"],
data["ZONE T"]["node data"]["z"]]
T_vals = data["ZONE T"]["node data"]["temp. [K]"]
class TecplotDirichletBC(Expression):
def eval(self, value, x):
# Find on which edge x sits, and raise exception if it doesn't.
edge_found = False
for edge in data["ZONE T"]["element data"]:
# Given a point X and an edge X0--X1,
#
# (1 - theta) X0 + theta X1,
#
# the minimum distance is assumed for
#
# argmin_theta ||(1-theta) X0 + theta X1 - X||^2
# = <X1 - X0, X - X0> / ||X1 - X0||^2.
#
# If the distance is 0 and 0<=theta<=1, we found the edge.
#
# Note that edges are 1-based in Tecplot.
X0 = RZ[edge[0] - 1]
X1 = RZ[edge[1] - 1]
theta = numpy.dot(X1 - X0, x - X0) / numpy.dot(
X1 - X0, X1 - X0)
diff = (1.0 - theta) * X0 + theta * X1 - x
if (numpy.dot(diff, diff) < 1.0e-10 and 0.0 <= theta
and theta <= 1.0):
# Linear interpolation of the temperature value.
value[0] = (1.0 - theta) * T_vals[
edge[0] - 1] + theta * T_vals[edge[1] - 1]
edge_found = True
break
# This class is supposed to be used for Dirichlet boundary
# conditions. For some reason, FEniCS also evaluates
# DirichletBC objects at coordinates which do not sit on the
# boundary, see
# <http://fenicsproject.org/qa/1033/dirichletbc-expressions-evaluated-away-from-the-boundary>.
# The assigned values have no meaning though, so not assigning
# values[0] here is okay.
#
# from matplotlib import pyplot as pp
# pp.plot(x[0], x[1], 'xg')
if not edge_found:
value[0] = 0.0
if False:
warnings.warn(
"Coordinate ({:e}, {:e}) doesn't sit on edge.".
format(x[0], x[1]))
# pp.plot(RZ[:, 0], RZ[:, 1], '.k')
# pp.plot(x[0], x[1], 'xr')
# pp.show()
# raise RuntimeError('Input coordinate '
# '{} is not on boundary.'.format(x))
return
tecplot_dbc = TecplotDirichletBC(degree=5)
self.theta_bcs_d = [DirichletBC(self.Q, tecplot_dbc, upper_left)]
self.theta_bcs_d_strict = [
DirichletBC(self.Q, tecplot_dbc, upper_right),
DirichletBC(self.Q, tecplot_dbc, crucible),
DirichletBC(self.Q, tecplot_dbc, upper_left),
]
# Neumann
dTdr_vals = data["ZONE T"]["node data"]["dTempdx [K/m]"]
dTdz_vals = data["ZONE T"]["node data"]["dTempdz [K/m]"]
class TecplotNeumannBC(Expression):
def eval(self, value, x):
# Same problem as above: This expression is not only evaluated
# at boundaries.
for edge in data["ZONE T"]["element data"]:
X0 = RZ[edge[0] - 1]
X1 = RZ[edge[1] - 1]
theta = numpy.dot(X1 - X0, x - X0) / numpy.dot(
X1 - X0, X1 - X0)
dist = numpy.linalg.norm((1 - theta) * X0 + theta * X1 - x)
if dist < 1.0e-5 and 0.0 <= theta and theta <= 1.0:
value[0] = (1 - theta) * dTdr_vals[
edge[0] - 1] + theta * dTdr_vals[edge[1] - 1]
value[1] = (1 - theta) * dTdz_vals[
edge[0] - 1] + theta * dTdz_vals[edge[1] - 1]
break
return
def value_shape(self):
return (2, )
tecplot_nbc = TecplotNeumannBC(degree=5)
n = FacetNormal(self.Q.mesh())
self.theta_bcs_n = {
submesh_boundary_indices["upper right"]: dot(n, tecplot_nbc),
submesh_boundary_indices["crucible"]: dot(n, tecplot_nbc),
}
self.theta_bcs_r = {}
# It seems that the boundary conditions from above are inconsistent in
# that solving with Dirichlet overall and mixed Dirichlet-Neumann give
# different results; the value *cannot* correspond to one solution.
# From looking at the solutions, the pure Dirichlet setting appears
# correct, so extract the Neumann values directly from that solution.
# Pick fixed coefficients roughly at the temperature that we expect.
# This could be made less magic by having the coefficients depend on
# theta and solving the quasilinear equation.
temp_estimate = 1550.0
# Get material parameters
wp_material = self.subdomain_materials[self.wpi]
if isinstance(wp_material.specific_heat_capacity, float):
cp = wp_material.specific_heat_capacity
else:
cp = wp_material.specific_heat_capacity(temp_estimate)
if isinstance(wp_material.density, float):
rho = wp_material.density
else:
rho = wp_material.density(temp_estimate)
if isinstance(wp_material.thermal_conductivity, float):
k = wp_material.thermal_conductivity
else:
k = wp_material.thermal_conductivity(temp_estimate)
reference_problem = cyl_heat.Heat(
self.Q,
convection=None,
kappa=k,
rho=rho,
cp=cp,
source=Constant(0.0),
dirichlet_bcs=self.theta_bcs_d_strict,
)
theta_reference = reference_problem.solve_stationary()
theta_reference.rename("theta", "temperature (Dirichlet)")
# Create equivalent boundary conditions from theta_ref. This
# makes sure that the potentially expensive Expression evaluation in
# theta_bcs_* is replaced by something reasonably cheap.
self.theta_bcs_d = [
DirichletBC(bc.function_space(), theta_reference,
bc.domain_args[0]) for bc in self.theta_bcs_d
]
# Adapt Neumann conditions.
n = FacetNormal(self.Q.mesh())
self.theta_bcs_n = {
k: dot(n, grad(theta_reference))
# k: Constant(1000.0)
for k in self.theta_bcs_n
}
if DEBUG:
# Solve the heat equation with the mixed Dirichlet-Neumann
# boundary conditions and compare it to the Dirichlet-only
# solution.
theta_new = Function(self.Q,
name="temperature (Neumann + Dirichlet)")
from dolfin import Measure
ds_workpiece = Measure("ds", subdomain_data=self.wp_boundaries)
heat = cyl_heat.Heat(
self.Q,
convection=None,
kappa=k,
rho=rho,
cp=cp,
source=Constant(0.0),
dirichlet_bcs=self.theta_bcs_d,
neumann_bcs=self.theta_bcs_n,
robin_bcs=self.theta_bcs_r,
my_ds=ds_workpiece,
)
theta_new = heat.solve_stationary()
theta_new.rename("theta", "temperature (Neumann + Dirichlet)")
from dolfin import plot, interactive, errornorm
print("||theta_new - theta_ref|| = {:e}".format(
errornorm(theta_new, theta_reference)))
plot(theta_reference)
plot(theta_new)
plot(theta_reference - theta_new, title="theta_ref - theta_new")
interactive()
self.background_temp = 1400.0
# self.omega = 2 * pi * 10.0e3
self.omega = 2 * pi * 300.0
return
subdomains.mark(cell_domains, 1)
if MPI.size(mpi_comm_world()) == 1:
submesh = SubMesh(mesh, cell_domains, 1)
else:
submesh = create_submesh(mesh, cell_domains, 1)
#MPI.barrier(mpi_comm_world())
#continue
V = FunctionSpace(submesh, "CG", 2)
expr = Expression("x[0]*x[1]*x[1]+4*x[2]", degree=2)
u = project(expr, V)
MPI.barrier(mpi_comm_world())
s0 = submesh.size_global(0)
s3 = submesh.size_global(submesh.ufl_cell().topological_dimension())
a = assemble(u * dx)
v = assemble(Constant(1) * dx(domain=submesh))
if MPI.rank(mpi_comm_world()) == 0:
print("Num vertices: ", s0)
print("Num cells: ", s3)
print("assemble(u*dx): ", a)
print("Volume: ", v)
#u = Function(V)
#File("u.pvd") << u
#import ipdb; ipdb.set_trace()
#print mesh.num_cells()
#print dir(mesh)
#print mesh.cells()