def main():
parser = argparse.ArgumentParser(description=__doc__)
parser.add_argument(
"--target_realtime_rate", type=float, default=1.0,
help="Desired rate relative to real time. See documentation for "
"Simulator::set_target_realtime_rate() for details.")
parser.add_argument(
"--duration", type=float, default=np.inf,
help="Desired duration of the simulation in seconds.")
parser.add_argument(
"--hardware", action='store_true',
help="Use the ManipulationStationHardwareInterface instead of an "
"in-process simulation.")
parser.add_argument(
"--test", action='store_true',
help="Disable opening the gui window for testing.")
parser.add_argument(
"--filter_time_const", type=float, default=0.1,
help="Time constant for the first order low pass filter applied to"
"the teleop commands")
parser.add_argument(
"--velocity_limit_factor", type=float, default=1.0,
help="This value, typically between 0 and 1, further limits the "
"iiwa14 joint velocities. It multiplies each of the seven "
"pre-defined joint velocity limits. "
"Note: The pre-defined velocity limits are specified by "
"iiwa14_velocity_limits, found in this python file.")
parser.add_argument(
'--setup', type=str, default='manipulation_class',
help="The manipulation station setup to simulate. ",
choices=['manipulation_class', 'clutter_clearing', 'planar'])
parser.add_argument(
'--schunk_collision_model', type=str, default='box',
help="The Schunk collision model to use for simulation. ",
choices=['box', 'box_plus_fingertip_spheres'])
MeshcatVisualizer.add_argparse_argument(parser)
args = parser.parse_args()
builder = DiagramBuilder()
if args.hardware:
station = builder.AddSystem(ManipulationStationHardwareInterface())
station.Connect(wait_for_cameras=False)
else:
station = builder.AddSystem(ManipulationStation())
if args.schunk_collision_model == "box":
schunk_model = SchunkCollisionModel.kBox
elif args.schunk_collision_model == "box_plus_fingertip_spheres":
schunk_model = SchunkCollisionModel.kBoxPlusFingertipSpheres
# Initializes the chosen station type.
if args.setup == 'manipulation_class':
station.SetupManipulationClassStation(
schunk_model=schunk_model)
station.AddManipulandFromFile(
"drake/examples/manipulation_station/models/"
+ "061_foam_brick.sdf",
RigidTransform(RotationMatrix.Identity(), [0.6, 0, 0]))
elif args.setup == 'clutter_clearing':
station.SetupClutterClearingStation(
schunk_model=schunk_model)
ycb_objects = CreateClutterClearingYcbObjectList()
for model_file, X_WObject in ycb_objects:
station.AddManipulandFromFile(model_file, X_WObject)
elif args.setup == 'planar':
station.SetupPlanarIiwaStation(
schunk_model=schunk_model)
station.AddManipulandFromFile(
"drake/examples/manipulation_station/models/"
+ "061_foam_brick.sdf",
RigidTransform(RotationMatrix.Identity(), [0.6, 0, 0]))
station.Finalize()
# If using meshcat, don't render the cameras, since RgbdCamera
# rendering only works with drake-visualizer. Without this check,
# running this code in a docker container produces libGL errors.
if args.meshcat:
meshcat = ConnectMeshcatVisualizer(
builder, output_port=station.GetOutputPort("geometry_query"),
zmq_url=args.meshcat, open_browser=args.open_browser)
if args.setup == 'planar':
meshcat.set_planar_viewpoint()
elif args.setup == 'planar':
pyplot_visualizer = builder.AddSystem(PlanarSceneGraphVisualizer(
station.get_scene_graph()))
builder.Connect(station.GetOutputPort("pose_bundle"),
pyplot_visualizer.get_input_port(0))
else:
DrakeVisualizer.AddToBuilder(builder,
station.GetOutputPort("query_object"))
image_to_lcm_image_array = builder.AddSystem(
ImageToLcmImageArrayT())
image_to_lcm_image_array.set_name("converter")
for name in station.get_camera_names():
cam_port = (
image_to_lcm_image_array
.DeclareImageInputPort[PixelType.kRgba8U](
"camera_" + name))
builder.Connect(
station.GetOutputPort("camera_" + name + "_rgb_image"),
cam_port)
image_array_lcm_publisher = builder.AddSystem(
LcmPublisherSystem.Make(
channel="DRAKE_RGBD_CAMERA_IMAGES",
lcm_type=image_array_t,
lcm=None,
publish_period=0.1,
use_cpp_serializer=True))
image_array_lcm_publisher.set_name("rgbd_publisher")
builder.Connect(
image_to_lcm_image_array.image_array_t_msg_output_port(),
image_array_lcm_publisher.get_input_port(0))
robot = station.get_controller_plant()
params = DifferentialInverseKinematicsParameters(robot.num_positions(),
robot.num_velocities())
time_step = 0.005
params.set_timestep(time_step)
# True velocity limits for the IIWA14 (in rad, rounded down to the first
# decimal)
iiwa14_velocity_limits = np.array([1.4, 1.4, 1.7, 1.3, 2.2, 2.3, 2.3])
if args.setup == 'planar':
# Extract the 3 joints that are not welded in the planar version.
iiwa14_velocity_limits = iiwa14_velocity_limits[1:6:2]
# The below constant is in body frame.
params.set_end_effector_velocity_gain([1, 0, 0, 0, 1, 1])
# Stay within a small fraction of those limits for this teleop demo.
factor = args.velocity_limit_factor
params.set_joint_velocity_limits((-factor*iiwa14_velocity_limits,
factor*iiwa14_velocity_limits))
differential_ik = builder.AddSystem(DifferentialIK(
robot, robot.GetFrameByName("iiwa_link_7"), params, time_step))
builder.Connect(differential_ik.GetOutputPort("joint_position_desired"),
station.GetInputPort("iiwa_position"))
teleop = builder.AddSystem(EndEffectorTeleop(args.setup == 'planar'))
if args.test:
teleop.window.withdraw() # Don't display the window when testing.
filter = builder.AddSystem(
FirstOrderLowPassFilter(time_constant=args.filter_time_const, size=6))
builder.Connect(teleop.get_output_port(0), filter.get_input_port(0))
builder.Connect(filter.get_output_port(0),
differential_ik.GetInputPort("rpy_xyz_desired"))
wsg_buttons = builder.AddSystem(SchunkWsgButtons(teleop.window))
builder.Connect(wsg_buttons.GetOutputPort("position"),
station.GetInputPort("wsg_position"))
builder.Connect(wsg_buttons.GetOutputPort("force_limit"),
station.GetInputPort("wsg_force_limit"))
# When in regression test mode, log our joint velocities to later check
# that they were sufficiently quiet.
num_iiwa_joints = station.num_iiwa_joints()
if args.test:
iiwa_velocities = builder.AddSystem(SignalLogger(num_iiwa_joints))
builder.Connect(station.GetOutputPort("iiwa_velocity_estimated"),
iiwa_velocities.get_input_port(0))
else:
iiwa_velocities = None
diagram = builder.Build()
simulator = Simulator(diagram)
# This is important to avoid duplicate publishes to the hardware interface:
simulator.set_publish_every_time_step(False)
station_context = diagram.GetMutableSubsystemContext(
station, simulator.get_mutable_context())
station.GetInputPort("iiwa_feedforward_torque").FixValue(
station_context, np.zeros(num_iiwa_joints))
# If the diagram is only the hardware interface, then we must advance it a
# little bit so that first LCM messages get processed. A simulated plant is
# already publishing correct positions even without advancing, and indeed
# we must not advance a simulated plant until the sliders and filters have
# been initialized to match the plant.
if args.hardware:
simulator.AdvanceTo(1e-6)
q0 = station.GetOutputPort("iiwa_position_measured").Eval(
station_context)
differential_ik.parameters.set_nominal_joint_position(q0)
teleop.SetPose(differential_ik.ForwardKinematics(q0))
filter.set_initial_output_value(
diagram.GetMutableSubsystemContext(
filter, simulator.get_mutable_context()),
teleop.get_output_port(0).Eval(diagram.GetMutableSubsystemContext(
teleop, simulator.get_mutable_context())))
differential_ik.SetPositions(diagram.GetMutableSubsystemContext(
differential_ik, simulator.get_mutable_context()), q0)
simulator.set_target_realtime_rate(args.target_realtime_rate)
simulator.AdvanceTo(args.duration)
# Ensure that our initialization logic was correct, by inspecting our
# logged joint velocities.
if args.test:
for time, qdot in zip(iiwa_velocities.sample_times(),
iiwa_velocities.data().transpose()):
# TODO(jwnimmer-tri) We should be able to do better than a 40
# rad/sec limit, but that's the best we can enforce for now.
if qdot.max() > 0.1:
print(f"ERROR: large qdot {qdot} at time {time}")
sys.exit(1)
robot = station.get_controller_plant()
params = DifferentialInverseKinematicsParameters(robot.num_positions(),
robot.num_velocities())
time_step = 0.005
params.set_timestep(time_step)
# True velocity limits for the IIWA14 (in rad, rounded down to the first
# decimal)
iiwa14_velocity_limits = np.array([1.4, 1.4, 1.7, 1.3, 2.2, 2.3, 2.3])
# Stay within a small fraction of those limits for this teleop demo.
factor = args.velocity_limit_factor
params.set_joint_velocity_limits(
(-factor * iiwa14_velocity_limits, factor * iiwa14_velocity_limits))
differential_ik = builder.AddSystem(
DifferentialIK(robot, robot.GetFrameByName("iiwa_link_7"), params,
time_step))
builder.Connect(differential_ik.GetOutputPort("joint_position_desired"),
station.GetInputPort("iiwa_position"))
# Don't let mouse grab focus during testing.
grab_focus = not args.test
teleop = builder.AddSystem(MouseKeyboardTeleop(grab_focus=grab_focus))
filter = builder.AddSystem(
FirstOrderLowPassFilter(time_constant=args.filter_time_const, size=6))
builder.Connect(teleop.get_output_port(0), filter.get_input_port(0))
builder.Connect(filter.get_output_port(0),
differential_ik.GetInputPort("rpy_xyz_desired"))
builder.Connect(teleop.GetOutputPort("position"),
def main():
parser = argparse.ArgumentParser(description=__doc__)
parser.add_argument(
"--target_realtime_rate",
type=float,
default=1.0,
help="Desired rate relative to real time. See documentation for "
"Simulator::set_target_realtime_rate() for details.")
parser.add_argument("--duration",
type=float,
default=np.inf,
help="Desired duration of the simulation in seconds.")
parser.add_argument(
"--hardware",
action='store_true',
help="Use the ManipulationStationHardwareInterface instead of an "
"in-process simulation.")
parser.add_argument("--test",
action='store_true',
help="Disable opening the gui window for testing.")
parser.add_argument(
"--filter_time_const",
type=float,
default=0.005,
help="Time constant for the first order low pass filter applied to"
"the teleop commands")
parser.add_argument(
"--velocity_limit_factor",
type=float,
default=1.0,
help="This value, typically between 0 and 1, further limits the "
"iiwa14 joint velocities. It multiplies each of the seven "
"pre-defined joint velocity limits. "
"Note: The pre-defined velocity limits are specified by "
"iiwa14_velocity_limits, found in this python file.")
parser.add_argument('--setup',
type=str,
default='manipulation_class',
help="The manipulation station setup to simulate. ",
choices=['manipulation_class', 'clutter_clearing'])
MeshcatVisualizer.add_argparse_argument(parser)
args = parser.parse_args()
if args.test:
# Don't grab mouse focus during testing.
grab_focus = False
# See: https://stackoverflow.com/a/52528832/7829525
os.environ["SDL_VIDEODRIVER"] = "dummy"
else:
grab_focus = True
builder = DiagramBuilder()
if args.hardware:
station = builder.AddSystem(ManipulationStationHardwareInterface())
station.Connect(wait_for_cameras=False)
else:
station = builder.AddSystem(ManipulationStation())
# Initializes the chosen station type.
if args.setup == 'manipulation_class':
station.SetupManipulationClassStation()
station.AddManipulandFromFile(
("drake/examples/manipulation_station/models/"
"061_foam_brick.sdf"),
RigidTransform(RotationMatrix.Identity(), [0.6, 0, 0]))
elif args.setup == 'clutter_clearing':
station.SetupClutterClearingStation()
ycb_objects = CreateClutterClearingYcbObjectList()
for model_file, X_WObject in ycb_objects:
station.AddManipulandFromFile(model_file, X_WObject)
station.Finalize()
ConnectDrakeVisualizer(builder, station.get_scene_graph(),
station.GetOutputPort("pose_bundle"))
if args.meshcat:
meshcat = builder.AddSystem(
MeshcatVisualizer(station.get_scene_graph(),
zmq_url=args.meshcat))
builder.Connect(station.GetOutputPort("pose_bundle"),
meshcat.get_input_port(0))
robot = station.get_controller_plant()
params = DifferentialInverseKinematicsParameters(robot.num_positions(),
robot.num_velocities())
time_step = 0.005
params.set_timestep(time_step)
# True velocity limits for the IIWA14 (in rad, rounded down to the first
# decimal)
iiwa14_velocity_limits = np.array([1.4, 1.4, 1.7, 1.3, 2.2, 2.3, 2.3])
# Stay within a small fraction of those limits for this teleop demo.
factor = args.velocity_limit_factor
params.set_joint_velocity_limits(
(-factor * iiwa14_velocity_limits, factor * iiwa14_velocity_limits))
differential_ik = builder.AddSystem(
DifferentialIK(robot, robot.GetFrameByName("iiwa_link_7"), params,
time_step))
builder.Connect(differential_ik.GetOutputPort("joint_position_desired"),
station.GetInputPort("iiwa_position"))
teleop = builder.AddSystem(MouseKeyboardTeleop(grab_focus=grab_focus))
filter_ = builder.AddSystem(
FirstOrderLowPassFilter(time_constant=args.filter_time_const, size=6))
builder.Connect(teleop.get_output_port(0), filter_.get_input_port(0))
builder.Connect(filter_.get_output_port(0),
differential_ik.GetInputPort("rpy_xyz_desired"))
builder.Connect(teleop.GetOutputPort("position"),
station.GetInputPort("wsg_position"))
builder.Connect(teleop.GetOutputPort("force_limit"),
station.GetInputPort("wsg_force_limit"))
diagram = builder.Build()
simulator = Simulator(diagram)
# This is important to avoid duplicate publishes to the hardware interface:
simulator.set_publish_every_time_step(False)
station_context = diagram.GetMutableSubsystemContext(
station, simulator.get_mutable_context())
station.GetInputPort("iiwa_feedforward_torque").FixValue(
station_context, np.zeros(7))
simulator.AdvanceTo(1e-6)
q0 = station.GetOutputPort("iiwa_position_measured").Eval(station_context)
differential_ik.parameters.set_nominal_joint_position(q0)
teleop.SetPose(differential_ik.ForwardKinematics(q0))
filter_.set_initial_output_value(
diagram.GetMutableSubsystemContext(filter_,
simulator.get_mutable_context()),
teleop.get_output_port(0).Eval(
diagram.GetMutableSubsystemContext(
teleop, simulator.get_mutable_context())))
differential_ik.SetPositions(
diagram.GetMutableSubsystemContext(differential_ik,
simulator.get_mutable_context()),
q0)
simulator.set_target_realtime_rate(args.target_realtime_rate)
print_instructions()
simulator.AdvanceTo(args.duration)
def main():
parser = argparse.ArgumentParser(description=__doc__)
parser.add_argument(
"--target_realtime_rate", type=float, default=1.0,
help="Desired rate relative to real time. See documentation for "
"Simulator::set_target_realtime_rate() for details.")
parser.add_argument(
"--duration", type=float, default=np.inf,
help="Desired duration of the simulation in seconds.")
parser.add_argument(
"--hardware", action='store_true',
help="Use the ManipulationStationHardwareInterface instead of an "
"in-process simulation.")
parser.add_argument(
"--test", action='store_true',
help="Disable opening the gui window for testing.")
parser.add_argument(
"--time_step", type=float, default=0.005,
help="Time constant for the differential IK solver and first order"
"low pass filter applied to the teleop commands")
parser.add_argument(
"--velocity_limit_factor", type=float, default=1.0,
help="This value, typically between 0 and 1, further limits the "
"iiwa14 joint velocities. It multiplies each of the seven "
"pre-defined joint velocity limits. "
"Note: The pre-defined velocity limits are specified by "
"iiwa14_velocity_limits, found in this python file.")
parser.add_argument(
'--setup', type=str, default='manipulation_class',
help="The manipulation station setup to simulate. ",
choices=['manipulation_class', 'clutter_clearing'])
parser.add_argument(
'--schunk_collision_model', type=str, default='box',
help="The Schunk collision model to use for simulation. ",
choices=['box', 'box_plus_fingertip_spheres'])
MeshcatVisualizer.add_argparse_argument(parser)
args = parser.parse_args()
if args.test:
# Don't grab mouse focus during testing.
# See: https://stackoverflow.com/a/52528832/7829525
os.environ["SDL_VIDEODRIVER"] = "dummy"
builder = DiagramBuilder()
if args.hardware:
station = builder.AddSystem(ManipulationStationHardwareInterface())
station.Connect(wait_for_cameras=False)
else:
station = builder.AddSystem(ManipulationStation())
if args.schunk_collision_model == "box":
schunk_model = SchunkCollisionModel.kBox
elif args.schunk_collision_model == "box_plus_fingertip_spheres":
schunk_model = SchunkCollisionModel.kBoxPlusFingertipSpheres
# Initializes the chosen station type.
if args.setup == 'manipulation_class':
station.SetupManipulationClassStation(
schunk_model=schunk_model)
station.AddManipulandFromFile(
("drake/examples/manipulation_station/models/"
"061_foam_brick.sdf"),
RigidTransform(RotationMatrix.Identity(), [0.6, 0, 0]))
elif args.setup == 'clutter_clearing':
station.SetupClutterClearingStation(
schunk_model=schunk_model)
ycb_objects = CreateClutterClearingYcbObjectList()
for model_file, X_WObject in ycb_objects:
station.AddManipulandFromFile(model_file, X_WObject)
station.Finalize()
DrakeVisualizer.AddToBuilder(builder,
station.GetOutputPort("query_object"))
if args.meshcat:
meshcat = ConnectMeshcatVisualizer(
builder, output_port=station.GetOutputPort("geometry_query"),
zmq_url=args.meshcat, open_browser=args.open_browser)
if args.setup == 'planar':
meshcat.set_planar_viewpoint()
robot = station.get_controller_plant()
params = DifferentialInverseKinematicsParameters(robot.num_positions(),
robot.num_velocities())
params.set_timestep(args.time_step)
# True velocity limits for the IIWA14 (in rad/s, rounded down to the first
# decimal)
iiwa14_velocity_limits = np.array([1.4, 1.4, 1.7, 1.3, 2.2, 2.3, 2.3])
# Stay within a small fraction of those limits for this teleop demo.
factor = args.velocity_limit_factor
params.set_joint_velocity_limits((-factor*iiwa14_velocity_limits,
factor*iiwa14_velocity_limits))
differential_ik = builder.AddSystem(DifferentialIK(
robot, robot.GetFrameByName("iiwa_link_7"), params, args.time_step))
builder.Connect(differential_ik.GetOutputPort("joint_position_desired"),
station.GetInputPort("iiwa_position"))
teleop = builder.AddSystem(DualShock4Teleop(initialize_joystick()))
filter_ = builder.AddSystem(
FirstOrderLowPassFilter(time_constant=args.time_step, size=6))
builder.Connect(teleop.get_output_port(0), filter_.get_input_port(0))
builder.Connect(filter_.get_output_port(0),
differential_ik.GetInputPort("rpy_xyz_desired"))
builder.Connect(teleop.GetOutputPort("position"), station.GetInputPort(
"wsg_position"))
builder.Connect(teleop.GetOutputPort("force_limit"),
station.GetInputPort("wsg_force_limit"))
diagram = builder.Build()
simulator = Simulator(diagram)
# This is important to avoid duplicate publishes to the hardware interface:
simulator.set_publish_every_time_step(False)
station_context = diagram.GetMutableSubsystemContext(
station, simulator.get_mutable_context())
station.GetInputPort("iiwa_feedforward_torque").FixValue(
station_context, np.zeros(7))
# If the diagram is only the hardware interface, then we must advance it a
# little bit so that first LCM messages get processed. A simulated plant is
# already publishing correct positions even without advancing, and indeed
# we must not advance a simulated plant until the sliders and filters have
# been initialized to match the plant.
if args.hardware:
simulator.AdvanceTo(1e-6)
q0 = station.GetOutputPort("iiwa_position_measured").Eval(station_context)
differential_ik.parameters.set_nominal_joint_position(q0)
teleop.SetPose(differential_ik.ForwardKinematics(q0))
filter_.set_initial_output_value(
diagram.GetMutableSubsystemContext(
filter_, simulator.get_mutable_context()),
teleop.get_output_port(0).Eval(diagram.GetMutableSubsystemContext(
teleop, simulator.get_mutable_context())))
differential_ik.SetPositions(diagram.GetMutableSubsystemContext(
differential_ik, simulator.get_mutable_context()), q0)
simulator.set_target_realtime_rate(args.target_realtime_rate)
print_instructions()
simulator.AdvanceTo(args.duration)
robot = station.get_controller_plant()
params = DifferentialInverseKinematicsParameters(robot.num_positions(),
robot.num_velocities())
time_step = 0.005
params.set_timestep(time_step)
# True velocity limits for the IIWA14 (in rad, rounded down to the first
# decimal)
iiwa14_velocity_limits = np.array([1.4, 1.4, 1.7, 1.3, 2.2, 2.3, 2.3])
# Stay within a small fraction of those limits for this teleop demo.
factor = args.velocity_limit_factor
params.set_joint_velocity_limits((-factor*iiwa14_velocity_limits,
factor*iiwa14_velocity_limits))
differential_ik = builder.AddSystem(DifferentialIK(
robot, robot.GetFrameByName("iiwa_link_7"), params, time_step))
builder.Connect(differential_ik.GetOutputPort("joint_position_desired"),
station.GetInputPort("iiwa_position"))
# Don't let mouse grab focus during testing.
grab_focus = not args.test
teleop = builder.AddSystem(MouseKeyboardTeleop(grab_focus=grab_focus))
filter = builder.AddSystem(
FirstOrderLowPassFilter(time_constant=args.filter_time_const, size=6))
builder.Connect(teleop.get_output_port(0), filter.get_input_port(0))
builder.Connect(filter.get_output_port(0),
differential_ik.GetInputPort("rpy_xyz_desired"))
builder.Connect(teleop.GetOutputPort("position"), station.GetInputPort(
