def configure(self, edam):
super().configure(edam)
incdirs = []
sv_files = []
unused_files = []
for f in self.files:
if f.get("file_type").startswith("systemVerilogSource"):
if not self._add_include_dir(f, incdirs):
sv_files.append(f["name"])
else:
unused_files.append(f)
output_file = self.name + ".v"
self.edam = edam.copy()
self.edam["files"] = unused_files
self.edam["files"].append({
"name": output_file,
"file_type": "verilogSource",
})
sv2v_options = self.tool_options.get("sv2v_options", [])
commands = EdaCommands()
commands.add(
["sv2v", "-w", output_file] + sv2v_options +
["-I" + d for d in incdirs] + sv_files,
[output_file],
sv_files,
)
self.commands = commands.commands
def configure(self, edam):
super().configure(edam)
unused_files = []
asc_file = ""
bin_file = ""
for f in self.files:
if f["file_type"] == "iceboxAscii":
if asc_file:
raise RuntimeError(
"Icepack only supports one input file. Found {} and {}".format(
asc_file, f["name"]
)
)
asc_file = f["name"]
else:
unused_files.append(f)
if not asc_file:
raise RuntimeError("No input file specified for icepack")
bin_file = os.path.splitext(asc_file)[0] + ".bin"
self.edam = edam.copy()
self.edam["files"] = unused_files
self.edam["files"].append({"name": bin_file, "file_type": "binary"})
# Image generation
depends = asc_file
targets = bin_file
command = ["icepack", depends, targets]
commands = EdaCommands()
commands.add(command, [targets], [depends])
self.commands = commands.commands
def configure(self, edam):
super().configure(edam)
unused_files = []
asc_file = ""
for f in self.files:
if f["file_type"] == "iceboxAscii":
if asc_file:
raise RuntimeError(
"Icetime only supports one input file. Found {} and {}"
.format(asc_file, f["name"]))
asc_file = f["name"]
else:
unused_files.append(f)
if not asc_file:
raise RuntimeError("No input file specified for icetime")
tim_file = os.path.splitext(asc_file)[0] + ".tim"
self.edam["files"] = unused_files
self.edam["files"].append({"name": tim_file, "file_type": "report"})
# Image generation
depends = asc_file
targets = tim_file
command = ["icetime", "-r", targets] + self.tool_options.get(
"icetime_options", [])
command.append(depends)
commands = EdaCommands()
commands.add(command, [targets], [depends])
commands.add([], ["timing"], [targets])
self.commands = commands.commands
def configure(self, edam):
super().configure(edam)
incdirs = []
file_table = []
unused_files = []
depfiles = []
# Filter out input files
for f in self.files:
src = ""
if "file_type" in f:
file_type = f.get("file_type", "")
if file_type.startswith("verilogSource"):
src = f["name"]
elif file_type.startswith("systemVerilogSource"):
src = "-sv " + f["name"]
if src:
depfiles.append(f["name"])
if not self._add_include_dir(f, incdirs):
file_table.append(src)
else:
unused_files.append(f)
# Create output EDAM
output_file = "slpp_all/surelog.uhdm"
self.edam = edam.copy()
self.edam["files"] = unused_files
self.edam["files"].append({"name": output_file, "file_type": "uhdm"})
# Handle verilog defines
verilog_defines = []
for key, value in self.vlogdefine.items():
verilog_params.append(f"+define+{key}={value}")
# Handle verilog parameters
verilog_params = []
for key, value in self.vlogparam.items():
verilog_params.append(f"-P{key}={value}")
commands = EdaCommands()
commands.add(
["surelog", "-top", self.toplevel] +
self.tool_options.get("surelog_options", []) + ["-parse"] +
verilog_defines + verilog_params + ["-I" + d
for d in incdirs] + file_table,
[output_file],
depfiles,
)
self.commands = commands.commands
def configure_main(self):
# Pass apicula tool options to yosys and nextpnr
self.edam["tool_options"] = {
"yosys": {
"arch": "gowin",
"output_format": "json",
"yosys_synth_options": [f"-json {self.name}.json"]
+ self.tool_options.get("yosys_synth_options", []),
"yosys_as_subtool": True,
"yosys_template": self.tool_options.get("yosys_template"),
},
"nextpnr": {
"device": self.tool_options.get("device"),
"nextpnr_options": self.tool_options.get("nextpnr_options", []),
},
}
yosys = Yosys(self.edam, self.work_root)
yosys.configure()
nextpnr = Nextpnr(yosys.edam, self.work_root)
nextpnr.flow_config = {"arch": "gowin"}
nextpnr.configure()
# Write Makefile
commands = EdaCommands()
commands.commands = yosys.commands
commands.commands += nextpnr.commands
# Image generation
depends = self.name + ".pack"
targets = self.name + ".fs"
command = [
"gowin_pack",
"-d",
self.tool_options.get("device"),
"-o",
targets,
depends,
]
commands.add(command, [targets], [depends])
commands.set_default_target(targets)
commands.write(os.path.join(self.work_root, "Makefile"))
def configure_main(self):
# Pass trellis tool options to yosys and nextpnr
self.edam["tool_options"] = {
"yosys": {
"arch":
"nexus",
"output_format":
"json",
"yosys_synth_options":
self.tool_options.get("yosys_synth_options", []),
"yosys_as_subtool":
True,
"yosys_template":
self.tool_options.get("yosys_template"),
},
"nextpnr": {
"device": self.tool_options.get("device"),
"nextpnr_options":
self.tool_options.get("nextpnr_options", []),
},
}
yosys = Yosys(self.edam, self.work_root)
yosys.configure()
nextpnr = Nextpnr(yosys.edam, self.work_root)
nextpnr.flow_config = {"arch": "nexus"}
nextpnr.configure()
# Write Makefile
commands = EdaCommands()
commands.commands = yosys.commands
commands.commands += nextpnr.commands
# Image generation
depends = self.name + ".fasm"
targets = self.name + ".bit"
command = ["prjoxide", "pack", depends, targets]
commands.add(command, [targets], [depends])
commands.set_default_target(self.name + ".bit")
commands.write(os.path.join(self.work_root, "Makefile"))
def configure_vpr(self):
(src_files, incdirs) = self._get_fileset_files(force_slash=True)
has_vhdl = "vhdlSource" in [x.file_type for x in src_files]
has_vhdl2008 = "vhdlSource-2008" in [x.file_type for x in src_files]
if has_vhdl or has_vhdl2008:
logger.error("VHDL files are not supported in Yosys")
file_list = []
timing_constraints = []
pins_constraints = []
placement_constraints = []
for f in src_files:
if f.file_type in ["verilogSource"]:
file_list.append(f.name)
if f.file_type in ["SDC"]:
timing_constraints.append(f.name)
if f.file_type in ["PCF"]:
pins_constraints.append(f.name)
if f.file_type in ["xdc"]:
placement_constraints.append(f.name)
part = self.tool_options.get("part")
package = self.tool_options.get("package")
vendor = self.tool_options.get("vendor")
if not part:
logger.error('Missing required "part" parameter')
if not package:
logger.error('Missing required "package" parameter')
if vendor == "xilinx":
if "xc7a" in part:
bitstream_device = "artix7"
if "xc7z" in part:
bitstream_device = "zynq7"
if "xc7k" in part:
bitstream_device = "kintex7"
partname = part + package
# a35t are in fact a50t
# leave partname with 35 so we access correct DB
if part == "xc7a35t":
part = "xc7a50t"
device_suffix = "test"
elif vendor == "quicklogic":
partname = package
device_suffix = "wlcsp"
bitstream_device = part + "_" + device_suffix
_vo = self.tool_options.get("vpr_options")
vpr_options = ["--additional_vpr_options", f'"{_vo}"'] if _vo else []
pcf_opts = ["-p"] + pins_constraints if pins_constraints else []
sdc_opts = ["-s"] + timing_constraints if timing_constraints else []
xdc_opts = ["-x"
] + placement_constraints if placement_constraints else []
commands = EdaCommands()
# Synthesis
targets = self.toplevel + ".eblif"
command = ["symbiflow_synth", "-t", self.toplevel]
command += ["-v"] + file_list
command += ["-d", bitstream_device]
command += ["-p" if vendor == "xilinx" else "-P", partname]
command += xdc_opts
commands.add(command, [targets], [])
# P&R
eblif_opt = ["-e", self.toplevel + ".eblif"]
device_opt = ["-d", part + "_" + device_suffix]
depends = self.toplevel + ".eblif"
targets = self.toplevel + ".net"
command = ["symbiflow_pack"
] + eblif_opt + device_opt + sdc_opts + vpr_options
commands.add(command, [targets], [depends])
depends = self.toplevel + ".net"
targets = self.toplevel + ".place"
command = ["symbiflow_place"] + eblif_opt + device_opt
command += ["-n", depends, "-P", partname]
command += sdc_opts + pcf_opts + vpr_options
commands.add(command, [targets], [depends])
depends = self.toplevel + ".place"
targets = self.toplevel + ".route"
command = ["symbiflow_route"] + eblif_opt + device_opt
command += sdc_opts + vpr_options
commands.add(command, [targets], [depends])
depends = self.toplevel + ".route"
targets = self.toplevel + ".fasm"
command = ["symbiflow_write_fasm"] + eblif_opt + device_opt
command += sdc_opts + vpr_options
commands.add(command, [targets], [depends])
depends = self.toplevel + ".fasm"
targets = self.toplevel + ".bit"
command = ["symbiflow_write_bitstream"] + ["-d", bitstream_device]
command += ["-f", depends]
command += ["-p" if vendor == "xilinx" else "-P", partname]
command += ["-b", targets]
commands.add(command, [targets], [depends])
commands.set_default_target(targets)
commands.write(os.path.join(self.work_root, "Makefile"))
def configure_nextpnr(self):
(src_files, incdirs) = self._get_fileset_files(force_slash=True)
vendor = self.tool_options.get("vendor")
# Yosys configuration
yosys_synth_options = self.tool_options.get("yosys_synth_options", "")
yosys_template = self.tool_options.get("yosys_template")
yosys_edam = {
"files": self.files,
"name": self.name,
"toplevel": self.toplevel,
"parameters": self.parameters,
"tool_options": {
"yosys": {
"arch": vendor,
"output_format": "json",
"yosys_synth_options": yosys_synth_options,
"yosys_template": yosys_template,
"yosys_as_subtool": True,
}
},
}
yosys = getattr(import_module("edalize.yosys"),
"Yosys")(yosys_edam, self.work_root)
yosys.configure()
# Nextpnr configuration
arch = self.tool_options.get("arch")
if arch not in self.archs:
logger.error(
'Missing or invalid "arch" parameter: {} in "tool_options"'.
format(arch))
package = self.tool_options.get("package")
if not package:
logger.error('Missing required "package" parameter')
part = self.tool_options.get("part")
if not part:
logger.error('Missing required "part" parameter')
target_family = None
for family in getattr(self, "fpga_interchange_families"):
if family in part:
target_family = family
break
if target_family is None and arch == "fpga_interchange":
logger.error(
"Couldn't find family for part: {}. Available families: {}".
format(part,
", ".join(getattr(self, "fpga_interchange_families"))))
chipdb = None
device = None
placement_constraints = []
for f in src_files:
if f.file_type in ["bba"]:
chipdb = f.name
elif f.file_type in ["device"]:
device = f.name
elif f.file_type in ["xdc"]:
placement_constraints.append(f.name)
else:
continue
if not chipdb:
logger.error("Missing required chipdb file")
if placement_constraints == []:
logger.error("Missing required XDC file(s)")
if device is None and arch == "fpga_interchange":
logger.error(
'Missing required ".device" file for "fpga_interchange" arch')
nextpnr_options = self.tool_options.get("nextpnr_options", "")
partname = part + package
# Strip speedgrade string when using fpga_interchange
package = package.split("-")[0] if arch == "fpga_interchange" else None
if "xc7a" in part:
bitstream_device = "artix7"
if "xc7z" in part:
bitstream_device = "zynq7"
if "xc7k" in part:
bitstream_device = "kintex7"
depends = self.name + ".json"
xdcs = []
for x in placement_constraints:
xdcs += ["--xdc", x]
commands = EdaCommands()
commands.commands = yosys.commands
if arch == "fpga_interchange":
commands.header += """ifndef INTERCHANGE_SCHEMA_PATH
$(error Environment variable INTERCHANGE_SCHEMA_PATH was not found. It should be set to <fpga-interchange-schema path>/interchange)
endif
"""
targets = self.name + ".netlist"
command = ["python", "-m", "fpga_interchange.yosys_json"]
command += ["--schema_dir", "$(INTERCHANGE_SCHEMA_PATH)"]
command += ["--device", device]
command += ["--top", self.toplevel]
command += [depends, targets]
commands.add(command, [targets], [depends])
depends = self.name + ".netlist"
targets = self.name + ".phys"
command = ["nextpnr-" + arch, "--chipdb", chipdb]
command += ["--package", package]
command += xdcs
command += ["--netlist", depends]
command += ["--write", self.name + ".routed.json"]
command += ["--phys", targets]
command += [nextpnr_options]
commands.add(command, [targets], [depends])
depends = self.name + ".phys"
targets = self.name + ".fasm"
command = ["python", "-m", "fpga_interchange.fasm_generator"]
command += ["--schema_dir", "$(INTERCHANGE_SCHEMA_PATH)"]
command += [
"--family",
family,
device,
self.name + ".netlist",
depends,
targets,
]
commands.add(command, [targets], [depends])
else:
targets = self.name + ".fasm"
command = ["nextpnr-" + arch, "--chipdb", chipdb]
command += xdcs
command += ["--json", depends]
command += ["--write", self.name + ".routed.json"]
command += ["--fasm", targets]
command += ["--log", "nextpnr.log"]
command += [nextpnr_options]
commands.add(command, [targets], [depends])
depends = self.name + ".fasm"
targets = self.name + ".bit"
command = ["symbiflow_write_bitstream", "-d", bitstream_device]
command += ["-f", depends, "-p", partname, "-b", targets]
commands.add(command, [targets], [depends])
commands.set_default_target(targets)
commands.write(os.path.join(self.work_root, "Makefile"))
def configure(self, edam):
super().configure(edam)
cst_file = ""
lpf_file = ""
pcf_file = ""
netlist = ""
unused_files = []
for f in self.files:
file_type = f.get("file_type", "")
if file_type == "CST":
if cst_file:
raise RuntimeError(
"Nextpnr only supports one CST file. Found {} and {}".
format(cst_file, f["name"]))
cst_file = f["name"]
if file_type == "LPF":
if lpf_file:
raise RuntimeError(
"Nextpnr only supports one LPF file. Found {} and {}".
format(pcf_file, f["name"]))
lpf_file = f["name"]
if file_type == "PCF":
if pcf_file:
raise RuntimeError(
"Nextpnr only supports one PCF file. Found {} and {}".
format(pcf_file, f["name"]))
pcf_file = f["name"]
elif file_type == "jsonNetlist":
if netlist:
raise RuntimeError(
"Nextpnr only supports one netlist. Found {} and {}".
format(netlist, f["name"]))
netlist = f["name"]
else:
unused_files.append(f)
self.edam = edam.copy()
self.edam["files"] = unused_files
of = [
{
"name": self.name + ".asc",
"file_type": "iceboxAscii"
},
]
self.edam["files"] += of
# Write Makefile
commands = EdaCommands()
arch = self.tool_options["arch"]
arch_options = []
if arch == "ecp5":
targets = self.name + ".config"
constraints = ["--lpf", lpf_file] if lpf_file else []
output = ["--textcfg", targets]
elif arch == "gowin":
device = self.tool_options.get("device")
if not device:
raise RuntimeError(
"Missing required option 'device' for nextpnr-gowin")
arch_options += ["--device", device]
targets = self.name + ".pack"
constraints = ["--cst", cst_file] if cst_file else []
output = ["--write", targets]
else:
targets = self.name + ".asc"
constraints = ["--pcf", pcf_file] if pcf_file else []
output = ["--asc", targets]
depends = netlist
command = ["nextpnr-" + arch, "-l", "next.log"]
command += arch_options + self.tool_options.get("nextpnr_options", [])
command += constraints + ["--json", depends] + output
# CLI target
commands.add(command, [targets], [depends])
# GUI target
commands.add(command + ["--gui"], ["build-gui"], [depends])
self.commands = commands.commands
def configure_main(self):
(src_files, incdirs) = self._get_fileset_files()
synth_out = self.name + "_synth.v"
device = self.tool_options.get("device")
if not device:
raise RuntimeError("Missing required option 'device' for p_r")
match = re.search("^CCGM1A([1-9]{1,2})$", device)
if not match:
raise RuntimeError("{} is not known device name".format(device))
device_number = match.groups()[0]
if device_number not in ["1", "2", "4", "9", "16", "25"]:
raise RuntimeError(
"Rel. size {} is not unsupported".format(device_number))
ccf_file = None
for f in src_files:
if f.file_type == "CCF":
if ccf_file:
raise RuntimeError(
"p_r only supports one ccf file. Found {} and {}".
format(ccf_file, f.name))
else:
ccf_file = f.name
# Pass trellis tool options to yosys
self.edam["tool_options"] = {
"yosys": {
"arch":
"gatemate",
"output_format":
"verilog",
"output_name":
synth_out,
"yosys_synth_options":
self.tool_options.get("yosys_synth_options", []),
"yosys_as_subtool":
True,
"yosys_template":
self.tool_options.get("yosys_template"),
},
}
yosys = Yosys(self.edam, self.work_root)
yosys.configure()
# Write Makefile
commands = EdaCommands()
commands.commands = yosys.commands
# PnR & image generation
targets = self.name + "_00.cfg.bit"
command = [
"p_r",
"-A",
device_number,
"-i",
synth_out,
"-o",
self.name,
"-lib",
"ccag",
" ".join(self.tool_options.get("p_r_options", "")),
]
if ccf_file is not None:
command += ["-ccf", ccf_file]
commands.add(command, [targets], [synth_out])
commands.set_default_target(targets)
commands.write(os.path.join(self.work_root, "Makefile"))
def configure(self, edam):
"""
Configuration is the first phase of the build.
This writes the project TCL files and Makefile. It first collects all
sources, IPs and constraints and then writes them to the TCL file along
with the build steps.
"""
super().configure(edam)
src_files = []
incdirs = []
edif_files = []
has_vhdl2008 = False
has_xci = False
unused_files = []
bd_files = []
for f in self.files:
cmd = ""
if f["file_type"].startswith("verilogSource"):
cmd = "read_verilog"
elif f["file_type"].startswith("systemVerilogSource"):
cmd = "read_verilog -sv"
elif f["file_type"] == "tclSource":
cmd = "source"
elif f["file_type"] == "edif":
cmd = "read_edif"
edif_files.append(f["name"])
elif f["file_type"].startswith("vhdlSource"):
cmd = "read_vhdl"
if f["file_type"] == "vhdlSource-2008":
has_vhdl2008 = True
cmd += " -vhdl2008"
if f.get("logical_name"):
cmd += " -library " + f["logical_name"]
elif f["file_type"] == "xci":
cmd = "read_ip"
has_xci = True
elif f["file_type"] == "xdc":
cmd = "read_xdc"
elif f["file_type"] == "SDC":
cmd = "read_xdc -unmanaged"
elif f["file_type"] == "mem":
cmd = "read_mem"
elif f["file_type"] == "bd":
cmd = "read_bd"
bd_files.append(f["name"])
if cmd:
if not self._add_include_dir(f, incdirs):
src_files.append(cmd + " {" + f["name"] + "}")
else:
unused_files.append(f)
template_vars = {
"name": self.name,
"src_files": "\n".join(src_files),
"incdirs": incdirs + ["."],
"tool_options": self.tool_options,
"toplevel": self.toplevel,
"vlogparam": self.vlogparam,
"vlogdefine": self.vlogdefine,
"generic": self.generic,
"netlist_flow": bool(edif_files),
"has_vhdl2008": has_vhdl2008,
"has_xci": has_xci,
"bd_files": bd_files,
}
self.render_template("vivado-project.tcl.j2", self.name + ".tcl",
template_vars)
jobs = self.tool_options.get("jobs", None)
run_template_vars = {
"jobs": " -jobs " + str(jobs) if jobs is not None else ""
}
self.render_template("vivado-run.tcl.j2", self.name + "_run.tcl",
run_template_vars)
synth_template_vars = {
"jobs": " -jobs " + str(jobs) if jobs is not None else ""
}
self.render_template("vivado-synth.tcl.j2", self.name + "_synth.tcl",
synth_template_vars)
# Write Makefile
commands = EdaCommands()
vivado_command = ["vivado", "-notrace", "-mode", "batch", "-source"]
# Create project file
project_file = self.name + ".xpr"
tcl_file = [self.name + ".tcl"]
commands.add(vivado_command + tcl_file, [project_file],
tcl_file + edif_files)
synth = self.tool_options.get("synth", "vivado")
if synth == "vivado":
depends = [f"{self.name}_synth.tcl", project_file]
targets = [f"{self.name}.runs/synth_1/__synthesis_is_complete__"]
commands.add(vivado_command + depends, targets, depends)
else:
targets = edif_files
commands.add([], ["synth"], targets)
# Bitstream generation
run_tcl = self.name + "_run.tcl"
depends = [run_tcl, project_file]
bitstream = self.name + ".bit"
commands.add(vivado_command + depends, [bitstream], depends)
commands.add(["vivado", project_file], ["build-gui"], [project_file])
depends = [self.name + "_pgm.tcl", bitstream]
command = [
"vivado",
"-quiet",
"-nolog",
"-notrace",
"-mode",
"batch",
"-source",
f"{self.name}_pgm.tcl",
"-tclargs",
]
part = self.tool_options.get("part", "")
command += [part] if part else []
command += [bitstream]
commands.add(command, ["pgm"], depends)
commands.set_default_target(bitstream)
commands.write(os.path.join(self.work_root, "Makefile"))
self.commands = commands.commands
self.render_template("vivado-program.tcl.j2", self.name + "_pgm.tcl")
def configure_main(self):
# write Yosys tcl script file
yosys_template = self.tool_options.get("yosys_template")
incdirs = []
file_table = []
unused_files = []
for f in self.files:
cmd = ""
if f["file_type"].startswith("verilogSource"):
cmd = "read_verilog"
elif f["file_type"].startswith("systemVerilogSource"):
cmd = "read_verilog -sv"
elif f["file_type"] == "tclSource":
cmd = "source"
if cmd:
if not self._add_include_dir(f, incdirs):
file_table.append(cmd + " {" + f["name"] + "}")
else:
unused_files.append(f)
self.edam["files"] = unused_files
output_format = self.tool_options.get("output_format", "blif")
default_target = f"{self.name}.{output_format}"
self.edam["files"].append({
"name":
default_target,
"file_type":
"jsonNetlist" if output_format == "json" else output_format,
})
verilog_defines = []
for key, value in self.vlogdefine.items():
verilog_defines.append("{{{key} {value}}}".format(key=key,
value=value))
verilog_params = []
for key, value in self.vlogparam.items():
if type(value) is str:
value = '{"' + value + '"}'
_s = r"chparam -set {} {} {}"
verilog_params.append(
_s.format(key, self._param_value_str(value), self.toplevel))
arch = self.tool_options.get("arch", None)
if not arch:
logger.error("ERROR: arch is not defined.")
template = yosys_template or "edalize_yosys_template.tcl"
template_vars = {
"verilog_defines":
"{" + " ".join(verilog_defines) + "}",
"verilog_params":
"\n".join(verilog_params),
"file_table":
"\n".join(file_table),
"incdirs":
" ".join(["-I" + d for d in incdirs]),
"top":
self.toplevel,
"synth_command":
"synth_" + arch,
"synth_options":
" ".join(self.tool_options.get("yosys_synth_options", "")),
"write_command":
"write_" + output_format,
"output_format":
output_format,
"output_opts":
"-pvector bra " if arch == "xilinx" else "",
"yosys_template":
template,
"name":
self.name,
}
self.render_template("edalize_yosys_procs.tcl.j2",
"edalize_yosys_procs.tcl", template_vars)
if not yosys_template:
self.render_template("yosys-script-tcl.j2",
"edalize_yosys_template.tcl", template_vars)
commands = EdaCommands()
commands.add(
["yosys", "-l", "yosys.log", "-p", f"'tcl {template}'"],
[default_target],
[template],
)
if self.tool_options.get("yosys_as_subtool"):
self.commands = commands.commands
else:
commands.set_default_target(f"{self.name}.{output_format}")
commands.write(os.path.join(self.work_root, "Makefile"))
def configure(self, edam):
super().configure(edam)
analyze_options = self.tool_options.get("analyze_options", [])
# Check of std=xx analyze option, this overyides the dynamic determination of vhdl standard
import re
rx = re.compile("^--std=([0-9]+)")
m = None
for o in analyze_options:
m = rx.match(o)
if m:
stdarg = [m.group()]
analyze_options.remove(o)
break
if m:
logger.warning(
"Analyze option "
+ m.group()
+ " given, will override any vhdlSource-xxxx specification\n"
)
standard = m.group(1)
else:
# ghdl does not support mixing incompatible versions
# specifying 93c as std should allow 87 syntax
# 2008 can't be combined so try to parse everthing with 08 std
has87 = has93 = has08 = False
for f in self.files:
if f["file_type"] == "vhdlSource-87":
has87 = True
elif f["file_type"] == "vhdlSource-93":
has93 = True
elif f["file_type"] == "vhdlSource-2008":
has08 = True
stdarg = []
if has08:
if has87 or has93:
logger.warning(
"ghdl can't mix vhdlSource-2008 with other standard version\n"
+ "Trying with treating all as vhdlSource-2008"
)
stdarg = ["--std=08"]
elif has87 and has93:
stdarg = ["--std=93c"]
elif has87:
stdarg = ["--std=87"]
elif has93:
stdarg = ["--std=93"]
else:
stdarg = ["--std=93c"]
standard = rx.match(stdarg[0]).group(1)
run_options = self.tool_options.get("run_options", [])
analyze_options = " ".join(analyze_options)
_vhdltypes = ("vhdlSource", "vhdlSource-87", "vhdlSource-93", "vhdlSource-2008")
libraries = {}
library_options = "--work={lib} --workdir=./{lib}"
ghdlimport = ""
vhdl_sources = ""
# GHDL versions older than 849a25e0 don't support the dot notation (e.g.
# my_lib.top_design) for the top level.
# Nonetheless, we unconditionally split the library and the primary unit,
# if the user specified the top level using the dot notation.
top = self.toplevel.split(".")
if len(top) > 2:
logger.error("Invalid dot notation in toplevel: {}".format(self.toplevel))
top_libraries = ""
if len(top) > 1:
libraries[top[0]] = []
top_libraries = library_options.format(lib=top[0])
top_unit = top[-1]
unused_files = []
for f in self.files:
if f["file_type"] in _vhdltypes:
# Files without a specified library will by added to
# libraries[None] which is perhaps poor form but avoids
# conflicts with user generated names
libraries[f["logical_name"]] = libraries.get(f["logical_name"], []) + [
f["name"]
]
vhdl_sources += " {file}".format(file=f["name"])
depfiles.append(f)
else:
unused_files.append(f)
self.edam = edam.copy()
self.edam["files"] = unused_files
ghdlimport = ""
make_libraries_directories = ""
for lib, files in libraries.items():
lib_opts = ""
if lib:
analyze_options += " -P./{}".format(lib)
make_libraries_directories += "\tmkdir -p {}\n".format(lib)
lib_opts = library_options.format(lib=lib)
ghdlimport += "\tghdl -i $(STD) $(ANALYZE_OPTIONS) {} {}\n".format(
lib_opts, " ".join(files)
)
commands = EdaCommands()
if self.tool_options.get("mode") == "verilog":
commands.add(
["ghdl", "-a"] + stdarg + analyze_options + [top_libraries, top_unit],
# FIXME: Get names of object files here
[f"work-obj{stdarg[0]}.cf"],
depfiles,
)
def configure(self, edam):
super().configure(edam)
# Future improvement: Separate include directories of c and verilog files
incdirs = set()
verilator_file = self.name + ".vc"
vc = []
vc.append("--Mdir .")
modes = ["sc", "cc", "lint-only"]
# Default to cc mode if not specified
mode = self.tool_options.get("mode", "cc")
if not mode in modes:
_s = "Illegal verilator mode {}. Allowed values are {}"
raise RuntimeError(_s.format(mode, ", ".join(modes)))
vc.append("--" + mode)
vc += self.tool_options.get("verilator_options", [])
for include_dir in incdirs:
vc.append(f"+incdir+" + include_dir)
vc.append("-CFLAGS -I" + include_dir)
vlt_files = []
vlog_files = []
opt_c_files = []
uhdm_files = []
unused_files = []
depfiles = []
for f in self.files:
file_type = f.get("file_type", "")
depfile = True
if file_type.startswith("systemVerilogSource"
) or file_type.startswith("verilogSource"):
if not self._add_include_dir(f, incdirs):
vlog_files.append(f["name"])
elif file_type in ["cppSource", "systemCSource", "cSource"]:
if not self._add_include_dir(f, incdirs):
opt_c_files.append(f["name"])
elif file_type == "vlt":
vlt_files.append(f["name"])
elif file_type == "uhdm":
uhdm_files.append(f["name"])
else:
unused_files.append(f)
depfile = False
if depfile:
depfiles.append(f["name"])
# Add created exe/.so/.a to EDAM output files?
self.edam = edam.copy()
self.edam["files"] = unused_files
if uhdm_files:
vc.append("--uhdm-ast-sv")
vc += vlt_files + uhdm_files + vlog_files
vc.append(f"--top-module {self.toplevel}\n")
if str(self.tool_options.get("exe")).lower() != "false":
vc.append("--exe")
vc += opt_c_files
for k, v in self.vlogparam.items():
vc.append("-G{}={}".format(
k, self._param_value_str(v, str_quote_style='\\"')))
for k, v in self.vlogdefine.items():
vc.append("-D{}={}\n".format(k, self._param_value_str(v)))
with open(os.path.join(self.work_root, verilator_file), "w") as ffile:
ffile.write("\n".join(vc) + "\n")
mk_file = f"V{self.toplevel}.mk"
exe_file = f"V{self.toplevel}"
commands = EdaCommands()
commands.add(
["verilator", "-f", verilator_file],
[mk_file],
depfiles,
)
if mode == "lint-only":
self.default_target = mk_file
else:
commands.add(
["make", "-f", mk_file] +
self.tool_options.get("make_options", []),
[exe_file],
[mk_file],
)
self.default_target = exe_file
self.commands = commands.commands
class Edaflow(object):
@classmethod
def get_flow_options(cls):
flow_opts = cls.FLOW_OPTIONS.copy()
for tool in cls.FLOW:
(tool_name, next_nodes, flow_defined_tool_options) = tool
# Get available tool options from each tool in the flow
class_tool_options = getattr(
import_module(f"edalize.tools.{tool_name}"),
tool_name.capitalize()).get_tool_options()
for opt_name in class_tool_options:
# Filter out tool options that are already set by the flow
if not opt_name in flow_defined_tool_options:
flow_opts[opt_name] = class_tool_options[opt_name]
flow_opts[opt_name]["tool"] = tool_name
return flow_opts
def extract_flow_options(self):
# Extract flow options from the EDAM
flow_options = {}
available_flow_options = [
k for k, v in self.get_flow_options().items() if not v.get("tool")
]
edam_flow_opts = self.edam.get("flow_options", {})
for opt_name in list(edam_flow_opts.keys()):
if opt_name in available_flow_options: # self.get_flow_options():
flow_options[opt_name] = edam_flow_opts.pop(opt_name)
return flow_options
# Filter out tool options for each tool from self.flow_options
def extract_tool_options(self):
tool_options = {}
edam_flow_opts = self.edam.get("flow_options", {})
for (tool_name, next_nodes, flow_defined_tool_options) in self.FLOW:
# Get the tool class
ToolClass = getattr(import_module(f"edalize.tools.{tool_name}"),
tool_name.capitalize())
# Inject the flow-defined tool options to the EDAM
tool_options[tool_name] = merge_dict(
flow_defined_tool_options, tool_options.get(tool_name, {}))
# Assign the EDAM-defined tool options to the right tool
for opt_name in list(edam_flow_opts.keys()):
if opt_name in ToolClass.get_tool_options():
tool_options[tool_name] = merge_dict(
tool_options[tool_name],
{opt_name: edam_flow_opts.pop(opt_name)},
)
self.edam["tool_options"] = tool_options
def build_tool_graph(self):
# Instantiate the tools
nodes = {}
for (tool_name, next_nodes, flow_defined_tool_options) in self.FLOW:
# Instantiate the tool class
tool_inst = getattr(import_module(f"edalize.tools.{tool_name}"),
tool_name.capitalize())()
# FIXME: Don't like injecting stuff like this
tool_inst.next_nodes = next_nodes
tool_inst.work_root = self.work_root
nodes[tool_name] = tool_inst
for name, node in nodes.items():
for next_node in node.next_nodes:
# Add backwards references
nodes[next_node].prev_nodes.add(node)
return nodes
def configure_tools(self, nodes):
def merge_edam(a, b):
# Yeah, I know. It's just a temporary hack
return b
unconfigured_nodes = list(nodes.values())
while unconfigured_nodes:
node = unconfigured_nodes.pop(0)
input_edam = {}
# Check all dependencies are fulfilled
all_deps_configured = True
for n in node.prev_nodes:
if n.edam:
input_edam = merge_edam(input_edam, n.edam)
else:
all_deps_configured = False
if all_deps_configured:
# No input_edam means this is an input to the flow that should
# receive the external EDAM.
if not input_edam:
input_edam = self.edam
node.configure(input_edam)
# This is an input node. Inject dependency on pre_build scripts
if not node.prev_nodes:
# Inject pre-build scripts before the first command
# that the node executes. Note that this isn't
# technically correct since the first command in
# the list might not be the first command executed
node.commands[0].order_only_deps = ["pre_build"]
self.commands.commands += node.commands
def add_scripts(self, depends, hook_name):
last_script = depends
for script in self.hooks.get(hook_name, []):
# _env = self.env.copy()
# if 'env' in script:
# _env.update(script['env'])
targets = script["name"]
command = script["cmd"]
# FIXME : Add env vars
self.commands.add(command, [targets], [last_script])
last_script = script["name"]
self.commands.add([], [hook_name], [last_script])
def __init__(self, edam, work_root, verbose=False):
self.edam = edam
self.hooks = edam.get("hooks", {})
# Extract all options that affects the flow rather than
# just a single tool
self.flow_options = self.extract_flow_options()
# Rearrange tool_options so that each tool gets their
# own tool_options
self.extract_tool_options()
self.work_root = work_root
self.stdout = None
self.stderr = None
self.commands = EdaCommands()
def set_run_command(self):
self.commands.add([], ["run"], ["pre_run"])
def configure(self):
# Add pre build hooks
self.add_scripts("", "pre_build")
# Instantiate all tools (nodes) and build a DAG of the flow
nodes = self.build_tool_graph()
# Configure the individual tools in the graph
self.configure_tools(nodes)
# Add post_build scripts to the end of the build chain
self.add_scripts(self.commands.default_target, "post_build")
self.commands.set_default_target("post_build")
# Add commands to be executed during the run phase
self.add_scripts("", "pre_run")
self.set_run_command()
self.add_scripts("run", "post_run")
# Write out execution file
self.commands.write(os.path.join(self.work_root, "Makefile"))
def _run_tool(self, cmd, args=[], cwd=None, quiet=False):
logger.debug("Running " + cmd)
logger.debug("args : " + " ".join(args))
capture_output = quiet and not (self.verbose or self.stdout
or self.stderr)
try:
cp = run(
[cmd] + args,
cwd=cwd,
stdin=subprocess.PIPE,
stdout=self.stdout,
stderr=self.stderr,
capture_output=capture_output,
check=True,
)
except FileNotFoundError:
_s = "Command '{}' not found. Make sure it is in $PATH".format(cmd)
raise RuntimeError(_s)
except subprocess.CalledProcessError as e:
_s = "'{}' exited with an error: {}".format(e.cmd, e.returncode)
logger.debug(_s)
if e.stdout:
logger.info(e.stdout.decode())
if e.stderr:
logger.error(e.stderr.decode())
logger.debug("=== STDERR ===")
logger.debug(e.stderr)
raise RuntimeError(_s)
return cp.returncode, cp.stdout, cp.stderr
def build(self):
# FIXME: Get run command (e.g. make, ninja, cloud thingie..) from self.commands
self._run_tool("make", cwd=self.work_root)
# Most flows won't have a run phase
def run(self, args):
pass
def configure(self, edam):
"""
Configuration is the first phase of the build.
This writes the project TCL files and Makefile. It first collects all
sources, IPs and constraints and then writes them to the TCL file along
with the build steps.
"""
super().configure(edam)
src_files = []
incdirs = set()
file_netlist = []
timing_constraints = []
for f in src_files:
if f.file_type in ["blif", "eblif"]:
file_netlist.append(f.name)
if f.file_type in ["SDC"]:
timing_constraints.append(f.name)
arch_xml = self.tool_options.get("arch_xml")
if not arch_xml:
logger.error('Missing required "arch" parameter')
_vo = self.tool_options.get("vpr_options")
vpr_options = _vo if _vo else []
sdc_opts = ["--sdc_file"
] + timing_constraints if timing_constraints else []
commands = EdaCommands()
depends = self.name + ".blif"
targets = self.name + ".net"
command = ["vpr", arch_xml, self.name + ".blif", "--pack"]
command += sdc_opts + vpr_options
commands.add(command, [targets], [depends])
depends = self.name + ".net"
targets = self.name + ".place"
command = ["vpr", arch_xml, self.name + ".blif", "--place"]
command += sdc_opts + vpr_options
commands.add(command, [targets], [depends])
depends = self.name + ".place"
targets = self.name + ".route"
command = ["vpr", arch_xml, self.name + ".blif", "--route"]
command += sdc_opts + vpr_options
commands.add(command, [targets], [depends])
depends = self.name + ".route"
targets = self.name + ".analysis"
command = ["vpr", arch_xml, self.name + ".blif", "--analysis"]
command += sdc_opts + vpr_options
commands.add(command, [targets], [depends])
for ext in [".net", ".place", ".route", ".analysis"]:
self.edam["files"].append({
"name": self.name + str(ext),
"file_type": "vpr_" + str(ext[1:])
})
self.commands = commands.commands
commands.set_default_target(targets)
commands.write(os.path.join(self.work_root, "Makefile"))