def to_code(config):
power_supply = None
if CONF_POWER_SUPPLY in config:
for power_supply in get_variable(config[CONF_POWER_SUPPLY]):
yield
for pca9685 in get_variable(config[CONF_PCA9685_ID]):
yield
rhs = pca9685.create_channel(config[CONF_CHANNEL], power_supply)
out = Pvariable(config[CONF_ID], rhs)
output.setup_output_platform(out, config, skip_power_supply=True)
def to_code(config):
for red in get_variable(config[CONF_RED]):
yield
for green in get_variable(config[CONF_GREEN]):
yield
for blue in get_variable(config[CONF_BLUE]):
yield
rhs = App.make_rgb_light(config[CONF_NAME], red, green, blue)
light_struct = variable(config[CONF_MAKE_ID], rhs)
light.setup_light(light_struct.Pstate, light_struct.Pmqtt, config)
setup_component(light_struct.Pstate, config)
def to_code(config):
power_supply = None
if CONF_POWER_SUPPLY in config:
for power_supply in get_variable(config[CONF_POWER_SUPPLY]):
yield
my9231 = None
for my9231 in get_variable(config[CONF_MY9231_ID]):
yield
rhs = my9231.create_channel(config[CONF_CHANNEL], power_supply)
out = Pvariable(config[CONF_ID], rhs)
output.setup_output_platform(out, config, skip_power_supply=True)
setup_component(out, config)
def to_code(config):
for cold_white in get_variable(config[CONF_COLD_WHITE]):
yield
for warm_white in get_variable(config[CONF_WARM_WHITE]):
yield
rhs = App.make_cwww_light(config[CONF_NAME],
config[CONF_COLD_WHITE_COLOR_TEMPERATURE],
config[CONF_WARM_WHITE_COLOR_TEMPERATURE],
cold_white, warm_white)
light_struct = variable(config[CONF_MAKE_ID], rhs)
light.setup_light(light_struct.Pstate, light_struct.Pmqtt, config)
setup_component(light_struct.Pstate, config)
def to_code(config):
for output_ in get_variable(config[CONF_OUTPUT]):
yield
rhs = App.make_fan(config[CONF_NAME])
fan_struct = variable(config[CONF_MAKE_ID], rhs)
add(fan_struct.Poutput.set_binary(output_))
if CONF_OSCILLATION_OUTPUT in config:
for oscillation_output in get_variable(config[CONF_OSCILLATION_OUTPUT]):
yield
add(fan_struct.Poutput.set_oscillation(oscillation_output))
fan.setup_fan(fan_struct.Pstate, fan_struct.Pmqtt, config)
setup_component(fan_struct.Poutput, config)
def to_code(config):
for hub in get_variable(config[CONF_ESP32_BLE_ID]):
yield
rhs = hub.make_xiaomi_device(make_address_array(config[CONF_MAC_ADDRESS]))
dev = Pvariable(config[CONF_ID], rhs)
if CONF_TEMPERATURE in config:
conf = config[CONF_TEMPERATURE]
sensor.register_sensor(dev.Pmake_temperature_sensor(conf[CONF_NAME]),
conf)
if CONF_MOISTURE in config:
conf = config[CONF_MOISTURE]
sensor.register_sensor(dev.Pmake_moisture_sensor(conf[CONF_NAME]),
conf)
if CONF_ILLUMINANCE in config:
conf = config[CONF_ILLUMINANCE]
sensor.register_sensor(dev.Pmake_illuminance_sensor(conf[CONF_NAME]),
conf)
if CONF_CONDUCTIVITY in config:
conf = config[CONF_CONDUCTIVITY]
sensor.register_sensor(dev.Pmake_conductivity_sensor(conf[CONF_NAME]),
conf)
if CONF_BATTERY_LEVEL in config:
conf = config[CONF_BATTERY_LEVEL]
sensor.register_sensor(dev.Pmake_battery_level_sensor(conf[CONF_NAME]),
conf)
def to_code(config):
for output_ in get_variable(config[CONF_OUTPUT]):
yield
rhs = App.make_monochromatic_light(config[CONF_NAME], output_)
light_struct = variable(config[CONF_MAKE_ID], rhs)
light.setup_light(light_struct.Pstate, light_struct.Pmqtt, config)
setup_component(light_struct.Pstate, config)
def to_code(config):
for uart_ in get_variable(config[CONF_UART_ID]):
yield
rhs = App.make_pmsx003(uart_, PMSX003_TYPES[config[CONF_TYPE]])
pms = Pvariable(config[CONF_ID], rhs)
if CONF_PM_1_0 in config:
conf = config[CONF_PM_1_0]
sensor.register_sensor(pms.make_pm_1_0_sensor(conf[CONF_NAME]), conf)
if CONF_PM_2_5 in config:
conf = config[CONF_PM_2_5]
sensor.register_sensor(pms.make_pm_2_5_sensor(conf[CONF_NAME]), conf)
if CONF_PM_10_0 in config:
conf = config[CONF_PM_10_0]
sensor.register_sensor(pms.make_pm_10_0_sensor(conf[CONF_NAME]), conf)
if CONF_TEMPERATURE in config:
conf = config[CONF_TEMPERATURE]
sensor.register_sensor(pms.make_temperature_sensor(conf[CONF_NAME]),
conf)
if CONF_HUMIDITY in config:
conf = config[CONF_HUMIDITY]
sensor.register_sensor(pms.make_humidity_sensor(conf[CONF_NAME]), conf)
if CONF_FORMALDEHYDE in config:
conf = config[CONF_FORMALDEHYDE]
sensor.register_sensor(pms.make_formaldehyde_sensor(conf[CONF_NAME]),
conf)
setup_component(pms, config)
def to_code(config):
hub = None
for hub in get_variable(config[CONF_ESP32_BLE_ID]):
yield
rhs = hub.make_presence_sensor(
config[CONF_NAME], make_address_array(config[CONF_MAC_ADDRESS]))
binary_sensor.register_binary_sensor(rhs, config)
def to_code(config):
for spi_ in get_variable(config[CONF_SPI_ID]):
yield
for cs in gpio_output_pin_expression(config[CONF_CS_PIN]):
yield
for dc in gpio_output_pin_expression(config[CONF_DC_PIN]):
yield
rhs = App.make_spi_ssd1306(spi_, cs, dc)
ssd = Pvariable(config[CONF_ID], rhs)
add(ssd.set_model(MODELS[config[CONF_MODEL]]))
if CONF_RESET_PIN in config:
for reset in gpio_output_pin_expression(config[CONF_RESET_PIN]):
yield
add(ssd.set_reset_pin(reset))
if CONF_EXTERNAL_VCC in config:
add(ssd.set_external_vcc(config[CONF_EXTERNAL_VCC]))
if CONF_LAMBDA in config:
for lambda_ in process_lambda(config[CONF_LAMBDA],
[(display.DisplayBufferRef, 'it')], return_type=void):
yield
add(ssd.set_writer(lambda_))
display.setup_display(ssd, config)
setup_component(ssd, config)
def to_code(config):
for remote in get_variable(config[CONF_REMOTE_RECEIVER_ID]):
yield
rhs = receiver_base(config)
receiver = Pvariable(config[CONF_RECEIVER_ID], rhs)
binary_sensor.register_binary_sensor(remote.add_decoder(receiver), config)
def to_code(config):
hub = None
for hub in get_variable(config[CONF_ESP32_TOUCH_ID]):
yield
touch_pad = TOUCH_PADS[config[CONF_PIN]]
rhs = hub.make_touch_pad(config[CONF_NAME], touch_pad, config[CONF_THRESHOLD])
binary_sensor.register_binary_sensor(rhs, config)
def to_code(config):
rhs = App.make_fast_led_light(config[CONF_NAME])
make = variable(config[CONF_MAKE_ID], rhs)
fast_led = make.Pfast_led
rgb_order = None
if CONF_RGB_ORDER in config:
rgb_order = RawExpression(config[CONF_RGB_ORDER])
template_args = TemplateArguments(RawExpression(config[CONF_CHIPSET]),
config[CONF_DATA_PIN],
config[CONF_CLOCK_PIN], rgb_order)
add(fast_led.add_leds(template_args, config[CONF_NUM_LEDS]))
if CONF_MAX_REFRESH_RATE in config:
add(fast_led.set_max_refresh_rate(config[CONF_MAX_REFRESH_RATE]))
if CONF_POWER_SUPPLY in config:
for power_supply in get_variable(config[CONF_POWER_SUPPLY]):
yield
add(fast_led.set_power_supply(power_supply))
if CONF_COLOR_CORRECT in config:
r, g, b = config[CONF_COLOR_CORRECT]
add(fast_led.set_correction(r, g, b))
light.setup_light(make.Pstate, make.Pmqtt, config)
setup_component(fast_led, config)
def to_code(config):
for output_ in get_variable(config[CONF_OUTPUT]):
yield
rhs = App.make_output_switch(config[CONF_NAME], output_)
make = variable(config[CONF_MAKE_ID], rhs)
switch_ = make.Pswitch_
switch.setup_switch(switch_, make.Pmqtt, config)
setup_component(switch, config)
def to_code(config):
for hub in get_variable(config[CONF_ADS1115_ID]):
yield
mux = MUX[config[CONF_MULTIPLEXER]]
gain = GAIN[config[CONF_GAIN]]
rhs = hub.get_sensor(config[CONF_NAME], mux, gain,
config.get(CONF_UPDATE_INTERVAL))
sensor.register_sensor(rhs, config)
def to_code(config):
for red in get_variable(config[CONF_RED]):
yield
for green in get_variable(config[CONF_GREEN]):
yield
for blue in get_variable(config[CONF_BLUE]):
yield
for cold_white in get_variable(config[CONF_COLD_WHITE]):
yield
for warm_white in get_variable(config[CONF_WARM_WHITE]):
yield
rhs = App.make_rgbww_light(config[CONF_NAME],
config[CONF_COLD_WHITE_COLOR_TEMPERATURE],
config[CONF_WARM_WHITE_COLOR_TEMPERATURE], red,
green, blue, cold_white, warm_white)
light_struct = variable(config[CONF_MAKE_ID], rhs)
light.setup_light(light_struct.Pstate, light_struct.Pmqtt, config)
setup_component(light_struct.Pstate, config)
def stepper_set_target_to_code(config, action_id, arg_type, template_arg):
for var in get_variable(config[CONF_ID]):
yield None
rhs = var.make_set_target_action(template_arg)
type = SetTargetAction.template(arg_type)
action = Pvariable(action_id, rhs, type=type)
for template_ in templatable(config[CONF_TARGET], arg_type, int32):
yield None
add(action.set_target(template_))
yield action
def stepper_report_position_to_code(config, action_id, arg_type, template_arg):
for var in get_variable(config[CONF_ID]):
yield None
rhs = var.make_report_position_action(template_arg)
type = ReportPositionAction.template(arg_type)
action = Pvariable(action_id, rhs, type=type)
for template_ in templatable(config[CONF_POSITION], arg_type, int32):
yield None
add(action.set_target(template_))
yield action
def to_code(config):
for uart_ in get_variable(config[CONF_UART_ID]):
yield
data = config[CONF_DATA]
if isinstance(data, str):
data = [HexInt(ord(x)) for x in data]
rhs = App.make_uart_switch(uart_, config[CONF_NAME],
ArrayInitializer(*data, multiline=False))
restart = variable(config[CONF_MAKE_ID], rhs)
switch.setup_switch(restart.Puart, restart.Pmqtt, config)
def to_code(config):
for hub in get_variable(config[CONF_DALLAS_ID]):
yield
if CONF_ADDRESS in config:
address = HexIntLiteral(config[CONF_ADDRESS])
rhs = hub.Pget_sensor_by_address(config[CONF_NAME], address,
config.get(CONF_RESOLUTION))
else:
rhs = hub.Pget_sensor_by_index(config[CONF_NAME], config[CONF_INDEX],
config.get(CONF_RESOLUTION))
sensor.register_sensor(rhs, config)
def light_turn_off_to_code(config, action_id, arg_type, template_arg):
for var in get_variable(config[CONF_ID]):
yield None
rhs = var.make_turn_off_action(template_arg)
type = TurnOffAction.template(template_arg)
action = Pvariable(action_id, rhs, type=type)
if CONF_TRANSITION_LENGTH in config:
for template_ in templatable(config[CONF_TRANSITION_LENGTH], arg_type, uint32):
yield None
add(action.set_transition_length(template_))
yield action
def to_code(config):
for spi_ in get_variable(config[CONF_SPI_ID]):
yield
for cs in gpio_output_pin_expression(config[CONF_CS_PIN]):
yield
rhs = App.make_max6675_sensor(config[CONF_NAME], spi_, cs,
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
max6675 = make.Pmax6675
sensor.setup_sensor(max6675, make.Pmqtt, config)
setup_component(max6675, config)
def to_code(config):
for output_ in get_variable(config[CONF_OUTPUT]):
yield
rhs = App.make_fan(config[CONF_NAME])
fan_struct = variable(config[CONF_MAKE_ID], rhs)
if CONF_SPEED in config:
speeds = config[CONF_SPEED]
add(
fan_struct.Poutput.set_speed(output_, speeds[CONF_LOW],
speeds[CONF_MEDIUM],
speeds[CONF_HIGH]))
else:
add(fan_struct.Poutput.set_speed(output_))
if CONF_OSCILLATION_OUTPUT in config:
for oscillation_output in get_variable(
config[CONF_OSCILLATION_OUTPUT]):
yield
add(fan_struct.Poutput.set_oscillation(oscillation_output))
fan.setup_fan(fan_struct.Pstate, fan_struct.Pmqtt, config)
def sensor_in_range_to_code(config, condition_id, arg_type, template_arg):
for var in get_variable(config[CONF_ID]):
yield None
rhs = var.make_sensor_in_range_condition(template_arg)
type = SensorInRangeCondition.template(arg_type)
cond = Pvariable(condition_id, rhs, type=type)
if CONF_ABOVE in config:
add(cond.set_min(config[CONF_ABOVE]))
if CONF_BELOW in config:
add(cond.set_max(config[CONF_BELOW]))
yield cond
def to_code(config):
for spi_ in get_variable(config[CONF_SPI_ID]):
yield
for cs in gpio_output_pin_expression(config[CONF_CS_PIN]):
yield
rhs = App.make_pn532_component(spi_, cs, config.get(CONF_UPDATE_INTERVAL))
pn532 = Pvariable(config[CONF_ID], rhs)
for conf_ in config.get(CONF_ON_TAG, []):
trigger = Pvariable(conf_[CONF_TRIGGER_ID], pn532.make_trigger())
automation.build_automation(trigger, std_string, conf_)
setup_component(pn532, config)
def to_code(config):
for uart_ in get_variable(config[CONF_UART_ID]):
yield
rhs = App.make_nextion(uart_)
nextion = Pvariable(config[CONF_ID], rhs)
if CONF_LAMBDA in config:
for lambda_ in process_lambda(config[CONF_LAMBDA],
[(NextionRef, 'it')]):
yield
add(nextion.set_writer(lambda_))
display.setup_display(nextion, config)
setup_component(nextion, config)
def to_code(config):
for uart_ in get_variable(config[CONF_UART_ID]):
yield
rhs = App.make_mhz19_sensor(uart_, config[CONF_CO2][CONF_NAME],
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
mhz19 = make.Pmhz19
Pvariable(config[CONF_ID], mhz19)
sensor.setup_sensor(mhz19.Pget_co2_sensor(), make.Pmqtt, config[CONF_CO2])
if CONF_TEMPERATURE in config:
sensor.register_sensor(mhz19.Pmake_temperature_sensor(config[CONF_TEMPERATURE][CONF_NAME]),
config[CONF_TEMPERATURE])
setup_component(mhz19, config)
def fan_turn_on_to_code(config, action_id, arg_type, template_arg):
for var in get_variable(config[CONF_ID]):
yield None
rhs = var.make_turn_on_action(template_arg)
type = TurnOnAction.template(arg_type)
action = Pvariable(action_id, rhs, type=type)
if CONF_OSCILLATING in config:
for template_ in templatable(config[CONF_OSCILLATING], arg_type, bool_):
yield None
add(action.set_oscillating(template_))
if CONF_SPEED in config:
for template_ in templatable(config[CONF_SPEED], arg_type, FanSpeed):
yield None
add(action.set_speed(template_))
yield action
def light_turn_on_to_code(config, action_id, arg_type, template_arg):
for var in get_variable(config[CONF_ID]):
yield None
rhs = var.make_turn_on_action(template_arg)
type = TurnOnAction.template(template_arg)
action = Pvariable(action_id, rhs, type=type)
if CONF_TRANSITION_LENGTH in config:
for template_ in templatable(config[CONF_TRANSITION_LENGTH], arg_type,
uint32):
yield None
add(action.set_transition_length(template_))
if CONF_FLASH_LENGTH in config:
for template_ in templatable(config[CONF_FLASH_LENGTH], arg_type,
uint32):
yield None
add(action.set_flash_length(template_))
if CONF_BRIGHTNESS in config:
for template_ in templatable(config[CONF_BRIGHTNESS], arg_type,
float_):
yield None
add(action.set_brightness(template_))
if CONF_RED in config:
for template_ in templatable(config[CONF_RED], arg_type, float_):
yield None
add(action.set_red(template_))
if CONF_GREEN in config:
for template_ in templatable(config[CONF_GREEN], arg_type, float_):
yield None
add(action.set_green(template_))
if CONF_BLUE in config:
for template_ in templatable(config[CONF_BLUE], arg_type, float_):
yield None
add(action.set_blue(template_))
if CONF_WHITE in config:
for template_ in templatable(config[CONF_WHITE], arg_type, float_):
yield None
add(action.set_white(template_))
if CONF_COLOR_TEMPERATURE in config:
for template_ in templatable(config[CONF_COLOR_TEMPERATURE], arg_type,
float_):
yield None
add(action.set_color_temperature(template_))
if CONF_EFFECT in config:
for template_ in templatable(config[CONF_EFFECT], arg_type,
std_string):
yield None
add(action.set_effect(template_))
yield action
def to_code(config):
for remote in get_variable(config[CONF_REMOTE_TRANSMITTER_ID]):
yield
rhs = transmitter_base(config)
transmitter = Pvariable(config[CONF_TRANSMITTER_ID], rhs)
if CONF_REPEAT in config:
if isinstance(config[CONF_REPEAT], int):
times = config[CONF_REPEAT]
wait_us = 1000
else:
times = config[CONF_REPEAT][CONF_TIMES]
wait_us = config[CONF_REPEAT][CONF_WAIT_TIME]
add(transmitter.set_repeat(times, wait_us))
switch.register_switch(remote.add_transmitter(transmitter), config)
