def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
"skeinforge_application.skeinforge_plugins.craft_plugins.chop.html", self
)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(), "Open File to be Chopped", self, ""
)
self.addExtraTopLayerIfNecessary = settings.BooleanSetting().getFromValue(
"Add Extra Top Layer if Necessary", self, True
)
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue("Add Layer Template to SVG", self, True)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(
0.0, "Extra Decimal Places (float):", self, 3.0, 2.0
)
self.importCoarseness = settings.FloatSpin().getFromValue(0.5, "Import Coarseness (ratio):", self, 2.0, 1.0)
self.layerThickness = settings.FloatSpin().getFromValue(0.1, "Layer Thickness (mm):", self, 1.0, 0.4)
self.layersFrom = settings.IntSpin().getFromValue(0, "Layers From (index):", self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, "Layers To (index):", self, 912345678, 912345678
)
self.meshTypeLabel = settings.LabelDisplay().getFromName("Mesh Type: ", self)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(importLatentStringVar, "Correct Mesh", self, True)
self.unprovenMesh = settings.Radio().getFromRadio(importLatentStringVar, "Unproven Mesh", self, False)
self.perimeterWidth = settings.FloatSpin().getFromValue(0.4, "Perimeter Width (mm):", self, 4.0, 2.0)
settings.LabelSeparator().getFromRepository(self)
self.svgViewer = settings.StringSetting().getFromValue("SVG Viewer:", self, "webbrowser")
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = "Chop"
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.carve.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getTranslatorFileTypeTuples(), 'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Carve')
settings.LabelDisplay().getFromName('- MAIN SETTINGS for Extrusion -', self )
settings.LabelSeparator().getFromRepository(self)
self.layerThickness = settings.FloatSpin().getFromValue( 0.1, 'Layer Height = Extrusion Thickness (mm):', self, 1.0, 0.4 )
self.perimeterWidthOverThickness = settings.FloatSpin().getFromValue( 0.2, 'Extrusion Width (mm):', self, 1.0, 0.6 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers to print -', self )
self.layersFrom = settings.IntSpin().getFromValue( 0, 'Print from Layer No::', self, 3333, 0 )
self.layersTo = settings.IntSpin().getSingleIncrementFromValue( 0, 'Print up to Layer No:', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Do not touch those below -', self )
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName('Mesh Type: ', self )
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Correct Mesh', self, True )
self.unprovenMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Unproven Mesh', self, False )
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue('Add Layer Template to SVG', self, True)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(1.0, 'Extra Decimal Places (float):', self, 4.0, 3.0)
self.importCoarseness = settings.FloatSpin().getFromValue( 0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0 )
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
def __init__(self):
"""Set the default settings, execute title & settings fileName."""
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.carve.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getTranslatorFileTypeTuples(), 'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Carve')
settings.LabelDisplay().getFromName('- MAIN SETTINGS for Extrusion -', self )
settings.LabelSeparator().getFromRepository(self)
self.extrusionHeight = settings.FloatSpin().getFromValue( 0.1, 'Layer Height = Extrusion Thickness (mm):', self, 1.0, 0.4 )
self.extrusionWidth = settings.FloatSpin().getFromValue( 0.2, 'Extrusion Width (mm):', self, 1.0, 0.6 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers to print -', self )
self.layersFrom = settings.IntSpin().getFromValue( 0, 'Print from Layer No::', self, 3333, 0 )
self.layersTo = settings.IntSpin().getSingleIncrementFromValue( 0, 'Print up to Layer No:', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Checked for technical parts, unchecked for organic pieces -', self )
self.infillInDirectionOfBridge = settings.BooleanSetting().getFromValue('Infill in Direction of Bridge', self, True )
settings.LabelSeparator().getFromRepository(self)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Do not touch those below -', self )
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName('Mesh Type: ', self )
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Correct Mesh', self, True )
self.unprovenMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Unproven Mesh', self, False )
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue('Add Layer Template to SVG', self, True)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(0.0, 'Extra Decimal Places (float):', self, 3.0, 2.0)
self.importCoarseness = settings.FloatSpin().getFromValue( 0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0 )
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.cleave.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(),
'Open File to be Cleaved', self, '')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue(
'Add Layer Template to SVG', self, True)
self.edgeWidth = settings.FloatSpin().getFromValue(
0.4, 'Edge Width (mm):', self, 4.0, 2.0)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(
0.0, 'Extra Decimal Places (float):', self, 3.0, 2.0)
self.importCoarseness = settings.FloatSpin().getFromValue(
0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0)
self.layerHeight = settings.FloatSpin().getFromValue(
0.1, 'Layer Height (mm):', self, 1.0, 0.4)
self.layersFrom = settings.IntSpin().getFromValue(
0, 'Layers From (index):', self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers To (index):', self, 912345678, 912345678)
self.meshTypeLabel = settings.LabelDisplay().getFromName(
'Mesh Type: ',
self,
)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Correct Mesh', self, True)
self.unprovenMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Unproven Mesh', self, False)
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Cleave'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge.skeinforge_tools.craft_plugins.cleave.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(),
'Open File to be Cleaved', self, '')
self.extraDecimalPlaces = settings.IntSpin().getFromValue(
0, 'Extra Decimal Places (integer):', self, 2, 1)
self.importCoarseness = settings.FloatSpin().getFromValue(
0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0)
self.layerThickness = settings.FloatSpin().getFromValue(
0.1, 'Layer Thickness (mm):', self, 1.0, 0.4)
self.layersFrom = settings.IntSpin().getFromValue(
0, 'Layers From (index):', self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers To (index):', self, 912345678, 912345678)
self.meshTypeLabel = settings.LabelDisplay().getFromName(
'Mesh Type: ',
self,
)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Correct Mesh', self, True)
self.unprovenMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Unproven Mesh', self, False)
self.perimeterWidth = settings.FloatSpin().getFromValue(
0.4, 'Perimeter Width (mm):', self, 4.0, 2.0)
self.executeTitle = 'Cleave'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.carve.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getTranslatorFileTypeTuples(), 'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Carve')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue('Add Layer Template to SVG', self, True)
self.edgeWidth = settings.FloatSpin().getFromValue( 0.1, 'Edge Width (mm):', self, 2.2, 0.4 )
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(0.0, 'Extra Decimal Places (float):', self, 3.0, 2.0)
self.importCoarseness = settings.FloatSpin().getFromValue( 0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0 )
self.layerHeight = settings.FloatSpin().getFromValue( 0.1, 'Layer Height (mm):', self, 1.0, 0.2 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self )
self.layersFrom = settings.IntSpin().getFromValue( 0, 'Layers From (index):', self, 20, 0 )
self.layersTo = settings.IntSpin().getSingleIncrementFromValue( 0, 'Layers To (index):', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName('Mesh Type: ', self )
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Correct Mesh', self, True )
self.unprovenMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Unproven Mesh', self, False )
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
self.flipX = settings.BooleanSetting().getFromValue('FlipX', self, False)
self.flipY = settings.BooleanSetting().getFromValue('FlipY', self, False)
self.flipZ = settings.BooleanSetting().getFromValue('FlipZ', self, False)
self.swapXZ = settings.BooleanSetting().getFromValue('SwapXZ', self, False)
self.swapYZ = settings.BooleanSetting().getFromValue('SwapYZ', self, False)
self.centerX = settings.FloatSpin().getFromValue(0.0, 'CenterX', self, 1000.0, 0.0)
self.centerY = settings.FloatSpin().getFromValue(0.0, 'CenterY', self, 1000.0, 0.0)
self.scale = settings.FloatSpin().getFromValue( 0.1, 'Scale', self, 10.0, 1.0 )
self.rotate = settings.FloatSpin().getFromValue( -180.0, 'Rotate', self, 180.0, 0.0 )
self.alternativeCenter = settings.StringSetting().getFromValue('AlternativeCenterFile', self, '')
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.carve.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getTranslatorFileTypeTuples(), 'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Carve')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue('Add Layer Template to SVG', self, True)
self.bridgeThicknessMultiplier = settings.FloatSpin().getFromValue( 0.8, 'Bridge Thickness Multiplier (ratio):', self, 1.2, 1.0 )
self.extraDecimalPlaces = settings.IntSpin().getFromValue( 0, 'Extra Decimal Places (integer):', self, 2, 1 )
self.importCoarseness = settings.FloatSpin().getFromValue( 0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0 )
self.infillDirectionBridge = settings.BooleanSetting().getFromValue('Infill in Direction of Bridges', self, True )
self.layerThickness = settings.FloatSpin().getFromValue( 0.1, 'Layer Thickness (mm):', self, 1.0, 0.4 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self )
self.layersFrom = settings.IntSpin().getFromValue( 0, 'Layers From (index):', self, 20, 0 )
self.layersTo = settings.IntSpin().getSingleIncrementFromValue( 0, 'Layers To (index):', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName('Mesh Type: ', self )
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Correct Mesh', self, True )
self.unprovenMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Unproven Mesh', self, False )
self.perimeterWidthOverThickness = settings.FloatSpin().getFromValue( 1.4, 'Perimeter Width over Thickness (ratio):', self, 2.2, 1.8 )
settings.LabelSeparator().getFromRepository(self)
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.carve.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(),
'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Carve')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue(
'Add Layer Template to SVG', self, True)
self.edgeWidth = settings.FloatSpin().getFromValue(
0.1, 'Edge Width (mm):', self, 2.2, 0.4)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(
0.0, 'Extra Decimal Places (float):', self, 3.0, 2.0)
self.importCoarseness = settings.FloatSpin().getFromValue(
0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0)
self.layerHeight = settings.FloatSpin().getFromValue(
0.1, 'Layer Height (mm):', self, 1.0, 0.2)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self)
self.layersFrom = settings.IntSpin().getFromValue(
0, 'Layers From (index):', self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers To (index):', self, 912345678, 912345678)
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName(
'Mesh Type: ', self)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Correct Mesh', self, True)
self.unprovenMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Unproven Mesh', self, False)
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
self.flipX = settings.BooleanSetting().getFromValue(
'FlipX', self, False)
self.flipY = settings.BooleanSetting().getFromValue(
'FlipY', self, False)
self.flipZ = settings.BooleanSetting().getFromValue(
'FlipZ', self, False)
self.swapXZ = settings.BooleanSetting().getFromValue(
'SwapXZ', self, False)
self.swapYZ = settings.BooleanSetting().getFromValue(
'SwapYZ', self, False)
self.centerX = settings.FloatSpin().getFromValue(
0.0, 'CenterX', self, 1000.0, 0.0)
self.centerY = settings.FloatSpin().getFromValue(
0.0, 'CenterY', self, 1000.0, 0.0)
self.scale = settings.FloatSpin().getFromValue(0.1, 'Scale', self,
10.0, 1.0)
self.rotate = settings.FloatSpin().getFromValue(
-180.0, 'Rotate', self, 180.0, 0.0)
self.alternativeCenter = settings.StringSetting().getFromValue(
'AlternativeCenterFile', self, '')
def __init__( self ): "Set the default settings, execute title & settings fileName." skeinforge_profile.addListsToCraftTypeRepository( 'skeinforge.skeinforge_tools.craft_plugins.cleave.html', self ) self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getTranslatorFileTypeTuples(), 'Open File to be Cleaved', self, '' ) self.extraDecimalPlaces = settings.IntSpin().getFromValue( 0, 'Extra Decimal Places (integer):', self, 2, 1 ) self.importCoarseness = settings.FloatSpin().getFromValue( 0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0 ) self.layerThickness = settings.FloatSpin().getFromValue( 0.1, 'Layer Thickness (mm):', self, 1.0, 0.4 ) self.layersFrom = settings.IntSpin().getFromValue( 0, 'Layers From (index):', self, 20, 0 ) self.layersTo = settings.IntSpin().getSingleIncrementFromValue( 0, 'Layers To (index):', self, 912345678, 912345678 ) self.meshTypeLabel = settings.LabelDisplay().getFromName( 'Mesh Type: ', self, ) importLatentStringVar = settings.LatentStringVar() self.correctMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Correct Mesh', self, True ) self.unprovenMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Unproven Mesh', self, False ) self.perimeterWidth = settings.FloatSpin().getFromValue( 0.4, 'Perimeter Width (mm):', self, 4.0, 2.0 ) self.executeTitle = 'Cleave'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.cleave.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getTranslatorFileTypeTuples(), 'Open File to be Cleaved', self, '')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue('Add Layer Template to SVG', self, True)
self.edgeWidth = settings.FloatSpin().getFromValue( 0.4, 'Edge Width (mm):', self, 4.0, 2.0 )
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(0.0, 'Extra Decimal Places (float):', self, 3.0, 2.0)
self.importCoarseness = settings.FloatSpin().getFromValue( 0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0 )
self.layerHeight = settings.FloatSpin().getFromValue( 0.1, 'Layer Height (mm):', self, 1.0, 0.4 )
self.layersFrom = settings.IntSpin().getFromValue( 0, 'Layers From (index):', self, 20, 0 )
self.layersTo = settings.IntSpin().getSingleIncrementFromValue( 0, 'Layers To (index):', self, 912345678, 912345678 )
self.meshTypeLabel = settings.LabelDisplay().getFromName('Mesh Type: ', self, )
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Correct Mesh', self, True )
self.unprovenMesh = settings.Radio().getFromRadio( importLatentStringVar, 'Unproven Mesh', self, False )
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Cleave'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.carve.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(),
'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Carve'
)
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue(
'Add Layer Template to SVG', self, True)
self.bridgeThicknessMultiplier = settings.FloatSpin().getFromValue(
0.8, 'Bridge Thickness Multiplier (ratio):', self, 1.2, 1.0)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(
0.0, 'Extra Decimal Places (float):', self, 2.0, 1.0)
self.importCoarseness = settings.FloatSpin().getFromValue(
0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0)
self.infillDirectionBridge = settings.BooleanSetting().getFromValue(
'Infill in Direction of Bridges', self, True)
self.layerThickness = settings.FloatSpin().getFromValue(
0.1, 'Layer Thickness (mm):', self, 1.0, 0.4)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self)
self.layersFrom = settings.IntSpin().getFromValue(
0, 'Layers From (index):', self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers To (index):', self, 912345678, 912345678)
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName(
'Mesh Type: ', self)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Correct Mesh', self, True)
self.unprovenMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Unproven Mesh', self, False)
self.perimeterWidthOverThickness = settings.FloatSpin().getFromValue(
1.4, 'Perimeter Width over Thickness (ratio):', self, 2.2, 1.8)
settings.LabelSeparator().getFromRepository(self)
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
"skeinforge_application.skeinforge_plugins.craft_plugins.carve.html", self
)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(), "Open File for Carve", self, ""
)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
"http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Carve"
)
settings.LabelDisplay().getFromName("- MAIN SETTINGS for Extrusion -", self)
settings.LabelSeparator().getFromRepository(self)
self.layerThickness = settings.FloatSpin().getFromValue(
0.1, "Layer Height = Extrusion Thickness (mm):", self, 1.0, 0.4
)
self.perimeterWidthOverThickness = settings.FloatSpin().getFromValue(
0.2, "Extrusion Width (mm):", self, 1.0, 0.6
)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName("- Layers to print -", self)
self.layersFrom = settings.IntSpin().getFromValue(0, "Print from Layer No::", self, 3333, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, "Print up to Layer No:", self, 912345678, 912345678
)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName("- Do not touch those below -", self)
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName("Mesh Type: ", self)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(importLatentStringVar, "Correct Mesh", self, True)
self.unprovenMesh = settings.Radio().getFromRadio(importLatentStringVar, "Unproven Mesh", self, False)
self.svgViewer = settings.StringSetting().getFromValue("SVG Viewer:", self, "webbrowser")
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue("Add Layer Template to SVG", self, True)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(
1.0, "Extra Decimal Places (float):", self, 4.0, 3.0
)
self.importCoarseness = settings.FloatSpin().getFromValue(0.5, "Import Coarseness (ratio):", self, 2.0, 1.0)
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = "Carve"
